[media] cx18: Add support for Hauppauge HVR-1600 models with s5h1411

The newest variants of the HVR-1600 have an s5h1411/tda18271 for the digital
frontend.  Add support for these boards.

Thanks to Hauppauge Computer Works for providing sample hardware.

[awalls@md.metrocast.net: Changed an additional log message to clarify for
the end user that the driver is defaulting to an original HVR-1600 for
unknown model numbers.]

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

4 files changed, 112 insertions, 4 deletions

diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 87177733cf9..68ad1963f42 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -95,6 +95,53 @@ static const struct cx18_card cx18_card_hvr1600_esmt = {
 	.i2c = &cx18_i2c_std,
 };
 
+static const struct cx18_card cx18_card_hvr1600_s5h1411 = {
+	.type = CX18_CARD_HVR_1600_S5H1411,
+	.name = "Hauppauge HVR-1600",
+	.comment = "Simultaneous Digital and Analog TV capture supported\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_muxer = CX18_HW_CS5345,
+	.hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
+		  CX18_HW_CS5345 | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL |
+		  CX18_HW_Z8F0811_IR_HAUP,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE7 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1, CX18_AV_SVIDEO1    },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
+		{ CX18_CARD_INPUT_SVIDEO2,    2, CX18_AV_SVIDEO2    },
+		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER,
+		  CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
+		{ CX18_CARD_INPUT_LINE_IN1,
+		  CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 },
+		{ CX18_CARD_INPUT_LINE_IN2,
+		  CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 },
+	},
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
+			 CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 },
+	.ddr = {
+		/* ESMT M13S128324A-5B memory */
+		.chip_config = 0x003,
+		.refresh = 0x30c,
+		.timing1 = 0x44220e82,
+		.timing2 = 0x08,
+		.tune_lane = 0,
+		.initial_emrs = 0,
+	},
+	.gpio_init.initial_value = 0x3001,
+	.gpio_init.direction = 0x3001,
+	.gpio_i2c_slave_reset = {
+		.active_lo_mask = 0x3001,
+		.msecs_asserted = 10,
+		.msecs_recovery = 40,
+		.ir_reset_mask  = 0x0001,
+	},
+	.i2c = &cx18_i2c_std,
+};
+
 static const struct cx18_card cx18_card_hvr1600_samsung = {
 	.type = CX18_CARD_HVR_1600_SAMSUNG,
 	.name = "Hauppauge HVR-1600 (Preproduction)",
@@ -523,7 +570,8 @@ static const struct cx18_card *cx18_card_list[] = {
 	&cx18_card_toshiba_qosmio_dvbt,
 	&cx18_card_leadtek_pvr2100,
 	&cx18_card_leadtek_dvr3100h,
-	&cx18_card_gotview_dvd3
+	&cx18_card_gotview_dvd3,
+	&cx18_card_hvr1600_s5h1411
 };
 
 const struct cx18_card *cx18_get_card(u16 index)
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 944af8adbe0..b1c3cbd9274 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -157,6 +157,7 @@ MODULE_PARM_DESC(cardtype,
 		 "\t\t\t 7 = Leadtek WinFast PVR2100\n"
 		 "\t\t\t 8 = Leadtek WinFast DVR3100 H\n"
 		 "\t\t\t 9 = GoTView PCI DVD3 Hybrid\n"
+		 "\t\t\t 10 = Hauppauge HVR 1600 (S5H1411)\n"
 		 "\t\t\t 0 = Autodetect (default)\n"
 		 "\t\t\t-1 = Ignore this card\n\t\t");
 MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60");
@@ -337,6 +338,7 @@ void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv)
 	switch (cx->card->type) {
 	case CX18_CARD_HVR_1600_ESMT:
 	case CX18_CARD_HVR_1600_SAMSUNG:
+	case CX18_CARD_HVR_1600_S5H1411:
 		tveeprom_hauppauge_analog(&c, tv, eedata);
 		break;
 	case CX18_CARD_YUAN_MPC718:
@@ -365,7 +367,25 @@ static void cx18_process_eeprom(struct cx18 *cx)
 	   from the model number. Use the cardtype module option if you
 	   have one of these preproduction models. */
 	switch (tv.model) {
-	case 74000 ... 74999:
+	case 74301: /* Retail models */
+	case 74321:
+	case 74351: /* OEM models */
+	case 74361:
+		/* Digital side is s5h1411/tda18271 */
+		cx->card = cx18_get_card(CX18_CARD_HVR_1600_S5H1411);
+		break;
+	case 74021: /* Retail models */
+	case 74031:
+	case 74041:
+	case 74141:
+	case 74541: /* OEM models */
+	case 74551:
+	case 74591:
+	case 74651:
+	case 74691:
+	case 74751:
+	case 74891:
+		/* Digital side is s5h1409/mxl5005s */
 		cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT);
 		break;
 	case 0x718:
@@ -377,7 +397,8 @@ static void cx18_process_eeprom(struct cx18 *cx)
 		CX18_ERR("Invalid EEPROM\n");
 		return;
 	default:
-		CX18_ERR("Unknown model %d, defaulting to HVR-1600\n", tv.model);
+		CX18_ERR("Unknown model %d, defaulting to original HVR-1600 "
+			 "(cardtype=1)\n", tv.model);
 		cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT);
 		break;
 	}
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index 306caac6d3f..f736679d251 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -85,7 +85,8 @@
 #define CX18_CARD_LEADTEK_PVR2100     6 /* Leadtek WinFast PVR2100 */
 #define CX18_CARD_LEADTEK_DVR3100H    7 /* Leadtek WinFast DVR3100 H */
 #define CX18_CARD_GOTVIEW_PCI_DVD3    8 /* GoTView PCI DVD3 Hybrid */
-#define CX18_CARD_LAST		      8
+#define CX18_CARD_HVR_1600_S5H1411    9 /* Hauppauge HVR 1600 s5h1411/tda18271*/
+#define CX18_CARD_LAST		      9
 
 #define CX18_ENC_STREAM_TYPE_MPG  0
 #define CX18_ENC_STREAM_TYPE_TS   1
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index f0381d62518..f41922bd402 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -29,6 +29,8 @@
 #include "cx18-gpio.h"
 #include "s5h1409.h"
 #include "mxl5005s.h"
+#include "s5h1411.h"
+#include "tda18271.h"
 #include "zl10353.h"
 
 #include <linux/firmware.h>
@@ -77,6 +79,32 @@ static struct s5h1409_config hauppauge_hvr1600_config = {
 };
 
 /*
+ * CX18_CARD_HVR_1600_S5H1411
+ */
+static struct s5h1411_config hcw_s5h1411_config = {
+	.output_mode   = S5H1411_SERIAL_OUTPUT,
+	.gpio          = S5H1411_GPIO_OFF,
+	.vsb_if        = S5H1411_IF_44000,
+	.qam_if        = S5H1411_IF_4000,
+	.inversion     = S5H1411_INVERSION_ON,
+	.status_mode   = S5H1411_DEMODLOCKING,
+	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+static struct tda18271_std_map hauppauge_tda18271_std_map = {
+	.atsc_6   = { .if_freq = 5380, .agc_mode = 3, .std = 3,
+		      .if_lvl = 6, .rfagc_top = 0x37 },
+	.qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 0,
+		      .if_lvl = 6, .rfagc_top = 0x37 },
+};
+
+static struct tda18271_config hauppauge_tda18271_config = {
+	.std_map = &hauppauge_tda18271_std_map,
+	.gate    = TDA18271_GATE_DIGITAL,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+/*
  * CX18_CARD_LEADTEK_DVR3100H
  */
 /* Information/confirmation of proper config values provided by Terry Wu */
@@ -244,6 +272,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
 	switch (cx->card->type) {
 	case CX18_CARD_HVR_1600_ESMT:
 	case CX18_CARD_HVR_1600_SAMSUNG:
+	case CX18_CARD_HVR_1600_S5H1411:
 		v = cx18_read_reg(cx, CX18_REG_DMUX_NUM_PORT_0_CONTROL);
 		v |= 0x00400000; /* Serial Mode */
 		v |= 0x00002000; /* Data Length - Byte */
@@ -455,6 +484,15 @@ static int dvb_register(struct cx18_stream *stream)
 			ret = 0;
 		}
 		break;
+	case CX18_CARD_HVR_1600_S5H1411:
+		dvb->fe = dvb_attach(s5h1411_attach,
+				     &hcw_s5h1411_config,
+				     &cx->i2c_adap[0]);
+		if (dvb->fe != NULL)
+			dvb_attach(tda18271_attach, dvb->fe,
+				   0x60, &cx->i2c_adap[0],
+				   &hauppauge_tda18271_config);
+		break;
 	case CX18_CARD_LEADTEK_DVR3100H:
 		dvb->fe = dvb_attach(zl10353_attach,
 				     &leadtek_dvr3100h_demod,