[SCSI] megaraid_sas: frame count optimization

This patch removes duplicated code in frame calculation &  adds
megasas_get_frame_count() that also takes into account the number of frames
that can be contained in the Main frame.
FW uses the frame count to pull sufficient number of frames from host memory.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 47 insertions, 25 deletions

diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 38733b6009a..e177fc5c5dd 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -495,6 +495,46 @@ megasas_make_sgl64(struct megasas_instance *instance, struct scsi_cmnd *scp,
 	return sge_count;
 }
 
+ /**
+ * megasas_get_frame_count - Computes the number of frames
+ * @sge_count		: number of sg elements
+ *
+ * Returns the number of frames required for numnber of sge's (sge_count)
+ */
+
+u32 megasas_get_frame_count(u8 sge_count)
+{
+	int num_cnt;
+	int sge_bytes;
+	u32 sge_sz;
+	u32 frame_count=0;
+
+	sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
+	    sizeof(struct megasas_sge32);
+
+	/*
+	* Main frame can contain 2 SGEs for 64-bit SGLs and
+	* 3 SGEs for 32-bit SGLs
+	*/
+	if (IS_DMA64)
+		num_cnt = sge_count - 2;
+	else
+		num_cnt = sge_count - 3;
+
+	if(num_cnt>0){
+		sge_bytes = sge_sz * num_cnt;
+
+		frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) +
+		    ((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) ;
+	}
+	/* Main frame */
+	frame_count +=1;
+
+	if (frame_count > 7)
+		frame_count = 8;
+	return frame_count;
+}
+
 /**
  * megasas_build_dcdb -	Prepares a direct cdb (DCDB) command
  * @instance:		Adapter soft state
@@ -508,8 +548,6 @@ static int
 megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
 		   struct megasas_cmd *cmd)
 {
-	u32 sge_sz;
-	int sge_bytes;
 	u32 is_logical;
 	u32 device_id;
 	u16 flags = 0;
@@ -544,9 +582,6 @@ megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
 	/*
 	 * Construct SGL
 	 */
-	sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
-	    sizeof(struct megasas_sge32);
-
 	if (IS_DMA64) {
 		pthru->flags |= MFI_FRAME_SGL64;
 		pthru->sge_count = megasas_make_sgl64(instance, scp,
@@ -562,17 +597,11 @@ megasas_build_dcdb(struct megasas_instance *instance, struct scsi_cmnd *scp,
 	pthru->sense_buf_phys_addr_hi = 0;
 	pthru->sense_buf_phys_addr_lo = cmd->sense_phys_addr;
 
-	sge_bytes = sge_sz * pthru->sge_count;
-
 	/*
 	 * Compute the total number of frames this command consumes. FW uses
 	 * this number to pull sufficient number of frames from host memory.
 	 */
-	cmd->frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) +
-	    ((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) + 1;
-
-	if (cmd->frame_count > 7)
-		cmd->frame_count = 8;
+	cmd->frame_count = megasas_get_frame_count(pthru->sge_count);
 
 	return cmd->frame_count;
 }
@@ -589,8 +618,6 @@ static int
 megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
 		   struct megasas_cmd *cmd)
 {
-	u32 sge_sz;
-	int sge_bytes;
 	u32 device_id;
 	u8 sc = scp->cmnd[0];
 	u16 flags = 0;
@@ -605,7 +632,7 @@ megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
 		flags = MFI_FRAME_DIR_READ;
 
 	/*
-	 * Preare the Logical IO frame: 2nd bit is zero for all read cmds
+	 * Prepare the Logical IO frame: 2nd bit is zero for all read cmds
 	 */
 	ldio->cmd = (sc & 0x02) ? MFI_CMD_LD_WRITE : MFI_CMD_LD_READ;
 	ldio->cmd_status = 0x0;
@@ -674,9 +701,6 @@ megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
 	/*
 	 * Construct SGL
 	 */
-	sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
-	    sizeof(struct megasas_sge32);
-
 	if (IS_DMA64) {
 		ldio->flags |= MFI_FRAME_SGL64;
 		ldio->sge_count = megasas_make_sgl64(instance, scp, &ldio->sgl);
@@ -690,13 +714,11 @@ megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
 	ldio->sense_buf_phys_addr_hi = 0;
 	ldio->sense_buf_phys_addr_lo = cmd->sense_phys_addr;
 
-	sge_bytes = sge_sz * ldio->sge_count;
-
-	cmd->frame_count = (sge_bytes / MEGAMFI_FRAME_SIZE) +
-	    ((sge_bytes % MEGAMFI_FRAME_SIZE) ? 1 : 0) + 1;
-
-	if (cmd->frame_count > 7)
-		cmd->frame_count = 8;
+	/*
+	 * Compute the total number of frames this command consumes. FW uses
+	 * this number to pull sufficient number of frames from host memory.
+	 */
+	cmd->frame_count = megasas_get_frame_count(ldio->sge_count);
 
 	return cmd->frame_count;
 }