xircom: Move the Xircom driver

Move the Xircom driver into drivers/net/ethernet/xircom/ and
make the necessary Kconfig and Makefile changes.

CC: <psheer@icon.co.za>
CC: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

7 files changed, 37 insertions, 10 deletions

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index df8940d0a7c..f011665546d 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -160,5 +160,6 @@ source "drivers/net/ethernet/toshiba/Kconfig"
 source "drivers/net/ethernet/tundra/Kconfig"
 source "drivers/net/ethernet/via/Kconfig"
 source "drivers/net/ethernet/xilinx/Kconfig"
+source "drivers/net/ethernet/xircom/Kconfig"
 
 endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 09f26b64a76..7f3b73ca428 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -69,3 +69,4 @@ obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
 obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/
 obj-$(CONFIG_NET_VENDOR_VIA) += via/
 obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/
+obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/
diff --git a/drivers/net/ethernet/xircom/Kconfig b/drivers/net/ethernet/xircom/Kconfig
new file mode 100644
index 00000000000..3d64e58e3f8
--- /dev/null
+++ b/drivers/net/ethernet/xircom/Kconfig
@@ -0,0 +1,30 @@
+#
+# Xircom network device configuration
+#
+
+config NET_VENDOR_XIRCOM
+	bool "Xircom devices"
+	depends on PCMCIA
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Xircom cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_XIRCOM
+
+config PCMCIA_XIRC2PS
+	tristate "Xircom 16-bit PCMCIA support"
+	depends on PCMCIA
+	---help---
+	  Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
+	  Ethernet or Fast Ethernet card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called xirc2ps_cs.  If unsure, say N.
+
+endif # NET_VENDOR_XIRCOM
diff --git a/drivers/net/ethernet/xircom/Makefile b/drivers/net/ethernet/xircom/Makefile
new file mode 100644
index 00000000000..3b7aebd8b84
--- /dev/null
+++ b/drivers/net/ethernet/xircom/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Xircom network device drivers.
+#
+
+obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/ethernet/xircom/xirc2ps_cs.c
index e33b190d716..e33b190d716 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/ethernet/xircom/xirc2ps_cs.c
diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
index 80d291ea672..12e7ae47c06 100644
--- a/drivers/net/pcmcia/Kconfig
+++ b/drivers/net/pcmcia/Kconfig
@@ -21,15 +21,6 @@ menuconfig NET_PCMCIA
 
 if NET_PCMCIA && PCMCIA
 
-config PCMCIA_XIRC2PS
-	tristate "Xircom 16-bit PCMCIA support"
-	help
-	  Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
-	  Ethernet or Fast Ethernet card to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called xirc2ps_cs.  If unsure, say N.
-
 config ARCNET_COM20020_CS
 	tristate "COM20020 ARCnet PCMCIA support"
 	depends on ARCNET_COM20020
diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile
index ccf5535e9d3..618e81667ca 100644
--- a/drivers/net/pcmcia/Makefile
+++ b/drivers/net/pcmcia/Makefile
@@ -3,7 +3,6 @@
 #
 
 # 16-bit client drivers
-obj-$(CONFIG_PCMCIA_XIRC2PS)	+= xirc2ps_cs.o
 obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o
 
 obj-$(CONFIG_PCMCIA_IBMTR)	+= ibmtr_cs.o