Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...

1 files changed, 18 insertions, 19 deletions

diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 2036d21baae..d50bbe59da1 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -207,11 +207,12 @@ static int decompress_exec(
 
 	/* Read in first chunk of data and parse gzip header. */
 	fpos = offset;
-	ret = bprm->file->f_op->read(bprm->file, buf, LBUFSIZE, &fpos);
+	ret = kernel_read(bprm->file, offset, buf, LBUFSIZE);
 
 	strm.next_in = buf;
 	strm.avail_in = ret;
 	strm.total_in = 0;
+	fpos += ret;
 
 	retval = -ENOEXEC;
 
@@ -277,7 +278,7 @@ static int decompress_exec(
 	}
 
 	while ((ret = zlib_inflate(&strm, Z_NO_FLUSH)) == Z_OK) {
-		ret = bprm->file->f_op->read(bprm->file, buf, LBUFSIZE, &fpos);
+		ret = kernel_read(bprm->file, fpos, buf, LBUFSIZE);
 		if (ret <= 0)
 			break;
 		len -= ret;
@@ -285,6 +286,7 @@ static int decompress_exec(
 		strm.next_in = buf;
 		strm.avail_in = ret;
 		strm.total_in = 0;
+		fpos += ret;
 	}
 
 	if (ret < 0) {
@@ -428,6 +430,7 @@ static int load_flat_file(struct linux_binprm * bprm,
 	unsigned long textpos = 0, datapos = 0, result;
 	unsigned long realdatastart = 0;
 	unsigned long text_len, data_len, bss_len, stack_len, flags;
+	unsigned long full_data;
 	unsigned long len, memp = 0;
 	unsigned long memp_size, extra, rlim;
 	unsigned long *reloc = 0, *rp;
@@ -451,6 +454,7 @@ static int load_flat_file(struct linux_binprm * bprm,
 	relocs    = ntohl(hdr->reloc_count);
 	flags     = ntohl(hdr->flags);
 	rev       = ntohl(hdr->rev);
+	full_data = data_len + relocs * sizeof(unsigned long);
 
 	if (strncmp(hdr->magic, "bFLT", 4)) {
 		/*
@@ -577,12 +581,12 @@ static int load_flat_file(struct linux_binprm * bprm,
 #ifdef CONFIG_BINFMT_ZFLAT
 		if (flags & FLAT_FLAG_GZDATA) {
 			result = decompress_exec(bprm, fpos, (char *) datapos, 
-						 data_len + (relocs * sizeof(unsigned long)), 0);
+						 full_data, 0);
 		} else
 #endif
 		{
-			result = bprm->file->f_op->read(bprm->file, (char *) datapos,
-					data_len + (relocs * sizeof(unsigned long)), &fpos);
+			result = read_code(bprm->file, datapos, fpos,
+					full_data);
 		}
 		if (IS_ERR_VALUE(result)) {
 			printk("Unable to read data+bss, errno %d\n", (int)-result);
@@ -627,30 +631,25 @@ static int load_flat_file(struct linux_binprm * bprm,
 		if (flags & FLAT_FLAG_GZIP) {
 			result = decompress_exec(bprm, sizeof (struct flat_hdr),
 					 (((char *) textpos) + sizeof (struct flat_hdr)),
-					 (text_len + data_len + (relocs * sizeof(unsigned long))
+					 (text_len + full_data
 						  - sizeof (struct flat_hdr)),
 					 0);
 			memmove((void *) datapos, (void *) realdatastart,
-					data_len + (relocs * sizeof(unsigned long)));
+					full_data);
 		} else if (flags & FLAT_FLAG_GZDATA) {
-			fpos = 0;
-			result = bprm->file->f_op->read(bprm->file,
-					(char *) textpos, text_len, &fpos);
+			result = read_code(bprm->file, textpos, 0, text_len);
 			if (!IS_ERR_VALUE(result))
 				result = decompress_exec(bprm, text_len, (char *) datapos,
-						 data_len + (relocs * sizeof(unsigned long)), 0);
+						 full_data, 0);
 		}
 		else
 #endif
 		{
-			fpos = 0;
-			result = bprm->file->f_op->read(bprm->file,
-					(char *) textpos, text_len, &fpos);
-			if (!IS_ERR_VALUE(result)) {
-				fpos = ntohl(hdr->data_start);
-				result = bprm->file->f_op->read(bprm->file, (char *) datapos,
-					data_len + (relocs * sizeof(unsigned long)), &fpos);
-			}
+			result = read_code(bprm->file, textpos, 0, text_len);
+			if (!IS_ERR_VALUE(result))
+				result = read_code(bprm->file, datapos,
+						   ntohl(hdr->data_start),
+						   full_data);
 		}
 		if (IS_ERR_VALUE(result)) {
 			printk("Unable to read code+data+bss, errno %d\n",(int)-result);