md/raid1,raid10: always abort recover on write error.

Currently we don't abort recovery on a write error if the write error
to the recovering device was triggerd by normal IO (as opposed to
recovery IO).

This means that for one bitmap region, the recovery might write to the
recovering device for a few sectors, then not bother for subsequent
sectors (as it never writes to failed devices).  In this case
the bitmap bit will be cleared, but it really shouldn't.

The result is that if the recovering device fails and is then re-added
(after fixing whatever hardware problem triggerred the failure),
the second recovery won't redo the region it was in the middle of,
so some of the device will not be recovered properly.

If we abort the recovery, the region being processes will be cancelled
(bit not cleared) and the whole region will be retried.

As the bug can result in data corruption the patch is suitable for
-stable.  For kernels prior to 3.11 there is a conflict in raid10.c
which will require care.

Original-from: jiao hui <jiaohui@bwstor.com.cn>
Reported-and-tested-by: jiao hui <jiaohui@bwstor.com.cn>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@vger.kernel.org

2 files changed, 9 insertions, 10 deletions

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 56e24c072b6..d7690f86fdb 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1501,12 +1501,12 @@ static void error(struct mddev *mddev, struct md_rdev *rdev)
 		mddev->degraded++;
 		set_bit(Faulty, &rdev->flags);
 		spin_unlock_irqrestore(&conf->device_lock, flags);
-		/*
-		 * if recovery is running, make sure it aborts.
-		 */
-		set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 	} else
 		set_bit(Faulty, &rdev->flags);
+	/*
+	 * if recovery is running, make sure it aborts.
+	 */
+	set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 	set_bit(MD_CHANGE_DEVS, &mddev->flags);
 	printk(KERN_ALERT
 	       "md/raid1:%s: Disk failure on %s, disabling device.\n"
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index cb882aae9e2..b08c1887132 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1684,13 +1684,12 @@ static void error(struct mddev *mddev, struct md_rdev *rdev)
 		spin_unlock_irqrestore(&conf->device_lock, flags);
 		return;
 	}
-	if (test_and_clear_bit(In_sync, &rdev->flags)) {
+	if (test_and_clear_bit(In_sync, &rdev->flags))
 		mddev->degraded++;
-			/*
-		 * if recovery is running, make sure it aborts.
-		 */
-		set_bit(MD_RECOVERY_INTR, &mddev->recovery);
-	}
+	/*
+	 * If recovery is running, make sure it aborts.
+	 */
+	set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 	set_bit(Blocked, &rdev->flags);
 	set_bit(Faulty, &rdev->flags);
 	set_bit(MD_CHANGE_DEVS, &mddev->flags);