Merge 'akpm' patch series

* Merge akpm patch series: (122 commits)
  drivers/connector/cn_proc.c: remove unused local
  Documentation/SubmitChecklist: add RCU debug config options
  reiserfs: use hweight_long()
  reiserfs: use proper little-endian bitops
  pnpacpi: register disabled resources
  drivers/rtc/rtc-tegra.c: properly initialize spinlock
  drivers/rtc/rtc-twl.c: check return value of twl_rtc_write_u8() in twl_rtc_set_time()
  drivers/rtc: add support for Qualcomm PMIC8xxx RTC
  drivers/rtc/rtc-s3c.c: support clock gating
  drivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200
  init: skip calibration delay if previously done
  misc/eeprom: add eeprom access driver for digsy_mtc board
  misc/eeprom: add driver for microwire 93xx46 EEPROMs
  checkpatch.pl: update $logFunctions
  checkpatch: make utf-8 test --strict
  checkpatch.pl: add ability to ignore various messages
  checkpatch: add a "prefer __aligned" check
  checkpatch: validate signature styles and To: and Cc: lines
  checkpatch: add __rcu as a sparse modifier
  checkpatch: suggest using min_t or max_t
  ...

Did this as a merge because of (trivial) conflicts in
 - Documentation/feature-removal-schedule.txt
 - arch/xtensa/include/asm/uaccess.h
that were just easier to fix up in the merge than in the patch series.

38 files changed, 2706 insertions, 98 deletions

diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index b02c4ffa4db..0a9a774a7e1 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -1642,13 +1642,12 @@ static int sata_dwc_probe(struct platform_device *ofdev)
 	const struct ata_port_info *ppi[] = { &pi, NULL };
 
 	/* Allocate DWC SATA device */
-	hsdev = kmalloc(sizeof(*hsdev), GFP_KERNEL);
+	hsdev = kzalloc(sizeof(*hsdev), GFP_KERNEL);
 	if (hsdev == NULL) {
 		dev_err(&ofdev->dev, "kmalloc failed for hsdev\n");
 		err = -ENOMEM;
 		goto error;
 	}
-	memset(hsdev, 0, sizeof(*hsdev));
 
 	/* Ioremap SATA registers */
 	base = of_iomap(ofdev->dev.of_node, 0);
diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c
index 281902d3f7e..0debc17c8e2 100644
--- a/drivers/connector/cn_proc.c
+++ b/drivers/connector/cn_proc.c
@@ -173,7 +173,6 @@ void proc_ptrace_connector(struct task_struct *task, int ptrace_id)
 	struct proc_event *ev;
 	struct timespec ts;
 	__u8 buffer[CN_PROC_MSG_SIZE];
-	struct task_struct *tracer;
 
 	if (atomic_read(&proc_event_num_listeners) < 1)
 		return;
diff --git a/drivers/eisa/pci_eisa.c b/drivers/eisa/pci_eisa.c
index 0dd0f633b18..30da70d06a6 100644
--- a/drivers/eisa/pci_eisa.c
+++ b/drivers/eisa/pci_eisa.c
@@ -45,13 +45,13 @@ static int __init pci_eisa_init(struct pci_dev *pdev,
 	return 0;
 }
 
-static struct pci_device_id pci_eisa_pci_tbl[] = {
+static struct pci_device_id __initdata pci_eisa_pci_tbl[] = {
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_BRIDGE_EISA << 8, 0xffff00, 0 },
 	{ 0, }
 };
 
-static struct pci_driver pci_eisa_driver = {
+static struct pci_driver __initdata pci_eisa_driver = {
 	.name		= "pci_eisa",
 	.id_table	= pci_eisa_pci_tbl,
 	.probe		= pci_eisa_init,
diff --git a/drivers/firmware/sigma.c b/drivers/firmware/sigma.c
index c19cd2c39fa..f10fc521951 100644
--- a/drivers/firmware/sigma.c
+++ b/drivers/firmware/sigma.c
@@ -11,6 +11,7 @@
 #include <linux/firmware.h>
 #include <linux/kernel.h>
 #include <linux/i2c.h>
+#include <linux/module.h>
 #include <linux/sigma.h>
 
 /* Return: 0==OK, <0==error, =1 ==no more actions */
@@ -113,3 +114,5 @@ int process_sigma_firmware(struct i2c_client *client, const char *name)
 	return ret;
 }
 EXPORT_SYMBOL(process_sigma_firmware);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/drm_scatter.c b/drivers/gpu/drm/drm_scatter.c
index d15e09b0ae0..7525e0311e5 100644
--- a/drivers/gpu/drm/drm_scatter.c
+++ b/drivers/gpu/drm/drm_scatter.c
@@ -83,30 +83,26 @@ int drm_sg_alloc(struct drm_device *dev, struct drm_scatter_gather * request)
 	if (dev->sg)
 		return -EINVAL;
 
-	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
 	if (!entry)
 		return -ENOMEM;
 
-	memset(entry, 0, sizeof(*entry));
 	pages = (request->size + PAGE_SIZE - 1) / PAGE_SIZE;
 	DRM_DEBUG("size=%ld pages=%ld\n", request->size, pages);
 
 	entry->pages = pages;
-	entry->pagelist = kmalloc(pages * sizeof(*entry->pagelist), GFP_KERNEL);
+	entry->pagelist = kcalloc(pages, sizeof(*entry->pagelist), GFP_KERNEL);
 	if (!entry->pagelist) {
 		kfree(entry);
 		return -ENOMEM;
 	}
 
-	memset(entry->pagelist, 0, pages * sizeof(*entry->pagelist));
-
-	entry->busaddr = kmalloc(pages * sizeof(*entry->busaddr), GFP_KERNEL);
+	entry->busaddr = kcalloc(pages, sizeof(*entry->busaddr), GFP_KERNEL);
 	if (!entry->busaddr) {
 		kfree(entry->pagelist);
 		kfree(entry);
 		return -ENOMEM;
 	}
-	memset((void *)entry->busaddr, 0, pages * sizeof(*entry->busaddr));
 
 	entry->virtual = drm_vmalloc_dma(pages << PAGE_SHIFT);
 	if (!entry->virtual) {
diff --git a/drivers/gpu/drm/radeon/radeon_mem.c b/drivers/gpu/drm/radeon/radeon_mem.c
index ed95155c4b1..988548efea9 100644
--- a/drivers/gpu/drm/radeon/radeon_mem.c
+++ b/drivers/gpu/drm/radeon/radeon_mem.c
@@ -139,7 +139,7 @@ static int init_heap(struct mem_block **heap, int start, int size)
 	if (!blocks)
 		return -ENOMEM;
 
-	*heap = kmalloc(sizeof(**heap), GFP_KERNEL);
+	*heap = kzalloc(sizeof(**heap), GFP_KERNEL);
 	if (!*heap) {
 		kfree(blocks);
 		return -ENOMEM;
@@ -150,7 +150,6 @@ static int init_heap(struct mem_block **heap, int start, int size)
 	blocks->file_priv = NULL;
 	blocks->next = blocks->prev = *heap;
 
-	memset(*heap, 0, sizeof(**heap));
 	(*heap)->file_priv = (struct drm_file *) - 1;
 	(*heap)->next = (*heap)->prev = blocks;
 	return 0;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
index f1a52f9e729..07ce02da78a 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
@@ -585,11 +585,10 @@ int vmw_overlay_init(struct vmw_private *dev_priv)
 		return -ENOSYS;
 	}
 
-	overlay = kmalloc(sizeof(*overlay), GFP_KERNEL);
+	overlay = kzalloc(sizeof(*overlay), GFP_KERNEL);
 	if (!overlay)
 		return -ENOMEM;
 
-	memset(overlay, 0, sizeof(*overlay));
 	mutex_init(&overlay->mutex);
 	for (i = 0; i < VMW_MAX_NUM_STREAMS; i++) {
 		overlay->stream[i].buf = NULL;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index 5408b1b7996..bfe1bcce7f8 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -612,11 +612,9 @@ int vmw_surface_define_ioctl(struct drm_device *dev, void *data,
 	    srf->sizes[0].height == 64 &&
 	    srf->format == SVGA3D_A8R8G8B8) {
 
-		srf->snooper.image = kmalloc(64 * 64 * 4, GFP_KERNEL);
-		/* clear the image */
-		if (srf->snooper.image) {
-			memset(srf->snooper.image, 0x00, 64 * 64 * 4);
-		} else {
+		/* allocate image area and clear it */
+		srf->snooper.image = kzalloc(64 * 64 * 4, GFP_KERNEL);
+		if (!srf->snooper.image) {
 			DRM_ERROR("Failed to allocate cursor_image\n");
 			ret = -ENOMEM;
 			goto out_err1;
diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index 8a1021f2e31..c72f1c0b5e6 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -1171,10 +1171,9 @@ static int vga_arb_open(struct inode *inode, struct file *file)
 
 	pr_debug("%s\n", __func__);
 
-	priv = kmalloc(sizeof(struct vga_arb_private), GFP_KERNEL);
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (priv == NULL)
 		return -ENOMEM;
-	memset(priv, 0, sizeof(*priv));
 	spin_lock_init(&priv->lock);
 	file->private_data = priv;
 
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 6c21c2986ca..b591e726a6f 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -365,6 +365,7 @@ config LEDS_NS2
 config LEDS_NETXBIG
 	tristate "LED support for Big Network series LEDs"
 	depends on MACH_NET2BIG_V2 || MACH_NET5BIG_V2
+	depends on LEDS_CLASS
 	default y
 	help
 	  This option enable support for LEDs found on the LaCie 2Big
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index 4d7ce7631ac..3dd7090a9a9 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -68,17 +68,16 @@
 #define LM3530_ALS2_IMP_SHIFT		(4)
 
 /* Zone Boundary Register defaults */
-#define LM3530_DEF_ZB_0			(0x33)
-#define LM3530_DEF_ZB_1			(0x66)
-#define LM3530_DEF_ZB_2			(0x99)
-#define LM3530_DEF_ZB_3			(0xCC)
+#define LM3530_ALS_ZB_MAX		(4)
+#define LM3530_ALS_WINDOW_mV		(1000)
+#define LM3530_ALS_OFFSET_mV		(4)
 
 /* Zone Target Register defaults */
-#define LM3530_DEF_ZT_0			(0x19)
-#define LM3530_DEF_ZT_1			(0x33)
+#define LM3530_DEF_ZT_0			(0x7F)
+#define LM3530_DEF_ZT_1			(0x66)
 #define LM3530_DEF_ZT_2			(0x4C)
-#define LM3530_DEF_ZT_3			(0x66)
-#define LM3530_DEF_ZT_4			(0x7F)
+#define LM3530_DEF_ZT_3			(0x33)
+#define LM3530_DEF_ZT_4			(0x19)
 
 struct lm3530_mode_map {
 	const char *mode;
@@ -150,6 +149,8 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
 	u8 als_imp_sel = 0;
 	u8 brightness;
 	u8 reg_val[LM3530_REG_MAX];
+	u8 zones[LM3530_ALS_ZB_MAX];
+	u32 als_vmin, als_vmax, als_vstep;
 	struct lm3530_platform_data *pltfm = drvdata->pdata;
 	struct i2c_client *client = drvdata->client;
 
@@ -161,6 +162,26 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
 		gen_config |= (LM3530_ENABLE_I2C);
 
 	if (drvdata->mode == LM3530_BL_MODE_ALS) {
+		if (pltfm->als_vmax == 0) {
+			pltfm->als_vmin = als_vmin = 0;
+			pltfm->als_vmin = als_vmax = LM3530_ALS_WINDOW_mV;
+		}
+
+		als_vmin = pltfm->als_vmin;
+		als_vmax = pltfm->als_vmax;
+
+		if ((als_vmax - als_vmin) > LM3530_ALS_WINDOW_mV)
+			pltfm->als_vmax = als_vmax =
+				als_vmin + LM3530_ALS_WINDOW_mV;
+
+		/* n zone boundary makes n+1 zones */
+		als_vstep = (als_vmax - als_vmin) / (LM3530_ALS_ZB_MAX + 1);
+
+		for (i = 0; i < LM3530_ALS_ZB_MAX; i++)
+			zones[i] = (((als_vmin + LM3530_ALS_OFFSET_mV) +
+					als_vstep + (i * als_vstep)) * LED_FULL)
+					/ 1000;
+
 		als_config =
 			(pltfm->als_avrg_time << LM3530_ALS_AVG_TIME_SHIFT) |
 			(LM3530_ENABLE_ALS) |
@@ -169,6 +190,7 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
 		als_imp_sel =
 			(pltfm->als1_resistor_sel << LM3530_ALS1_IMP_SHIFT) |
 			(pltfm->als2_resistor_sel << LM3530_ALS2_IMP_SHIFT);
+
 	}
 
 	if (drvdata->mode == LM3530_BL_MODE_PWM)
@@ -190,10 +212,10 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
 	reg_val[3] = 0x00;		/* LM3530_ALS_ZONE_REG */
 	reg_val[4] = als_imp_sel;	/* LM3530_ALS_IMP_SELECT */
 	reg_val[5] = brightness;	/* LM3530_BRT_CTRL_REG */
-	reg_val[6] = LM3530_DEF_ZB_0;	/* LM3530_ALS_ZB0_REG */
-	reg_val[7] = LM3530_DEF_ZB_1;	/* LM3530_ALS_ZB1_REG */
-	reg_val[8] = LM3530_DEF_ZB_2;	/* LM3530_ALS_ZB2_REG */
-	reg_val[9] = LM3530_DEF_ZB_3;	/* LM3530_ALS_ZB3_REG */
+	reg_val[6] = zones[0];		/* LM3530_ALS_ZB0_REG */
+	reg_val[7] = zones[1];		/* LM3530_ALS_ZB1_REG */
+	reg_val[8] = zones[2];		/* LM3530_ALS_ZB2_REG */
+	reg_val[9] = zones[3];		/* LM3530_ALS_ZB3_REG */
 	reg_val[10] = LM3530_DEF_ZT_0;	/* LM3530_ALS_Z0T_REG */
 	reg_val[11] = LM3530_DEF_ZT_1;	/* LM3530_ALS_Z1T_REG */
 	reg_val[12] = LM3530_DEF_ZT_2;	/* LM3530_ALS_Z2T_REG */
@@ -265,6 +287,24 @@ static void lm3530_brightness_set(struct led_classdev *led_cdev,
 	}
 }
 
+static ssize_t lm3530_mode_get(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = container_of(
+					dev->parent, struct i2c_client, dev);
+	struct lm3530_data *drvdata = i2c_get_clientdata(client);
+	int i, len = 0;
+
+	for (i = 0; i < ARRAY_SIZE(mode_map); i++)
+		if (drvdata->mode == mode_map[i].mode_val)
+			len += sprintf(buf + len, "[%s] ", mode_map[i].mode);
+		else
+			len += sprintf(buf + len, "%s ", mode_map[i].mode);
+
+	len += sprintf(buf + len, "\n");
+
+	return len;
+}
 
 static ssize_t lm3530_mode_set(struct device *dev, struct device_attribute
 				   *attr, const char *buf, size_t size)
@@ -298,8 +338,7 @@ static ssize_t lm3530_mode_set(struct device *dev, struct device_attribute
 
 	return sizeof(drvdata->mode);
 }
-
-static DEVICE_ATTR(mode, 0644, NULL, lm3530_mode_set);
+static DEVICE_ATTR(mode, 0644, lm3530_mode_get, lm3530_mode_set);
 
 static int __devinit lm3530_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index cc1dc4817fa..9fc122c81f0 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -744,7 +744,7 @@ fail1:
 	return ret;
 }
 
-static int lp5521_remove(struct i2c_client *client)
+static int __devexit lp5521_remove(struct i2c_client *client)
 {
 	struct lp5521_chip *chip = i2c_get_clientdata(client);
 	int i;
@@ -775,7 +775,7 @@ static struct i2c_driver lp5521_driver = {
 		.name	= "lp5521",
 	},
 	.probe		= lp5521_probe,
-	.remove		= lp5521_remove,
+	.remove		= __devexit_p(lp5521_remove),
 	.id_table	= lp5521_id,
 };
 
diff --git a/drivers/leds/leds-sunfire.c b/drivers/leds/leds-sunfire.c
index ab6d18f5c39..1757396b20b 100644
--- a/drivers/leds/leds-sunfire.c
+++ b/drivers/leds/leds-sunfire.c
@@ -127,17 +127,19 @@ static int __devinit sunfire_led_generic_probe(struct platform_device *pdev,
 					       struct led_type *types)
 {
 	struct sunfire_drvdata *p;
-	int i, err = -EINVAL;
+	int i, err;
 
 	if (pdev->num_resources != 1) {
 		printk(KERN_ERR PFX "Wrong number of resources %d, should be 1\n",
 		       pdev->num_resources);
+		err = -EINVAL;
 		goto out;
 	}
 
 	p = kzalloc(sizeof(*p), GFP_KERNEL);
 	if (!p) {
 		printk(KERN_ERR PFX "Could not allocate struct sunfire_drvdata\n");
+		err = -ENOMEM;
 		goto out;
 	}
 
@@ -160,14 +162,14 @@ static int __devinit sunfire_led_generic_probe(struct platform_device *pdev,
 
 	dev_set_drvdata(&pdev->dev, p);
 
-	err = 0;
-out:
-	return err;
+	return 0;
 
 out_unregister_led_cdevs:
 	for (i--; i >= 0; i--)
 		led_classdev_unregister(&p->leds[i].led_cdev);
-	goto out;
+	kfree(p);
+out:
+	return err;
 }
 
 static int __devexit sunfire_led_generic_remove(struct platform_device *pdev)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4e349cd98bc..0a4d86c6c4a 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -245,8 +245,7 @@ config SGI_XP
 
 config CS5535_MFGPT
 	tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
-	depends on PCI
-	depends on X86
+	depends on PCI && X86 && MFD_CS5535
 	default n
 	help
 	  This driver provides access to MFGPT functionality for other
@@ -490,6 +489,15 @@ config PCH_PHUB
 	  To compile this driver as a module, choose M here: the module will
 	  be called pch_phub.
 
+config USB_SWITCH_FSA9480
+	tristate "FSA9480 USB Switch"
+	depends on I2C
+	help
+	  The FSA9480 is a USB port accessory detector and switch.
+	  The FSA9480 is fully controlled using I2C and enables USB data,
+	  stereo and mono audio, video, microphone and UART data to use
+	  a common connector port.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 5f03172cc0b..33282157bc3 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -46,3 +46,4 @@ obj-y				+= ti-st/
 obj-$(CONFIG_AB8500_PWM)	+= ab8500-pwm.o
 obj-y				+= lis3lv02d/
 obj-y				+= carma/
+obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 9118613af32..26cf12ca7f5 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -70,4 +70,29 @@ config EEPROM_93CX6
 
 	  If unsure, say N.
 
+config EEPROM_93XX46
+	tristate "Microwire EEPROM 93XX46 support"
+	depends on SPI && SYSFS
+	help
+	  Driver for the microwire EEPROM chipsets 93xx46x. The driver
+	  supports both read and write commands and also the command to
+	  erase the whole EEPROM.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called eeprom_93xx46.
+
+	  If unsure, say N.
+
+config EEPROM_DIGSY_MTC_CFG
+	bool "DigsyMTC display configuration EEPROMs device"
+	depends on PPC_MPC5200_GPIO && GPIOLIB && SPI_GPIO
+	help
+	  This option enables access to display configuration EEPROMs
+	  on digsy_mtc board. You have to additionally select Microwire
+	  EEPROM 93XX46 driver. sysfs entries will be created for that
+	  EEPROM allowing to read/write the configuration data or to
+	  erase the whole EEPROM.
+
+	  If unsure, say N.
+
 endmenu
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
index df3d68ffa9d..fc1e81d2926 100644
--- a/drivers/misc/eeprom/Makefile
+++ b/drivers/misc/eeprom/Makefile
@@ -3,3 +3,5 @@ obj-$(CONFIG_EEPROM_AT25)	+= at25.o
 obj-$(CONFIG_EEPROM_LEGACY)	+= eeprom.o
 obj-$(CONFIG_EEPROM_MAX6875)	+= max6875.o
 obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
+obj-$(CONFIG_EEPROM_93XX46)	+= eeprom_93xx46.o
+obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o
diff --git a/drivers/misc/eeprom/digsy_mtc_eeprom.c b/drivers/misc/eeprom/digsy_mtc_eeprom.c
new file mode 100644
index 00000000000..66d9e1baeae
--- /dev/null
+++ b/drivers/misc/eeprom/digsy_mtc_eeprom.c
@@ -0,0 +1,85 @@
+/*
+ * EEPROMs access control driver for display configuration EEPROMs
+ * on DigsyMTC board.
+ *
+ * (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/eeprom_93xx46.h>
+
+#define GPIO_EEPROM_CLK		216
+#define GPIO_EEPROM_CS		210
+#define GPIO_EEPROM_DI		217
+#define GPIO_EEPROM_DO		249
+#define GPIO_EEPROM_OE		255
+#define EE_SPI_BUS_NUM	1
+
+static void digsy_mtc_op_prepare(void *p)
+{
+	/* enable */
+	gpio_set_value(GPIO_EEPROM_OE, 0);
+}
+
+static void digsy_mtc_op_finish(void *p)
+{
+	/* disable */
+	gpio_set_value(GPIO_EEPROM_OE, 1);
+}
+
+struct eeprom_93xx46_platform_data digsy_mtc_eeprom_data = {
+	.flags		= EE_ADDR8,
+	.prepare	= digsy_mtc_op_prepare,
+	.finish		= digsy_mtc_op_finish,
+};
+
+static struct spi_gpio_platform_data eeprom_spi_gpio_data = {
+	.sck		= GPIO_EEPROM_CLK,
+	.mosi		= GPIO_EEPROM_DI,
+	.miso		= GPIO_EEPROM_DO,
+	.num_chipselect	= 1,
+};
+
+static struct platform_device digsy_mtc_eeprom = {
+	.name	= "spi_gpio",
+	.id	= EE_SPI_BUS_NUM,
+	.dev	= {
+		.platform_data	= &eeprom_spi_gpio_data,
+	},
+};
+
+static struct spi_board_info digsy_mtc_eeprom_info[] __initdata = {
+	{
+		.modalias		= "93xx46",
+		.max_speed_hz		= 1000000,
+		.bus_num		= EE_SPI_BUS_NUM,
+		.chip_select		= 0,
+		.mode			= SPI_MODE_0,
+		.controller_data	= (void *)GPIO_EEPROM_CS,
+		.platform_data		= &digsy_mtc_eeprom_data,
+	},
+};
+
+static int __init digsy_mtc_eeprom_devices_init(void)
+{
+	int ret;
+
+	ret = gpio_request_one(GPIO_EEPROM_OE, GPIOF_OUT_INIT_HIGH,
+				"93xx46 EEPROMs OE");
+	if (ret) {
+		pr_err("can't request gpio %d\n", GPIO_EEPROM_OE);
+		return ret;
+	}
+	spi_register_board_info(digsy_mtc_eeprom_info,
+				ARRAY_SIZE(digsy_mtc_eeprom_info));
+	return platform_device_register(&digsy_mtc_eeprom);
+}
+device_initcall(digsy_mtc_eeprom_devices_init);
diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
new file mode 100644
index 00000000000..0c7ebb1e19e
--- /dev/null
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -0,0 +1,410 @@
+/*
+ * Driver for 93xx46 EEPROMs
+ *
+ * (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/sysfs.h>
+#include <linux/eeprom_93xx46.h>
+
+#define OP_START	0x4
+#define OP_WRITE	(OP_START | 0x1)
+#define OP_READ		(OP_START | 0x2)
+#define ADDR_EWDS	0x00
+#define ADDR_ERAL	0x20
+#define ADDR_EWEN	0x30
+
+struct eeprom_93xx46_dev {
+	struct spi_device *spi;
+	struct eeprom_93xx46_platform_data *pdata;
+	struct bin_attribute bin;
+	struct mutex lock;
+	int addrlen;
+};
+
+static ssize_t
+eeprom_93xx46_bin_read(struct file *filp, struct kobject *kobj,
+		       struct bin_attribute *bin_attr,
+		       char *buf, loff_t off, size_t count)
+{
+	struct eeprom_93xx46_dev *edev;
+	struct device *dev;
+	struct spi_message m;
+	struct spi_transfer t[2];
+	int bits, ret;
+	u16 cmd_addr;
+
+	dev = container_of(kobj, struct device, kobj);
+	edev = dev_get_drvdata(dev);
+
+	if (unlikely(off >= edev->bin.size))
+		return 0;
+	if ((off + count) > edev->bin.size)
+		count = edev->bin.size - off;
+	if (unlikely(!count))
+		return count;
+
+	cmd_addr = OP_READ << edev->addrlen;
+
+	if (edev->addrlen == 7) {
+		cmd_addr |= off & 0x7f;
+		bits = 10;
+	} else {
+		cmd_addr |= off & 0x3f;
+		bits = 9;
+	}
+
+	dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n",
+		cmd_addr, edev->spi->max_speed_hz);
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = (char *)&cmd_addr;
+	t[0].len = 2;
+	t[0].bits_per_word = bits;
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].rx_buf = buf;
+	t[1].len = count;
+	t[1].bits_per_word = 8;
+	spi_message_add_tail(&t[1], &m);
+
+	mutex_lock(&edev->lock);
+
+	if (edev->pdata->prepare)
+		edev->pdata->prepare(edev);
+
+	ret = spi_sync(edev->spi, &m);
+	/* have to wait at least Tcsl ns */
+	ndelay(250);
+	if (ret) {
+		dev_err(&edev->spi->dev, "read %zu bytes at %d: err. %d\n",
+			count, (int)off, ret);
+	}
+
+	if (edev->pdata->finish)
+		edev->pdata->finish(edev);
+
+	mutex_unlock(&edev->lock);
+	return ret ? : count;
+}
+
+static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on)
+{
+	struct spi_message m;
+	struct spi_transfer t;
+	int bits, ret;
+	u16 cmd_addr;
+
+	cmd_addr = OP_START << edev->addrlen;
+	if (edev->addrlen == 7) {
+		cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS) << 1;
+		bits = 10;
+	} else {
+		cmd_addr |= (is_on ? ADDR_EWEN : ADDR_EWDS);
+		bits = 9;
+	}
+
+	dev_dbg(&edev->spi->dev, "ew cmd 0x%04x\n", cmd_addr);
+
+	spi_message_init(&m);
+	memset(&t, 0, sizeof(t));
+
+	t.tx_buf = &cmd_addr;
+	t.len = 2;
+	t.bits_per_word = bits;
+	spi_message_add_tail(&t, &m);
+
+	mutex_lock(&edev->lock);
+
+	if (edev->pdata->prepare)
+		edev->pdata->prepare(edev);
+
+	ret = spi_sync(edev->spi, &m);
+	/* have to wait at least Tcsl ns */
+	ndelay(250);
+	if (ret)
+		dev_err(&edev->spi->dev, "erase/write %sable error %d\n",
+			is_on ? "en" : "dis", ret);
+
+	if (edev->pdata->finish)
+		edev->pdata->finish(edev);
+
+	mutex_unlock(&edev->lock);
+	return ret;
+}
+
+static ssize_t
+eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev,
+			 const char *buf, unsigned off)
+{
+	struct spi_message m;
+	struct spi_transfer t[2];
+	int bits, data_len, ret;
+	u16 cmd_addr;
+
+	cmd_addr = OP_WRITE << edev->addrlen;
+
+	if (edev->addrlen == 7) {
+		cmd_addr |= off & 0x7f;
+		bits = 10;
+		data_len = 1;
+	} else {
+		cmd_addr |= off & 0x3f;
+		bits = 9;
+		data_len = 2;
+	}
+
+	dev_dbg(&edev->spi->dev, "write cmd 0x%x\n", cmd_addr);
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = (char *)&cmd_addr;
+	t[0].len = 2;
+	t[0].bits_per_word = bits;
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].tx_buf = buf;
+	t[1].len = data_len;
+	t[1].bits_per_word = 8;
+	spi_message_add_tail(&t[1], &m);
+
+	ret = spi_sync(edev->spi, &m);
+	/* have to wait program cycle time Twc ms */
+	mdelay(6);
+	return ret;
+}
+
+static ssize_t
+eeprom_93xx46_bin_write(struct file *filp, struct kobject *kobj,
+			struct bin_attribute *bin_attr,
+			char *buf, loff_t off, size_t count)
+{
+	struct eeprom_93xx46_dev *edev;
+	struct device *dev;
+	int i, ret, step = 1;
+
+	dev = container_of(kobj, struct device, kobj);
+	edev = dev_get_drvdata(dev);
+
+	if (unlikely(off >= edev->bin.size))
+		return 0;
+	if ((off + count) > edev->bin.size)
+		count = edev->bin.size - off;
+	if (unlikely(!count))
+		return count;
+
+	/* only write even number of bytes on 16-bit devices */
+	if (edev->addrlen == 6) {
+		step = 2;
+		count &= ~1;
+	}
+
+	/* erase/write enable */
+	ret = eeprom_93xx46_ew(edev, 1);
+	if (ret)
+		return ret;
+
+	mutex_lock(&edev->lock);
+
+	if (edev->pdata->prepare)
+		edev->pdata->prepare(edev);
+
+	for (i = 0; i < count; i += step) {
+		ret = eeprom_93xx46_write_word(edev, &buf[i], off + i);
+		if (ret) {
+			dev_err(&edev->spi->dev, "write failed at %d: %d\n",
+				(int)off + i, ret);
+			break;
+		}
+	}
+
+	if (edev->pdata->finish)
+		edev->pdata->finish(edev);
+
+	mutex_unlock(&edev->lock);
+
+	/* erase/write disable */
+	eeprom_93xx46_ew(edev, 0);
+	return ret ? : count;
+}
+
+static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev)
+{
+	struct eeprom_93xx46_platform_data *pd = edev->pdata;
+	struct spi_message m;
+	struct spi_transfer t;
+	int bits, ret;
+	u16 cmd_addr;
+
+	cmd_addr = OP_START << edev->addrlen;
+	if (edev->addrlen == 7) {
+		cmd_addr |= ADDR_ERAL << 1;
+		bits = 10;
+	} else {
+		cmd_addr |= ADDR_ERAL;
+		bits = 9;
+	}
+
+	spi_message_init(&m);
+	memset(&t, 0, sizeof(t));
+
+	t.tx_buf = &cmd_addr;
+	t.len = 2;
+	t.bits_per_word = bits;
+	spi_message_add_tail(&t, &m);
+
+	mutex_lock(&edev->lock);
+
+	if (edev->pdata->prepare)
+		edev->pdata->prepare(edev);
+
+	ret = spi_sync(edev->spi, &m);
+	if (ret)
+		dev_err(&edev->spi->dev, "erase error %d\n", ret);
+	/* have to wait erase cycle time Tec ms */
+	mdelay(6);
+
+	if (pd->finish)
+		pd->finish(edev);
+
+	mutex_unlock(&edev->lock);
+	return ret;
+}
+
+static ssize_t eeprom_93xx46_store_erase(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	struct eeprom_93xx46_dev *edev = dev_get_drvdata(dev);
+	int erase = 0, ret;
+
+	sscanf(buf, "%d", &erase);
+	if (erase) {
+		ret = eeprom_93xx46_ew(edev, 1);
+		if (ret)
+			return ret;
+		ret = eeprom_93xx46_eral(edev);
+		if (ret)
+			return ret;
+		ret = eeprom_93xx46_ew(edev, 0);
+		if (ret)
+			return ret;
+	}
+	return count;
+}
+static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase);
+
+static int __devinit eeprom_93xx46_probe(struct spi_device *spi)
+{
+	struct eeprom_93xx46_platform_data *pd;
+	struct eeprom_93xx46_dev *edev;
+	int err;
+
+	pd = spi->dev.platform_data;
+	if (!pd) {
+		dev_err(&spi->dev, "missing platform data\n");
+		return -ENODEV;
+	}
+
+	edev = kzalloc(sizeof(*edev), GFP_KERNEL);
+	if (!edev)
+		return -ENOMEM;
+
+	if (pd->flags & EE_ADDR8)
+		edev->addrlen = 7;
+	else if (pd->flags & EE_ADDR16)
+		edev->addrlen = 6;
+	else {
+		dev_err(&spi->dev, "unspecified address type\n");
+		err = -EINVAL;
+		goto fail;
+	}
+
+	mutex_init(&edev->lock);
+
+	edev->spi = spi_dev_get(spi);
+	edev->pdata = pd;
+
+	sysfs_bin_attr_init(&edev->bin);
+	edev->bin.attr.name = "eeprom";
+	edev->bin.attr.mode = S_IRUSR;
+	edev->bin.read = eeprom_93xx46_bin_read;
+	edev->bin.size = 128;
+	if (!(pd->flags & EE_READONLY)) {
+		edev->bin.write = eeprom_93xx46_bin_write;
+		edev->bin.attr.mode |= S_IWUSR;
+	}
+
+	err = sysfs_create_bin_file(&spi->dev.kobj, &edev->bin);
+	if (err)
+		goto fail;
+
+	dev_info(&spi->dev, "%d-bit eeprom %s\n",
+		(pd->flags & EE_ADDR8) ? 8 : 16,
+		(pd->flags & EE_READONLY) ? "(readonly)" : "");
+
+	if (!(pd->flags & EE_READONLY)) {
+		if (device_create_file(&spi->dev, &dev_attr_erase))
+			dev_err(&spi->dev, "can't create erase interface\n");
+	}
+
+	dev_set_drvdata(&spi->dev, edev);
+	return 0;
+fail:
+	kfree(edev);
+	return err;
+}
+
+static int __devexit eeprom_93xx46_remove(struct spi_device *spi)
+{
+	struct eeprom_93xx46_dev *edev = dev_get_drvdata(&spi->dev);
+
+	if (!(edev->pdata->flags & EE_READONLY))
+		device_remove_file(&spi->dev, &dev_attr_erase);
+
+	sysfs_remove_bin_file(&spi->dev.kobj, &edev->bin);
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(edev);
+	return 0;
+}
+
+static struct spi_driver eeprom_93xx46_driver = {
+	.driver = {
+		.name	= "93xx46",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= eeprom_93xx46_probe,
+	.remove		= __devexit_p(eeprom_93xx46_remove),
+};
+
+static int __init eeprom_93xx46_init(void)
+{
+	return spi_register_driver(&eeprom_93xx46_driver);
+}
+module_init(eeprom_93xx46_init);
+
+static void __exit eeprom_93xx46_exit(void)
+{
+	spi_unregister_driver(&eeprom_93xx46_driver);
+}
+module_exit(eeprom_93xx46_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for 93xx46 EEPROMs");
+MODULE_AUTHOR("Anatolij Gustschin <agust@denx.de>");
+MODULE_ALIAS("spi:93xx46");
diff --git a/drivers/misc/fsa9480.c b/drivers/misc/fsa9480.c
new file mode 100644
index 00000000000..5325a7e70dc
--- /dev/null
+++ b/drivers/misc/fsa9480.c
@@ -0,0 +1,557 @@
+/*
+ * fsa9480.c - FSA9480 micro USB switch device driver
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Wonguk Jeong <wonguk.jeong@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/fsa9480.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+
+/* FSA9480 I2C registers */
+#define FSA9480_REG_DEVID		0x01
+#define FSA9480_REG_CTRL		0x02
+#define FSA9480_REG_INT1		0x03
+#define FSA9480_REG_INT2		0x04
+#define FSA9480_REG_INT1_MASK		0x05
+#define FSA9480_REG_INT2_MASK		0x06
+#define FSA9480_REG_ADC			0x07
+#define FSA9480_REG_TIMING1		0x08
+#define FSA9480_REG_TIMING2		0x09
+#define FSA9480_REG_DEV_T1		0x0a
+#define FSA9480_REG_DEV_T2		0x0b
+#define FSA9480_REG_BTN1		0x0c
+#define FSA9480_REG_BTN2		0x0d
+#define FSA9480_REG_CK			0x0e
+#define FSA9480_REG_CK_INT1		0x0f
+#define FSA9480_REG_CK_INT2		0x10
+#define FSA9480_REG_CK_INTMASK1		0x11
+#define FSA9480_REG_CK_INTMASK2		0x12
+#define FSA9480_REG_MANSW1		0x13
+#define FSA9480_REG_MANSW2		0x14
+
+/* Control */
+#define CON_SWITCH_OPEN		(1 << 4)
+#define CON_RAW_DATA		(1 << 3)
+#define CON_MANUAL_SW		(1 << 2)
+#define CON_WAIT		(1 << 1)
+#define CON_INT_MASK		(1 << 0)
+#define CON_MASK		(CON_SWITCH_OPEN | CON_RAW_DATA | \
+				CON_MANUAL_SW | CON_WAIT)
+
+/* Device Type 1 */
+#define DEV_USB_OTG		(1 << 7)
+#define DEV_DEDICATED_CHG	(1 << 6)
+#define DEV_USB_CHG		(1 << 5)
+#define DEV_CAR_KIT		(1 << 4)
+#define DEV_UART		(1 << 3)
+#define DEV_USB			(1 << 2)
+#define DEV_AUDIO_2		(1 << 1)
+#define DEV_AUDIO_1		(1 << 0)
+
+#define DEV_T1_USB_MASK		(DEV_USB_OTG | DEV_USB)
+#define DEV_T1_UART_MASK	(DEV_UART)
+#define DEV_T1_CHARGER_MASK	(DEV_DEDICATED_CHG | DEV_USB_CHG)
+
+/* Device Type 2 */
+#define DEV_AV			(1 << 6)
+#define DEV_TTY			(1 << 5)
+#define DEV_PPD			(1 << 4)
+#define DEV_JIG_UART_OFF	(1 << 3)
+#define DEV_JIG_UART_ON		(1 << 2)
+#define DEV_JIG_USB_OFF		(1 << 1)
+#define DEV_JIG_USB_ON		(1 << 0)
+
+#define DEV_T2_USB_MASK		(DEV_JIG_USB_OFF | DEV_JIG_USB_ON)
+#define DEV_T2_UART_MASK	(DEV_JIG_UART_OFF | DEV_JIG_UART_ON)
+#define DEV_T2_JIG_MASK		(DEV_JIG_USB_OFF | DEV_JIG_USB_ON | \
+				DEV_JIG_UART_OFF | DEV_JIG_UART_ON)
+
+/*
+ * Manual Switch
+ * D- [7:5] / D+ [4:2]
+ * 000: Open all / 001: USB / 010: AUDIO / 011: UART / 100: V_AUDIO
+ */
+#define SW_VAUDIO		((4 << 5) | (4 << 2))
+#define SW_UART			((3 << 5) | (3 << 2))
+#define SW_AUDIO		((2 << 5) | (2 << 2))
+#define SW_DHOST		((1 << 5) | (1 << 2))
+#define SW_AUTO			((0 << 5) | (0 << 2))
+
+/* Interrupt 1 */
+#define INT_DETACH		(1 << 1)
+#define INT_ATTACH		(1 << 0)
+
+struct fsa9480_usbsw {
+	struct i2c_client		*client;
+	struct fsa9480_platform_data	*pdata;
+	int				dev1;
+	int				dev2;
+	int				mansw;
+};
+
+static struct fsa9480_usbsw *chip;
+
+static int fsa9480_write_reg(struct i2c_client *client,
+		int reg, int value)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, reg, value);
+
+	if (ret < 0)
+		dev_err(&client->dev, "%s: err %d\n", __func__, ret);
+
+	return ret;
+}
+
+static int fsa9480_read_reg(struct i2c_client *client, int reg)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+
+	if (ret < 0)
+		dev_err(&client->dev, "%s: err %d\n", __func__, ret);
+
+	return ret;
+}
+
+static int fsa9480_read_irq(struct i2c_client *client, int *value)
+{
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(client,
+			FSA9480_REG_INT1, 2, (u8 *)value);
+	*value &= 0xffff;
+
+	if (ret < 0)
+		dev_err(&client->dev, "%s: err %d\n", __func__, ret);
+
+	return ret;
+}
+
+static void fsa9480_set_switch(const char *buf)
+{
+	struct fsa9480_usbsw *usbsw = chip;
+	struct i2c_client *client = usbsw->client;
+	unsigned int value;
+	unsigned int path = 0;
+
+	value = fsa9480_read_reg(client, FSA9480_REG_CTRL);
+
+	if (!strncmp(buf, "VAUDIO", 6)) {
+		path = SW_VAUDIO;
+		value &= ~CON_MANUAL_SW;
+	} else if (!strncmp(buf, "UART", 4)) {
+		path = SW_UART;
+		value &= ~CON_MANUAL_SW;
+	} else if (!strncmp(buf, "AUDIO", 5)) {
+		path = SW_AUDIO;
+		value &= ~CON_MANUAL_SW;
+	} else if (!strncmp(buf, "DHOST", 5)) {
+		path = SW_DHOST;
+		value &= ~CON_MANUAL_SW;
+	} else if (!strncmp(buf, "AUTO", 4)) {
+		path = SW_AUTO;
+		value |= CON_MANUAL_SW;
+	} else {
+		printk(KERN_ERR "Wrong command\n");
+		return;
+	}
+
+	usbsw->mansw = path;
+	fsa9480_write_reg(client, FSA9480_REG_MANSW1, path);
+	fsa9480_write_reg(client, FSA9480_REG_CTRL, value);
+}
+
+static ssize_t fsa9480_get_switch(char *buf)
+{
+	struct fsa9480_usbsw *usbsw = chip;
+	struct i2c_client *client = usbsw->client;
+	unsigned int value;
+
+	value = fsa9480_read_reg(client, FSA9480_REG_MANSW1);
+
+	if (value == SW_VAUDIO)
+		return sprintf(buf, "VAUDIO\n");
+	else if (value == SW_UART)
+		return sprintf(buf, "UART\n");
+	else if (value == SW_AUDIO)
+		return sprintf(buf, "AUDIO\n");
+	else if (value == SW_DHOST)
+		return sprintf(buf, "DHOST\n");
+	else if (value == SW_AUTO)
+		return sprintf(buf, "AUTO\n");
+	else
+		return sprintf(buf, "%x", value);
+}
+
+static ssize_t fsa9480_show_device(struct device *dev,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	struct fsa9480_usbsw *usbsw = dev_get_drvdata(dev);
+	struct i2c_client *client = usbsw->client;
+	int dev1, dev2;
+
+	dev1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
+	dev2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
+
+	if (!dev1 && !dev2)
+		return sprintf(buf, "NONE\n");
+
+	/* USB */
+	if (dev1 & DEV_T1_USB_MASK || dev2 & DEV_T2_USB_MASK)
+		return sprintf(buf, "USB\n");
+
+	/* UART */
+	if (dev1 & DEV_T1_UART_MASK || dev2 & DEV_T2_UART_MASK)
+		return sprintf(buf, "UART\n");
+
+	/* CHARGER */
+	if (dev1 & DEV_T1_CHARGER_MASK)
+		return sprintf(buf, "CHARGER\n");
+
+	/* JIG */
+	if (dev2 & DEV_T2_JIG_MASK)
+		return sprintf(buf, "JIG\n");
+
+	return sprintf(buf, "UNKNOWN\n");
+}
+
+static ssize_t fsa9480_show_manualsw(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	return fsa9480_get_switch(buf);
+
+}
+
+static ssize_t fsa9480_set_manualsw(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	fsa9480_set_switch(buf);
+
+	return count;
+}
+
+static DEVICE_ATTR(device, S_IRUGO, fsa9480_show_device, NULL);
+static DEVICE_ATTR(switch, S_IRUGO | S_IWUSR,
+		fsa9480_show_manualsw, fsa9480_set_manualsw);
+
+static struct attribute *fsa9480_attributes[] = {
+	&dev_attr_device.attr,
+	&dev_attr_switch.attr,
+	NULL
+};
+
+static const struct attribute_group fsa9480_group = {
+	.attrs = fsa9480_attributes,
+};
+
+static void fsa9480_detect_dev(struct fsa9480_usbsw *usbsw, int intr)
+{
+	int val1, val2, ctrl;
+	struct fsa9480_platform_data *pdata = usbsw->pdata;
+	struct i2c_client *client = usbsw->client;
+
+	val1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
+	val2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
+	ctrl = fsa9480_read_reg(client, FSA9480_REG_CTRL);
+
+	dev_info(&client->dev, "intr: 0x%x, dev1: 0x%x, dev2: 0x%x\n",
+			intr, val1, val2);
+
+	if (!intr)
+		goto out;
+
+	if (intr & INT_ATTACH) {	/* Attached */
+		/* USB */
+		if (val1 & DEV_T1_USB_MASK || val2 & DEV_T2_USB_MASK) {
+			if (pdata->usb_cb)
+				pdata->usb_cb(FSA9480_ATTACHED);
+
+			if (usbsw->mansw) {
+				fsa9480_write_reg(client,
+					FSA9480_REG_MANSW1, usbsw->mansw);
+			}
+		}
+
+		/* UART */
+		if (val1 & DEV_T1_UART_MASK || val2 & DEV_T2_UART_MASK) {
+			if (pdata->uart_cb)
+				pdata->uart_cb(FSA9480_ATTACHED);
+
+			if (!(ctrl & CON_MANUAL_SW)) {
+				fsa9480_write_reg(client,
+					FSA9480_REG_MANSW1, SW_UART);
+			}
+		}
+
+		/* CHARGER */
+		if (val1 & DEV_T1_CHARGER_MASK) {
+			if (pdata->charger_cb)
+				pdata->charger_cb(FSA9480_ATTACHED);
+		}
+
+		/* JIG */
+		if (val2 & DEV_T2_JIG_MASK) {
+			if (pdata->jig_cb)
+				pdata->jig_cb(FSA9480_ATTACHED);
+		}
+	} else if (intr & INT_DETACH) {	/* Detached */
+		/* USB */
+		if (usbsw->dev1 & DEV_T1_USB_MASK ||
+			usbsw->dev2 & DEV_T2_USB_MASK) {
+			if (pdata->usb_cb)
+				pdata->usb_cb(FSA9480_DETACHED);
+		}
+
+		/* UART */
+		if (usbsw->dev1 & DEV_T1_UART_MASK ||
+			usbsw->dev2 & DEV_T2_UART_MASK) {
+			if (pdata->uart_cb)
+				pdata->uart_cb(FSA9480_DETACHED);
+		}
+
+		/* CHARGER */
+		if (usbsw->dev1 & DEV_T1_CHARGER_MASK) {
+			if (pdata->charger_cb)
+				pdata->charger_cb(FSA9480_DETACHED);
+		}
+
+		/* JIG */
+		if (usbsw->dev2 & DEV_T2_JIG_MASK) {
+			if (pdata->jig_cb)
+				pdata->jig_cb(FSA9480_DETACHED);
+		}
+	}
+
+	usbsw->dev1 = val1;
+	usbsw->dev2 = val2;
+
+out:
+	ctrl &= ~CON_INT_MASK;
+	fsa9480_write_reg(client, FSA9480_REG_CTRL, ctrl);
+}
+
+static irqreturn_t fsa9480_irq_handler(int irq, void *data)
+{
+	struct fsa9480_usbsw *usbsw = data;
+	struct i2c_client *client = usbsw->client;
+	int intr;
+
+	/* clear interrupt */
+	fsa9480_read_irq(client, &intr);
+
+	/* device detection */
+	fsa9480_detect_dev(usbsw, intr);
+
+	return IRQ_HANDLED;
+}
+
+static int fsa9480_irq_init(struct fsa9480_usbsw *usbsw)
+{
+	struct fsa9480_platform_data *pdata = usbsw->pdata;
+	struct i2c_client *client = usbsw->client;
+	int ret;
+	int intr;
+	unsigned int ctrl = CON_MASK;
+
+	/* clear interrupt */
+	fsa9480_read_irq(client, &intr);
+
+	/* unmask interrupt (attach/detach only) */
+	fsa9480_write_reg(client, FSA9480_REG_INT1_MASK, 0xfc);
+	fsa9480_write_reg(client, FSA9480_REG_INT2_MASK, 0x1f);
+
+	usbsw->mansw = fsa9480_read_reg(client, FSA9480_REG_MANSW1);
+
+	if (usbsw->mansw)
+		ctrl &= ~CON_MANUAL_SW;	/* Manual Switching Mode */
+
+	fsa9480_write_reg(client, FSA9480_REG_CTRL, ctrl);
+
+	if (pdata && pdata->cfg_gpio)
+		pdata->cfg_gpio();
+
+	if (client->irq) {
+		ret = request_threaded_irq(client->irq, NULL,
+				fsa9480_irq_handler,
+				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				"fsa9480 micro USB", usbsw);
+		if (ret) {
+			dev_err(&client->dev, "failed to reqeust IRQ\n");
+			return ret;
+		}
+
+		device_init_wakeup(&client->dev, pdata->wakeup);
+	}
+
+	return 0;
+}
+
+static int __devinit fsa9480_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct fsa9480_usbsw *usbsw;
+	int ret = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	usbsw = kzalloc(sizeof(struct fsa9480_usbsw), GFP_KERNEL);
+	if (!usbsw) {
+		dev_err(&client->dev, "failed to allocate driver data\n");
+		return -ENOMEM;
+	}
+
+	usbsw->client = client;
+	usbsw->pdata = client->dev.platform_data;
+
+	chip = usbsw;
+
+	i2c_set_clientdata(client, usbsw);
+
+	ret = fsa9480_irq_init(usbsw);
+	if (ret)
+		goto fail1;
+
+	ret = sysfs_create_group(&client->dev.kobj, &fsa9480_group);
+	if (ret) {
+		dev_err(&client->dev,
+				"failed to create fsa9480 attribute group\n");
+		goto fail2;
+	}
+
+	/* ADC Detect Time: 500ms */
+	fsa9480_write_reg(client, FSA9480_REG_TIMING1, 0x6);
+
+	if (chip->pdata->reset_cb)
+		chip->pdata->reset_cb();
+
+	/* device detection */
+	fsa9480_detect_dev(usbsw, INT_ATTACH);
+
+	pm_runtime_set_active(&client->dev);
+
+	return 0;
+
+fail2:
+	if (client->irq)
+		free_irq(client->irq, NULL);
+fail1:
+	i2c_set_clientdata(client, NULL);
+	kfree(usbsw);
+	return ret;
+}
+
+static int __devexit fsa9480_remove(struct i2c_client *client)
+{
+	struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
+	if (client->irq)
+		free_irq(client->irq, NULL);
+	i2c_set_clientdata(client, NULL);
+
+	sysfs_remove_group(&client->dev.kobj, &fsa9480_group);
+	device_init_wakeup(&client->dev, 0);
+	kfree(usbsw);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int fsa9480_suspend(struct i2c_client *client, pm_message_t state)
+{
+	struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
+	struct fsa9480_platform_data *pdata = usbsw->pdata;
+
+	if (device_may_wakeup(&client->dev) && client->irq)
+		enable_irq_wake(client->irq);
+
+	if (pdata->usb_power)
+		pdata->usb_power(0);
+
+	return 0;
+}
+
+static int fsa9480_resume(struct i2c_client *client)
+{
+	struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
+	int dev1, dev2;
+
+	if (device_may_wakeup(&client->dev) && client->irq)
+		disable_irq_wake(client->irq);
+
+	/*
+	 * Clear Pending interrupt. Note that detect_dev does what
+	 * the interrupt handler does. So, we don't miss pending and
+	 * we reenable interrupt if there is one.
+	 */
+	fsa9480_read_reg(client, FSA9480_REG_INT1);
+	fsa9480_read_reg(client, FSA9480_REG_INT2);
+
+	dev1 = fsa9480_read_reg(client, FSA9480_REG_DEV_T1);
+	dev2 = fsa9480_read_reg(client, FSA9480_REG_DEV_T2);
+
+	/* device detection */
+	fsa9480_detect_dev(usbsw, (dev1 || dev2) ? INT_ATTACH : INT_DETACH);
+
+	return 0;
+}
+
+#else
+
+#define fsa9480_suspend NULL
+#define fsa9480_resume NULL
+
+#endif /* CONFIG_PM */
+
+static const struct i2c_device_id fsa9480_id[] = {
+	{"fsa9480", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, fsa9480_id);
+
+static struct i2c_driver fsa9480_i2c_driver = {
+	.driver = {
+		.name = "fsa9480",
+	},
+	.probe = fsa9480_probe,
+	.remove = __devexit_p(fsa9480_remove),
+	.resume = fsa9480_resume,
+	.suspend = fsa9480_suspend,
+	.id_table = fsa9480_id,
+};
+
+static int __init fsa9480_init(void)
+{
+	return i2c_add_driver(&fsa9480_i2c_driver);
+}
+module_init(fsa9480_init);
+
+static void __exit fsa9480_exit(void)
+{
+	i2c_del_driver(&fsa9480_i2c_driver);
+}
+module_exit(fsa9480_exit);
+
+MODULE_AUTHOR("Minkyu Kang <mk7.kang@samsung.com>");
+MODULE_DESCRIPTION("FSA9480 USB Switch driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 5fe79df4483..01eb67b4871 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -686,6 +686,8 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
 	}
 
 	if (id->driver_data == 1) { /* EG20T PCH */
+		const char *board_name;
+
 		retval = sysfs_create_file(&pdev->dev.kobj,
 					   &dev_attr_pch_mac.attr);
 		if (retval)
@@ -701,7 +703,8 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
 					       CLKCFG_CANCLK_MASK);
 
 		/* quirk for CM-iTC board */
-		if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC"))
+		board_name = dmi_get_system_info(DMI_BOARD_NAME);
+		if (board_name && strstr(board_name, "CM-iTC"))
 			pch_phub_read_modify_write_reg(chip,
 						(unsigned int)CLKCFG_REG_OFFSET,
 						CLKCFG_UART_48MHZ | CLKCFG_BAUDDIV |
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index f091b43d00c..89bdeaec718 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -23,6 +23,7 @@
 #include <linux/log2.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
+#include <linux/suspend.h>
 
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 1a6937d9118..bbf3edd85be 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -509,15 +509,15 @@ static __init void pnpacpi_parse_dma_option(struct pnp_dev *dev,
 					    struct acpi_resource_dma *p)
 {
 	int i;
-	unsigned char map = 0, flags;
+	unsigned char map = 0, flags = 0;
 
 	if (p->channel_count == 0)
-		return;
+		flags |= IORESOURCE_DISABLED;
 
 	for (i = 0; i < p->channel_count; i++)
 		map |= 1 << p->channels[i];
 
-	flags = dma_flags(dev, p->type, p->bus_master, p->transfer);
+	flags |= dma_flags(dev, p->type, p->bus_master, p->transfer);
 	pnp_register_dma_resource(dev, option_flags, map, flags);
 }
 
@@ -527,17 +527,17 @@ static __init void pnpacpi_parse_irq_option(struct pnp_dev *dev,
 {
 	int i;
 	pnp_irq_mask_t map;
-	unsigned char flags;
+	unsigned char flags = 0;
 
 	if (p->interrupt_count == 0)
-		return;
+		flags |= IORESOURCE_DISABLED;
 
 	bitmap_zero(map.bits, PNP_IRQ_NR);
 	for (i = 0; i < p->interrupt_count; i++)
 		if (p->interrupts[i])
 			__set_bit(p->interrupts[i], map.bits);
 
-	flags = irq_flags(p->triggering, p->polarity, p->sharable);
+	flags |= irq_flags(p->triggering, p->polarity, p->sharable);
 	pnp_register_irq_resource(dev, option_flags, &map, flags);
 }
 
@@ -547,10 +547,10 @@ static __init void pnpacpi_parse_ext_irq_option(struct pnp_dev *dev,
 {
 	int i;
 	pnp_irq_mask_t map;
-	unsigned char flags;
+	unsigned char flags = 0;
 
 	if (p->interrupt_count == 0)
-		return;
+		flags |= IORESOURCE_DISABLED;
 
 	bitmap_zero(map.bits, PNP_IRQ_NR);
 	for (i = 0; i < p->interrupt_count; i++) {
@@ -564,7 +564,7 @@ static __init void pnpacpi_parse_ext_irq_option(struct pnp_dev *dev,
 		}
 	}
 
-	flags = irq_flags(p->triggering, p->polarity, p->sharable);
+	flags |= irq_flags(p->triggering, p->polarity, p->sharable);
 	pnp_register_irq_resource(dev, option_flags, &map, flags);
 }
 
@@ -575,10 +575,10 @@ static __init void pnpacpi_parse_port_option(struct pnp_dev *dev,
 	unsigned char flags = 0;
 
 	if (io->address_length == 0)
-		return;
+		flags |= IORESOURCE_DISABLED;
 
 	if (io->io_decode == ACPI_DECODE_16)
-		flags = IORESOURCE_IO_16BIT_ADDR;
+		flags |= IORESOURCE_IO_16BIT_ADDR;
 	pnp_register_port_resource(dev, option_flags, io->minimum, io->maximum,
 				   io->alignment, io->address_length, flags);
 }
@@ -587,11 +587,13 @@ static __init void pnpacpi_parse_fixed_port_option(struct pnp_dev *dev,
 					unsigned int option_flags,
 					struct acpi_resource_fixed_io *io)
 {
+	unsigned char flags = 0;
+
 	if (io->address_length == 0)
-		return;
+		flags |= IORESOURCE_DISABLED;
 
 	pnp_register_port_resource(dev, option_flags, io->address, io->address,
-				   0, io->address_length, IORESOURCE_IO_FIXED);
+				   0, io->address_length, flags | IORESOURCE_IO_FIXED);
 }
 
 static __init void pnpacpi_parse_mem24_option(struct pnp_dev *dev,
@@ -601,10 +603,10 @@ static __init void pnpacpi_parse_mem24_option(struct pnp_dev *dev,
 	unsigned char flags = 0;
 
 	if (p->address_length == 0)
-		return;
+		flags |= IORESOURCE_DISABLED;
 
 	if (p->write_protect == ACPI_READ_WRITE_MEMORY)
-		flags = IORESOURCE_MEM_WRITEABLE;
+		flags |= IORESOURCE_MEM_WRITEABLE;
 	pnp_register_mem_resource(dev, option_flags, p->minimum, p->maximum,
 				  p->alignment, p->address_length, flags);
 }
@@ -616,10 +618,10 @@ static __init void pnpacpi_parse_mem32_option(struct pnp_dev *dev,
 	unsigned char flags = 0;
 
 	if (p->address_length == 0)
-		return;
+		flags |= IORESOURCE_DISABLED;
 
 	if (p->write_protect == ACPI_READ_WRITE_MEMORY)
-		flags = IORESOURCE_MEM_WRITEABLE;
+		flags |= IORESOURCE_MEM_WRITEABLE;
 	pnp_register_mem_resource(dev, option_flags, p->minimum, p->maximum,
 				  p->alignment, p->address_length, flags);
 }
@@ -631,10 +633,10 @@ static __init void pnpacpi_parse_fixed_mem32_option(struct pnp_dev *dev,
 	unsigned char flags = 0;
 
 	if (p->address_length == 0)
-		return;
+		flags |= IORESOURCE_DISABLED;
 
 	if (p->write_protect == ACPI_READ_WRITE_MEMORY)
-		flags = IORESOURCE_MEM_WRITEABLE;
+		flags |= IORESOURCE_MEM_WRITEABLE;
 	pnp_register_mem_resource(dev, option_flags, p->address, p->address,
 				  0, p->address_length, flags);
 }
@@ -655,18 +657,18 @@ static __init void pnpacpi_parse_address_option(struct pnp_dev *dev,
 	}
 
 	if (p->address_length == 0)
-		return;
+		flags |= IORESOURCE_DISABLED;
 
 	if (p->resource_type == ACPI_MEMORY_RANGE) {
 		if (p->info.mem.write_protect == ACPI_READ_WRITE_MEMORY)
-			flags = IORESOURCE_MEM_WRITEABLE;
+			flags |= IORESOURCE_MEM_WRITEABLE;
 		pnp_register_mem_resource(dev, option_flags, p->minimum,
 					  p->minimum, 0, p->address_length,
 					  flags);
 	} else if (p->resource_type == ACPI_IO_RANGE)
 		pnp_register_port_resource(dev, option_flags, p->minimum,
 					   p->minimum, 0, p->address_length,
-					   IORESOURCE_IO_FIXED);
+					   flags | IORESOURCE_IO_FIXED);
 }
 
 static __init void pnpacpi_parse_ext_address_option(struct pnp_dev *dev,
@@ -677,18 +679,18 @@ static __init void pnpacpi_parse_ext_address_option(struct pnp_dev *dev,
 	unsigned char flags = 0;
 
 	if (p->address_length == 0)
-		return;
+		flags |= IORESOURCE_DISABLED;
 
 	if (p->resource_type == ACPI_MEMORY_RANGE) {
 		if (p->info.mem.write_protect == ACPI_READ_WRITE_MEMORY)
-			flags = IORESOURCE_MEM_WRITEABLE;
+			flags |= IORESOURCE_MEM_WRITEABLE;
 		pnp_register_mem_resource(dev, option_flags, p->minimum,
 					  p->minimum, 0, p->address_length,
 					  flags);
 	} else if (p->resource_type == ACPI_IO_RANGE)
 		pnp_register_port_resource(dev, option_flags, p->minimum,
 					   p->minimum, 0, p->address_length,
-					   IORESOURCE_IO_FIXED);
+					   flags | IORESOURCE_IO_FIXED);
 }
 
 struct acpipnp_parse_option_s {
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index dcb61e23b98..5a538fc1cc8 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1006,10 +1006,10 @@ config RTC_DRV_MC13XXX
 
 config RTC_DRV_MPC5121
 	tristate "Freescale MPC5121 built-in RTC"
-	depends on PPC_MPC512x && RTC_CLASS
+	depends on PPC_MPC512x || PPC_MPC52xx
 	help
 	  If you say yes here you will get support for the
-	  built-in RTC MPC5121.
+	  built-in RTC on MPC5121 or on MPC5200.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-mpc5121.
@@ -1034,6 +1034,16 @@ config RTC_DRV_LPC32XX
 	  This driver can also be buillt as a module. If so, the module
 	  will be called rtc-lpc32xx.
 
+config RTC_DRV_PM8XXX
+	tristate "Qualcomm PMIC8XXX RTC"
+	depends on MFD_PM8XXX
+	help
+	  If you say yes here you get support for the
+	  Qualcomm PMIC8XXX RTC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc-pm8xxx.
+
 config RTC_DRV_TEGRA
 	tristate "NVIDIA Tegra Internal RTC driver"
 	depends on RTC_CLASS && ARCH_TEGRA
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 0ffefe877bf..6e6982335c1 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -77,6 +77,7 @@ obj-$(CONFIG_RTC_DRV_PCF2123)	+= rtc-pcf2123.o
 obj-$(CONFIG_RTC_DRV_PCF50633)	+= rtc-pcf50633.o
 obj-$(CONFIG_RTC_DRV_PL030)	+= rtc-pl030.o
 obj-$(CONFIG_RTC_DRV_PL031)	+= rtc-pl031.o
+obj-$(CONFIG_RTC_DRV_PM8XXX)	+= rtc-pm8xxx.o
 obj-$(CONFIG_RTC_DRV_PS3)	+= rtc-ps3.o
 obj-$(CONFIG_RTC_DRV_PUV3)	+= rtc-puv3.o
 obj-$(CONFIG_RTC_DRV_PXA)	+= rtc-pxa.o
diff --git a/drivers/rtc/rtc-mpc5121.c b/drivers/rtc/rtc-mpc5121.c
index 09ccd8d3ba2..da60915818b 100644
--- a/drivers/rtc/rtc-mpc5121.c
+++ b/drivers/rtc/rtc-mpc5121.c
@@ -3,6 +3,7 @@
  *
  * Copyright 2007, Domen Puncer <domen.puncer@telargo.com>
  * Copyright 2008, Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright 2011, Dmitry Eremin-Solenikov
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -145,6 +146,55 @@ static int mpc5121_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	return 0;
 }
 
+static int mpc5200_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+	int tmp;
+
+	tm->tm_sec = in_8(&regs->second);
+	tm->tm_min = in_8(&regs->minute);
+
+	/* 12 hour format? */
+	if (in_8(&regs->hour) & 0x20)
+		tm->tm_hour = (in_8(&regs->hour) >> 1) +
+			(in_8(&regs->hour) & 1 ? 12 : 0);
+	else
+		tm->tm_hour = in_8(&regs->hour);
+
+	tmp = in_8(&regs->wday_mday);
+	tm->tm_mday = tmp & 0x1f;
+	tm->tm_mon = in_8(&regs->month) - 1;
+	tm->tm_year = in_be16(&regs->year) - 1900;
+	tm->tm_wday = (tmp >> 5) % 7;
+	tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
+	tm->tm_isdst = 0;
+
+	return 0;
+}
+
+static int mpc5200_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
+	struct mpc5121_rtc_regs __iomem *regs = rtc->regs;
+
+	mpc5121_rtc_update_smh(regs, tm);
+
+	/* date */
+	out_8(&regs->month_set, tm->tm_mon + 1);
+	out_8(&regs->weekday_set, tm->tm_wday ? tm->tm_wday : 7);
+	out_8(&regs->date_set, tm->tm_mday);
+	out_be16(&regs->year_set, tm->tm_year + 1900);
+
+	/* set date sequence */
+	out_8(&regs->set_date, 0x1);
+	out_8(&regs->set_date, 0x3);
+	out_8(&regs->set_date, 0x1);
+	out_8(&regs->set_date, 0x0);
+
+	return 0;
+}
+
 static int mpc5121_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
 	struct mpc5121_rtc_data *rtc = dev_get_drvdata(dev);
@@ -248,11 +298,18 @@ static const struct rtc_class_ops mpc5121_rtc_ops = {
 	.alarm_irq_enable = mpc5121_rtc_alarm_irq_enable,
 };
 
+static const struct rtc_class_ops mpc5200_rtc_ops = {
+	.read_time = mpc5200_rtc_read_time,
+	.set_time = mpc5200_rtc_set_time,
+	.read_alarm = mpc5121_rtc_read_alarm,
+	.set_alarm = mpc5121_rtc_set_alarm,
+	.alarm_irq_enable = mpc5121_rtc_alarm_irq_enable,
+};
+
 static int __devinit mpc5121_rtc_probe(struct platform_device *op)
 {
 	struct mpc5121_rtc_data *rtc;
 	int err = 0;
-	u32 ka;
 
 	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
 	if (!rtc)
@@ -287,15 +344,22 @@ static int __devinit mpc5121_rtc_probe(struct platform_device *op)
 		goto out_dispose2;
 	}
 
-	ka = in_be32(&rtc->regs->keep_alive);
-	if (ka & 0x02) {
-		dev_warn(&op->dev,
-			"mpc5121-rtc: Battery or oscillator failure!\n");
-		out_be32(&rtc->regs->keep_alive, ka);
+	if (of_device_is_compatible(op->dev.of_node, "fsl,mpc5121-rtc")) {
+		u32 ka;
+		ka = in_be32(&rtc->regs->keep_alive);
+		if (ka & 0x02) {
+			dev_warn(&op->dev,
+				"mpc5121-rtc: Battery or oscillator failure!\n");
+			out_be32(&rtc->regs->keep_alive, ka);
+		}
+
+		rtc->rtc = rtc_device_register("mpc5121-rtc", &op->dev,
+						&mpc5121_rtc_ops, THIS_MODULE);
+	} else {
+		rtc->rtc = rtc_device_register("mpc5200-rtc", &op->dev,
+						&mpc5200_rtc_ops, THIS_MODULE);
 	}
 
-	rtc->rtc = rtc_device_register("mpc5121-rtc", &op->dev,
-					&mpc5121_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc->rtc)) {
 		err = PTR_ERR(rtc->rtc);
 		goto out_free_irq;
@@ -340,6 +404,7 @@ static int __devexit mpc5121_rtc_remove(struct platform_device *op)
 
 static struct of_device_id mpc5121_rtc_match[] __devinitdata = {
 	{ .compatible = "fsl,mpc5121-rtc", },
+	{ .compatible = "fsl,mpc5200-rtc", },
 	{},
 };
 
diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
new file mode 100644
index 00000000000..d420e9d877e
--- /dev/null
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -0,0 +1,550 @@
+/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <linux/mfd/pm8xxx/core.h>
+#include <linux/mfd/pm8xxx/rtc.h>
+
+
+/* RTC Register offsets from RTC CTRL REG */
+#define PM8XXX_ALARM_CTRL_OFFSET	0x01
+#define PM8XXX_RTC_WRITE_OFFSET		0x02
+#define PM8XXX_RTC_READ_OFFSET		0x06
+#define PM8XXX_ALARM_RW_OFFSET		0x0A
+
+/* RTC_CTRL register bit fields */
+#define PM8xxx_RTC_ENABLE		BIT(7)
+#define PM8xxx_RTC_ALARM_ENABLE		BIT(1)
+#define PM8xxx_RTC_ALARM_CLEAR		BIT(0)
+
+#define NUM_8_BIT_RTC_REGS		0x4
+
+/**
+ * struct pm8xxx_rtc -  rtc driver internal structure
+ * @rtc:		rtc device for this driver.
+ * @rtc_alarm_irq:	rtc alarm irq number.
+ * @rtc_base:		address of rtc control register.
+ * @rtc_read_base:	base address of read registers.
+ * @rtc_write_base:	base address of write registers.
+ * @alarm_rw_base:	base address of alarm registers.
+ * @ctrl_reg:		rtc control register.
+ * @rtc_dev:		device structure.
+ * @ctrl_reg_lock:	spinlock protecting access to ctrl_reg.
+ */
+struct pm8xxx_rtc {
+	struct rtc_device *rtc;
+	int rtc_alarm_irq;
+	int rtc_base;
+	int rtc_read_base;
+	int rtc_write_base;
+	int alarm_rw_base;
+	u8  ctrl_reg;
+	struct device *rtc_dev;
+	spinlock_t ctrl_reg_lock;
+};
+
+/*
+ * The RTC registers need to be read/written one byte at a time. This is a
+ * hardware limitation.
+ */
+static int pm8xxx_read_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
+		int base, int count)
+{
+	int i, rc;
+	struct device *parent = rtc_dd->rtc_dev->parent;
+
+	for (i = 0; i < count; i++) {
+		rc = pm8xxx_readb(parent, base + i, &rtc_val[i]);
+		if (rc < 0) {
+			dev_err(rtc_dd->rtc_dev, "PMIC read failed\n");
+			return rc;
+		}
+	}
+
+	return 0;
+}
+
+static int pm8xxx_write_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val,
+		int base, int count)
+{
+	int i, rc;
+	struct device *parent = rtc_dd->rtc_dev->parent;
+
+	for (i = 0; i < count; i++) {
+		rc = pm8xxx_writeb(parent, base + i, rtc_val[i]);
+		if (rc < 0) {
+			dev_err(rtc_dd->rtc_dev, "PMIC write failed\n");
+			return rc;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Steps to write the RTC registers.
+ * 1. Disable alarm if enabled.
+ * 2. Write 0x00 to LSB.
+ * 3. Write Byte[1], Byte[2], Byte[3] then Byte[0].
+ * 4. Enable alarm if disabled in step 1.
+ */
+static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	int rc, i;
+	unsigned long secs, irq_flags;
+	u8 value[NUM_8_BIT_RTC_REGS], reg = 0, alarm_enabled = 0, ctrl_reg;
+	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+	rtc_tm_to_time(tm, &secs);
+
+	for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
+		value[i] = secs & 0xFF;
+		secs >>= 8;
+	}
+
+	dev_dbg(dev, "Seconds value to be written to RTC = %lu\n", secs);
+
+	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+	ctrl_reg = rtc_dd->ctrl_reg;
+
+	if (ctrl_reg & PM8xxx_RTC_ALARM_ENABLE) {
+		alarm_enabled = 1;
+		ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+		rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
+				1);
+		if (rc < 0) {
+			dev_err(dev, "Write to RTC control register "
+								"failed\n");
+			goto rtc_rw_fail;
+		}
+		rtc_dd->ctrl_reg = ctrl_reg;
+	} else
+		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+	/* Write 0 to Byte[0] */
+	reg = 0;
+	rc = pm8xxx_write_wrapper(rtc_dd, &reg, rtc_dd->rtc_write_base, 1);
+	if (rc < 0) {
+		dev_err(dev, "Write to RTC write data register failed\n");
+		goto rtc_rw_fail;
+	}
+
+	/* Write Byte[1], Byte[2], Byte[3] */
+	rc = pm8xxx_write_wrapper(rtc_dd, value + 1,
+					rtc_dd->rtc_write_base + 1, 3);
+	if (rc < 0) {
+		dev_err(dev, "Write to RTC write data register failed\n");
+		goto rtc_rw_fail;
+	}
+
+	/* Write Byte[0] */
+	rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->rtc_write_base, 1);
+	if (rc < 0) {
+		dev_err(dev, "Write to RTC write data register failed\n");
+		goto rtc_rw_fail;
+	}
+
+	if (alarm_enabled) {
+		ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
+		rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
+									1);
+		if (rc < 0) {
+			dev_err(dev, "Write to RTC control register "
+								"failed\n");
+			goto rtc_rw_fail;
+		}
+		rtc_dd->ctrl_reg = ctrl_reg;
+	}
+
+rtc_rw_fail:
+	if (alarm_enabled)
+		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+	return rc;
+}
+
+static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	int rc;
+	u8 value[NUM_8_BIT_RTC_REGS], reg;
+	unsigned long secs;
+	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+	rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->rtc_read_base,
+							NUM_8_BIT_RTC_REGS);
+	if (rc < 0) {
+		dev_err(dev, "RTC read data register failed\n");
+		return rc;
+	}
+
+	/*
+	 * Read the LSB again and check if there has been a carry over.
+	 * If there is, redo the read operation.
+	 */
+	rc = pm8xxx_read_wrapper(rtc_dd, &reg, rtc_dd->rtc_read_base, 1);
+	if (rc < 0) {
+		dev_err(dev, "RTC read data register failed\n");
+		return rc;
+	}
+
+	if (unlikely(reg < value[0])) {
+		rc = pm8xxx_read_wrapper(rtc_dd, value,
+				rtc_dd->rtc_read_base, NUM_8_BIT_RTC_REGS);
+		if (rc < 0) {
+			dev_err(dev, "RTC read data register failed\n");
+			return rc;
+		}
+	}
+
+	secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
+
+	rtc_time_to_tm(secs, tm);
+
+	rc = rtc_valid_tm(tm);
+	if (rc < 0) {
+		dev_err(dev, "Invalid time read from RTC\n");
+		return rc;
+	}
+
+	dev_dbg(dev, "secs = %lu, h:m:s == %d:%d:%d, d/m/y = %d/%d/%d\n",
+				secs, tm->tm_hour, tm->tm_min, tm->tm_sec,
+				tm->tm_mday, tm->tm_mon, tm->tm_year);
+
+	return 0;
+}
+
+static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	int rc, i;
+	u8 value[NUM_8_BIT_RTC_REGS], ctrl_reg;
+	unsigned long secs, irq_flags;
+	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+	rtc_tm_to_time(&alarm->time, &secs);
+
+	for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) {
+		value[i] = secs & 0xFF;
+		secs >>= 8;
+	}
+
+	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+	rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
+							NUM_8_BIT_RTC_REGS);
+	if (rc < 0) {
+		dev_err(dev, "Write to RTC ALARM register failed\n");
+		goto rtc_rw_fail;
+	}
+
+	ctrl_reg = rtc_dd->ctrl_reg;
+	ctrl_reg = alarm->enabled ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
+					(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
+
+	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
+	if (rc < 0) {
+		dev_err(dev, "Write to RTC control register failed\n");
+		goto rtc_rw_fail;
+	}
+
+	rtc_dd->ctrl_reg = ctrl_reg;
+
+	dev_dbg(dev, "Alarm Set for h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
+				alarm->time.tm_hour, alarm->time.tm_min,
+				alarm->time.tm_sec, alarm->time.tm_mday,
+				alarm->time.tm_mon, alarm->time.tm_year);
+rtc_rw_fail:
+	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+	return rc;
+}
+
+static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	int rc;
+	u8 value[NUM_8_BIT_RTC_REGS];
+	unsigned long secs;
+	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+	rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base,
+			NUM_8_BIT_RTC_REGS);
+	if (rc < 0) {
+		dev_err(dev, "RTC alarm time read failed\n");
+		return rc;
+	}
+
+	secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24);
+
+	rtc_time_to_tm(secs, &alarm->time);
+
+	rc = rtc_valid_tm(&alarm->time);
+	if (rc < 0) {
+		dev_err(dev, "Invalid alarm time read from RTC\n");
+		return rc;
+	}
+
+	dev_dbg(dev, "Alarm set for - h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
+				alarm->time.tm_hour, alarm->time.tm_min,
+				alarm->time.tm_sec, alarm->time.tm_mday,
+				alarm->time.tm_mon, alarm->time.tm_year);
+
+	return 0;
+}
+
+static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+	int rc;
+	unsigned long irq_flags;
+	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+	u8 ctrl_reg;
+
+	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+	ctrl_reg = rtc_dd->ctrl_reg;
+	ctrl_reg = (enable) ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) :
+				(ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE);
+
+	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
+	if (rc < 0) {
+		dev_err(dev, "Write to RTC control register failed\n");
+		goto rtc_rw_fail;
+	}
+
+	rtc_dd->ctrl_reg = ctrl_reg;
+
+rtc_rw_fail:
+	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+	return rc;
+}
+
+static struct rtc_class_ops pm8xxx_rtc_ops = {
+	.read_time	= pm8xxx_rtc_read_time,
+	.set_alarm	= pm8xxx_rtc_set_alarm,
+	.read_alarm	= pm8xxx_rtc_read_alarm,
+	.alarm_irq_enable = pm8xxx_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
+{
+	struct pm8xxx_rtc *rtc_dd = dev_id;
+	u8 ctrl_reg;
+	int rc;
+	unsigned long irq_flags;
+
+	rtc_update_irq(rtc_dd->rtc, 1, RTC_IRQF | RTC_AF);
+
+	spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+	/* Clear the alarm enable bit */
+	ctrl_reg = rtc_dd->ctrl_reg;
+	ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+
+	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
+	if (rc < 0) {
+		spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+		dev_err(rtc_dd->rtc_dev, "Write to RTC control register "
+								"failed\n");
+		goto rtc_alarm_handled;
+	}
+
+	rtc_dd->ctrl_reg = ctrl_reg;
+	spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+
+	/* Clear RTC alarm register */
+	rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
+						PM8XXX_ALARM_CTRL_OFFSET, 1);
+	if (rc < 0) {
+		dev_err(rtc_dd->rtc_dev, "RTC Alarm control register read "
+								"failed\n");
+		goto rtc_alarm_handled;
+	}
+
+	ctrl_reg &= ~PM8xxx_RTC_ALARM_CLEAR;
+	rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base +
+						PM8XXX_ALARM_CTRL_OFFSET, 1);
+	if (rc < 0)
+		dev_err(rtc_dd->rtc_dev, "Write to RTC Alarm control register"
+								" failed\n");
+
+rtc_alarm_handled:
+	return IRQ_HANDLED;
+}
+
+static int __devinit pm8xxx_rtc_probe(struct platform_device *pdev)
+{
+	int rc;
+	u8 ctrl_reg;
+	bool rtc_write_enable = false;
+	struct pm8xxx_rtc *rtc_dd;
+	struct resource *rtc_resource;
+	const struct pm8xxx_rtc_platform_data *pdata =
+						dev_get_platdata(&pdev->dev);
+
+	if (pdata != NULL)
+		rtc_write_enable = pdata->rtc_write_enable;
+
+	rtc_dd = kzalloc(sizeof(*rtc_dd), GFP_KERNEL);
+	if (rtc_dd == NULL) {
+		dev_err(&pdev->dev, "Unable to allocate memory!\n");
+		return -ENOMEM;
+	}
+
+	/* Initialise spinlock to protect RTC control register */
+	spin_lock_init(&rtc_dd->ctrl_reg_lock);
+
+	rtc_dd->rtc_alarm_irq = platform_get_irq(pdev, 0);
+	if (rtc_dd->rtc_alarm_irq < 0) {
+		dev_err(&pdev->dev, "Alarm IRQ resource absent!\n");
+		rc = -ENXIO;
+		goto fail_rtc_enable;
+	}
+
+	rtc_resource = platform_get_resource_byname(pdev, IORESOURCE_IO,
+							"pmic_rtc_base");
+	if (!(rtc_resource && rtc_resource->start)) {
+		dev_err(&pdev->dev, "RTC IO resource absent!\n");
+		rc = -ENXIO;
+		goto fail_rtc_enable;
+	}
+
+	rtc_dd->rtc_base = rtc_resource->start;
+
+	/* Setup RTC register addresses */
+	rtc_dd->rtc_write_base = rtc_dd->rtc_base + PM8XXX_RTC_WRITE_OFFSET;
+	rtc_dd->rtc_read_base = rtc_dd->rtc_base + PM8XXX_RTC_READ_OFFSET;
+	rtc_dd->alarm_rw_base = rtc_dd->rtc_base + PM8XXX_ALARM_RW_OFFSET;
+
+	rtc_dd->rtc_dev = &pdev->dev;
+
+	/* Check if the RTC is on, else turn it on */
+	rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "RTC control register read failed!\n");
+		goto fail_rtc_enable;
+	}
+
+	if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
+		ctrl_reg |= PM8xxx_RTC_ENABLE;
+		rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base,
+									1);
+		if (rc < 0) {
+			dev_err(&pdev->dev, "Write to RTC control register "
+								"failed\n");
+			goto fail_rtc_enable;
+		}
+	}
+
+	rtc_dd->ctrl_reg = ctrl_reg;
+	if (rtc_write_enable == true)
+		pm8xxx_rtc_ops.set_time = pm8xxx_rtc_set_time;
+
+	platform_set_drvdata(pdev, rtc_dd);
+
+	/* Register the RTC device */
+	rtc_dd->rtc = rtc_device_register("pm8xxx_rtc", &pdev->dev,
+				&pm8xxx_rtc_ops, THIS_MODULE);
+	if (IS_ERR(rtc_dd->rtc)) {
+		dev_err(&pdev->dev, "%s: RTC registration failed (%ld)\n",
+					__func__, PTR_ERR(rtc_dd->rtc));
+		rc = PTR_ERR(rtc_dd->rtc);
+		goto fail_rtc_enable;
+	}
+
+	/* Request the alarm IRQ */
+	rc = request_any_context_irq(rtc_dd->rtc_alarm_irq,
+				 pm8xxx_alarm_trigger, IRQF_TRIGGER_RISING,
+				 "pm8xxx_rtc_alarm", rtc_dd);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "Request IRQ failed (%d)\n", rc);
+		goto fail_req_irq;
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	dev_dbg(&pdev->dev, "Probe success !!\n");
+
+	return 0;
+
+fail_req_irq:
+	rtc_device_unregister(rtc_dd->rtc);
+fail_rtc_enable:
+	platform_set_drvdata(pdev, NULL);
+	kfree(rtc_dd);
+	return rc;
+}
+
+static int __devexit pm8xxx_rtc_remove(struct platform_device *pdev)
+{
+	struct pm8xxx_rtc *rtc_dd = platform_get_drvdata(pdev);
+
+	device_init_wakeup(&pdev->dev, 0);
+	free_irq(rtc_dd->rtc_alarm_irq, rtc_dd);
+	rtc_device_unregister(rtc_dd->rtc);
+	platform_set_drvdata(pdev, NULL);
+	kfree(rtc_dd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pm8xxx_rtc_resume(struct device *dev)
+{
+	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(rtc_dd->rtc_alarm_irq);
+
+	return 0;
+}
+
+static int pm8xxx_rtc_suspend(struct device *dev)
+{
+	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(rtc_dd->rtc_alarm_irq);
+
+	return 0;
+}
+#endif
+
+SIMPLE_DEV_PM_OPS(pm8xxx_rtc_pm_ops, pm8xxx_rtc_suspend, pm8xxx_rtc_resume);
+
+static struct platform_driver pm8xxx_rtc_driver = {
+	.probe		= pm8xxx_rtc_probe,
+	.remove		= __devexit_p(pm8xxx_rtc_remove),
+	.driver	= {
+		.name	= PM8XXX_RTC_DEV_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &pm8xxx_rtc_pm_ops,
+	},
+};
+
+static int __init pm8xxx_rtc_init(void)
+{
+	return platform_driver_register(&pm8xxx_rtc_driver);
+}
+module_init(pm8xxx_rtc_init);
+
+static void __exit pm8xxx_rtc_exit(void)
+{
+	platform_driver_unregister(&pm8xxx_rtc_driver);
+}
+module_exit(pm8xxx_rtc_exit);
+
+MODULE_ALIAS("platform:rtc-pm8xxx");
+MODULE_DESCRIPTION("PMIC8xxx RTC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anirudh Ghayal <aghayal@codeaurora.org>");
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 2a65e85e0f5..9329dbb9eba 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -57,11 +57,13 @@ static irqreturn_t s3c_rtc_alarmirq(int irq, void *id)
 {
 	struct rtc_device *rdev = id;
 
+	clk_enable(rtc_clk);
 	rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF);
 
 	if (s3c_rtc_cpu_type == TYPE_S3C64XX)
 		writeb(S3C2410_INTP_ALM, s3c_rtc_base + S3C2410_INTP);
 
+	clk_disable(rtc_clk);
 	return IRQ_HANDLED;
 }
 
@@ -69,11 +71,13 @@ static irqreturn_t s3c_rtc_tickirq(int irq, void *id)
 {
 	struct rtc_device *rdev = id;
 
+	clk_enable(rtc_clk);
 	rtc_update_irq(rdev, 1, RTC_PF | RTC_IRQF);
 
 	if (s3c_rtc_cpu_type == TYPE_S3C64XX)
 		writeb(S3C2410_INTP_TIC, s3c_rtc_base + S3C2410_INTP);
 
+	clk_disable(rtc_clk);
 	return IRQ_HANDLED;
 }
 
@@ -84,12 +88,14 @@ static int s3c_rtc_setaie(struct device *dev, unsigned int enabled)
 
 	pr_debug("%s: aie=%d\n", __func__, enabled);
 
+	clk_enable(rtc_clk);
 	tmp = readb(s3c_rtc_base + S3C2410_RTCALM) & ~S3C2410_RTCALM_ALMEN;
 
 	if (enabled)
 		tmp |= S3C2410_RTCALM_ALMEN;
 
 	writeb(tmp, s3c_rtc_base + S3C2410_RTCALM);
+	clk_disable(rtc_clk);
 
 	return 0;
 }
@@ -103,6 +109,7 @@ static int s3c_rtc_setfreq(struct device *dev, int freq)
 	if (!is_power_of_2(freq))
 		return -EINVAL;
 
+	clk_enable(rtc_clk);
 	spin_lock_irq(&s3c_rtc_pie_lock);
 
 	if (s3c_rtc_cpu_type == TYPE_S3C2410) {
@@ -114,6 +121,7 @@ static int s3c_rtc_setfreq(struct device *dev, int freq)
 
 	writel(tmp, s3c_rtc_base + S3C2410_TICNT);
 	spin_unlock_irq(&s3c_rtc_pie_lock);
+	clk_disable(rtc_clk);
 
 	return 0;
 }
@@ -125,6 +133,7 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
 	unsigned int have_retried = 0;
 	void __iomem *base = s3c_rtc_base;
 
+	clk_enable(rtc_clk);
  retry_get_time:
 	rtc_tm->tm_min  = readb(base + S3C2410_RTCMIN);
 	rtc_tm->tm_hour = readb(base + S3C2410_RTCHOUR);
@@ -157,6 +166,7 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
 	rtc_tm->tm_year += 100;
 	rtc_tm->tm_mon -= 1;
 
+	clk_disable(rtc_clk);
 	return rtc_valid_tm(rtc_tm);
 }
 
@@ -165,6 +175,7 @@ static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm)
 	void __iomem *base = s3c_rtc_base;
 	int year = tm->tm_year - 100;
 
+	clk_enable(rtc_clk);
 	pr_debug("set time %04d.%02d.%02d %02d:%02d:%02d\n",
 		 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
 		 tm->tm_hour, tm->tm_min, tm->tm_sec);
@@ -182,6 +193,7 @@ static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm)
 	writeb(bin2bcd(tm->tm_mday), base + S3C2410_RTCDATE);
 	writeb(bin2bcd(tm->tm_mon + 1), base + S3C2410_RTCMON);
 	writeb(bin2bcd(year), base + S3C2410_RTCYEAR);
+	clk_disable(rtc_clk);
 
 	return 0;
 }
@@ -192,6 +204,7 @@ static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
 	void __iomem *base = s3c_rtc_base;
 	unsigned int alm_en;
 
+	clk_enable(rtc_clk);
 	alm_tm->tm_sec  = readb(base + S3C2410_ALMSEC);
 	alm_tm->tm_min  = readb(base + S3C2410_ALMMIN);
 	alm_tm->tm_hour = readb(base + S3C2410_ALMHOUR);
@@ -243,6 +256,7 @@ static int s3c_rtc_getalarm(struct device *dev, struct rtc_wkalrm *alrm)
 	else
 		alm_tm->tm_year = -1;
 
+	clk_disable(rtc_clk);
 	return 0;
 }
 
@@ -252,6 +266,7 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
 	void __iomem *base = s3c_rtc_base;
 	unsigned int alrm_en;
 
+	clk_enable(rtc_clk);
 	pr_debug("s3c_rtc_setalarm: %d, %04d.%02d.%02d %02d:%02d:%02d\n",
 		 alrm->enabled,
 		 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday,
@@ -282,6 +297,7 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 	s3c_rtc_setaie(dev, alrm->enabled);
 
+	clk_disable(rtc_clk);
 	return 0;
 }
 
@@ -289,6 +305,7 @@ static int s3c_rtc_proc(struct device *dev, struct seq_file *seq)
 {
 	unsigned int ticnt;
 
+	clk_enable(rtc_clk);
 	if (s3c_rtc_cpu_type == TYPE_S3C64XX) {
 		ticnt = readw(s3c_rtc_base + S3C2410_RTCCON);
 		ticnt &= S3C64XX_RTCCON_TICEN;
@@ -298,6 +315,7 @@ static int s3c_rtc_proc(struct device *dev, struct seq_file *seq)
 	}
 
 	seq_printf(seq, "periodic_IRQ\t: %s\n", ticnt  ? "yes" : "no");
+	clk_disable(rtc_clk);
 	return 0;
 }
 
@@ -360,6 +378,7 @@ static void s3c_rtc_enable(struct platform_device *pdev, int en)
 	if (s3c_rtc_base == NULL)
 		return;
 
+	clk_enable(rtc_clk);
 	if (!en) {
 		tmp = readw(base + S3C2410_RTCCON);
 		if (s3c_rtc_cpu_type == TYPE_S3C64XX)
@@ -399,6 +418,7 @@ static void s3c_rtc_enable(struct platform_device *pdev, int en)
 				base + S3C2410_RTCCON);
 		}
 	}
+	clk_disable(rtc_clk);
 }
 
 static int __devexit s3c_rtc_remove(struct platform_device *dev)
@@ -410,7 +430,6 @@ static int __devexit s3c_rtc_remove(struct platform_device *dev)
 
 	s3c_rtc_setaie(&dev->dev, 0);
 
-	clk_disable(rtc_clk);
 	clk_put(rtc_clk);
 	rtc_clk = NULL;
 
@@ -529,6 +548,8 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
 
 	s3c_rtc_setfreq(&pdev->dev, 1);
 
+	clk_disable(rtc_clk);
+
 	return 0;
 
  err_nortc:
@@ -554,6 +575,7 @@ static int ticnt_save, ticnt_en_save;
 
 static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state)
 {
+	clk_enable(rtc_clk);
 	/* save TICNT for anyone using periodic interrupts */
 	ticnt_save = readb(s3c_rtc_base + S3C2410_TICNT);
 	if (s3c_rtc_cpu_type == TYPE_S3C64XX) {
@@ -568,6 +590,7 @@ static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state)
 		else
 			dev_err(&pdev->dev, "enable_irq_wake failed\n");
 	}
+	clk_disable(rtc_clk);
 
 	return 0;
 }
@@ -576,6 +599,7 @@ static int s3c_rtc_resume(struct platform_device *pdev)
 {
 	unsigned int tmp;
 
+	clk_enable(rtc_clk);
 	s3c_rtc_enable(pdev, 1);
 	writeb(ticnt_save, s3c_rtc_base + S3C2410_TICNT);
 	if (s3c_rtc_cpu_type == TYPE_S3C64XX && ticnt_en_save) {
@@ -587,6 +611,7 @@ static int s3c_rtc_resume(struct platform_device *pdev)
 		disable_irq_wake(s3c_rtc_alarmno);
 		wake_en = false;
 	}
+	clk_disable(rtc_clk);
 
 	return 0;
 }
diff --git a/drivers/rtc/rtc-tegra.c b/drivers/rtc/rtc-tegra.c
index 2fc31aac3f4..75259fe3860 100644
--- a/drivers/rtc/rtc-tegra.c
+++ b/drivers/rtc/rtc-tegra.c
@@ -343,7 +343,7 @@ static int __devinit tegra_rtc_probe(struct platform_device *pdev)
 
 	/* set context info. */
 	info->pdev = pdev;
-	info->tegra_rtc_lock = __SPIN_LOCK_UNLOCKED(info->tegra_rtc_lock);
+	spin_lock_init(&info->tegra_rtc_lock);
 
 	platform_set_drvdata(pdev, info);
 
diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c
index f9a2799c44d..9a81f778d6b 100644
--- a/drivers/rtc/rtc-twl.c
+++ b/drivers/rtc/rtc-twl.c
@@ -275,7 +275,7 @@ static int twl_rtc_set_time(struct device *dev, struct rtc_time *tm)
 		goto out;
 
 	save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M;
-	twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
+	ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
 	if (ret < 0)
 		goto out;
 
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 2d93c8d61ad..1e54b8b7f69 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -117,6 +117,14 @@ config LCD_LD9040
 	  If you have an LD9040 Panel, say Y to enable its
 	  control driver.
 
+config LCD_AMS369FG06
+	tristate "AMS369FG06 AMOLED LCD Driver"
+	depends on SPI && BACKLIGHT_CLASS_DEVICE
+	default n
+	help
+	  If you have an AMS369FG06 AMOLED Panel, say Y to enable its
+	  LCD control driver.
+
 endif # LCD_CLASS_DEVICE
 
 #
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index ee72adb8786..bf1dd92b752 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_LCD_TDO24M)	   += tdo24m.o
 obj-$(CONFIG_LCD_TOSA)		   += tosa_lcd.o
 obj-$(CONFIG_LCD_S6E63M0)	+= s6e63m0.o
 obj-$(CONFIG_LCD_LD9040)	+= ld9040.o
+obj-$(CONFIG_LCD_AMS369FG06)	+= ams369fg06.o
 
 obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
 obj-$(CONFIG_BACKLIGHT_ATMEL_PWM)    += atmel-pwm-bl.o
diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
index d2a96a421ff..183b6f63985 100644
--- a/drivers/video/backlight/adp8860_bl.c
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -722,8 +722,7 @@ static int __devinit adp8860_probe(struct i2c_client *client,
 		goto out2;
 	}
 
-	bl->props.max_brightness =
-		bl->props.brightness = ADP8860_MAX_BRIGHTNESS;
+	bl->props.brightness = ADP8860_MAX_BRIGHTNESS;
 
 	data->bl = bl;
 
diff --git a/drivers/video/backlight/ams369fg06.c b/drivers/video/backlight/ams369fg06.c
new file mode 100644
index 00000000000..9f0a491e2a0
--- /dev/null
+++ b/drivers/video/backlight/ams369fg06.c
@@ -0,0 +1,646 @@
+/*
+ * ams369fg06 AMOLED LCD panel driver.
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han  <jg1.han@samsung.com>
+ *
+ * Derived from drivers/video/s6e63m0.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/wait.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/lcd.h>
+#include <linux/backlight.h>
+
+#define SLEEPMSEC		0x1000
+#define ENDDEF			0x2000
+#define	DEFMASK			0xFF00
+#define COMMAND_ONLY		0xFE
+#define DATA_ONLY		0xFF
+
+#define MAX_GAMMA_LEVEL		5
+#define GAMMA_TABLE_COUNT	21
+
+#define MIN_BRIGHTNESS		0
+#define MAX_BRIGHTNESS		255
+#define DEFAULT_BRIGHTNESS	150
+
+struct ams369fg06 {
+	struct device			*dev;
+	struct spi_device		*spi;
+	unsigned int			power;
+	struct lcd_device		*ld;
+	struct backlight_device		*bd;
+	struct lcd_platform_data	*lcd_pd;
+};
+
+static const unsigned short seq_display_on[] = {
+	0x14, 0x03,
+	ENDDEF, 0x0000
+};
+
+static const unsigned short seq_display_off[] = {
+	0x14, 0x00,
+	ENDDEF, 0x0000
+};
+
+static const unsigned short seq_stand_by_on[] = {
+	0x1D, 0xA1,
+	SLEEPMSEC, 200,
+	ENDDEF, 0x0000
+};
+
+static const unsigned short seq_stand_by_off[] = {
+	0x1D, 0xA0,
+	SLEEPMSEC, 250,
+	ENDDEF, 0x0000
+};
+
+static const unsigned short seq_setting[] = {
+	0x31, 0x08,
+	0x32, 0x14,
+	0x30, 0x02,
+	0x27, 0x01,
+	0x12, 0x08,
+	0x13, 0x08,
+	0x15, 0x00,
+	0x16, 0x00,
+
+	0xef, 0xd0,
+	DATA_ONLY, 0xe8,
+
+	0x39, 0x44,
+	0x40, 0x00,
+	0x41, 0x3f,
+	0x42, 0x2a,
+	0x43, 0x27,
+	0x44, 0x27,
+	0x45, 0x1f,
+	0x46, 0x44,
+	0x50, 0x00,
+	0x51, 0x00,
+	0x52, 0x17,
+	0x53, 0x24,
+	0x54, 0x26,
+	0x55, 0x1f,
+	0x56, 0x43,
+	0x60, 0x00,
+	0x61, 0x3f,
+	0x62, 0x2a,
+	0x63, 0x25,
+	0x64, 0x24,
+	0x65, 0x1b,
+	0x66, 0x5c,
+
+	0x17, 0x22,
+	0x18, 0x33,
+	0x19, 0x03,
+	0x1a, 0x01,
+	0x22, 0xa4,
+	0x23, 0x00,
+	0x26, 0xa0,
+
+	0x1d, 0xa0,
+	SLEEPMSEC, 300,
+
+	0x14, 0x03,
+
+	ENDDEF, 0x0000
+};
+
+/* gamma value: 2.2 */
+static const unsigned int ams369fg06_22_250[] = {
+	0x00, 0x3f, 0x2a, 0x27, 0x27, 0x1f, 0x44,
+	0x00, 0x00, 0x17, 0x24, 0x26, 0x1f, 0x43,
+	0x00, 0x3f, 0x2a, 0x25, 0x24, 0x1b, 0x5c,
+};
+
+static const unsigned int ams369fg06_22_200[] = {
+	0x00, 0x3f, 0x28, 0x29, 0x27, 0x21, 0x3e,
+	0x00, 0x00, 0x10, 0x25, 0x27, 0x20, 0x3d,
+	0x00, 0x3f, 0x28, 0x27, 0x25, 0x1d, 0x53,
+};
+
+static const unsigned int ams369fg06_22_150[] = {
+	0x00, 0x3f, 0x2d, 0x29, 0x28, 0x23, 0x37,
+	0x00, 0x00, 0x0b, 0x25, 0x28, 0x22, 0x36,
+	0x00, 0x3f, 0x2b, 0x28, 0x26, 0x1f, 0x4a,
+};
+
+static const unsigned int ams369fg06_22_100[] = {
+	0x00, 0x3f, 0x30, 0x2a, 0x2b, 0x24, 0x2f,
+	0x00, 0x00, 0x00, 0x25, 0x29, 0x24, 0x2e,
+	0x00, 0x3f, 0x2f, 0x29, 0x29, 0x21, 0x3f,
+};
+
+static const unsigned int ams369fg06_22_50[] = {
+	0x00, 0x3f, 0x3c, 0x2c, 0x2d, 0x27, 0x24,
+	0x00, 0x00, 0x00, 0x22, 0x2a, 0x27, 0x23,
+	0x00, 0x3f, 0x3b, 0x2c, 0x2b, 0x24, 0x31,
+};
+
+struct ams369fg06_gamma {
+	unsigned int *gamma_22_table[MAX_GAMMA_LEVEL];
+};
+
+static struct ams369fg06_gamma gamma_table = {
+	.gamma_22_table[0] = (unsigned int *)&ams369fg06_22_50,
+	.gamma_22_table[1] = (unsigned int *)&ams369fg06_22_100,
+	.gamma_22_table[2] = (unsigned int *)&ams369fg06_22_150,
+	.gamma_22_table[3] = (unsigned int *)&ams369fg06_22_200,
+	.gamma_22_table[4] = (unsigned int *)&ams369fg06_22_250,
+};
+
+static int ams369fg06_spi_write_byte(struct ams369fg06 *lcd, int addr, int data)
+{
+	u16 buf[1];
+	struct spi_message msg;
+
+	struct spi_transfer xfer = {
+		.len		= 2,
+		.tx_buf		= buf,
+	};
+
+	buf[0] = (addr << 8) | data;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	return spi_sync(lcd->spi, &msg);
+}
+
+static int ams369fg06_spi_write(struct ams369fg06 *lcd, unsigned char address,
+	unsigned char command)
+{
+	int ret = 0;
+
+	if (address != DATA_ONLY)
+		ret = ams369fg06_spi_write_byte(lcd, 0x70, address);
+	if (command != COMMAND_ONLY)
+		ret = ams369fg06_spi_write_byte(lcd, 0x72, command);
+
+	return ret;
+}
+
+static int ams369fg06_panel_send_sequence(struct ams369fg06 *lcd,
+	const unsigned short *wbuf)
+{
+	int ret = 0, i = 0;
+
+	while ((wbuf[i] & DEFMASK) != ENDDEF) {
+		if ((wbuf[i] & DEFMASK) != SLEEPMSEC) {
+			ret = ams369fg06_spi_write(lcd, wbuf[i], wbuf[i+1]);
+			if (ret)
+				break;
+		} else
+			mdelay(wbuf[i+1]);
+		i += 2;
+	}
+
+	return ret;
+}
+
+static int _ams369fg06_gamma_ctl(struct ams369fg06 *lcd,
+	const unsigned int *gamma)
+{
+	unsigned int i = 0;
+	int ret = 0;
+
+	for (i = 0 ; i < GAMMA_TABLE_COUNT / 3; i++) {
+		ret = ams369fg06_spi_write(lcd, 0x40 + i, gamma[i]);
+		ret = ams369fg06_spi_write(lcd, 0x50 + i, gamma[i+7*1]);
+		ret = ams369fg06_spi_write(lcd, 0x60 + i, gamma[i+7*2]);
+		if (ret) {
+			dev_err(lcd->dev, "failed to set gamma table.\n");
+			goto gamma_err;
+		}
+	}
+
+gamma_err:
+	return ret;
+}
+
+static int ams369fg06_gamma_ctl(struct ams369fg06 *lcd, int brightness)
+{
+	int ret = 0;
+	int gamma = 0;
+
+	if ((brightness >= 0) && (brightness <= 50))
+		gamma = 0;
+	else if ((brightness > 50) && (brightness <= 100))
+		gamma = 1;
+	else if ((brightness > 100) && (brightness <= 150))
+		gamma = 2;
+	else if ((brightness > 150) && (brightness <= 200))
+		gamma = 3;
+	else if ((brightness > 200) && (brightness <= 255))
+		gamma = 4;
+
+	ret = _ams369fg06_gamma_ctl(lcd, gamma_table.gamma_22_table[gamma]);
+
+	return ret;
+}
+
+static int ams369fg06_ldi_init(struct ams369fg06 *lcd)
+{
+	int ret, i;
+	static const unsigned short *init_seq[] = {
+		seq_setting,
+		seq_stand_by_off,
+	};
+
+	for (i = 0; i < ARRAY_SIZE(init_seq); i++) {
+		ret = ams369fg06_panel_send_sequence(lcd, init_seq[i]);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+static int ams369fg06_ldi_enable(struct ams369fg06 *lcd)
+{
+	int ret, i;
+	static const unsigned short *init_seq[] = {
+		seq_stand_by_off,
+		seq_display_on,
+	};
+
+	for (i = 0; i < ARRAY_SIZE(init_seq); i++) {
+		ret = ams369fg06_panel_send_sequence(lcd, init_seq[i]);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+static int ams369fg06_ldi_disable(struct ams369fg06 *lcd)
+{
+	int ret, i;
+
+	static const unsigned short *init_seq[] = {
+		seq_display_off,
+		seq_stand_by_on,
+	};
+
+	for (i = 0; i < ARRAY_SIZE(init_seq); i++) {
+		ret = ams369fg06_panel_send_sequence(lcd, init_seq[i]);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+static int ams369fg06_power_is_on(int power)
+{
+	return ((power) <= FB_BLANK_NORMAL);
+}
+
+static int ams369fg06_power_on(struct ams369fg06 *lcd)
+{
+	int ret = 0;
+	struct lcd_platform_data *pd = NULL;
+	struct backlight_device *bd = NULL;
+
+	pd = lcd->lcd_pd;
+	if (!pd) {
+		dev_err(lcd->dev, "platform data is NULL.\n");
+		return -EFAULT;
+	}
+
+	bd = lcd->bd;
+	if (!bd) {
+		dev_err(lcd->dev, "backlight device is NULL.\n");
+		return -EFAULT;
+	}
+
+	if (!pd->power_on) {
+		dev_err(lcd->dev, "power_on is NULL.\n");
+		return -EFAULT;
+	} else {
+		pd->power_on(lcd->ld, 1);
+		mdelay(pd->power_on_delay);
+	}
+
+	if (!pd->reset) {
+		dev_err(lcd->dev, "reset is NULL.\n");
+		return -EFAULT;
+	} else {
+		pd->reset(lcd->ld);
+		mdelay(pd->reset_delay);
+	}
+
+	ret = ams369fg06_ldi_init(lcd);
+	if (ret) {
+		dev_err(lcd->dev, "failed to initialize ldi.\n");
+		return ret;
+	}
+
+	ret = ams369fg06_ldi_enable(lcd);
+	if (ret) {
+		dev_err(lcd->dev, "failed to enable ldi.\n");
+		return ret;
+	}
+
+	/* set brightness to current value after power on or resume. */
+	ret = ams369fg06_gamma_ctl(lcd, bd->props.brightness);
+	if (ret) {
+		dev_err(lcd->dev, "lcd gamma setting failed.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ams369fg06_power_off(struct ams369fg06 *lcd)
+{
+	int ret = 0;
+	struct lcd_platform_data *pd = NULL;
+
+	pd = lcd->lcd_pd;
+	if (!pd) {
+		dev_err(lcd->dev, "platform data is NULL\n");
+		return -EFAULT;
+	}
+
+	ret = ams369fg06_ldi_disable(lcd);
+	if (ret) {
+		dev_err(lcd->dev, "lcd setting failed.\n");
+		return -EIO;
+	}
+
+	mdelay(pd->power_off_delay);
+
+	if (!pd->power_on) {
+		dev_err(lcd->dev, "power_on is NULL.\n");
+		return -EFAULT;
+	} else
+		pd->power_on(lcd->ld, 0);
+
+	return 0;
+}
+
+static int ams369fg06_power(struct ams369fg06 *lcd, int power)
+{
+	int ret = 0;
+
+	if (ams369fg06_power_is_on(power) &&
+		!ams369fg06_power_is_on(lcd->power))
+		ret = ams369fg06_power_on(lcd);
+	else if (!ams369fg06_power_is_on(power) &&
+		ams369fg06_power_is_on(lcd->power))
+		ret = ams369fg06_power_off(lcd);
+
+	if (!ret)
+		lcd->power = power;
+
+	return ret;
+}
+
+static int ams369fg06_get_power(struct lcd_device *ld)
+{
+	struct ams369fg06 *lcd = lcd_get_data(ld);
+
+	return lcd->power;
+}
+
+static int ams369fg06_set_power(struct lcd_device *ld, int power)
+{
+	struct ams369fg06 *lcd = lcd_get_data(ld);
+
+	if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN &&
+		power != FB_BLANK_NORMAL) {
+		dev_err(lcd->dev, "power value should be 0, 1 or 4.\n");
+		return -EINVAL;
+	}
+
+	return ams369fg06_power(lcd, power);
+}
+
+static int ams369fg06_get_brightness(struct backlight_device *bd)
+{
+	return bd->props.brightness;
+}
+
+static int ams369fg06_set_brightness(struct backlight_device *bd)
+{
+	int ret = 0;
+	int brightness = bd->props.brightness;
+	struct ams369fg06 *lcd = dev_get_drvdata(&bd->dev);
+
+	if (brightness < MIN_BRIGHTNESS ||
+		brightness > bd->props.max_brightness) {
+		dev_err(&bd->dev, "lcd brightness should be %d to %d.\n",
+			MIN_BRIGHTNESS, MAX_BRIGHTNESS);
+		return -EINVAL;
+	}
+
+	ret = ams369fg06_gamma_ctl(lcd, bd->props.brightness);
+	if (ret) {
+		dev_err(&bd->dev, "lcd brightness setting failed.\n");
+		return -EIO;
+	}
+
+	return ret;
+}
+
+static struct lcd_ops ams369fg06_lcd_ops = {
+	.get_power = ams369fg06_get_power,
+	.set_power = ams369fg06_set_power,
+};
+
+static const struct backlight_ops ams369fg06_backlight_ops = {
+	.get_brightness = ams369fg06_get_brightness,
+	.update_status = ams369fg06_set_brightness,
+};
+
+static int __devinit ams369fg06_probe(struct spi_device *spi)
+{
+	int ret = 0;
+	struct ams369fg06 *lcd = NULL;
+	struct lcd_device *ld = NULL;
+	struct backlight_device *bd = NULL;
+	struct backlight_properties props;
+
+	lcd = kzalloc(sizeof(struct ams369fg06), GFP_KERNEL);
+	if (!lcd)
+		return -ENOMEM;
+
+	/* ams369fg06 lcd panel uses 3-wire 16bits SPI Mode. */
+	spi->bits_per_word = 16;
+
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		dev_err(&spi->dev, "spi setup failed.\n");
+		goto out_free_lcd;
+	}
+
+	lcd->spi = spi;
+	lcd->dev = &spi->dev;
+
+	lcd->lcd_pd = spi->dev.platform_data;
+	if (!lcd->lcd_pd) {
+		dev_err(&spi->dev, "platform data is NULL\n");
+		goto out_free_lcd;
+	}
+
+	ld = lcd_device_register("ams369fg06", &spi->dev, lcd,
+		&ams369fg06_lcd_ops);
+	if (IS_ERR(ld)) {
+		ret = PTR_ERR(ld);
+		goto out_free_lcd;
+	}
+
+	lcd->ld = ld;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = MAX_BRIGHTNESS;
+
+	bd = backlight_device_register("ams369fg06-bl", &spi->dev, lcd,
+		&ams369fg06_backlight_ops, &props);
+	if (IS_ERR(bd)) {
+		ret =  PTR_ERR(bd);
+		goto out_lcd_unregister;
+	}
+
+	bd->props.brightness = DEFAULT_BRIGHTNESS;
+	lcd->bd = bd;
+
+	if (!lcd->lcd_pd->lcd_enabled) {
+		/*
+		 * if lcd panel was off from bootloader then
+		 * current lcd status is powerdown and then
+		 * it enables lcd panel.
+		 */
+		lcd->power = FB_BLANK_POWERDOWN;
+
+		ams369fg06_power(lcd, FB_BLANK_UNBLANK);
+	} else
+		lcd->power = FB_BLANK_UNBLANK;
+
+	dev_set_drvdata(&spi->dev, lcd);
+
+	dev_info(&spi->dev, "ams369fg06 panel driver has been probed.\n");
+
+	return 0;
+
+out_lcd_unregister:
+	lcd_device_unregister(ld);
+out_free_lcd:
+	kfree(lcd);
+	return ret;
+}
+
+static int __devexit ams369fg06_remove(struct spi_device *spi)
+{
+	struct ams369fg06 *lcd = dev_get_drvdata(&spi->dev);
+
+	ams369fg06_power(lcd, FB_BLANK_POWERDOWN);
+	backlight_device_unregister(lcd->bd);
+	lcd_device_unregister(lcd->ld);
+	kfree(lcd);
+
+	return 0;
+}
+
+#if defined(CONFIG_PM)
+static unsigned int before_power;
+
+static int ams369fg06_suspend(struct spi_device *spi, pm_message_t mesg)
+{
+	int ret = 0;
+	struct ams369fg06 *lcd = dev_get_drvdata(&spi->dev);
+
+	dev_dbg(&spi->dev, "lcd->power = %d\n", lcd->power);
+
+	before_power = lcd->power;
+
+	/*
+	 * when lcd panel is suspend, lcd panel becomes off
+	 * regardless of status.
+	 */
+	ret = ams369fg06_power(lcd, FB_BLANK_POWERDOWN);
+
+	return ret;
+}
+
+static int ams369fg06_resume(struct spi_device *spi)
+{
+	int ret = 0;
+	struct ams369fg06 *lcd = dev_get_drvdata(&spi->dev);
+
+	/*
+	 * after suspended, if lcd panel status is FB_BLANK_UNBLANK
+	 * (at that time, before_power is FB_BLANK_UNBLANK) then
+	 * it changes that status to FB_BLANK_POWERDOWN to get lcd on.
+	 */
+	if (before_power == FB_BLANK_UNBLANK)
+		lcd->power = FB_BLANK_POWERDOWN;
+
+	dev_dbg(&spi->dev, "before_power = %d\n", before_power);
+
+	ret = ams369fg06_power(lcd, before_power);
+
+	return ret;
+}
+#else
+#define ams369fg06_suspend	NULL
+#define ams369fg06_resume	NULL
+#endif
+
+static void ams369fg06_shutdown(struct spi_device *spi)
+{
+	struct ams369fg06 *lcd = dev_get_drvdata(&spi->dev);
+
+	ams369fg06_power(lcd, FB_BLANK_POWERDOWN);
+}
+
+static struct spi_driver ams369fg06_driver = {
+	.driver = {
+		.name	= "ams369fg06",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ams369fg06_probe,
+	.remove		= __devexit_p(ams369fg06_remove),
+	.shutdown	= ams369fg06_shutdown,
+	.suspend	= ams369fg06_suspend,
+	.resume		= ams369fg06_resume,
+};
+
+static int __init ams369fg06_init(void)
+{
+	return spi_register_driver(&ams369fg06_driver);
+}
+
+static void __exit ams369fg06_exit(void)
+{
+	spi_unregister_driver(&ams369fg06_driver);
+}
+
+module_init(ams369fg06_init);
+module_exit(ams369fg06_exit);
+
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
+MODULE_DESCRIPTION("ams369fg06 LCD Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/ld9040.c b/drivers/video/backlight/ld9040.c
index 7281b2506a6..5934655eb1f 100644
--- a/drivers/video/backlight/ld9040.c
+++ b/drivers/video/backlight/ld9040.c
@@ -668,6 +668,7 @@ static int ld9040_probe(struct spi_device *spi)
 	struct ld9040 *lcd = NULL;
 	struct lcd_device *ld = NULL;
 	struct backlight_device *bd = NULL;
+	struct backlight_properties props;
 
 	lcd = kzalloc(sizeof(struct ld9040), GFP_KERNEL);
 	if (!lcd)
@@ -699,14 +700,17 @@ static int ld9040_probe(struct spi_device *spi)
 
 	lcd->ld = ld;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = MAX_BRIGHTNESS;
+
 	bd = backlight_device_register("ld9040-bl", &spi->dev,
-		lcd, &ld9040_backlight_ops, NULL);
-	if (IS_ERR(ld)) {
-		ret = PTR_ERR(ld);
-		goto out_free_lcd;
+		lcd, &ld9040_backlight_ops, &props);
+	if (IS_ERR(bd)) {
+		ret = PTR_ERR(bd);
+		goto out_unregister_lcd;
 	}
 
-	bd->props.max_brightness = MAX_BRIGHTNESS;
 	bd->props.brightness = MAX_BRIGHTNESS;
 	lcd->bd = bd;
 
@@ -731,6 +735,8 @@ static int ld9040_probe(struct spi_device *spi)
 	dev_info(&spi->dev, "ld9040 panel driver has been probed.\n");
 	return 0;
 
+out_unregister_lcd:
+	lcd_device_unregister(lcd->ld);
 out_free_lcd:
 	kfree(lcd);
 	return ret;
@@ -741,6 +747,7 @@ static int __devexit ld9040_remove(struct spi_device *spi)
 	struct ld9040 *lcd = dev_get_drvdata(&spi->dev);
 
 	ld9040_power(lcd, FB_BLANK_POWERDOWN);
+	backlight_device_unregister(lcd->bd);
 	lcd_device_unregister(lcd->ld);
 	kfree(lcd);
 
diff --git a/drivers/video/backlight/s6e63m0.c b/drivers/video/backlight/s6e63m0.c
index 322040f686c..694e5aab0d6 100644
--- a/drivers/video/backlight/s6e63m0.c
+++ b/drivers/video/backlight/s6e63m0.c
@@ -738,6 +738,7 @@ static int __devinit s6e63m0_probe(struct spi_device *spi)
 	struct s6e63m0 *lcd = NULL;
 	struct lcd_device *ld = NULL;
 	struct backlight_device *bd = NULL;
+	struct backlight_properties props;
 
 	lcd = kzalloc(sizeof(struct s6e63m0), GFP_KERNEL);
 	if (!lcd)
@@ -769,16 +770,18 @@ static int __devinit s6e63m0_probe(struct spi_device *spi)
 
 	lcd->ld = ld;
 
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = MAX_BRIGHTNESS;
+
 	bd = backlight_device_register("s6e63m0bl-bl", &spi->dev, lcd,
-		&s6e63m0_backlight_ops, NULL);
+		&s6e63m0_backlight_ops, &props);
 	if (IS_ERR(bd)) {
 		ret =  PTR_ERR(bd);
 		goto out_lcd_unregister;
 	}
 
-	bd->props.max_brightness = MAX_BRIGHTNESS;
 	bd->props.brightness = MAX_BRIGHTNESS;
-	bd->props.type = BACKLIGHT_RAW;
 	lcd->bd = bd;
 
 	/*
@@ -840,7 +843,7 @@ static int __devexit s6e63m0_remove(struct spi_device *spi)
 }
 
 #if defined(CONFIG_PM)
-unsigned int before_power;
+static unsigned int before_power;
 
 static int s6e63m0_suspend(struct spi_device *spi, pm_message_t mesg)
 {
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index 03bc471c3ee..f815283667a 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -26,6 +26,36 @@ config XEN_SELFBALLOONING
 	  kernel boot parameter.  Note that systems without a sufficiently
 	  large swap device should not enable self-ballooning.
 
+config XEN_BALLOON_MEMORY_HOTPLUG
+	bool "Memory hotplug support for Xen balloon driver"
+	default n
+	depends on XEN_BALLOON && MEMORY_HOTPLUG
+	help
+	  Memory hotplug support for Xen balloon driver allows expanding memory
+	  available for the system above limit declared at system startup.
+	  It is very useful on critical systems which require long
+	  run without rebooting.
+
+	  Memory could be hotplugged in following steps:
+
+	    1) dom0: xl mem-max <domU> <maxmem>
+	       where <maxmem> is >= requested memory size,
+
+	    2) dom0: xl mem-set <domU> <memory>
+	       where <memory> is requested memory size; alternatively memory
+	       could be added by writing proper value to
+	       /sys/devices/system/xen_memory/xen_memory0/target or
+	       /sys/devices/system/xen_memory/xen_memory0/target_kb on dumU,
+
+	    3) domU: for i in /sys/devices/system/memory/memory*/state; do \
+	               [ "`cat "$i"`" = offline ] && echo online > "$i"; done
+
+	  Memory could be onlined automatically on domU by adding following line to udev rules:
+
+	  SUBSYSTEM=="memory", ACTION=="add", RUN+="/bin/sh -c '[ -f /sys$devpath/state ] && echo online > /sys$devpath/state'"
+
+	  In that case step 3 should be omitted.
+
 config XEN_SCRUB_PAGES
 	bool "Scrub pages before returning them to system"
 	depends on XEN_BALLOON
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index f54290baa3d..5dfd8f8ff07 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -4,6 +4,12 @@
  * Copyright (c) 2003, B Dragovic
  * Copyright (c) 2003-2004, M Williamson, K Fraser
  * Copyright (c) 2005 Dan M. Smith, IBM Corporation
+ * Copyright (c) 2010 Daniel Kiper
+ *
+ * Memory hotplug support was written by Daniel Kiper. Work on
+ * it was sponsored by Google under Google Summer of Code 2010
+ * program. Jeremy Fitzhardinge from Citrix was the mentor for
+ * this project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License version 2
@@ -40,6 +46,9 @@
 #include <linux/mutex.h>
 #include <linux/list.h>
 #include <linux/gfp.h>
+#include <linux/notifier.h>
+#include <linux/memory.h>
+#include <linux/memory_hotplug.h>
 
 #include <asm/page.h>
 #include <asm/pgalloc.h>
@@ -194,6 +203,87 @@ static enum bp_state update_schedule(enum bp_state state)
 	return BP_EAGAIN;
 }
 
+#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
+static long current_credit(void)
+{
+	return balloon_stats.target_pages - balloon_stats.current_pages -
+		balloon_stats.hotplug_pages;
+}
+
+static bool balloon_is_inflated(void)
+{
+	if (balloon_stats.balloon_low || balloon_stats.balloon_high ||
+			balloon_stats.balloon_hotplug)
+		return true;
+	else
+		return false;
+}
+
+/*
+ * reserve_additional_memory() adds memory region of size >= credit above
+ * max_pfn. New region is section aligned and size is modified to be multiple
+ * of section size. Those features allow optimal use of address space and
+ * establish proper alignment when this function is called first time after
+ * boot (last section not fully populated at boot time contains unused memory
+ * pages with PG_reserved bit not set; online_pages_range() does not allow page
+ * onlining in whole range if first onlined page does not have PG_reserved
+ * bit set). Real size of added memory is established at page onlining stage.
+ */
+
+static enum bp_state reserve_additional_memory(long credit)
+{
+	int nid, rc;
+	u64 hotplug_start_paddr;
+	unsigned long balloon_hotplug = credit;
+
+	hotplug_start_paddr = PFN_PHYS(SECTION_ALIGN_UP(max_pfn));
+	balloon_hotplug = round_up(balloon_hotplug, PAGES_PER_SECTION);
+	nid = memory_add_physaddr_to_nid(hotplug_start_paddr);
+
+	rc = add_memory(nid, hotplug_start_paddr, balloon_hotplug << PAGE_SHIFT);
+
+	if (rc) {
+		pr_info("xen_balloon: %s: add_memory() failed: %i\n", __func__, rc);
+		return BP_EAGAIN;
+	}
+
+	balloon_hotplug -= credit;
+
+	balloon_stats.hotplug_pages += credit;
+	balloon_stats.balloon_hotplug = balloon_hotplug;
+
+	return BP_DONE;
+}
+
+static void xen_online_page(struct page *page)
+{
+	__online_page_set_limits(page);
+
+	mutex_lock(&balloon_mutex);
+
+	__balloon_append(page);
+
+	if (balloon_stats.hotplug_pages)
+		--balloon_stats.hotplug_pages;
+	else
+		--balloon_stats.balloon_hotplug;
+
+	mutex_unlock(&balloon_mutex);
+}
+
+static int xen_memory_notifier(struct notifier_block *nb, unsigned long val, void *v)
+{
+	if (val == MEM_ONLINE)
+		schedule_delayed_work(&balloon_worker, 0);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block xen_memory_nb = {
+	.notifier_call = xen_memory_notifier,
+	.priority = 0
+};
+#else
 static long current_credit(void)
 {
 	unsigned long target = balloon_stats.target_pages;
@@ -206,6 +296,21 @@ static long current_credit(void)
 	return target - balloon_stats.current_pages;
 }
 
+static bool balloon_is_inflated(void)
+{
+	if (balloon_stats.balloon_low || balloon_stats.balloon_high)
+		return true;
+	else
+		return false;
+}
+
+static enum bp_state reserve_additional_memory(long credit)
+{
+	balloon_stats.target_pages = balloon_stats.current_pages;
+	return BP_DONE;
+}
+#endif /* CONFIG_XEN_BALLOON_MEMORY_HOTPLUG */
+
 static enum bp_state increase_reservation(unsigned long nr_pages)
 {
 	int rc;
@@ -217,6 +322,15 @@ static enum bp_state increase_reservation(unsigned long nr_pages)
 		.domid        = DOMID_SELF
 	};
 
+#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
+	if (!balloon_stats.balloon_low && !balloon_stats.balloon_high) {
+		nr_pages = min(nr_pages, balloon_stats.balloon_hotplug);
+		balloon_stats.hotplug_pages += nr_pages;
+		balloon_stats.balloon_hotplug -= nr_pages;
+		return BP_DONE;
+	}
+#endif
+
 	if (nr_pages > ARRAY_SIZE(frame_list))
 		nr_pages = ARRAY_SIZE(frame_list);
 
@@ -279,6 +393,15 @@ static enum bp_state decrease_reservation(unsigned long nr_pages, gfp_t gfp)
 		.domid        = DOMID_SELF
 	};
 
+#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
+	if (balloon_stats.hotplug_pages) {
+		nr_pages = min(nr_pages, balloon_stats.hotplug_pages);
+		balloon_stats.hotplug_pages -= nr_pages;
+		balloon_stats.balloon_hotplug += nr_pages;
+		return BP_DONE;
+	}
+#endif
+
 	if (nr_pages > ARRAY_SIZE(frame_list))
 		nr_pages = ARRAY_SIZE(frame_list);
 
@@ -340,8 +463,12 @@ static void balloon_process(struct work_struct *work)
 	do {
 		credit = current_credit();
 
-		if (credit > 0)
-			state = increase_reservation(credit);
+		if (credit > 0) {
+			if (balloon_is_inflated())
+				state = increase_reservation(credit);
+			else
+				state = reserve_additional_memory(credit);
+		}
 
 		if (credit < 0)
 			state = decrease_reservation(-credit, GFP_BALLOON);
@@ -448,6 +575,14 @@ static int __init balloon_init(void)
 	balloon_stats.retry_count = 1;
 	balloon_stats.max_retry_count = RETRY_UNLIMITED;
 
+#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG
+	balloon_stats.hotplug_pages = 0;
+	balloon_stats.balloon_hotplug = 0;
+
+	set_online_page_callback(&xen_online_page);
+	register_memory_notifier(&xen_memory_nb);
+#endif
+
 	/*
 	 * Initialise the balloon with excess memory space.  We need
 	 * to make sure we don't add memory which doesn't exist or