m68k: atari - Rename "mfp" to "st_mfp"

http://kisskb.ellerman.id.au/kisskb/buildresult/72115/:
| net/mac80211/ieee80211_i.h:327: error: syntax error before 'volatile'
| net/mac80211/ieee80211_i.h:350: error: syntax error before '}' token
| net/mac80211/ieee80211_i.h:455: error: field 'sta' has incomplete type
| distcc[19430] ERROR: compile net/mac80211/main.c on sprygo/32 failed

This is caused by

| # define mfp ((*(volatile struct MFP*)MFP_BAS))

in arch/m68k/include/asm/atarihw.h, which conflicts with the new "mfp" enum in
net/mac80211/ieee80211_i.h.

Rename "mfp" to "st_mfp", as it's a way too generic name for a global #define.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

4 files changed, 17 insertions, 17 deletions

diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 69e1df7dfa1..4234c11c1e4 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1730,7 +1730,7 @@ static int __init fd_test_drive_present( int drive )
 
 	timeout = jiffies + 2*HZ+HZ/2;
 	while (time_before(jiffies, timeout))
-		if (!(mfp.par_dt_reg & 0x20))
+		if (!(st_mfp.par_dt_reg & 0x20))
 			break;
 
 	status = FDC_READ( FDCREG_STATUS );
@@ -1747,7 +1747,7 @@ static int __init fd_test_drive_present( int drive )
 		/* dummy seek command to make WP bit accessible */
 		FDC_WRITE( FDCREG_DATA, 0 );
 		FDC_WRITE( FDCREG_CMD, FDCCMD_SEEK );
-		while( mfp.par_dt_reg & 0x20 )
+		while( st_mfp.par_dt_reg & 0x20 )
 			;
 		status = FDC_READ( FDCREG_STATUS );
 	}
diff --git a/drivers/char/scc.h b/drivers/char/scc.h
index 93998f5baff..341b1142bea 100644
--- a/drivers/char/scc.h
+++ b/drivers/char/scc.h
@@ -387,7 +387,7 @@ struct scc_port {
 /* The SCC needs 3.5 PCLK cycles recovery time between to register
  * accesses. PCLK runs with 8 MHz on an Atari, so this delay is 3.5 *
  * 125 ns = 437.5 ns. This is too short for udelay().
- * 10/16/95: A tstb mfp.par_dt_reg takes 600ns (sure?) and thus should be
+ * 10/16/95: A tstb st_mfp.par_dt_reg takes 600ns (sure?) and thus should be
  * quite right
  */
 
diff --git a/drivers/parport/parport_atari.c b/drivers/parport/parport_atari.c
index ad4cdd25613..0b28fccec03 100644
--- a/drivers/parport/parport_atari.c
+++ b/drivers/parport/parport_atari.c
@@ -84,7 +84,7 @@ parport_atari_frob_control(struct parport *p, unsigned char mask,
 static unsigned char
 parport_atari_read_status(struct parport *p)
 {
-	return ((mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) |
+	return ((st_mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) |
 		PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR);
 }
 
@@ -193,9 +193,9 @@ static int __init parport_atari_init(void)
 		sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5);
 		local_irq_restore(flags);
 		/* MFP port I0 as input. */
-		mfp.data_dir &= ~1;
+		st_mfp.data_dir &= ~1;
 		/* MFP port I0 interrupt on high->low edge. */
-		mfp.active_edge &= ~1;
+		st_mfp.active_edge &= ~1;
 		p = parport_register_port((unsigned long)&sound_ym.wd_data,
 					  IRQ_MFP_BUSY, PARPORT_DMA_NONE,
 					  &parport_atari_ops);
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 8058572a742..018850c116c 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -841,7 +841,7 @@ static int tt_detect(void)
 		tt_dmasnd.ctrl = DMASND_CTRL_OFF;
 		udelay(20);		/* wait a while for things to settle down */
 	}
-	mono_moni = (mfp.par_dt_reg & 0x80) == 0;
+	mono_moni = (st_mfp.par_dt_reg & 0x80) == 0;
 
 	tt_get_par(&par);
 	tt_encode_var(&atafb_predefined[0], &par);
@@ -2035,7 +2035,7 @@ static int stste_detect(void)
 		tt_dmasnd.ctrl = DMASND_CTRL_OFF;
 		udelay(20);		/* wait a while for things to settle down */
 	}
-	mono_moni = (mfp.par_dt_reg & 0x80) == 0;
+	mono_moni = (st_mfp.par_dt_reg & 0x80) == 0;
 
 	stste_get_par(&par);
 	stste_encode_var(&atafb_predefined[0], &par);
@@ -2086,20 +2086,20 @@ static void st_ovsc_switch(void)
 		return;
 	local_irq_save(flags);
 
-	mfp.tim_ct_b = 0x10;
-	mfp.active_edge |= 8;
-	mfp.tim_ct_b = 0;
-	mfp.tim_dt_b = 0xf0;
-	mfp.tim_ct_b = 8;
-	while (mfp.tim_dt_b > 1)	/* TOS does it this way, don't ask why */
+	st_mfp.tim_ct_b = 0x10;
+	st_mfp.active_edge |= 8;
+	st_mfp.tim_ct_b = 0;
+	st_mfp.tim_dt_b = 0xf0;
+	st_mfp.tim_ct_b = 8;
+	while (st_mfp.tim_dt_b > 1)	/* TOS does it this way, don't ask why */
 		;
-	new = mfp.tim_dt_b;
+	new = st_mfp.tim_dt_b;
 	do {
 		udelay(LINE_DELAY);
 		old = new;
-		new = mfp.tim_dt_b;
+		new = st_mfp.tim_dt_b;
 	} while (old != new);
-	mfp.tim_ct_b = 0x10;
+	st_mfp.tim_ct_b = 0x10;
 	udelay(SYNC_DELAY);
 
 	if (atari_switches & ATARI_SWITCH_OVSC_IKBD)