[ARM] 3143/1: OMAP 4/5: Update omap include files

Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.

This patch contains changes to common header files for
omap1xxx and omap24xx by various omap developers, and
improved cpu detection by Imre Deak

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 88 insertions, 239 deletions

diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
index 1b1ad410534..13415a9aab0 100644
--- a/include/asm-arm/arch-omap/mux.h
+++ b/include/asm-arm/arch-omap/mux.h
@@ -4,7 +4,7 @@
  * Table of the Omap register configurations for the FUNC_MUX and
  * PULL_DWN combinations.
  *
- * Copyright (C) 2003 Nokia Corporation
+ * Copyright (C) 2003 - 2005 Nokia Corporation
  *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
@@ -58,6 +58,16 @@
 					.pu_pd_reg = PU_PD_SEL_##reg, \
 					.pu_pd_val = status,
 
+#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
+					.mux_reg = OMAP730_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_730(reg, bit, status)	.pull_name = "OMAP730_IO_CONF_"#reg, \
+					.pull_reg = OMAP730_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
 #else
 
 #define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
@@ -71,6 +81,15 @@
 #define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
 					.pu_pd_val = status,
 
+#define MUX_REG_730(reg, mode_offset, mode) \
+					.mux_reg = OMAP730_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_730(reg, bit, status)	.pull_reg = OMAP730_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
 #endif /* CONFIG_OMAP_MUX_DEBUG */
 
 #define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
@@ -84,13 +103,44 @@
 	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
 },
 
+
+/*
+ * OMAP730 has a slightly different config for the pin mux.
+ * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
+ *   not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ *   as mux config
+ */
+#define MUX_CFG_730(desc, mux_reg, mode_offset, mode,	\
+		   pull_reg, pull_bit, pull_status,	\
+		   pu_pd_reg, pu_pd_status, debug_status)\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG_730(mux_reg, mode_offset, mode)		\
+	PULL_REG_730(mux_reg, pull_bit, pull_status)	\
+	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
+},
+
+#define MUX_CFG_24XX(desc, reg_offset, mode,			\
+				pull_en, pull_mode, dbg)	\
+{								\
+	.name		= desc,					\
+	.debug		= dbg,					\
+	.mux_reg	= reg_offset,				\
+	.mask		= mode,					\
+	.pull_val	= pull_en,				\
+	.pu_pd_val	= pull_mode,				\
+},
+
+
 #define PULL_DISABLED	0
 #define PULL_ENABLED	1
 
 #define PULL_DOWN	0
 #define PULL_UP		1
 
-typedef struct {
+struct pin_config {
 	char *name;
 	unsigned char busy;
 	unsigned char debug;
@@ -108,13 +158,23 @@ typedef struct {
 	const char *pu_pd_name;
 	const unsigned int pu_pd_reg;
 	const unsigned char pu_pd_val;
-} reg_cfg_set;
+};
 
-/*
- * Lookup table for FUNC_MUX and PULL_DWN register combinations for each
- * device. See also reg_cfg_table below for the register values.
- */
-typedef enum {
+enum omap730_index {
+	/* OMAP 730 keyboard */
+	E2_730_KBR0,
+	J7_730_KBR1,
+	E1_730_KBR2,
+	F3_730_KBR3,
+	D2_730_KBR4,
+	C2_730_KBC0,
+	D3_730_KBC1,
+	E4_730_KBC2,
+	F4_730_KBC3,
+	E3_730_KBC4,
+};
+
+enum omap1xxx_index {
 	/* UART1 (BT_UART_GATING)*/
 	UART1_TX = 0,
 	UART1_RTS,
@@ -331,245 +391,34 @@ typedef enum {
 	V10_1610_CF_IREQ,
 	W10_1610_CF_RESET,
 	W11_1610_CF_CD1,
-} reg_cfg_t;
+};
 
-#if defined(__MUX_C__) && defined(CONFIG_OMAP_MUX)
+enum omap24xx_index {
+	/* 24xx I2C */
+	M19_24XX_I2C1_SCL,
+	L15_24XX_I2C1_SDA,
+	J15_24XX_I2C2_SCL,
+	H19_24XX_I2C2_SDA,
 
-/*
- * Table of various FUNC_MUX and PULL_DWN combinations for each device.
- * See also reg_cfg_t above for the lookup table.
- */
-static const reg_cfg_set __initdata_or_module
-reg_cfg_table[] = {
-/*
- *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
- *				reg  offset mode reg  bit   ena	  reg
- */
-MUX_CFG("UART1_TX",		 9,   21,    1,	  2,   3,   0,	 NA,	 0,  0)
-MUX_CFG("UART1_RTS",		 9,   12,    1,	  2,   0,   0,	 NA,	 0,  0)
-
-/* UART2 (COM_UART_GATING), conflicts with USB2 */
-MUX_CFG("UART2_TX",		 C,   27,    1,	  3,   3,   0,	 NA,	 0,  0)
-MUX_CFG("UART2_RX",		 C,   18,    0,	  3,   1,   1,	 NA,	 0,  0)
-MUX_CFG("UART2_CTS",		 C,   21,    0,	  3,   1,   1,	 NA,	 0,  0)
-MUX_CFG("UART2_RTS",		 C,   24,    1,	  3,   2,   0,	 NA,	 0,  0)
-
-/* UART3 (GIGA_UART_GATING) */
-MUX_CFG("UART3_TX",		 6,    0,    1,	  0,  30,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_RX",		 6,    3,    0,	  0,  31,   1,	 NA,	 0,  0)
-MUX_CFG("UART3_CTS",		 5,   12,    2,	  0,  24,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_RTS",		 5,   15,    2,	  0,  25,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_CLKREQ",		 9,   27,    0,	  2,   5,   0,	 NA,	 0,  0)
-MUX_CFG("UART3_BCLK",		 A,    0,    0,	  2,   6,   0,	 NA,	 0,  0)
-MUX_CFG("Y15_1610_UART3_RTS",	 A,    0,    1,	  2,   6,   0,	 NA,	 0,  0)
-
-/* PWT & PWL, conflicts with UART3 */
-MUX_CFG("PWT",		 	 6,    0,    2,	  0,  30,   0,	 NA,	 0,  0)
-MUX_CFG("PWL",		 	 6,    3,    1,	  0,  31,   1,	 NA,	 0,  0)
-
-/* USB internal master generic */
-MUX_CFG("R18_USB_VBUS",		 7,    9,    2,	  1,  11,   0,	 NA,	 0,  1)
-MUX_CFG("R18_1510_USB_GPIO0",	 7,    9,    0,	  1,  11,   1,	 NA,	 0,  1)
-/* works around erratum:  W4_USB_PUEN and W4_USB_PUDIS are switched! */
-MUX_CFG("W4_USB_PUEN",		 D,    3,    3,	  3,   5,   1,	 NA,	 0,  1)
-MUX_CFG("W4_USB_CLKO",		 D,    3,    1,	  3,   5,   0,	 NA,	 0,  1)
-MUX_CFG("W4_USB_HIGHZ",		 D,    3,    4,	  3,   5,   0,	  3,	 0,  1)
-MUX_CFG("W4_GPIO58",		 D,    3,    7,	  3,   5,   0,	  3,	 0,  1)
-
-/* USB1 master */
-MUX_CFG("USB1_SUSP",		 8,   27,    2,	  1,  27,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_SE0",		 9,    0,    2,	  1,  28,   0,	 NA,	 0,  1)
-MUX_CFG("W13_1610_USB1_SE0",	 9,    0,    4,	  1,  28,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_TXEN",		 9,    3,    2,	  1,  29,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_TXD",		 9,   24,    1,	  2,   4,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_VP",		 A,    3,    1,	  2,   7,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_VM",		 A,    6,    1,	  2,   8,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_RCV",		 A,    9,    1,	  2,   9,   0,	 NA,	 0,  1)
-MUX_CFG("USB1_SPEED",		 A,   12,    2,	  2,  10,   0,	 NA,	 0,  1)
-MUX_CFG("R13_1610_USB1_SPEED",	 A,   12,    5,	  2,  10,   0,	 NA,	 0,  1)
-MUX_CFG("R13_1710_USB1_SEO",	 A,   12,    5,   2,  10,   0,   NA,     0,  1)
-
-/* USB2 master */
-MUX_CFG("USB2_SUSP",		 B,    3,    1,	  2,  17,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_VP",		 B,    6,    1,	  2,  18,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_TXEN",		 B,    9,    1,	  2,  19,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_VM",		 C,   18,    1,	  3,   0,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_RCV",		 C,   21,    1,	  3,   1,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_SE0",		 C,   24,    2,	  3,   2,   0,	 NA,	 0,  1)
-MUX_CFG("USB2_TXD",		 C,   27,    2,	  3,   3,   0,	 NA,	 0,  1)
-
-/* OMAP-1510 GPIO */
-MUX_CFG("R18_1510_GPIO0",	 7,    9,    0,   1,  11,   1,    0,     0,  1)
-MUX_CFG("R19_1510_GPIO1",	 7,    6,    0,   1,  10,   1,    0,     0,  1)
-MUX_CFG("M14_1510_GPIO2",	 7,    3,    0,   1,   9,   1,    0,     0,  1)
-
-/* OMAP1610 GPIO */
-MUX_CFG("P18_1610_GPIO3",	 7,    0,    0,   1,   8,   0,   NA,     0,  1)
-MUX_CFG("Y15_1610_GPIO17",	 A,    0,    7,   2,   6,   0,   NA,     0,  1)
-
-/* OMAP-1710 GPIO */
-MUX_CFG("R18_1710_GPIO0",        7,    9,    0,   1,  11,   1,    1,     1,  1)
-MUX_CFG("V2_1710_GPIO10",        F,   27,    1,   4,   3,   1,    4,     1,  1)
-MUX_CFG("N21_1710_GPIO14",       6,    9,    0,   1,   1,   1,    1,     1,  1)
-MUX_CFG("W15_1710_GPIO40",       9,   27,    7,   2,   5,   1,    2,     1,  1)
-
-/* MPUIO */
-MUX_CFG("MPUIO2",		 7,   18,    0,	  1,  14,   1,	 NA,	 0,  1)
-MUX_CFG("N15_1610_MPUIO2",	 7,   18,    0,	  1,  14,   1,	  1,	 0,  1)
-MUX_CFG("MPUIO4",		 7,   15,    0,	  1,  13,   1,	 NA,	 0,  1)
-MUX_CFG("MPUIO5",		 7,   12,    0,	  1,  12,   1,	 NA,	 0,  1)
-
-MUX_CFG("T20_1610_MPUIO5",	 7,   12,    0,	  1,  12,   0,	  3,	 0,  1)
-MUX_CFG("W11_1610_MPUIO6",	10,   15,    2,	  3,   8,   0,	  3,	 0,  1)
-MUX_CFG("V10_1610_MPUIO7",	 A,   24,    2,	  2,  14,   0,	  2,	 0,  1)
-MUX_CFG("W11_1610_MPUIO9",	10,   15,    1,	  3,   8,   0,	  3,	 0,  1)
-MUX_CFG("V10_1610_MPUIO10",	 A,   24,    1,	  2,  14,   0,	  2,	 0,  1)
-MUX_CFG("W10_1610_MPUIO11",	 A,   18,    2,	  2,  11,   0,	  2,	 0,  1)
-MUX_CFG("E20_1610_MPUIO13",	 3,   21,    1,	  0,   7,   0,	  0,	 0,  1)
-MUX_CFG("U20_1610_MPUIO14",	 9,    6,    6,	  0,  30,   0,	  0,	 0,  1)
-MUX_CFG("E19_1610_MPUIO15",	 3,   18,    1,	  0,   6,   0,	  0,	 0,  1)
-
-/* MCBSP2 */
-MUX_CFG("MCBSP2_CLKR",		 C,    6,    0,	  2,  27,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_CLKX",		 C,    9,    0,	  2,  29,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_DR",		 C,    0,    0,	  2,  26,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_DX",		 C,   15,    0,	  2,  31,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_FSR",		 C,   12,    0,	  2,  30,   1,	 NA,	 0,  1)
-MUX_CFG("MCBSP2_FSX",		 C,    3,    0,	  2,  27,   1,	 NA,	 0,  1)
-
-/* MCBSP3 NOTE: Mode must 1 for clock */
-MUX_CFG("MCBSP3_CLKX",		 9,    3,    1,	  1,  29,   0,	 NA,	 0,  1)
-
-/* Misc ballouts */
-MUX_CFG("BALLOUT_V8_ARMIO3",	 B,   18,    0,	  2,  25,   1,	 NA,	 0,  1)
-MUX_CFG("N20_HDQ",	       6,   18,    1,   1,   4,   0,    1,     4,  0)
-
-/* OMAP-1610 MMC2 */
-MUX_CFG("W8_1610_MMC2_DAT0",	 B,   21,    6,	  2,  23,   1,	  2,	 1,  1)
-MUX_CFG("V8_1610_MMC2_DAT1",	 B,   27,    6,	  2,  25,   1,	  2,	 1,  1)
-MUX_CFG("W15_1610_MMC2_DAT2",	 9,   12,    6,	  2,   5,   1,	  2,	 1,  1)
-MUX_CFG("R10_1610_MMC2_DAT3",	 B,   18,    6,	  2,  22,   1,	  2,	 1,  1)
-MUX_CFG("Y10_1610_MMC2_CLK",	 B,    3,    6,	  2,  17,   0,	  2,	 0,  1)
-MUX_CFG("Y8_1610_MMC2_CMD",	 B,   24,    6,	  2,  24,   1,	  2,	 1,  1)
-MUX_CFG("V9_1610_MMC2_CMDDIR",	 B,   12,    6,	  2,  20,   0,	  2,	 1,  1)
-MUX_CFG("V5_1610_MMC2_DATDIR0",	 B,   15,    6,	  2,  21,   0,	  2,	 1,  1)
-MUX_CFG("W19_1610_MMC2_DATDIR1", 8,   15,    6,	  1,  23,   0,	  1,	 1,  1)
-MUX_CFG("R18_1610_MMC2_CLKIN",	 7,    9,    6,	  1,  11,   0,	  1,	11,  1)
-
-/* OMAP-1610 External Trace Interface */
-MUX_CFG("M19_1610_ETM_PSTAT0",	 5,   27,    1,	  0,  29,   0,	  0,	 0,  1)
-MUX_CFG("L15_1610_ETM_PSTAT1",	 5,   24,    1,	  0,  28,   0,	  0,	 0,  1)
-MUX_CFG("L18_1610_ETM_PSTAT2",	 5,   21,    1,	  0,  27,   0,	  0,	 0,  1)
-MUX_CFG("L19_1610_ETM_D0",	 5,   18,    1,	  0,  26,   0,	  0,	 0,  1)
-MUX_CFG("J19_1610_ETM_D6",	 5,    0,    1,	  0,  20,   0,	  0,	 0,  1)
-MUX_CFG("J18_1610_ETM_D7",	 5,   27,    1,	  0,  19,   0,	  0,	 0,  1)
-
-/* OMAP16XX GPIO */
-MUX_CFG("P20_1610_GPIO4",	 6,   27,    0,	  1,   7,   0,	  1,	 1,  1)
-MUX_CFG("V9_1610_GPIO7",	 B,   12,    1,	  2,  20,   0,	  2,	 1,  1)
-MUX_CFG("W8_1610_GPIO9",	 B,   21,    0,	  2,  23,   0,	  2,	 1,  1)
-MUX_CFG("N20_1610_GPIO11",       6,   18,    0,   1,   4,   0,    1,     1,  1)
-MUX_CFG("N19_1610_GPIO13",	 6,   12,    0,	  1,   2,   0,	  1,	 1,  1)
-MUX_CFG("P10_1610_GPIO22",	 C,    0,    7,	  2,  26,   0,	  2,	 1,  1)
-MUX_CFG("V5_1610_GPIO24",	 B,   15,    7,	  2,  21,   0,	  2,	 1,  1)
-MUX_CFG("AA20_1610_GPIO_41",	 9,    9,    7,	  1,  31,   0,	  1,	 1,  1)
-MUX_CFG("W19_1610_GPIO48",	 8,   15,    7,   1,  23,   1,    1,     0,  1)
-MUX_CFG("M7_1610_GPIO62",	10,    0,    0,   4,  24,   0,    4,     0,  1)
-MUX_CFG("V14_16XX_GPIO37",	 9,   18,    7,	  2,   2,   0,	  2,	 2,  0)
-MUX_CFG("R9_16XX_GPIO18",	 C,   18,    7,   3,   0,   0,    3,     0,  0)
-MUX_CFG("L14_16XX_GPIO49",	 6,    3,    7,   0,  31,   0,    0,    31,  0)
-
-/* OMAP-1610 uWire */
-MUX_CFG("V19_1610_UWIRE_SCLK",	 8,    6,    0,	  1,  20,   0,	  1,	 1,  1)
-MUX_CFG("U18_1610_UWIRE_SDI",	 8,    0,    0,	  1,  18,   0,	  1,	 1,  1)
-MUX_CFG("W21_1610_UWIRE_SDO",	 8,    3,    0,	  1,  19,   0,	  1,	 1,  1)
-MUX_CFG("N14_1610_UWIRE_CS0",	 8,    9,    1,	  1,  21,   0,	  1,	 1,  1)
-MUX_CFG("P15_1610_UWIRE_CS3",	 8,   12,    1,	  1,  22,   0,	  1,	 1,  1)
-MUX_CFG("N15_1610_UWIRE_CS1",	 7,   18,    2,	  1,  14,   0,	 NA,	 0,  1)
-
-/* OMAP-1610 Flash */
-MUX_CFG("L3_1610_FLASH_CS2B_OE",10,    6,    1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("M8_1610_FLASH_CS2B_WE",10,    3,    1,	 NA,   0,   0,	 NA,	 0,  1)
-
-/* First MMC interface, same on 1510, 1610 and 1710 */
-MUX_CFG("MMC_CMD",		 A,   27,    0,	  2,  15,   1,	  2,	 1,  1)
-MUX_CFG("MMC_DAT1",		 A,   24,    0,	  2,  14,   1,	  2,	 1,  1)
-MUX_CFG("MMC_DAT2",		 A,   18,    0,	  2,  12,   1,	  2,	 1,  1)
-MUX_CFG("MMC_DAT0",		 B,    0,    0,	  2,  16,   1,	  2,	 1,  1)
-MUX_CFG("MMC_CLK",		 A,   21,    0,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("MMC_DAT3",		10,   15,    0,	  3,   8,   1,	  3,	 1,  1)
-MUX_CFG("M15_1710_MMC_CLKI",	 6,   21,    2,   0,   0,   0,   NA,     0,  1)
-MUX_CFG("P19_1710_MMC_CMDDIR",	 6,   24,    6,   0,   0,   0,   NA,     0,  1)
-MUX_CFG("P20_1710_MMC_DATDIR0",	 6,   27,    5,   0,   0,   0,   NA,     0,  1)
-
-/* OMAP-1610 USB0 alternate configuration */
-MUX_CFG("W9_USB0_TXEN",		 B,   9,     5,	  2,  19,   0,	  2,	 0,  1)
-MUX_CFG("AA9_USB0_VP",		 B,   6,     5,	  2,  18,   0,	  2,	 0,  1)
-MUX_CFG("Y5_USB0_RCV",		 C,  21,     5,	  3,   1,   0,	  1,	 0,  1)
-MUX_CFG("R9_USB0_VM",		 C,  18,     5,	  3,   0,   0,	  3,	 0,  1)
-MUX_CFG("V6_USB0_TXD",		 C,  27,     5,	  3,   3,   0,	  3,	 0,  1)
-MUX_CFG("W5_USB0_SE0",		 C,  24,     5,	  3,   2,   0,	  3,	 0,  1)
-MUX_CFG("V9_USB0_SPEED",	 B,  12,     5,	  2,  20,   0,	  2,	 0,  1)
-MUX_CFG("Y10_USB0_SUSP",	 B,   3,     5,	  2,  17,   0,	  2,	 0,  1)
-
-/* USB2 interface */
-MUX_CFG("W9_USB2_TXEN",		 B,   9,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("AA9_USB2_VP",		 B,   6,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("Y5_USB2_RCV",		 C,  21,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("R9_USB2_VM",		 C,  18,     1,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("V6_USB2_TXD",		 C,  27,     2,	 NA,   0,   0,	 NA,	 0,  1)
-MUX_CFG("W5_USB2_SE0",		 C,  24,     2,	 NA,   0,   0,	 NA,	 0,  1)
-
-/* 16XX UART */
-MUX_CFG("R13_1610_UART1_TX",	 A,  12,     6,	  2,  10,   0,	  2,	10,  1)
-MUX_CFG("V14_16XX_UART1_RX",	 9,  18,     0,	  2,   2,   0,	  2,	 2,  1)
-MUX_CFG("R14_1610_UART1_CTS",	 9,  15,     0,	  2,   1,   0,	  2,	 1,  1)
-MUX_CFG("AA15_1610_UART1_RTS",	 9,  12,     1,	  2,   0,   0,	  2,	 0,  1)
-MUX_CFG("R9_16XX_UART2_RX",	 C,  18,     0,   3,   0,   0,    3,     0,  1)
-MUX_CFG("L14_16XX_UART3_RX",	 6,   3,     0,   0,  31,   0,    0,    31,  1)
-
-/* I2C interface */
-MUX_CFG("I2C_SCL",		 7,  24,     0,	 NA,   0,   0,	 NA,	 0,  0)
-MUX_CFG("I2C_SDA",		 7,  27,     0,	 NA,   0,   0,	 NA,	 0,  0)
-
-/* Keypad */
-MUX_CFG("F18_1610_KBC0",	 3,  15,     0,	  0,   5,   1,	  0,	 0,  0)
-MUX_CFG("D20_1610_KBC1",	 3,  12,     0,	  0,   4,   1,	  0,	 0,  0)
-MUX_CFG("D19_1610_KBC2",	 3,   9,     0,	  0,   3,   1,	  0,	 0,  0)
-MUX_CFG("E18_1610_KBC3",	 3,   6,     0,	  0,   2,   1,	  0,	 0,  0)
-MUX_CFG("C21_1610_KBC4",	 3,   3,     0,	  0,   1,   1,	  0,	 0,  0)
-MUX_CFG("G18_1610_KBR0",	 4,   0,     0,	  0,   10,  1,	  0,	 1,  0)
-MUX_CFG("F19_1610_KBR1",	 3,   27,    0,	  0,   9,   1,	  0,	 1,  0)
-MUX_CFG("H14_1610_KBR2",	 3,   24,    0,	  0,   8,   1,	  0,	 1,  0)
-MUX_CFG("E20_1610_KBR3",	 3,   21,    0,	  0,   7,   1,	  0,	 1,  0)
-MUX_CFG("E19_1610_KBR4",	 3,   18,    0,	  0,   6,   1,	  0,	 1,  0)
-MUX_CFG("N19_1610_KBR5",	 6,  12,     1,	  1,   2,   1,	  1,	 1,  0)
-
-/* Power management */
-MUX_CFG("T20_1610_LOW_PWR",	 7,   12,    1,	  NA,   0,   0,   NA,	 0,  0)
-
-/* MCLK Settings */
-MUX_CFG("V5_1710_MCLK_ON",	 B,   15,    0,	  NA,   0,   0,   NA,	 0,  0)
-MUX_CFG("V5_1710_MCLK_OFF",	 B,   15,    6,	  NA,   0,   0,   NA,	 0,  0)
-MUX_CFG("R10_1610_MCLK_ON",	 B,   18,    0,	  NA,  22,   0,	  NA,	 1,  0)
-MUX_CFG("R10_1610_MCLK_OFF",	 B,   18,    6,	  2,   22,   1,	  2,	 1,  1)
-
-/* CompactFlash controller, conflicts with MMC1 */
-MUX_CFG("P11_1610_CF_CD2",	 A,   27,    3,	  2,   15,   1,	  2,	 1,  1)
-MUX_CFG("R11_1610_CF_IOIS16",	 B,    0,    3,	  2,   16,   1,	  2,	 1,  1)
-MUX_CFG("V10_1610_CF_IREQ",	 A,   24,    3,	  2,   14,   0,	  2,	 0,  1)
-MUX_CFG("W10_1610_CF_RESET",	 A,   18,    3,	  2,   12,   1,	  2,	 1,  1)
-MUX_CFG("W11_1610_CF_CD1",	10,   15,    3,	  3,    8,   1,	  3,	 1,  1)
-};
+	/* 24xx Menelaus interrupt */
+	W19_24XX_SYS_NIRQ,
 
-#endif	/* __MUX_C__ */
+	/* 24xx GPIO */
+	Y20_24XX_GPIO60,
+	M15_24XX_GPIO92,
+};
 
 #ifdef	CONFIG_OMAP_MUX
 /* setup pin muxing in Linux */
-extern int omap_cfg_reg(reg_cfg_t reg_cfg);
+extern int omap1_mux_init(void);
+extern int omap2_mux_init(void);
+extern int omap_mux_register(struct pin_config * pins, unsigned long size);
+extern int omap_cfg_reg(unsigned long reg_cfg);
 #else
 /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
-static inline int omap_cfg_reg(reg_cfg_t reg_cfg) { return 0; }
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap2_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
 #endif
 
 #endif