[PATCH] I2C: Add PXA I2C driver

Add support for the I2C PXA driver.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

1 files changed, 70 insertions, 0 deletions

diff --git a/include/asm-arm/arch-pxa/i2c.h b/include/asm-arm/arch-pxa/i2c.h
new file mode 100644
index 00000000000..46ec2243974
--- /dev/null
+++ b/include/asm-arm/arch-pxa/i2c.h
@@ -0,0 +1,70 @@
+/*
+ *  i2c_pxa.h
+ *
+ *  Copyright (C) 2002 Intrinsyc Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#ifndef _I2C_PXA_H_
+#define _I2C_PXA_H_
+
+#if 0
+#define DEF_TIMEOUT             3
+#else
+/* need a longer timeout if we're dealing with the fact we may well be
+ * looking at a multi-master environment
+*/
+#define DEF_TIMEOUT             32
+#endif
+
+#define BUS_ERROR               (-EREMOTEIO)
+#define XFER_NAKED              (-ECONNREFUSED)
+#define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
+
+/* ICR initialize bit values
+*
+*  15. FM       0 (100 Khz operation)
+*  14. UR       0 (No unit reset)
+*  13. SADIE    0 (Disables the unit from interrupting on slave addresses
+*                                       matching its slave address)
+*  12. ALDIE    0 (Disables the unit from interrupt when it loses arbitration
+*                                       in master mode)
+*  11. SSDIE    0 (Disables interrupts from a slave stop detected, in slave mode)
+*  10. BEIE     1 (Enable interrupts from detected bus errors, no ACK sent)
+*  9.  IRFIE    1 (Enable interrupts from full buffer received)
+*  8.  ITEIE    1 (Enables the I2C unit to interrupt when transmit buffer empty)
+*  7.  GCD      1 (Disables i2c unit response to general call messages as a slave)
+*  6.  IUE      0 (Disable unit until we change settings)
+*  5.  SCLE     1 (Enables the i2c clock output for master mode (drives SCL)
+*  4.  MA       0 (Only send stop with the ICR stop bit)
+*  3.  TB       0 (We are not transmitting a byte initially)
+*  2.  ACKNAK   0 (Send an ACK after the unit receives a byte)
+*  1.  STOP     0 (Do not send a STOP)
+*  0.  START    0 (Do not send a START)
+*
+*/
+#define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
+
+/* I2C status register init values
+ *
+ * 10. BED      1 (Clear bus error detected)
+ * 9.  SAD      1 (Clear slave address detected)
+ * 7.  IRF      1 (Clear IDBR Receive Full)
+ * 6.  ITE      1 (Clear IDBR Transmit Empty)
+ * 5.  ALD      1 (Clear Arbitration Loss Detected)
+ * 4.  SSD      1 (Clear Slave Stop Detected)
+ */
+#define I2C_ISR_INIT	0x7FF  /* status register init */
+
+struct i2c_slave_client;
+
+struct i2c_pxa_platform_data {
+	unsigned int		slave_addr;
+	struct i2c_slave_client	*slave;
+};
+
+extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
+#endif