diff options
| author | David Brownell <dbrownell@users.sourceforge.net> | 2008-01-05 13:21:43 -0800 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2008-02-01 14:35:01 -0800 |
| commit | f3db6e82034a6ea89191fdcc6b9a984dc0d5d533 (patch) | |
| tree | 5ae328679bef284fc5fad4dd74137c1a52abcd61 /include/asm-arm/arch-at91/board.h | |
| parent | 4bde4a4c4ff53e67cde4b0fe630d6fc28106bff8 (diff) | |
USB: at91_udc uses generic GPIO calls; minor cleanup
Various small at91_udc cleanups:
- Use generic GPIO calls, not older platform-specific ones
- Use gpio_request()/gpio_free()
- Use VERBOSE_DEBUG convention, not older VERBOSE
- Fix sparse complaint about parameter type (changed to gfp_t)
- Add missing newline to some rarely-seen debug messages
- Fix some old cleanup bugs on probe() fault paths
Also add a mechanism whereby rm9200 gpios can drive the D+ pullup
through an inverting transistor, based on a patch from Steve Birtles.
Most UDC drivers supporting a GPIO based pullup should probably have
such an option, but testing it requries such a board in hand!
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Steve Birtles <arm_kernel_development@micromark.net.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'include/asm-arm/arch-at91/board.h')
| -rw-r--r-- | include/asm-arm/arch-at91/board.h | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h index 55b07bd5316..dc189f01c5b 100644 --- a/include/asm-arm/arch-at91/board.h +++ b/include/asm-arm/arch-at91/board.h @@ -40,7 +40,8 @@ /* USB Device */ struct at91_udc_data { u8 vbus_pin; /* high == host powering us */ - u8 pullup_pin; /* high == D+ pulled up */ + u8 pullup_pin; /* active == D+ pulled up */ + u8 pullup_active_low; /* true == pullup_pin is active low */ }; extern void __init at91_add_device_udc(struct at91_udc_data *data); |