Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "These are changes for drivers that are intimately tied to some SoC and
  for some reason could not get merged through the respective subsystem
  maintainer tree.

  This time around, much of this is for at91, with the bulk of it being
  syscon and udc drivers.

  Also, there's:
   - coupled cpuidle support for Samsung Exynos4210
   - Renesas 73A0 common-clk work
   - of/platform changes to tear down DMA mappings on device destruction
   - a few updates to the TI Keystone knav code"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  cpuidle: exynos: add coupled cpuidle support for exynos4210
  ARM: EXYNOS: apply S5P_CENTRAL_SEQ_OPTION fix only when necessary
  soc: ti: knav_qmss_queue: change knav_range_setup_acc_irq to static
  soc: ti: knav_qmss_queue: makefile tweak to build as dynamic module
  pcmcia: at91_cf: depend on !ARCH_MULTIPLATFORM
  soc: ti: knav_qmss_queue: export API calls for use by user driver
  of/platform: teardown DMA mappings on device destruction
  usb: gadget: at91_udc: Allocate udc instance
  usb: gadget: at91_udc: Update DT binding documentation
  usb: gadget: at91_udc: Rework for multi-platform kernel support
  usb: gadget: at91_udc: Simplify probe and remove functions
  usb: gadget: at91_udc: Remove non-DT handling code
  usb: gadget: at91_udc: Document DT clocks and clock-names property
  usb: gadget: at91_udc: Drop uclk clock
  usb: gadget: at91_udc: Fix clock names
  mfd: syscon: Add Atmel SMC binding doc
  mfd: syscon: Add atmel-smc registers definition
  mfd: syscon: Add Atmel Matrix bus DT binding documentation
  mfd: syscon: Add atmel-matrix registers definition
  clk: shmobile: fix sparse NULL pointer warning
  ...

12 files changed, 586 insertions, 261 deletions

diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile
index 960bf22d42a..f83980f2b95 100644
--- a/drivers/clk/shmobile/Makefile
+++ b/drivers/clk/shmobile/Makefile
@@ -5,5 +5,6 @@ obj-$(CONFIG_ARCH_R8A7779)		+= clk-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)		+= clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7794)		+= clk-rcar-gen2.o
+obj-$(CONFIG_ARCH_SH73A0)		+= clk-sh73a0.o
 obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= clk-div6.o
 obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= clk-mstp.o
diff --git a/drivers/clk/shmobile/clk-sh73a0.c b/drivers/clk/shmobile/clk-sh73a0.c
new file mode 100644
index 00000000000..cd529cfe412
--- /dev/null
+++ b/drivers/clk/shmobile/clk-sh73a0.c
@@ -0,0 +1,218 @@
+/*
+ * sh73a0 Core CPG Clocks
+ *
+ * Copyright (C) 2014  Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/shmobile.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+
+struct sh73a0_cpg {
+	struct clk_onecell_data data;
+	spinlock_t lock;
+	void __iomem *reg;
+};
+
+#define CPG_FRQCRA	0x00
+#define CPG_FRQCRB	0x04
+#define CPG_SD0CKCR	0x74
+#define CPG_SD1CKCR	0x78
+#define CPG_SD2CKCR	0x7c
+#define CPG_PLLECR	0xd0
+#define CPG_PLL0CR	0xd8
+#define CPG_PLL1CR	0x28
+#define CPG_PLL2CR	0x2c
+#define CPG_PLL3CR	0xdc
+#define CPG_CKSCR	0xc0
+#define CPG_DSI0PHYCR	0x6c
+#define CPG_DSI1PHYCR	0x70
+
+#define CLK_ENABLE_ON_INIT BIT(0)
+
+struct div4_clk {
+	const char *name;
+	const char *parent;
+	unsigned int reg;
+	unsigned int shift;
+};
+
+static struct div4_clk div4_clks[] = {
+	{ "zg", "pll0", CPG_FRQCRA, 16 },
+	{ "m3", "pll1", CPG_FRQCRA, 12 },
+	{ "b",  "pll1", CPG_FRQCRA,  8 },
+	{ "m1", "pll1", CPG_FRQCRA,  4 },
+	{ "m2", "pll1", CPG_FRQCRA,  0 },
+	{ "zx", "pll1", CPG_FRQCRB, 12 },
+	{ "hp", "pll1", CPG_FRQCRB,  4 },
+	{ NULL, NULL, 0, 0 },
+};
+
+static const struct clk_div_table div4_div_table[] = {
+	{ 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 }, { 4, 8 }, { 5, 12 },
+	{ 6, 16 }, { 7, 18 }, { 8, 24 }, { 10, 36 }, { 11, 48 },
+	{ 12, 7 }, { 0, 0 }
+};
+
+static const struct clk_div_table z_div_table[] = {
+	/* ZSEL == 0 */
+	{ 0, 1 }, { 1, 1 }, { 2, 1 }, { 3, 1 }, { 4, 1 }, { 5, 1 },
+	{ 6, 1 }, { 7, 1 }, { 8, 1 }, { 9, 1 }, { 10, 1 }, { 11, 1 },
+	{ 12, 1 }, { 13, 1 }, { 14, 1 }, { 15, 1 },
+	/* ZSEL == 1 */
+	{ 16, 2 }, { 17, 3 }, { 18, 4 }, { 19, 6 }, { 20, 8 }, { 21, 12 },
+	{ 22, 16 }, { 24, 24 }, { 27, 48 }, { 0, 0 }
+};
+
+static struct clk * __init
+sh73a0_cpg_register_clock(struct device_node *np, struct sh73a0_cpg *cpg,
+			     const char *name)
+{
+	const struct clk_div_table *table = NULL;
+	unsigned int shift, reg, width;
+	const char *parent_name;
+	unsigned int mult = 1;
+	unsigned int div = 1;
+
+	if (!strcmp(name, "main")) {
+		/* extal1, extal1_div2, extal2, extal2_div2 */
+		u32 parent_idx = (clk_readl(cpg->reg + CPG_CKSCR) >> 28) & 3;
+
+		parent_name = of_clk_get_parent_name(np, parent_idx >> 1);
+		div = (parent_idx & 1) + 1;
+	} else if (!strncmp(name, "pll", 3)) {
+		void __iomem *enable_reg = cpg->reg;
+		u32 enable_bit = name[3] - '0';
+
+		parent_name = "main";
+		switch (enable_bit) {
+		case 0:
+			enable_reg += CPG_PLL0CR;
+			break;
+		case 1:
+			enable_reg += CPG_PLL1CR;
+			break;
+		case 2:
+			enable_reg += CPG_PLL2CR;
+			break;
+		case 3:
+			enable_reg += CPG_PLL3CR;
+			break;
+		default:
+			return ERR_PTR(-EINVAL);
+		}
+		if (clk_readl(cpg->reg + CPG_PLLECR) & BIT(enable_bit)) {
+			mult = ((clk_readl(enable_reg) >> 24) & 0x3f) + 1;
+			/* handle CFG bit for PLL1 and PLL2 */
+			if (enable_bit == 1 || enable_bit == 2)
+				if (clk_readl(enable_reg) & BIT(20))
+					mult *= 2;
+		}
+	} else if (!strcmp(name, "dsi0phy") || !strcmp(name, "dsi1phy")) {
+		u32 phy_no = name[3] - '0';
+		void __iomem *dsi_reg = cpg->reg +
+			(phy_no ? CPG_DSI1PHYCR : CPG_DSI0PHYCR);
+
+		parent_name = phy_no ? "dsi1pck" : "dsi0pck";
+		mult = __raw_readl(dsi_reg);
+		if (!(mult & 0x8000))
+			mult = 1;
+		else
+			mult = (mult & 0x3f) + 1;
+	} else if (!strcmp(name, "z")) {
+		parent_name = "pll0";
+		table = z_div_table;
+		reg = CPG_FRQCRB;
+		shift = 24;
+		width = 5;
+	} else {
+		struct div4_clk *c;
+
+		for (c = div4_clks; c->name; c++) {
+			if (!strcmp(name, c->name)) {
+				parent_name = c->parent;
+				table = div4_div_table;
+				reg = c->reg;
+				shift = c->shift;
+				width = 4;
+				break;
+			}
+		}
+		if (!c->name)
+			return ERR_PTR(-EINVAL);
+	}
+
+	if (!table) {
+		return clk_register_fixed_factor(NULL, name, parent_name, 0,
+						 mult, div);
+	} else {
+		return clk_register_divider_table(NULL, name, parent_name, 0,
+						  cpg->reg + reg, shift, width, 0,
+						  table, &cpg->lock);
+	}
+}
+
+static void __init sh73a0_cpg_clocks_init(struct device_node *np)
+{
+	struct sh73a0_cpg *cpg;
+	struct clk **clks;
+	unsigned int i;
+	int num_clks;
+
+	num_clks = of_property_count_strings(np, "clock-output-names");
+	if (num_clks < 0) {
+		pr_err("%s: failed to count clocks\n", __func__);
+		return;
+	}
+
+	cpg = kzalloc(sizeof(*cpg), GFP_KERNEL);
+	clks = kcalloc(num_clks, sizeof(*clks), GFP_KERNEL);
+	if (cpg == NULL || clks == NULL) {
+		/* We're leaking memory on purpose, there's no point in cleaning
+		 * up as the system won't boot anyway.
+		 */
+		return;
+	}
+
+	spin_lock_init(&cpg->lock);
+
+	cpg->data.clks = clks;
+	cpg->data.clk_num = num_clks;
+
+	cpg->reg = of_iomap(np, 0);
+	if (WARN_ON(cpg->reg == NULL))
+		return;
+
+	/* Set SDHI clocks to a known state */
+	clk_writel(0x108, cpg->reg + CPG_SD0CKCR);
+	clk_writel(0x108, cpg->reg + CPG_SD1CKCR);
+	clk_writel(0x108, cpg->reg + CPG_SD2CKCR);
+
+	for (i = 0; i < num_clks; ++i) {
+		const char *name;
+		struct clk *clk;
+
+		of_property_read_string_index(np, "clock-output-names", i,
+					      &name);
+
+		clk = sh73a0_cpg_register_clock(np, cpg, name);
+		if (IS_ERR(clk))
+			pr_err("%s: failed to register %s %s clock (%ld)\n",
+			       __func__, np->name, name, PTR_ERR(clk));
+		else
+			cpg->data.clks[i] = clk;
+	}
+
+	of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
+}
+CLK_OF_DECLARE(sh73a0_cpg_clks, "renesas,sh73a0-cpg-clocks",
+	       sh73a0_cpg_clocks_init);
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index 8c16ab20fb1..8e07c941915 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -55,6 +55,7 @@ config ARM_AT91_CPUIDLE
 config ARM_EXYNOS_CPUIDLE
 	bool "Cpu Idle Driver for the Exynos processors"
 	depends on ARCH_EXYNOS
+	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 	help
 	  Select this to enable cpuidle for Exynos processors
 
diff --git a/drivers/cpuidle/cpuidle-exynos.c b/drivers/cpuidle/cpuidle-exynos.c
index 4003a316086..26f5f29fdb0 100644
--- a/drivers/cpuidle/cpuidle-exynos.c
+++ b/drivers/cpuidle/cpuidle-exynos.c
@@ -1,8 +1,11 @@
-/* linux/arch/arm/mach-exynos/cpuidle.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
+ * Coupled cpuidle support based on the work of:
+ *	Colin Cross <ccross@android.com>
+ *	Daniel Lezcano <daniel.lezcano@linaro.org>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -13,13 +16,49 @@
 #include <linux/export.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/platform_data/cpuidle-exynos.h>
 
 #include <asm/proc-fns.h>
 #include <asm/suspend.h>
 #include <asm/cpuidle.h>
 
+static atomic_t exynos_idle_barrier;
+
+static struct cpuidle_exynos_data *exynos_cpuidle_pdata;
 static void (*exynos_enter_aftr)(void);
 
+static int exynos_enter_coupled_lowpower(struct cpuidle_device *dev,
+					 struct cpuidle_driver *drv,
+					 int index)
+{
+	int ret;
+
+	exynos_cpuidle_pdata->pre_enter_aftr();
+
+	/*
+	 * Waiting all cpus to reach this point at the same moment
+	 */
+	cpuidle_coupled_parallel_barrier(dev, &exynos_idle_barrier);
+
+	/*
+	 * Both cpus will reach this point at the same time
+	 */
+	ret = dev->cpu ? exynos_cpuidle_pdata->cpu1_powerdown()
+		       : exynos_cpuidle_pdata->cpu0_enter_aftr();
+	if (ret)
+		index = ret;
+
+	/*
+	 * Waiting all cpus to finish the power sequence before going further
+	 */
+	cpuidle_coupled_parallel_barrier(dev, &exynos_idle_barrier);
+
+	exynos_cpuidle_pdata->post_enter_aftr();
+
+	return index;
+}
+
 static int exynos_enter_lowpower(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
 				int index)
@@ -55,13 +94,40 @@ static struct cpuidle_driver exynos_idle_driver = {
 	.safe_state_index = 0,
 };
 
+static struct cpuidle_driver exynos_coupled_idle_driver = {
+	.name			= "exynos_coupled_idle",
+	.owner			= THIS_MODULE,
+	.states = {
+		[0] = ARM_CPUIDLE_WFI_STATE,
+		[1] = {
+			.enter			= exynos_enter_coupled_lowpower,
+			.exit_latency		= 5000,
+			.target_residency	= 10000,
+			.flags			= CPUIDLE_FLAG_COUPLED |
+						  CPUIDLE_FLAG_TIMER_STOP,
+			.name			= "C1",
+			.desc			= "ARM power down",
+		},
+	},
+	.state_count = 2,
+	.safe_state_index = 0,
+};
+
 static int exynos_cpuidle_probe(struct platform_device *pdev)
 {
 	int ret;
 
-	exynos_enter_aftr = (void *)(pdev->dev.platform_data);
+	if (of_machine_is_compatible("samsung,exynos4210")) {
+		exynos_cpuidle_pdata = pdev->dev.platform_data;
+
+		ret = cpuidle_register(&exynos_coupled_idle_driver,
+				       cpu_possible_mask);
+	} else {
+		exynos_enter_aftr = (void *)(pdev->dev.platform_data);
+
+		ret = cpuidle_register(&exynos_idle_driver, NULL);
+	}
 
-	ret = cpuidle_register(&exynos_idle_driver, NULL);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register cpuidle driver\n");
 		return ret;
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index b0d50d70a8a..b189733a153 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -526,6 +526,7 @@ static int of_platform_device_destroy(struct device *dev, void *data)
 		amba_device_unregister(to_amba_device(dev));
 #endif
 
+	of_dma_deconfigure(dev);
 	of_node_clear_flag(dev->of_node, OF_POPULATED);
 	of_node_clear_flag(dev->of_node, OF_POPULATED_BUS);
 	return 0;
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 8843a678f20..3bb49252a09 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -279,6 +279,7 @@ config BFIN_CFPCMCIA
 config AT91_CF
 	tristate "AT91 CompactFlash Controller"
 	depends on PCMCIA && ARCH_AT91
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  Say Y here to support the CompactFlash controller on AT91 chips.
 	  Or choose M to compile the driver as a module named "at91_cf".
diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
index 6bed611e193..135bdad7a6d 100644
--- a/drivers/soc/ti/Makefile
+++ b/drivers/soc/ti/Makefile
@@ -1,5 +1,6 @@
 #
 # TI Keystone SOC drivers
 #
-obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS)	+= knav_qmss_queue.o knav_qmss_acc.o
+obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS)	+= knav_qmss.o
+knav_qmss-y := knav_qmss_queue.o knav_qmss_acc.o
 obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA)	+= knav_dma.o
diff --git a/drivers/soc/ti/knav_qmss_acc.c b/drivers/soc/ti/knav_qmss_acc.c
index 6fbfde6e748..ef6f69db0bd 100644
--- a/drivers/soc/ti/knav_qmss_acc.c
+++ b/drivers/soc/ti/knav_qmss_acc.c
@@ -209,7 +209,7 @@ static irqreturn_t knav_acc_int_handler(int irq, void *_instdata)
 	return IRQ_HANDLED;
 }
 
-int knav_range_setup_acc_irq(struct knav_range_info *range,
+static int knav_range_setup_acc_irq(struct knav_range_info *range,
 				int queue, bool enabled)
 {
 	struct knav_device *kdev = range->kdev;
diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c
index 8e6a95d91d3..6d8646db52c 100644
--- a/drivers/soc/ti/knav_qmss_queue.c
+++ b/drivers/soc/ti/knav_qmss_queue.c
@@ -626,6 +626,7 @@ int knav_queue_push(void *qhandle, dma_addr_t dma,
 	atomic_inc(&qh->stats.pushes);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(knav_queue_push);
 
 /**
  * knav_queue_pop()	- pop data (or descriptor) from the head of a queue
@@ -663,6 +664,7 @@ dma_addr_t knav_queue_pop(void *qhandle, unsigned *size)
 	atomic_inc(&qh->stats.pops);
 	return dma;
 }
+EXPORT_SYMBOL_GPL(knav_queue_pop);
 
 /* carve out descriptors and push into queue */
 static void kdesc_fill_pool(struct knav_pool *pool)
@@ -717,12 +719,14 @@ dma_addr_t knav_pool_desc_virt_to_dma(void *ph, void *virt)
 	struct knav_pool *pool = ph;
 	return pool->region->dma_start + (virt - pool->region->virt_start);
 }
+EXPORT_SYMBOL_GPL(knav_pool_desc_virt_to_dma);
 
 void *knav_pool_desc_dma_to_virt(void *ph, dma_addr_t dma)
 {
 	struct knav_pool *pool = ph;
 	return pool->region->virt_start + (dma - pool->region->dma_start);
 }
+EXPORT_SYMBOL_GPL(knav_pool_desc_dma_to_virt);
 
 /**
  * knav_pool_create()	- Create a pool of descriptors
@@ -878,6 +882,7 @@ void *knav_pool_desc_get(void *ph)
 	data = knav_pool_desc_dma_to_virt(pool, dma);
 	return data;
 }
+EXPORT_SYMBOL_GPL(knav_pool_desc_get);
 
 /**
  * knav_pool_desc_put()	- return a descriptor to the pool
@@ -890,6 +895,7 @@ void knav_pool_desc_put(void *ph, void *desc)
 	dma = knav_pool_desc_virt_to_dma(pool, desc);
 	knav_queue_push(pool->queue, dma, pool->region->desc_size, 0);
 }
+EXPORT_SYMBOL_GPL(knav_pool_desc_put);
 
 /**
  * knav_pool_desc_map()	- Map descriptor for DMA transfer
@@ -916,6 +922,7 @@ int knav_pool_desc_map(void *ph, void *desc, unsigned size,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(knav_pool_desc_map);
 
 /**
  * knav_pool_desc_unmap()	- Unmap descriptor after DMA transfer
@@ -938,6 +945,7 @@ void *knav_pool_desc_unmap(void *ph, dma_addr_t dma, unsigned dma_sz)
 	prefetch(desc);
 	return desc;
 }
+EXPORT_SYMBOL_GPL(knav_pool_desc_unmap);
 
 /**
  * knav_pool_count()	- Get the number of descriptors in pool.
@@ -949,6 +957,7 @@ int knav_pool_count(void *ph)
 	struct knav_pool *pool = ph;
 	return knav_queue_get_count(pool->queue);
 }
+EXPORT_SYMBOL_GPL(knav_pool_count);
 
 static void knav_queue_setup_region(struct knav_device *kdev,
 					struct knav_region *region)
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index b8e213eb36c..366e551aeff 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -32,6 +32,7 @@ menu "USB Peripheral Controller"
 config USB_AT91
 	tristate "Atmel AT91 USB Device Port"
 	depends on ARCH_AT91
+	depends on OF || COMPILE_TEST
 	help
 	   Many Atmel AT91 processors (such as the AT91RM2000) have a
 	   full speed USB Device Port with support for five configurable
diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c
index c0ec5f71f16..2fbedca3c2b 100644
--- a/drivers/usb/gadget/udc/at91_udc.c
+++ b/drivers/usb/gadget/udc/at91_udc.c
@@ -31,16 +31,9 @@
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/platform_data/atmel.h>
-
-#include <asm/byteorder.h>
-#include <mach/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/gpio.h>
-
-#include <mach/cpu.h>
-#include <mach/at91sam9261_matrix.h>
-#include <mach/at91_matrix.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-matrix.h>
 
 #include "at91_udc.h"
 
@@ -66,7 +59,15 @@
 #define	DRIVER_VERSION	"3 May 2006"
 
 static const char driver_name [] = "at91_udc";
-static const char ep0name[] = "ep0";
+static const char * const ep_names[] = {
+	"ep0",
+	"ep1",
+	"ep2",
+	"ep3-int",
+	"ep4",
+	"ep5",
+};
+#define ep0name		ep_names[0]
 
 #define VBUS_POLL_TIMEOUT	msecs_to_jiffies(1000)
 
@@ -895,8 +896,6 @@ static void clk_on(struct at91_udc *udc)
 		return;
 	udc->clocked = 1;
 
-	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		clk_enable(udc->uclk);
 	clk_enable(udc->iclk);
 	clk_enable(udc->fclk);
 }
@@ -909,8 +908,6 @@ static void clk_off(struct at91_udc *udc)
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
 	clk_disable(udc->fclk);
 	clk_disable(udc->iclk);
-	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		clk_disable(udc->uclk);
 }
 
 /*
@@ -919,8 +916,6 @@ static void clk_off(struct at91_udc *udc)
  */
 static void pullup(struct at91_udc *udc, int is_on)
 {
-	int	active = !udc->board.pullup_active_low;
-
 	if (!udc->enabled || !udc->vbus)
 		is_on = 0;
 	DBG("%sactive\n", is_on ? "" : "in");
@@ -929,40 +924,15 @@ static void pullup(struct at91_udc *udc, int is_on)
 		clk_on(udc);
 		at91_udp_write(udc, AT91_UDP_ICR, AT91_UDP_RXRSM);
 		at91_udp_write(udc, AT91_UDP_TXVC, 0);
-		if (cpu_is_at91rm9200())
-			gpio_set_value(udc->board.pullup_pin, active);
-		else if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
-			u32	txvc = at91_udp_read(udc, AT91_UDP_TXVC);
-
-			txvc |= AT91_UDP_TXVC_PUON;
-			at91_udp_write(udc, AT91_UDP_TXVC, txvc);
-		} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
-			u32	usbpucr;
-
-			usbpucr = at91_matrix_read(AT91_MATRIX_USBPUCR);
-			usbpucr |= AT91_MATRIX_USBPUCR_PUON;
-			at91_matrix_write(AT91_MATRIX_USBPUCR, usbpucr);
-		}
 	} else {
 		stop_activity(udc);
 		at91_udp_write(udc, AT91_UDP_IDR, AT91_UDP_RXRSM);
 		at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
-		if (cpu_is_at91rm9200())
-			gpio_set_value(udc->board.pullup_pin, !active);
-		else if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
-			u32	txvc = at91_udp_read(udc, AT91_UDP_TXVC);
-
-			txvc &= ~AT91_UDP_TXVC_PUON;
-			at91_udp_write(udc, AT91_UDP_TXVC, txvc);
-		} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
-			u32	usbpucr;
-
-			usbpucr = at91_matrix_read(AT91_MATRIX_USBPUCR);
-			usbpucr &= ~AT91_MATRIX_USBPUCR_PUON;
-			at91_matrix_write(AT91_MATRIX_USBPUCR, usbpucr);
-		}
 		clk_off(udc);
 	}
+
+	if (udc->caps && udc->caps->pullup)
+		udc->caps->pullup(udc, is_on);
 }
 
 /* vbus is here!  turn everything on that's ready */
@@ -1535,74 +1505,6 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
 
 /*-------------------------------------------------------------------------*/
 
-static struct at91_udc controller = {
-	.gadget = {
-		.ops	= &at91_udc_ops,
-		.ep0	= &controller.ep[0].ep,
-		.name	= driver_name,
-	},
-	.ep[0] = {
-		.ep = {
-			.name	= ep0name,
-			.ops	= &at91_ep_ops,
-		},
-		.udc		= &controller,
-		.maxpacket	= 8,
-		.int_mask	= 1 << 0,
-	},
-	.ep[1] = {
-		.ep = {
-			.name	= "ep1",
-			.ops	= &at91_ep_ops,
-		},
-		.udc		= &controller,
-		.is_pingpong	= 1,
-		.maxpacket	= 64,
-		.int_mask	= 1 << 1,
-	},
-	.ep[2] = {
-		.ep = {
-			.name	= "ep2",
-			.ops	= &at91_ep_ops,
-		},
-		.udc		= &controller,
-		.is_pingpong	= 1,
-		.maxpacket	= 64,
-		.int_mask	= 1 << 2,
-	},
-	.ep[3] = {
-		.ep = {
-			/* could actually do bulk too */
-			.name	= "ep3-int",
-			.ops	= &at91_ep_ops,
-		},
-		.udc		= &controller,
-		.maxpacket	= 8,
-		.int_mask	= 1 << 3,
-	},
-	.ep[4] = {
-		.ep = {
-			.name	= "ep4",
-			.ops	= &at91_ep_ops,
-		},
-		.udc		= &controller,
-		.is_pingpong	= 1,
-		.maxpacket	= 256,
-		.int_mask	= 1 << 4,
-	},
-	.ep[5] = {
-		.ep = {
-			.name	= "ep5",
-			.ops	= &at91_ep_ops,
-		},
-		.udc		= &controller,
-		.is_pingpong	= 1,
-		.maxpacket	= 256,
-		.int_mask	= 1 << 5,
-	},
-	/* ep6 and ep7 are also reserved (custom silicon might use them) */
-};
-
 static void at91_vbus_update(struct at91_udc *udc, unsigned value)
 {
 	value ^= udc->board.vbus_active_low;
@@ -1687,12 +1589,202 @@ static void at91udc_shutdown(struct platform_device *dev)
 	spin_unlock_irqrestore(&udc->lock, flags);
 }
 
-static void at91udc_of_init(struct at91_udc *udc,
-				     struct device_node *np)
+static int at91rm9200_udc_init(struct at91_udc *udc)
+{
+	struct at91_ep *ep;
+	int ret;
+	int i;
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+
+		switch (i) {
+		case 0:
+		case 3:
+			ep->maxpacket = 8;
+			break;
+		case 1 ... 2:
+			ep->maxpacket = 64;
+			break;
+		case 4 ... 5:
+			ep->maxpacket = 256;
+			break;
+		}
+	}
+
+	if (!gpio_is_valid(udc->board.pullup_pin)) {
+		DBG("no D+ pullup?\n");
+		return -ENODEV;
+	}
+
+	ret = devm_gpio_request(&udc->pdev->dev, udc->board.pullup_pin,
+				"udc_pullup");
+	if (ret) {
+		DBG("D+ pullup is busy\n");
+		return ret;
+	}
+
+	gpio_direction_output(udc->board.pullup_pin,
+			      udc->board.pullup_active_low);
+
+	return 0;
+}
+
+static void at91rm9200_udc_pullup(struct at91_udc *udc, int is_on)
+{
+	int active = !udc->board.pullup_active_low;
+
+	if (is_on)
+		gpio_set_value(udc->board.pullup_pin, active);
+	else
+		gpio_set_value(udc->board.pullup_pin, !active);
+}
+
+static const struct at91_udc_caps at91rm9200_udc_caps = {
+	.init = at91rm9200_udc_init,
+	.pullup = at91rm9200_udc_pullup,
+};
+
+static int at91sam9260_udc_init(struct at91_udc *udc)
+{
+	struct at91_ep *ep;
+	int i;
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+
+		switch (i) {
+		case 0 ... 3:
+			ep->maxpacket = 64;
+			break;
+		case 4 ... 5:
+			ep->maxpacket = 512;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static void at91sam9260_udc_pullup(struct at91_udc *udc, int is_on)
+{
+	u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
+
+	if (is_on)
+		txvc |= AT91_UDP_TXVC_PUON;
+	else
+		txvc &= ~AT91_UDP_TXVC_PUON;
+
+	at91_udp_write(udc, AT91_UDP_TXVC, txvc);
+}
+
+static const struct at91_udc_caps at91sam9260_udc_caps = {
+	.init = at91sam9260_udc_init,
+	.pullup = at91sam9260_udc_pullup,
+};
+
+static int at91sam9261_udc_init(struct at91_udc *udc)
+{
+	struct at91_ep *ep;
+	int i;
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+
+		switch (i) {
+		case 0:
+			ep->maxpacket = 8;
+			break;
+		case 1 ... 3:
+			ep->maxpacket = 64;
+			break;
+		case 4 ... 5:
+			ep->maxpacket = 256;
+			break;
+		}
+	}
+
+	udc->matrix = syscon_regmap_lookup_by_phandle(udc->pdev->dev.of_node,
+						      "atmel,matrix");
+	if (IS_ERR(udc->matrix))
+		return PTR_ERR(udc->matrix);
+
+	return 0;
+}
+
+static void at91sam9261_udc_pullup(struct at91_udc *udc, int is_on)
+{
+	u32 usbpucr = 0;
+
+	if (is_on)
+		usbpucr = AT91_MATRIX_USBPUCR_PUON;
+
+	regmap_update_bits(udc->matrix, AT91SAM9261_MATRIX_USBPUCR,
+			   AT91_MATRIX_USBPUCR_PUON, usbpucr);
+}
+
+static const struct at91_udc_caps at91sam9261_udc_caps = {
+	.init = at91sam9261_udc_init,
+	.pullup = at91sam9261_udc_pullup,
+};
+
+static int at91sam9263_udc_init(struct at91_udc *udc)
+{
+	struct at91_ep *ep;
+	int i;
+
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+
+		switch (i) {
+		case 0:
+		case 1:
+		case 2:
+		case 3:
+			ep->maxpacket = 64;
+			break;
+		case 4:
+		case 5:
+			ep->maxpacket = 256;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static const struct at91_udc_caps at91sam9263_udc_caps = {
+	.init = at91sam9263_udc_init,
+	.pullup = at91sam9260_udc_pullup,
+};
+
+static const struct of_device_id at91_udc_dt_ids[] = {
+	{
+		.compatible = "atmel,at91rm9200-udc",
+		.data = &at91rm9200_udc_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9260-udc",
+		.data = &at91sam9260_udc_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9261-udc",
+		.data = &at91sam9261_udc_caps,
+	},
+	{
+		.compatible = "atmel,at91sam9263-udc",
+		.data = &at91sam9263_udc_caps,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, at91_udc_dt_ids);
+
+static void at91udc_of_init(struct at91_udc *udc, struct device_node *np)
 {
 	struct at91_udc_data *board = &udc->board;
-	u32 val;
+	const struct of_device_id *match;
 	enum of_gpio_flags flags;
+	u32 val;
 
 	if (of_property_read_u32(np, "atmel,vbus-polled", &val) == 0)
 		board->vbus_polled = 1;
@@ -1705,6 +1797,10 @@ static void at91udc_of_init(struct at91_udc *udc,
 						  &flags);
 
 	board->pullup_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+
+	match = of_match_node(at91_udc_dt_ids, np);
+	if (match)
+		udc->caps = match->data;
 }
 
 static int at91udc_probe(struct platform_device *pdev)
@@ -1713,97 +1809,67 @@ static int at91udc_probe(struct platform_device *pdev)
 	struct at91_udc	*udc;
 	int		retval;
 	struct resource	*res;
+	struct at91_ep	*ep;
+	int		i;
 
-	if (!dev_get_platdata(dev) && !pdev->dev.of_node) {
-		/* small (so we copy it) but critical! */
-		DBG("missing platform_data\n");
-		return -ENODEV;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENXIO;
-
-	if (!request_mem_region(res->start, resource_size(res), driver_name)) {
-		DBG("someone's using UDC memory\n");
-		return -EBUSY;
-	}
+	udc = devm_kzalloc(dev, sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
 
 	/* init software state */
-	udc = &controller;
 	udc->gadget.dev.parent = dev;
-	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node)
-		at91udc_of_init(udc, pdev->dev.of_node);
-	else
-		memcpy(&udc->board, dev_get_platdata(dev),
-		       sizeof(struct at91_udc_data));
+	at91udc_of_init(udc, pdev->dev.of_node);
 	udc->pdev = pdev;
 	udc->enabled = 0;
 	spin_lock_init(&udc->lock);
 
-	/* rm9200 needs manual D+ pullup; off by default */
-	if (cpu_is_at91rm9200()) {
-		if (!gpio_is_valid(udc->board.pullup_pin)) {
-			DBG("no D+ pullup?\n");
-			retval = -ENODEV;
-			goto fail0;
-		}
-		retval = gpio_request(udc->board.pullup_pin, "udc_pullup");
-		if (retval) {
-			DBG("D+ pullup is busy\n");
-			goto fail0;
-		}
-		gpio_direction_output(udc->board.pullup_pin,
-				udc->board.pullup_active_low);
-	}
+	udc->gadget.ops = &at91_udc_ops;
+	udc->gadget.ep0 = &udc->ep[0].ep;
+	udc->gadget.name = driver_name;
+	udc->gadget.dev.init_name = "gadget";
 
-	/* newer chips have more FIFO memory than rm9200 */
-	if (cpu_is_at91sam9260() || cpu_is_at91sam9g20()) {
-		udc->ep[0].maxpacket = 64;
-		udc->ep[3].maxpacket = 64;
-		udc->ep[4].maxpacket = 512;
-		udc->ep[5].maxpacket = 512;
-	} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
-		udc->ep[3].maxpacket = 64;
-	} else if (cpu_is_at91sam9263()) {
-		udc->ep[0].maxpacket = 64;
-		udc->ep[3].maxpacket = 64;
+	for (i = 0; i < NUM_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+		ep->ep.name = ep_names[i];
+		ep->ep.ops = &at91_ep_ops;
+		ep->udc = udc;
+		ep->int_mask = BIT(i);
+		if (i != 0 && i != 3)
+			ep->is_pingpong = 1;
 	}
 
-	udc->udp_baseaddr = ioremap(res->start, resource_size(res));
-	if (!udc->udp_baseaddr) {
-		retval = -ENOMEM;
-		goto fail0a;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	udc->udp_baseaddr = devm_ioremap_resource(dev, res);
+	if (IS_ERR(udc->udp_baseaddr))
+		return PTR_ERR(udc->udp_baseaddr);
+
+	if (udc->caps && udc->caps->init) {
+		retval = udc->caps->init(udc);
+		if (retval)
+			return retval;
 	}
 
 	udc_reinit(udc);
 
 	/* get interface and function clocks */
-	udc->iclk = clk_get(dev, "udc_clk");
-	udc->fclk = clk_get(dev, "udpck");
-	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		udc->uclk = clk_get(dev, "usb_clk");
-	if (IS_ERR(udc->iclk) || IS_ERR(udc->fclk) ||
-	    (IS_ENABLED(CONFIG_COMMON_CLK) && IS_ERR(udc->uclk))) {
-		DBG("clocks missing\n");
-		retval = -ENODEV;
-		goto fail1;
-	}
+	udc->iclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(udc->iclk))
+		return PTR_ERR(udc->iclk);
+
+	udc->fclk = devm_clk_get(dev, "hclk");
+	if (IS_ERR(udc->fclk))
+		return PTR_ERR(udc->fclk);
 
 	/* don't do anything until we have both gadget driver and VBUS */
-	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
-		clk_set_rate(udc->uclk, 48000000);
-		retval = clk_prepare(udc->uclk);
-		if (retval)
-			goto fail1;
-	}
+	clk_set_rate(udc->fclk, 48000000);
 	retval = clk_prepare(udc->fclk);
 	if (retval)
-		goto fail1a;
+		return retval;
 
 	retval = clk_prepare_enable(udc->iclk);
 	if (retval)
-		goto fail1b;
+		goto err_unprepare_fclk;
+
 	at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
 	at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
 	/* Clear all pending interrupts - UDP may be used by bootloader. */
@@ -1812,18 +1878,21 @@ static int at91udc_probe(struct platform_device *pdev)
 
 	/* request UDC and maybe VBUS irqs */
 	udc->udp_irq = platform_get_irq(pdev, 0);
-	retval = request_irq(udc->udp_irq, at91_udc_irq,
-			0, driver_name, udc);
-	if (retval < 0) {
+	retval = devm_request_irq(dev, udc->udp_irq, at91_udc_irq, 0,
+				  driver_name, udc);
+	if (retval) {
 		DBG("request irq %d failed\n", udc->udp_irq);
-		goto fail1c;
+		goto err_unprepare_iclk;
 	}
+
 	if (gpio_is_valid(udc->board.vbus_pin)) {
-		retval = gpio_request(udc->board.vbus_pin, "udc_vbus");
-		if (retval < 0) {
+		retval = devm_gpio_request(dev, udc->board.vbus_pin,
+					   "udc_vbus");
+		if (retval) {
 			DBG("request vbus pin failed\n");
-			goto fail2;
+			goto err_unprepare_iclk;
 		}
+
 		gpio_direction_input(udc->board.vbus_pin);
 
 		/*
@@ -1840,12 +1909,13 @@ static int at91udc_probe(struct platform_device *pdev)
 			mod_timer(&udc->vbus_timer,
 				  jiffies + VBUS_POLL_TIMEOUT);
 		} else {
-			if (request_irq(gpio_to_irq(udc->board.vbus_pin),
-					at91_vbus_irq, 0, driver_name, udc)) {
+			retval = devm_request_irq(dev,
+					gpio_to_irq(udc->board.vbus_pin),
+					at91_vbus_irq, 0, driver_name, udc);
+			if (retval) {
 				DBG("request vbus irq %d failed\n",
 				    udc->board.vbus_pin);
-				retval = -EBUSY;
-				goto fail3;
+				goto err_unprepare_iclk;
 			}
 		}
 	} else {
@@ -1854,49 +1924,27 @@ static int at91udc_probe(struct platform_device *pdev)
 	}
 	retval = usb_add_gadget_udc(dev, &udc->gadget);
 	if (retval)
-		goto fail4;
+		goto err_unprepare_iclk;
 	dev_set_drvdata(dev, udc);
 	device_init_wakeup(dev, 1);
 	create_debug_file(udc);
 
 	INFO("%s version %s\n", driver_name, DRIVER_VERSION);
 	return 0;
-fail4:
-	if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled)
-		free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
-fail3:
-	if (gpio_is_valid(udc->board.vbus_pin))
-		gpio_free(udc->board.vbus_pin);
-fail2:
-	free_irq(udc->udp_irq, udc);
-fail1c:
+
+err_unprepare_iclk:
 	clk_unprepare(udc->iclk);
-fail1b:
+err_unprepare_fclk:
 	clk_unprepare(udc->fclk);
-fail1a:
-	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		clk_unprepare(udc->uclk);
-fail1:
-	if (IS_ENABLED(CONFIG_COMMON_CLK) && !IS_ERR(udc->uclk))
-		clk_put(udc->uclk);
-	if (!IS_ERR(udc->fclk))
-		clk_put(udc->fclk);
-	if (!IS_ERR(udc->iclk))
-		clk_put(udc->iclk);
-	iounmap(udc->udp_baseaddr);
-fail0a:
-	if (cpu_is_at91rm9200())
-		gpio_free(udc->board.pullup_pin);
-fail0:
-	release_mem_region(res->start, resource_size(res));
+
 	DBG("%s probe failed, %d\n", driver_name, retval);
+
 	return retval;
 }
 
 static int __exit at91udc_remove(struct platform_device *pdev)
 {
 	struct at91_udc *udc = platform_get_drvdata(pdev);
-	struct resource *res;
 	unsigned long	flags;
 
 	DBG("remove\n");
@@ -1911,29 +1959,9 @@ static int __exit at91udc_remove(struct platform_device *pdev)
 
 	device_init_wakeup(&pdev->dev, 0);
 	remove_debug_file(udc);
-	if (gpio_is_valid(udc->board.vbus_pin)) {
-		free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
-		gpio_free(udc->board.vbus_pin);
-	}
-	free_irq(udc->udp_irq, udc);
-	iounmap(udc->udp_baseaddr);
-
-	if (cpu_is_at91rm9200())
-		gpio_free(udc->board.pullup_pin);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		clk_unprepare(udc->uclk);
 	clk_unprepare(udc->fclk);
 	clk_unprepare(udc->iclk);
 
-	clk_put(udc->iclk);
-	clk_put(udc->fclk);
-	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		clk_put(udc->uclk);
-
 	return 0;
 }
 
@@ -1989,15 +2017,6 @@ static int at91udc_resume(struct platform_device *pdev)
 #define	at91udc_resume	NULL
 #endif
 
-#if defined(CONFIG_OF)
-static const struct of_device_id at91_udc_dt_ids[] = {
-	{ .compatible = "atmel,at91rm9200-udc" },
-	{ /* sentinel */ }
-};
-
-MODULE_DEVICE_TABLE(of, at91_udc_dt_ids);
-#endif
-
 static struct platform_driver at91_udc_driver = {
 	.remove		= __exit_p(at91udc_remove),
 	.shutdown	= at91udc_shutdown,
@@ -2005,7 +2024,7 @@ static struct platform_driver at91_udc_driver = {
 	.resume		= at91udc_resume,
 	.driver		= {
 		.name	= (char *) driver_name,
-		.of_match_table	= of_match_ptr(at91_udc_dt_ids),
+		.of_match_table	= at91_udc_dt_ids,
 	},
 };
 
diff --git a/drivers/usb/gadget/udc/at91_udc.h b/drivers/usb/gadget/udc/at91_udc.h
index 467dcfb74a5..2679c8b217c 100644
--- a/drivers/usb/gadget/udc/at91_udc.h
+++ b/drivers/usb/gadget/udc/at91_udc.h
@@ -107,6 +107,11 @@ struct at91_ep {
 	unsigned			fifo_bank:1;
 };
 
+struct at91_udc_caps {
+	int (*init)(struct at91_udc *udc);
+	void (*pullup)(struct at91_udc *udc, int is_on);
+};
+
 /*
  * driver is non-SMP, and just blocks IRQs whenever it needs
  * access protection for chip registers or driver state
@@ -115,6 +120,7 @@ struct at91_udc {
 	struct usb_gadget		gadget;
 	struct at91_ep			ep[NUM_ENDPOINTS];
 	struct usb_gadget_driver	*driver;
+	const struct at91_udc_caps	*caps;
 	unsigned			vbus:1;
 	unsigned			enabled:1;
 	unsigned			clocked:1;
@@ -125,7 +131,7 @@ struct at91_udc {
 	unsigned			active_suspend:1;
 	u8				addr;
 	struct at91_udc_data		board;
-	struct clk			*iclk, *fclk, *uclk;
+	struct clk			*iclk, *fclk;
 	struct platform_device		*pdev;
 	struct proc_dir_entry		*pde;
 	void __iomem			*udp_baseaddr;
@@ -133,6 +139,7 @@ struct at91_udc {
 	spinlock_t			lock;
 	struct timer_list		vbus_timer;
 	struct work_struct		vbus_timer_work;
+	struct regmap			*matrix;
 };
 
 static inline struct at91_udc *to_udc(struct usb_gadget *g)