DRM: add mode setting support

Add mode setting support to the DRM layer.

This is a fairly big chunk of work that allows DRM drivers to provide
full output control and configuration capabilities to userspace.  It was
motivated by several factors:
  - the fb layer's APIs aren't suited for anything but simple
    configurations
  - coordination between the fb layer, DRM layer, and various userspace
    drivers is poor to non-existent (radeonfb excepted)
  - user level mode setting drivers makes displaying panic & oops
    messages more difficult
  - suspend/resume of graphics state is possible in many more
    configurations with kernel level support

This commit just adds the core DRM part of the mode setting APIs.
Driver specific commits using these new structure and APIs will follow.

Co-authors: Jesse Barnes <jbarnes@virtuousgeek.org>, Jakob Bornecrantz <jakob@tungstengraphics.com>
Contributors: Alan Hourihane <alanh@tungstengraphics.com>, Maarten Maathuis <madman2003@gmail.com>

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

12 files changed, 5087 insertions, 40 deletions

diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 74da99495e2..30022c4a5c1 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -9,7 +9,8 @@ drm-y       :=	drm_auth.o drm_bufs.o drm_cache.o \
 		drm_drv.o drm_fops.o drm_gem.o drm_ioctl.o drm_irq.o \
 		drm_lock.o drm_memory.o drm_proc.o drm_stub.o drm_vm.o \
 		drm_agpsupport.o drm_scatter.o ati_pcigart.o drm_pci.o \
-		drm_sysfs.o drm_hashtab.o drm_sman.o drm_mm.o
+		drm_sysfs.o drm_hashtab.o drm_sman.o drm_mm.o \
+		drm_crtc.o drm_crtc_helper.o drm_modes.o drm_edid.o
 
 drm-$(CONFIG_COMPAT) += drm_ioc32.o
 
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
new file mode 100644
index 00000000000..2e880240477
--- /dev/null
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -0,0 +1,2497 @@
+/*
+ * Copyright (c) 2006-2008 Intel Corporation
+ * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (c) 2008 Red Hat Inc.
+ *
+ * DRM core CRTC related functions
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ *
+ * Authors:
+ *      Keith Packard
+ *	Eric Anholt <eric@anholt.net>
+ *      Dave Airlie <airlied@linux.ie>
+ *      Jesse Barnes <jesse.barnes@intel.com>
+ */
+#include <linux/list.h>
+#include "drm.h"
+#include "drmP.h"
+#include "drm_crtc.h"
+
+struct drm_prop_enum_list {
+	int type;
+	char *name;
+};
+
+/* Avoid boilerplate.  I'm tired of typing. */
+#define DRM_ENUM_NAME_FN(fnname, list)				\
+	char *fnname(int val)					\
+	{							\
+		int i;						\
+		for (i = 0; i < ARRAY_SIZE(list); i++) {	\
+			if (list[i].type == val)		\
+				return list[i].name;		\
+		}						\
+		return "(unknown)";				\
+	}
+
+/*
+ * Global properties
+ */
+static struct drm_prop_enum_list drm_dpms_enum_list[] =
+{	{ DRM_MODE_DPMS_ON, "On" },
+	{ DRM_MODE_DPMS_STANDBY, "Standby" },
+	{ DRM_MODE_DPMS_SUSPEND, "Suspend" },
+	{ DRM_MODE_DPMS_OFF, "Off" }
+};
+
+DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
+
+/*
+ * Optional properties
+ */
+static struct drm_prop_enum_list drm_scaling_mode_enum_list[] =
+{
+	{ DRM_MODE_SCALE_NON_GPU, "Non-GPU" },
+	{ DRM_MODE_SCALE_FULLSCREEN, "Fullscreen" },
+	{ DRM_MODE_SCALE_NO_SCALE, "No scale" },
+	{ DRM_MODE_SCALE_ASPECT, "Aspect" },
+};
+
+static struct drm_prop_enum_list drm_dithering_mode_enum_list[] =
+{
+	{ DRM_MODE_DITHERING_OFF, "Off" },
+	{ DRM_MODE_DITHERING_ON, "On" },
+};
+
+/*
+ * Non-global properties, but "required" for certain connectors.
+ */
+static struct drm_prop_enum_list drm_dvi_i_select_enum_list[] =
+{
+	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
+	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
+	{ DRM_MODE_SUBCONNECTOR_DVIA,      "DVI-A"     }, /* DVI-I  */
+};
+
+DRM_ENUM_NAME_FN(drm_get_dvi_i_select_name, drm_dvi_i_select_enum_list)
+
+static struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] =
+{
+	{ DRM_MODE_SUBCONNECTOR_Unknown,   "Unknown"   }, /* DVI-I and TV-out */
+	{ DRM_MODE_SUBCONNECTOR_DVID,      "DVI-D"     }, /* DVI-I  */
+	{ DRM_MODE_SUBCONNECTOR_DVIA,      "DVI-A"     }, /* DVI-I  */
+};
+
+DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
+		 drm_dvi_i_subconnector_enum_list)
+
+static struct drm_prop_enum_list drm_tv_select_enum_list[] =
+{
+	{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
+	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_SVIDEO,    "SVIDEO"    }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
+};
+
+DRM_ENUM_NAME_FN(drm_get_tv_select_name, drm_tv_select_enum_list)
+
+static struct drm_prop_enum_list drm_tv_subconnector_enum_list[] =
+{
+	{ DRM_MODE_SUBCONNECTOR_Unknown,   "Unknown"   }, /* DVI-I and TV-out */
+	{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_SVIDEO,    "SVIDEO"    }, /* TV-out */
+	{ DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
+};
+
+DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
+		 drm_tv_subconnector_enum_list)
+
+struct drm_conn_prop_enum_list {
+	int type;
+	char *name;
+	int count;
+};
+
+/*
+ * Connector and encoder types.
+ */
+static struct drm_conn_prop_enum_list drm_connector_enum_list[] =
+{	{ DRM_MODE_CONNECTOR_Unknown, "Unknown", 0 },
+	{ DRM_MODE_CONNECTOR_VGA, "VGA", 0 },
+	{ DRM_MODE_CONNECTOR_DVII, "DVI-I", 0 },
+	{ DRM_MODE_CONNECTOR_DVID, "DVI-D", 0 },
+	{ DRM_MODE_CONNECTOR_DVIA, "DVI-A", 0 },
+	{ DRM_MODE_CONNECTOR_Composite, "Composite", 0 },
+	{ DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO", 0 },
+	{ DRM_MODE_CONNECTOR_LVDS, "LVDS", 0 },
+	{ DRM_MODE_CONNECTOR_Component, "Component", 0 },
+	{ DRM_MODE_CONNECTOR_9PinDIN, "9-pin DIN", 0 },
+	{ DRM_MODE_CONNECTOR_DisplayPort, "DisplayPort", 0 },
+	{ DRM_MODE_CONNECTOR_HDMIA, "HDMI Type A", 0 },
+	{ DRM_MODE_CONNECTOR_HDMIB, "HDMI Type B", 0 },
+};
+
+static struct drm_prop_enum_list drm_encoder_enum_list[] =
+{	{ DRM_MODE_ENCODER_NONE, "None" },
+	{ DRM_MODE_ENCODER_DAC, "DAC" },
+	{ DRM_MODE_ENCODER_TMDS, "TMDS" },
+	{ DRM_MODE_ENCODER_LVDS, "LVDS" },
+	{ DRM_MODE_ENCODER_TVDAC, "TV" },
+};
+
+char *drm_get_encoder_name(struct drm_encoder *encoder)
+{
+	static char buf[32];
+
+	snprintf(buf, 32, "%s-%d",
+		 drm_encoder_enum_list[encoder->encoder_type].name,
+		 encoder->base.id);
+	return buf;
+}
+
+char *drm_get_connector_name(struct drm_connector *connector)
+{
+	static char buf[32];
+
+	snprintf(buf, 32, "%s-%d",
+		 drm_connector_enum_list[connector->connector_type].name,
+		 connector->connector_type_id);
+	return buf;
+}
+EXPORT_SYMBOL(drm_get_connector_name);
+
+char *drm_get_connector_status_name(enum drm_connector_status status)
+{
+	if (status == connector_status_connected)
+		return "connected";
+	else if (status == connector_status_disconnected)
+		return "disconnected";
+	else
+		return "unknown";
+}
+
+/**
+ * drm_mode_object_get - allocate a new identifier
+ * @dev: DRM device
+ * @ptr: object pointer, used to generate unique ID
+ * @type: object type
+ *
+ * LOCKING:
+ * Caller must hold DRM mode_config lock.
+ *
+ * Create a unique identifier based on @ptr in @dev's identifier space.  Used
+ * for tracking modes, CRTCs and connectors.
+ *
+ * RETURNS:
+ * New unique (relative to other objects in @dev) integer identifier for the
+ * object.
+ */
+static int drm_mode_object_get(struct drm_device *dev,
+			       struct drm_mode_object *obj, uint32_t obj_type)
+{
+	int new_id = 0;
+	int ret;
+
+	WARN(!mutex_is_locked(&dev->mode_config.mutex),
+	     "%s called w/o mode_config lock\n", __FUNCTION__);
+again:
+	if (idr_pre_get(&dev->mode_config.crtc_idr, GFP_KERNEL) == 0) {
+		DRM_ERROR("Ran out memory getting a mode number\n");
+		return -EINVAL;
+	}
+
+	ret = idr_get_new_above(&dev->mode_config.crtc_idr, obj, 1, &new_id);
+	if (ret == -EAGAIN)
+		goto again;
+
+	obj->id = new_id;
+	obj->type = obj_type;
+	return 0;
+}
+
+/**
+ * drm_mode_object_put - free an identifer
+ * @dev: DRM device
+ * @id: ID to free
+ *
+ * LOCKING:
+ * Caller must hold DRM mode_config lock.
+ *
+ * Free @id from @dev's unique identifier pool.
+ */
+static void drm_mode_object_put(struct drm_device *dev,
+				struct drm_mode_object *object)
+{
+	idr_remove(&dev->mode_config.crtc_idr, object->id);
+}
+
+void *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type)
+{
+	struct drm_mode_object *obj;
+
+	obj = idr_find(&dev->mode_config.crtc_idr, id);
+	if (!obj || (obj->type != type) || (obj->id != id))
+		return NULL;
+
+	return obj;
+}
+EXPORT_SYMBOL(drm_mode_object_find);
+
+/**
+ * drm_crtc_from_fb - find the CRTC structure associated with an fb
+ * @dev: DRM device
+ * @fb: framebuffer in question
+ *
+ * LOCKING:
+ * Caller must hold mode_config lock.
+ *
+ * Find CRTC in the mode_config structure that matches @fb.
+ *
+ * RETURNS:
+ * Pointer to the CRTC or NULL if it wasn't found.
+ */
+struct drm_crtc *drm_crtc_from_fb(struct drm_device *dev,
+				  struct drm_framebuffer *fb)
+{
+	struct drm_crtc *crtc;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		if (crtc->fb == fb)
+			return crtc;
+	}
+	return NULL;
+}
+
+/**
+ * drm_framebuffer_init - initialize a framebuffer
+ * @dev: DRM device
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Allocates an ID for the framebuffer's parent mode object, sets its mode
+ * functions & device file and adds it to the master fd list.
+ *
+ * RETURNS:
+ * Zero on success, error code on falure.
+ */
+int drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb,
+			 const struct drm_framebuffer_funcs *funcs)
+{
+	int ret;
+
+	ret = drm_mode_object_get(dev, &fb->base, DRM_MODE_OBJECT_FB);
+	if (ret) {
+		return ret;
+	}
+
+	fb->dev = dev;
+	fb->funcs = funcs;
+	dev->mode_config.num_fb++;
+	list_add(&fb->head, &dev->mode_config.fb_list);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_framebuffer_init);
+
+/**
+ * drm_framebuffer_cleanup - remove a framebuffer object
+ * @fb: framebuffer to remove
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Scans all the CRTCs in @dev's mode_config.  If they're using @fb, removes
+ * it, setting it to NULL.
+ */
+void drm_framebuffer_cleanup(struct drm_framebuffer *fb)
+{
+	struct drm_device *dev = fb->dev;
+	struct drm_crtc *crtc;
+
+	/* remove from any CRTC */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		if (crtc->fb == fb)
+			crtc->fb = NULL;
+	}
+
+	drm_mode_object_put(dev, &fb->base);
+	list_del(&fb->head);
+	dev->mode_config.num_fb--;
+}
+EXPORT_SYMBOL(drm_framebuffer_cleanup);
+
+/**
+ * drm_crtc_init - Initialise a new CRTC object
+ * @dev: DRM device
+ * @crtc: CRTC object to init
+ * @funcs: callbacks for the new CRTC
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Inits a new object created as base part of an driver crtc object.
+ */
+void drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
+		   const struct drm_crtc_funcs *funcs)
+{
+	crtc->dev = dev;
+	crtc->funcs = funcs;
+
+	mutex_lock(&dev->mode_config.mutex);
+	drm_mode_object_get(dev, &crtc->base, DRM_MODE_OBJECT_CRTC);
+
+	list_add_tail(&crtc->head, &dev->mode_config.crtc_list);
+	dev->mode_config.num_crtc++;
+	mutex_unlock(&dev->mode_config.mutex);
+}
+EXPORT_SYMBOL(drm_crtc_init);
+
+/**
+ * drm_crtc_cleanup - Cleans up the core crtc usage.
+ * @crtc: CRTC to cleanup
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Cleanup @crtc. Removes from drm modesetting space
+ * does NOT free object, caller does that.
+ */
+void drm_crtc_cleanup(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+
+	if (crtc->gamma_store) {
+		kfree(crtc->gamma_store);
+		crtc->gamma_store = NULL;
+	}
+
+	drm_mode_object_put(dev, &crtc->base);
+	list_del(&crtc->head);
+	dev->mode_config.num_crtc--;
+}
+EXPORT_SYMBOL(drm_crtc_cleanup);
+
+/**
+ * drm_mode_probed_add - add a mode to a connector's probed mode list
+ * @connector: connector the new mode
+ * @mode: mode data
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Add @mode to @connector's mode list for later use.
+ */
+void drm_mode_probed_add(struct drm_connector *connector,
+			 struct drm_display_mode *mode)
+{
+	list_add(&mode->head, &connector->probed_modes);
+}
+EXPORT_SYMBOL(drm_mode_probed_add);
+
+/**
+ * drm_mode_remove - remove and free a mode
+ * @connector: connector list to modify
+ * @mode: mode to remove
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Remove @mode from @connector's mode list, then free it.
+ */
+void drm_mode_remove(struct drm_connector *connector,
+		     struct drm_display_mode *mode)
+{
+	list_del(&mode->head);
+	kfree(mode);
+}
+EXPORT_SYMBOL(drm_mode_remove);
+
+/**
+ * drm_connector_init - Init a preallocated connector
+ * @dev: DRM device
+ * @connector: the connector to init
+ * @funcs: callbacks for this connector
+ * @name: user visible name of the connector
+ *
+ * LOCKING:
+ * Caller must hold @dev's mode_config lock.
+ *
+ * Initialises a preallocated connector. Connectors should be
+ * subclassed as part of driver connector objects.
+ */
+void drm_connector_init(struct drm_device *dev,
+		     struct drm_connector *connector,
+		     const struct drm_connector_funcs *funcs,
+		     int connector_type)
+{
+	mutex_lock(&dev->mode_config.mutex);
+
+	connector->dev = dev;
+	connector->funcs = funcs;
+	drm_mode_object_get(dev, &connector->base, DRM_MODE_OBJECT_CONNECTOR);
+	connector->connector_type = connector_type;
+	connector->connector_type_id =
+		++drm_connector_enum_list[connector_type].count; /* TODO */
+	INIT_LIST_HEAD(&connector->user_modes);
+	INIT_LIST_HEAD(&connector->probed_modes);
+	INIT_LIST_HEAD(&connector->modes);
+	connector->edid_blob_ptr = NULL;
+
+	list_add_tail(&connector->head, &dev->mode_config.connector_list);
+	dev->mode_config.num_connector++;
+
+	drm_connector_attach_property(connector,
+				      dev->mode_config.edid_property, 0);
+
+	drm_connector_attach_property(connector,
+				      dev->mode_config.dpms_property, 0);
+
+	mutex_unlock(&dev->mode_config.mutex);
+}
+EXPORT_SYMBOL(drm_connector_init);
+
+/**
+ * drm_connector_cleanup - cleans up an initialised connector
+ * @connector: connector to cleanup
+ *
+ * LOCKING:
+ * Caller must hold @dev's mode_config lock.
+ *
+ * Cleans up the connector but doesn't free the object.
+ */
+void drm_connector_cleanup(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_display_mode *mode, *t;
+
+	list_for_each_entry_safe(mode, t, &connector->probed_modes, head)
+		drm_mode_remove(connector, mode);
+
+	list_for_each_entry_safe(mode, t, &connector->modes, head)
+		drm_mode_remove(connector, mode);
+
+	list_for_each_entry_safe(mode, t, &connector->user_modes, head)
+		drm_mode_remove(connector, mode);
+
+	mutex_lock(&dev->mode_config.mutex);
+	drm_mode_object_put(dev, &connector->base);
+	list_del(&connector->head);
+	mutex_unlock(&dev->mode_config.mutex);
+}
+EXPORT_SYMBOL(drm_connector_cleanup);
+
+void drm_encoder_init(struct drm_device *dev,
+		      struct drm_encoder *encoder,
+		      const struct drm_encoder_funcs *funcs,
+		      int encoder_type)
+{
+	mutex_lock(&dev->mode_config.mutex);
+
+	encoder->dev = dev;
+
+	drm_mode_object_get(dev, &encoder->base, DRM_MODE_OBJECT_ENCODER);
+	encoder->encoder_type = encoder_type;
+	encoder->funcs = funcs;
+
+	list_add_tail(&encoder->head, &dev->mode_config.encoder_list);
+	dev->mode_config.num_encoder++;
+
+	mutex_unlock(&dev->mode_config.mutex);
+}
+EXPORT_SYMBOL(drm_encoder_init);
+
+void drm_encoder_cleanup(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	mutex_lock(&dev->mode_config.mutex);
+	drm_mode_object_put(dev, &encoder->base);
+	list_del(&encoder->head);
+	mutex_unlock(&dev->mode_config.mutex);
+}
+EXPORT_SYMBOL(drm_encoder_cleanup);
+
+/**
+ * drm_mode_create - create a new display mode
+ * @dev: DRM device
+ *
+ * LOCKING:
+ * Caller must hold DRM mode_config lock.
+ *
+ * Create a new drm_display_mode, give it an ID, and return it.
+ *
+ * RETURNS:
+ * Pointer to new mode on success, NULL on error.
+ */
+struct drm_display_mode *drm_mode_create(struct drm_device *dev)
+{
+	struct drm_display_mode *nmode;
+
+	nmode = kzalloc(sizeof(struct drm_display_mode), GFP_KERNEL);
+	if (!nmode)
+		return NULL;
+
+	drm_mode_object_get(dev, &nmode->base, DRM_MODE_OBJECT_MODE);
+	return nmode;
+}
+EXPORT_SYMBOL(drm_mode_create);
+
+/**
+ * drm_mode_destroy - remove a mode
+ * @dev: DRM device
+ * @mode: mode to remove
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Free @mode's unique identifier, then free it.
+ */
+void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode)
+{
+	drm_mode_object_put(dev, &mode->base);
+
+	kfree(mode);
+}
+EXPORT_SYMBOL(drm_mode_destroy);
+
+static int drm_mode_create_standard_connector_properties(struct drm_device *dev)
+{
+	struct drm_property *edid;
+	struct drm_property *dpms;
+	int i;
+
+	/*
+	 * Standard properties (apply to all connectors)
+	 */
+	edid = drm_property_create(dev, DRM_MODE_PROP_BLOB |
+				   DRM_MODE_PROP_IMMUTABLE,
+				   "EDID", 0);
+	dev->mode_config.edid_property = edid;
+
+	dpms = drm_property_create(dev, DRM_MODE_PROP_ENUM,
+				   "DPMS", ARRAY_SIZE(drm_dpms_enum_list));
+	for (i = 0; i < ARRAY_SIZE(drm_dpms_enum_list); i++)
+		drm_property_add_enum(dpms, i, drm_dpms_enum_list[i].type,
+				      drm_dpms_enum_list[i].name);
+	dev->mode_config.dpms_property = dpms;
+
+	return 0;
+}
+
+/**
+ * drm_mode_create_dvi_i_properties - create DVI-I specific connector properties
+ * @dev: DRM device
+ *
+ * Called by a driver the first time a DVI-I connector is made.
+ */
+int drm_mode_create_dvi_i_properties(struct drm_device *dev)
+{
+	struct drm_property *dvi_i_selector;
+	struct drm_property *dvi_i_subconnector;
+	int i;
+
+	if (dev->mode_config.dvi_i_select_subconnector_property)
+		return 0;
+
+	dvi_i_selector =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM,
+				    "select subconnector",
+				    ARRAY_SIZE(drm_dvi_i_select_enum_list));
+	for (i = 0; i < ARRAY_SIZE(drm_dvi_i_select_enum_list); i++)
+		drm_property_add_enum(dvi_i_selector, i,
+				      drm_dvi_i_select_enum_list[i].type,
+				      drm_dvi_i_select_enum_list[i].name);
+	dev->mode_config.dvi_i_select_subconnector_property = dvi_i_selector;
+
+	dvi_i_subconnector =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM |
+				    DRM_MODE_PROP_IMMUTABLE,
+				    "subconnector",
+				    ARRAY_SIZE(drm_dvi_i_subconnector_enum_list));
+	for (i = 0; i < ARRAY_SIZE(drm_dvi_i_subconnector_enum_list); i++)
+		drm_property_add_enum(dvi_i_subconnector, i,
+				      drm_dvi_i_subconnector_enum_list[i].type,
+				      drm_dvi_i_subconnector_enum_list[i].name);
+	dev->mode_config.dvi_i_subconnector_property = dvi_i_subconnector;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_dvi_i_properties);
+
+/**
+ * drm_create_tv_properties - create TV specific connector properties
+ * @dev: DRM device
+ * @num_modes: number of different TV formats (modes) supported
+ * @modes: array of pointers to strings containing name of each format
+ *
+ * Called by a driver's TV initialization routine, this function creates
+ * the TV specific connector properties for a given device.  Caller is
+ * responsible for allocating a list of format names and passing them to
+ * this routine.
+ */
+int drm_mode_create_tv_properties(struct drm_device *dev, int num_modes,
+				  char *modes[])
+{
+	struct drm_property *tv_selector;
+	struct drm_property *tv_subconnector;
+	int i;
+
+	if (dev->mode_config.tv_select_subconnector_property)
+		return 0;
+
+	/*
+	 * Basic connector properties
+	 */
+	tv_selector = drm_property_create(dev, DRM_MODE_PROP_ENUM,
+					  "select subconnector",
+					  ARRAY_SIZE(drm_tv_select_enum_list));
+	for (i = 0; i < ARRAY_SIZE(drm_tv_select_enum_list); i++)
+		drm_property_add_enum(tv_selector, i,
+				      drm_tv_select_enum_list[i].type,
+				      drm_tv_select_enum_list[i].name);
+	dev->mode_config.tv_select_subconnector_property = tv_selector;
+
+	tv_subconnector =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM |
+				    DRM_MODE_PROP_IMMUTABLE, "subconnector",
+				    ARRAY_SIZE(drm_tv_subconnector_enum_list));
+	for (i = 0; i < ARRAY_SIZE(drm_tv_subconnector_enum_list); i++)
+		drm_property_add_enum(tv_subconnector, i,
+				      drm_tv_subconnector_enum_list[i].type,
+				      drm_tv_subconnector_enum_list[i].name);
+	dev->mode_config.tv_subconnector_property = tv_subconnector;
+
+	/*
+	 * Other, TV specific properties: margins & TV modes.
+	 */
+	dev->mode_config.tv_left_margin_property =
+		drm_property_create(dev, DRM_MODE_PROP_RANGE,
+				    "left margin", 2);
+	dev->mode_config.tv_left_margin_property->values[0] = 0;
+	dev->mode_config.tv_left_margin_property->values[1] = 100;
+
+	dev->mode_config.tv_right_margin_property =
+		drm_property_create(dev, DRM_MODE_PROP_RANGE,
+				    "right margin", 2);
+	dev->mode_config.tv_right_margin_property->values[0] = 0;
+	dev->mode_config.tv_right_margin_property->values[1] = 100;
+
+	dev->mode_config.tv_top_margin_property =
+		drm_property_create(dev, DRM_MODE_PROP_RANGE,
+				    "top margin", 2);
+	dev->mode_config.tv_top_margin_property->values[0] = 0;
+	dev->mode_config.tv_top_margin_property->values[1] = 100;
+
+	dev->mode_config.tv_bottom_margin_property =
+		drm_property_create(dev, DRM_MODE_PROP_RANGE,
+				    "bottom margin", 2);
+	dev->mode_config.tv_bottom_margin_property->values[0] = 0;
+	dev->mode_config.tv_bottom_margin_property->values[1] = 100;
+
+	dev->mode_config.tv_mode_property =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM,
+				    "mode", num_modes);
+	for (i = 0; i < num_modes; i++)
+		drm_property_add_enum(dev->mode_config.tv_mode_property, i,
+				      i, modes[i]);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_tv_properties);
+
+/**
+ * drm_mode_create_scaling_mode_property - create scaling mode property
+ * @dev: DRM device
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * connectors.
+ */
+int drm_mode_create_scaling_mode_property(struct drm_device *dev)
+{
+	struct drm_property *scaling_mode;
+	int i;
+
+	if (dev->mode_config.scaling_mode_property)
+		return 0;
+
+	scaling_mode =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM, "scaling mode",
+				    ARRAY_SIZE(drm_scaling_mode_enum_list));
+	for (i = 0; i < ARRAY_SIZE(drm_scaling_mode_enum_list); i++)
+		drm_property_add_enum(scaling_mode, i,
+				      drm_scaling_mode_enum_list[i].type,
+				      drm_scaling_mode_enum_list[i].name);
+
+	dev->mode_config.scaling_mode_property = scaling_mode;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
+
+/**
+ * drm_mode_create_dithering_property - create dithering property
+ * @dev: DRM device
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * connectors.
+ */
+int drm_mode_create_dithering_property(struct drm_device *dev)
+{
+	struct drm_property *dithering_mode;
+	int i;
+
+	if (dev->mode_config.dithering_mode_property)
+		return 0;
+
+	dithering_mode =
+		drm_property_create(dev, DRM_MODE_PROP_ENUM, "dithering",
+				    ARRAY_SIZE(drm_dithering_mode_enum_list));
+	for (i = 0; i < ARRAY_SIZE(drm_dithering_mode_enum_list); i++)
+		drm_property_add_enum(dithering_mode, i,
+				      drm_dithering_mode_enum_list[i].type,
+				      drm_dithering_mode_enum_list[i].name);
+	dev->mode_config.dithering_mode_property = dithering_mode;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_dithering_property);
+
+/**
+ * drm_mode_config_init - initialize DRM mode_configuration structure
+ * @dev: DRM device
+ *
+ * LOCKING:
+ * None, should happen single threaded at init time.
+ *
+ * Initialize @dev's mode_config structure, used for tracking the graphics
+ * configuration of @dev.
+ */
+void drm_mode_config_init(struct drm_device *dev)
+{
+	mutex_init(&dev->mode_config.mutex);
+	INIT_LIST_HEAD(&dev->mode_config.fb_list);
+	INIT_LIST_HEAD(&dev->mode_config.fb_kernel_list);
+	INIT_LIST_HEAD(&dev->mode_config.crtc_list);
+	INIT_LIST_HEAD(&dev->mode_config.connector_list);
+	INIT_LIST_HEAD(&dev->mode_config.encoder_list);
+	INIT_LIST_HEAD(&dev->mode_config.property_list);
+	INIT_LIST_HEAD(&dev->mode_config.property_blob_list);
+	idr_init(&dev->mode_config.crtc_idr);
+
+	mutex_lock(&dev->mode_config.mutex);
+	drm_mode_create_standard_connector_properties(dev);
+	mutex_unlock(&dev->mode_config.mutex);
+
+	/* Just to be sure */
+	dev->mode_config.num_fb = 0;
+	dev->mode_config.num_connector = 0;
+	dev->mode_config.num_crtc = 0;
+	dev->mode_config.num_encoder = 0;
+	dev->mode_config.hotplug_counter = 0;
+}
+EXPORT_SYMBOL(drm_mode_config_init);
+
+int drm_mode_group_init(struct drm_device *dev, struct drm_mode_group *group)
+{
+	uint32_t total_objects = 0;
+
+	total_objects += dev->mode_config.num_crtc;
+	total_objects += dev->mode_config.num_connector;
+	total_objects += dev->mode_config.num_encoder;
+
+	if (total_objects == 0)
+		return -EINVAL;
+
+	group->id_list = kzalloc(total_objects * sizeof(uint32_t), GFP_KERNEL);
+	if (!group->id_list)
+		return -ENOMEM;
+
+	group->num_crtcs = 0;
+	group->num_connectors = 0;
+	group->num_encoders = 0;
+	return 0;
+}
+
+int drm_mode_group_init_legacy_group(struct drm_device *dev,
+				     struct drm_mode_group *group)
+{
+	struct drm_crtc *crtc;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+	int ret;
+
+	if ((ret = drm_mode_group_init(dev, group)))
+		return ret;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
+		group->id_list[group->num_crtcs++] = crtc->base.id;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
+		group->id_list[group->num_crtcs + group->num_encoders++] =
+		encoder->base.id;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		group->id_list[group->num_crtcs + group->num_encoders +
+			       group->num_connectors++] = connector->base.id;
+
+	return 0;
+}
+
+/**
+ * drm_mode_config_cleanup - free up DRM mode_config info
+ * @dev: DRM device
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Free up all the connectors and CRTCs associated with this DRM device, then
+ * free up the framebuffers and associated buffer objects.
+ *
+ * FIXME: cleanup any dangling user buffer objects too
+ */
+void drm_mode_config_cleanup(struct drm_device *dev)
+{
+	struct drm_connector *connector, *ot;
+	struct drm_crtc *crtc, *ct;
+	struct drm_encoder *encoder, *enct;
+	struct drm_framebuffer *fb, *fbt;
+	struct drm_property *property, *pt;
+
+	list_for_each_entry_safe(encoder, enct, &dev->mode_config.encoder_list,
+				 head) {
+		encoder->funcs->destroy(encoder);
+	}
+
+	list_for_each_entry_safe(connector, ot,
+				 &dev->mode_config.connector_list, head) {
+		connector->funcs->destroy(connector);
+	}
+
+	list_for_each_entry_safe(property, pt, &dev->mode_config.property_list,
+				 head) {
+		drm_property_destroy(dev, property);
+	}
+
+	list_for_each_entry_safe(fb, fbt, &dev->mode_config.fb_list, head) {
+		fb->funcs->destroy(fb);
+	}
+
+	list_for_each_entry_safe(crtc, ct, &dev->mode_config.crtc_list, head) {
+		crtc->funcs->destroy(crtc);
+	}
+
+}
+EXPORT_SYMBOL(drm_mode_config_cleanup);
+
+int drm_mode_hotplug_ioctl(struct drm_device *dev,
+			   void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_hotplug *arg = data;
+
+	arg->counter = dev->mode_config.hotplug_counter;
+
+	return 0;
+}
+
+/**
+ * drm_crtc_convert_to_umode - convert a drm_display_mode into a modeinfo
+ * @out: drm_mode_modeinfo struct to return to the user
+ * @in: drm_display_mode to use
+ *
+ * LOCKING:
+ * None.
+ *
+ * Convert a drm_display_mode into a drm_mode_modeinfo structure to return to
+ * the user.
+ */
+void drm_crtc_convert_to_umode(struct drm_mode_modeinfo *out,
+			       struct drm_display_mode *in)
+{
+	out->clock = in->clock;
+	out->hdisplay = in->hdisplay;
+	out->hsync_start = in->hsync_start;
+	out->hsync_end = in->hsync_end;
+	out->htotal = in->htotal;
+	out->hskew = in->hskew;
+	out->vdisplay = in->vdisplay;
+	out->vsync_start = in->vsync_start;
+	out->vsync_end = in->vsync_end;
+	out->vtotal = in->vtotal;
+	out->vscan = in->vscan;
+	out->vrefresh = in->vrefresh;
+	out->flags = in->flags;
+	out->type = in->type;
+	strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN);
+	out->name[DRM_DISPLAY_MODE_LEN-1] = 0;
+}
+
+/**
+ * drm_crtc_convert_to_umode - convert a modeinfo into a drm_display_mode
+ * @out: drm_display_mode to return to the user
+ * @in: drm_mode_modeinfo to use
+ *
+ * LOCKING:
+ * None.
+ *
+ * Convert a drm_mode_modeinfo into a drm_display_mode structure to return to
+ * the caller.
+ */
+void drm_crtc_convert_umode(struct drm_display_mode *out,
+			    struct drm_mode_modeinfo *in)
+{
+	out->clock = in->clock;
+	out->hdisplay = in->hdisplay;
+	out->hsync_start = in->hsync_start;
+	out->hsync_end = in->hsync_end;
+	out->htotal = in->htotal;
+	out->hskew = in->hskew;
+	out->vdisplay = in->vdisplay;
+	out->vsync_start = in->vsync_start;
+	out->vsync_end = in->vsync_end;
+	out->vtotal = in->vtotal;
+	out->vscan = in->vscan;
+	out->vrefresh = in->vrefresh;
+	out->flags = in->flags;
+	out->type = in->type;
+	strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN);
+	out->name[DRM_DISPLAY_MODE_LEN-1] = 0;
+}
+
+/**
+ * drm_mode_getresources - get graphics configuration
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * LOCKING:
+ * Takes mode config lock.
+ *
+ * Construct a set of configuration description structures and return
+ * them to the user, including CRTC, connector and framebuffer configuration.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_getresources(struct drm_device *dev, void *data,
+			  struct drm_file *file_priv)
+{
+	struct drm_mode_card_res *card_res = data;
+	struct list_head *lh;
+	struct drm_framebuffer *fb;
+	struct drm_connector *connector;
+	struct drm_crtc *crtc;
+	struct drm_encoder *encoder;
+	int ret = 0;
+	int connector_count = 0;
+	int crtc_count = 0;
+	int fb_count = 0;
+	int encoder_count = 0;
+	int copied = 0, i;
+	uint32_t __user *fb_id;
+	uint32_t __user *crtc_id;
+	uint32_t __user *connector_id;
+	uint32_t __user *encoder_id;
+	struct drm_mode_group *mode_group;
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	/*
+	 * For the non-control nodes we need to limit the list of resources
+	 * by IDs in the group list for this node
+	 */
+	list_for_each(lh, &file_priv->fbs)
+		fb_count++;
+
+	mode_group = &file_priv->master->minor->mode_group;
+	if (file_priv->master->minor->type == DRM_MINOR_CONTROL) {
+
+		list_for_each(lh, &dev->mode_config.crtc_list)
+			crtc_count++;
+
+		list_for_each(lh, &dev->mode_config.connector_list)
+			connector_count++;
+
+		list_for_each(lh, &dev->mode_config.encoder_list)
+			encoder_count++;
+	} else {
+
+		crtc_count = mode_group->num_crtcs;
+		connector_count = mode_group->num_connectors;
+		encoder_count = mode_group->num_encoders;
+	}
+
+	card_res->max_height = dev->mode_config.max_height;
+	card_res->min_height = dev->mode_config.min_height;
+	card_res->max_width = dev->mode_config.max_width;
+	card_res->min_width = dev->mode_config.min_width;
+
+	/* handle this in 4 parts */
+	/* FBs */
+	if (card_res->count_fbs >= fb_count) {
+		copied = 0;
+		fb_id = (uint32_t __user *)(unsigned long)card_res->fb_id_ptr;
+		list_for_each_entry(fb, &file_priv->fbs, head) {
+			if (put_user(fb->base.id, fb_id + copied)) {
+				ret = -EFAULT;
+				goto out;
+			}
+			copied++;
+		}
+	}
+	card_res->count_fbs = fb_count;
+
+	/* CRTCs */
+	if (card_res->count_crtcs >= crtc_count) {
+		copied = 0;
+		crtc_id = (uint32_t __user *)(unsigned long)card_res->crtc_id_ptr;
+		if (file_priv->master->minor->type == DRM_MINOR_CONTROL) {
+			list_for_each_entry(crtc, &dev->mode_config.crtc_list,
+					    head) {
+				DRM_DEBUG("CRTC ID is %d\n", crtc->base.id);
+				if (put_user(crtc->base.id, crtc_id + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+		} else {
+			for (i = 0; i < mode_group->num_crtcs; i++) {
+				if (put_user(mode_group->id_list[i],
+					     crtc_id + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+		}
+	}
+	card_res->count_crtcs = crtc_count;
+
+	/* Encoders */
+	if (card_res->count_encoders >= encoder_count) {
+		copied = 0;
+		encoder_id = (uint32_t __user *)(unsigned long)card_res->encoder_id_ptr;
+		if (file_priv->master->minor->type == DRM_MINOR_CONTROL) {
+			list_for_each_entry(encoder,
+					    &dev->mode_config.encoder_list,
+					    head) {
+				DRM_DEBUG("ENCODER ID is %d\n",
+					  encoder->base.id);
+				if (put_user(encoder->base.id, encoder_id +
+					     copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+		} else {
+			for (i = mode_group->num_crtcs; i < mode_group->num_crtcs + mode_group->num_encoders; i++) {
+				if (put_user(mode_group->id_list[i],
+					     encoder_id + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+
+		}
+	}
+	card_res->count_encoders = encoder_count;
+
+	/* Connectors */
+	if (card_res->count_connectors >= connector_count) {
+		copied = 0;
+		connector_id = (uint32_t __user *)(unsigned long)card_res->connector_id_ptr;
+		if (file_priv->master->minor->type == DRM_MINOR_CONTROL) {
+			list_for_each_entry(connector,
+					    &dev->mode_config.connector_list,
+					    head) {
+				DRM_DEBUG("CONNECTOR ID is %d\n",
+					  connector->base.id);
+				if (put_user(connector->base.id,
+					     connector_id + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+		} else {
+			int start = mode_group->num_crtcs +
+				mode_group->num_encoders;
+			for (i = start; i < start + mode_group->num_connectors; i++) {
+				if (put_user(mode_group->id_list[i],
+					     connector_id + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+		}
+	}
+	card_res->count_connectors = connector_count;
+
+	DRM_DEBUG("Counted %d %d %d\n", card_res->count_crtcs,
+		  card_res->count_connectors, card_res->count_encoders);
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+/**
+ * drm_mode_getcrtc - get CRTC configuration
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * LOCKING:
+ * Caller? (FIXME)
+ *
+ * Construct a CRTC configuration structure to return to the user.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_getcrtc(struct drm_device *dev,
+		     void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_crtc *crtc_resp = data;
+	struct drm_crtc *crtc;
+	struct drm_mode_object *obj;
+	int ret = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	obj = drm_mode_object_find(dev, crtc_resp->crtc_id,
+				   DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+
+	crtc_resp->x = crtc->x;
+	crtc_resp->y = crtc->y;
+	crtc_resp->gamma_size = crtc->gamma_size;
+	if (crtc->fb)
+		crtc_resp->fb_id = crtc->fb->base.id;
+	else
+		crtc_resp->fb_id = 0;
+
+	if (crtc->enabled) {
+
+		drm_crtc_convert_to_umode(&crtc_resp->mode, &crtc->mode);
+		crtc_resp->mode_valid = 1;
+
+	} else {
+		crtc_resp->mode_valid = 0;
+	}
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+/**
+ * drm_mode_getconnector - get connector configuration
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * LOCKING:
+ * Caller? (FIXME)
+ *
+ * Construct a connector configuration structure to return to the user.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_getconnector(struct drm_device *dev, void *data,
+			  struct drm_file *file_priv)
+{
+	struct drm_mode_get_connector *out_resp = data;
+	struct drm_mode_object *obj;
+	struct drm_connector *connector;
+	struct drm_display_mode *mode;
+	int mode_count = 0;
+	int props_count = 0;
+	int encoders_count = 0;
+	int ret = 0;
+	int copied = 0;
+	int i;
+	struct drm_mode_modeinfo u_mode;
+	struct drm_mode_modeinfo __user *mode_ptr;
+	uint32_t __user *prop_ptr;
+	uint64_t __user *prop_values;
+	uint32_t __user *encoder_ptr;
+
+	memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo));
+
+	DRM_DEBUG("connector id %d:\n", out_resp->connector_id);
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	obj = drm_mode_object_find(dev, out_resp->connector_id,
+				   DRM_MODE_OBJECT_CONNECTOR);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	connector = obj_to_connector(obj);
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) {
+		if (connector->property_ids[i] != 0) {
+			props_count++;
+		}
+	}
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+		if (connector->encoder_ids[i] != 0) {
+			encoders_count++;
+		}
+	}
+
+	if (out_resp->count_modes == 0) {
+		connector->funcs->fill_modes(connector,
+					     dev->mode_config.max_width,
+					     dev->mode_config.max_height);
+	}
+
+	/* delayed so we get modes regardless of pre-fill_modes state */
+	list_for_each_entry(mode, &connector->modes, head)
+		mode_count++;
+
+	out_resp->connector_id = connector->base.id;
+	out_resp->connector_type = connector->connector_type;
+	out_resp->connector_type_id = connector->connector_type_id;
+	out_resp->mm_width = connector->display_info.width_mm;
+	out_resp->mm_height = connector->display_info.height_mm;
+	out_resp->subpixel = connector->display_info.subpixel_order;
+	out_resp->connection = connector->status;
+	if (connector->encoder)
+		out_resp->encoder_id = connector->encoder->base.id;
+	else
+		out_resp->encoder_id = 0;
+
+	/*
+	 * This ioctl is called twice, once to determine how much space is
+	 * needed, and the 2nd time to fill it.
+	 */
+	if ((out_resp->count_modes >= mode_count) && mode_count) {
+		copied = 0;
+		mode_ptr = (struct drm_mode_modeinfo *)(unsigned long)out_resp->modes_ptr;
+		list_for_each_entry(mode, &connector->modes, head) {
+			drm_crtc_convert_to_umode(&u_mode, mode);
+			if (copy_to_user(mode_ptr + copied,
+					 &u_mode, sizeof(u_mode))) {
+				ret = -EFAULT;
+				goto out;
+			}
+			copied++;
+		}
+	}
+	out_resp->count_modes = mode_count;
+
+	if ((out_resp->count_props >= props_count) && props_count) {
+		copied = 0;
+		prop_ptr = (uint32_t *)(unsigned long)(out_resp->props_ptr);
+		prop_values = (uint64_t *)(unsigned long)(out_resp->prop_values_ptr);
+		for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) {
+			if (connector->property_ids[i] != 0) {
+				if (put_user(connector->property_ids[i],
+					     prop_ptr + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+
+				if (put_user(connector->property_values[i],
+					     prop_values + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+		}
+	}
+	out_resp->count_props = props_count;
+
+	if ((out_resp->count_encoders >= encoders_count) && encoders_count) {
+		copied = 0;
+		encoder_ptr = (uint32_t *)(unsigned long)(out_resp->encoders_ptr);
+		for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+			if (connector->encoder_ids[i] != 0) {
+				if (put_user(connector->encoder_ids[i],
+					     encoder_ptr + copied)) {
+					ret = -EFAULT;
+					goto out;
+				}
+				copied++;
+			}
+		}
+	}
+	out_resp->count_encoders = encoders_count;
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+int drm_mode_getencoder(struct drm_device *dev, void *data,
+			struct drm_file *file_priv)
+{
+	struct drm_mode_get_encoder *enc_resp = data;
+	struct drm_mode_object *obj;
+	struct drm_encoder *encoder;
+	int ret = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, enc_resp->encoder_id,
+				   DRM_MODE_OBJECT_ENCODER);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	encoder = obj_to_encoder(obj);
+
+	if (encoder->crtc)
+		enc_resp->crtc_id = encoder->crtc->base.id;
+	else
+		enc_resp->crtc_id = 0;
+	enc_resp->encoder_type = encoder->encoder_type;
+	enc_resp->encoder_id = encoder->base.id;
+	enc_resp->possible_crtcs = encoder->possible_crtcs;
+	enc_resp->possible_clones = encoder->possible_clones;
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+/**
+ * drm_mode_setcrtc - set CRTC configuration
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * LOCKING:
+ * Caller? (FIXME)
+ *
+ * Build a new CRTC configuration based on user request.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_setcrtc(struct drm_device *dev, void *data,
+		     struct drm_file *file_priv)
+{
+	struct drm_mode_config *config = &dev->mode_config;
+	struct drm_mode_crtc *crtc_req = data;
+	struct drm_mode_object *obj;
+	struct drm_crtc *crtc, *crtcfb;
+	struct drm_connector **connector_set = NULL, *connector;
+	struct drm_framebuffer *fb = NULL;
+	struct drm_display_mode *mode = NULL;
+	struct drm_mode_set set;
+	uint32_t __user *set_connectors_ptr;
+	int ret = 0;
+	int i;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, crtc_req->crtc_id,
+				   DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		DRM_DEBUG("Unknown CRTC ID %d\n", crtc_req->crtc_id);
+		ret = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+
+	if (crtc_req->mode_valid) {
+		/* If we have a mode we need a framebuffer. */
+		/* If we pass -1, set the mode with the currently bound fb */
+		if (crtc_req->fb_id == -1) {
+			list_for_each_entry(crtcfb,
+					    &dev->mode_config.crtc_list, head) {
+				if (crtcfb == crtc) {
+					DRM_DEBUG("Using current fb for setmode\n");
+					fb = crtc->fb;
+				}
+			}
+		} else {
+			obj = drm_mode_object_find(dev, crtc_req->fb_id,
+						   DRM_MODE_OBJECT_FB);
+			if (!obj) {
+				DRM_DEBUG("Unknown FB ID%d\n", crtc_req->fb_id);
+				ret = -EINVAL;
+				goto out;
+			}
+			fb = obj_to_fb(obj);
+		}
+
+		mode = drm_mode_create(dev);
+		drm_crtc_convert_umode(mode, &crtc_req->mode);
+		drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
+	}
+
+	if (crtc_req->count_connectors == 0 && mode) {
+		DRM_DEBUG("Count connectors is 0 but mode set\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (crtc_req->count_connectors > 0 && !mode && !fb) {
+		DRM_DEBUG("Count connectors is %d but no mode or fb set\n",
+			  crtc_req->count_connectors);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (crtc_req->count_connectors > 0) {
+		u32 out_id;
+
+		/* Avoid unbounded kernel memory allocation */
+		if (crtc_req->count_connectors > config->num_connector) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		connector_set = kmalloc(crtc_req->count_connectors *
+					sizeof(struct drm_connector *),
+					GFP_KERNEL);
+		if (!connector_set) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		for (i = 0; i < crtc_req->count_connectors; i++) {
+			set_connectors_ptr = (uint32_t *)(unsigned long)crtc_req->set_connectors_ptr;
+			if (get_user(out_id, &set_connectors_ptr[i])) {
+				ret = -EFAULT;
+				goto out;
+			}
+
+			obj = drm_mode_object_find(dev, out_id,
+						   DRM_MODE_OBJECT_CONNECTOR);
+			if (!obj) {
+				DRM_DEBUG("Connector id %d unknown\n", out_id);
+				ret = -EINVAL;
+				goto out;
+			}
+			connector = obj_to_connector(obj);
+
+			connector_set[i] = connector;
+		}
+	}
+
+	set.crtc = crtc;
+	set.x = crtc_req->x;
+	set.y = crtc_req->y;
+	set.mode = mode;
+	set.connectors = connector_set;
+	set.num_connectors = crtc_req->count_connectors;
+	set.fb =fb;
+	ret = crtc->funcs->set_config(&set);
+
+out:
+	kfree(connector_set);
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+int drm_mode_cursor_ioctl(struct drm_device *dev,
+			void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_cursor *req = data;
+	struct drm_mode_object *obj;
+	struct drm_crtc *crtc;
+	int ret = 0;
+
+	DRM_DEBUG("\n");
+
+	if (!req->flags) {
+		DRM_ERROR("no operation set\n");
+		return -EINVAL;
+	}
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, req->crtc, DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		DRM_DEBUG("Unknown CRTC ID %d\n", req->crtc);
+		ret = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+
+	if (req->flags & DRM_MODE_CURSOR_BO) {
+		if (!crtc->funcs->cursor_set) {
+			DRM_ERROR("crtc does not support cursor\n");
+			ret = -ENXIO;
+			goto out;
+		}
+		/* Turns off the cursor if handle is 0 */
+		ret = crtc->funcs->cursor_set(crtc, file_priv, req->handle,
+					      req->width, req->height);
+	}
+
+	if (req->flags & DRM_MODE_CURSOR_MOVE) {
+		if (crtc->funcs->cursor_move) {
+			ret = crtc->funcs->cursor_move(crtc, req->x, req->y);
+		} else {
+			DRM_ERROR("crtc does not support cursor\n");
+			ret = -EFAULT;
+			goto out;
+		}
+	}
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+/**
+ * drm_mode_addfb - add an FB to the graphics configuration
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * LOCKING:
+ * Takes mode config lock.
+ *
+ * Add a new FB to the specified CRTC, given a user request.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_addfb(struct drm_device *dev,
+		   void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_fb_cmd *r = data;
+	struct drm_mode_config *config = &dev->mode_config;
+	struct drm_framebuffer *fb;
+	int ret = 0;
+
+	if ((config->min_width > r->width) || (r->width > config->max_width)) {
+		DRM_ERROR("mode new framebuffer width not within limits\n");
+		return -EINVAL;
+	}
+	if ((config->min_height > r->height) || (r->height > config->max_height)) {
+		DRM_ERROR("mode new framebuffer height not within limits\n");
+		return -EINVAL;
+	}
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	/* TODO check buffer is sufficently large */
+	/* TODO setup destructor callback */
+
+	fb = dev->mode_config.funcs->fb_create(dev, file_priv, r);
+	if (!fb) {
+		DRM_ERROR("could not create framebuffer\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	r->buffer_id = fb->base.id;
+	list_add(&fb->filp_head, &file_priv->fbs);
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+/**
+ * drm_mode_rmfb - remove an FB from the configuration
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * LOCKING:
+ * Takes mode config lock.
+ *
+ * Remove the FB specified by the user.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_rmfb(struct drm_device *dev,
+		   void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_object *obj;
+	struct drm_framebuffer *fb = NULL;
+	struct drm_framebuffer *fbl = NULL;
+	uint32_t *id = data;
+	int ret = 0;
+	int found = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, *id, DRM_MODE_OBJECT_FB);
+	/* TODO check that we realy get a framebuffer back. */
+	if (!obj) {
+		DRM_ERROR("mode invalid framebuffer id\n");
+		ret = -EINVAL;
+		goto out;
+	}
+	fb = obj_to_fb(obj);
+
+	list_for_each_entry(fbl, &file_priv->fbs, filp_head)
+		if (fb == fbl)
+			found = 1;
+
+	if (!found) {
+		DRM_ERROR("tried to remove a fb that we didn't own\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* TODO release all crtc connected to the framebuffer */
+	/* TODO unhock the destructor from the buffer object */
+
+	list_del(&fb->filp_head);
+	fb->funcs->destroy(fb);
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+/**
+ * drm_mode_getfb - get FB info
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * LOCKING:
+ * Caller? (FIXME)
+ *
+ * Lookup the FB given its ID and return info about it.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_getfb(struct drm_device *dev,
+		   void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_fb_cmd *r = data;
+	struct drm_mode_object *obj;
+	struct drm_framebuffer *fb;
+	int ret = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, r->buffer_id, DRM_MODE_OBJECT_FB);
+	if (!obj) {
+		DRM_ERROR("invalid framebuffer id\n");
+		ret = -EINVAL;
+		goto out;
+	}
+	fb = obj_to_fb(obj);
+
+	r->height = fb->height;
+	r->width = fb->width;
+	r->depth = fb->depth;
+	r->bpp = fb->bits_per_pixel;
+	r->pitch = fb->pitch;
+	fb->funcs->create_handle(fb, file_priv, &r->handle);
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+/**
+ * drm_fb_release - remove and free the FBs on this file
+ * @filp: file * from the ioctl
+ *
+ * LOCKING:
+ * Takes mode config lock.
+ *
+ * Destroy all the FBs associated with @filp.
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+void drm_fb_release(struct file *filp)
+{
+	struct drm_file *priv = filp->private_data;
+	struct drm_device *dev = priv->minor->dev;
+	struct drm_framebuffer *fb, *tfb;
+
+	mutex_lock(&dev->mode_config.mutex);
+	list_for_each_entry_safe(fb, tfb, &priv->fbs, filp_head) {
+		list_del(&fb->filp_head);
+		fb->funcs->destroy(fb);
+	}
+	mutex_unlock(&dev->mode_config.mutex);
+}
+
+/**
+ * drm_mode_attachmode - add a mode to the user mode list
+ * @dev: DRM device
+ * @connector: connector to add the mode to
+ * @mode: mode to add
+ *
+ * Add @mode to @connector's user mode list.
+ */
+static int drm_mode_attachmode(struct drm_device *dev,
+			       struct drm_connector *connector,
+			       struct drm_display_mode *mode)
+{
+	int ret = 0;
+
+	list_add_tail(&mode->head, &connector->user_modes);
+	return ret;
+}
+
+int drm_mode_attachmode_crtc(struct drm_device *dev, struct drm_crtc *crtc,
+			     struct drm_display_mode *mode)
+{
+	struct drm_connector *connector;
+	int ret = 0;
+	struct drm_display_mode *dup_mode;
+	int need_dup = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		if (!connector->encoder)
+			break;
+		if (connector->encoder->crtc == crtc) {
+			if (need_dup)
+				dup_mode = drm_mode_duplicate(dev, mode);
+			else
+				dup_mode = mode;
+			ret = drm_mode_attachmode(dev, connector, dup_mode);
+			if (ret)
+				return ret;
+			need_dup = 1;
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_attachmode_crtc);
+
+static int drm_mode_detachmode(struct drm_device *dev,
+			       struct drm_connector *connector,
+			       struct drm_display_mode *mode)
+{
+	int found = 0;
+	int ret = 0;
+	struct drm_display_mode *match_mode, *t;
+
+	list_for_each_entry_safe(match_mode, t, &connector->user_modes, head) {
+		if (drm_mode_equal(match_mode, mode)) {
+			list_del(&match_mode->head);
+			drm_mode_destroy(dev, match_mode);
+			found = 1;
+			break;
+		}
+	}
+
+	if (!found)
+		ret = -EINVAL;
+
+	return ret;
+}
+
+int drm_mode_detachmode_crtc(struct drm_device *dev, struct drm_display_mode *mode)
+{
+	struct drm_connector *connector;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		drm_mode_detachmode(dev, connector, mode);
+	}
+	return 0;
+}
+EXPORT_SYMBOL(drm_mode_detachmode_crtc);
+
+/**
+ * drm_fb_attachmode - Attach a user mode to an connector
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * This attaches a user specified mode to an connector.
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_attachmode_ioctl(struct drm_device *dev,
+			      void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_mode_cmd *mode_cmd = data;
+	struct drm_connector *connector;
+	struct drm_display_mode *mode;
+	struct drm_mode_object *obj;
+	struct drm_mode_modeinfo *umode = &mode_cmd->mode;
+	int ret = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	obj = drm_mode_object_find(dev, mode_cmd->connector_id, DRM_MODE_OBJECT_CONNECTOR);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	connector = obj_to_connector(obj);
+
+	mode = drm_mode_create(dev);
+	if (!mode) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	drm_crtc_convert_umode(mode, umode);
+
+	ret = drm_mode_attachmode(dev, connector, mode);
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+
+/**
+ * drm_fb_detachmode - Detach a user specified mode from an connector
+ * @inode: inode from the ioctl
+ * @filp: file * from the ioctl
+ * @cmd: cmd from ioctl
+ * @arg: arg from ioctl
+ *
+ * Called by the user via ioctl.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_detachmode_ioctl(struct drm_device *dev,
+			      void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_object *obj;
+	struct drm_mode_mode_cmd *mode_cmd = data;
+	struct drm_connector *connector;
+	struct drm_display_mode mode;
+	struct drm_mode_modeinfo *umode = &mode_cmd->mode;
+	int ret = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	obj = drm_mode_object_find(dev, mode_cmd->connector_id, DRM_MODE_OBJECT_CONNECTOR);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	connector = obj_to_connector(obj);
+
+	drm_crtc_convert_umode(&mode, umode);
+	ret = drm_mode_detachmode(dev, connector, &mode);
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+struct drm_property *drm_property_create(struct drm_device *dev, int flags,
+					 const char *name, int num_values)
+{
+	struct drm_property *property = NULL;
+
+	property = kzalloc(sizeof(struct drm_property), GFP_KERNEL);
+	if (!property)
+		return NULL;
+
+	if (num_values) {
+		property->values = kzalloc(sizeof(uint64_t)*num_values, GFP_KERNEL);
+		if (!property->values)
+			goto fail;
+	}
+
+	drm_mode_object_get(dev, &property->base, DRM_MODE_OBJECT_PROPERTY);
+	property->flags = flags;
+	property->num_values = num_values;
+	INIT_LIST_HEAD(&property->enum_blob_list);
+
+	if (name)
+		strncpy(property->name, name, DRM_PROP_NAME_LEN);
+
+	list_add_tail(&property->head, &dev->mode_config.property_list);
+	return property;
+fail:
+	kfree(property);
+	return NULL;
+}
+EXPORT_SYMBOL(drm_property_create);
+
+int drm_property_add_enum(struct drm_property *property, int index,
+			  uint64_t value, const char *name)
+{
+	struct drm_property_enum *prop_enum;
+
+	if (!(property->flags & DRM_MODE_PROP_ENUM))
+		return -EINVAL;
+
+	if (!list_empty(&property->enum_blob_list)) {
+		list_for_each_entry(prop_enum, &property->enum_blob_list, head) {
+			if (prop_enum->value == value) {
+				strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN);
+				prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0';
+				return 0;
+			}
+		}
+	}
+
+	prop_enum = kzalloc(sizeof(struct drm_property_enum), GFP_KERNEL);
+	if (!prop_enum)
+		return -ENOMEM;
+
+	strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN);
+	prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0';
+	prop_enum->value = value;
+
+	property->values[index] = value;
+	list_add_tail(&prop_enum->head, &property->enum_blob_list);
+	return 0;
+}
+EXPORT_SYMBOL(drm_property_add_enum);
+
+void drm_property_destroy(struct drm_device *dev, struct drm_property *property)
+{
+	struct drm_property_enum *prop_enum, *pt;
+
+	list_for_each_entry_safe(prop_enum, pt, &property->enum_blob_list, head) {
+		list_del(&prop_enum->head);
+		kfree(prop_enum);
+	}
+
+	if (property->num_values)
+		kfree(property->values);
+	drm_mode_object_put(dev, &property->base);
+	list_del(&property->head);
+	kfree(property);
+}
+EXPORT_SYMBOL(drm_property_destroy);
+
+int drm_connector_attach_property(struct drm_connector *connector,
+			       struct drm_property *property, uint64_t init_val)
+{
+	int i;
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) {
+		if (connector->property_ids[i] == 0) {
+			connector->property_ids[i] = property->base.id;
+			connector->property_values[i] = init_val;
+			break;
+		}
+	}
+
+	if (i == DRM_CONNECTOR_MAX_PROPERTY)
+		return -EINVAL;
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_attach_property);
+
+int drm_connector_property_set_value(struct drm_connector *connector,
+				  struct drm_property *property, uint64_t value)
+{
+	int i;
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) {
+		if (connector->property_ids[i] == property->base.id) {
+			connector->property_values[i] = value;
+			break;
+		}
+	}
+
+	if (i == DRM_CONNECTOR_MAX_PROPERTY)
+		return -EINVAL;
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_property_set_value);
+
+int drm_connector_property_get_value(struct drm_connector *connector,
+				  struct drm_property *property, uint64_t *val)
+{
+	int i;
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) {
+		if (connector->property_ids[i] == property->base.id) {
+			*val = connector->property_values[i];
+			break;
+		}
+	}
+
+	if (i == DRM_CONNECTOR_MAX_PROPERTY)
+		return -EINVAL;
+	return 0;
+}
+EXPORT_SYMBOL(drm_connector_property_get_value);
+
+int drm_mode_getproperty_ioctl(struct drm_device *dev,
+			       void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_object *obj;
+	struct drm_mode_get_property *out_resp = data;
+	struct drm_property *property;
+	int enum_count = 0;
+	int blob_count = 0;
+	int value_count = 0;
+	int ret = 0, i;
+	int copied;
+	struct drm_property_enum *prop_enum;
+	struct drm_mode_property_enum __user *enum_ptr;
+	struct drm_property_blob *prop_blob;
+	uint32_t *blob_id_ptr;
+	uint64_t __user *values_ptr;
+	uint32_t __user *blob_length_ptr;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, out_resp->prop_id, DRM_MODE_OBJECT_PROPERTY);
+	if (!obj) {
+		ret = -EINVAL;
+		goto done;
+	}
+	property = obj_to_property(obj);
+
+	if (property->flags & DRM_MODE_PROP_ENUM) {
+		list_for_each_entry(prop_enum, &property->enum_blob_list, head)
+			enum_count++;
+	} else if (property->flags & DRM_MODE_PROP_BLOB) {
+		list_for_each_entry(prop_blob, &property->enum_blob_list, head)
+			blob_count++;
+	}
+
+	value_count = property->num_values;
+
+	strncpy(out_resp->name, property->name, DRM_PROP_NAME_LEN);
+	out_resp->name[DRM_PROP_NAME_LEN-1] = 0;
+	out_resp->flags = property->flags;
+
+	if ((out_resp->count_values >= value_count) && value_count) {
+		values_ptr = (uint64_t *)(unsigned long)out_resp->values_ptr;
+		for (i = 0; i < value_count; i++) {
+			if (copy_to_user(values_ptr + i, &property->values[i], sizeof(uint64_t))) {
+				ret = -EFAULT;
+				goto done;
+			}
+		}
+	}
+	out_resp->count_values = value_count;
+
+	if (property->flags & DRM_MODE_PROP_ENUM) {
+		if ((out_resp->count_enum_blobs >= enum_count) && enum_count) {
+			copied = 0;
+			enum_ptr = (struct drm_mode_property_enum *)(unsigned long)out_resp->enum_blob_ptr;
+			list_for_each_entry(prop_enum, &property->enum_blob_list, head) {
+
+				if (copy_to_user(&enum_ptr[copied].value, &prop_enum->value, sizeof(uint64_t))) {
+					ret = -EFAULT;
+					goto done;
+				}
+
+				if (copy_to_user(&enum_ptr[copied].name,
+						 &prop_enum->name, DRM_PROP_NAME_LEN)) {
+					ret = -EFAULT;
+					goto done;
+				}
+				copied++;
+			}
+		}
+		out_resp->count_enum_blobs = enum_count;
+	}
+
+	if (property->flags & DRM_MODE_PROP_BLOB) {
+		if ((out_resp->count_enum_blobs >= blob_count) && blob_count) {
+			copied = 0;
+			blob_id_ptr = (uint32_t *)(unsigned long)out_resp->enum_blob_ptr;
+			blob_length_ptr = (uint32_t *)(unsigned long)out_resp->values_ptr;
+
+			list_for_each_entry(prop_blob, &property->enum_blob_list, head) {
+				if (put_user(prop_blob->base.id, blob_id_ptr + copied)) {
+					ret = -EFAULT;
+					goto done;
+				}
+
+				if (put_user(prop_blob->length, blob_length_ptr + copied)) {
+					ret = -EFAULT;
+					goto done;
+				}
+
+				copied++;
+			}
+		}
+		out_resp->count_enum_blobs = blob_count;
+	}
+done:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+static struct drm_property_blob *drm_property_create_blob(struct drm_device *dev, int length,
+							  void *data)
+{
+	struct drm_property_blob *blob;
+
+	if (!length || !data)
+		return NULL;
+
+	blob = kzalloc(sizeof(struct drm_property_blob)+length, GFP_KERNEL);
+	if (!blob)
+		return NULL;
+
+	blob->data = (void *)((char *)blob + sizeof(struct drm_property_blob));
+	blob->length = length;
+
+	memcpy(blob->data, data, length);
+
+	drm_mode_object_get(dev, &blob->base, DRM_MODE_OBJECT_BLOB);
+
+	list_add_tail(&blob->head, &dev->mode_config.property_blob_list);
+	return blob;
+}
+
+static void drm_property_destroy_blob(struct drm_device *dev,
+			       struct drm_property_blob *blob)
+{
+	drm_mode_object_put(dev, &blob->base);
+	list_del(&blob->head);
+	kfree(blob);
+}
+
+int drm_mode_getblob_ioctl(struct drm_device *dev,
+			   void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_object *obj;
+	struct drm_mode_get_blob *out_resp = data;
+	struct drm_property_blob *blob;
+	int ret = 0;
+	void *blob_ptr;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, out_resp->blob_id, DRM_MODE_OBJECT_BLOB);
+	if (!obj) {
+		ret = -EINVAL;
+		goto done;
+	}
+	blob = obj_to_blob(obj);
+
+	if (out_resp->length == blob->length) {
+		blob_ptr = (void *)(unsigned long)out_resp->data;
+		if (copy_to_user(blob_ptr, blob->data, blob->length)){
+			ret = -EFAULT;
+			goto done;
+		}
+	}
+	out_resp->length = blob->length;
+
+done:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+int drm_mode_connector_update_edid_property(struct drm_connector *connector,
+					    struct edid *edid)
+{
+	struct drm_device *dev = connector->dev;
+	int ret = 0;
+
+	if (connector->edid_blob_ptr)
+		drm_property_destroy_blob(dev, connector->edid_blob_ptr);
+
+	/* Delete edid, when there is none. */
+	if (!edid) {
+		connector->edid_blob_ptr = NULL;
+		ret = drm_connector_property_set_value(connector, dev->mode_config.edid_property, 0);
+		return ret;
+	}
+
+	connector->edid_blob_ptr = drm_property_create_blob(connector->dev, 128, edid);
+
+	ret = drm_connector_property_set_value(connector,
+					       dev->mode_config.edid_property,
+					       connector->edid_blob_ptr->base.id);
+
+	return ret;
+}
+EXPORT_SYMBOL(drm_mode_connector_update_edid_property);
+
+int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
+				       void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_connector_set_property *out_resp = data;
+	struct drm_mode_object *obj;
+	struct drm_property *property;
+	struct drm_connector *connector;
+	int ret = -EINVAL;
+	int i;
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	obj = drm_mode_object_find(dev, out_resp->connector_id, DRM_MODE_OBJECT_CONNECTOR);
+	if (!obj) {
+		goto out;
+	}
+	connector = obj_to_connector(obj);
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_PROPERTY; i++) {
+		if (connector->property_ids[i] == out_resp->prop_id)
+			break;
+	}
+
+	if (i == DRM_CONNECTOR_MAX_PROPERTY) {
+		goto out;
+	}
+
+	obj = drm_mode_object_find(dev, out_resp->prop_id, DRM_MODE_OBJECT_PROPERTY);
+	if (!obj) {
+		goto out;
+	}
+	property = obj_to_property(obj);
+
+	if (property->flags & DRM_MODE_PROP_IMMUTABLE)
+		goto out;
+
+	if (property->flags & DRM_MODE_PROP_RANGE) {
+		if (out_resp->value < property->values[0])
+			goto out;
+
+		if (out_resp->value > property->values[1])
+			goto out;
+	} else {
+		int found = 0;
+		for (i = 0; i < property->num_values; i++) {
+			if (property->values[i] == out_resp->value) {
+				found = 1;
+				break;
+			}
+		}
+		if (!found) {
+			goto out;
+		}
+	}
+
+	if (connector->funcs->set_property)
+		ret = connector->funcs->set_property(connector, property, out_resp->value);
+
+	/* store the property value if succesful */
+	if (!ret)
+		drm_connector_property_set_value(connector, property, out_resp->value);
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
+
+
+int drm_mode_replacefb(struct drm_device *dev,
+		       void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_fb_cmd *r = data;
+	struct drm_mode_object *obj;
+	struct drm_framebuffer *fb;
+	int found = 0;
+	struct drm_framebuffer *fbl = NULL;
+	int ret = 0;
+
+	/* right replace the current bo attached to this fb with a new bo */
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, r->buffer_id, DRM_MODE_OBJECT_FB);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	fb = obj_to_fb(obj);
+
+	list_for_each_entry(fbl, &file_priv->fbs, filp_head)
+		if (fb == fbl)
+			found = 1;
+
+	if (!found) {
+		DRM_ERROR("tried to replace an fb we didn't own\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (dev->mode_config.funcs->resize_fb)
+		ret = dev->mode_config.funcs->resize_fb(dev, file_priv, fb, r);
+	else
+		ret = -EINVAL;
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+
+}
+
+int drm_mode_connector_attach_encoder(struct drm_connector *connector,
+				      struct drm_encoder *encoder)
+{
+	int i;
+
+	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+		if (connector->encoder_ids[i] == 0) {
+			connector->encoder_ids[i] = encoder->base.id;
+			return 0;
+		}
+	}
+	return -ENOMEM;
+}
+EXPORT_SYMBOL(drm_mode_connector_attach_encoder);
+
+void drm_mode_connector_detach_encoder(struct drm_connector *connector,
+				    struct drm_encoder *encoder)
+{
+	int i;
+	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+		if (connector->encoder_ids[i] == encoder->base.id) {
+			connector->encoder_ids[i] = 0;
+			if (connector->encoder == encoder)
+				connector->encoder = NULL;
+			break;
+		}
+	}
+}
+EXPORT_SYMBOL(drm_mode_connector_detach_encoder);
+
+bool drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
+				  int gamma_size)
+{
+	crtc->gamma_size = gamma_size;
+
+	crtc->gamma_store = kzalloc(gamma_size * sizeof(uint16_t) * 3, GFP_KERNEL);
+	if (!crtc->gamma_store) {
+		crtc->gamma_size = 0;
+		return false;
+	}
+
+	return true;
+}
+EXPORT_SYMBOL(drm_mode_crtc_set_gamma_size);
+
+int drm_mode_gamma_set_ioctl(struct drm_device *dev,
+			     void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_crtc_lut *crtc_lut = data;
+	struct drm_mode_object *obj;
+	struct drm_crtc *crtc;
+	void *r_base, *g_base, *b_base;
+	int size;
+	int ret = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, crtc_lut->crtc_id, DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+
+	/* memcpy into gamma store */
+	if (crtc_lut->gamma_size != crtc->gamma_size) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	size = crtc_lut->gamma_size * (sizeof(uint16_t));
+	r_base = crtc->gamma_store;
+	if (copy_from_user(r_base, (void __user *)(unsigned long)crtc_lut->red, size)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	g_base = r_base + size;
+	if (copy_from_user(g_base, (void __user *)(unsigned long)crtc_lut->green, size)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	b_base = g_base + size;
+	if (copy_from_user(b_base, (void __user *)(unsigned long)crtc_lut->blue, size)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	crtc->funcs->gamma_set(crtc, r_base, g_base, b_base, crtc->gamma_size);
+
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+
+}
+
+int drm_mode_gamma_get_ioctl(struct drm_device *dev,
+			     void *data, struct drm_file *file_priv)
+{
+	struct drm_mode_crtc_lut *crtc_lut = data;
+	struct drm_mode_object *obj;
+	struct drm_crtc *crtc;
+	void *r_base, *g_base, *b_base;
+	int size;
+	int ret = 0;
+
+	mutex_lock(&dev->mode_config.mutex);
+	obj = drm_mode_object_find(dev, crtc_lut->crtc_id, DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		ret = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+
+	/* memcpy into gamma store */
+	if (crtc_lut->gamma_size != crtc->gamma_size) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	size = crtc_lut->gamma_size * (sizeof(uint16_t));
+	r_base = crtc->gamma_store;
+	if (copy_to_user((void __user *)(unsigned long)crtc_lut->red, r_base, size)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	g_base = r_base + size;
+	if (copy_to_user((void __user *)(unsigned long)crtc_lut->green, g_base, size)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	b_base = g_base + size;
+	if (copy_to_user((void __user *)(unsigned long)crtc_lut->blue, b_base, size)) {
+		ret = -EFAULT;
+		goto out;
+	}
+out:
+	mutex_unlock(&dev->mode_config.mutex);
+	return ret;
+}
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
new file mode 100644
index 00000000000..887ed33b069
--- /dev/null
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -0,0 +1,822 @@
+/*
+ * Copyright (c) 2006-2008 Intel Corporation
+ * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
+ *
+ * DRM core CRTC related functions
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ *
+ * Authors:
+ *      Keith Packard
+ *	Eric Anholt <eric@anholt.net>
+ *      Dave Airlie <airlied@linux.ie>
+ *      Jesse Barnes <jesse.barnes@intel.com>
+ */
+
+#include "drmP.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+
+/*
+ * Detailed mode info for a standard 640x480@60Hz monitor
+ */
+static struct drm_display_mode std_mode[] = {
+	{ DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 25200, 640, 656,
+		   752, 800, 0, 480, 490, 492, 525, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) },
+};
+
+/**
+ * drm_helper_probe_connector_modes - get complete set of display modes
+ * @dev: DRM device
+ * @maxX: max width for modes
+ * @maxY: max height for modes
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Based on @dev's mode_config layout, scan all the connectors and try to detect
+ * modes on them.  Modes will first be added to the connector's probed_modes
+ * list, then culled (based on validity and the @maxX, @maxY parameters) and
+ * put into the normal modes list.
+ *
+ * Intended to be used either at bootup time or when major configuration
+ * changes have occurred.
+ *
+ * FIXME: take into account monitor limits
+ */
+void drm_helper_probe_single_connector_modes(struct drm_connector *connector,
+					     uint32_t maxX, uint32_t maxY)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_display_mode *mode, *t;
+	struct drm_connector_helper_funcs *connector_funcs =
+		connector->helper_private;
+	int ret;
+
+	DRM_DEBUG("%s\n", drm_get_connector_name(connector));
+	/* set all modes to the unverified state */
+	list_for_each_entry_safe(mode, t, &connector->modes, head)
+		mode->status = MODE_UNVERIFIED;
+
+	connector->status = connector->funcs->detect(connector);
+
+	if (connector->status == connector_status_disconnected) {
+		DRM_DEBUG("%s is disconnected\n",
+			  drm_get_connector_name(connector));
+		/* TODO set EDID to NULL */
+		return;
+	}
+
+	ret = (*connector_funcs->get_modes)(connector);
+
+	if (ret) {
+		drm_mode_connector_list_update(connector);
+	}
+
+	if (maxX && maxY)
+		drm_mode_validate_size(dev, &connector->modes, maxX,
+				       maxY, 0);
+	list_for_each_entry_safe(mode, t, &connector->modes, head) {
+		if (mode->status == MODE_OK)
+			mode->status = connector_funcs->mode_valid(connector,
+								   mode);
+	}
+
+
+	drm_mode_prune_invalid(dev, &connector->modes, true);
+
+	if (list_empty(&connector->modes)) {
+		struct drm_display_mode *stdmode;
+
+		DRM_DEBUG("No valid modes on %s\n",
+			  drm_get_connector_name(connector));
+
+		/* Should we do this here ???
+		 * When no valid EDID modes are available we end up
+		 * here and bailed in the past, now we add a standard
+		 * 640x480@60Hz mode and carry on.
+		 */
+		stdmode = drm_mode_duplicate(dev, &std_mode[0]);
+		drm_mode_probed_add(connector, stdmode);
+		drm_mode_list_concat(&connector->probed_modes,
+				     &connector->modes);
+
+		DRM_DEBUG("Adding standard 640x480 @ 60Hz to %s\n",
+			  drm_get_connector_name(connector));
+	}
+
+	drm_mode_sort(&connector->modes);
+
+	DRM_DEBUG("Probed modes for %s\n", drm_get_connector_name(connector));
+	list_for_each_entry_safe(mode, t, &connector->modes, head) {
+		mode->vrefresh = drm_mode_vrefresh(mode);
+
+		drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
+		drm_mode_debug_printmodeline(mode);
+	}
+}
+EXPORT_SYMBOL(drm_helper_probe_single_connector_modes);
+
+void drm_helper_probe_connector_modes(struct drm_device *dev, uint32_t maxX,
+				      uint32_t maxY)
+{
+	struct drm_connector *connector;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		drm_helper_probe_single_connector_modes(connector, maxX, maxY);
+	}
+}
+EXPORT_SYMBOL(drm_helper_probe_connector_modes);
+
+
+/**
+ * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
+ * @crtc: CRTC to check
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Walk @crtc's DRM device's mode_config and see if it's in use.
+ *
+ * RETURNS:
+ * True if @crtc is part of the mode_config, false otherwise.
+ */
+bool drm_helper_crtc_in_use(struct drm_crtc *crtc)
+{
+	struct drm_encoder *encoder;
+	struct drm_device *dev = crtc->dev;
+	/* FIXME: Locking around list access? */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
+		if (encoder->crtc == crtc)
+			return true;
+	return false;
+}
+EXPORT_SYMBOL(drm_helper_crtc_in_use);
+
+/**
+ * drm_disable_unused_functions - disable unused objects
+ * @dev: DRM device
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * If an connector or CRTC isn't part of @dev's mode_config, it can be disabled
+ * by calling its dpms function, which should power it off.
+ */
+void drm_helper_disable_unused_functions(struct drm_device *dev)
+{
+	struct drm_encoder *encoder;
+	struct drm_encoder_helper_funcs *encoder_funcs;
+	struct drm_crtc *crtc;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		encoder_funcs = encoder->helper_private;
+		if (!encoder->crtc)
+			(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+	}
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+		crtc->enabled = drm_helper_crtc_in_use(crtc);
+		if (!crtc->enabled) {
+			crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+			crtc->fb = NULL;
+		}
+	}
+}
+EXPORT_SYMBOL(drm_helper_disable_unused_functions);
+
+static struct drm_display_mode *drm_has_preferred_mode(struct drm_connector *connector, int width, int height)
+{
+	struct drm_display_mode *mode;
+
+	list_for_each_entry(mode, &connector->modes, head) {
+		if (drm_mode_width(mode) > width ||
+		    drm_mode_height(mode) > height)
+			continue;
+		if (mode->type & DRM_MODE_TYPE_PREFERRED)
+			return mode;
+	}
+	return NULL;
+}
+
+static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
+{
+	bool enable;
+
+	if (strict) {
+		enable = connector->status == connector_status_connected;
+	} else {
+		enable = connector->status != connector_status_disconnected;
+	}
+	return enable;
+}
+
+static void drm_enable_connectors(struct drm_device *dev, bool *enabled)
+{
+	bool any_enabled = false;
+	struct drm_connector *connector;
+	int i = 0;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		enabled[i] = drm_connector_enabled(connector, true);
+		any_enabled |= enabled[i];
+		i++;
+	}
+
+	if (any_enabled)
+		return;
+
+	i = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		enabled[i] = drm_connector_enabled(connector, false);
+		i++;
+	}
+}
+
+static bool drm_target_preferred(struct drm_device *dev,
+				 struct drm_display_mode **modes,
+				 bool *enabled, int width, int height)
+{
+	struct drm_connector *connector;
+	int i = 0;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+
+		if (enabled[i] == false) {
+			i++;
+			continue;
+		}
+
+		modes[i] = drm_has_preferred_mode(connector, width, height);
+		if (!modes[i]) {
+			list_for_each_entry(modes[i], &connector->modes, head)
+				break;
+		}
+		i++;
+	}
+	return true;
+}
+
+static int drm_pick_crtcs(struct drm_device *dev,
+			  struct drm_crtc **best_crtcs,
+			  struct drm_display_mode **modes,
+			  int n, int width, int height)
+{
+	int c, o;
+	struct drm_connector *connector;
+	struct drm_connector_helper_funcs *connector_funcs;
+	struct drm_encoder *encoder;
+	struct drm_crtc *best_crtc;
+	int my_score, best_score, score;
+	struct drm_crtc **crtcs, *crtc;
+
+	if (n == dev->mode_config.num_connector)
+		return 0;
+	c = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		if (c == n)
+			break;
+		c++;
+	}
+
+	best_crtcs[n] = NULL;
+	best_crtc = NULL;
+	best_score = drm_pick_crtcs(dev, best_crtcs, modes, n+1, width, height);
+	if (modes[n] == NULL)
+		return best_score;
+
+	crtcs = kmalloc(dev->mode_config.num_connector *
+			sizeof(struct drm_crtc *), GFP_KERNEL);
+	if (!crtcs)
+		return best_score;
+
+	my_score = 1;
+	if (connector->status == connector_status_connected)
+		my_score++;
+	if (drm_has_preferred_mode(connector, width, height))
+		my_score++;
+
+	connector_funcs = connector->helper_private;
+	encoder = connector_funcs->best_encoder(connector);
+	if (!encoder)
+		goto out;
+
+	connector->encoder = encoder;
+
+	/* select a crtc for this connector and then attempt to configure
+	   remaining connectors */
+	c = 0;
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+
+		if ((connector->encoder->possible_crtcs & (1 << c)) == 0) {
+			c++;
+			continue;
+		}
+
+		for (o = 0; o < n; o++)
+			if (best_crtcs[o] == crtc)
+				break;
+
+		if (o < n) {
+			/* ignore cloning for now */
+			c++;
+			continue;
+		}
+
+		crtcs[n] = crtc;
+		memcpy(crtcs, best_crtcs, n * sizeof(struct drm_crtc *));
+		score = my_score + drm_pick_crtcs(dev, crtcs, modes, n + 1,
+						  width, height);
+		if (score > best_score) {
+			best_crtc = crtc;
+			best_score = score;
+			memcpy(best_crtcs, crtcs,
+			       dev->mode_config.num_connector *
+			       sizeof(struct drm_crtc *));
+		}
+		c++;
+	}
+out:
+	kfree(crtcs);
+	return best_score;
+}
+
+static void drm_setup_crtcs(struct drm_device *dev)
+{
+	struct drm_crtc **crtcs;
+	struct drm_display_mode **modes;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+	bool *enabled;
+	int width, height;
+	int i, ret;
+
+	width = dev->mode_config.max_width;
+	height = dev->mode_config.max_height;
+
+	/* clean out all the encoder/crtc combos */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		encoder->crtc = NULL;
+	}
+
+	crtcs = kcalloc(dev->mode_config.num_connector,
+			sizeof(struct drm_crtc *), GFP_KERNEL);
+	modes = kcalloc(dev->mode_config.num_connector,
+			sizeof(struct drm_display_mode *), GFP_KERNEL);
+	enabled = kcalloc(dev->mode_config.num_connector,
+			  sizeof(bool), GFP_KERNEL);
+
+	drm_enable_connectors(dev, enabled);
+
+	ret = drm_target_preferred(dev, modes, enabled, width, height);
+	if (!ret)
+		DRM_ERROR("Unable to find initial modes\n");
+
+	drm_pick_crtcs(dev, crtcs, modes, 0, width, height);
+
+	i = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		struct drm_display_mode *mode = modes[i];
+		struct drm_crtc *crtc = crtcs[i];
+
+		if (connector->encoder == NULL) {
+			i++;
+			continue;
+		}
+
+		if (mode && crtc) {
+			crtc->desired_mode = mode;
+			connector->encoder->crtc = crtc;
+		} else
+			connector->encoder->crtc = NULL;
+		i++;
+	}
+
+	kfree(crtcs);
+	kfree(modes);
+	kfree(enabled);
+}
+/**
+ * drm_crtc_set_mode - set a mode
+ * @crtc: CRTC to program
+ * @mode: mode to use
+ * @x: width of mode
+ * @y: height of mode
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Try to set @mode on @crtc.  Give @crtc and its associated connectors a chance
+ * to fixup or reject the mode prior to trying to set it.
+ *
+ * RETURNS:
+ * True if the mode was set successfully, or false otherwise.
+ */
+bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
+			      struct drm_display_mode *mode,
+			      int x, int y)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_display_mode *adjusted_mode, saved_mode;
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	struct drm_encoder_helper_funcs *encoder_funcs;
+	int saved_x, saved_y;
+	struct drm_encoder *encoder;
+	bool ret = true;
+
+	adjusted_mode = drm_mode_duplicate(dev, mode);
+
+	crtc->enabled = drm_helper_crtc_in_use(crtc);
+
+	if (!crtc->enabled)
+		return true;
+
+	saved_mode = crtc->mode;
+	saved_x = crtc->x;
+	saved_y = crtc->y;
+
+	/* Update crtc values up front so the driver can rely on them for mode
+	 * setting.
+	 */
+	crtc->mode = *mode;
+	crtc->x = x;
+	crtc->y = y;
+
+	if (drm_mode_equal(&saved_mode, &crtc->mode)) {
+		if (saved_x != crtc->x || saved_y != crtc->y) {
+			crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y);
+			goto done;
+		}
+	}
+
+	/* Pass our mode to the connectors and the CRTC to give them a chance to
+	 * adjust it according to limitations or connector properties, and also
+	 * a chance to reject the mode entirely.
+	 */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+
+		if (encoder->crtc != crtc)
+			continue;
+		encoder_funcs = encoder->helper_private;
+		if (!(ret = encoder_funcs->mode_fixup(encoder, mode,
+						      adjusted_mode))) {
+			goto done;
+		}
+	}
+
+	if (!(ret = crtc_funcs->mode_fixup(crtc, mode, adjusted_mode))) {
+		goto done;
+	}
+
+	/* Prepare the encoders and CRTCs before setting the mode. */
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+
+		if (encoder->crtc != crtc)
+			continue;
+		encoder_funcs = encoder->helper_private;
+		/* Disable the encoders as the first thing we do. */
+		encoder_funcs->prepare(encoder);
+	}
+
+	crtc_funcs->prepare(crtc);
+
+	/* Set up the DPLL and any encoders state that needs to adjust or depend
+	 * on the DPLL.
+	 */
+	crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y);
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+
+		if (encoder->crtc != crtc)
+			continue;
+
+		DRM_INFO("%s: set mode %s %x\n", drm_get_encoder_name(encoder),
+			 mode->name, mode->base.id);
+		encoder_funcs = encoder->helper_private;
+		encoder_funcs->mode_set(encoder, mode, adjusted_mode);
+	}
+
+	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
+	crtc_funcs->commit(crtc);
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+
+		if (encoder->crtc != crtc)
+			continue;
+
+		encoder_funcs = encoder->helper_private;
+		encoder_funcs->commit(encoder);
+
+	}
+
+	/* XXX free adjustedmode */
+	drm_mode_destroy(dev, adjusted_mode);
+	/* FIXME: add subpixel order */
+done:
+	if (!ret) {
+		crtc->mode = saved_mode;
+		crtc->x = saved_x;
+		crtc->y = saved_y;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(drm_crtc_helper_set_mode);
+
+
+/**
+ * drm_crtc_helper_set_config - set a new config from userspace
+ * @crtc: CRTC to setup
+ * @crtc_info: user provided configuration
+ * @new_mode: new mode to set
+ * @connector_set: set of connectors for the new config
+ * @fb: new framebuffer
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Setup a new configuration, provided by the user in @crtc_info, and enable
+ * it.
+ *
+ * RETURNS:
+ * Zero. (FIXME)
+ */
+int drm_crtc_helper_set_config(struct drm_mode_set *set)
+{
+	struct drm_device *dev;
+	struct drm_crtc **save_crtcs, *new_crtc;
+	struct drm_encoder **save_encoders, *new_encoder;
+	bool save_enabled;
+	bool changed = false;
+	bool flip_or_move = false;
+	struct drm_connector *connector;
+	int count = 0, ro, fail = 0;
+	struct drm_crtc_helper_funcs *crtc_funcs;
+	int ret = 0;
+
+	DRM_DEBUG("\n");
+
+	if (!set)
+		return -EINVAL;
+
+	if (!set->crtc)
+		return -EINVAL;
+
+	if (!set->crtc->helper_private)
+		return -EINVAL;
+
+	crtc_funcs = set->crtc->helper_private;
+
+	DRM_DEBUG("crtc: %p %d fb: %p connectors: %p num_connectors: %d (x, y) (%i, %i)\n",
+		  set->crtc, set->crtc->base.id, set->fb, set->connectors,
+		  (int)set->num_connectors, set->x, set->y);
+
+	dev = set->crtc->dev;
+
+	/* save previous config */
+	save_enabled = set->crtc->enabled;
+
+	/* this is meant to be num_connector not num_crtc */
+	save_crtcs = kzalloc(dev->mode_config.num_connector *
+			     sizeof(struct drm_crtc *), GFP_KERNEL);
+	if (!save_crtcs)
+		return -ENOMEM;
+
+	save_encoders = kzalloc(dev->mode_config.num_connector *
+				sizeof(struct drm_encoders *), GFP_KERNEL);
+	if (!save_encoders) {
+		kfree(save_crtcs);
+		return -ENOMEM;
+	}
+
+	/* We should be able to check here if the fb has the same properties
+	 * and then just flip_or_move it */
+	if (set->crtc->fb != set->fb) {
+		/* if we have no fb then its a change not a flip */
+		if (set->crtc->fb == NULL)
+			changed = true;
+		else
+			flip_or_move = true;
+	}
+
+	if (set->x != set->crtc->x || set->y != set->crtc->y)
+		flip_or_move = true;
+
+	if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
+		DRM_DEBUG("modes are different\n");
+		drm_mode_debug_printmodeline(&set->crtc->mode);
+		drm_mode_debug_printmodeline(set->mode);
+		changed = true;
+	}
+
+	/* a) traverse passed in connector list and get encoders for them */
+	count = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		struct drm_connector_helper_funcs *connector_funcs =
+			connector->helper_private;
+		save_encoders[count++] = connector->encoder;
+		new_encoder = connector->encoder;
+		for (ro = 0; ro < set->num_connectors; ro++) {
+			if (set->connectors[ro] == connector) {
+				new_encoder = connector_funcs->best_encoder(connector);
+				/* if we can't get an encoder for a connector
+				   we are setting now - then fail */
+				if (new_encoder == NULL)
+					/* don't break so fail path works correct */
+					fail = 1;
+				break;
+			}
+		}
+
+		if (new_encoder != connector->encoder) {
+			changed = true;
+			connector->encoder = new_encoder;
+		}
+	}
+
+	if (fail) {
+		ret = -EINVAL;
+		goto fail_no_encoder;
+	}
+
+	count = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		if (!connector->encoder)
+			continue;
+
+		save_crtcs[count++] = connector->encoder->crtc;
+
+		if (connector->encoder->crtc == set->crtc)
+			new_crtc = NULL;
+		else
+			new_crtc = connector->encoder->crtc;
+
+		for (ro = 0; ro < set->num_connectors; ro++) {
+			if (set->connectors[ro] == connector)
+				new_crtc = set->crtc;
+		}
+		if (new_crtc != connector->encoder->crtc) {
+			changed = true;
+			connector->encoder->crtc = new_crtc;
+		}
+	}
+
+	/* mode_set_base is not a required function */
+	if (flip_or_move && !crtc_funcs->mode_set_base)
+		changed = true;
+
+	if (changed) {
+		set->crtc->fb = set->fb;
+		set->crtc->enabled = (set->mode != NULL);
+		if (set->mode != NULL) {
+			DRM_DEBUG("attempting to set mode from userspace\n");
+			drm_mode_debug_printmodeline(set->mode);
+			if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
+						      set->x, set->y)) {
+				ret = -EINVAL;
+				goto fail_set_mode;
+			}
+			/* TODO are these needed? */
+			set->crtc->desired_x = set->x;
+			set->crtc->desired_y = set->y;
+			set->crtc->desired_mode = set->mode;
+		}
+		drm_helper_disable_unused_functions(dev);
+	} else if (flip_or_move) {
+		if (set->crtc->fb != set->fb)
+			set->crtc->fb = set->fb;
+		crtc_funcs->mode_set_base(set->crtc, set->x, set->y);
+	}
+
+	kfree(save_encoders);
+	kfree(save_crtcs);
+	return 0;
+
+fail_set_mode:
+	set->crtc->enabled = save_enabled;
+	count = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		connector->encoder->crtc = save_crtcs[count++];
+fail_no_encoder:
+	kfree(save_crtcs);
+	count = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		connector->encoder = save_encoders[count++];
+	}
+	kfree(save_encoders);
+	return ret;
+}
+EXPORT_SYMBOL(drm_crtc_helper_set_config);
+
+bool drm_helper_plugged_event(struct drm_device *dev)
+{
+	DRM_DEBUG("\n");
+
+	drm_helper_probe_connector_modes(dev, dev->mode_config.max_width,
+					 dev->mode_config.max_height);
+
+	drm_setup_crtcs(dev);
+
+	/* alert the driver fb layer */
+	dev->mode_config.funcs->fb_changed(dev);
+
+	/* FIXME: send hotplug event */
+	return true;
+}
+/**
+ * drm_initial_config - setup a sane initial connector configuration
+ * @dev: DRM device
+ * @can_grow: this configuration is growable
+ *
+ * LOCKING:
+ * Called at init time, must take mode config lock.
+ *
+ * Scan the CRTCs and connectors and try to put together an initial setup.
+ * At the moment, this is a cloned configuration across all heads with
+ * a new framebuffer object as the backing store.
+ *
+ * RETURNS:
+ * Zero if everything went ok, nonzero otherwise.
+ */
+bool drm_helper_initial_config(struct drm_device *dev, bool can_grow)
+{
+	int ret = false;
+
+	drm_helper_plugged_event(dev);
+	return ret;
+}
+EXPORT_SYMBOL(drm_helper_initial_config);
+
+/**
+ * drm_hotplug_stage_two
+ * @dev DRM device
+ * @connector hotpluged connector
+ *
+ * LOCKING.
+ * Caller must hold mode config lock, function might grab struct lock.
+ *
+ * Stage two of a hotplug.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int drm_helper_hotplug_stage_two(struct drm_device *dev)
+{
+	dev->mode_config.hotplug_counter++;
+
+	drm_helper_plugged_event(dev);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_helper_hotplug_stage_two);
+
+int drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
+				   struct drm_mode_fb_cmd *mode_cmd)
+{
+	fb->width = mode_cmd->width;
+	fb->height = mode_cmd->height;
+	fb->pitch = mode_cmd->pitch;
+	fb->bits_per_pixel = mode_cmd->bpp;
+	fb->depth = mode_cmd->depth;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct);
+
+int drm_helper_resume_force_mode(struct drm_device *dev)
+{
+	struct drm_crtc *crtc;
+	int ret;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+
+		if (!crtc->enabled)
+			continue;
+
+		ret = drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x,
+					       crtc->y);
+
+		if (ret == false)
+			DRM_ERROR("failed to set mode on crtc %p\n", crtc);
+	}
+	return 0;
+}
+EXPORT_SYMBOL(drm_helper_resume_force_mode);
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 98a781375f6..0b9f3164a3b 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -126,6 +126,26 @@ static struct drm_ioctl_desc drm_ioctls[] = {
 	DRM_IOCTL_DEF(DRM_IOCTL_GEM_CLOSE, drm_gem_close_ioctl, 0),
 	DRM_IOCTL_DEF(DRM_IOCTL_GEM_FLINK, drm_gem_flink_ioctl, DRM_AUTH),
 	DRM_IOCTL_DEF(DRM_IOCTL_GEM_OPEN, drm_gem_open_ioctl, DRM_AUTH),
+
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETRESOURCES, drm_mode_getresources, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETCRTC, drm_mode_getcrtc, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETCONNECTOR, drm_mode_getconnector, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETCRTC, drm_mode_setcrtc, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_CURSOR, drm_mode_cursor_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_ADDFB, drm_mode_addfb, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_RMFB, drm_mode_rmfb, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETFB, drm_mode_getfb, DRM_MASTER|DRM_CONTROL_ALLOW),
+
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETPROPERTY, drm_mode_connector_property_set_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPBLOB, drm_mode_getblob_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_ATTACHMODE, drm_mode_attachmode_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_DETACHMODE, drm_mode_detachmode_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPERTY, drm_mode_getproperty_ioctl, DRM_MASTER | DRM_CONTROL_ALLOW),
+
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_REPLACEFB, drm_mode_replacefb, DRM_MASTER|DRM_ROOT_ONLY|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETENCODER, drm_mode_getencoder, DRM_MASTER|DRM_CONTROL_ALLOW),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETGAMMA, drm_mode_gamma_get_ioctl, DRM_MASTER),
+	DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETGAMMA, drm_mode_gamma_set_ioctl, DRM_MASTER),
 };
 
 #define DRM_CORE_IOCTL_COUNT	ARRAY_SIZE( drm_ioctls )
@@ -150,7 +170,7 @@ int drm_lastclose(struct drm_device * dev)
 		dev->driver->lastclose(dev);
 	DRM_DEBUG("driver lastclose completed\n");
 
-	if (dev->irq_enabled)
+	if (dev->irq_enabled && !drm_core_check_feature(dev, DRIVER_MODESET))
 		drm_irq_uninstall(dev);
 
 	mutex_lock(&dev->struct_mutex);
@@ -160,7 +180,8 @@ int drm_lastclose(struct drm_device * dev)
 	del_timer(&dev->timer);
 
 	/* Clear AGP information */
-	if (drm_core_has_AGP(dev) && dev->agp) {
+	if (drm_core_has_AGP(dev) && dev->agp &&
+	    !drm_core_check_feature(dev, DRIVER_MODESET)) {
 		struct drm_agp_mem *entry, *tempe;
 
 		/* Remove AGP resources, but leave dev->agp
@@ -179,7 +200,8 @@ int drm_lastclose(struct drm_device * dev)
 		dev->agp->acquired = 0;
 		dev->agp->enabled = 0;
 	}
-	if (drm_core_check_feature(dev, DRIVER_SG) && dev->sg) {
+	if (drm_core_check_feature(dev, DRIVER_SG) && dev->sg &&
+	    !drm_core_check_feature(dev, DRIVER_MODESET)) {
 		drm_sg_cleanup(dev->sg);
 		dev->sg = NULL;
 	}
@@ -206,7 +228,8 @@ int drm_lastclose(struct drm_device * dev)
 	}
 	dev->queue_count = 0;
 
-	if (drm_core_check_feature(dev, DRIVER_HAVE_DMA))
+	if (drm_core_check_feature(dev, DRIVER_HAVE_DMA) &&
+	    !drm_core_check_feature(dev, DRIVER_MODESET))
 		drm_dma_takedown(dev);
 
 	dev->dev_mapping = NULL;
@@ -307,6 +330,9 @@ static void drm_cleanup(struct drm_device * dev)
 	drm_ht_remove(&dev->map_hash);
 	drm_ctxbitmap_cleanup(dev);
 
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		drm_put_minor(&dev->control);
+
 	if (driver->driver_features & DRIVER_GEM)
 		drm_gem_destroy(dev);
 
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
new file mode 100644
index 00000000000..681753e57dc
--- /dev/null
+++ b/drivers/gpu/drm/drm_edid.c
@@ -0,0 +1,732 @@
+/*
+ * Copyright (c) 2006 Luc Verhaegen (quirks list)
+ * Copyright (c) 2007-2008 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * DDC probing routines (drm_ddc_read & drm_do_probe_ddc_edid) originally from
+ * FB layer.
+ *   Copyright (C) 2006 Dennis Munsie <dmunsie@cecropia.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include "drmP.h"
+#include "drm_edid.h"
+
+/*
+ * TODO:
+ *   - support EDID 1.4 (incl. CE blocks)
+ */
+
+/*
+ * EDID blocks out in the wild have a variety of bugs, try to collect
+ * them here (note that userspace may work around broken monitors first,
+ * but fixes should make their way here so that the kernel "just works"
+ * on as many displays as possible).
+ */
+
+/* First detailed mode wrong, use largest 60Hz mode */
+#define EDID_QUIRK_PREFER_LARGE_60		(1 << 0)
+/* Reported 135MHz pixel clock is too high, needs adjustment */
+#define EDID_QUIRK_135_CLOCK_TOO_HIGH		(1 << 1)
+/* Prefer the largest mode at 75 Hz */
+#define EDID_QUIRK_PREFER_LARGE_75		(1 << 2)
+/* Detail timing is in cm not mm */
+#define EDID_QUIRK_DETAILED_IN_CM		(1 << 3)
+/* Detailed timing descriptors have bogus size values, so just take the
+ * maximum size and use that.
+ */
+#define EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE	(1 << 4)
+/* Monitor forgot to set the first detailed is preferred bit. */
+#define EDID_QUIRK_FIRST_DETAILED_PREFERRED	(1 << 5)
+/* use +hsync +vsync for detailed mode */
+#define EDID_QUIRK_DETAILED_SYNC_PP		(1 << 6)
+
+static struct edid_quirk {
+	char *vendor;
+	int product_id;
+	u32 quirks;
+} edid_quirk_list[] = {
+	/* Acer AL1706 */
+	{ "ACR", 44358, EDID_QUIRK_PREFER_LARGE_60 },
+	/* Acer F51 */
+	{ "API", 0x7602, EDID_QUIRK_PREFER_LARGE_60 },
+	/* Unknown Acer */
+	{ "ACR", 2423, EDID_QUIRK_FIRST_DETAILED_PREFERRED },
+
+	/* Belinea 10 15 55 */
+	{ "MAX", 1516, EDID_QUIRK_PREFER_LARGE_60 },
+	{ "MAX", 0x77e, EDID_QUIRK_PREFER_LARGE_60 },
+
+	/* Envision Peripherals, Inc. EN-7100e */
+	{ "EPI", 59264, EDID_QUIRK_135_CLOCK_TOO_HIGH },
+
+	/* Funai Electronics PM36B */
+	{ "FCM", 13600, EDID_QUIRK_PREFER_LARGE_75 |
+	  EDID_QUIRK_DETAILED_IN_CM },
+
+	/* LG Philips LCD LP154W01-A5 */
+	{ "LPL", 0, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE },
+	{ "LPL", 0x2a00, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE },
+
+	/* Philips 107p5 CRT */
+	{ "PHL", 57364, EDID_QUIRK_FIRST_DETAILED_PREFERRED },
+
+	/* Proview AY765C */
+	{ "PTS", 765, EDID_QUIRK_FIRST_DETAILED_PREFERRED },
+
+	/* Samsung SyncMaster 205BW.  Note: irony */
+	{ "SAM", 541, EDID_QUIRK_DETAILED_SYNC_PP },
+	/* Samsung SyncMaster 22[5-6]BW */
+	{ "SAM", 596, EDID_QUIRK_PREFER_LARGE_60 },
+	{ "SAM", 638, EDID_QUIRK_PREFER_LARGE_60 },
+};
+
+
+/* Valid EDID header has these bytes */
+static u8 edid_header[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 };
+
+/**
+ * edid_is_valid - sanity check EDID data
+ * @edid: EDID data
+ *
+ * Sanity check the EDID block by looking at the header, the version number
+ * and the checksum.  Return 0 if the EDID doesn't check out, or 1 if it's
+ * valid.
+ */
+static bool edid_is_valid(struct edid *edid)
+{
+	int i;
+	u8 csum = 0;
+	u8 *raw_edid = (u8 *)edid;
+
+	if (memcmp(edid->header, edid_header, sizeof(edid_header)))
+		goto bad;
+	if (edid->version != 1) {
+		DRM_ERROR("EDID has major version %d, instead of 1\n", edid->version);
+		goto bad;
+	}
+	if (edid->revision <= 0 || edid->revision > 3) {
+		DRM_ERROR("EDID has minor version %d, which is not between 0-3\n", edid->revision);
+		goto bad;
+	}
+
+	for (i = 0; i < EDID_LENGTH; i++)
+		csum += raw_edid[i];
+	if (csum) {
+		DRM_ERROR("EDID checksum is invalid, remainder is %d\n", csum);
+		goto bad;
+	}
+
+	return 1;
+
+bad:
+	if (raw_edid) {
+		DRM_ERROR("Raw EDID:\n");
+		print_hex_dump_bytes(KERN_ERR, DUMP_PREFIX_NONE, raw_edid, EDID_LENGTH);
+		printk("\n");
+	}
+	return 0;
+}
+
+/**
+ * edid_vendor - match a string against EDID's obfuscated vendor field
+ * @edid: EDID to match
+ * @vendor: vendor string
+ *
+ * Returns true if @vendor is in @edid, false otherwise
+ */
+static bool edid_vendor(struct edid *edid, char *vendor)
+{
+	char edid_vendor[3];
+
+	edid_vendor[0] = ((edid->mfg_id[0] & 0x7c) >> 2) + '@';
+	edid_vendor[1] = (((edid->mfg_id[0] & 0x3) << 3) |
+			  ((edid->mfg_id[1] & 0xe0) >> 5)) + '@';
+	edid_vendor[2] = (edid->mfg_id[2] & 0x1f) + '@';
+
+	return !strncmp(edid_vendor, vendor, 3);
+}
+
+/**
+ * edid_get_quirks - return quirk flags for a given EDID
+ * @edid: EDID to process
+ *
+ * This tells subsequent routines what fixes they need to apply.
+ */
+static u32 edid_get_quirks(struct edid *edid)
+{
+	struct edid_quirk *quirk;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(edid_quirk_list); i++) {
+		quirk = &edid_quirk_list[i];
+
+		if (edid_vendor(edid, quirk->vendor) &&
+		    (EDID_PRODUCT_ID(edid) == quirk->product_id))
+			return quirk->quirks;
+	}
+
+	return 0;
+}
+
+#define MODE_SIZE(m) ((m)->hdisplay * (m)->vdisplay)
+#define MODE_REFRESH_DIFF(m,r) (abs((m)->vrefresh - target_refresh))
+
+
+/**
+ * edid_fixup_preferred - set preferred modes based on quirk list
+ * @connector: has mode list to fix up
+ * @quirks: quirks list
+ *
+ * Walk the mode list for @connector, clearing the preferred status
+ * on existing modes and setting it anew for the right mode ala @quirks.
+ */
+static void edid_fixup_preferred(struct drm_connector *connector,
+				 u32 quirks)
+{
+	struct drm_display_mode *t, *cur_mode, *preferred_mode;
+	int target_refresh;
+
+	if (list_empty(&connector->probed_modes))
+		return;
+
+	if (quirks & EDID_QUIRK_PREFER_LARGE_60)
+		target_refresh = 60;
+	if (quirks & EDID_QUIRK_PREFER_LARGE_75)
+		target_refresh = 75;
+
+	preferred_mode = list_first_entry(&connector->probed_modes,
+					  struct drm_display_mode, head);
+
+	list_for_each_entry_safe(cur_mode, t, &connector->probed_modes, head) {
+		cur_mode->type &= ~DRM_MODE_TYPE_PREFERRED;
+
+		if (cur_mode == preferred_mode)
+			continue;
+
+		/* Largest mode is preferred */
+		if (MODE_SIZE(cur_mode) > MODE_SIZE(preferred_mode))
+			preferred_mode = cur_mode;
+
+		/* At a given size, try to get closest to target refresh */
+		if ((MODE_SIZE(cur_mode) == MODE_SIZE(preferred_mode)) &&
+		    MODE_REFRESH_DIFF(cur_mode, target_refresh) <
+		    MODE_REFRESH_DIFF(preferred_mode, target_refresh)) {
+			preferred_mode = cur_mode;
+		}
+	}
+
+	preferred_mode->type |= DRM_MODE_TYPE_PREFERRED;
+}
+
+/**
+ * drm_mode_std - convert standard mode info (width, height, refresh) into mode
+ * @t: standard timing params
+ *
+ * Take the standard timing params (in this case width, aspect, and refresh)
+ * and convert them into a real mode using CVT.
+ *
+ * Punts for now, but should eventually use the FB layer's CVT based mode
+ * generation code.
+ */
+struct drm_display_mode *drm_mode_std(struct drm_device *dev,
+				      struct std_timing *t)
+{
+	struct drm_display_mode *mode;
+	int hsize = t->hsize * 8 + 248, vsize;
+
+	mode = drm_mode_create(dev);
+	if (!mode)
+		return NULL;
+
+	if (t->aspect_ratio == 0)
+		vsize = (hsize * 10) / 16;
+	else if (t->aspect_ratio == 1)
+		vsize = (hsize * 3) / 4;
+	else if (t->aspect_ratio == 2)
+		vsize = (hsize * 4) / 5;
+	else
+		vsize = (hsize * 9) / 16;
+
+	drm_mode_set_name(mode);
+
+	return mode;
+}
+
+/**
+ * drm_mode_detailed - create a new mode from an EDID detailed timing section
+ * @dev: DRM device (needed to create new mode)
+ * @edid: EDID block
+ * @timing: EDID detailed timing info
+ * @quirks: quirks to apply
+ *
+ * An EDID detailed timing block contains enough info for us to create and
+ * return a new struct drm_display_mode.
+ */
+static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
+						  struct edid *edid,
+						  struct detailed_timing *timing,
+						  u32 quirks)
+{
+	struct drm_display_mode *mode;
+	struct detailed_pixel_timing *pt = &timing->data.pixel_data;
+
+	if (pt->stereo) {
+		printk(KERN_WARNING "stereo mode not supported\n");
+		return NULL;
+	}
+	if (!pt->separate_sync) {
+		printk(KERN_WARNING "integrated sync not supported\n");
+		return NULL;
+	}
+
+	mode = drm_mode_create(dev);
+	if (!mode)
+		return NULL;
+
+	mode->type = DRM_MODE_TYPE_DRIVER;
+
+	if (quirks & EDID_QUIRK_135_CLOCK_TOO_HIGH)
+		timing->pixel_clock = 1088;
+
+	mode->clock = timing->pixel_clock * 10;
+
+	mode->hdisplay = (pt->hactive_hi << 8) | pt->hactive_lo;
+	mode->hsync_start = mode->hdisplay + ((pt->hsync_offset_hi << 8) |
+					      pt->hsync_offset_lo);
+	mode->hsync_end = mode->hsync_start +
+		((pt->hsync_pulse_width_hi << 8) |
+		 pt->hsync_pulse_width_lo);
+	mode->htotal = mode->hdisplay + ((pt->hblank_hi << 8) | pt->hblank_lo);
+
+	mode->vdisplay = (pt->vactive_hi << 8) | pt->vactive_lo;
+	mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 8) |
+					      pt->vsync_offset_lo);
+	mode->vsync_end = mode->vsync_start +
+		((pt->vsync_pulse_width_hi << 8) |
+		 pt->vsync_pulse_width_lo);
+	mode->vtotal = mode->vdisplay + ((pt->vblank_hi << 8) | pt->vblank_lo);
+
+	drm_mode_set_name(mode);
+
+	if (pt->interlaced)
+		mode->flags |= DRM_MODE_FLAG_INTERLACE;
+
+	if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
+		pt->hsync_positive = 1;
+		pt->vsync_positive = 1;
+	}
+
+	mode->flags |= pt->hsync_positive ? DRM_MODE_FLAG_PHSYNC : DRM_MODE_FLAG_NHSYNC;
+	mode->flags |= pt->vsync_positive ? DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
+
+	mode->width_mm = pt->width_mm_lo | (pt->width_mm_hi << 8);
+	mode->height_mm = pt->height_mm_lo | (pt->height_mm_hi << 8);
+
+	if (quirks & EDID_QUIRK_DETAILED_IN_CM) {
+		mode->width_mm *= 10;
+		mode->height_mm *= 10;
+	}
+
+	if (quirks & EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE) {
+		mode->width_mm = edid->width_cm * 10;
+		mode->height_mm = edid->height_cm * 10;
+	}
+
+	return mode;
+}
+
+/*
+ * Detailed mode info for the EDID "established modes" data to use.
+ */
+static struct drm_display_mode edid_est_modes[] = {
+	{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840,
+		   968, 1056, 0, 600, 601, 605, 628, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@60Hz */
+	{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 36000, 800, 824,
+		   896, 1024, 0, 600, 601, 603,  625, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@56Hz */
+	{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 656,
+		   720, 840, 0, 480, 481, 484, 500, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@75Hz */
+	{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664,
+		   704,  832, 0, 480, 489, 491, 520, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@72Hz */
+	{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 30240, 640, 704,
+		   768,  864, 0, 480, 483, 486, 525, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@67Hz */
+	{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25200, 640, 656,
+		   752, 800, 0, 480, 490, 492, 525, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@60Hz */
+	{ DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 738,
+		   846, 900, 0, 400, 421, 423,  449, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 720x400@88Hz */
+	{ DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 28320, 720, 738,
+		   846,  900, 0, 400, 412, 414, 449, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 720x400@70Hz */
+	{ DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296,
+		   1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1280x1024@75Hz */
+	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78800, 1024, 1040,
+		   1136, 1312, 0,  768, 769, 772, 800, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1024x768@75Hz */
+	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048,
+		   1184, 1328, 0,  768, 771, 777, 806, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 1024x768@70Hz */
+	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
+		   1184, 1344, 0,  768, 771, 777, 806, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 1024x768@60Hz */
+	{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER,44900, 1024, 1032,
+		   1208, 1264, 0, 768, 768, 776, 817, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_INTERLACE) }, /* 1024x768@43Hz */
+	{ DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 57284, 832, 864,
+		   928, 1152, 0, 624, 625, 628, 667, 0,
+		   DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 832x624@75Hz */
+	{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 49500, 800, 816,
+		   896, 1056, 0, 600, 601, 604,  625, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@75Hz */
+	{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 50000, 800, 856,
+		   976, 1040, 0, 600, 637, 643, 666, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@72Hz */
+	{ DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216,
+		   1344, 1600, 0,  864, 865, 868, 900, 0,
+		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1152x864@75Hz */
+};
+
+#define EDID_EST_TIMINGS 16
+#define EDID_STD_TIMINGS 8
+#define EDID_DETAILED_TIMINGS 4
+
+/**
+ * add_established_modes - get est. modes from EDID and add them
+ * @edid: EDID block to scan
+ *
+ * Each EDID block contains a bitmap of the supported "established modes" list
+ * (defined above).  Tease them out and add them to the global modes list.
+ */
+static int add_established_modes(struct drm_connector *connector, struct edid *edid)
+{
+	struct drm_device *dev = connector->dev;
+	unsigned long est_bits = edid->established_timings.t1 |
+		(edid->established_timings.t2 << 8) |
+		((edid->established_timings.mfg_rsvd & 0x80) << 9);
+	int i, modes = 0;
+
+	for (i = 0; i <= EDID_EST_TIMINGS; i++)
+		if (est_bits & (1<<i)) {
+			struct drm_display_mode *newmode;
+			newmode = drm_mode_duplicate(dev, &edid_est_modes[i]);
+			if (newmode) {
+				drm_mode_probed_add(connector, newmode);
+				modes++;
+			}
+		}
+
+	return modes;
+}
+
+/**
+ * add_standard_modes - get std. modes from EDID and add them
+ * @edid: EDID block to scan
+ *
+ * Standard modes can be calculated using the CVT standard.  Grab them from
+ * @edid, calculate them, and add them to the list.
+ */
+static int add_standard_modes(struct drm_connector *connector, struct edid *edid)
+{
+	struct drm_device *dev = connector->dev;
+	int i, modes = 0;
+
+	for (i = 0; i < EDID_STD_TIMINGS; i++) {
+		struct std_timing *t = &edid->standard_timings[i];
+		struct drm_display_mode *newmode;
+
+		/* If std timings bytes are 1, 1 it's empty */
+		if (t->hsize == 1 && (t->aspect_ratio | t->vfreq) == 1)
+			continue;
+
+		newmode = drm_mode_std(dev, &edid->standard_timings[i]);
+		if (newmode) {
+			drm_mode_probed_add(connector, newmode);
+			modes++;
+		}
+	}
+
+	return modes;
+}
+
+/**
+ * add_detailed_modes - get detailed mode info from EDID data
+ * @connector: attached connector
+ * @edid: EDID block to scan
+ * @quirks: quirks to apply
+ *
+ * Some of the detailed timing sections may contain mode information.  Grab
+ * it and add it to the list.
+ */
+static int add_detailed_info(struct drm_connector *connector,
+			     struct edid *edid, u32 quirks)
+{
+	struct drm_device *dev = connector->dev;
+	int i, j, modes = 0;
+
+	for (i = 0; i < EDID_DETAILED_TIMINGS; i++) {
+		struct detailed_timing *timing = &edid->detailed_timings[i];
+		struct detailed_non_pixel *data = &timing->data.other_data;
+		struct drm_display_mode *newmode;
+
+		/* EDID up to and including 1.2 may put monitor info here */
+		if (edid->version == 1 && edid->revision < 3)
+			continue;
+
+		/* Detailed mode timing */
+		if (timing->pixel_clock) {
+			newmode = drm_mode_detailed(dev, edid, timing, quirks);
+			if (!newmode)
+				continue;
+
+			/* First detailed mode is preferred */
+			if (i == 0 && edid->preferred_timing)
+				newmode->type |= DRM_MODE_TYPE_PREFERRED;
+			drm_mode_probed_add(connector, newmode);
+
+			modes++;
+			continue;
+		}
+
+		/* Other timing or info */
+		switch (data->type) {
+		case EDID_DETAIL_MONITOR_SERIAL:
+			break;
+		case EDID_DETAIL_MONITOR_STRING:
+			break;
+		case EDID_DETAIL_MONITOR_RANGE:
+			/* Get monitor range data */
+			break;
+		case EDID_DETAIL_MONITOR_NAME:
+			break;
+		case EDID_DETAIL_MONITOR_CPDATA:
+			break;
+		case EDID_DETAIL_STD_MODES:
+			/* Five modes per detailed section */
+			for (j = 0; j < 5; i++) {
+				struct std_timing *std;
+				struct drm_display_mode *newmode;
+
+				std = &data->data.timings[j];
+				newmode = drm_mode_std(dev, std);
+				if (newmode) {
+					drm_mode_probed_add(connector, newmode);
+					modes++;
+				}
+			}
+			break;
+		default:
+			break;
+		}
+	}
+
+	return modes;
+}
+
+#define DDC_ADDR 0x50
+
+unsigned char *drm_do_probe_ddc_edid(struct i2c_adapter *adapter)
+{
+	unsigned char start = 0x0;
+	unsigned char *buf = kmalloc(EDID_LENGTH, GFP_KERNEL);
+	struct i2c_msg msgs[] = {
+		{
+			.addr	= DDC_ADDR,
+			.flags	= 0,
+			.len	= 1,
+			.buf	= &start,
+		}, {
+			.addr	= DDC_ADDR,
+			.flags	= I2C_M_RD,
+			.len	= EDID_LENGTH,
+			.buf	= buf,
+		}
+	};
+
+	if (!buf) {
+		dev_warn(&adapter->dev, "unable to allocate memory for EDID "
+			 "block.\n");
+		return NULL;
+	}
+
+	if (i2c_transfer(adapter, msgs, 2) == 2)
+		return buf;
+
+	dev_info(&adapter->dev, "unable to read EDID block.\n");
+	kfree(buf);
+	return NULL;
+}
+EXPORT_SYMBOL(drm_do_probe_ddc_edid);
+
+static unsigned char *drm_ddc_read(struct i2c_adapter *adapter)
+{
+	struct i2c_algo_bit_data *algo_data = adapter->algo_data;
+	unsigned char *edid = NULL;
+	int i, j;
+
+	algo_data->setscl(algo_data->data, 1);
+
+	for (i = 0; i < 1; i++) {
+		/* For some old monitors we need the
+		 * following process to initialize/stop DDC
+		 */
+		algo_data->setsda(algo_data->data, 1);
+		msleep(13);
+
+		algo_data->setscl(algo_data->data, 1);
+		for (j = 0; j < 5; j++) {
+			msleep(10);
+			if (algo_data->getscl(algo_data->data))
+				break;
+		}
+		if (j == 5)
+			continue;
+
+		algo_data->setsda(algo_data->data, 0);
+		msleep(15);
+		algo_data->setscl(algo_data->data, 0);
+		msleep(15);
+		algo_data->setsda(algo_data->data, 1);
+		msleep(15);
+
+		/* Do the real work */
+		edid = drm_do_probe_ddc_edid(adapter);
+		algo_data->setsda(algo_data->data, 0);
+		algo_data->setscl(algo_data->data, 0);
+		msleep(15);
+
+		algo_data->setscl(algo_data->data, 1);
+		for (j = 0; j < 10; j++) {
+			msleep(10);
+			if (algo_data->getscl(algo_data->data))
+				break;
+		}
+
+		algo_data->setsda(algo_data->data, 1);
+		msleep(15);
+		algo_data->setscl(algo_data->data, 0);
+		algo_data->setsda(algo_data->data, 0);
+		if (edid)
+			break;
+	}
+	/* Release the DDC lines when done or the Apple Cinema HD display
+	 * will switch off
+	 */
+	algo_data->setsda(algo_data->data, 1);
+	algo_data->setscl(algo_data->data, 1);
+
+	return edid;
+}
+
+/**
+ * drm_get_edid - get EDID data, if available
+ * @connector: connector we're probing
+ * @adapter: i2c adapter to use for DDC
+ *
+ * Poke the given connector's i2c channel to grab EDID data if possible.
+ *
+ * Return edid data or NULL if we couldn't find any.
+ */
+struct edid *drm_get_edid(struct drm_connector *connector,
+			  struct i2c_adapter *adapter)
+{
+	struct edid *edid;
+
+	edid = (struct edid *)drm_ddc_read(adapter);
+	if (!edid) {
+		dev_warn(&connector->dev->pdev->dev, "%s: no EDID data\n",
+			 drm_get_connector_name(connector));
+		return NULL;
+	}
+	if (!edid_is_valid(edid)) {
+		dev_warn(&connector->dev->pdev->dev, "%s: EDID invalid.\n",
+			 drm_get_connector_name(connector));
+		kfree(edid);
+		return NULL;
+	}
+
+	connector->display_info.raw_edid = (char *)edid;
+
+	return edid;
+}
+EXPORT_SYMBOL(drm_get_edid);
+
+/**
+ * drm_add_edid_modes - add modes from EDID data, if available
+ * @connector: connector we're probing
+ * @edid: edid data
+ *
+ * Add the specified modes to the connector's mode list.
+ *
+ * Return number of modes added or 0 if we couldn't find any.
+ */
+int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
+{
+	int num_modes = 0;
+	u32 quirks;
+
+	if (edid == NULL) {
+		return 0;
+	}
+	if (!edid_is_valid(edid)) {
+		dev_warn(&connector->dev->pdev->dev, "%s: EDID invalid.\n",
+			 drm_get_connector_name(connector));
+		return 0;
+	}
+
+	quirks = edid_get_quirks(edid);
+
+	num_modes += add_established_modes(connector, edid);
+	num_modes += add_standard_modes(connector, edid);
+	num_modes += add_detailed_info(connector, edid, quirks);
+
+	if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75))
+		edid_fixup_preferred(connector, quirks);
+
+	connector->display_info.serration_vsync = edid->serration_vsync;
+	connector->display_info.sync_on_green = edid->sync_on_green;
+	connector->display_info.composite_sync = edid->composite_sync;
+	connector->display_info.separate_syncs = edid->separate_syncs;
+	connector->display_info.blank_to_black = edid->blank_to_black;
+	connector->display_info.video_level = edid->video_level;
+	connector->display_info.digital = edid->digital;
+	connector->display_info.width_mm = edid->width_cm * 10;
+	connector->display_info.height_mm = edid->height_cm * 10;
+	connector->display_info.gamma = edid->gamma;
+	connector->display_info.gtf_supported = edid->default_gtf;
+	connector->display_info.standard_color = edid->standard_color;
+	connector->display_info.display_type = edid->display_type;
+	connector->display_info.active_off_supported = edid->pm_active_off;
+	connector->display_info.suspend_supported = edid->pm_suspend;
+	connector->display_info.standby_supported = edid->pm_standby;
+	connector->display_info.gamma = edid->gamma;
+
+	return num_modes;
+}
+EXPORT_SYMBOL(drm_add_edid_modes);
diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
index 3a6c439652a..3733e36d135 100644
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -35,7 +35,6 @@
  */
 
 #include "drmP.h"
-#include "drm_sarea.h"
 #include <linux/poll.h>
 #include <linux/smp_lock.h>
 
@@ -55,10 +54,12 @@ static int drm_setup(struct drm_device * dev)
 
 	atomic_set(&dev->ioctl_count, 0);
 	atomic_set(&dev->vma_count, 0);
-	dev->buf_use = 0;
-	atomic_set(&dev->buf_alloc, 0);
 
-	if (drm_core_check_feature(dev, DRIVER_HAVE_DMA)) {
+	if (drm_core_check_feature(dev, DRIVER_HAVE_DMA) &&
+	    !drm_core_check_feature(dev, DRIVER_MODESET)) {
+		dev->buf_use = 0;
+		atomic_set(&dev->buf_alloc, 0);
+
 		i = drm_dma_setup(dev);
 		if (i < 0)
 			return i;
@@ -138,14 +139,14 @@ int drm_open(struct inode *inode, struct file *filp)
 		}
 		spin_unlock(&dev->count_lock);
 	}
-
 out:
 	mutex_lock(&dev->struct_mutex);
-	if (dev->dev_mapping == NULL)
-		dev->dev_mapping = inode->i_mapping;
-	else if (dev->dev_mapping != inode->i_mapping)
-		WARN(1, "dev->dev_mapping not inode mapping (%p expected %p)\n",
-		     dev->dev_mapping, inode->i_mapping);
+	if (minor->type == DRM_MINOR_LEGACY) {
+		BUG_ON((dev->dev_mapping != NULL) &&
+			(dev->dev_mapping != inode->i_mapping));
+		if (dev->dev_mapping == NULL)
+			dev->dev_mapping = inode->i_mapping;
+	}
 	mutex_unlock(&dev->struct_mutex);
 
 	return retcode;
@@ -251,6 +252,7 @@ static int drm_open_helper(struct inode *inode, struct file *filp,
 	priv->lock_count = 0;
 
 	INIT_LIST_HEAD(&priv->lhead);
+	INIT_LIST_HEAD(&priv->fbs);
 
 	if (dev->driver->driver_features & DRIVER_GEM)
 		drm_gem_open(dev, priv);
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 1e787f894b3..1608f8dbfda 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -305,6 +305,8 @@ int drm_control(struct drm_device *dev, void *data,
 	case DRM_INST_HANDLER:
 		if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
 			return 0;
+		if (drm_core_check_feature(dev, DRIVER_MODESET))
+			return 0;
 		if (dev->if_version < DRM_IF_VERSION(1, 2) &&
 		    ctl->irq != dev->pdev->irq)
 			return -EINVAL;
@@ -312,6 +314,8 @@ int drm_control(struct drm_device *dev, void *data,
 	case DRM_UNINST_HANDLER:
 		if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
 			return 0;
+		if (drm_core_check_feature(dev, DRIVER_MODESET))
+			return 0;
 		return drm_irq_uninstall(dev);
 	default:
 		return -EINVAL;
@@ -427,6 +431,45 @@ void drm_vblank_put(struct drm_device *dev, int crtc)
 EXPORT_SYMBOL(drm_vblank_put);
 
 /**
+ * drm_vblank_pre_modeset - account for vblanks across mode sets
+ * @dev: DRM device
+ * @crtc: CRTC in question
+ * @post: post or pre mode set?
+ *
+ * Account for vblank events across mode setting events, which will likely
+ * reset the hardware frame counter.
+ */
+void drm_vblank_pre_modeset(struct drm_device *dev, int crtc)
+{
+	/*
+	 * To avoid all the problems that might happen if interrupts
+	 * were enabled/disabled around or between these calls, we just
+	 * have the kernel take a reference on the CRTC (just once though
+	 * to avoid corrupting the count if multiple, mismatch calls occur),
+	 * so that interrupts remain enabled in the interim.
+	 */
+	if (!dev->vblank_inmodeset[crtc]) {
+		dev->vblank_inmodeset[crtc] = 1;
+		drm_vblank_get(dev, crtc);
+	}
+}
+EXPORT_SYMBOL(drm_vblank_pre_modeset);
+
+void drm_vblank_post_modeset(struct drm_device *dev, int crtc)
+{
+	unsigned long irqflags;
+
+	if (dev->vblank_inmodeset[crtc]) {
+		spin_lock_irqsave(&dev->vbl_lock, irqflags);
+		dev->vblank_disable_allowed = 1;
+		dev->vblank_inmodeset[crtc] = 0;
+		spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
+		drm_vblank_put(dev, crtc);
+	}
+}
+EXPORT_SYMBOL(drm_vblank_post_modeset);
+
+/**
  * drm_modeset_ctl - handle vblank event counter changes across mode switch
  * @DRM_IOCTL_ARGS: standard ioctl arguments
  *
@@ -441,7 +484,6 @@ int drm_modeset_ctl(struct drm_device *dev, void *data,
 		    struct drm_file *file_priv)
 {
 	struct drm_modeset_ctl *modeset = data;
-	unsigned long irqflags;
 	int crtc, ret = 0;
 
 	/* If drm_vblank_init() hasn't been called yet, just no-op */
@@ -454,28 +496,12 @@ int drm_modeset_ctl(struct drm_device *dev, void *data,
 		goto out;
 	}
 
-	/*
-	 * To avoid all the problems that might happen if interrupts
-	 * were enabled/disabled around or between these calls, we just
-	 * have the kernel take a reference on the CRTC (just once though
-	 * to avoid corrupting the count if multiple, mismatch calls occur),
-	 * so that interrupts remain enabled in the interim.
-	 */
 	switch (modeset->cmd) {
 	case _DRM_PRE_MODESET:
-		if (!dev->vblank_inmodeset[crtc]) {
-			dev->vblank_inmodeset[crtc] = 1;
-			drm_vblank_get(dev, crtc);
-		}
+		drm_vblank_pre_modeset(dev, crtc);
 		break;
 	case _DRM_POST_MODESET:
-		if (dev->vblank_inmodeset[crtc]) {
-			spin_lock_irqsave(&dev->vbl_lock, irqflags);
-			dev->vblank_disable_allowed = 1;
-			dev->vblank_inmodeset[crtc] = 0;
-			spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-			drm_vblank_put(dev, crtc);
-		}
+		drm_vblank_post_modeset(dev, crtc);
 		break;
 	default:
 		ret = -EINVAL;
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 217ad7dc707..367c590ffbb 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -296,3 +296,4 @@ void drm_mm_takedown(struct drm_mm * mm)
 
 	drm_free(entry, sizeof(*entry), DRM_MEM_MM);
 }
+EXPORT_SYMBOL(drm_mm_takedown);
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
new file mode 100644
index 00000000000..c9b80fdd463
--- /dev/null
+++ b/drivers/gpu/drm/drm_modes.c
@@ -0,0 +1,576 @@
+/*
+ * The list_sort function is (presumably) licensed under the GPL (see the
+ * top level "COPYING" file for details).
+ *
+ * The remainder of this file is:
+ *
+ * Copyright © 1997-2003 by The XFree86 Project, Inc.
+ * Copyright © 2007 Dave Airlie
+ * Copyright © 2007-2008 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of the copyright holder(s)
+ * and author(s) shall not be used in advertising or otherwise to promote
+ * the sale, use or other dealings in this Software without prior written
+ * authorization from the copyright holder(s) and author(s).
+ */
+
+#include <linux/list.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+
+/**
+ * drm_mode_debug_printmodeline - debug print a mode
+ * @dev: DRM device
+ * @mode: mode to print
+ *
+ * LOCKING:
+ * None.
+ *
+ * Describe @mode using DRM_DEBUG.
+ */
+void drm_mode_debug_printmodeline(struct drm_display_mode *mode)
+{
+	DRM_DEBUG("Modeline %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x\n",
+		  mode->base.id, mode->name, mode->vrefresh, mode->clock,
+		  mode->hdisplay, mode->hsync_start,
+		  mode->hsync_end, mode->htotal,
+		  mode->vdisplay, mode->vsync_start,
+		  mode->vsync_end, mode->vtotal, mode->type, mode->flags);
+}
+EXPORT_SYMBOL(drm_mode_debug_printmodeline);
+
+/**
+ * drm_mode_set_name - set the name on a mode
+ * @mode: name will be set in this mode
+ *
+ * LOCKING:
+ * None.
+ *
+ * Set the name of @mode to a standard format.
+ */
+void drm_mode_set_name(struct drm_display_mode *mode)
+{
+	snprintf(mode->name, DRM_DISPLAY_MODE_LEN, "%dx%d", mode->hdisplay,
+		 mode->vdisplay);
+}
+EXPORT_SYMBOL(drm_mode_set_name);
+
+/**
+ * drm_mode_list_concat - move modes from one list to another
+ * @head: source list
+ * @new: dst list
+ *
+ * LOCKING:
+ * Caller must ensure both lists are locked.
+ *
+ * Move all the modes from @head to @new.
+ */
+void drm_mode_list_concat(struct list_head *head, struct list_head *new)
+{
+
+	struct list_head *entry, *tmp;
+
+	list_for_each_safe(entry, tmp, head) {
+		list_move_tail(entry, new);
+	}
+}
+EXPORT_SYMBOL(drm_mode_list_concat);
+
+/**
+ * drm_mode_width - get the width of a mode
+ * @mode: mode
+ *
+ * LOCKING:
+ * None.
+ *
+ * Return @mode's width (hdisplay) value.
+ *
+ * FIXME: is this needed?
+ *
+ * RETURNS:
+ * @mode->hdisplay
+ */
+int drm_mode_width(struct drm_display_mode *mode)
+{
+	return mode->hdisplay;
+
+}
+EXPORT_SYMBOL(drm_mode_width);
+
+/**
+ * drm_mode_height - get the height of a mode
+ * @mode: mode
+ *
+ * LOCKING:
+ * None.
+ *
+ * Return @mode's height (vdisplay) value.
+ *
+ * FIXME: is this needed?
+ *
+ * RETURNS:
+ * @mode->vdisplay
+ */
+int drm_mode_height(struct drm_display_mode *mode)
+{
+	return mode->vdisplay;
+}
+EXPORT_SYMBOL(drm_mode_height);
+
+/**
+ * drm_mode_vrefresh - get the vrefresh of a mode
+ * @mode: mode
+ *
+ * LOCKING:
+ * None.
+ *
+ * Return @mode's vrefresh rate or calculate it if necessary.
+ *
+ * FIXME: why is this needed?  shouldn't vrefresh be set already?
+ *
+ * RETURNS:
+ * Vertical refresh rate of @mode x 1000. For precision reasons.
+ */
+int drm_mode_vrefresh(struct drm_display_mode *mode)
+{
+	int refresh = 0;
+	unsigned int calc_val;
+
+	if (mode->vrefresh > 0)
+		refresh = mode->vrefresh;
+	else if (mode->htotal > 0 && mode->vtotal > 0) {
+		/* work out vrefresh the value will be x1000 */
+		calc_val = (mode->clock * 1000);
+
+		calc_val /= mode->htotal;
+		calc_val *= 1000;
+		calc_val /= mode->vtotal;
+
+		refresh = calc_val;
+		if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+			refresh *= 2;
+		if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+			refresh /= 2;
+		if (mode->vscan > 1)
+			refresh /= mode->vscan;
+	}
+	return refresh;
+}
+EXPORT_SYMBOL(drm_mode_vrefresh);
+
+/**
+ * drm_mode_set_crtcinfo - set CRTC modesetting parameters
+ * @p: mode
+ * @adjust_flags: unused? (FIXME)
+ *
+ * LOCKING:
+ * None.
+ *
+ * Setup the CRTC modesetting parameters for @p, adjusting if necessary.
+ */
+void drm_mode_set_crtcinfo(struct drm_display_mode *p, int adjust_flags)
+{
+	if ((p == NULL) || ((p->type & DRM_MODE_TYPE_CRTC_C) == DRM_MODE_TYPE_BUILTIN))
+		return;
+
+	p->crtc_hdisplay = p->hdisplay;
+	p->crtc_hsync_start = p->hsync_start;
+	p->crtc_hsync_end = p->hsync_end;
+	p->crtc_htotal = p->htotal;
+	p->crtc_hskew = p->hskew;
+	p->crtc_vdisplay = p->vdisplay;
+	p->crtc_vsync_start = p->vsync_start;
+	p->crtc_vsync_end = p->vsync_end;
+	p->crtc_vtotal = p->vtotal;
+
+	if (p->flags & DRM_MODE_FLAG_INTERLACE) {
+		if (adjust_flags & CRTC_INTERLACE_HALVE_V) {
+			p->crtc_vdisplay /= 2;
+			p->crtc_vsync_start /= 2;
+			p->crtc_vsync_end /= 2;
+			p->crtc_vtotal /= 2;
+		}
+
+		p->crtc_vtotal |= 1;
+	}
+
+	if (p->flags & DRM_MODE_FLAG_DBLSCAN) {
+		p->crtc_vdisplay *= 2;
+		p->crtc_vsync_start *= 2;
+		p->crtc_vsync_end *= 2;
+		p->crtc_vtotal *= 2;
+	}
+
+	if (p->vscan > 1) {
+		p->crtc_vdisplay *= p->vscan;
+		p->crtc_vsync_start *= p->vscan;
+		p->crtc_vsync_end *= p->vscan;
+		p->crtc_vtotal *= p->vscan;
+	}
+
+	p->crtc_vblank_start = min(p->crtc_vsync_start, p->crtc_vdisplay);
+	p->crtc_vblank_end = max(p->crtc_vsync_end, p->crtc_vtotal);
+	p->crtc_hblank_start = min(p->crtc_hsync_start, p->crtc_hdisplay);
+	p->crtc_hblank_end = max(p->crtc_hsync_end, p->crtc_htotal);
+
+	p->crtc_hadjusted = false;
+	p->crtc_vadjusted = false;
+}
+EXPORT_SYMBOL(drm_mode_set_crtcinfo);
+
+
+/**
+ * drm_mode_duplicate - allocate and duplicate an existing mode
+ * @m: mode to duplicate
+ *
+ * LOCKING:
+ * None.
+ *
+ * Just allocate a new mode, copy the existing mode into it, and return
+ * a pointer to it.  Used to create new instances of established modes.
+ */
+struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,
+					    struct drm_display_mode *mode)
+{
+	struct drm_display_mode *nmode;
+	int new_id;
+
+	nmode = drm_mode_create(dev);
+	if (!nmode)
+		return NULL;
+
+	new_id = nmode->base.id;
+	*nmode = *mode;
+	nmode->base.id = new_id;
+	INIT_LIST_HEAD(&nmode->head);
+	return nmode;
+}
+EXPORT_SYMBOL(drm_mode_duplicate);
+
+/**
+ * drm_mode_equal - test modes for equality
+ * @mode1: first mode
+ * @mode2: second mode
+ *
+ * LOCKING:
+ * None.
+ *
+ * Check to see if @mode1 and @mode2 are equivalent.
+ *
+ * RETURNS:
+ * True if the modes are equal, false otherwise.
+ */
+bool drm_mode_equal(struct drm_display_mode *mode1, struct drm_display_mode *mode2)
+{
+	/* do clock check convert to PICOS so fb modes get matched
+	 * the same */
+	if (mode1->clock && mode2->clock) {
+		if (KHZ2PICOS(mode1->clock) != KHZ2PICOS(mode2->clock))
+			return false;
+	} else if (mode1->clock != mode2->clock)
+		return false;
+
+	if (mode1->hdisplay == mode2->hdisplay &&
+	    mode1->hsync_start == mode2->hsync_start &&
+	    mode1->hsync_end == mode2->hsync_end &&
+	    mode1->htotal == mode2->htotal &&
+	    mode1->hskew == mode2->hskew &&
+	    mode1->vdisplay == mode2->vdisplay &&
+	    mode1->vsync_start == mode2->vsync_start &&
+	    mode1->vsync_end == mode2->vsync_end &&
+	    mode1->vtotal == mode2->vtotal &&
+	    mode1->vscan == mode2->vscan &&
+	    mode1->flags == mode2->flags)
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL(drm_mode_equal);
+
+/**
+ * drm_mode_validate_size - make sure modes adhere to size constraints
+ * @dev: DRM device
+ * @mode_list: list of modes to check
+ * @maxX: maximum width
+ * @maxY: maximum height
+ * @maxPitch: max pitch
+ *
+ * LOCKING:
+ * Caller must hold a lock protecting @mode_list.
+ *
+ * The DRM device (@dev) has size and pitch limits.  Here we validate the
+ * modes we probed for @dev against those limits and set their status as
+ * necessary.
+ */
+void drm_mode_validate_size(struct drm_device *dev,
+			    struct list_head *mode_list,
+			    int maxX, int maxY, int maxPitch)
+{
+	struct drm_display_mode *mode;
+
+	list_for_each_entry(mode, mode_list, head) {
+		if (maxPitch > 0 && mode->hdisplay > maxPitch)
+			mode->status = MODE_BAD_WIDTH;
+
+		if (maxX > 0 && mode->hdisplay > maxX)
+			mode->status = MODE_VIRTUAL_X;
+
+		if (maxY > 0 && mode->vdisplay > maxY)
+			mode->status = MODE_VIRTUAL_Y;
+	}
+}
+EXPORT_SYMBOL(drm_mode_validate_size);
+
+/**
+ * drm_mode_validate_clocks - validate modes against clock limits
+ * @dev: DRM device
+ * @mode_list: list of modes to check
+ * @min: minimum clock rate array
+ * @max: maximum clock rate array
+ * @n_ranges: number of clock ranges (size of arrays)
+ *
+ * LOCKING:
+ * Caller must hold a lock protecting @mode_list.
+ *
+ * Some code may need to check a mode list against the clock limits of the
+ * device in question.  This function walks the mode list, testing to make
+ * sure each mode falls within a given range (defined by @min and @max
+ * arrays) and sets @mode->status as needed.
+ */
+void drm_mode_validate_clocks(struct drm_device *dev,
+			      struct list_head *mode_list,
+			      int *min, int *max, int n_ranges)
+{
+	struct drm_display_mode *mode;
+	int i;
+
+	list_for_each_entry(mode, mode_list, head) {
+		bool good = false;
+		for (i = 0; i < n_ranges; i++) {
+			if (mode->clock >= min[i] && mode->clock <= max[i]) {
+				good = true;
+				break;
+			}
+		}
+		if (!good)
+			mode->status = MODE_CLOCK_RANGE;
+	}
+}
+EXPORT_SYMBOL(drm_mode_validate_clocks);
+
+/**
+ * drm_mode_prune_invalid - remove invalid modes from mode list
+ * @dev: DRM device
+ * @mode_list: list of modes to check
+ * @verbose: be verbose about it
+ *
+ * LOCKING:
+ * Caller must hold a lock protecting @mode_list.
+ *
+ * Once mode list generation is complete, a caller can use this routine to
+ * remove invalid modes from a mode list.  If any of the modes have a
+ * status other than %MODE_OK, they are removed from @mode_list and freed.
+ */
+void drm_mode_prune_invalid(struct drm_device *dev,
+			    struct list_head *mode_list, bool verbose)
+{
+	struct drm_display_mode *mode, *t;
+
+	list_for_each_entry_safe(mode, t, mode_list, head) {
+		if (mode->status != MODE_OK) {
+			list_del(&mode->head);
+			if (verbose) {
+				drm_mode_debug_printmodeline(mode);
+				DRM_DEBUG("Not using %s mode %d\n", mode->name, mode->status);
+			}
+			drm_mode_destroy(dev, mode);
+		}
+	}
+}
+EXPORT_SYMBOL(drm_mode_prune_invalid);
+
+/**
+ * drm_mode_compare - compare modes for favorability
+ * @lh_a: list_head for first mode
+ * @lh_b: list_head for second mode
+ *
+ * LOCKING:
+ * None.
+ *
+ * Compare two modes, given by @lh_a and @lh_b, returning a value indicating
+ * which is better.
+ *
+ * RETURNS:
+ * Negative if @lh_a is better than @lh_b, zero if they're equivalent, or
+ * positive if @lh_b is better than @lh_a.
+ */
+static int drm_mode_compare(struct list_head *lh_a, struct list_head *lh_b)
+{
+	struct drm_display_mode *a = list_entry(lh_a, struct drm_display_mode, head);
+	struct drm_display_mode *b = list_entry(lh_b, struct drm_display_mode, head);
+	int diff;
+
+	diff = ((b->type & DRM_MODE_TYPE_PREFERRED) != 0) -
+		((a->type & DRM_MODE_TYPE_PREFERRED) != 0);
+	if (diff)
+		return diff;
+	diff = b->hdisplay * b->vdisplay - a->hdisplay * a->vdisplay;
+	if (diff)
+		return diff;
+	diff = b->clock - a->clock;
+	return diff;
+}
+
+/* FIXME: what we don't have a list sort function? */
+/* list sort from Mark J Roberts (mjr@znex.org) */
+void list_sort(struct list_head *head,
+	       int (*cmp)(struct list_head *a, struct list_head *b))
+{
+	struct list_head *p, *q, *e, *list, *tail, *oldhead;
+	int insize, nmerges, psize, qsize, i;
+
+	list = head->next;
+	list_del(head);
+	insize = 1;
+	for (;;) {
+		p = oldhead = list;
+		list = tail = NULL;
+		nmerges = 0;
+
+		while (p) {
+			nmerges++;
+			q = p;
+			psize = 0;
+			for (i = 0; i < insize; i++) {
+				psize++;
+				q = q->next == oldhead ? NULL : q->next;
+				if (!q)
+					break;
+			}
+
+			qsize = insize;
+			while (psize > 0 || (qsize > 0 && q)) {
+				if (!psize) {
+					e = q;
+					q = q->next;
+					qsize--;
+					if (q == oldhead)
+						q = NULL;
+				} else if (!qsize || !q) {
+					e = p;
+					p = p->next;
+					psize--;
+					if (p == oldhead)
+						p = NULL;
+				} else if (cmp(p, q) <= 0) {
+					e = p;
+					p = p->next;
+					psize--;
+					if (p == oldhead)
+						p = NULL;
+				} else {
+					e = q;
+					q = q->next;
+					qsize--;
+					if (q == oldhead)
+						q = NULL;
+				}
+				if (tail)
+					tail->next = e;
+				else
+					list = e;
+				e->prev = tail;
+				tail = e;
+			}
+			p = q;
+		}
+
+		tail->next = list;
+		list->prev = tail;
+
+		if (nmerges <= 1)
+			break;
+
+		insize *= 2;
+	}
+
+	head->next = list;
+	head->prev = list->prev;
+	list->prev->next = head;
+	list->prev = head;
+}
+
+/**
+ * drm_mode_sort - sort mode list
+ * @mode_list: list to sort
+ *
+ * LOCKING:
+ * Caller must hold a lock protecting @mode_list.
+ *
+ * Sort @mode_list by favorability, putting good modes first.
+ */
+void drm_mode_sort(struct list_head *mode_list)
+{
+	list_sort(mode_list, drm_mode_compare);
+}
+EXPORT_SYMBOL(drm_mode_sort);
+
+/**
+ * drm_mode_connector_list_update - update the mode list for the connector
+ * @connector: the connector to update
+ *
+ * LOCKING:
+ * Caller must hold a lock protecting @mode_list.
+ *
+ * This moves the modes from the @connector probed_modes list
+ * to the actual mode list. It compares the probed mode against the current
+ * list and only adds different modes. All modes unverified after this point
+ * will be removed by the prune invalid modes.
+ */
+void drm_mode_connector_list_update(struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+	struct drm_display_mode *pmode, *pt;
+	int found_it;
+
+	list_for_each_entry_safe(pmode, pt, &connector->probed_modes,
+				 head) {
+		found_it = 0;
+		/* go through current modes checking for the new probed mode */
+		list_for_each_entry(mode, &connector->modes, head) {
+			if (drm_mode_equal(pmode, mode)) {
+				found_it = 1;
+				/* if equal delete the probed mode */
+				mode->status = pmode->status;
+				list_del(&pmode->head);
+				drm_mode_destroy(connector->dev, pmode);
+				break;
+			}
+		}
+
+		if (!found_it) {
+			list_move_tail(&pmode->head, &connector->modes);
+		}
+	}
+}
+EXPORT_SYMBOL(drm_mode_connector_list_update);
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index ea7f9e5d47f..5ca132afa4f 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -57,6 +57,14 @@ static int drm_minor_get_id(struct drm_device *dev, int type)
 	int ret;
 	int base = 0, limit = 63;
 
+	if (type == DRM_MINOR_CONTROL) {
+                base += 64;
+                limit = base + 127;
+        } else if (type == DRM_MINOR_RENDER) {
+                base += 128;
+                limit = base + 255;
+        }
+
 again:
 	if (idr_pre_get(&drm_minors_idr, GFP_KERNEL) == 0) {
 		DRM_ERROR("Out of memory expanding drawable idr\n");
@@ -362,12 +370,28 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent,
 		printk(KERN_ERR "DRM: Fill_in_dev failed.\n");
 		goto err_g2;
 	}
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		ret = drm_get_minor(dev, &dev->control, DRM_MINOR_CONTROL);
+		if (ret)
+			goto err_g2;
+	}
+
 	if ((ret = drm_get_minor(dev, &dev->primary, DRM_MINOR_LEGACY)))
-		goto err_g2;
+		goto err_g3;
 
-	if (dev->driver->load)
-		if ((ret = dev->driver->load(dev, ent->driver_data)))
+	if (dev->driver->load) {
+		ret = dev->driver->load(dev, ent->driver_data);
+		if (ret)
 			goto err_g3;
+	}
+
+        /* setup the grouping for the legacy output */
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		ret = drm_mode_group_init_legacy_group(dev, &dev->primary->mode_group);
+		if (ret)
+			goto err_g3;
+	}
 
 	list_add_tail(&dev->driver_item, &driver->device_list);
 
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 1611b9bcbe7..65d72d094c8 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -20,6 +20,7 @@
 #include "drmP.h"
 
 #define to_drm_minor(d) container_of(d, struct drm_minor, kdev)
+#define to_drm_connector(d) container_of(d, struct drm_connector, kdev)
 
 /**
  * drm_sysfs_suspend - DRM class suspend hook
@@ -34,7 +35,7 @@ static int drm_sysfs_suspend(struct device *dev, pm_message_t state)
 	struct drm_minor *drm_minor = to_drm_minor(dev);
 	struct drm_device *drm_dev = drm_minor->dev;
 
-	if (drm_dev->driver->suspend)
+	if (drm_minor->type == DRM_MINOR_LEGACY && drm_dev->driver->suspend)
 		return drm_dev->driver->suspend(drm_dev, state);
 
 	return 0;
@@ -52,7 +53,7 @@ static int drm_sysfs_resume(struct device *dev)
 	struct drm_minor *drm_minor = to_drm_minor(dev);
 	struct drm_device *drm_dev = drm_minor->dev;
 
-	if (drm_dev->driver->resume)
+	if (drm_minor->type == DRM_MINOR_LEGACY && drm_dev->driver->resume)
 		return drm_dev->driver->resume(drm_dev);
 
 	return 0;
@@ -144,6 +145,323 @@ static void drm_sysfs_device_release(struct device *dev)
 	return;
 }
 
+/*
+ * Connector properties
+ */
+static ssize_t status_show(struct device *device,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct drm_connector *connector = to_drm_connector(device);
+	enum drm_connector_status status;
+
+	status = connector->funcs->detect(connector);
+	return snprintf(buf, PAGE_SIZE, "%s",
+			drm_get_connector_status_name(status));
+}
+
+static ssize_t dpms_show(struct device *device,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct drm_connector *connector = to_drm_connector(device);
+	struct drm_device *dev = connector->dev;
+	uint64_t dpms_status;
+	int ret;
+
+	ret = drm_connector_property_get_value(connector,
+					    dev->mode_config.dpms_property,
+					    &dpms_status);
+	if (ret)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "%s",
+			drm_get_dpms_name((int)dpms_status));
+}
+
+static ssize_t enabled_show(struct device *device,
+			    struct device_attribute *attr,
+			   char *buf)
+{
+	struct drm_connector *connector = to_drm_connector(device);
+
+	return snprintf(buf, PAGE_SIZE, connector->encoder ? "enabled" :
+			"disabled");
+}
+
+static ssize_t edid_show(struct kobject *kobj, struct bin_attribute *attr,
+			 char *buf, loff_t off, size_t count)
+{
+	struct device *connector_dev = container_of(kobj, struct device, kobj);
+	struct drm_connector *connector = to_drm_connector(connector_dev);
+	unsigned char *edid;
+	size_t size;
+
+	if (!connector->edid_blob_ptr)
+		return 0;
+
+	edid = connector->edid_blob_ptr->data;
+	size = connector->edid_blob_ptr->length;
+	if (!edid)
+		return 0;
+
+	if (off >= size)
+		return 0;
+
+	if (off + count > size)
+		count = size - off;
+	memcpy(buf, edid + off, count);
+
+	return count;
+}
+
+static ssize_t modes_show(struct device *device,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct drm_connector *connector = to_drm_connector(device);
+	struct drm_display_mode *mode;
+	int written = 0;
+
+	list_for_each_entry(mode, &connector->modes, head) {
+		written += snprintf(buf + written, PAGE_SIZE - written, "%s\n",
+				    mode->name);
+	}
+
+	return written;
+}
+
+static ssize_t subconnector_show(struct device *device,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct drm_connector *connector = to_drm_connector(device);
+	struct drm_device *dev = connector->dev;
+	struct drm_property *prop = NULL;
+	uint64_t subconnector;
+	int is_tv = 0;
+	int ret;
+
+	switch (connector->connector_type) {
+		case DRM_MODE_CONNECTOR_DVII:
+			prop = dev->mode_config.dvi_i_subconnector_property;
+			break;
+		case DRM_MODE_CONNECTOR_Composite:
+		case DRM_MODE_CONNECTOR_SVIDEO:
+		case DRM_MODE_CONNECTOR_Component:
+			prop = dev->mode_config.tv_subconnector_property;
+			is_tv = 1;
+			break;
+		default:
+			DRM_ERROR("Wrong connector type for this property\n");
+			return 0;
+	}
+
+	if (!prop) {
+		DRM_ERROR("Unable to find subconnector property\n");
+		return 0;
+	}
+
+	ret = drm_connector_property_get_value(connector, prop, &subconnector);
+	if (ret)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "%s", is_tv ?
+			drm_get_tv_subconnector_name((int)subconnector) :
+			drm_get_dvi_i_subconnector_name((int)subconnector));
+}
+
+static ssize_t select_subconnector_show(struct device *device,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct drm_connector *connector = to_drm_connector(device);
+	struct drm_device *dev = connector->dev;
+	struct drm_property *prop = NULL;
+	uint64_t subconnector;
+	int is_tv = 0;
+	int ret;
+
+	switch (connector->connector_type) {
+		case DRM_MODE_CONNECTOR_DVII:
+			prop = dev->mode_config.dvi_i_select_subconnector_property;
+			break;
+		case DRM_MODE_CONNECTOR_Composite:
+		case DRM_MODE_CONNECTOR_SVIDEO:
+		case DRM_MODE_CONNECTOR_Component:
+			prop = dev->mode_config.tv_select_subconnector_property;
+			is_tv = 1;
+			break;
+		default:
+			DRM_ERROR("Wrong connector type for this property\n");
+			return 0;
+	}
+
+	if (!prop) {
+		DRM_ERROR("Unable to find select subconnector property\n");
+		return 0;
+	}
+
+	ret = drm_connector_property_get_value(connector, prop, &subconnector);
+	if (ret)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "%s", is_tv ?
+			drm_get_tv_select_name((int)subconnector) :
+			drm_get_dvi_i_select_name((int)subconnector));
+}
+
+static struct device_attribute connector_attrs[] = {
+	__ATTR_RO(status),
+	__ATTR_RO(enabled),
+	__ATTR_RO(dpms),
+	__ATTR_RO(modes),
+};
+
+/* These attributes are for both DVI-I connectors and all types of tv-out. */
+static struct device_attribute connector_attrs_opt1[] = {
+	__ATTR_RO(subconnector),
+	__ATTR_RO(select_subconnector),
+};
+
+static struct bin_attribute edid_attr = {
+	.attr.name = "edid",
+	.size = 128,
+	.read = edid_show,
+};
+
+/**
+ * drm_sysfs_connector_add - add an connector to sysfs
+ * @connector: connector to add
+ *
+ * Create an connector device in sysfs, along with its associated connector
+ * properties (so far, connection status, dpms, mode list & edid) and
+ * generate a hotplug event so userspace knows there's a new connector
+ * available.
+ *
+ * Note:
+ * This routine should only be called *once* for each DRM minor registered.
+ * A second call for an already registered device will trigger the BUG_ON
+ * below.
+ */
+int drm_sysfs_connector_add(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	int ret = 0, i, j;
+
+	/* We shouldn't get called more than once for the same connector */
+	BUG_ON(device_is_registered(&connector->kdev));
+
+	connector->kdev.parent = &dev->primary->kdev;
+	connector->kdev.class = drm_class;
+	connector->kdev.release = drm_sysfs_device_release;
+
+	DRM_DEBUG("adding \"%s\" to sysfs\n",
+		  drm_get_connector_name(connector));
+
+	snprintf(connector->kdev.bus_id, BUS_ID_SIZE, "card%d-%s",
+		 dev->primary->index, drm_get_connector_name(connector));
+	ret = device_register(&connector->kdev);
+
+	if (ret) {
+		DRM_ERROR("failed to register connector device: %d\n", ret);
+		goto out;
+	}
+
+	/* Standard attributes */
+
+	for (i = 0; i < ARRAY_SIZE(connector_attrs); i++) {
+		ret = device_create_file(&connector->kdev, &connector_attrs[i]);
+		if (ret)
+			goto err_out_files;
+	}
+
+	/* Optional attributes */
+	/*
+	 * In the long run it maybe a good idea to make one set of
+	 * optionals per connector type.
+	 */
+	switch (connector->connector_type) {
+		case DRM_MODE_CONNECTOR_DVII:
+		case DRM_MODE_CONNECTOR_Composite:
+		case DRM_MODE_CONNECTOR_SVIDEO:
+		case DRM_MODE_CONNECTOR_Component:
+			for (i = 0; i < ARRAY_SIZE(connector_attrs_opt1); i++) {
+				ret = device_create_file(&connector->kdev, &connector_attrs_opt1[i]);
+				if (ret)
+					goto err_out_files;
+			}
+			break;
+		default:
+			break;
+	}
+
+	ret = sysfs_create_bin_file(&connector->kdev.kobj, &edid_attr);
+	if (ret)
+		goto err_out_files;
+
+	/* Let userspace know we have a new connector */
+	drm_sysfs_hotplug_event(dev);
+
+	return 0;
+
+err_out_files:
+	if (i > 0)
+		for (j = 0; j < i; j++)
+			device_remove_file(&connector->kdev,
+					   &connector_attrs[i]);
+	device_unregister(&connector->kdev);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(drm_sysfs_connector_add);
+
+/**
+ * drm_sysfs_connector_remove - remove an connector device from sysfs
+ * @connector: connector to remove
+ *
+ * Remove @connector and its associated attributes from sysfs.  Note that
+ * the device model core will take care of sending the "remove" uevent
+ * at this time, so we don't need to do it.
+ *
+ * Note:
+ * This routine should only be called if the connector was previously
+ * successfully registered.  If @connector hasn't been registered yet,
+ * you'll likely see a panic somewhere deep in sysfs code when called.
+ */
+void drm_sysfs_connector_remove(struct drm_connector *connector)
+{
+	int i;
+
+	DRM_DEBUG("removing \"%s\" from sysfs\n",
+		  drm_get_connector_name(connector));
+
+	for (i = 0; i < ARRAY_SIZE(connector_attrs); i++)
+		device_remove_file(&connector->kdev, &connector_attrs[i]);
+	sysfs_remove_bin_file(&connector->kdev.kobj, &edid_attr);
+	device_unregister(&connector->kdev);
+}
+EXPORT_SYMBOL(drm_sysfs_connector_remove);
+
+/**
+ * drm_sysfs_hotplug_event - generate a DRM uevent
+ * @dev: DRM device
+ *
+ * Send a uevent for the DRM device specified by @dev.  Currently we only
+ * set HOTPLUG=1 in the uevent environment, but this could be expanded to
+ * deal with other types of events.
+ */
+void drm_sysfs_hotplug_event(struct drm_device *dev)
+{
+	char *event_string = "HOTPLUG=1";
+	char *envp[] = { event_string, NULL };
+
+	DRM_DEBUG("generating hotplug event\n");
+
+	kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, envp);
+}
+
 /**
  * drm_sysfs_device_add - adds a class device to sysfs for a character driver
  * @dev: DRM device to be added
@@ -163,7 +481,12 @@ int drm_sysfs_device_add(struct drm_minor *minor)
 	minor->kdev.class = drm_class;
 	minor->kdev.release = drm_sysfs_device_release;
 	minor->kdev.devt = minor->device;
-	minor_str = "card%d";
+	if (minor->type == DRM_MINOR_CONTROL)
+		minor_str = "controlD%d";
+        else if (minor->type == DRM_MINOR_RENDER)
+                minor_str = "renderD%d";
+        else
+                minor_str = "card%d";
 
 	snprintf(minor->kdev.bus_id, BUS_ID_SIZE, minor_str, minor->index);
 
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 448d209a0bf..e6210725b9a 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -112,6 +112,23 @@ static int 		vga_video_font_height;
 static int 		vga_scan_lines		__read_mostly;
 static unsigned int 	vga_rolled_over;
 
+int vgacon_text_mode_force = 0;
+
+bool vgacon_text_force(void)
+{
+	return vgacon_text_mode_force ? true : false;
+}
+EXPORT_SYMBOL(vgacon_text_force);
+
+static int __init text_mode(char *str)
+{
+	vgacon_text_mode_force = 1;
+	return 1;
+}
+
+/* force text mode - used by kernel modesetting */
+__setup("nomodeset", text_mode);
+
 static int __init no_scroll(char *str)
 {
 	/*