Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits)
  pxa168_eth: fix race in transmit path.
  ipv4, ping: Remove duplicate icmp.h include
  netxen: fix race in skb->len access
  sgi-xp: fix a use after free
  hp100: fix an skb->len race
  netpoll: copy dev name of slaves to struct netpoll
  ipv4: fix multicast losses
  r8169: fix static initializers.
  inet_diag: fix inet_diag_bc_audit()
  gigaset: call module_put before restart of if_open()
  farsync: add module_put to error path in fst_open()
  net: rfs: enable RFS before first data packet is received
  fs_enet: fix freescale FCC ethernet dp buffer alignment
  netdev: bfin_mac: fix memory leak when freeing dma descriptors
  vlan: don't call ndo_vlan_rx_register on hardware that doesn't have vlan support
  caif: Bugfix - XOFF removed channel from caif-mux
  tun: teach the tun/tap driver to support netpoll
  dp83640: drop PHY status frames in the driver.
  dp83640: fix phy status frame event parsing
  phylib: Allow BCM63XX PHY to be selected only on BCM63XX.
  ...

22 files changed, 490 insertions, 38 deletions

diff --git a/drivers/bluetooth/btmrvl_debugfs.c b/drivers/bluetooth/btmrvl_debugfs.c
index fd6305bf953..8ecf4c6c287 100644
--- a/drivers/bluetooth/btmrvl_debugfs.c
+++ b/drivers/bluetooth/btmrvl_debugfs.c
@@ -64,6 +64,8 @@ static ssize_t btmrvl_hscfgcmd_write(struct file *file,
 		return -EFAULT;
 
 	ret = strict_strtol(buf, 10, &result);
+	if (ret)
+		return ret;
 
 	priv->btmrvl_dev.hscfgcmd = result;
 
@@ -108,6 +110,8 @@ static ssize_t btmrvl_psmode_write(struct file *file, const char __user *ubuf,
 		return -EFAULT;
 
 	ret = strict_strtol(buf, 10, &result);
+	if (ret)
+		return ret;
 
 	priv->btmrvl_dev.psmode = result;
 
@@ -147,6 +151,8 @@ static ssize_t btmrvl_pscmd_write(struct file *file, const char __user *ubuf,
 		return -EFAULT;
 
 	ret = strict_strtol(buf, 10, &result);
+	if (ret)
+		return ret;
 
 	priv->btmrvl_dev.pscmd = result;
 
@@ -191,6 +197,8 @@ static ssize_t btmrvl_gpiogap_write(struct file *file, const char __user *ubuf,
 		return -EFAULT;
 
 	ret = strict_strtol(buf, 16, &result);
+	if (ret)
+		return ret;
 
 	priv->btmrvl_dev.gpio_gap = result;
 
@@ -230,6 +238,8 @@ static ssize_t btmrvl_hscmd_write(struct file *file, const char __user *ubuf,
 		return -EFAULT;
 
 	ret = strict_strtol(buf, 10, &result);
+	if (ret)
+		return ret;
 
 	priv->btmrvl_dev.hscmd = result;
 	if (priv->btmrvl_dev.hscmd) {
@@ -272,6 +282,8 @@ static ssize_t btmrvl_hsmode_write(struct file *file, const char __user *ubuf,
 		return -EFAULT;
 
 	ret = strict_strtol(buf, 10, &result);
+	if (ret)
+		return ret;
 
 	priv->btmrvl_dev.hsmode = result;
 
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index 59de638225f..e35058bcd7b 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -156,8 +156,10 @@ static int if_open(struct tty_struct *tty, struct file *filp)
 	if (!cs || !try_module_get(cs->driver->owner))
 		return -ENODEV;
 
-	if (mutex_lock_interruptible(&cs->mutex))
+	if (mutex_lock_interruptible(&cs->mutex)) {
+		module_put(cs->driver->owner);
 		return -ERESTARTSYS;
+	}
 	tty->driver_data = cs;
 
 	++cs->open_count;
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index ee5109a3cd9..42f067347bc 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -495,14 +495,14 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		}
 	}
 
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += skb->len;
+
 	if (atomic_dec_return(&queued_msg->use_count) == 0) {
 		dev_kfree_skb(skb);
 		kfree(queued_msg);
 	}
 
-	dev->stats.tx_packets++;
-	dev->stats.tx_bytes += skb->len;
-
 	return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c
index d84f6e8903a..5b732988d49 100644
--- a/drivers/net/3c503.c
+++ b/drivers/net/3c503.c
@@ -412,7 +412,7 @@ el2_open(struct net_device *dev)
 		outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR);
 		outb_p(0x00, E33G_IDCFR);
 		msleep(1);
-		free_irq(*irqp, el2_probe_interrupt);
+		free_irq(*irqp, &seen);
 		if (!seen)
 			continue;
 
@@ -422,6 +422,7 @@ el2_open(struct net_device *dev)
 			continue;
 		if (retval < 0)
 			goto err_disable;
+		break;
 	} while (*++irqp);
 
 	if (*irqp == 0) {
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 68d45ba2d9b..6c019e14854 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -52,13 +52,13 @@ MODULE_DESCRIPTION(DRV_DESC);
 MODULE_ALIAS("platform:bfin_mac");
 
 #if defined(CONFIG_BFIN_MAC_USE_L1)
-# define bfin_mac_alloc(dma_handle, size)  l1_data_sram_zalloc(size)
-# define bfin_mac_free(dma_handle, ptr)    l1_data_sram_free(ptr)
+# define bfin_mac_alloc(dma_handle, size, num)  l1_data_sram_zalloc(size*num)
+# define bfin_mac_free(dma_handle, ptr, num)    l1_data_sram_free(ptr)
 #else
-# define bfin_mac_alloc(dma_handle, size) \
-	dma_alloc_coherent(NULL, size, dma_handle, GFP_KERNEL)
-# define bfin_mac_free(dma_handle, ptr) \
-	dma_free_coherent(NULL, sizeof(*ptr), ptr, dma_handle)
+# define bfin_mac_alloc(dma_handle, size, num) \
+	dma_alloc_coherent(NULL, size*num, dma_handle, GFP_KERNEL)
+# define bfin_mac_free(dma_handle, ptr, num) \
+	dma_free_coherent(NULL, sizeof(*ptr)*num, ptr, dma_handle)
 #endif
 
 #define PKT_BUF_SZ 1580
@@ -95,7 +95,7 @@ static void desc_list_free(void)
 				t = t->next;
 			}
 		}
-		bfin_mac_free(dma_handle, tx_desc);
+		bfin_mac_free(dma_handle, tx_desc, CONFIG_BFIN_TX_DESC_NUM);
 	}
 
 	if (rx_desc) {
@@ -109,7 +109,7 @@ static void desc_list_free(void)
 				r = r->next;
 			}
 		}
-		bfin_mac_free(dma_handle, rx_desc);
+		bfin_mac_free(dma_handle, rx_desc, CONFIG_BFIN_RX_DESC_NUM);
 	}
 }
 
@@ -126,13 +126,13 @@ static int desc_list_init(void)
 #endif
 
 	tx_desc = bfin_mac_alloc(&dma_handle,
-				sizeof(struct net_dma_desc_tx) *
+				sizeof(struct net_dma_desc_tx),
 				CONFIG_BFIN_TX_DESC_NUM);
 	if (tx_desc == NULL)
 		goto init_error;
 
 	rx_desc = bfin_mac_alloc(&dma_handle,
-				sizeof(struct net_dma_desc_rx) *
+				sizeof(struct net_dma_desc_rx),
 				CONFIG_BFIN_RX_DESC_NUM);
 	if (rx_desc == NULL)
 		goto init_error;
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 652b30e525d..eafe44a528a 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1297,6 +1297,7 @@ static inline int slave_enable_netpoll(struct slave *slave)
 		goto out;
 
 	np->dev = slave->dev;
+	strlcpy(np->dev_name, slave->dev->name, IFNAMSIZ);
 	err = __netpoll_setup(np);
 	if (err) {
 		kfree(np);
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
index 7a84e45487e..7583a9572bc 100644
--- a/drivers/net/fs_enet/mac-fcc.c
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -105,7 +105,7 @@ static int do_pd_setup(struct fs_enet_private *fep)
 		goto out_ep;
 
 	fep->fcc.mem = (void __iomem *)cpm2_immr;
-	fpi->dpram_offset = cpm_dpalloc(128, 8);
+	fpi->dpram_offset = cpm_dpalloc(128, 32);
 	if (IS_ERR_VALUE(fpi->dpram_offset)) {
 		ret = fpi->dpram_offset;
 		goto out_fcccp;
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 8e10d2f6a5a..c3ecb118c1d 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -1580,12 +1580,12 @@ static netdev_tx_t hp100_start_xmit_bm(struct sk_buff *skb,
 	hp100_outl(ringptr->pdl_paddr, TX_PDA_L);	/* Low Prio. Queue */
 
 	lp->txrcommit++;
-	spin_unlock_irqrestore(&lp->lock, flags);
 
-	/* Update statistics */
 	dev->stats.tx_packets++;
 	dev->stats.tx_bytes += skb->len;
 
+	spin_unlock_irqrestore(&lp->lock, flags);
+
 	return NETDEV_TX_OK;
 
 drop:
diff --git a/drivers/net/hplance.c b/drivers/net/hplance.c
index b6060f7538d..a900d5bf294 100644
--- a/drivers/net/hplance.c
+++ b/drivers/net/hplance.c
@@ -135,7 +135,7 @@ static void __devexit hplance_remove_one(struct dio_dev *d)
 }
 
 /* Initialise a single lance board at the given DIO device */
-static void __init hplance_init(struct net_device *dev, struct dio_dev *d)
+static void __devinit hplance_init(struct net_device *dev, struct dio_dev *d)
 {
         unsigned long va = (d->resource.start + DIO_VIRADDRBASE);
         struct hplance_private *lp;
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index b644383017f..c0788a31ff0 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -1965,11 +1965,11 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 	netxen_tso_check(netdev, tx_ring, first_desc, skb);
 
-	netxen_nic_update_cmd_producer(adapter, tx_ring);
-
 	adapter->stats.txbytes += skb->len;
 	adapter->stats.xmitcalled++;
 
+	netxen_nic_update_cmd_producer(adapter, tx_ring);
+
 	return NETDEV_TX_OK;
 
 drop_packet:
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 392a6c4b72e..a70244306c9 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -58,6 +58,7 @@ config BROADCOM_PHY
 
 config BCM63XX_PHY
 	tristate "Drivers for Broadcom 63xx SOCs internal PHY"
+	depends on BCM63XX
 	---help---
 	  Currently supports the 6348 and 6358 PHYs.
 
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index b0c9522bb53..2cd8dc5847b 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -543,11 +543,20 @@ static void recalibrate(struct dp83640_clock *clock)
 
 /* time stamping methods */
 
-static void decode_evnt(struct dp83640_private *dp83640,
-			struct phy_txts *phy_txts, u16 ests)
+static int decode_evnt(struct dp83640_private *dp83640,
+		       void *data, u16 ests)
 {
+	struct phy_txts *phy_txts;
 	struct ptp_clock_event event;
 	int words = (ests >> EVNT_TS_LEN_SHIFT) & EVNT_TS_LEN_MASK;
+	u16 ext_status = 0;
+
+	if (ests & MULT_EVNT) {
+		ext_status = *(u16 *) data;
+		data += sizeof(ext_status);
+	}
+
+	phy_txts = data;
 
 	switch (words) { /* fall through in every case */
 	case 3:
@@ -565,6 +574,9 @@ static void decode_evnt(struct dp83640_private *dp83640,
 	event.timestamp = phy2txts(&dp83640->edata);
 
 	ptp_clock_event(dp83640->clock->ptp_clock, &event);
+
+	words = ext_status ? words + 2 : words + 1;
+	return words * sizeof(u16);
 }
 
 static void decode_rxts(struct dp83640_private *dp83640,
@@ -643,9 +655,7 @@ static void decode_status_frame(struct dp83640_private *dp83640,
 
 		} else if (PSF_EVNT == type && len >= sizeof(*phy_txts)) {
 
-			phy_txts = (struct phy_txts *) ptr;
-			decode_evnt(dp83640, phy_txts, ests);
-			size = sizeof(*phy_txts);
+			size = decode_evnt(dp83640, ptr, ests);
 
 		} else {
 			size = 0;
@@ -1034,8 +1044,8 @@ static bool dp83640_rxtstamp(struct phy_device *phydev,
 
 	if (is_status_frame(skb, type)) {
 		decode_status_frame(dp83640, skb);
-		/* Let the stack drop this frame. */
-		return false;
+		kfree_skb(skb);
+		return true;
 	}
 
 	SKB_PTP_TYPE(skb) = type;
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index a1b82c9c67d..c554a397e55 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -523,7 +523,7 @@ static void ppp_async_process(unsigned long arg)
 #define PUT_BYTE(ap, buf, c, islcp)	do {		\
 	if ((islcp && c < 0x20) || (ap->xaccm[c >> 5] & (1 << (c & 0x1f)))) {\
 		*buf++ = PPP_ESCAPE;			\
-		*buf++ = c ^ 0x20;			\
+		*buf++ = c ^ PPP_TRANS;			\
 	} else						\
 		*buf++ = c;				\
 } while (0)
@@ -896,7 +896,7 @@ ppp_async_input(struct asyncppp *ap, const unsigned char *buf,
 				sp = skb_put(skb, n);
 				memcpy(sp, buf, n);
 				if (ap->state & SC_ESCAPE) {
-					sp[0] ^= 0x20;
+					sp[0] ^= PPP_TRANS;
 					ap->state &= ~SC_ESCAPE;
 				}
 			}
diff --git a/drivers/net/pxa168_eth.c b/drivers/net/pxa168_eth.c
index 89f7540d90f..5f597ca592b 100644
--- a/drivers/net/pxa168_eth.c
+++ b/drivers/net/pxa168_eth.c
@@ -1273,7 +1273,7 @@ static int pxa168_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	wmb();
 	wrl(pep, SDMA_CMD, SDMA_CMD_TXDH | SDMA_CMD_ERD);
 
-	stats->tx_bytes += skb->len;
+	stats->tx_bytes += length;
 	stats->tx_packets++;
 	dev->trans_start = jiffies;
 	if (pep->tx_ring_size - pep->tx_desc_count <= 1) {
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index ef1ce2ebeb4..05d81780d1f 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1621,7 +1621,7 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp,
 	 *
 	 * (RTL_R32(TxConfig) & 0x700000) == 0x200000 ? 8101Eb : 8101Ec
 	 */
-	static const struct {
+	static const struct rtl_mac_info {
 		u32 mask;
 		u32 val;
 		int mac_version;
@@ -1689,7 +1689,8 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp,
 
 		/* Catch-all */
 		{ 0x00000000, 0x00000000,	RTL_GIGA_MAC_NONE   }
-	}, *p = mac_info;
+	};
+	const struct rtl_mac_info *p = mac_info;
 	u32 reg;
 
 	reg = RTL_R32(TxConfig);
@@ -3681,7 +3682,7 @@ static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz)
 
 static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
 {
-	static const struct {
+	static const struct rtl_cfg2_info {
 		u32 mac_version;
 		u32 clk;
 		u32 val;
@@ -3690,7 +3691,8 @@ static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
 		{ RTL_GIGA_MAC_VER_05, PCI_Clock_66MHz, 0x000fffff },
 		{ RTL_GIGA_MAC_VER_06, PCI_Clock_33MHz, 0x00ffff00 }, // 8110SCe
 		{ RTL_GIGA_MAC_VER_06, PCI_Clock_66MHz, 0x00ffffff }
-	}, *p = cfg2_info;
+	};
+	const struct rtl_cfg2_info *p = cfg2_info;
 	unsigned int i;
 	u32 clk;
 
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 74e94054ab1..5235f48be1b 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -460,7 +460,23 @@ static u32 tun_net_fix_features(struct net_device *dev, u32 features)
 
 	return (features & tun->set_features) | (features & ~TUN_USER_FEATURES);
 }
-
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void tun_poll_controller(struct net_device *dev)
+{
+	/*
+	 * Tun only receives frames when:
+	 * 1) the char device endpoint gets data from user space
+	 * 2) the tun socket gets a sendmsg call from user space
+	 * Since both of those are syncronous operations, we are guaranteed
+	 * never to have pending data when we poll for it
+	 * so theres nothing to do here but return.
+	 * We need this though so netpoll recognizes us as an interface that
+	 * supports polling, which enables bridge devices in virt setups to
+	 * still use netconsole
+	 */
+	return;
+}
+#endif
 static const struct net_device_ops tun_netdev_ops = {
 	.ndo_uninit		= tun_net_uninit,
 	.ndo_open		= tun_net_open,
@@ -468,6 +484,9 @@ static const struct net_device_ops tun_netdev_ops = {
 	.ndo_start_xmit		= tun_net_xmit,
 	.ndo_change_mtu		= tun_net_change_mtu,
 	.ndo_fix_features	= tun_net_fix_features,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= tun_poll_controller,
+#endif
 };
 
 static const struct net_device_ops tap_netdev_ops = {
@@ -480,6 +499,9 @@ static const struct net_device_ops tap_netdev_ops = {
 	.ndo_set_multicast_list	= tun_net_mclist,
 	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= tun_poll_controller,
+#endif
 };
 
 /* Initialize net device. */
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 9d4f9117260..84d4608153c 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -385,6 +385,16 @@ config USB_NET_CX82310_ETH
 	  router with USB ethernet port. This driver is for routers only,
 	  it will not work with ADSL modems (use cxacru driver instead).
 
+config USB_NET_KALMIA
+	tristate "Samsung Kalmia based LTE USB modem"
+	depends on USB_USBNET
+	help
+	  Choose this option if you have a Samsung Kalmia based USB modem
+	  as Samsung GT-B3730.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called kalmia.
+
 config USB_HSO
 	tristate "Option USB High Speed Mobile Devices"
 	depends on USB && RFKILL
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index c7ec8a5f0a9..c203fa21f6b 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_USB_NET_MCS7830)	+= mcs7830.o
 obj-$(CONFIG_USB_USBNET)	+= usbnet.o
 obj-$(CONFIG_USB_NET_INT51X1)	+= int51x1.o
 obj-$(CONFIG_USB_CDC_PHONET)	+= cdc-phonet.o
+obj-$(CONFIG_USB_NET_KALMIA)	+= kalmia.o
 obj-$(CONFIG_USB_IPHETH)	+= ipheth.o
 obj-$(CONFIG_USB_SIERRA_NET)	+= sierra_net.o
 obj-$(CONFIG_USB_NET_CX82310_ETH)	+= cx82310_eth.o
diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c
new file mode 100644
index 00000000000..d965fb1e013
--- /dev/null
+++ b/drivers/net/usb/kalmia.c
@@ -0,0 +1,384 @@
+/*
+ * USB network interface driver for Samsung Kalmia based LTE USB modem like the
+ * Samsung GT-B3730 and GT-B3710.
+ *
+ * Copyright (C) 2011 Marius Bjoernstad Kotsbak <marius@kotsbak.com>
+ *
+ * Sponsored by Quicklink Video Distribution Services Ltd.
+ *
+ * Based on the cdc_eem module.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/gfp.h>
+
+/*
+ * The Samsung Kalmia based LTE USB modems have a CDC ACM port for modem control
+ * handled by the "option" module and an ethernet data port handled by this
+ * module.
+ *
+ * The stick must first be switched into modem mode by usb_modeswitch
+ * or similar tool. Then the modem gets sent two initialization packets by
+ * this module, which gives the MAC address of the device. User space can then
+ * connect the modem using AT commands through the ACM port and then use
+ * DHCP on the network interface exposed by this module. Network packets are
+ * sent to and from the modem in a proprietary format discovered after watching
+ * the behavior of the windows driver for the modem.
+ *
+ * More information about the use of the modem is available in usb_modeswitch
+ * forum and the project page:
+ *
+ * http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465
+ * https://github.com/mkotsbak/Samsung-GT-B3730-linux-driver
+ */
+
+/* #define	DEBUG */
+/* #define	VERBOSE */
+
+#define KALMIA_HEADER_LENGTH 6
+#define KALMIA_ALIGN_SIZE 4
+#define KALMIA_USB_TIMEOUT 10000
+
+/*-------------------------------------------------------------------------*/
+
+static int
+kalmia_send_init_packet(struct usbnet *dev, u8 *init_msg, u8 init_msg_len,
+	u8 *buffer, u8 expected_len)
+{
+	int act_len;
+	int status;
+
+	netdev_dbg(dev->net, "Sending init packet");
+
+	status = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 0x02),
+		init_msg, init_msg_len, &act_len, KALMIA_USB_TIMEOUT);
+	if (status != 0) {
+		netdev_err(dev->net,
+			"Error sending init packet. Status %i, length %i\n",
+			status, act_len);
+		return status;
+	}
+	else if (act_len != init_msg_len) {
+		netdev_err(dev->net,
+			"Did not send all of init packet. Bytes sent: %i",
+			act_len);
+	}
+	else {
+		netdev_dbg(dev->net, "Successfully sent init packet.");
+	}
+
+	status = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, 0x81),
+		buffer, expected_len, &act_len, KALMIA_USB_TIMEOUT);
+
+	if (status != 0)
+		netdev_err(dev->net,
+			"Error receiving init result. Status %i, length %i\n",
+			status, act_len);
+	else if (act_len != expected_len)
+		netdev_err(dev->net, "Unexpected init result length: %i\n",
+			act_len);
+
+	return status;
+}
+
+static int
+kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr)
+{
+	char init_msg_1[] =
+		{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00,
+		0x00, 0x00 };
+	char init_msg_2[] =
+		{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4,
+		0x00, 0x00 };
+	char receive_buf[28];
+	int status;
+
+	status = kalmia_send_init_packet(dev, init_msg_1, sizeof(init_msg_1)
+		/ sizeof(init_msg_1[0]), receive_buf, 24);
+	if (status != 0)
+		return status;
+
+	status = kalmia_send_init_packet(dev, init_msg_2, sizeof(init_msg_2)
+		/ sizeof(init_msg_2[0]), receive_buf, 28);
+	if (status != 0)
+		return status;
+
+	memcpy(ethernet_addr, receive_buf + 10, ETH_ALEN);
+
+	return status;
+}
+
+static int
+kalmia_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	u8 status;
+	u8 ethernet_addr[ETH_ALEN];
+
+	/* Don't bind to AT command interface */
+	if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
+		return -EINVAL;
+
+	dev->in = usb_rcvbulkpipe(dev->udev, 0x81 & USB_ENDPOINT_NUMBER_MASK);
+	dev->out = usb_sndbulkpipe(dev->udev, 0x02 & USB_ENDPOINT_NUMBER_MASK);
+	dev->status = NULL;
+
+	dev->net->hard_header_len += KALMIA_HEADER_LENGTH;
+	dev->hard_mtu = 1400;
+	dev->rx_urb_size = dev->hard_mtu * 10; // Found as optimal after testing
+
+	status = kalmia_init_and_get_ethernet_addr(dev, ethernet_addr);
+
+	if (status < 0) {
+		usb_set_intfdata(intf, NULL);
+		usb_driver_release_interface(driver_of(intf), intf);
+		return status;
+	}
+
+	memcpy(dev->net->dev_addr, ethernet_addr, ETH_ALEN);
+	memcpy(dev->net->perm_addr, ethernet_addr, ETH_ALEN);
+
+	return status;
+}
+
+static struct sk_buff *
+kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	struct sk_buff *skb2 = NULL;
+	u16 content_len;
+	unsigned char *header_start;
+	unsigned char ether_type_1, ether_type_2;
+	u8 remainder, padlen = 0;
+
+	if (!skb_cloned(skb)) {
+		int headroom = skb_headroom(skb);
+		int tailroom = skb_tailroom(skb);
+
+		if ((tailroom >= KALMIA_ALIGN_SIZE) && (headroom
+			>= KALMIA_HEADER_LENGTH))
+			goto done;
+
+		if ((headroom + tailroom) > (KALMIA_HEADER_LENGTH
+			+ KALMIA_ALIGN_SIZE)) {
+			skb->data = memmove(skb->head + KALMIA_HEADER_LENGTH,
+				skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+			goto done;
+		}
+	}
+
+	skb2 = skb_copy_expand(skb, KALMIA_HEADER_LENGTH,
+		KALMIA_ALIGN_SIZE, flags);
+	if (!skb2)
+		return NULL;
+
+	dev_kfree_skb_any(skb);
+	skb = skb2;
+
+	done: header_start = skb_push(skb, KALMIA_HEADER_LENGTH);
+	ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12];
+	ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13];
+
+	netdev_dbg(dev->net, "Sending etherType: %02x%02x", ether_type_1,
+		ether_type_2);
+
+	/* According to empiric data for data packages */
+	header_start[0] = 0x57;
+	header_start[1] = 0x44;
+	content_len = skb->len - KALMIA_HEADER_LENGTH;
+	header_start[2] = (content_len & 0xff); /* low byte */
+	header_start[3] = (content_len >> 8); /* high byte */
+
+	header_start[4] = ether_type_1;
+	header_start[5] = ether_type_2;
+
+	/* Align to 4 bytes by padding with zeros */
+	remainder = skb->len % KALMIA_ALIGN_SIZE;
+	if (remainder > 0) {
+		padlen = KALMIA_ALIGN_SIZE - remainder;
+		memset(skb_put(skb, padlen), 0, padlen);
+	}
+
+	netdev_dbg(
+		dev->net,
+		"Sending package with length %i and padding %i. Header: %02x:%02x:%02x:%02x:%02x:%02x.",
+		content_len, padlen, header_start[0], header_start[1],
+		header_start[2], header_start[3], header_start[4],
+		header_start[5]);
+
+	return skb;
+}
+
+static int
+kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	/*
+	 * Our task here is to strip off framing, leaving skb with one
+	 * data frame for the usbnet framework code to process.
+	 */
+	const u8 HEADER_END_OF_USB_PACKET[] =
+		{ 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 };
+	const u8 EXPECTED_UNKNOWN_HEADER_1[] =
+		{ 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 };
+	const u8 EXPECTED_UNKNOWN_HEADER_2[] =
+		{ 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 };
+	u8 i = 0;
+
+	/* incomplete header? */
+	if (skb->len < KALMIA_HEADER_LENGTH)
+		return 0;
+
+	do {
+		struct sk_buff *skb2 = NULL;
+		u8 *header_start;
+		u16 usb_packet_length, ether_packet_length;
+		int is_last;
+
+		header_start = skb->data;
+
+		if (unlikely(header_start[0] != 0x57 || header_start[1] != 0x44)) {
+			if (!memcmp(header_start, EXPECTED_UNKNOWN_HEADER_1,
+				sizeof(EXPECTED_UNKNOWN_HEADER_1)) || !memcmp(
+				header_start, EXPECTED_UNKNOWN_HEADER_2,
+				sizeof(EXPECTED_UNKNOWN_HEADER_2))) {
+				netdev_dbg(
+					dev->net,
+					"Received expected unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
+					header_start[0], header_start[1],
+					header_start[2], header_start[3],
+					header_start[4], header_start[5],
+					skb->len - KALMIA_HEADER_LENGTH);
+			}
+			else {
+				netdev_err(
+					dev->net,
+					"Received unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
+					header_start[0], header_start[1],
+					header_start[2], header_start[3],
+					header_start[4], header_start[5],
+					skb->len - KALMIA_HEADER_LENGTH);
+				return 0;
+			}
+		}
+		else
+			netdev_dbg(
+				dev->net,
+				"Received header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
+				header_start[0], header_start[1], header_start[2],
+				header_start[3], header_start[4], header_start[5],
+				skb->len - KALMIA_HEADER_LENGTH);
+
+		/* subtract start header and end header */
+		usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH);
+		ether_packet_length = header_start[2] + (header_start[3] << 8);
+		skb_pull(skb, KALMIA_HEADER_LENGTH);
+
+		/* Some small packets misses end marker */
+		if (usb_packet_length < ether_packet_length) {
+			ether_packet_length = usb_packet_length
+				+ KALMIA_HEADER_LENGTH;
+			is_last = true;
+		}
+		else {
+			netdev_dbg(dev->net, "Correct package length #%i", i
+				+ 1);
+
+			is_last = (memcmp(skb->data + ether_packet_length,
+				HEADER_END_OF_USB_PACKET,
+				sizeof(HEADER_END_OF_USB_PACKET)) == 0);
+			if (!is_last) {
+				header_start = skb->data + ether_packet_length;
+				netdev_dbg(
+					dev->net,
+					"End header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
+					header_start[0], header_start[1],
+					header_start[2], header_start[3],
+					header_start[4], header_start[5],
+					skb->len - KALMIA_HEADER_LENGTH);
+			}
+		}
+
+		if (is_last) {
+			skb2 = skb;
+		}
+		else {
+			skb2 = skb_clone(skb, GFP_ATOMIC);
+			if (unlikely(!skb2))
+				return 0;
+		}
+
+		skb_trim(skb2, ether_packet_length);
+
+		if (is_last) {
+			return 1;
+		}
+		else {
+			usbnet_skb_return(dev, skb2);
+			skb_pull(skb, ether_packet_length);
+		}
+
+		i++;
+	}
+	while (skb->len);
+
+	return 1;
+}
+
+static const struct driver_info kalmia_info = {
+	.description = "Samsung Kalmia LTE USB dongle",
+	.flags = FLAG_WWAN,
+	.bind = kalmia_bind,
+	.rx_fixup = kalmia_rx_fixup,
+	.tx_fixup = kalmia_tx_fixup
+};
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id products[] = {
+	/* The unswitched USB ID, to get the module auto loaded: */
+	{ USB_DEVICE(0x04e8, 0x689a) },
+	/* The stick swithed into modem (by e.g. usb_modeswitch): */
+	{ USB_DEVICE(0x04e8, 0x6889),
+		.driver_info = (unsigned long) &kalmia_info, },
+	{ /* EMPTY == end of list */} };
+MODULE_DEVICE_TABLE( usb, products);
+
+static struct usb_driver kalmia_driver = {
+	.name = "kalmia",
+	.id_table = products,
+	.probe = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend = usbnet_suspend,
+	.resume = usbnet_resume
+};
+
+static int __init kalmia_init(void)
+{
+	return usb_register(&kalmia_driver);
+}
+module_init( kalmia_init);
+
+static void __exit kalmia_exit(void)
+{
+	usb_deregister(&kalmia_driver);
+}
+module_exit( kalmia_exit);
+
+MODULE_AUTHOR("Marius Bjoernstad Kotsbak <marius@kotsbak.com>");
+MODULE_DESCRIPTION("Samsung Kalmia USB network driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index e050bd65e03..777d1a4e81b 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -2203,8 +2203,10 @@ fst_open(struct net_device *dev)
 
 	if (port->mode != FST_RAW) {
 		err = hdlc_open(dev);
-		if (err)
+		if (err) {
+			module_put(THIS_MODULE);
 			return err;
+		}
 	}
 
 	fst_openport(port);
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 660831ce293..687c1f22349 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1288,6 +1288,8 @@ int mwifiex_register_cfg80211(struct net_device *dev, u8 *mac,
 
 	*(unsigned long *) wdev_priv = (unsigned long) priv;
 
+	set_wiphy_dev(wdev->wiphy, (struct device *) priv->adapter->dev);
+
 	ret = wiphy_register(wdev->wiphy);
 	if (ret < 0) {
 		dev_err(priv->adapter->dev, "%s: registering cfg80211 device\n",
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 32261189bce..aeac3cc4dbe 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2474,6 +2474,7 @@ struct mwl8k_cmd_set_hw_spec {
  * faster client.
  */
 #define MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY	0x00000400
+#define MWL8K_SET_HW_SPEC_FLAG_GENERATE_CCMP_HDR	0x00000200
 #define MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT		0x00000080
 #define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP	0x00000020
 #define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON		0x00000010
@@ -2510,7 +2511,8 @@ static int mwl8k_cmd_set_hw_spec(struct ieee80211_hw *hw)
 	cmd->flags = cpu_to_le32(MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT |
 				 MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP |
 				 MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON |
-				 MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY);
+				 MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY |
+				 MWL8K_SET_HW_SPEC_FLAG_GENERATE_CCMP_HDR);
 	cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS);
 	cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS);