Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull "trivial tree" updates from Jiri Kosina:
 "Usual pile from trivial tree everyone is so eagerly waiting for"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  Remove MN10300_PROC_MN2WS0038
  mei: fix comments
  treewide: Fix typos in Kconfig
  kprobes: update jprobe_example.c for do_fork() change
  Documentation: change "&" to "and" in Documentation/applying-patches.txt
  Documentation: remove obsolete pcmcia-cs from Changes
  Documentation: update links in Changes
  Documentation: Docbook: Fix generated DocBook/kernel-api.xml
  score: Remove GENERIC_HAS_IOMAP
  gpio: fix 'CONFIG_GPIO_IRQCHIP' comments
  tty: doc: Fix grammar in serial/tty
  dma-debug: modify check_for_stack output
  treewide: fix errors in printk
  genirq: fix reference in devm_request_threaded_irq comment
  treewide: fix synchronize_rcu() in comments
  checkstack.pl: port to AArch64
  doc: queue-sysfs: minor fixes
  init/do_mounts: better syntax description
  MIPS: fix comment spelling
  powerpc/simpleboot: fix comment
  ...

29 files changed, 34 insertions, 34 deletions

diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c
index 719cb1bc164..3b7c9f1be48 100644
--- a/drivers/block/paride/pcd.c
+++ b/drivers/block/paride/pcd.c
@@ -69,8 +69,8 @@
             nice        This parameter controls the driver's use of
                         idle CPU time, at the expense of some speed.
  
-	If this driver is built into the kernel, you can use kernel
-        the following command line parameters, with the same values
+	If this driver is built into the kernel, you can use the
+        following kernel command line parameters, with the same values
         as the corresponding module parameters listed above:
 
 	    pcd.drive0
diff --git a/drivers/crypto/qat/qat_common/adf_ctl_drv.c b/drivers/crypto/qat/qat_common/adf_ctl_drv.c
index d97069b8a8e..6a92284a86b 100644
--- a/drivers/crypto/qat/qat_common/adf_ctl_drv.c
+++ b/drivers/crypto/qat/qat_common/adf_ctl_drv.c
@@ -436,7 +436,7 @@ static long adf_ctl_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
 		ret = adf_ctl_ioctl_get_status(fp, cmd, arg);
 		break;
 	default:
-		pr_err("QAT: Invalid ioclt\n");
+		pr_err("QAT: Invalid ioctl\n");
 		ret = -EFAULT;
 		break;
 	}
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index eee79e1c322..afcc8dd40bd 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -946,7 +946,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
 		DRM_DEBUG_KMS("Analog port %c is also DP or TMDS compatible\n",
 			      port_name(port));
 	if (is_dvi && (port == PORT_A || port == PORT_E))
-		DRM_DEBUG_KMS("Port %c is TMDS compabile\n", port_name(port));
+		DRM_DEBUG_KMS("Port %c is TMDS compatible\n", port_name(port));
 	if (!is_dvi && !is_dp && !is_crt)
 		DRM_DEBUG_KMS("Port %c is not DP/TMDS/CRT compatible\n",
 			      port_name(port));
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2ac87fa3058..2e45ae3796f 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -357,7 +357,7 @@ config I2C_BCM_KONA
 	  If you say yes to this option, support will be included for the
 	  I2C interface on the Broadcom Kona family of processors.
 
-	  If you do not need KONA I2C inteface, say N.
+	  If you do not need KONA I2C interface, say N.
 
 config I2C_BLACKFIN_TWI
 	tristate "Blackfin TWI I2C support"
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index e086fb075f2..e3b0337faeb 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -244,7 +244,7 @@ static bool is_ack(struct s3c24xx_i2c *i2c)
 		}
 		usleep_range(1000, 2000);
 	}
-	dev_err(i2c->dev, "ack was not recieved\n");
+	dev_err(i2c->dev, "ack was not received\n");
 	return false;
 }
 
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
index 8f5f2577f28..e8b8569788c 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c
@@ -1870,7 +1870,7 @@ static int ocrdma_build_inline_sges(struct ocrdma_qp *qp,
 		hdr->total_len = ocrdma_sglist_len(wr->sg_list, wr->num_sge);
 		if (unlikely(hdr->total_len > qp->max_inline_data)) {
 			pr_err("%s() supported_len=0x%x,\n"
-			       " unspported len req=0x%x\n", __func__,
+			       " unsupported len req=0x%x\n", __func__,
 				qp->max_inline_data, hdr->total_len);
 			return -EINVAL;
 		}
diff --git a/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c b/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c
index f8dfd76be89..db3588df354 100644
--- a/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c
+++ b/drivers/infiniband/hw/usnic/usnic_ib_qp_grp.c
@@ -511,7 +511,7 @@ int usnic_ib_qp_grp_modify(struct usnic_ib_qp_grp *qp_grp,
 		usnic_ib_qp_grp_state_to_string(old_state),
 		usnic_ib_qp_grp_state_to_string(new_state));
 	} else {
-		usnic_err("Failed to transistion %u from %s to %s",
+		usnic_err("Failed to transition %u from %s to %s",
 		qp_grp->grp_id,
 		usnic_ib_qp_grp_state_to_string(old_state),
 		usnic_ib_qp_grp_state_to_string(new_state));
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index b8632bf9a7f..a31a9e40eed 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -109,7 +109,7 @@ config XTENSA_MX
 config IRQ_CROSSBAR
 	bool
 	help
-	  Support for a CROSSBAR ip that preceeds the main interrupt controller.
+	  Support for a CROSSBAR ip that precedes the main interrupt controller.
 	  The primary irqchip invokes the crossbar's callback which inturn allocates
 	  a free irq and configures the IP. Thus the peripheral interrupts are
 	  routed to one of the free irqchip interrupt lines.
diff --git a/drivers/media/i2c/cx25840/cx25840-ir.c b/drivers/media/i2c/cx25840/cx25840-ir.c
index e6588ee5bdb..4cf8f18bf09 100644
--- a/drivers/media/i2c/cx25840/cx25840-ir.c
+++ b/drivers/media/i2c/cx25840/cx25840-ir.c
@@ -224,7 +224,7 @@ static inline unsigned int lpf_count_to_us(unsigned int count)
 }
 
 /*
- * FIFO register pulse width count compuations
+ * FIFO register pulse width count computations
  */
 static u32 clock_divider_to_resolution(u16 divider)
 {
diff --git a/drivers/media/pci/cx23885/cx23888-ir.c b/drivers/media/pci/cx23885/cx23888-ir.c
index 2c951dec2d3..c2ff5fc0115 100644
--- a/drivers/media/pci/cx23885/cx23888-ir.c
+++ b/drivers/media/pci/cx23885/cx23888-ir.c
@@ -263,7 +263,7 @@ static inline unsigned int lpf_count_to_us(unsigned int count)
 }
 
 /*
- * FIFO register pulse width count compuations
+ * FIFO register pulse width count computations
  */
 static u32 clock_divider_to_resolution(u16 divider)
 {
diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c b/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c
index e60cbb3aa60..f86cec091bf 100644
--- a/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c
+++ b/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c
@@ -259,7 +259,7 @@ static int vv6410_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
 	fine = val % VV6410_CIF_LINELENGTH;
 	coarse = min(512, val / VV6410_CIF_LINELENGTH);
 
-	PDEBUG(D_CONF, "Set coarse exposure to %d, fine expsure to %d",
+	PDEBUG(D_CONF, "Set coarse exposure to %d, fine exposure to %d",
 	       coarse, fine);
 
 	err = stv06xx_write_sensor(sd, VV6410_FINEH, fine >> 8);
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index a0e9422b55a..959c313d84a 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -424,7 +424,7 @@ static int mei_me_pm_runtime_resume(struct device *device)
 }
 
 /**
- * mei_me_set_pm_domain - fill and set pm domian stucture for device
+ * mei_me_set_pm_domain - fill and set pm domain structure for device
  *
  * @dev: mei_device
  */
@@ -444,7 +444,7 @@ static inline void mei_me_set_pm_domain(struct mei_device *dev)
 }
 
 /**
- * mei_me_unset_pm_domain - clean pm domian stucture for device
+ * mei_me_unset_pm_domain - clean pm domain structure for device
  *
  * @dev: mei_device
  */
diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c
index 19de57368b7..74727dda51c 100644
--- a/drivers/misc/mei/pci-txe.c
+++ b/drivers/misc/mei/pci-txe.c
@@ -371,7 +371,7 @@ static int mei_txe_pm_runtime_resume(struct device *device)
 }
 
 /**
- * mei_txe_set_pm_domain - fill and set pm domian stucture for device
+ * mei_txe_set_pm_domain - fill and set pm domain structure for device
  *
  * @dev: mei_device
  */
@@ -391,7 +391,7 @@ static inline void mei_txe_set_pm_domain(struct mei_device *dev)
 }
 
 /**
- * mei_txe_unset_pm_domain - clean pm domian stucture for device
+ * mei_txe_unset_pm_domain - clean pm domain structure for device
  *
  * @dev: mei_device
  */
diff --git a/drivers/net/bonding/bond_sysfs_slave.c b/drivers/net/bonding/bond_sysfs_slave.c
index 5cd532ca1cf..b01b0ce4d1b 100644
--- a/drivers/net/bonding/bond_sysfs_slave.c
+++ b/drivers/net/bonding/bond_sysfs_slave.c
@@ -36,7 +36,7 @@ static ssize_t state_show(struct slave *slave, char *buf)
 	case BOND_STATE_BACKUP:
 		return sprintf(buf, "backup\n");
 	default:
-		return sprintf(buf, "UNKONWN\n");
+		return sprintf(buf, "UNKNOWN\n");
 	}
 }
 static SLAVE_ATTR_RO(state);
diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index 02a2e90d581..923c4878461 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -1695,7 +1695,7 @@ static int mlx4_master_activate_admin_state(struct mlx4_priv *priv, int slave)
 			if (err) {
 				vp_oper->vlan_idx = NO_INDX;
 				mlx4_warn(&priv->dev,
-					  "No vlan resorces slave %d, port %d\n",
+					  "No vlan resources slave %d, port %d\n",
 					  slave, port);
 				return err;
 			}
@@ -1711,7 +1711,7 @@ static int mlx4_master_activate_admin_state(struct mlx4_priv *priv, int slave)
 				err = vp_oper->mac_idx;
 				vp_oper->mac_idx = NO_INDX;
 				mlx4_warn(&priv->dev,
-					  "No mac resorces slave %d, port %d\n",
+					  "No mac resources slave %d, port %d\n",
 					  slave, port);
 				return err;
 			}
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
index db4280ce9c0..716fc37ada5 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
@@ -922,7 +922,7 @@ int netxen_config_ipaddr(struct netxen_adapter *adapter, __be32 ip, int cmd)
 
 	rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 	if (rv != 0) {
-		printk(KERN_ERR "%s: could not notify %s IP 0x%x reuqest\n",
+		printk(KERN_ERR "%s: could not notify %s IP 0x%x request\n",
 				adapter->netdev->name,
 				(cmd == NX_IP_UP) ? "Add" : "Remove", ip);
 	}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
index 851cb4a80d5..03cd4c3d783 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c
@@ -941,7 +941,7 @@ void qlcnic_82xx_config_ipaddr(struct qlcnic_adapter *adapter,
 	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 	if (rv != 0)
 		dev_err(&adapter->netdev->dev,
-				"could not notify %s IP 0x%x reuqest\n",
+				"could not notify %s IP 0x%x request\n",
 				(cmd == QLCNIC_IP_UP) ? "Add" : "Remove", ip);
 }
 
diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c
index f5fbc12d3e1..a43e8492b1c 100644
--- a/drivers/net/ethernet/via/via-velocity.c
+++ b/drivers/net/ethernet/via/via-velocity.c
@@ -2056,7 +2056,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
 	struct sk_buff *skb;
 
 	if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) {
-		VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->netdev->name);
+		VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame spans multiple RDs.\n", vptr->netdev->name);
 		stats->rx_length_errors++;
 		return -EINVAL;
 	}
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 47a998d8f99..40ab7f0b7be 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -1353,7 +1353,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
 		wait_event_interruptible_timeout(priv->scan_q,
 						 (priv->scan_req == NULL),
 						 (15 * HZ));
-		lbs_deb_assoc("assoc: scanning competed\n");
+		lbs_deb_assoc("assoc: scanning completed\n");
 	}
 
 	/* Find the BSS we want using available scan results */
diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index 088de9d25c3..25c5acc78bd 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -332,7 +332,7 @@ static int lbtf_op_start(struct ieee80211_hw *hw)
 
 err_prog_firmware:
 	priv->hw_reset_device(card);
-	lbtf_deb_leave_args(LBTF_DEB_MACOPS, "error programing fw; ret=%d", ret);
+	lbtf_deb_leave_args(LBTF_DEB_MACOPS, "error programming fw; ret=%d", ret);
 	return ret;
 }
 
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 3bbcbf12c1f..4dcfb7116a0 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -540,7 +540,7 @@ config ASUS_NB_WMI
 	  This is a driver for newer Asus notebooks. It adds extra features
 	  like wireless radio and bluetooth control, leds, hotkeys, backlight...
 
-	  For more informations, see
+	  For more information, see
 	  <file:Documentation/ABI/testing/sysfs-platform-asus-wmi>
 
 	  If you have an ACPI-WMI compatible Asus Notebook, say Y or M
@@ -553,7 +553,7 @@ config EEEPC_WMI
 	  This is a driver for newer Eee PC laptops. It adds extra features
 	  like wireless radio and bluetooth control, leds, hotkeys, backlight...
 
-	  For more informations, see
+	  For more information, see
 	  <file:Documentation/ABI/testing/sysfs-platform-asus-wmi>
 
 	  If you have an ACPI-WMI compatible Eee PC laptop (>= 1000), say Y or M
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index 6739069477d..3b3d599103f 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -70,7 +70,7 @@ config AIC79XX_DEBUG_MASK
 	default "0"
 	help
 	Bit mask of debug options that is only valid if the
-	CONFIG_AIC79XX_DEBUG_ENBLE option is enabled.  The bits in this mask
+	CONFIG_AIC79XX_DEBUG_ENABLE option is enabled.  The bits in this mask
 	are defined in the drivers/scsi/aic7xxx/aic79xx.h - search for the
 	variable ahd_debug in that file to find them.
 
diff --git a/drivers/scsi/fnic/fnic_debugfs.c b/drivers/scsi/fnic/fnic_debugfs.c
index 2c613bdea78..5980c10c734 100644
--- a/drivers/scsi/fnic/fnic_debugfs.c
+++ b/drivers/scsi/fnic/fnic_debugfs.c
@@ -210,7 +210,7 @@ static ssize_t fnic_trace_ctrl_write(struct file *filp,
 	else if (*trace_type == fc_trc_flag->fc_clear)
 		fnic_fc_trace_cleared = val;
 	else
-		pr_err("fnic: cannot write to any debufs file\n");
+		pr_err("fnic: cannot write to any debugfs file\n");
 
 	(*ppos)++;
 
diff --git a/drivers/scsi/fnic/fnic_trace.c b/drivers/scsi/fnic/fnic_trace.c
index c7728592682..8b1b38751b4 100644
--- a/drivers/scsi/fnic/fnic_trace.c
+++ b/drivers/scsi/fnic/fnic_trace.c
@@ -592,7 +592,7 @@ int fnic_fc_trace_set_data(u32 host_no, u8 frame_type,
 
 	if (fnic_fc_trace_cleared == 1) {
 		fc_trace_entries.rd_idx = fc_trace_entries.wr_idx = 0;
-		pr_info("fnic: Reseting the read idx\n");
+		pr_info("fnic: Resetting the read idx\n");
 		memset((void *)fnic_fc_ctlr_trace_buf_p, 0,
 				fnic_fc_trace_max_pages * PAGE_SIZE);
 		fnic_fc_trace_cleared = 0;
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 50b086aef17..53284eb23a1 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -930,7 +930,7 @@ static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct s
 
 	/* check target ID is not same as this initiator ID */
 	if (scmd_id(SCpnt) == SCpnt->device->host->this_id) {
-		nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "terget==host???");
+		nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "target==host???");
 		SCpnt->result = DID_BAD_TARGET << 16;
 		done(SCpnt);
 		return 0;
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 340ceff0382..34aad32829f 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -533,7 +533,7 @@ static int nsp_negate_signal(struct scsi_cmnd *SCpnt, unsigned char mask,
 	} while ((--time_out != 0) && (reg & mask) != 0);
 
 	if (time_out == 0) {
-		nsp_msg(KERN_DEBUG, " %s signal off timeut", str);
+		nsp_msg(KERN_DEBUG, " %s signal off timeout", str);
 	}
 
 	return 0;
diff --git a/drivers/scsi/qla2xxx/qla_nx2.c b/drivers/scsi/qla2xxx/qla_nx2.c
index da9e3902f21..24a852828b5 100644
--- a/drivers/scsi/qla2xxx/qla_nx2.c
+++ b/drivers/scsi/qla2xxx/qla_nx2.c
@@ -399,7 +399,7 @@ qla8044_idc_lock(struct qla_hw_data *ha)
 				 */
 				 ql_dbg(ql_dbg_p3p, vha, 0xb08a,
 				     "%s: IDC lock Recovery by %d "
-				     "failed, Retrying timout\n", __func__,
+				     "failed, Retrying timeout\n", __func__,
 				     ha->portnum);
 				 timeout = 0;
 			}
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 82800a77550..56f4336ffa8 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -126,7 +126,7 @@ config XPS_USB_HCD_XILINX
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	---help---
-		Xilinx xps USB host controller core is EHCI compilant and has
+		Xilinx xps USB host controller core is EHCI compliant and has
 		transaction translator built-in. It can be configured to either
 		support both high speed and full speed devices, or high speed
 		devices only.
diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c
index 7db5234462d..a6f7cc0a088 100644
--- a/drivers/video/backlight/88pm860x_bl.c
+++ b/drivers/video/backlight/88pm860x_bl.c
@@ -216,7 +216,7 @@ static int pm860x_backlight_probe(struct platform_device *pdev)
 	data->reg_duty_cycle = res->start;
 	res = platform_get_resource_byname(pdev, IORESOURCE_REG, "always on");
 	if (!res) {
-		dev_err(&pdev->dev, "No REG resorce for always on\n");
+		dev_err(&pdev->dev, "No REG resource for always on\n");
 		return -ENXIO;
 	}
 	data->reg_always_on = res->start;