[ARM] 2888/1: OMAP 3/4: Update omap include files, take 2

Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:
- Start adding 24xx support by Paul Mundt
- Clean-up of cpu detection by Dirk Behme and Tony Lindgren
- Add DSP header by Toshihiro Kobayashi
- Add support for mtd-xip by Vladimir Barinov
- Add various new mux registers
- Move OMAP specific serial defines back to serial.h

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

26 files changed, 767 insertions, 238 deletions

diff --git a/include/asm-arm/arch-omap/board-h4.h b/include/asm-arm/arch-omap/board-h4.h
index 79138dcfb4a..d64ee9211ee 100644
--- a/include/asm-arm/arch-omap/board-h4.h
+++ b/include/asm-arm/arch-omap/board-h4.h
@@ -30,6 +30,9 @@
 #define __ASM_ARCH_OMAP_H4_H
 
 /* Placeholder for H4 specific defines */
+/* GPMC CS1 */
+#define OMAP24XX_ETHR_START             0x08000300
+#define OMAP24XX_ETHR_GPIO_IRQ		92
 
 #endif /*  __ASM_ARCH_OMAP_H4_H */
 
diff --git a/include/asm-arm/arch-omap/board-innovator.h b/include/asm-arm/arch-omap/board-innovator.h
index 0f1abaefe4d..79574e0ed13 100644
--- a/include/asm-arm/arch-omap/board-innovator.h
+++ b/include/asm-arm/arch-omap/board-innovator.h
@@ -36,31 +36,6 @@
 #define OMAP1510P1_EMIFS_PRI_VALUE		0x00
 #define OMAP1510P1_EMIFF_PRI_VALUE		0x00
 
-/*
- * These definitions define an area of FLASH set aside
- * for the use of MTD/JFFS2. This is the area of flash
- * that a JFFS2 filesystem will reside which is mounted
- * at boot with the "root=/dev/mtdblock/0 rw"
- * command line option. The flash address used here must
- * fall within the legal range defined by rrload for storing
- * the filesystem component. This address will be sufficiently
- * deep into the overall flash range to avoid the other
- * components also stored in flash such as the bootloader,
- * the bootloader params, and the kernel.
- * The SW2 settings for the map below are:
- * 1 off, 2 off, 3 on, 4 off.
- */
-
-/* Intel flash_0, partitioned as expected by rrload */
-#define OMAP_FLASH_0_BASE	0xD8000000
-#define OMAP_FLASH_0_START	0x00000000
-#define OMAP_FLASH_0_SIZE	SZ_16M
-
-/* Intel flash_1, used for cramfs or other flash file systems */
-#define OMAP_FLASH_1_BASE	0xD9000000
-#define OMAP_FLASH_1_START	0x01000000
-#define OMAP_FLASH_1_SIZE	SZ_16M
-
 #define NR_FPGA_IRQS		24
 #define NR_IRQS                 IH_BOARD_BASE + NR_FPGA_IRQS
 
diff --git a/include/asm-arm/arch-omap/board-perseus2.h b/include/asm-arm/arch-omap/board-perseus2.h
index 0c224cc74fe..691e52a52b4 100644
--- a/include/asm-arm/arch-omap/board-perseus2.h
+++ b/include/asm-arm/arch-omap/board-perseus2.h
@@ -36,23 +36,14 @@
 #define OMAP_SDRAM_DEVICE		D256M_1X16_4B
 #endif
 
-/*
- * These definitions define an area of FLASH set aside
- * for the use of MTD/JFFS2. This is the area of flash
- * that a JFFS2 filesystem will reside which is mounted
- * at boot with the "root=/dev/mtdblock/0 rw"
- * command line option.
- */
-
-/* Intel flash_0, partitioned as expected by rrload */
-#define OMAP_FLASH_0_BASE	0xD8000000	/* VA */
-#define OMAP_FLASH_0_START	0x00000000	/* PA */
-#define OMAP_FLASH_0_SIZE	SZ_32M
-
 #define MAXIRQNUM		IH_BOARD_BASE
 #define MAXFIQNUM		MAXIRQNUM
 #define MAXSWINUM		MAXIRQNUM
 
 #define NR_IRQS			(MAXIRQNUM + 1)
 
+/* Samsung NAND flash at CS2B or CS3(NAND Boot) */
+#define OMAP_NAND_FLASH_START1	   0x0A000000 /* CS2B */
+#define OMAP_NAND_FLASH_START2	   0x0C000000 /* CS3 */
+
 #endif
diff --git a/include/asm-arm/arch-omap/board-voiceblue.h b/include/asm-arm/arch-omap/board-voiceblue.h
index 33977b8956f..ed6d346ee12 100644
--- a/include/asm-arm/arch-omap/board-voiceblue.h
+++ b/include/asm-arm/arch-omap/board-voiceblue.h
@@ -11,11 +11,6 @@
 #ifndef __ASM_ARCH_VOICEBLUE_H
 #define __ASM_ARCH_VOICEBLUE_H
 
-#if (EXTERNAL_MAX_NR_PORTS < 4)
-#undef EXTERNAL_MAX_NR_PORTS
-#define EXTERNAL_MAX_NR_PORTS	4
-#endif
-
 extern void voiceblue_wdt_enable(void);
 extern void voiceblue_wdt_disable(void);
 extern void voiceblue_wdt_ping(void);
diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
index 95bd625480c..a0040cd8663 100644
--- a/include/asm-arm/arch-omap/board.h
+++ b/include/asm-arm/arch-omap/board.h
@@ -30,10 +30,23 @@ struct omap_clock_config {
 	u8 system_clock_type;
 };
 
+struct omap_mmc_conf {
+	unsigned enabled:1;
+	/* nomux means "standard" muxing is wrong on this board, and that
+	 * board-specific code handled it before common init logic.
+	 */
+	unsigned nomux:1;
+	/* switch pin can be for card detect (default) or card cover */
+	unsigned cover:1;
+	/* 4 wire signaling is optional, and is only used for SD/SDIO */
+	unsigned wire4:1;
+	s16 power_pin;
+	s16 switch_pin;
+	s16 wp_pin;
+};
+
 struct omap_mmc_config {
-	u8 mmc_blocks;
-	s16 mmc1_power_pin, mmc2_power_pin;
-	s16 mmc1_switch_pin, mmc2_switch_pin;
+	struct omap_mmc_conf mmc[2];
 };
 
 struct omap_serial_console_config {
diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h
index e8786713ee5..1119e2b53e7 100644
--- a/include/asm-arm/arch-omap/cpu.h
+++ b/include/asm-arm/arch-omap/cpu.h
@@ -38,146 +38,179 @@ extern unsigned int system_rev;
 /*
  * Test if multicore OMAP support is needed
  */
-#undef MULTI_OMAP
+#undef MULTI_OMAP1
+#undef MULTI_OMAP2
 #undef OMAP_NAME
 
 #ifdef CONFIG_ARCH_OMAP730
 # ifdef OMAP_NAME
-#  undef  MULTI_OMAP
-#  define MULTI_OMAP
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
 # else
 #  define OMAP_NAME omap730
 # endif
 #endif
 #ifdef CONFIG_ARCH_OMAP1510
 # ifdef OMAP_NAME
-#  undef  MULTI_OMAP
-#  define MULTI_OMAP
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
 # else
 #  define OMAP_NAME omap1510
 # endif
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 # ifdef OMAP_NAME
-#  undef  MULTI_OMAP
-#  define MULTI_OMAP
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
 # else
-#  define OMAP_NAME omap1610
+#  define OMAP_NAME omap16xx
 # endif
 #endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP
-#  define MULTI_OMAP
+#ifdef CONFIG_ARCH_OMAP24XX
+# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
+#  error "OMAP1 and OMAP2 can't be selected at the same time"
 # else
-#  define OMAP_NAME omap1710
+#  undef  MULTI_OMAP2
+#  define OMAP_NAME omap24xx
 # endif
 #endif
 
 /*
- * Generate various OMAP cpu specific macros, and cpu class
- * specific macros
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx():	True for OMAP730
+ * cpu_is_omap15xx():	True for OMAP1510 and OMAP5910
+ * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
+ * cpu_is_omap24xx():	True for OMAP2420
  */
-#define GET_OMAP_TYPE	((system_rev >> 24) & 0xff)
 #define GET_OMAP_CLASS	(system_rev & 0xff)
 
-#define IS_OMAP_TYPE(type, id)				\
-static inline int is_omap ##type (void)			\
-{							\
-	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
-}
-
 #define IS_OMAP_CLASS(class, id)			\
 static inline int is_omap ##class (void)		\
 {							\
 	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
 }
 
-IS_OMAP_TYPE(730, 0x07)
-IS_OMAP_TYPE(1510, 0x15)
-IS_OMAP_TYPE(1610, 0x16)
-IS_OMAP_TYPE(5912, 0x16)
-IS_OMAP_TYPE(1710, 0x17)
-IS_OMAP_TYPE(2420, 0x24)
-
 IS_OMAP_CLASS(7xx, 0x07)
 IS_OMAP_CLASS(15xx, 0x15)
 IS_OMAP_CLASS(16xx, 0x16)
 IS_OMAP_CLASS(24xx, 0x24)
 
-/*
- * Macros to group OMAP types into cpu classes.
- * These can be used in most places.
- * cpu_is_omap15xx():	True for 1510 and 5910
- * cpu_is_omap16xx():	True for 1610, 5912 and 1710
- */
-#if defined(MULTI_OMAP)
-# define cpu_is_omap7xx()		is_omap7xx()
-# define cpu_is_omap15xx()		is_omap15xx()
-# if !(defined(CONFIG_ARCH_OMAP1510) || defined(CONFIG_ARCH_OMAP730))
-#  define cpu_is_omap16xx()		1
-# else
+#define cpu_is_omap7xx()		0
+#define cpu_is_omap15xx()		0
+#define cpu_is_omap16xx()		0
+#define cpu_is_omap24xx()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP1510)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
 #  define cpu_is_omap16xx()		is_omap16xx()
 # endif
 #else
 # if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
 #  define cpu_is_omap7xx()		1
-# else
-#  define cpu_is_omap7xx()		0
 # endif
 # if defined(CONFIG_ARCH_OMAP1510)
+#  undef  cpu_is_omap15xx
 #  define cpu_is_omap15xx()		1
-# else
-#  define cpu_is_omap15xx()		0
 # endif
 # if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
 #  define cpu_is_omap16xx()		1
-# else
-#  define cpu_is_omap16xx()		0
+# endif
+# if defined(CONFIG_ARCH_OMAP24XX)
+#  undef  cpu_is_omap24xx
+#  define cpu_is_omap24xx()		1
 # endif
 #endif
 
-#if defined(MULTI_OMAP)
-# define cpu_is_omap730()		is_omap730()
-# define cpu_is_omap1510()		is_omap1510()
-# define cpu_is_omap1610()		is_omap1610()
-# define cpu_is_omap5912()		is_omap5912()
-# define cpu_is_omap1710()		is_omap1710()
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap730():	True for OMAP730
+ * cpu_is_omap1510():	True for OMAP1510
+ * cpu_is_omap1610():	True for OMAP1610
+ * cpu_is_omap1611():	True for OMAP1611
+ * cpu_is_omap5912():	True for OMAP5912
+ * cpu_is_omap1621():	True for OMAP1621
+ * cpu_is_omap1710():	True for OMAP1710
+ * cpu_is_omap2420():	True for OMAP2420
+ */
+#define GET_OMAP_TYPE	((system_rev >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id)				\
+static inline int is_omap ##type (void)			\
+{							\
+	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
+}
+
+IS_OMAP_TYPE(730, 0x0730)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+IS_OMAP_TYPE(2420, 0x2420)
+
+#define cpu_is_omap730()		0
+#define cpu_is_omap1510()		0
+#define cpu_is_omap1610()		0
+#define cpu_is_omap5912()		0
+#define cpu_is_omap1611()		0
+#define cpu_is_omap1621()		0
+#define cpu_is_omap1710()		0
+#define cpu_is_omap2420()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap730
+#  define cpu_is_omap730()		is_omap730()
+# endif
+# if defined(CONFIG_ARCH_OMAP1510)
+#  undef  cpu_is_omap1510
+#  define cpu_is_omap1510()		is_omap1510()
+# endif
 #else
 # if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap730
 #  define cpu_is_omap730()		1
-# else
-#  define cpu_is_omap730()		0
 # endif
 # if defined(CONFIG_ARCH_OMAP1510)
+#  undef  cpu_is_omap1510
 #  define cpu_is_omap1510()		1
-# else
-#  define cpu_is_omap1510()		0
 # endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  define cpu_is_omap1610()		1
-# else
-#  define cpu_is_omap1610()		0
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  define cpu_is_omap5912()		1
-# else
-#  define cpu_is_omap5912()		0
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
+#endif
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 1611B/5912 and 1710.
+ */
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef  cpu_is_omap1610
+# undef  cpu_is_omap1611
+# undef  cpu_is_omap5912
+# undef  cpu_is_omap1621
+# undef  cpu_is_omap1710
 # define cpu_is_omap1610()		is_omap1610()
+# define cpu_is_omap1611()		is_omap1611()
 # define cpu_is_omap5912()		is_omap5912()
+# define cpu_is_omap1621()		is_omap1621()
 # define cpu_is_omap1710()		is_omap1710()
-# else
-# define cpu_is_omap1610()		0
-# define cpu_is_omap5912()		0
-# define cpu_is_omap1710()		0
-# endif
-# if defined(CONFIG_ARCH_OMAP2420)
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2420)
+#  undef  cpu_is_omap2420
 #  define cpu_is_omap2420()		1
-# else
-#  define cpu_is_omap2420()		0
-# endif
 #endif
 
 #endif
diff --git a/include/asm-arm/arch-omap/debug-macro.S b/include/asm-arm/arch-omap/debug-macro.S
index 83bb458afd0..ca4f577f967 100644
--- a/include/asm-arm/arch-omap/debug-macro.S
+++ b/include/asm-arm/arch-omap/debug-macro.S
@@ -14,6 +14,7 @@
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
+#ifdef CONFIG_ARCH_OMAP1
 		moveq	\rx, #0xff000000	@ physical base address
 		movne	\rx, #0xfe000000	@ virtual base
 		orr	\rx, \rx, #0x00fb0000
@@ -23,6 +24,18 @@
 #if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
 		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
 #endif
+
+#elif  CONFIG_ARCH_OMAP2
+		moveq	\rx, #0x48000000	@ physical base address
+		movne	\rx, #0xd8000000	@ virtual base
+		orr	\rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+		add	\rx, \rx, #0x00002000	@ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		add	\rx, \rx, #0x00004000	@ UART 3
+#endif
+#endif
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h
index ce114ce5af5..04ebef5c6e9 100644
--- a/include/asm-arm/arch-omap/dma.h
+++ b/include/asm-arm/arch-omap/dma.h
@@ -240,6 +240,7 @@ extern void omap_dma_unlink_lch (int lch_head, int lch_queue);
 
 extern dma_addr_t omap_get_dma_src_pos(int lch);
 extern dma_addr_t omap_get_dma_dst_pos(int lch);
+extern int omap_get_dma_src_addr_counter(int lch);
 extern void omap_clear_dma(int lch);
 extern int omap_dma_running(void);
 
diff --git a/include/asm-arm/arch-omap/dmtimer.h b/include/asm-arm/arch-omap/dmtimer.h
new file mode 100644
index 00000000000..11772c792f3
--- /dev/null
+++ b/include/asm-arm/arch-omap/dmtimer.h
@@ -0,0 +1,92 @@
+/*
+ * linux/include/asm-arm/arm/arch-omap/dmtimer.h
+ *
+ * OMAP Dual-Mode Timers
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_TIMER_H
+#define __ASM_ARCH_TIMER_H
+
+#include <linux/list.h>
+
+#define OMAP_TIMER_SRC_ARMXOR		0x00
+#define OMAP_TIMER_SRC_32_KHZ		0x01
+#define OMAP_TIMER_SRC_EXT_CLK		0x02
+
+/* timer control reg bits */
+#define OMAP_TIMER_CTRL_CAPTMODE	(1 << 13)
+#define OMAP_TIMER_CTRL_PT		(1 << 12)
+#define OMAP_TIMER_CTRL_TRG_OVERFLOW	(0x1 << 10)
+#define OMAP_TIMER_CTRL_TRG_OFANDMATCH	(0x2 << 10)
+#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH	(0x1 << 8)
+#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW	(0x2 << 8)
+#define OMAP_TIMER_CTRL_TCM_BOTHEDGES	(0x3 << 8)
+#define OMAP_TIMER_CTRL_SCPWM		(1 << 7)
+#define OMAP_TIMER_CTRL_CE		(1 << 6)	/* compare enable */
+#define OMAP_TIMER_CTRL_PRE		(1 << 5)	/* prescaler enable */
+#define OMAP_TIMER_CTRL_PTV_SHIFT	2		/* how much to shift the prescaler value */
+#define OMAP_TIMER_CTRL_AR		(1 << 1)	/* auto-reload enable */
+#define OMAP_TIMER_CTRL_ST		(1 << 0)	/* start timer */
+
+/* timer interrupt enable bits */
+#define OMAP_TIMER_INT_CAPTURE		(1 << 2)
+#define OMAP_TIMER_INT_OVERFLOW		(1 << 1)
+#define OMAP_TIMER_INT_MATCH		(1 << 0)
+
+
+struct omap_dm_timer {
+	struct list_head timer_list;
+
+	u32 base;
+	unsigned int irq;
+};
+
+u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg);
+void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value);
+
+struct omap_dm_timer * omap_dm_timer_request(void);
+void omap_dm_timer_free(struct omap_dm_timer *timer);
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+
+void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
+void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value);
+void omap_dm_timer_enable_compare(struct omap_dm_timer *timer);
+void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer);
+
+void omap_dm_timer_trigger(struct omap_dm_timer *timer);
+void omap_dm_timer_start(struct omap_dm_timer *timer);
+void omap_dm_timer_stop(struct omap_dm_timer *timer);
+
+void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load);
+void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match);
+
+unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
+void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
+
+unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
+void omap_dm_timer_reset_counter(struct omap_dm_timer *timer);
+
+int omap_dm_timers_active(void);
+
+#endif /* __ASM_ARCH_TIMER_H */
diff --git a/include/asm-arm/arch-omap/dsp.h b/include/asm-arm/arch-omap/dsp.h
new file mode 100644
index 00000000000..57bf4f39ca5
--- /dev/null
+++ b/include/asm-arm/arch-omap/dsp.h
@@ -0,0 +1,244 @@
+/*
+ * linux/include/asm-arm/arch-omap/dsp.h
+ *
+ * Header for OMAP DSP driver
+ *
+ * Copyright (C) 2002-2005 Nokia Corporation
+ *
+ * Written by Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * 2005/06/01:  DSP Gateway version 3.3
+ */
+
+#ifndef ASM_ARCH_DSP_H
+#define ASM_ARCH_DSP_H
+
+
+/*
+ * for /dev/dspctl/ctl
+ */
+#define OMAP_DSP_IOCTL_RESET			1
+#define OMAP_DSP_IOCTL_RUN			2
+#define OMAP_DSP_IOCTL_SETRSTVECT		3
+#define OMAP_DSP_IOCTL_CPU_IDLE			4
+#define OMAP_DSP_IOCTL_MPUI_WORDSWAP_ON		5
+#define OMAP_DSP_IOCTL_MPUI_WORDSWAP_OFF	6
+#define OMAP_DSP_IOCTL_MPUI_BYTESWAP_ON		7
+#define OMAP_DSP_IOCTL_MPUI_BYTESWAP_OFF	8
+#define OMAP_DSP_IOCTL_GBL_IDLE			9
+#define OMAP_DSP_IOCTL_DSPCFG			10
+#define OMAP_DSP_IOCTL_DSPUNCFG			11
+#define OMAP_DSP_IOCTL_TASKCNT			12
+#define OMAP_DSP_IOCTL_POLL			13
+#define OMAP_DSP_IOCTL_REGMEMR			40
+#define OMAP_DSP_IOCTL_REGMEMW			41
+#define OMAP_DSP_IOCTL_REGIOR			42
+#define OMAP_DSP_IOCTL_REGIOW			43
+#define OMAP_DSP_IOCTL_GETVAR			44
+#define OMAP_DSP_IOCTL_SETVAR			45
+#define OMAP_DSP_IOCTL_RUNLEVEL			50
+#define OMAP_DSP_IOCTL_SUSPEND			51
+#define OMAP_DSP_IOCTL_RESUME			52
+#define OMAP_DSP_IOCTL_FBEN			53
+#define OMAP_DSP_IOCTL_FBDIS			54
+#define OMAP_DSP_IOCTL_MBSEND			99
+
+/*
+ * for taskdev
+ * (ioctls below should be >= 0x10000)
+ */
+#define OMAP_DSP_TASK_IOCTL_BFLSH	0x10000
+#define OMAP_DSP_TASK_IOCTL_SETBSZ	0x10001
+#define OMAP_DSP_TASK_IOCTL_LOCK	0x10002
+#define OMAP_DSP_TASK_IOCTL_UNLOCK	0x10003
+#define OMAP_DSP_TASK_IOCTL_GETNAME	0x10004
+
+/*
+ * for /dev/dspctl/mem
+ */
+#define OMAP_DSP_MEM_IOCTL_EXMAP	1
+#define OMAP_DSP_MEM_IOCTL_EXUNMAP	2
+#define OMAP_DSP_MEM_IOCTL_EXMAP_FLUSH	3
+#define OMAP_DSP_MEM_IOCTL_FBEXPORT	5
+#define OMAP_DSP_MEM_IOCTL_MMUITACK	7
+#define OMAP_DSP_MEM_IOCTL_MMUINIT	9
+#define OMAP_DSP_MEM_IOCTL_KMEM_RESERVE	11
+#define OMAP_DSP_MEM_IOCTL_KMEM_RELEASE	12
+
+struct omap_dsp_mapinfo {
+	unsigned long dspadr;
+	unsigned long size;
+};
+
+/*
+ * for /dev/dspctl/twch
+ */
+#define OMAP_DSP_TWCH_IOCTL_MKDEV	1
+#define OMAP_DSP_TWCH_IOCTL_RMDEV	2
+#define OMAP_DSP_TWCH_IOCTL_TADD	11
+#define OMAP_DSP_TWCH_IOCTL_TDEL	12
+#define OMAP_DSP_TWCH_IOCTL_TKILL	13
+
+#define OMAP_DSP_DEVSTATE_NOTASK	0x00000001
+#define OMAP_DSP_DEVSTATE_ATTACHED	0x00000002
+#define OMAP_DSP_DEVSTATE_GARBAGE	0x00000004
+#define OMAP_DSP_DEVSTATE_INVALID	0x00000008
+#define OMAP_DSP_DEVSTATE_ADDREQ	0x00000100
+#define OMAP_DSP_DEVSTATE_DELREQ	0x00000200
+#define OMAP_DSP_DEVSTATE_ADDFAIL	0x00001000
+#define OMAP_DSP_DEVSTATE_ADDING	0x00010000
+#define OMAP_DSP_DEVSTATE_DELING	0x00020000
+#define OMAP_DSP_DEVSTATE_KILLING	0x00040000
+#define OMAP_DSP_DEVSTATE_STATE_MASK	0x7fffffff
+#define OMAP_DSP_DEVSTATE_STALE		0x80000000
+
+struct omap_dsp_taddinfo {
+	unsigned char minor;
+	unsigned long taskadr;
+};
+#define OMAP_DSP_TADD_ABORTADR	0xffffffff
+
+
+/*
+ * error cause definition (for error detection device)
+ */
+#define OMAP_DSP_ERRDT_WDT	0x00000001
+#define OMAP_DSP_ERRDT_MMU	0x00000002
+
+
+/*
+ * mailbox protocol definitions
+ */
+
+struct omap_dsp_mailbox_cmd {
+	unsigned short cmd;
+	unsigned short data;
+};
+
+struct omap_dsp_reginfo {
+	unsigned short adr;
+	unsigned short val;
+};
+
+struct omap_dsp_varinfo {
+	unsigned char varid;
+	unsigned short val[0];
+};
+
+#define OMAP_DSP_MBPROT_REVISION	0x0019
+
+#define OMAP_DSP_MBCMD_WDSND	0x10
+#define OMAP_DSP_MBCMD_WDREQ	0x11
+#define OMAP_DSP_MBCMD_BKSND	0x20
+#define OMAP_DSP_MBCMD_BKREQ	0x21
+#define OMAP_DSP_MBCMD_BKYLD	0x23
+#define OMAP_DSP_MBCMD_BKSNDP	0x24
+#define OMAP_DSP_MBCMD_BKREQP	0x25
+#define OMAP_DSP_MBCMD_TCTL	0x30
+#define OMAP_DSP_MBCMD_TCTLDATA	0x31
+#define OMAP_DSP_MBCMD_POLL	0x32
+#define OMAP_DSP_MBCMD_WDT	0x50	/* v3.3: obsolete */
+#define OMAP_DSP_MBCMD_RUNLEVEL	0x51
+#define OMAP_DSP_MBCMD_PM	0x52
+#define OMAP_DSP_MBCMD_SUSPEND	0x53
+#define OMAP_DSP_MBCMD_KFUNC	0x54
+#define OMAP_DSP_MBCMD_TCFG	0x60
+#define OMAP_DSP_MBCMD_TADD	0x62
+#define OMAP_DSP_MBCMD_TDEL	0x63
+#define OMAP_DSP_MBCMD_TSTOP	0x65
+#define OMAP_DSP_MBCMD_DSPCFG	0x70
+#define OMAP_DSP_MBCMD_REGRW	0x72
+#define OMAP_DSP_MBCMD_GETVAR	0x74
+#define OMAP_DSP_MBCMD_SETVAR	0x75
+#define OMAP_DSP_MBCMD_ERR	0x78
+#define OMAP_DSP_MBCMD_DBG	0x79
+
+#define OMAP_DSP_MBCMD_TCTL_TINIT	0x0000
+#define OMAP_DSP_MBCMD_TCTL_TEN		0x0001
+#define OMAP_DSP_MBCMD_TCTL_TDIS	0x0002
+#define OMAP_DSP_MBCMD_TCTL_TCLR	0x0003
+#define OMAP_DSP_MBCMD_TCTL_TCLR_FORCE	0x0004
+
+#define OMAP_DSP_MBCMD_RUNLEVEL_USER		0x01
+#define OMAP_DSP_MBCMD_RUNLEVEL_SUPER		0x0e
+#define OMAP_DSP_MBCMD_RUNLEVEL_RECOVERY	0x10
+
+#define OMAP_DSP_MBCMD_PM_DISABLE	0x00
+#define OMAP_DSP_MBCMD_PM_ENABLE	0x01
+
+#define OMAP_DSP_MBCMD_KFUNC_FBCTL	0x00
+
+#define OMAP_DSP_MBCMD_FBCTL_ENABLE	0x0002
+#define OMAP_DSP_MBCMD_FBCTL_DISABLE	0x0003
+
+#define OMAP_DSP_MBCMD_TDEL_SAFE	0x0000
+#define OMAP_DSP_MBCMD_TDEL_KILL	0x0001
+
+#define OMAP_DSP_MBCMD_DSPCFG_REQ	0x00
+#define OMAP_DSP_MBCMD_DSPCFG_SYSADRH	0x28
+#define OMAP_DSP_MBCMD_DSPCFG_SYSADRL	0x29
+#define OMAP_DSP_MBCMD_DSPCFG_PROTREV	0x70
+#define OMAP_DSP_MBCMD_DSPCFG_ABORT	0x78
+#define OMAP_DSP_MBCMD_DSPCFG_LAST	0x80
+
+#define OMAP_DSP_MBCMD_REGRW_MEMR	0x00
+#define OMAP_DSP_MBCMD_REGRW_MEMW	0x01
+#define OMAP_DSP_MBCMD_REGRW_IOR	0x02
+#define OMAP_DSP_MBCMD_REGRW_IOW	0x03
+#define OMAP_DSP_MBCMD_REGRW_DATA	0x04
+
+#define OMAP_DSP_MBCMD_VARID_ICRMASK	0x00
+#define OMAP_DSP_MBCMD_VARID_LOADINFO	0x01
+
+#define OMAP_DSP_TTYP_ARCV	0x0001
+#define OMAP_DSP_TTYP_ASND	0x0002
+#define OMAP_DSP_TTYP_BKMD	0x0004
+#define OMAP_DSP_TTYP_BKDM	0x0008
+#define OMAP_DSP_TTYP_PVMD	0x0010
+#define OMAP_DSP_TTYP_PVDM	0x0020
+
+#define OMAP_DSP_EID_BADTID	0x10
+#define OMAP_DSP_EID_BADTCN	0x11
+#define OMAP_DSP_EID_BADBID	0x20
+#define OMAP_DSP_EID_BADCNT	0x21
+#define OMAP_DSP_EID_NOTLOCKED	0x22
+#define OMAP_DSP_EID_STVBUF	0x23
+#define OMAP_DSP_EID_BADADR	0x24
+#define OMAP_DSP_EID_BADTCTL	0x30
+#define OMAP_DSP_EID_BADPARAM	0x50
+#define OMAP_DSP_EID_FATAL	0x58
+#define OMAP_DSP_EID_NOMEM	0xc0
+#define OMAP_DSP_EID_NORES	0xc1
+#define OMAP_DSP_EID_IPBFULL	0xc2
+#define OMAP_DSP_EID_WDT	0xd0
+#define OMAP_DSP_EID_TASKNOTRDY	0xe0
+#define OMAP_DSP_EID_TASKBSY	0xe1
+#define OMAP_DSP_EID_TASKERR	0xef
+#define OMAP_DSP_EID_BADCFGTYP	0xf0
+#define OMAP_DSP_EID_DEBUG	0xf8
+#define OMAP_DSP_EID_BADSEQ	0xfe
+#define OMAP_DSP_EID_BADCMD	0xff
+
+#define OMAP_DSP_TNM_LEN	16
+
+#define OMAP_DSP_TID_FREE	0xff
+#define OMAP_DSP_TID_ANON	0xfe
+
+#define OMAP_DSP_BID_NULL	0xffff
+#define OMAP_DSP_BID_PVT	0xfffe
+
+#endif /* ASM_ARCH_DSP_H */
diff --git a/include/asm-arm/arch-omap/dsp_common.h b/include/asm-arm/arch-omap/dsp_common.h
new file mode 100644
index 00000000000..4fcce694405
--- /dev/null
+++ b/include/asm-arm/arch-omap/dsp_common.h
@@ -0,0 +1,37 @@
+/*
+ * linux/include/asm-arm/arch-omap/dsp_common.h
+ *
+ * Header for OMAP DSP subsystem control
+ *
+ * Copyright (C) 2004,2005 Nokia Corporation
+ *
+ * Written by Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * 2005/06/03:  DSP Gateway version 3.3
+ */
+
+#ifndef ASM_ARCH_DSP_COMMON_H
+#define ASM_ARCH_DSP_COMMON_H
+
+void omap_dsp_pm_suspend(void);
+void omap_dsp_pm_resume(void);
+void omap_dsp_request_mpui(void);
+void omap_dsp_release_mpui(void);
+int omap_dsp_request_mem(void);
+int omap_dsp_release_mem(void);
+
+#endif /* ASM_ARCH_DSP_COMMON_H */
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
index 57b126889b9..0d29b9c56a9 100644
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ b/include/asm-arm/arch-omap/entry-macro.S
@@ -8,6 +8,8 @@
  * warranty of any kind, whether express or implied.
  */
 
+#if defined(CONFIG_ARCH_OMAP1)
+
  		.macro	disable_fiq
 		.endm
 
@@ -30,3 +32,29 @@
 1510:
 		.endm
 
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#include <asm/arch/omap24xx.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =VA_IC_BASE
+		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
+		cmp	\irqnr, #0x0
+		bne	2222f
+		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
+		cmp	\irqnr, #0x0
+		bne	2222f
+		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
+		cmp	\irqnr, #0x0
+2222:
+		ldrne	\irqnr, [\base, #IRQ_SIR_IRQ]
+
+		.endm
+
+		.macro	irq_prio_table
+		.endm
+
+#endif
diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h
index fad2fc93ee7..74cb2b93b70 100644
--- a/include/asm-arm/arch-omap/gpio.h
+++ b/include/asm-arm/arch-omap/gpio.h
@@ -3,7 +3,7 @@
  *
  * OMAP GPIO handling defines and functions
  *
- * Copyright (C) 2003 Nokia Corporation
+ * Copyright (C) 2003-2005 Nokia Corporation
  *
  * Written by Juha Yrjölä <juha.yrjola@nokia.com>
  *
@@ -30,7 +30,23 @@
 #include <asm/arch/irqs.h>
 #include <asm/io.h>
 
-#define OMAP_MPUIO_BASE			0xfffb5000
+#define OMAP_MPUIO_BASE			(void __iomem *)0xfffb5000
+
+#ifdef CONFIG_ARCH_OMAP730
+#define OMAP_MPUIO_INPUT_LATCH		0x00
+#define OMAP_MPUIO_OUTPUT		0x02
+#define OMAP_MPUIO_IO_CNTL		0x04
+#define OMAP_MPUIO_KBR_LATCH		0x08
+#define OMAP_MPUIO_KBC			0x0a
+#define OMAP_MPUIO_GPIO_EVENT_MODE	0x0c
+#define OMAP_MPUIO_GPIO_INT_EDGE	0x0e
+#define OMAP_MPUIO_KBD_INT		0x10
+#define OMAP_MPUIO_GPIO_INT		0x12
+#define OMAP_MPUIO_KBD_MASKIT		0x14
+#define OMAP_MPUIO_GPIO_MASKIT		0x16
+#define OMAP_MPUIO_GPIO_DEBOUNCING	0x18
+#define OMAP_MPUIO_LATCH		0x1a
+#else
 #define OMAP_MPUIO_INPUT_LATCH		0x00
 #define OMAP_MPUIO_OUTPUT		0x04
 #define OMAP_MPUIO_IO_CNTL		0x08
@@ -44,6 +60,7 @@
 #define OMAP_MPUIO_GPIO_MASKIT		0x2c
 #define OMAP_MPUIO_GPIO_DEBOUNCING	0x30
 #define OMAP_MPUIO_LATCH		0x34
+#endif
 
 #define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
 #define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
@@ -52,18 +69,11 @@
 				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
 				 IH_GPIO_BASE + ((nr) & 0x3f))
 
-/* For EDGECTRL */
-#define OMAP_GPIO_NO_EDGE	  0x00
-#define OMAP_GPIO_FALLING_EDGE	  0x01
-#define OMAP_GPIO_RISING_EDGE	  0x02
-#define OMAP_GPIO_BOTH_EDGES	  0x03
-
 extern int omap_gpio_init(void);	/* Call from board init only */
 extern int omap_request_gpio(int gpio);
 extern void omap_free_gpio(int gpio);
 extern void omap_set_gpio_direction(int gpio, int is_input);
 extern void omap_set_gpio_dataout(int gpio, int enable);
 extern int omap_get_gpio_datain(int gpio);
-extern void omap_set_gpio_edge_ctrl(int gpio, int edge);
 
 #endif
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
index 48258c7f654..60201e1dd6a 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -43,6 +43,7 @@
 #include <asm/arch/cpu.h>
 #endif
 #include <asm/arch/io.h>
+#include <asm/arch/serial.h>
 
 /*
  * ---------------------------------------------------------------------------
@@ -89,11 +90,12 @@
 /* DPLL control registers */
 #define DPLL_CTL		(0xfffecf00)
 
-/* DSP clock control */
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
 #define DSP_CONFIG_REG_BASE     (0xe1008000)
 #define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
 #define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
 #define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
 
 /*
  * ---------------------------------------------------------------------------
@@ -142,6 +144,13 @@
  * Interrupts
  * ---------------------------------------------------------------------------
  */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
 #define OMAP_IH1_BASE		0xfffecb00
 #define OMAP_IH2_BASE		0xfffe0000
 
@@ -170,6 +179,8 @@
 #define IRQ_ILR0_REG_OFFSET	0x1c
 #define IRQ_GMR_REG_OFFSET	0xa0
 
+#endif
+
 /*
  * ----------------------------------------------------------------------------
  * System control registers
@@ -260,32 +271,17 @@
 
 /*
  * ---------------------------------------------------------------------------
- * Serial ports
- * ---------------------------------------------------------------------------
- */
-#define OMAP_UART1_BASE		(unsigned char *)0xfffb0000
-#define OMAP_UART2_BASE		(unsigned char *)0xfffb0800
-#define OMAP_UART3_BASE		(unsigned char *)0xfffb9800
-#define OMAP_MAX_NR_PORTS	3
-#define OMAP1510_BASE_BAUD	(12000000/16)
-#define OMAP16XX_BASE_BAUD	(48000000/16)
-
-#define is_omap_port(p)	({int __ret = 0;			\
-			if (p == IO_ADDRESS(OMAP_UART1_BASE) ||	\
-			    p == IO_ADDRESS(OMAP_UART2_BASE) ||	\
-			    p == IO_ADDRESS(OMAP_UART3_BASE))	\
-				__ret = 1;			\
-			__ret;					\
-			})
-
-/*
- * ---------------------------------------------------------------------------
  * Processor specific defines
  * ---------------------------------------------------------------------------
  */
 
 #include "omap730.h"
 #include "omap1510.h"
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#include "omap24xx.h"
+#endif
+
 #include "omap16xx.h"
 
 /*
@@ -312,7 +308,6 @@
 
 #ifdef CONFIG_MACH_OMAP_H4
 #include "board-h4.h"
-#error "Support for H4 board not yet implemented."
 #endif
 
 #ifdef CONFIG_MACH_OMAP_OSK
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
index 1c8c9fcc766..11fbf629bf7 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/include/asm-arm/arch-omap/io.h
@@ -49,16 +49,24 @@
  * I/O mapping
  * ----------------------------------------------------------------------------
  */
-#define IO_PHYS			0xFFFB0000
-#define IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
-#define IO_VIRT			(IO_PHYS - IO_OFFSET)
-#define IO_SIZE			0x40000
-#define IO_ADDRESS(x)		((x) - IO_OFFSET)
 
-#define PCIO_BASE		0
+#if defined(CONFIG_ARCH_OMAP1)
+#define IO_PHYS		0xFFFB0000
+#define IO_OFFSET      -0x01000000	/* Virtual IO = 0xfefb0000 */
+#define IO_SIZE		0x40000
 
-#define io_p2v(x)               ((x) - IO_OFFSET)
-#define io_v2p(x)               ((x) + IO_OFFSET)
+#elif defined(CONFIG_ARCH_OMAP2)
+#define IO_PHYS		0x48000000	/* L4 peripherals; other stuff has to be mapped *
+					 * manually. */
+#define IO_OFFSET	0x90000000	/* Virtual IO = 0xd8000000 */
+#define IO_SIZE		0x08000000
+#endif
+
+#define IO_VIRT		(IO_PHYS + IO_OFFSET)
+#define IO_ADDRESS(x)	((x) + IO_OFFSET)
+#define PCIO_BASE	0
+#define io_p2v(x)	((x) + IO_OFFSET)
+#define io_v2p(x)	((x) - IO_OFFSET)
 
 #ifndef __ASSEMBLER__
 
@@ -96,6 +104,8 @@ typedef struct { volatile u32 offset[4096]; } __regbase32;
 					->offset[((vaddr)&4095)>>2]
 #define __REG32(paddr)		__REGV32(io_p2v(paddr))
 
+extern void omap_map_common_io(void);
+
 #else
 
 #define __REG8(paddr)		io_p2v(paddr)
diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
index 0d05a7c957d..74e108ccac1 100644
--- a/include/asm-arm/arch-omap/irqs.h
+++ b/include/asm-arm/arch-omap/irqs.h
@@ -135,7 +135,6 @@
 /*
  * OMAP-1510 specific IRQ numbers for interrupt handler 2
  */
-#define INT_1510_OS_32kHz_TIMER (22 + IH2_BASE)
 #define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
 
 /*
@@ -232,6 +231,11 @@
 #define INT_730_DMA_CH15	(62 + IH2_BASE)
 #define INT_730_NAND		(63 + IH2_BASE)
 
+#define INT_24XX_GPIO_BANK1	29
+#define INT_24XX_GPIO_BANK2	30
+#define INT_24XX_GPIO_BANK3	31
+#define INT_24XX_GPIO_BANK4	32
+
 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
  * 16 MPUIO lines */
 #define OMAP_MAX_GPIO_LINES	192
diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h
index f6b57dd846a..84f81e315a2 100644
--- a/include/asm-arm/arch-omap/memory.h
+++ b/include/asm-arm/arch-omap/memory.h
@@ -36,12 +36,11 @@
 /*
  * Physical DRAM offset.
  */
+#if defined(CONFIG_ARCH_OMAP1)
 #define PHYS_OFFSET		(0x10000000UL)
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET	(0x30000000UL)
+#elif defined(CONFIG_ARCH_OMAP2)
+#define PHYS_OFFSET		(0x80000000UL)
+#endif
 
 /*
  * Conversion between SDRAM and fake PCI bus, used by USB
@@ -64,6 +63,11 @@
  */
 #ifdef CONFIG_ARCH_OMAP1510
 
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET	(0x30000000UL)
+
 #define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
 #define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
 #define is_lbus_device(dev)	(cpu_is_omap1510() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
diff --git a/include/asm-arm/arch-omap/mtd-xip.h b/include/asm-arm/arch-omap/mtd-xip.h
new file mode 100644
index 00000000000..a73a28571fe
--- /dev/null
+++ b/include/asm-arm/arch-omap/mtd-xip.h
@@ -0,0 +1,61 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions.
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Author: Vladimir Barinov <vbarinov@ru.mvista.com>
+ *
+ * (c) 2005 MontaVista Software, Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2.  This program is
+ * licensed "as is" without any warranty of any kind, whether express or
+ * implied.
+ */
+
+#ifndef __ARCH_OMAP_MTD_XIP_H__
+#define __ARCH_OMAP_MTD_XIP_H__
+
+#include <asm/hardware.h>
+#define OMAP_MPU_TIMER_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER_OFFSET	0x100
+
+typedef struct {
+	u32 cntl;			/* CNTL_TIMER, R/W */
+	u32 load_tim;			/* LOAD_TIM,   W */
+	u32 read_tim;			/* READ_TIM,   R */
+} xip_omap_mpu_timer_regs_t;
+
+#define xip_omap_mpu_timer_base(n)					\
+((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+	(n)*OMAP_MPU_TIMER_OFFSET))
+
+static inline unsigned long xip_omap_mpu_timer_read(int nr)
+{
+	volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
+	return timer->read_tim;
+}
+
+#define xip_irqpending()	\
+	(omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
+#define xip_currtime()		(~xip_omap_mpu_timer_read(0))
+
+/*
+ * It's permitted to do approxmation for xip_elapsed_since macro
+ * (see linux/mtd/xip.h)
+ */
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
+#else
+#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
+#endif
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle()  asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
+
+#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
index 5bd3f0097fc..1b1ad410534 100644
--- a/include/asm-arm/arch-omap/mux.h
+++ b/include/asm-arm/arch-omap/mux.h
@@ -185,6 +185,7 @@ typedef enum {
 
 	/* MPUIO */
 	MPUIO2,
+	N15_1610_MPUIO2,
 	MPUIO4,
 	MPUIO5,
 	T20_1610_MPUIO5,
@@ -210,6 +211,7 @@ typedef enum {
 
 	/* Misc ballouts */
 	BALLOUT_V8_ARMIO3,
+	N20_HDQ,
 
 	/* OMAP-1610 MMC2 */
 	W8_1610_MMC2_DAT0,
@@ -235,6 +237,7 @@ typedef enum {
 	P20_1610_GPIO4,
 	V9_1610_GPIO7,
 	W8_1610_GPIO9,
+	N20_1610_GPIO11,
 	N19_1610_GPIO13,
 	P10_1610_GPIO22,
 	V5_1610_GPIO24,
@@ -250,7 +253,7 @@ typedef enum {
 	U18_1610_UWIRE_SDI,
 	W21_1610_UWIRE_SDO,
 	N14_1610_UWIRE_CS0,
-	P15_1610_UWIRE_CS0,
+	P15_1610_UWIRE_CS3,
 	N15_1610_UWIRE_CS1,
 
 	/* OMAP-1610 Flash */
@@ -411,7 +414,8 @@ MUX_CFG("N21_1710_GPIO14",       6,    9,    0,   1,   1,   1,    1,     1,  1)
 MUX_CFG("W15_1710_GPIO40",       9,   27,    7,   2,   5,   1,    2,     1,  1)
 
 /* MPUIO */
-MUX_CFG("MPUIO2",		 7,   18,    0,	  1,   1,   1,	 NA,	 0,  1)
+MUX_CFG("MPUIO2",		 7,   18,    0,	  1,  14,   1,	 NA,	 0,  1)
+MUX_CFG("N15_1610_MPUIO2",	 7,   18,    0,	  1,  14,   1,	  1,	 0,  1)
 MUX_CFG("MPUIO4",		 7,   15,    0,	  1,  13,   1,	 NA,	 0,  1)
 MUX_CFG("MPUIO5",		 7,   12,    0,	  1,  12,   1,	 NA,	 0,  1)
 
@@ -438,6 +442,7 @@ MUX_CFG("MCBSP3_CLKX",		 9,    3,    1,	  1,  29,   0,	 NA,	 0,  1)
 
 /* Misc ballouts */
 MUX_CFG("BALLOUT_V8_ARMIO3",	 B,   18,    0,	  2,  25,   1,	 NA,	 0,  1)
+MUX_CFG("N20_HDQ",	       6,   18,    1,   1,   4,   0,    1,     4,  0)
 
 /* OMAP-1610 MMC2 */
 MUX_CFG("W8_1610_MMC2_DAT0",	 B,   21,    6,	  2,  23,   1,	  2,	 1,  1)
@@ -463,6 +468,7 @@ MUX_CFG("J18_1610_ETM_D7",	 5,   27,    1,	  0,  19,   0,	  0,	 0,  1)
 MUX_CFG("P20_1610_GPIO4",	 6,   27,    0,	  1,   7,   0,	  1,	 1,  1)
 MUX_CFG("V9_1610_GPIO7",	 B,   12,    1,	  2,  20,   0,	  2,	 1,  1)
 MUX_CFG("W8_1610_GPIO9",	 B,   21,    0,	  2,  23,   0,	  2,	 1,  1)
+MUX_CFG("N20_1610_GPIO11",       6,   18,    0,   1,   4,   0,    1,     1,  1)
 MUX_CFG("N19_1610_GPIO13",	 6,   12,    0,	  1,   2,   0,	  1,	 1,  1)
 MUX_CFG("P10_1610_GPIO22",	 C,    0,    7,	  2,  26,   0,	  2,	 1,  1)
 MUX_CFG("V5_1610_GPIO24",	 B,   15,    7,	  2,  21,   0,	  2,	 1,  1)
diff --git a/include/asm-arm/arch-omap/omap1510.h b/include/asm-arm/arch-omap/omap1510.h
index f491a48ef2e..f086a393390 100644
--- a/include/asm-arm/arch-omap/omap1510.h
+++ b/include/asm-arm/arch-omap/omap1510.h
@@ -36,10 +36,6 @@
 
 /* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
 
-#define OMAP1510_SRAM_BASE	0xD0000000
-#define OMAP1510_SRAM_SIZE	(SZ_128K + SZ_64K)
-#define OMAP1510_SRAM_START	0x20000000
-
 #define OMAP1510_DSP_BASE	0xE0000000
 #define OMAP1510_DSP_SIZE	0x28000
 #define OMAP1510_DSP_START	0xE0000000
@@ -48,14 +44,5 @@
 #define OMAP1510_DSPREG_SIZE	SZ_128K
 #define OMAP1510_DSPREG_START	0xE1000000
 
-/*
- * ----------------------------------------------------------------------------
- * Memory used by power management
- * ----------------------------------------------------------------------------
- */
-
-#define OMAP1510_SRAM_IDLE_SUSPEND	(OMAP1510_SRAM_BASE + OMAP1510_SRAM_SIZE - 0x200)
-#define OMAP1510_SRAM_API_SUSPEND	(OMAP1510_SRAM_IDLE_SUSPEND + 0x100)
-
 #endif /*  __ASM_ARCH_OMAP1510_H */
 
diff --git a/include/asm-arm/arch-omap/omap16xx.h b/include/asm-arm/arch-omap/omap16xx.h
index 38a9b95e6a3..f0c7f0fb4dc 100644
--- a/include/asm-arm/arch-omap/omap16xx.h
+++ b/include/asm-arm/arch-omap/omap16xx.h
@@ -36,11 +36,6 @@
 
 /* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
 
-#define OMAP16XX_SRAM_BASE	0xD0000000
-#define OMAP1610_SRAM_SIZE	(SZ_16K)
-#define OMAP5912_SRAM_SIZE	0x3E800
-#define OMAP16XX_SRAM_START	0x20000000
-
 #define OMAP16XX_DSP_BASE	0xE0000000
 #define OMAP16XX_DSP_SIZE	0x28000
 #define OMAP16XX_DSP_START	0xE0000000
@@ -50,17 +45,6 @@
 #define OMAP16XX_DSPREG_START	0xE1000000
 
 /*
- * ----------------------------------------------------------------------------
- * Memory used by power management
- * ----------------------------------------------------------------------------
- */
-
-#define OMAP1610_SRAM_IDLE_SUSPEND	(OMAP16XX_SRAM_BASE + OMAP1610_SRAM_SIZE - 0x200)
-#define OMAP1610_SRAM_API_SUSPEND	(OMAP1610_SRAM_IDLE_SUSPEND + 0x100)
-#define OMAP5912_SRAM_IDLE_SUSPEND	(OMAP16XX_SRAM_BASE + OMAP5912_SRAM_SIZE - 0x200)
-#define OMAP5912_SRAM_API_SUSPEND	(OMAP5912_SRAM_IDLE_SUSPEND + 0x100)
-
-/*
  * ---------------------------------------------------------------------------
  * Interrupts
  * ---------------------------------------------------------------------------
diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h
new file mode 100644
index 00000000000..a9105466a41
--- /dev/null
+++ b/include/asm-arm/arch-omap/omap24xx.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_ARCH_OMAP24XX_H
+#define __ASM_ARCH_OMAP24XX_H
+
+#define OMAP24XX_L4_IO_BASE	0x48000000
+
+/* interrupt controller */
+#define OMAP24XX_IC_BASE	(OMAP24XX_L4_IO_BASE + 0xfe000)
+#define VA_IC_BASE		IO_ADDRESS(OMAP24XX_IC_BASE)
+
+#define OMAP24XX_IVA_INTC_BASE	0x40000000
+
+#define IRQ_SIR_IRQ		0x0040
+
+#endif /* __ASM_ARCH_OMAP24XX_H */
+
diff --git a/include/asm-arm/arch-omap/omap730.h b/include/asm-arm/arch-omap/omap730.h
index 599ab00f548..755b64c5e9f 100644
--- a/include/asm-arm/arch-omap/omap730.h
+++ b/include/asm-arm/arch-omap/omap730.h
@@ -36,10 +36,6 @@
 
 /* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
 
-#define OMAP730_SRAM_BASE	0xD0000000
-#define OMAP730_SRAM_SIZE	(SZ_128K + SZ_64K + SZ_8K)
-#define OMAP730_SRAM_START	0x20000000
-
 #define OMAP730_DSP_BASE	0xE0000000
 #define OMAP730_DSP_SIZE	0x50000
 #define OMAP730_DSP_START	0xE0000000
diff --git a/include/asm-arm/arch-omap/pm.h b/include/asm-arm/arch-omap/pm.h
index f209fc0953f..fbd742d0c49 100644
--- a/include/asm-arm/arch-omap/pm.h
+++ b/include/asm-arm/arch-omap/pm.h
@@ -61,7 +61,10 @@
 #define PER_EN				0x1
 
 #define CPU_SUSPEND_SIZE		200
-#define ULPD_LOW_POWER_EN		0x0001
+#define ULPD_LOW_PWR_EN			0x0001
+#define ULPD_DEEP_SLEEP_TRANSITION_EN	0x0010
+#define ULPD_SETUP_ANALOG_CELL_3_VAL	0
+#define ULPD_POWER_CTRL_REG_VAL		0x0219
 
 #define DSP_IDLE_DELAY			10
 #define DSP_IDLE			0x0040
@@ -86,46 +89,35 @@
 #define OMAP1510_BIG_SLEEP_REQUEST	0x0cc5
 #define OMAP1510_IDLE_LOOP_REQUEST	0x0c00
 #define OMAP1510_IDLE_CLOCK_DOMAINS	0x2
-#define OMAP1510_ULPD_LOW_POWER_REQ	0x0001
 
-#define OMAP1610_DEEP_SLEEP_REQUEST	0x17c7
-#define OMAP1610_BIG_SLEEP_REQUEST	TBD
+/* Both big sleep and deep sleep use same values. Difference is in ULPD. */
+#define OMAP1610_IDLECT1_SLEEP_VAL	0x13c7
+#define OMAP1610_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP1610_IDLECT3_VAL		0x3f
+#define OMAP1610_IDLECT3_SLEEP_ORMASK	0x2c
+#define OMAP1610_IDLECT3		0xfffece24
 #define OMAP1610_IDLE_LOOP_REQUEST	0x0400
-#define OMAP1610_IDLE_CLOCK_DOMAINS	0x09c7
-#define OMAP1610_ULPD_LOW_POWER_REQ	0x3
-
-#ifndef OMAP1510_SRAM_IDLE_SUSPEND
-#define OMAP1510_SRAM_IDLE_SUSPEND 0
-#endif
-#ifndef OMAP1610_SRAM_IDLE_SUSPEND
-#define OMAP1610_SRAM_IDLE_SUSPEND 0
-#endif
-#ifndef OMAP5912_SRAM_IDLE_SUSPEND
-#define OMAP5912_SRAM_IDLE_SUSPEND 0
-#endif
-
-#ifndef OMAP1510_SRAM_API_SUSPEND
-#define OMAP1510_SRAM_API_SUSPEND 0
-#endif
-#ifndef OMAP1610_SRAM_API_SUSPEND
-#define OMAP1610_SRAM_API_SUSPEND 0
-#endif
-#ifndef OMAP5912_SRAM_API_SUSPEND
-#define OMAP5912_SRAM_API_SUSPEND 0
-#endif
 
 #if     !defined(CONFIG_ARCH_OMAP1510) && \
-	!defined(CONFIG_ARCH_OMAP16XX)
+	!defined(CONFIG_ARCH_OMAP16XX) && \
+	!defined(CONFIG_ARCH_OMAP24XX)
 #error "Power management for this processor not implemented yet"
 #endif
 
 #ifndef __ASSEMBLER__
 extern void omap_pm_idle(void);
 extern void omap_pm_suspend(void);
-extern int omap1510_cpu_suspend(unsigned short, unsigned short);
-extern int omap1610_cpu_suspend(unsigned short, unsigned short);
-extern int omap1510_idle_loop_suspend(void);
-extern int omap1610_idle_loop_suspend(void);
+extern void omap1510_cpu_suspend(unsigned short, unsigned short);
+extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+extern void omap1510_idle_loop_suspend(void);
+extern void omap1610_idle_loop_suspend(void);
+
+#ifdef CONFIG_OMAP_SERIAL_WAKE
+extern void omap_serial_wake_trigger(int enable);
+#else
+#define omap_serial_wake_trigger(x)	{}
+#endif	/* CONFIG_OMAP_SERIAL_WAKE */
+
 extern unsigned int omap1510_cpu_suspend_sz;
 extern unsigned int omap1510_idle_loop_suspend_sz;
 extern unsigned int omap1610_cpu_suspend_sz;
@@ -161,6 +153,7 @@ enum arm_save_state {
 	ARM_SLEEP_SAVE_ARM_CKCTL,
 	ARM_SLEEP_SAVE_ARM_IDLECT1,
 	ARM_SLEEP_SAVE_ARM_IDLECT2,
+	ARM_SLEEP_SAVE_ARM_IDLECT3,
 	ARM_SLEEP_SAVE_ARM_EWUPCT,
 	ARM_SLEEP_SAVE_ARM_RSTCT1,
 	ARM_SLEEP_SAVE_ARM_RSTCT2,
diff --git a/include/asm-arm/arch-omap/serial.h b/include/asm-arm/arch-omap/serial.h
new file mode 100644
index 00000000000..79a5297af9f
--- /dev/null
+++ b/include/asm-arm/arch-omap/serial.h
@@ -0,0 +1,37 @@
+/*
+ *  linux/include/asm-arm/arch-omap/serial.h
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#if defined(CONFIG_ARCH_OMAP1)
+/* OMAP1 serial ports */
+#define OMAP_UART1_BASE		0xfffb0000
+#define OMAP_UART2_BASE		0xfffb0800
+#define OMAP_UART3_BASE		0xfffb9800
+#elif defined(CONFIG_ARCH_OMAP2)
+/* OMAP2 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x4806e000
+#endif
+
+#define OMAP_MAX_NR_PORTS	3
+#define OMAP1510_BASE_BAUD	(12000000/16)
+#define OMAP16XX_BASE_BAUD	(48000000/16)
+
+#define is_omap_port(p)	({int __ret = 0;			\
+			if (p == IO_ADDRESS(OMAP_UART1_BASE) ||	\
+			    p == IO_ADDRESS(OMAP_UART2_BASE) ||	\
+			    p == IO_ADDRESS(OMAP_UART3_BASE))	\
+				__ret = 1;			\
+			__ret;					\
+			})
+
+#endif
diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h
index 3e640aba8c2..3545c86859c 100644
--- a/include/asm-arm/arch-omap/uncompress.h
+++ b/include/asm-arm/arch-omap/uncompress.h
@@ -20,7 +20,7 @@
 #include <linux/config.h>
 #include <linux/types.h>
 #include <linux/serial_reg.h>
-#include <asm/arch/hardware.h>
+#include <asm/arch/serial.h>
 
 unsigned int system_rev;
 
@@ -34,8 +34,9 @@ static void
 putstr(const char *s)
 {
 	volatile u8 * uart = 0;
-	int shift;
+	int shift = 2;
 
+#ifdef CONFIG_ARCH_OMAP
 #ifdef	CONFIG_OMAP_LL_DEBUG_UART3
 	uart = (volatile u8 *)(OMAP_UART3_BASE);
 #elif	CONFIG_OMAP_LL_DEBUG_UART2
@@ -44,6 +45,7 @@ putstr(const char *s)
 	uart = (volatile u8 *)(OMAP_UART1_BASE);
 #endif
 
+#ifdef CONFIG_ARCH_OMAP1
 	/* Determine which serial port to use */
 	do {
 		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
@@ -51,14 +53,14 @@ putstr(const char *s)
 
 		if (omap_id == OMAP_ID_730)
 			shift = 0;
-		else
-			shift = 2;
 
 		if (check_port(uart, shift))
 			break;
 		/* Silent boot if no serial ports are enabled. */
 		return;
 	} while (0);
+#endif /* CONFIG_ARCH_OMAP1 */
+#endif
 
 	/*
 	 * Now, xmit each character