Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (61 commits)
  jbd2: Add MAINTAINERS entry
  jbd2: fix a potential leak of a journal_head on an error path
  ext4: teach ext4_ext_split to calculate extents efficiently
  ext4: Convert ext4 to new truncate calling convention
  ext4: do not normalize block requests from fallocate()
  ext4: enable "punch hole" functionality
  ext4: add "punch hole" flag to ext4_map_blocks()
  ext4: punch out extents
  ext4: add new function ext4_block_zero_page_range()
  ext4: add flag to ext4_has_free_blocks
  ext4: reserve inodes and feature code for 'quota' feature
  ext4: add support for multiple mount protection
  ext4: ensure f_bfree returned by ext4_statfs() is non-negative
  ext4: protect bb_first_free in ext4_trim_all_free() with group lock
  ext4: only load buddy bitmap in ext4_trim_fs() when it is needed
  jbd2: Fix comment to match the code in jbd2__journal_start()
  ext4: fix waiting and sending of a barrier in ext4_sync_file()
  jbd2: Add function jbd2_trans_will_send_data_barrier()
  jbd2: fix sending of data flush on journal commit
  ext4: fix ext4_ext_fiemap_cb() to handle blocks before request range correctly
  ...

3 files changed, 87 insertions, 15 deletions

diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 29148a81c78..7f21cf3aaf9 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -219,7 +219,6 @@ static int journal_submit_data_buffers(journal_t *journal,
 			ret = err;
 		spin_lock(&journal->j_list_lock);
 		J_ASSERT(jinode->i_transaction == commit_transaction);
-		commit_transaction->t_flushed_data_blocks = 1;
 		clear_bit(__JI_COMMIT_RUNNING, &jinode->i_flags);
 		smp_mb__after_clear_bit();
 		wake_up_bit(&jinode->i_flags, __JI_COMMIT_RUNNING);
@@ -672,12 +671,16 @@ start_journal_io:
 		err = 0;
 	}
 
+	write_lock(&journal->j_state_lock);
+	J_ASSERT(commit_transaction->t_state == T_COMMIT);
+	commit_transaction->t_state = T_COMMIT_DFLUSH;
+	write_unlock(&journal->j_state_lock);
 	/* 
 	 * If the journal is not located on the file system device,
 	 * then we must flush the file system device before we issue
 	 * the commit record
 	 */
-	if (commit_transaction->t_flushed_data_blocks &&
+	if (commit_transaction->t_need_data_flush &&
 	    (journal->j_fs_dev != journal->j_dev) &&
 	    (journal->j_flags & JBD2_BARRIER))
 		blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL);
@@ -754,8 +757,13 @@ wait_for_iobuf:
                    required. */
 		JBUFFER_TRACE(jh, "file as BJ_Forget");
 		jbd2_journal_file_buffer(jh, commit_transaction, BJ_Forget);
-		/* Wake up any transactions which were waiting for this
-		   IO to complete */
+		/*
+		 * Wake up any transactions which were waiting for this IO to
+		 * complete. The barrier must be here so that changes by
+		 * jbd2_journal_file_buffer() take effect before wake_up_bit()
+		 * does the waitqueue check.
+		 */
+		smp_mb();
 		wake_up_bit(&bh->b_state, BH_Unshadow);
 		JBUFFER_TRACE(jh, "brelse shadowed buffer");
 		__brelse(bh);
@@ -794,6 +802,10 @@ wait_for_iobuf:
 		jbd2_journal_abort(journal, err);
 
 	jbd_debug(3, "JBD: commit phase 5\n");
+	write_lock(&journal->j_state_lock);
+	J_ASSERT(commit_transaction->t_state == T_COMMIT_DFLUSH);
+	commit_transaction->t_state = T_COMMIT_JFLUSH;
+	write_unlock(&journal->j_state_lock);
 
 	if (!JBD2_HAS_INCOMPAT_FEATURE(journal,
 				       JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)) {
@@ -949,7 +961,7 @@ restart_loop:
 
 	jbd_debug(3, "JBD: commit phase 7\n");
 
-	J_ASSERT(commit_transaction->t_state == T_COMMIT);
+	J_ASSERT(commit_transaction->t_state == T_COMMIT_JFLUSH);
 
 	commit_transaction->t_start = jiffies;
 	stats.run.rs_logging = jbd2_time_diff(stats.run.rs_logging,
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index e0ec3db1c39..9a782699030 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -479,9 +479,12 @@ int __jbd2_log_space_left(journal_t *journal)
 int __jbd2_log_start_commit(journal_t *journal, tid_t target)
 {
 	/*
-	 * Are we already doing a recent enough commit?
+	 * The only transaction we can possibly wait upon is the
+	 * currently running transaction (if it exists).  Otherwise,
+	 * the target tid must be an old one.
 	 */
-	if (!tid_geq(journal->j_commit_request, target)) {
+	if (journal->j_running_transaction &&
+	    journal->j_running_transaction->t_tid == target) {
 		/*
 		 * We want a new commit: OK, mark the request and wakeup the
 		 * commit thread.  We do _not_ do the commit ourselves.
@@ -493,7 +496,15 @@ int __jbd2_log_start_commit(journal_t *journal, tid_t target)
 			  journal->j_commit_sequence);
 		wake_up(&journal->j_wait_commit);
 		return 1;
-	}
+	} else if (!tid_geq(journal->j_commit_request, target))
+		/* This should never happen, but if it does, preserve
+		   the evidence before kjournald goes into a loop and
+		   increments j_commit_sequence beyond all recognition. */
+		WARN_ONCE(1, "jbd: bad log_start_commit: %u %u %u %u\n",
+			  journal->j_commit_request,
+			  journal->j_commit_sequence,
+			  target, journal->j_running_transaction ? 
+			  journal->j_running_transaction->t_tid : 0);
 	return 0;
 }
 
@@ -577,6 +588,47 @@ int jbd2_journal_start_commit(journal_t *journal, tid_t *ptid)
 }
 
 /*
+ * Return 1 if a given transaction has not yet sent barrier request
+ * connected with a transaction commit. If 0 is returned, transaction
+ * may or may not have sent the barrier. Used to avoid sending barrier
+ * twice in common cases.
+ */
+int jbd2_trans_will_send_data_barrier(journal_t *journal, tid_t tid)
+{
+	int ret = 0;
+	transaction_t *commit_trans;
+
+	if (!(journal->j_flags & JBD2_BARRIER))
+		return 0;
+	read_lock(&journal->j_state_lock);
+	/* Transaction already committed? */
+	if (tid_geq(journal->j_commit_sequence, tid))
+		goto out;
+	commit_trans = journal->j_committing_transaction;
+	if (!commit_trans || commit_trans->t_tid != tid) {
+		ret = 1;
+		goto out;
+	}
+	/*
+	 * Transaction is being committed and we already proceeded to
+	 * submitting a flush to fs partition?
+	 */
+	if (journal->j_fs_dev != journal->j_dev) {
+		if (!commit_trans->t_need_data_flush ||
+		    commit_trans->t_state >= T_COMMIT_DFLUSH)
+			goto out;
+	} else {
+		if (commit_trans->t_state >= T_COMMIT_JFLUSH)
+			goto out;
+	}
+	ret = 1;
+out:
+	read_unlock(&journal->j_state_lock);
+	return ret;
+}
+EXPORT_SYMBOL(jbd2_trans_will_send_data_barrier);
+
+/*
  * Wait for a specified commit to complete.
  * The caller may not hold the journal lock.
  */
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 05fa77a2371..3eec82d32fd 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -82,7 +82,7 @@ jbd2_get_transaction(journal_t *journal, transaction_t *transaction)
  */
 
 /*
- * Update transiaction's maximum wait time, if debugging is enabled.
+ * Update transaction's maximum wait time, if debugging is enabled.
  *
  * In order for t_max_wait to be reliable, it must be protected by a
  * lock.  But doing so will mean that start_this_handle() can not be
@@ -91,11 +91,10 @@ jbd2_get_transaction(journal_t *journal, transaction_t *transaction)
  * means that maximum wait time reported by the jbd2_run_stats
  * tracepoint will always be zero.
  */
-static inline void update_t_max_wait(transaction_t *transaction)
+static inline void update_t_max_wait(transaction_t *transaction,
+				     unsigned long ts)
 {
 #ifdef CONFIG_JBD2_DEBUG
-	unsigned long ts = jiffies;
-
 	if (jbd2_journal_enable_debug &&
 	    time_after(transaction->t_start, ts)) {
 		ts = jbd2_time_diff(ts, transaction->t_start);
@@ -121,6 +120,7 @@ static int start_this_handle(journal_t *journal, handle_t *handle,
 	tid_t		tid;
 	int		needed, need_to_start;
 	int		nblocks = handle->h_buffer_credits;
+	unsigned long ts = jiffies;
 
 	if (nblocks > journal->j_max_transaction_buffers) {
 		printk(KERN_ERR "JBD: %s wants too many credits (%d > %d)\n",
@@ -271,7 +271,7 @@ repeat:
 	/* OK, account for the buffers that this operation expects to
 	 * use and add the handle to the running transaction. 
 	 */
-	update_t_max_wait(transaction);
+	update_t_max_wait(transaction, ts);
 	handle->h_transaction = transaction;
 	atomic_inc(&transaction->t_updates);
 	atomic_inc(&transaction->t_handle_count);
@@ -316,7 +316,8 @@ static handle_t *new_handle(int nblocks)
  * This function is visible to journal users (like ext3fs), so is not
  * called with the journal already locked.
  *
- * Return a pointer to a newly allocated handle, or NULL on failure
+ * Return a pointer to a newly allocated handle, or an ERR_PTR() value
+ * on failure.
  */
 handle_t *jbd2__journal_start(journal_t *journal, int nblocks, int gfp_mask)
 {
@@ -921,8 +922,8 @@ int jbd2_journal_get_create_access(handle_t *handle, struct buffer_head *bh)
 	 */
 	JBUFFER_TRACE(jh, "cancelling revoke");
 	jbd2_journal_cancel_revoke(handle, jh);
-	jbd2_journal_put_journal_head(jh);
 out:
+	jbd2_journal_put_journal_head(jh);
 	return err;
 }
 
@@ -2147,6 +2148,13 @@ int jbd2_journal_file_inode(handle_t *handle, struct jbd2_inode *jinode)
 	    jinode->i_next_transaction == transaction)
 		goto done;
 
+	/*
+	 * We only ever set this variable to 1 so the test is safe. Since
+	 * t_need_data_flush is likely to be set, we do the test to save some
+	 * cacheline bouncing
+	 */
+	if (!transaction->t_need_data_flush)
+		transaction->t_need_data_flush = 1;
 	/* On some different transaction's list - should be
 	 * the committing one */
 	if (jinode->i_transaction) {