Merge ../linus

Conflicts:

	drivers/char/agp/Kconfig

16 files changed, 454 insertions, 139 deletions

diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h b/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h
new file mode 100644
index 00000000000..bff5ea45f60
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200_spi.h
@@ -0,0 +1,81 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91rm9200_spi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Serial Peripheral Interface (SPI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_SPI_H
+#define AT91RM9200_SPI_H
+
+#define AT91_SPI_CR			0x00		/* Control Register */
+#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
+#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
+#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
+#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_MR			0x04		/* Mode Register */
+#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
+#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
+#define			AT91_SPI_PS_FIXED	(0 << 1)
+#define			AT91_SPI_PS_VARIABLE	(1 << 1)
+#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
+#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection */
+#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
+#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
+#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
+
+#define AT91_SPI_RDR		0x08			/* Receive Data Register */
+#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+
+#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
+#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_SR		0x10			/* Status Register */
+#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
+#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
+#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
+#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
+#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
+#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
+#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
+#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
+#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
+#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
+#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
+
+#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
+#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
+#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
+
+#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
+#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
+#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
+#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
+#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
+#define			AT91_SPI_BITS_8		(0 << 4)
+#define			AT91_SPI_BITS_9		(1 << 4)
+#define			AT91_SPI_BITS_10	(2 << 4)
+#define			AT91_SPI_BITS_11	(3 << 4)
+#define			AT91_SPI_BITS_12	(4 << 4)
+#define			AT91_SPI_BITS_13	(5 << 4)
+#define			AT91_SPI_BITS_14	(6 << 4)
+#define			AT91_SPI_BITS_15	(7 << 4)
+#define			AT91_SPI_BITS_16	(8 << 4)
+#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
+#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
+#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h b/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h
new file mode 100644
index 00000000000..ac880227147
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h
@@ -0,0 +1,96 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91rm9200_ssc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Serial Synchronous Controller (SSC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_SSC_H
+#define AT91RM9200_SSC_H
+
+#define AT91_SSC_CR		0x00	/* Control Register */
+#define		AT91_SSC_RXEN		(1 <<  0)	/* Receive Enable */
+#define		AT91_SSC_RXDIS		(1 <<  1)	/* Receive Disable */
+#define		AT91_SSC_TXEN		(1 <<  8)	/* Transmit Enable */
+#define		AT91_SSC_TXDIS		(1 <<  9)	/* Transmit Disable */
+#define		AT91_SSC_SWRST		(1 << 15)	/* Software Reset */
+
+#define AT91_SSC_CMR		0x04	/* Clock Mode Register */
+#define		AT91_SSC_CMR_DIV	(0xfff << 0)	/* Clock Divider */
+
+#define AT91_SSC_RCMR		0x10	/* Receive Clock Mode Register */
+#define		AT91_SSC_CKS		(3    <<  0)	/* Clock Selection */
+#define			AT91_SSC_CKS_DIV		(0 << 0)
+#define			AT91_SSC_CKS_CLOCK		(1 << 0)
+#define			AT91_SSC_CKS_PIN		(2 << 0)
+#define		AT91_SSC_CKO		(7    <<  2)	/* Clock Output Mode Selection */
+#define			AT91_SSC_CKO_NONE		(0 << 2)
+#define			AT91_SSC_CKO_CONTINUOUS		(1 << 2)
+#define		AT91_SSC_CKI		(1    <<  5)	/* Clock Inversion */
+#define			AT91_SSC_CKI_FALLING		(0 << 5)
+#define			AT91_SSC_CK_RISING		(1 << 5)
+#define		AT91_SSC_START		(0xf  <<  8)	/* Start Selection */
+#define			AT91_SSC_START_CONTINUOUS	(0 << 8)
+#define			AT91_SSC_START_TX_RX		(1 << 8)
+#define			AT91_SSC_START_LOW_RF		(2 << 8)
+#define			AT91_SSC_START_HIGH_RF		(3 << 8)
+#define			AT91_SSC_START_FALLING_RF	(4 << 8)
+#define			AT91_SSC_START_RISING_RF	(5 << 8)
+#define			AT91_SSC_START_LEVEL_RF		(6 << 8)
+#define			AT91_SSC_START_EDGE_RF		(7 << 8)
+#define		AT91_SSC_STTDLY		(0xff << 16)	/* Start Delay */
+#define		AT91_SSC_PERIOD		(0xff << 24)	/* Period Divider Selection */
+
+#define AT91_SSC_RFMR		0x14	/* Receive Frame Mode Register */
+#define		AT91_SSC_DATALEN	(0x1f <<  0)	/* Data Length */
+#define		AT91_SSC_LOOP		(1    <<  5)	/* Loop Mode */
+#define		AT91_SSC_MSBF		(1    <<  7)	/* Most Significant Bit First */
+#define		AT91_SSC_DATNB		(0xf  <<  8)	/* Data Number per Frame */
+#define		AT91_SSC_FSLEN		(0xf  << 16)	/* Frame Sync Length */
+#define		AT91_SSC_FSOS		(7    << 20)	/* Frame Sync Output Selection */
+#define			AT91_SSC_FSOS_NONE		(0 << 20)
+#define			AT91_SSC_FSOS_NEGATIVE		(1 << 20)
+#define			AT91_SSC_FSOS_POSITIVE		(2 << 20)
+#define			AT91_SSC_FSOS_LOW		(3 << 20)
+#define			AT91_SSC_FSOS_HIGH		(4 << 20)
+#define			AT91_SSC_FSOS_TOGGLE		(5 << 20)
+#define		AT91_SSC_FSEDGE		(1    << 24)	/* Frame Sync Edge Detection */
+#define			AT91_SSC_FSEDGE_POSITIVE	(0 << 24)
+#define			AT91_SSC_FSEDGE_NEGATIVE	(1 << 24)
+
+#define AT91_SSC_TCMR		0x18	/* Transmit Clock Mode Register */
+#define AT91_SSC_TFMR		0x1c	/* Transmit Fram Mode Register */
+#define		AT91_SSC_DATDEF		(1 <<  5)	/* Data Default Value */
+#define		AT91_SSC_FSDEN		(1 << 23)	/* Frame Sync Data Enable */
+
+#define AT91_SSC_RHR		0x20	/* Receive Holding Register */
+#define AT91_SSC_THR		0x24	/* Transmit Holding Register */
+#define AT91_SSC_RSHR		0x30	/* Receive Sync Holding Register */
+#define AT91_SSC_TSHR		0x34	/* Transmit Sync Holding Register */
+
+#define AT91_SSC_SR		0x40	/* Status Register */
+#define		AT91_SSC_TXRDY		(1 <<  0)	/* Transmit Ready */
+#define		AT91_SSC_TXEMPTY	(1 <<  1)	/* Transmit Empty */
+#define		AT91_SSC_ENDTX		(1 <<  2)	/* End of Transmission */
+#define		AT91_SSC_TXBUFE		(1 <<  3)	/* Transmit Buffer Empty */
+#define		AT91_SSC_RXRDY		(1 <<  4)	/* Receive Ready */
+#define		AT91_SSC_OVRUN		(1 <<  5)	/* Receive Overrun */
+#define		AT91_SSC_ENDRX		(1 <<  6)	/* End of Reception */
+#define		AT91_SSC_RXBUFF		(1 <<  7)	/* Receive Buffer Full */
+#define		AT91_SSC_TXSYN		(1 << 10)	/* Transmit Sync */
+#define		AT91_SSC_RXSYN		(1 << 11)	/* Receive Sync */
+#define		AT91_SSC_TXENA		(1 << 16)	/* Transmit Enable */
+#define		AT91_SSC_RXENA		(1 << 17)	/* Receive Enable */
+
+#define AT91_SSC_IER		0x44	/* Interrupt Enable Register */
+#define AT91_SSC_IDR		0x48	/* Interrupt Disable Register */
+#define AT91_SSC_IMR		0x4c	/* Interrupt Mask Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h b/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h
index 2910d359f91..0f4c12d5f0c 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200_sys.h
@@ -68,8 +68,17 @@
 #define AT91_DBGU_RHR		(AT91_DBGU + 0x18)	/* Receiver Holding Register */
 #define AT91_DBGU_THR		(AT91_DBGU + 0x1c)	/* Transmitter Holding Register */
 #define AT91_DBGU_BRGR		(AT91_DBGU + 0x20)	/* Baud Rate Generator Register */
+
 #define AT91_DBGU_CIDR		(AT91_DBGU + 0x40)	/* Chip ID Register */
 #define AT91_DBGU_EXID		(AT91_DBGU + 0x44)	/* Chip ID Extension Register */
+#define		AT91_CIDR_VERSION	(0x1f << 0)		/* Version of the Device */
+#define		AT91_CIDR_EPROC		(7    << 5)		/* Embedded Processor */
+#define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
+#define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
+#define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
+#define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
+#define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
+#define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
 
 
 /*
@@ -241,7 +250,7 @@
 #define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
 #define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
 #define		AT91_RTC_HOUR 		(0x3f << 16)		/* Current Hour */
-#define		At91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
+#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
 
 #define	AT91_RTC_CALR		(AT91_RTC + 0x0c)	/* Calendar Register */
 #define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h b/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h
new file mode 100644
index 00000000000..f4da752bb0c
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200_tc.h
@@ -0,0 +1,146 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91rm9200_tc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Timer/Counter Unit (TC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_TC_H
+#define AT91RM9200_TC_H
+
+#define AT91_TC_BCR		0xc0		/* TC Block Control Register */
+#define		AT91_TC_SYNC		(1 << 0)	/* Synchro Command */
+
+#define AT91_TC_BMR		0xc4		/* TC Block Mode Register */
+#define		AT91_TC_TC0XC0S		(3 << 0)	/* External Clock Signal 0 Selection */
+#define			AT91_TC_TC0XC0S_TCLK0		(0 << 0)
+#define			AT91_TC_TC0XC0S_NONE		(1 << 0)
+#define			AT91_TC_TC0XC0S_TIOA1		(2 << 0)
+#define			AT91_TC_TC0XC0S_TIOA2		(3 << 0)
+#define		AT91_TC_TC1XC1S		(3 << 2)	/* External Clock Signal 1 Selection */
+#define			AT91_TC_TC1XC1S_TCLK1		(0 << 2)
+#define			AT91_TC_TC1XC1S_NONE		(1 << 2)
+#define			AT91_TC_TC1XC1S_TIOA0		(2 << 2)
+#define			AT91_TC_TC1XC1S_TIOA2		(3 << 2)
+#define		AT91_TC_TC2XC2S		(3 << 4)	/* External Clock Signal 2 Selection */
+#define			AT91_TC_TC2XC2S_TCLK2		(0 << 4)
+#define			AT91_TC_TC2XC2S_NONE		(1 << 4)
+#define			AT91_TC_TC2XC2S_TIOA0		(2 << 4)
+#define			AT91_TC_TC2XC2S_TIOA1		(3 << 4)
+
+
+#define AT91_TC_CCR		0x00		/* Channel Control Register */
+#define		AT91_TC_CLKEN		(1 << 0)	/* Counter Clock Enable Command */
+#define		AT91_TC_CLKDIS		(1 << 1)	/* Counter CLock Disable Command */
+#define		AT91_TC_SWTRG		(1 << 2)	/* Software Trigger Command */
+
+#define AT91_TC_CMR		0x04		/* Channel Mode Register */
+#define		AT91_TC_TCCLKS		(7 << 0)	/* Capture/Waveform Mode: Clock Selection */
+#define			AT91_TC_TIMER_CLOCK1		(0 << 0)
+#define			AT91_TC_TIMER_CLOCK2		(1 << 0)
+#define			AT91_TC_TIMER_CLOCK3		(2 << 0)
+#define			AT91_TC_TIMER_CLOCK4		(3 << 0)
+#define			AT91_TC_TIMER_CLOCK5		(4 << 0)
+#define			AT91_TC_XC0			(5 << 0)
+#define			AT91_TC_XC1			(6 << 0)
+#define			AT91_TC_XC2			(7 << 0)
+#define		AT91_TC_CLKI		(1 << 3)	/* Capture/Waveform Mode: Clock Invert */
+#define		AT91_TC_BURST		(3 << 4)	/* Capture/Waveform Mode: Burst Signal Selection */
+#define		AT91_TC_LDBSTOP		(1 << 6)	/* Capture Mode: Counter Clock Stopped with TB Loading */
+#define		AT91_TC_LDBDIS		(1 << 7)	/* Capture Mode: Counter Clock Disable with RB Loading */
+#define		AT91_TC_ETRGEDG		(3 << 8)	/* Capture Mode: External Trigger Edge Selection */
+#define		AT91_TC_ABETRG		(1 << 10)	/* Capture Mode: TIOA or TIOB External Trigger Selection */
+#define		AT91_TC_CPCTRG		(1 << 14)	/* Capture Mode: RC Compare Trigger Enable */
+#define		AT91_TC_WAVE		(1 << 15)	/* Capture/Waveform mode */
+#define		AT91_TC_LDRA		(3 << 16)	/* Capture Mode: RA Loading Selection */
+#define		AT91_TC_LDRB		(3 << 18)	/* Capture Mode: RB Loading Selection */
+
+#define		AT91_TC_CPCSTOP		(1 <<  6)	/* Waveform Mode: Counter Clock Stopped with RC Compare */
+#define		AT91_TC_CPCDIS		(1 <<  7)	/* Waveform Mode: Counter Clock Disable with RC Compare */
+#define		AT91_TC_EEVTEDG		(3 <<  8)	/* Waveform Mode: External Event Edge Selection */
+#define			AT91_TC_EEVTEDG_NONE		(0 << 8)
+#define			AT91_TC_EEVTEDG_RISING		(1 << 8)
+#define			AT91_TC_EEVTEDG_FALLING		(2 << 8)
+#define			AT91_TC_EEVTEDG_BOTH		(3 << 8)
+#define		AT91_TC_EEVT		(3 << 10)	/* Waveform Mode: External Event Selection */
+#define			AT91_TC_EEVT_TIOB		(0 << 10)
+#define			AT91_TC_EEVT_XC0		(1 << 10)
+#define			AT91_TC_EEVT_XC1		(2 << 10)
+#define			AT91_TC_EEVT_XC2		(3 << 10)
+#define		AT91_TC_ENETRG		(1 << 12)	/* Waveform Mode: External Event Trigger Enable */
+#define		AT91_TC_WAVESEL		(3 << 13)	/* Waveform Mode: Waveform Selection */
+#define			AT91_TC_WAVESEL_UP		(0 << 13)
+#define			AT91_TC_WAVESEL_UP_AUTO		(2 << 13)
+#define			AT91_TC_WAVESEL_UPDOWN		(1 << 13)
+#define			AT91_TC_WAVESEL_UPDOWN_AUTO	(3 << 13)
+#define		AT91_TC_ACPA		(3 << 16)	/* Waveform Mode: RA Compare Effect on TIOA */
+#define			AT91_TC_ACPA_NONE		(0 << 16)
+#define			AT91_TC_ACPA_SET		(1 << 16)
+#define			AT91_TC_ACPA_CLEAR		(2 << 16)
+#define			AT91_TC_ACPA_TOGGLE		(3 << 16)
+#define		AT91_TC_ACPC		(3 << 18)	/* Waveform Mode: RC Compre Effect on TIOA */
+#define			AT91_TC_ACPC_NONE		(0 << 18)
+#define			AT91_TC_ACPC_SET		(1 << 18)
+#define			AT91_TC_ACPC_CLEAR		(2 << 18)
+#define			AT91_TC_ACPC_TOGGLE		(3 << 18)
+#define		AT91_TC_AEEVT		(3 << 20)	/* Waveform Mode: External Event Effect on TIOA */
+#define			AT91_TC_AEEVT_NONE		(0 << 20)
+#define			AT91_TC_AEEVT_SET		(1 << 20)
+#define			AT91_TC_AEEVT_CLEAR		(2 << 20)
+#define			AT91_TC_AEEVT_TOGGLE		(3 << 20)
+#define		AT91_TC_ASWTRG		(3 << 22)	/* Waveform Mode: Software Trigger Effect on TIOA */
+#define			AT91_TC_ASWTRG_NONE		(0 << 22)
+#define			AT91_TC_ASWTRG_SET		(1 << 22)
+#define			AT91_TC_ASWTRG_CLEAR		(2 << 22)
+#define			AT91_TC_ASWTRG_TOGGLE		(3 << 22)
+#define		AT91_TC_BCPB		(3 << 24)	/* Waveform Mode: RB Compare Effect on TIOB */
+#define			AT91_TC_BCPB_NONE		(0 << 24)
+#define			AT91_TC_BCPB_SET		(1 << 24)
+#define			AT91_TC_BCPB_CLEAR		(2 << 24)
+#define			AT91_TC_BCPB_TOGGLE		(3 << 24)
+#define		AT91_TC_BCPC		(3 << 26)	/* Waveform Mode: RC Compare Effect on TIOB */
+#define			AT91_TC_BCPC_NONE		(0 << 26)
+#define			AT91_TC_BCPC_SET		(1 << 26)
+#define			AT91_TC_BCPC_CLEAR		(2 << 26)
+#define			AT91_TC_BCPC_TOGGLE		(3 << 26)
+#define		AT91_TC_BEEVT		(3 << 28)	/* Waveform Mode: External Event Effect on TIOB */
+#define			AT91_TC_BEEVT_NONE		(0 << 28)
+#define			AT91_TC_BEEVT_SET		(1 << 28)
+#define			AT91_TC_BEEVT_CLEAR		(2 << 28)
+#define			AT91_TC_BEEVT_TOGGLE		(3 << 28)
+#define		AT91_TC_BSWTRG		(3 << 30)	/* Waveform Mode: Software Trigger Effect on TIOB */
+#define			AT91_TC_BSWTRG_NONE		(0 << 30)
+#define			AT91_TC_BSWTRG_SET		(1 << 30)
+#define			AT91_TC_BSWTRG_CLEAR		(2 << 30)
+#define			AT91_TC_BSWTRG_TOGGLE		(3 << 30)
+
+#define AT91_TC_CV		0x10		/* Counter Value */
+#define AT91_TC_RA		0x14		/* Register A */
+#define AT91_TC_RB		0x18		/* Register B */
+#define AT91_TC_RC		0x1c		/* Register C */
+
+#define AT91_TC_SR		0x20		/* Status Register */
+#define		AT91_TC_COVFS		(1 <<  0)	/* Counter Overflow Status */
+#define		AT91_TC_LOVRS		(1 <<  1)	/* Load Overrun Status */
+#define		AT91_TC_CPAS		(1 <<  2)	/* RA Compare Status */
+#define		AT91_TC_CPBS		(1 <<  3)	/* RB Compare Status */
+#define		AT91_TC_CPCS		(1 <<  4)	/* RC Compare Status */
+#define		AT91_TC_LDRAS		(1 <<  5)	/* RA Loading Status */
+#define		AT91_TC_LDRBS		(1 <<  6)	/* RB Loading Status */
+#define		AT91_TC_ETRGS		(1 <<  7)	/* External Trigger Status */
+#define		AT91_TC_CLKSTA		(1 << 16)	/* Clock Enabling Status */
+#define		AT91_TC_MTIOA		(1 << 17)	/* TIOA Mirror */
+#define		AT91_TC_MTIOB		(1 << 18)	/* TIOB Mirror */
+
+#define AT91_TC_IER		0x24		/* Interrupt Enable Register */
+#define AT91_TC_IDR		0x28		/* Interrupt Disable Register */
+#define AT91_TC_IMR		0x2c		/* Interrupt Mask Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h b/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h
new file mode 100644
index 00000000000..951e3f61cef
--- /dev/null
+++ b/include/asm-arm/arch-at91rm9200/at91rm9200_udp.h
@@ -0,0 +1,77 @@
+/*
+ * include/asm-arm/arch-at91rm9200/at91rm9200_udp.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * USB Device Port (UDP) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_UDP_H
+#define AT91RM9200_UDP_H
+
+#define AT91_UDP_FRM_NUM	0x00		/* Frame Number Register */
+#define		AT91_UDP_NUM		(0x7ff <<  0)		/* Frame Number */
+#define		AT91_UDP_FRM_ERR	(1     << 16)		/* Frame Error */
+#define		AT91_UDP_FRM_OK		(1     << 17)		/* Frame OK */
+
+#define AT91_UDP_GLB_STAT	0x04		/* Global State Register */
+#define		AT91_UDP_FADDEN		(1 <<  0)		/* Function Address Enable */
+#define		AT91_UDP_CONFG		(1 <<  1)		/* Configured */
+#define		AT91_UDP_ESR		(1 <<  2)		/* Enable Send Resume */
+#define		AT91_UDP_RSMINPR	(1 <<  3)		/* Resume has been sent */
+#define		AT91_UDP_RMWUPE		(1 <<  4)		/* Remote Wake Up Enable */
+
+#define AT91_UDP_FADDR		0x08		/* Function Address Register */
+#define		AT91_UDP_FADD		(0x7f << 0)		/* Function Address Value */
+#define		AT91_UDP_FEN		(1    << 8)		/* Function Enable */
+
+#define AT91_UDP_IER		0x10		/* Interrupt Enable Register */
+#define AT91_UDP_IDR		0x14		/* Interrupt Disable Register */
+#define AT91_UDP_IMR		0x18		/* Interrupt Mask Register */
+
+#define AT91_UDP_ISR		0x1c		/* Interrupt Status Register */
+#define		AT91_UDP_EP(n)		(1 << (n))		/* Endpoint Interrupt Status */
+#define		AT91_UDP_RXSUSP		(1 <<  8)		/* USB Suspend Interrupt Status */
+#define		AT91_UDP_RXRSM		(1 <<  9)		/* USB Resume Interrupt Status */
+#define		AT91_UDP_EXTRSM		(1 << 10)		/* External Resume Interrupt Status */
+#define		AT91_UDP_SOFINT		(1 << 11)		/* Start of Frame Interrupt Status */
+#define		AT91_UDP_ENDBUSRES	(1 << 12)		/* End of Bus Reset Interrpt Status */
+#define		AT91_UDP_WAKEUP		(1 << 13)		/* USB Wakeup Interrupt Status */
+
+#define AT91_UDP_ICR		0x20		/* Interrupt Clear Register */
+#define AT91_UDP_RST_EP		0x28		/* Reset Endpoint Register */
+
+#define AT91_UDP_CSR(n)		(0x30 + ((n) * 4))	/* Endpoint Control/Status Registers 0-7 */
+#define		AT91_UDP_TXCOMP		(1 <<  0)		/* Generates IN packet with data previously written in DPR */
+#define		AT91_UDP_RX_DATA_BK0	(1 <<  1)		/* Receive Data Bank 0 */
+#define		AT91_UDP_RXSETUP	(1 <<  2)		/* Send STALL to the host */
+#define		AT91_UDP_STALLSENT	(1 <<  3)		/* Stall Sent / Isochronous error (Isochronous endpoints) */
+#define		AT91_UDP_TXPKTRDY	(1 <<  4)		/* Transmit Packet Ready */
+#define		AT91_UDP_FORCESTALL	(1 <<  5)		/* Force Stall */
+#define		AT91_UDP_RX_DATA_BK1	(1 <<  6)		/* Receive Data Bank 1 */
+#define		AT91_UDP_DIR		(1 <<  7)		/* Transfer Direction */
+#define		AT91_UDP_EPTYPE		(7 <<  8)		/* Endpoint Type */
+#define			AT91_UDP_EPTYPE_CTRL		(0 <<  8)
+#define			AT91_UDP_EPTYPE_ISO_OUT		(1 <<  8)
+#define			AT91_UDP_EPTYPE_BULK_OUT	(2 <<  8)
+#define			AT91_UDP_EPTYPE_INT_OUT		(3 <<  8)
+#define			AT91_UDP_EPTYPE_ISO_IN		(5 <<  8)
+#define			AT91_UDP_EPTYPE_BULK_IN		(6 <<  8)
+#define			AT91_UDP_EPTYPE_INT_IN		(7 <<  8)
+#define		AT91_UDP_DTGLE		(1 << 11)		/* Data Toggle */
+#define		AT91_UDP_EPEDS		(1 << 15)		/* Endpoint Enable/Disable */
+#define		AT91_UDP_RXBYTECNT	(0x7ff << 16)		/* Number of bytes in FIFO */
+
+#define AT91_UDP_FDR(n)		(0x50 + ((n) * 4))	/* Endpoint FIFO Data Registers 0-7 */
+
+#define AT91_UDP_TXVC		0x74		/* Transceiver Control Register */
+#define		AT91_UDP_TXVC_TXVDIS	(1 << 8)		/* Transceiver Disable */
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h
index 4fdef13d01d..1fdd70b2380 100644
--- a/include/asm-arm/arch-at91rm9200/board.h
+++ b/include/asm-arm/arch-at91rm9200/board.h
@@ -31,14 +31,9 @@
 #ifndef __ASM_ARCH_BOARD_H
 #define __ASM_ARCH_BOARD_H
 
- /* Clocks */
-extern unsigned long at91_master_clock;
-
- /* Serial Port */
-extern int at91_serial_map[AT91_NR_UART];
-extern int at91_console_port;
-
 #include <linux/mtd/partitions.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
 
  /* USB Device */
 struct at91_udc_data {
@@ -91,10 +86,25 @@ struct at91_nand_data {
 extern void __init at91_add_device_nand(struct at91_nand_data *data);
 
  /* I2C*/
-void __init at91_add_device_i2c(void);
+extern void __init at91_add_device_i2c(void);
+
+ /* SPI */
+extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
 
- /* RTC */
-void __init at91_add_device_rtc(void);
+ /* Serial */
+struct at91_uart_config {
+	unsigned short	console_tty;	/* tty number of serial console */
+	unsigned short	nr_tty;		/* number of serial tty's */
+	short		tty_map[];	/* map UART to tty number */
+};
+extern struct platform_device *at91_default_console_device;
+extern void __init at91_init_serial(struct at91_uart_config *config);
+
+struct at91_uart_data {
+	short		use_dma_tx;	/* use transmit DMA? */
+	short		use_dma_rx;	/* use receive DMA? */
+};
+extern void __init at91_add_device_serial(void);
 
  /* LEDs */
 extern u8 at91_leds_cpu;
diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91rm9200/gpio.h
index 6176ab2dc41..dbde1baaf25 100644
--- a/include/asm-arm/arch-at91rm9200/gpio.h
+++ b/include/asm-arm/arch-at91rm9200/gpio.h
@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_AT91RM9200_GPIO_H
 #define __ASM_ARCH_AT91RM9200_GPIO_H
 
+#include <asm/irq.h>
+
 #define PIN_BASE		NR_AIC_IRQS
 
 #define PQFP_GPIO_BANKS		3	/* PQFP package has 3 banks */
@@ -188,6 +190,9 @@ extern int at91_set_multi_drive(unsigned pin, int is_on);
 /* callable at any time */
 extern int at91_set_gpio_value(unsigned pin, int value);
 extern int at91_get_gpio_value(unsigned pin);
+
+extern void at91_gpio_suspend(void);
+extern void at91_gpio_resume(void);
 #endif
 
 #endif
diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h
index 59e6f44d3a0..235d39d9110 100644
--- a/include/asm-arm/arch-at91rm9200/hardware.h
+++ b/include/asm-arm/arch-at91rm9200/hardware.h
@@ -50,9 +50,12 @@
 #define AT91_VA_BASE_TCB0	AT91_IO_P2V(AT91_BASE_TCB0)
 
 /* Internal SRAM */
-#define AT91_BASE_SRAM		0x00200000	/* Internal SRAM base address */
+#define AT91_SRAM_BASE		0x00200000	/* Internal SRAM base address */
 #define AT91_SRAM_SIZE		0x00004000	/* Internal SRAM SIZE (16Kb) */
 
+ /* Internal SRAM is mapped below the IO devices */
+#define AT91_SRAM_VIRT_BASE	(AT91_IO_VIRT_BASE - AT91_SRAM_SIZE)
+
 /* Serial ports */
 #define AT91_NR_UART		5		/* 4 USART3's and one DBGU port */
 
@@ -81,14 +84,14 @@ static inline unsigned int at91_sys_read(unsigned int reg_offset)
 {
 	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
 
-	return readl(addr + reg_offset);
+	return __raw_readl(addr + reg_offset);
 }
 
 static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
 {
 	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
 
-	writel(value, addr + reg_offset);
+	__raw_writel(value, addr + reg_offset);
 }
 #endif
 
diff --git a/include/asm-arm/arch-at91rm9200/io.h b/include/asm-arm/arch-at91rm9200/io.h
index 23e670d85c9..88fd1bebcef 100644
--- a/include/asm-arm/arch-at91rm9200/io.h
+++ b/include/asm-arm/arch-at91rm9200/io.h
@@ -21,7 +21,6 @@
 #ifndef __ASM_ARCH_IO_H
 #define __ASM_ARCH_IO_H
 
-#include <asm/arch/at91rm9200.h>
 #include <asm/io.h>
 
 #define IO_SPACE_LIMIT		0xFFFFFFFF
diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h
index 27b0497f1b3..2dc93b174a8 100644
--- a/include/asm-arm/arch-at91rm9200/irqs.h
+++ b/include/asm-arm/arch-at91rm9200/irqs.h
@@ -37,8 +37,6 @@
  * symbols in gpio.h for ones handled indirectly as GPIOs.
  * We make provision for 4 banks of GPIO.
  */
-#include <asm/arch/gpio.h>
-
 #define	NR_IRQS		(NR_AIC_IRQS + (4 * 32))
 
 
diff --git a/include/asm-arm/arch-at91rm9200/memory.h b/include/asm-arm/arch-at91rm9200/memory.h
index 462f1f0ad67..f985069e6d0 100644
--- a/include/asm-arm/arch-at91rm9200/memory.h
+++ b/include/asm-arm/arch-at91rm9200/memory.h
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 #define PHYS_OFFSET	(AT91_SDRAM_BASE)
 
@@ -33,9 +33,7 @@
  * bus_to_virt: Used to convert an address for DMA operations
  *              to an address that the kernel can use.
  */
-#define __virt_to_bus__is_a_macro
 #define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x) __phys_to_virt(x)
 
 #endif
diff --git a/include/asm-arm/arch-at91rm9200/pio.h b/include/asm-arm/arch-at91rm9200/pio.h
deleted file mode 100644
index a89501b4a70..00000000000
--- a/include/asm-arm/arch-at91rm9200/pio.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/pio.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_PIO_H
-#define __ASM_ARCH_PIO_H
-
-#include <asm/arch/hardware.h>
-
-static inline void AT91_CfgPIO_USART0(void) {
-	at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA17_TXD0 | AT91_PA18_RXD0 | AT91_PA20_CTS0);
-
-	/*
-	 * Errata #39 - RTS0 is not internally connected to PA21.  We need to drive
-	 *  the pin manually.  Default is off (RTS is active low).
-	 */
-	at91_sys_write(AT91_PIOA + PIO_PER, AT91_PA21_RTS0);
-	at91_sys_write(AT91_PIOA + PIO_OER, AT91_PA21_RTS0);
-	at91_sys_write(AT91_PIOA + PIO_SODR, AT91_PA21_RTS0);
-}
-
-static inline void AT91_CfgPIO_USART1(void) {
-	at91_sys_write(AT91_PIOB + PIO_PDR, AT91_PB18_RI1 | AT91_PB19_DTR1
-			| AT91_PB20_TXD1 | AT91_PB21_RXD1 | AT91_PB23_DCD1
-			| AT91_PB24_CTS1 | AT91_PB25_DSR1 | AT91_PB26_RTS1);
-}
-
-static inline void AT91_CfgPIO_USART2(void) {
-	at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA22_RXD2 | AT91_PA23_TXD2);
-}
-
-static inline void AT91_CfgPIO_USART3(void) {
-	at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA5_TXD3 | AT91_PA6_RXD3);
-	at91_sys_write(AT91_PIOA + PIO_BSR, AT91_PA5_TXD3 | AT91_PA6_RXD3);
-}
-
-static inline void AT91_CfgPIO_DBGU(void) {
-	at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA31_DTXD | AT91_PA30_DRXD);
-}
-
-/*
- * Enable the Two-Wire interface.
- */
-static inline void AT91_CfgPIO_TWI(void) {
-	at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA25_TWD | AT91_PA26_TWCK);
-	at91_sys_write(AT91_PIOA + PIO_ASR, AT91_PA25_TWD | AT91_PA26_TWCK);
-	at91_sys_write(AT91_PIOA + PIO_MDER, AT91_PA25_TWD | AT91_PA26_TWCK);		/* open drain */
-}
-
-/*
- * Enable the Serial Peripheral Interface.
- */
-static inline void AT91_CfgPIO_SPI(void) {
-	at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA0_MISO | AT91_PA1_MOSI | AT91_PA2_SPCK);
-}
-
-static inline void AT91_CfgPIO_SPI_CS0(void) {
-	at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA3_NPCS0);
-}
-
-static inline void AT91_CfgPIO_SPI_CS1(void) {
-	at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA4_NPCS1);
-}
-
-static inline void AT91_CfgPIO_SPI_CS2(void) {
-	at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA5_NPCS2);
-}
-
-static inline void AT91_CfgPIO_SPI_CS3(void) {
-	at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA6_NPCS3);
-}
-
-/*
- * Select the DataFlash card.
- */
-static inline void AT91_CfgPIO_DataFlashCard(void) {
-	at91_sys_write(AT91_PIOB + PIO_PER, AT91_PIO_P(7));
-	at91_sys_write(AT91_PIOB + PIO_OER, AT91_PIO_P(7));
-	at91_sys_write(AT91_PIOB + PIO_CODR, AT91_PIO_P(7));
-}
-
-/*
- * Enable NAND Flash (SmartMedia) interface.
- */
-static inline void AT91_CfgPIO_SmartMedia(void) {
-	/* enable PC0=SMCE, PC1=SMOE, PC3=SMWE, A21=CLE, A22=ALE */
-	at91_sys_write(AT91_PIOC + PIO_ASR, AT91_PC0_BFCK | AT91_PC1_BFRDY_SMOE | AT91_PC3_BFBAA_SMWE);
-	at91_sys_write(AT91_PIOC + PIO_PDR, AT91_PC0_BFCK | AT91_PC1_BFRDY_SMOE | AT91_PC3_BFBAA_SMWE);
-
-	/* Configure PC2 as input (signal READY of the SmartMedia) */
-	at91_sys_write(AT91_PIOC + PIO_PER, AT91_PC2_BFAVD);	/* enable direct output enable */
-	at91_sys_write(AT91_PIOC + PIO_ODR, AT91_PC2_BFAVD);	/* disable output */
-
-	/* Configure PB1 as input (signal Card Detect of the SmartMedia) */
-	at91_sys_write(AT91_PIOB + PIO_PER, AT91_PIO_P(1));	/* enable direct output enable */
-	at91_sys_write(AT91_PIOB + PIO_ODR, AT91_PIO_P(1));	/* disable output */
-}
-
-static inline int AT91_PIO_SmartMedia_RDY(void) {
-	return (at91_sys_read(AT91_PIOC + PIO_PDSR) & AT91_PIO_P(2)) ? 1 : 0;
-}
-
-static inline int AT91_PIO_SmartMedia_CardDetect(void) {
-	return (at91_sys_read(AT91_PIOB + PIO_PDSR) & AT91_PIO_P(1)) ? 1 : 0;
-}
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/system.h b/include/asm-arm/arch-at91rm9200/system.h
index 29c42655f05..8a2ff472e4c 100644
--- a/include/asm-arm/arch-at91rm9200/system.h
+++ b/include/asm-arm/arch-at91rm9200/system.h
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 static inline void arch_idle(void)
 {
@@ -48,4 +48,12 @@ static inline void arch_reset(char mode)
 	at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
 }
 
+#define ARCH_ID_AT91RM9200	0x09200080
+#define ARCH_ID_AT91SAM9261	0x019000a0
+
+static inline unsigned long arch_identify(void)
+{
+	return at91_sys_read(AT91_DBGU_CIDR) & (AT91_CIDR_EPROC | AT91_CIDR_ARCH);
+}
+
 #endif
diff --git a/include/asm-arm/arch-at91rm9200/timex.h b/include/asm-arm/arch-at91rm9200/timex.h
index 3f112dd1258..88687cefe6e 100644
--- a/include/asm-arm/arch-at91rm9200/timex.h
+++ b/include/asm-arm/arch-at91rm9200/timex.h
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_TIMEX_H
 #define __ASM_ARCH_TIMEX_H
 
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 #define CLOCK_TICK_RATE		(AT91_SLOW_CLOCK)
 
diff --git a/include/asm-arm/arch-at91rm9200/uncompress.h b/include/asm-arm/arch-at91rm9200/uncompress.h
index 7b38497c24b..ec7811ab0a5 100644
--- a/include/asm-arm/arch-at91rm9200/uncompress.h
+++ b/include/asm-arm/arch-at91rm9200/uncompress.h
@@ -21,7 +21,7 @@
 #ifndef __ASM_ARCH_UNCOMPRESS_H
 #define __ASM_ARCH_UNCOMPRESS_H
 
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 /*
  * The following code assumes the serial port has already been
diff --git a/include/asm-arm/arch-at91rm9200/vmalloc.h b/include/asm-arm/arch-at91rm9200/vmalloc.h
index 34d9718feb9..4c367eb57f4 100644
--- a/include/asm-arm/arch-at91rm9200/vmalloc.h
+++ b/include/asm-arm/arch-at91rm9200/vmalloc.h
@@ -21,6 +21,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END		(AT91_IO_VIRT_BASE & PGDIR_MASK)
+#define VMALLOC_END		(AT91_SRAM_VIRT_BASE & PGDIR_MASK)
 
 #endif