Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 377 insertions, 0 deletions

diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
new file mode 100644
index 00000000000..6c56708d0ff
--- /dev/null
+++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
@@ -0,0 +1,377 @@
+/*
+ * include/asm-arm/arch-ixp2000/ixp2000-regs.h
+ *
+ * Chipset register definitions for IXP2400/2800 based systems.
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef _IXP2000_REGS_H_
+#define _IXP2000_REGS_H_
+
+/* 
+ * Static I/O regions.
+ *
+ * Most of the registers are clumped in 4K regions spread throughout
+ * the 0xc0000000 -> 0xc0100000 address range, but we just map in
+ * the whole range using a single 1 MB section instead of small
+ * 4K pages.  This has two advantages for us:
+ *
+ * 1) We use only one TLB entry for large number of on-chip I/O devices.
+ *
+ * 2) We can easily set the Section attributes to XCB=101 on the IXP2400
+ *    as required per erratum #66.  We accomplish this by using a
+ *    new MT_IXP2000_DEVICE memory type with the bits set as required.
+ *
+ * CAP stands for CSR Access Proxy.
+ *
+ * If you change the virtual address of this mapping, please propagate
+ * the change to arch/arm/kernel/debug.S, which hardcodes the virtual
+ * address of the UART located in this region.
+ */
+
+#define	IXP2000_CAP_PHYS_BASE		0xc0000000
+#define	IXP2000_CAP_VIRT_BASE		0xfef00000
+#define	IXP2000_CAP_SIZE		0x00100000
+
+/*
+ * Addresses for specific on-chip peripherals
+ */
+#define	IXP2000_SLOWPORT_CSR_VIRT_BASE	0xfef80000
+#define	IXP2000_GLOBAL_REG_VIRT_BASE	0xfef04000
+#define	IXP2000_UART_PHYS_BASE		0xc0030000
+#define	IXP2000_UART_VIRT_BASE		0xfef30000
+#define	IXP2000_TIMER_VIRT_BASE		0xfef20000
+#define	IXP2000_GPIO_VIRT_BASE		0Xfef10000
+
+/*
+ * Devices outside of the 0xc0000000 -> 0xc0100000 range.  The virtual
+ * addresses of the INTCTL and PCI_CSR mappings are hardcoded in
+ * entry-macro.S, so if you ever change these please propagate
+ * the change.
+ */
+#define IXP2000_INTCTL_PHYS_BASE	0xd6000000
+#define	IXP2000_INTCTL_VIRT_BASE	0xfee00000
+#define	IXP2000_INTCTL_SIZE		0x00100000
+
+#define IXP2000_PCI_CREG_PHYS_BASE	0xde000000
+#define	IXP2000_PCI_CREG_VIRT_BASE	0xfed00000
+#define	IXP2000_PCI_CREG_SIZE		0x00100000
+
+#define IXP2000_PCI_CSR_PHYS_BASE	0xdf000000
+#define	IXP2000_PCI_CSR_VIRT_BASE	0xfec00000
+#define	IXP2000_PCI_CSR_SIZE		0x00100000
+
+#define IXP2000_PCI_IO_PHYS_BASE	0xd8000000
+#define	IXP2000_PCI_IO_VIRT_BASE	0xfd000000
+#define IXP2000_PCI_IO_SIZE     	0x01000000
+
+#define IXP2000_PCI_CFG0_PHYS_BASE	0xda000000
+#define IXP2000_PCI_CFG0_VIRT_BASE	0xfc000000
+#define IXP2000_PCI_CFG0_SIZE   	0x01000000
+
+#define IXP2000_PCI_CFG1_PHYS_BASE	0xdb000000
+#define IXP2000_PCI_CFG1_VIRT_BASE	0xfb000000
+#define IXP2000_PCI_CFG1_SIZE		0x01000000
+
+/* 
+ * Timers
+ */
+#define	IXP2000_TIMER_REG(x)		((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x)))
+/* Timer control */
+#define	IXP2000_T1_CTL			IXP2000_TIMER_REG(0x00)
+#define	IXP2000_T2_CTL			IXP2000_TIMER_REG(0x04)
+#define	IXP2000_T3_CTL			IXP2000_TIMER_REG(0x08)
+#define	IXP2000_T4_CTL			IXP2000_TIMER_REG(0x0c)
+/* Store initial value */
+#define	IXP2000_T1_CLD			IXP2000_TIMER_REG(0x10)
+#define	IXP2000_T2_CLD			IXP2000_TIMER_REG(0x14)
+#define	IXP2000_T3_CLD			IXP2000_TIMER_REG(0x18)
+#define	IXP2000_T4_CLD			IXP2000_TIMER_REG(0x1c)
+/* Read current value */
+#define	IXP2000_T1_CSR			IXP2000_TIMER_REG(0x20)
+#define	IXP2000_T2_CSR			IXP2000_TIMER_REG(0x24)
+#define	IXP2000_T3_CSR			IXP2000_TIMER_REG(0x28)
+#define	IXP2000_T4_CSR			IXP2000_TIMER_REG(0x2c)
+/* Clear associated timer interrupt */
+#define	IXP2000_T1_CLR			IXP2000_TIMER_REG(0x30)
+#define	IXP2000_T2_CLR			IXP2000_TIMER_REG(0x34)
+#define	IXP2000_T3_CLR			IXP2000_TIMER_REG(0x38)
+#define	IXP2000_T4_CLR			IXP2000_TIMER_REG(0x3c)
+/* Timer watchdog enable for T4 */
+#define	IXP2000_TWDE			IXP2000_TIMER_REG(0x40)
+
+#define	WDT_ENABLE			0x00000001
+#define	TIMER_DIVIDER_256		0x00000008
+#define	TIMER_ENABLE			0x00000080
+#define	IRQ_MASK_TIMER1         	(1 << 4)
+
+/*
+ * Interrupt controller registers
+ */
+#define IXP2000_INTCTL_REG(x)		(volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x))
+#define IXP2000_IRQ_STATUS		IXP2000_INTCTL_REG(0x08)
+#define IXP2000_IRQ_ENABLE		IXP2000_INTCTL_REG(0x10)
+#define IXP2000_IRQ_ENABLE_SET		IXP2000_INTCTL_REG(0x10)
+#define IXP2000_IRQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x18)
+#define IXP2000_FIQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x14)
+#define IXP2000_IRQ_ERR_STATUS		IXP2000_INTCTL_REG(0x24)
+#define IXP2000_IRQ_ERR_ENABLE_SET	IXP2000_INTCTL_REG(0x2c)
+#define IXP2000_FIQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x30)
+#define IXP2000_IRQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x34)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_0	IXP2000_INTCTL_REG(0x60)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_1	IXP2000_INTCTL_REG(0x64)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_2	IXP2000_INTCTL_REG(0x68)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_3	IXP2000_INTCTL_REG(0x6c)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_0	IXP2000_INTCTL_REG(0x80)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_1	IXP2000_INTCTL_REG(0x84)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_2	IXP2000_INTCTL_REG(0x88)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_3	IXP2000_INTCTL_REG(0x8c)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_0	IXP2000_INTCTL_REG(0x160)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_1	IXP2000_INTCTL_REG(0x164)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_2	IXP2000_INTCTL_REG(0x168)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_3	IXP2000_INTCTL_REG(0x16c)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_0	IXP2000_INTCTL_REG(0x180)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_1	IXP2000_INTCTL_REG(0x184)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_2	IXP2000_INTCTL_REG(0x188)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_3	IXP2000_INTCTL_REG(0x18c)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0	IXP2000_INTCTL_REG(0x1e0)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1	IXP2000_INTCTL_REG(0x1e4)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2	IXP2000_INTCTL_REG(0x1e8)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3	IXP2000_INTCTL_REG(0x1ec)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0	IXP2000_INTCTL_REG(0x200)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1	IXP2000_INTCTL_REG(0x204)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2	IXP2000_INTCTL_REG(0x208)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3	IXP2000_INTCTL_REG(0x20c)
+
+/*
+ * Mask of valid IRQs in the 32-bit IRQ register. We use
+ * this to mark certain IRQs as being invalid.
+ */
+#define	IXP2000_VALID_IRQ_MASK	0x0f0fffff
+
+/*
+ * PCI config register access from core
+ */
+#define IXP2000_PCI_CREG(x)		(volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x))
+#define IXP2000_PCI_CMDSTAT 		IXP2000_PCI_CREG(0x04)
+#define IXP2000_PCI_CSR_BAR		IXP2000_PCI_CREG(0x10)
+#define IXP2000_PCI_SRAM_BAR		IXP2000_PCI_CREG(0x14)
+#define IXP2000_PCI_SDRAM_BAR		IXP2000_PCI_CREG(0x18)
+
+/*
+ * PCI CSRs
+ */
+#define IXP2000_PCI_CSR(x)		(volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x))
+
+/*
+ * PCI outbound interrupts
+ */
+#define IXP2000_PCI_OUT_INT_STATUS	IXP2000_PCI_CSR(0x30)
+#define IXP2000_PCI_OUT_INT_MASK	IXP2000_PCI_CSR(0x34)
+/*
+ * PCI communications
+ */
+#define IXP2000_PCI_MAILBOX0		IXP2000_PCI_CSR(0x50)
+#define IXP2000_PCI_MAILBOX1		IXP2000_PCI_CSR(0x54)
+#define IXP2000_PCI_MAILBOX2		IXP2000_PCI_CSR(0x58)
+#define IXP2000_PCI_MAILBOX3		IXP2000_PCI_CSR(0x5C)
+#define IXP2000_XSCALE_DOORBELL		IXP2000_PCI_CSR(0x60)
+#define IXP2000_XSCALE_DOORBELL_SETUP	IXP2000_PCI_CSR(0x64)
+#define IXP2000_PCI_DOORBELL		IXP2000_PCI_CSR(0x70)
+#define IXP2000_PCI_DOORBELL_SETUP	IXP2000_PCI_CSR(0x74)
+
+/*
+ * DMA engines
+ */
+#define IXP2000_PCI_CH1_BYTE_CNT	IXP2000_PCI_CSR(0x80)
+#define IXP2000_PCI_CH1_ADDR		IXP2000_PCI_CSR(0x84)
+#define IXP2000_PCI_CH1_DRAM_ADDR	IXP2000_PCI_CSR(0x88)
+#define IXP2000_PCI_CH1_DESC_PTR	IXP2000_PCI_CSR(0x8C)
+#define IXP2000_PCI_CH1_CNTRL		IXP2000_PCI_CSR(0x90)
+#define IXP2000_PCI_CH1_ME_PARAM	IXP2000_PCI_CSR(0x94)
+#define IXP2000_PCI_CH2_BYTE_CNT	IXP2000_PCI_CSR(0xA0)
+#define IXP2000_PCI_CH2_ADDR		IXP2000_PCI_CSR(0xA4)
+#define IXP2000_PCI_CH2_DRAM_ADDR	IXP2000_PCI_CSR(0xA8)
+#define IXP2000_PCI_CH2_DESC_PTR	IXP2000_PCI_CSR(0xAC)
+#define IXP2000_PCI_CH2_CNTRL		IXP2000_PCI_CSR(0xB0)
+#define IXP2000_PCI_CH2_ME_PARAM	IXP2000_PCI_CSR(0xB4)
+#define IXP2000_PCI_CH3_BYTE_CNT	IXP2000_PCI_CSR(0xC0)
+#define IXP2000_PCI_CH3_ADDR		IXP2000_PCI_CSR(0xC4)
+#define IXP2000_PCI_CH3_DRAM_ADDR	IXP2000_PCI_CSR(0xC8)
+#define IXP2000_PCI_CH3_DESC_PTR	IXP2000_PCI_CSR(0xCC)
+#define IXP2000_PCI_CH3_CNTRL		IXP2000_PCI_CSR(0xD0)
+#define IXP2000_PCI_CH3_ME_PARAM	IXP2000_PCI_CSR(0xD4)
+#define IXP2000_DMA_INF_MODE		IXP2000_PCI_CSR(0xE0)
+/*
+ * Size masks for BARs
+ */
+#define IXP2000_PCI_SRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0xFC)
+#define IXP2000_PCI_DRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0x100)
+/*
+ * Control and uEngine related
+ */
+#define IXP2000_PCI_CONTROL		IXP2000_PCI_CSR(0x13C)
+#define IXP2000_PCI_ADDR_EXT		IXP2000_PCI_CSR(0x140)
+#define IXP2000_PCI_ME_PUSH_STATUS	IXP2000_PCI_CSR(0x148)
+#define IXP2000_PCI_ME_PUSH_EN		IXP2000_PCI_CSR(0x14C)
+#define IXP2000_PCI_ERR_STATUS		IXP2000_PCI_CSR(0x150)
+#define IXP2000_PCI_ERR_ENABLE		IXP2000_PCI_CSR(0x154)
+/*
+ * Inbound PCI interrupt control
+ */
+#define IXP2000_PCI_XSCALE_INT_STATUS	IXP2000_PCI_CSR(0x158)
+#define IXP2000_PCI_XSCALE_INT_ENABLE	IXP2000_PCI_CSR(0x15C)
+
+#define IXP2000_PCICNTL_PNR		(1<<17)	/* PCI not Reset bit of PCI_CONTROL */
+#define IXP2000_PCICNTL_PCF		(1<<28)	/* PCI Centrolfunction bit */
+#define IXP2000_XSCALE_INT		(1<<1)	/* Interrupt from XScale to PCI */
+
+/* These are from the IRQ register in the PCI ISR register */
+#define PCI_CONTROL_BE_DEO		(1 << 22)	/* Big Endian Data Enable Out */
+#define PCI_CONTROL_BE_DEI		(1 << 21)	/* Big Endian Data Enable In  */
+#define PCI_CONTROL_BE_BEO		(1 << 20)	/* Big Endian Byte Enable Out */
+#define PCI_CONTROL_BE_BEI		(1 << 19)	/* Big Endian Byte Enable In  */
+#define PCI_CONTROL_PNR			(1 << 17)	/* PCI Not Reset bit */
+
+#define IXP2000_PCI_RST_REL		(1 << 2)
+#define CFG_RST_DIR			(*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF)
+#define CFG_PCI_BOOT_HOST		(1 << 2)
+#define CFG_BOOT_PROM			(1 << 1)
+
+/*
+ * SlowPort CSRs
+ *
+ * The slowport is used to access things like flash, SONET framer control
+ * ports, slave microprocessors, CPLDs, and others of chip memory mapped
+ * peripherals.
+ */
+#define	SLOWPORT_CSR(x)		(volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x))
+
+#define	IXP2000_SLOWPORT_CCR		SLOWPORT_CSR(0x00)
+#define	IXP2000_SLOWPORT_WTC1		SLOWPORT_CSR(0x04)
+#define	IXP2000_SLOWPORT_WTC2		SLOWPORT_CSR(0x08)
+#define	IXP2000_SLOWPORT_RTC1		SLOWPORT_CSR(0x0c)
+#define	IXP2000_SLOWPORT_RTC2		SLOWPORT_CSR(0x10)
+#define	IXP2000_SLOWPORT_FSR		SLOWPORT_CSR(0x14)
+#define	IXP2000_SLOWPORT_PCR		SLOWPORT_CSR(0x18)
+#define	IXP2000_SLOWPORT_ADC		SLOWPORT_CSR(0x1C)
+#define	IXP2000_SLOWPORT_FAC		SLOWPORT_CSR(0x20)
+#define	IXP2000_SLOWPORT_FRM		SLOWPORT_CSR(0x24)
+#define	IXP2000_SLOWPORT_FIN		SLOWPORT_CSR(0x28)
+
+/*
+ * CCR values.  
+ * The CCR configures the clock division for the slowport interface.
+ */
+#define	SLOWPORT_CCR_DIV_1		0x00
+#define	SLOWPORT_CCR_DIV_2		0x01
+#define	SLOWPORT_CCR_DIV_4		0x02
+#define	SLOWPORT_CCR_DIV_6		0x03
+#define	SLOWPORT_CCR_DIV_8		0x04
+#define	SLOWPORT_CCR_DIV_10		0x05
+#define	SLOWPORT_CCR_DIV_12		0x06
+#define	SLOWPORT_CCR_DIV_14		0x07
+#define	SLOWPORT_CCR_DIV_16		0x08
+#define	SLOWPORT_CCR_DIV_18		0x09
+#define	SLOWPORT_CCR_DIV_20		0x0a
+#define	SLOWPORT_CCR_DIV_22		0x0b
+#define	SLOWPORT_CCR_DIV_24		0x0c
+#define	SLOWPORT_CCR_DIV_26		0x0d
+#define	SLOWPORT_CCR_DIV_28		0x0e
+#define	SLOWPORT_CCR_DIV_30		0x0f
+
+/*
+ * PCR values.  PCR configure the mode of the interface.
+ */
+#define	SLOWPORT_MODE_FLASH		0x00
+#define	SLOWPORT_MODE_LUCENT		0x01
+#define	SLOWPORT_MODE_PMC_SIERRA	0x02
+#define	SLOWPORT_MODE_INTEL_UP		0x03
+#define	SLOWPORT_MODE_MOTOROLA_UP	0x04
+
+/*
+ * ADC values.  Defines data and address bus widths.
+ */
+#define	SLOWPORT_ADDR_WIDTH_8		0x00
+#define	SLOWPORT_ADDR_WIDTH_16		0x01
+#define	SLOWPORT_ADDR_WIDTH_24		0x02
+#define	SLOWPORT_ADDR_WIDTH_32		0x03
+#define	SLOWPORT_DATA_WIDTH_8		0x00
+#define	SLOWPORT_DATA_WIDTH_16		0x10
+#define	SLOWPORT_DATA_WIDTH_24		0x20
+#define	SLOWPORT_DATA_WIDTH_32		0x30
+
+/*
+ * Masks and shifts for various fields in the WTC and RTC registers.
+ */
+#define	SLOWPORT_WRTC_MASK_HD		0x0003
+#define	SLOWPORT_WRTC_MASK_SU		0x003c
+#define	SLOWPORT_WRTC_MASK_PW		0x03c0
+
+#define	SLOWPORT_WRTC_SHIFT_HD		0x00
+#define	SLOWPORT_WRTC_SHIFT_SU		0x02
+#define	SLOWPORT_WRTC_SHFIT_PW		0x06
+
+
+/*
+ * GPIO registers & GPIO interface.
+ */
+#define IXP2000_GPIO_REG(x)		((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x)))
+#define IXP2000_GPIO_PLR		IXP2000_GPIO_REG(0x00)
+#define IXP2000_GPIO_PDPR		IXP2000_GPIO_REG(0x04)
+#define IXP2000_GPIO_PDSR		IXP2000_GPIO_REG(0x08)
+#define IXP2000_GPIO_PDCR		IXP2000_GPIO_REG(0x0c)
+#define IXP2000_GPIO_POPR		IXP2000_GPIO_REG(0x10)
+#define IXP2000_GPIO_POSR		IXP2000_GPIO_REG(0x14)
+#define IXP2000_GPIO_POCR		IXP2000_GPIO_REG(0x18)
+#define IXP2000_GPIO_REDR		IXP2000_GPIO_REG(0x1c)
+#define IXP2000_GPIO_FEDR		IXP2000_GPIO_REG(0x20)
+#define IXP2000_GPIO_EDSR		IXP2000_GPIO_REG(0x24)
+#define IXP2000_GPIO_LSHR		IXP2000_GPIO_REG(0x28)
+#define IXP2000_GPIO_LSLR		IXP2000_GPIO_REG(0x2c)
+#define IXP2000_GPIO_LDSR		IXP2000_GPIO_REG(0x30)
+#define IXP2000_GPIO_INER		IXP2000_GPIO_REG(0x34)
+#define IXP2000_GPIO_INSR		IXP2000_GPIO_REG(0x38)
+#define IXP2000_GPIO_INCR		IXP2000_GPIO_REG(0x3c)
+#define IXP2000_GPIO_INST		IXP2000_GPIO_REG(0x40)
+
+/*
+ * "Global" registers...whatever that's supposed to mean.
+ */
+#define GLOBAL_REG_BASE			(IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00)
+#define GLOBAL_REG(x)			(volatile unsigned long*)(GLOBAL_REG_BASE | (x))
+
+#define IXP2000_PROD_ID			GLOBAL_REG(0x00)
+
+#define IXP2000_MAJ_PROD_TYPE_MASK	0x001F0000
+#define IXP2000_MAJ_PROD_TYPE_IXP2000	0x00000000
+#define IXP2000_MIN_PROD_TYPE_MASK 	0x0000FF00
+#define IXP2000_MIN_PROD_TYPE_IXP2400	0x00000200
+#define IXP2000_MIN_PROD_TYPE_IXP2850	0x00000100
+#define IXP2000_MIN_PROD_TYPE_IXP2800	0x00000000
+#define IXP2000_MAJ_REV_MASK	      	0x000000F0
+#define IXP2000_MIN_REV_MASK	      	0x0000000F
+#define IXP2000_PROD_ID_MASK		0xFFFFFFFF
+
+#define IXP2000_MISC_CONTROL		GLOBAL_REG(0x04)
+#define IXP2000_MSF_CLK_CNTRL  		GLOBAL_REG(0x08)
+#define IXP2000_RESET0      		GLOBAL_REG(0x0c)
+#define IXP2000_RESET1      		GLOBAL_REG(0x10)
+#define IXP2000_CCR            		GLOBAL_REG(0x14)
+#define	IXP2000_STRAP_OPTIONS  		GLOBAL_REG(0x18)
+
+#define	RSTALL				(1 << 16)
+#define	WDT_RESET_ENABLE		0x01000000
+
+
+#endif				/* _IXP2000_H_ */