Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 64 insertions, 0 deletions

diff --git a/include/asm-arm/arch-epxa10db/hardware.h b/include/asm-arm/arch-epxa10db/hardware.h
new file mode 100644
index 00000000000..b992c2924a7
--- /dev/null
+++ b/include/asm-arm/arch-epxa10db/hardware.h
@@ -0,0 +1,64 @@
+/*
+ *  linux/include/asm-arm/arch-epxa10/hardware.h
+ *
+ *  This file contains the hardware definitions of the Integrator.
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *  Copyright (C) 2001 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/arch/platform.h>
+
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE			0xf0000000                 // VA of IO 
+#define IO_SIZE			0x10000000                 // How much?
+#define IO_START		EXC_REGISTERS_BASE              // PA of IO
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) ((x) | 0xf0000000) 
+
+#define FLASH_VBASE             0xFE000000
+#define FLASH_SIZE              0x01000000
+#define FLASH_START             EXC_EBI_BLOCK0_BASE
+#define FLASH_VADDR(x) ((x)|0xFE000000)
+/*
+ * Similar to above, but for PCI addresses (memory, IO, Config and the
+ * V3 chip itself).  WARNING: this has to mirror definitions in platform.h
+ */
+#if 0
+#define PCI_MEMORY_VADDR        0xe8000000
+#define PCI_CONFIG_VADDR        0xec000000
+#define PCI_V3_VADDR            0xed000000
+#define PCI_IO_VADDR            0xee000000
+
+#define PCIO_BASE		PCI_IO_VADDR
+#define PCIMEM_BASE		PCI_MEMORY_VADDR
+
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x6000
+#define PCIBIOS_MIN_MEM 	0x00100000
+#endif
+
+
+#endif
+