Merge branch 'linus' into core/softlockup

Conflicts:

	kernel/softlockup.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 files changed, 593 insertions, 578 deletions

diff --git a/include/asm-arm/arch-pxa/audio.h b/include/asm-arm/arch-pxa/audio.h
index 52bbe3bc25e..f82f96dd105 100644
--- a/include/asm-arm/arch-pxa/audio.h
+++ b/include/asm-arm/arch-pxa/audio.h
@@ -12,4 +12,6 @@ typedef struct {
 	void *priv;
 } pxa2xx_audio_ops_t;
 
+extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
+
 #endif
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
index e25558faa5a..d9af6dabc89 100644
--- a/include/asm-arm/arch-pxa/hardware.h
+++ b/include/asm-arm/arch-pxa/hardware.h
@@ -192,15 +192,6 @@ extern int pxa_gpio_get_value(unsigned gpio);
 extern void pxa_gpio_set_value(unsigned gpio, int value);
 
 /*
- * Routine to enable or disable CKEN
- */
-static inline void __deprecated pxa_set_cken(int clock, int enable)
-{
-	extern void __pxa_set_cken(int clock, int enable);
-	__pxa_set_cken(clock, enable);
-}
-
-/*
  * return current memory and LCD clock frequency in units of 10kHz
  */
 extern unsigned int get_memclk_frequency_10khz(void);
diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h
index 99f4f423a8e..0a50c3c763d 100644
--- a/include/asm-arm/arch-pxa/irda.h
+++ b/include/asm-arm/arch-pxa/irda.h
@@ -16,4 +16,8 @@ struct pxaficp_platform_data {
 
 extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
 
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+void pxa2xx_transceiver_mode(struct device *dev, int mode);
+#endif
+
 #endif
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 4b2ea1e95c5..dce9308626b 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -600,418 +600,6 @@
 
 
 /*
- * USB Device Controller
- * PXA25x and PXA27x USB device controller registers are different.
- */
-#if defined(CONFIG_PXA25x)
-
-#define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
-#define UDC_RES2	__REG(0x40600008)  /* UDC Undocumented - Reserved2 */
-#define UDC_RES3	__REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
-
-#define UDCCR		__REG(0x40600000)  /* UDC Control Register */
-#define UDCCR_UDE	(1 << 0)	/* UDC enable */
-#define UDCCR_UDA	(1 << 1)	/* UDC active */
-#define UDCCR_RSM	(1 << 2)	/* Device resume */
-#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
-#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
-#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
-#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
-#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
-
-#define UDCCS0		__REG(0x40600010)  /* UDC Endpoint 0 Control/Status Register */
-#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
-#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
-#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
-#define UDCCS0_SST	(1 << 4)	/* Sent stall */
-#define UDCCS0_FST	(1 << 5)	/* Force stall */
-#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
-#define UDCCS0_SA	(1 << 7)	/* Setup active */
-
-/* Bulk IN - Endpoint 1,6,11 */
-#define UDCCS1		__REG(0x40600014)  /* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS6		__REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS11		__REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
-
-#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
-
-/* Bulk OUT - Endpoint 2,7,12 */
-#define UDCCS2		__REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS12		__REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
-
-#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
-
-/* Isochronous IN - Endpoint 3,8,13 */
-#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS13		__REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
-
-#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
-
-/* Isochronous OUT - Endpoint 4,9,14 */
-#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS14		__REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
-
-#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_IO_ROF	(1 << 2)	/* Receive overflow */
-#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
-
-/* Interrupt IN - Endpoint 5,10,15 */
-#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS15		__REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
-
-#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
-#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UFNRH		__REG(0x40600060)  /* UDC Frame Number Register High */
-#define UFNRL		__REG(0x40600064)  /* UDC Frame Number Register Low */
-#define UBCR2		__REG(0x40600068)  /* UDC Byte Count Reg 2 */
-#define UBCR4		__REG(0x4060006c)  /* UDC Byte Count Reg 4 */
-#define UBCR7		__REG(0x40600070)  /* UDC Byte Count Reg 7 */
-#define UBCR9		__REG(0x40600074)  /* UDC Byte Count Reg 9 */
-#define UBCR12		__REG(0x40600078)  /* UDC Byte Count Reg 12 */
-#define UBCR14		__REG(0x4060007c)  /* UDC Byte Count Reg 14 */
-#define UDDR0		__REG(0x40600080)  /* UDC Endpoint 0 Data Register */
-#define UDDR1		__REG(0x40600100)  /* UDC Endpoint 1 Data Register */
-#define UDDR2		__REG(0x40600180)  /* UDC Endpoint 2 Data Register */
-#define UDDR3		__REG(0x40600200)  /* UDC Endpoint 3 Data Register */
-#define UDDR4		__REG(0x40600400)  /* UDC Endpoint 4 Data Register */
-#define UDDR5		__REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
-#define UDDR6		__REG(0x40600600)  /* UDC Endpoint 6 Data Register */
-#define UDDR7		__REG(0x40600680)  /* UDC Endpoint 7 Data Register */
-#define UDDR8		__REG(0x40600700)  /* UDC Endpoint 8 Data Register */
-#define UDDR9		__REG(0x40600900)  /* UDC Endpoint 9 Data Register */
-#define UDDR10		__REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
-#define UDDR11		__REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
-#define UDDR12		__REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
-#define UDDR13		__REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
-#define UDDR14		__REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
-#define UDDR15		__REG(0x406000E0)  /* UDC Endpoint 15 Data Register */
-
-#define UICR0		__REG(0x40600050)  /* UDC Interrupt Control Register 0 */
-
-#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
-#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
-#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
-#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
-#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
-#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
-#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
-#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
-
-#define UICR1		__REG(0x40600054)  /* UDC Interrupt Control Register 1 */
-
-#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
-#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
-#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
-#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
-#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
-#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
-#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
-#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
-
-#define USIR0		__REG(0x40600058)  /* UDC Status Interrupt Register 0 */
-
-#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
-#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
-#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
-#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
-#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
-#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
-#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
-#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
-
-#define USIR1		__REG(0x4060005C)  /* UDC Status Interrupt Register 1 */
-
-#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
-#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
-#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
-#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
-#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
-#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
-#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
-#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
-
-#elif defined(CONFIG_PXA27x)
-
-#define UDCCR           __REG(0x40600000) /* UDC Control Register */
-#define UDCCR_OEN	(1 << 31)	/* On-the-Go Enable */
-#define UDCCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation
-					   Protocol Port Support */
-#define UDCCR_AHNP	(1 << 29)	/* A-device Host Negotiation Protocol
-					   Support */
-#define UDCCR_BHNP	(1 << 28)	/* B-device Host Negotiation Protocol
-					   Enable */
-#define UDCCR_DWRE	(1 << 16)	/* Device Remote Wake-up Enable */
-#define UDCCR_ACN	(0x03 << 11)	/* Active UDC configuration Number */
-#define UDCCR_ACN_S	11
-#define UDCCR_AIN	(0x07 << 8)	/* Active UDC interface Number */
-#define UDCCR_AIN_S	8
-#define UDCCR_AAISN	(0x07 << 5)	/* Active UDC Alternate Interface
-					   Setting Number */
-#define UDCCR_AAISN_S	5
-#define UDCCR_SMAC	(1 << 4)	/* Switch Endpoint Memory to Active
-					   Configuration */
-#define UDCCR_EMCE	(1 << 3)	/* Endpoint Memory Configuration
-					   Error */
-#define UDCCR_UDR	(1 << 2)	/* UDC Resume */
-#define UDCCR_UDA	(1 << 1)	/* UDC Active */
-#define UDCCR_UDE	(1 << 0)	/* UDC Enable */
-
-#define UDCICR0         __REG(0x40600004) /* UDC Interrupt Control Register0 */
-#define UDCICR1         __REG(0x40600008) /* UDC Interrupt Control Register1 */
-#define UDCICR_FIFOERR	(1 << 1)	/* FIFO Error interrupt for EP */
-#define UDCICR_PKTCOMPL (1 << 0)	/* Packet Complete interrupt for EP */
-
-#define UDC_INT_FIFOERROR  (0x2)
-#define UDC_INT_PACKETCMP  (0x1)
-
-#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCICR1_IECC	(1 << 31)	/* IntEn - Configuration Change */
-#define UDCICR1_IESOF	(1 << 30)	/* IntEn - Start of Frame */
-#define UDCICR1_IERU	(1 << 29)	/* IntEn - Resume */
-#define UDCICR1_IESU	(1 << 28)	/* IntEn - Suspend */
-#define UDCICR1_IERS	(1 << 27)	/* IntEn - Reset */
-
-#define UDCISR0         __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
-#define UDCISR1         __REG(0x40600010) /* UDC Interrupt Status Register 1 */
-#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
-#define UDCISR1_IRCC	(1 << 31)	/* IntReq - Configuration Change */
-#define UDCISR1_IRSOF	(1 << 30)	/* IntReq - Start of Frame */
-#define UDCISR1_IRRU	(1 << 29)	/* IntReq - Resume */
-#define UDCISR1_IRSU	(1 << 28)	/* IntReq - Suspend */
-#define UDCISR1_IRRS	(1 << 27)	/* IntReq - Reset */
-
-#define UDCFNR          __REG(0x40600014) /* UDC Frame Number Register */
-#define UDCOTGICR	__REG(0x40600018) /* UDC On-The-Go interrupt control */
-#define UDCOTGICR_IESF	(1 << 24)	/* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transciever Interrupt
-					   Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transciever Interrupt
-					   Falling Edge Interrupt Enable */
-#define UDCOTGICR_IEVV40R (1 << 9)	/* OTG Vbus Valid 4.0V Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEVV40F (1 << 8)	/* OTG Vbus Valid 4.0V Falling Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEVV44R (1 << 7)	/* OTG Vbus Valid 4.4V Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEVV44F (1 << 6)	/* OTG Vbus Valid 4.4V Falling Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IESVR	(1 << 5)	/* OTG Session Valid Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IESVF	(1 << 4)	/* OTG Session Valid Falling Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IESDR	(1 << 3)	/* OTG A-Device SRP Detect Rising
-					   Edge Interrupt Enable */
-#define UDCOTGICR_IESDF	(1 << 2)	/* OTG A-Device SRP Detect Falling
-					   Edge Interrupt Enable */
-#define UDCOTGICR_IEIDR	(1 << 1)	/* OTG ID Change Rising Edge
-					   Interrupt Enable */
-#define UDCOTGICR_IEIDF	(1 << 0)	/* OTG ID Change Falling Edge
-					   Interrupt Enable */
-
-#define UP2OCR		  __REG(0x40600020)  /* USB Port 2 Output Control register */
-
-#define UP2OCR_CPVEN	(1 << 0)	/* Charge Pump Vbus Enable */
-#define UP2OCR_CPVPE	(1 << 1)	/* Charge Pump Vbus Pulse Enable */
-#define UP2OCR_DPPDE	(1 << 2)	/* Host Port 2 Transceiver D+ Pull Down Enable */
-#define UP2OCR_DMPDE	(1 << 3)	/* Host Port 2 Transceiver D- Pull Down Enable */
-#define UP2OCR_DPPUE	(1 << 4)	/* Host Port 2 Transceiver D+ Pull Up Enable */
-#define UP2OCR_DMPUE	(1 << 5)	/* Host Port 2 Transceiver D- Pull Up Enable */
-#define UP2OCR_DPPUBE	(1 << 6)	/* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
-#define UP2OCR_DMPUBE	(1 << 7)	/* Host Port 2 Transceiver D- Pull Up Bypass Enable */
-#define UP2OCR_EXSP		(1 << 8)	/* External Transceiver Speed Control */
-#define UP2OCR_EXSUS	(1 << 9)	/* External Transceiver Speed Enable */
-#define UP2OCR_IDON		(1 << 10)	/* OTG ID Read Enable */
-#define UP2OCR_HXS		(1 << 16)	/* Host Port 2 Transceiver Output Select */
-#define UP2OCR_HXOE		(1 << 17)	/* Host Port 2 Transceiver Output Enable */
-#define UP2OCR_SEOS		(1 << 24)	/* Single-Ended Output Select */
-
-#define UDCCSN(x)	__REG2(0x40600100, (x) << 2)
-#define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
-#define UDCCSR0_SA	(1 << 7)	/* Setup Active */
-#define UDCCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
-#define UDCCSR0_FST	(1 << 5)	/* Force Stall */
-#define UDCCSR0_SST	(1 << 4)	/* Sent Stall */
-#define UDCCSR0_DME	(1 << 3)	/* DMA Enable */
-#define UDCCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
-#define UDCCSR0_IPR	(1 << 1)	/* IN Packet Ready */
-#define UDCCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
-
-#define UDCCSRA         __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
-#define UDCCSRB         __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
-#define UDCCSRC         __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
-#define UDCCSRD         __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
-#define UDCCSRE         __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
-#define UDCCSRF         __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
-#define UDCCSRG         __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
-#define UDCCSRH         __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
-#define UDCCSRI         __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
-#define UDCCSRJ         __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
-#define UDCCSRK         __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
-#define UDCCSRL         __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
-#define UDCCSRM         __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
-#define UDCCSRN         __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
-#define UDCCSRP         __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
-#define UDCCSRQ         __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
-#define UDCCSRR         __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
-#define UDCCSRS         __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
-#define UDCCSRT         __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
-#define UDCCSRU         __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
-#define UDCCSRV         __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
-#define UDCCSRW         __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
-#define UDCCSRX         __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
-
-#define UDCCSR_DPE	(1 << 9)	/* Data Packet Error */
-#define UDCCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
-#define UDCCSR_SP	(1 << 7)	/* Short Packet Control/Status */
-#define UDCCSR_BNE	(1 << 6)	/* Buffer Not Empty (IN endpoints) */
-#define UDCCSR_BNF	(1 << 6)	/* Buffer Not Full (OUT endpoints) */
-#define UDCCSR_FST	(1 << 5)	/* Force STALL */
-#define UDCCSR_SST	(1 << 4)	/* Sent STALL */
-#define UDCCSR_DME	(1 << 3)	/* DMA Enable */
-#define UDCCSR_TRN	(1 << 2)	/* Tx/Rx NAK */
-#define UDCCSR_PC	(1 << 1)	/* Packet Complete */
-#define UDCCSR_FS	(1 << 0)	/* FIFO needs service */
-
-#define UDCBCN(x)	__REG2(0x40600200, (x)<<2)
-#define UDCBCR0         __REG(0x40600200) /* Byte Count Register - EP0 */
-#define UDCBCRA         __REG(0x40600204) /* Byte Count Register - EPA */
-#define UDCBCRB         __REG(0x40600208) /* Byte Count Register - EPB */
-#define UDCBCRC         __REG(0x4060020C) /* Byte Count Register - EPC */
-#define UDCBCRD         __REG(0x40600210) /* Byte Count Register - EPD */
-#define UDCBCRE         __REG(0x40600214) /* Byte Count Register - EPE */
-#define UDCBCRF         __REG(0x40600218) /* Byte Count Register - EPF */
-#define UDCBCRG         __REG(0x4060021C) /* Byte Count Register - EPG */
-#define UDCBCRH         __REG(0x40600220) /* Byte Count Register - EPH */
-#define UDCBCRI         __REG(0x40600224) /* Byte Count Register - EPI */
-#define UDCBCRJ         __REG(0x40600228) /* Byte Count Register - EPJ */
-#define UDCBCRK         __REG(0x4060022C) /* Byte Count Register - EPK */
-#define UDCBCRL         __REG(0x40600230) /* Byte Count Register - EPL */
-#define UDCBCRM         __REG(0x40600234) /* Byte Count Register - EPM */
-#define UDCBCRN         __REG(0x40600238) /* Byte Count Register - EPN */
-#define UDCBCRP         __REG(0x4060023C) /* Byte Count Register - EPP */
-#define UDCBCRQ         __REG(0x40600240) /* Byte Count Register - EPQ */
-#define UDCBCRR         __REG(0x40600244) /* Byte Count Register - EPR */
-#define UDCBCRS         __REG(0x40600248) /* Byte Count Register - EPS */
-#define UDCBCRT         __REG(0x4060024C) /* Byte Count Register - EPT */
-#define UDCBCRU         __REG(0x40600250) /* Byte Count Register - EPU */
-#define UDCBCRV         __REG(0x40600254) /* Byte Count Register - EPV */
-#define UDCBCRW         __REG(0x40600258) /* Byte Count Register - EPW */
-#define UDCBCRX         __REG(0x4060025C) /* Byte Count Register - EPX */
-
-#define UDCDN(x)	__REG2(0x40600300, (x)<<2)
-#define PHYS_UDCDN(x)	(0x40600300 + ((x)<<2))
-#define PUDCDN(x)	(volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
-#define UDCDR0          __REG(0x40600300) /* Data Register - EP0 */
-#define UDCDRA          __REG(0x40600304) /* Data Register - EPA */
-#define UDCDRB          __REG(0x40600308) /* Data Register - EPB */
-#define UDCDRC          __REG(0x4060030C) /* Data Register - EPC */
-#define UDCDRD          __REG(0x40600310) /* Data Register - EPD */
-#define UDCDRE          __REG(0x40600314) /* Data Register - EPE */
-#define UDCDRF          __REG(0x40600318) /* Data Register - EPF */
-#define UDCDRG          __REG(0x4060031C) /* Data Register - EPG */
-#define UDCDRH          __REG(0x40600320) /* Data Register - EPH */
-#define UDCDRI          __REG(0x40600324) /* Data Register - EPI */
-#define UDCDRJ          __REG(0x40600328) /* Data Register - EPJ */
-#define UDCDRK          __REG(0x4060032C) /* Data Register - EPK */
-#define UDCDRL          __REG(0x40600330) /* Data Register - EPL */
-#define UDCDRM          __REG(0x40600334) /* Data Register - EPM */
-#define UDCDRN          __REG(0x40600338) /* Data Register - EPN */
-#define UDCDRP          __REG(0x4060033C) /* Data Register - EPP */
-#define UDCDRQ          __REG(0x40600340) /* Data Register - EPQ */
-#define UDCDRR          __REG(0x40600344) /* Data Register - EPR */
-#define UDCDRS          __REG(0x40600348) /* Data Register - EPS */
-#define UDCDRT          __REG(0x4060034C) /* Data Register - EPT */
-#define UDCDRU          __REG(0x40600350) /* Data Register - EPU */
-#define UDCDRV          __REG(0x40600354) /* Data Register - EPV */
-#define UDCDRW          __REG(0x40600358) /* Data Register - EPW */
-#define UDCDRX          __REG(0x4060035C) /* Data Register - EPX */
-
-#define UDCCN(x)       __REG2(0x40600400, (x)<<2)
-#define UDCCRA          __REG(0x40600404) /* Configuration register EPA */
-#define UDCCRB          __REG(0x40600408) /* Configuration register EPB */
-#define UDCCRC          __REG(0x4060040C) /* Configuration register EPC */
-#define UDCCRD          __REG(0x40600410) /* Configuration register EPD */
-#define UDCCRE          __REG(0x40600414) /* Configuration register EPE */
-#define UDCCRF          __REG(0x40600418) /* Configuration register EPF */
-#define UDCCRG          __REG(0x4060041C) /* Configuration register EPG */
-#define UDCCRH          __REG(0x40600420) /* Configuration register EPH */
-#define UDCCRI          __REG(0x40600424) /* Configuration register EPI */
-#define UDCCRJ          __REG(0x40600428) /* Configuration register EPJ */
-#define UDCCRK          __REG(0x4060042C) /* Configuration register EPK */
-#define UDCCRL          __REG(0x40600430) /* Configuration register EPL */
-#define UDCCRM          __REG(0x40600434) /* Configuration register EPM */
-#define UDCCRN          __REG(0x40600438) /* Configuration register EPN */
-#define UDCCRP          __REG(0x4060043C) /* Configuration register EPP */
-#define UDCCRQ          __REG(0x40600440) /* Configuration register EPQ */
-#define UDCCRR          __REG(0x40600444) /* Configuration register EPR */
-#define UDCCRS          __REG(0x40600448) /* Configuration register EPS */
-#define UDCCRT          __REG(0x4060044C) /* Configuration register EPT */
-#define UDCCRU          __REG(0x40600450) /* Configuration register EPU */
-#define UDCCRV          __REG(0x40600454) /* Configuration register EPV */
-#define UDCCRW          __REG(0x40600458) /* Configuration register EPW */
-#define UDCCRX          __REG(0x4060045C) /* Configuration register EPX */
-
-#define UDCCONR_CN	(0x03 << 25)	/* Configuration Number */
-#define UDCCONR_CN_S	(25)
-#define UDCCONR_IN	(0x07 << 22)	/* Interface Number */
-#define UDCCONR_IN_S	(22)
-#define UDCCONR_AISN	(0x07 << 19)	/* Alternate Interface Number */
-#define UDCCONR_AISN_S	(19)
-#define UDCCONR_EN	(0x0f << 15)	/* Endpoint Number */
-#define UDCCONR_EN_S	(15)
-#define UDCCONR_ET	(0x03 << 13)	/* Endpoint Type: */
-#define UDCCONR_ET_S	(13)
-#define UDCCONR_ET_INT	(0x03 << 13)	/*   Interrupt */
-#define UDCCONR_ET_BULK	(0x02 << 13)	/*   Bulk */
-#define UDCCONR_ET_ISO	(0x01 << 13)	/*   Isochronous */
-#define UDCCONR_ET_NU	(0x00 << 13)	/*   Not used */
-#define UDCCONR_ED	(1 << 12)	/* Endpoint Direction */
-#define UDCCONR_MPS	(0x3ff << 2)	/* Maximum Packet Size */
-#define UDCCONR_MPS_S	(2)
-#define UDCCONR_DE	(1 << 1)	/* Double Buffering Enable */
-#define UDCCONR_EE	(1 << 0)	/* Endpoint Enable */
-
-
-#define UDC_INT_FIFOERROR  (0x2)
-#define UDC_INT_PACKETCMP  (0x1)
-
-#define UDC_FNR_MASK     (0x7ff)
-
-#define UDCCSR_WR_MASK   (UDCCSR_DME|UDCCSR_FST)
-#define UDC_BCR_MASK    (0x3ff)
-#endif
-
-/*
  * Fast Infrared Communication Port
  */
 
@@ -1237,120 +825,9 @@
 #endif
 
 /*
- * Power Manager
+ * Power Manager - see pxa2xx-regs.h
  */
 
-#define PMCR		__REG(0x40F00000)  /* Power Manager Control Register */
-#define PSSR		__REG(0x40F00004)  /* Power Manager Sleep Status Register */
-#define PSPR		__REG(0x40F00008)  /* Power Manager Scratch Pad Register */
-#define PWER		__REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
-#define PRER		__REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
-#define PFER		__REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
-#define PEDR		__REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
-#define PCFR		__REG(0x40F0001C)  /* Power Manager General Configuration Register */
-#define PGSR0		__REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
-#define PGSR1		__REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
-#define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
-#define PGSR3		__REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
-#define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */
-
-#define PSLR		__REG(0x40F00034)	/* Power Manager Sleep Config Register */
-#define PSTR		__REG(0x40F00038)	/*Power Manager Standby Config Register */
-#define PSNR		__REG(0x40F0003C)	/*Power Manager Sense Config Register */
-#define PVCR		__REG(0x40F00040)	/*Power Manager VoltageControl Register */
-#define PKWR		__REG(0x40F00050)	/* Power Manager KB Wake-up Enable Reg */
-#define PKSR		__REG(0x40F00054)	/* Power Manager KB Level-Detect Register */
-#define PCMD(x)	__REG2(0x40F00080, (x)<<2)
-#define PCMD0	__REG(0x40F00080 + 0 * 4)
-#define PCMD1	__REG(0x40F00080 + 1 * 4)
-#define PCMD2	__REG(0x40F00080 + 2 * 4)
-#define PCMD3	__REG(0x40F00080 + 3 * 4)
-#define PCMD4	__REG(0x40F00080 + 4 * 4)
-#define PCMD5	__REG(0x40F00080 + 5 * 4)
-#define PCMD6	__REG(0x40F00080 + 6 * 4)
-#define PCMD7	__REG(0x40F00080 + 7 * 4)
-#define PCMD8	__REG(0x40F00080 + 8 * 4)
-#define PCMD9	__REG(0x40F00080 + 9 * 4)
-#define PCMD10	__REG(0x40F00080 + 10 * 4)
-#define PCMD11	__REG(0x40F00080 + 11 * 4)
-#define PCMD12	__REG(0x40F00080 + 12 * 4)
-#define PCMD13	__REG(0x40F00080 + 13 * 4)
-#define PCMD14	__REG(0x40F00080 + 14 * 4)
-#define PCMD15	__REG(0x40F00080 + 15 * 4)
-#define PCMD16	__REG(0x40F00080 + 16 * 4)
-#define PCMD17	__REG(0x40F00080 + 17 * 4)
-#define PCMD18	__REG(0x40F00080 + 18 * 4)
-#define PCMD19	__REG(0x40F00080 + 19 * 4)
-#define PCMD20	__REG(0x40F00080 + 20 * 4)
-#define PCMD21	__REG(0x40F00080 + 21 * 4)
-#define PCMD22	__REG(0x40F00080 + 22 * 4)
-#define PCMD23	__REG(0x40F00080 + 23 * 4)
-#define PCMD24	__REG(0x40F00080 + 24 * 4)
-#define PCMD25	__REG(0x40F00080 + 25 * 4)
-#define PCMD26	__REG(0x40F00080 + 26 * 4)
-#define PCMD27	__REG(0x40F00080 + 27 * 4)
-#define PCMD28	__REG(0x40F00080 + 28 * 4)
-#define PCMD29	__REG(0x40F00080 + 29 * 4)
-#define PCMD30	__REG(0x40F00080 + 30 * 4)
-#define PCMD31	__REG(0x40F00080 + 31 * 4)
-
-#define PCMD_MBC	(1<<12)
-#define PCMD_DCE	(1<<11)
-#define PCMD_LC	(1<<10)
-/* FIXME:  PCMD_SQC need be checked.   */
-#define PCMD_SQC	(3<<8)	/* currently only bit 8 is changeable,
-				   bit 9 should be 0 all day. */
-#define PVCR_VCSA	(0x1<<14)
-#define PVCR_CommandDelay (0xf80)
-#define PCFR_PI2C_EN	(0x1 << 6)
-
-#define PSSR_OTGPH	(1 << 6)	/* OTG Peripheral control Hold */
-#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
-#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
-#define PSSR_STS	(1 << 3)	/* Standby Mode Status */
-#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
-#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
-#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
-
-#define PSLR_SL_ROD	(1 << 20)	/* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
-
-#define PCFR_RO		(1 << 15)	/* RDH Override */
-#define PCFR_PO		(1 << 14)	/* PH Override */
-#define PCFR_GPROD	(1 << 12)	/* GPIO nRESET_OUT Disable */
-#define PCFR_L1_EN	(1 << 11)	/* Sleep Mode L1 converter Enable */
-#define PCFR_FVC	(1 << 10)	/* Frequency/Voltage Change */
-#define PCFR_DC_EN	(1 << 7)	/* Sleep/deep-sleep DC-DC Converter Enable */
-#define PCFR_PI2CEN	(1 << 6)	/* Enable PI2C controller */
-#define PCFR_GPR_EN	(1 << 4)	/* nRESET_GPIO Pin Enable */
-#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
-#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
-#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
-#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */
-
-#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
-#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
-#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
-#define RCSR_HWR	(1 << 0)	/* Hardware Reset */
-
-#define PWER_GPIO(Nb)	(1 << Nb)	/* GPIO [0..15] wake-up enable     */
-#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
-#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
-#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
-#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
-#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
-#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
-#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
-#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
-#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
-#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
-#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
-#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
-#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
-#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
-#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
-#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
-#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
-
 /*
  * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h
  */
@@ -1360,52 +837,9 @@
  */
 
 /*
- * Core Clock
+ * Core Clock - see include/asm-arm/arch-pxa/pxa2xx-regs.h
  */
 
-#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
-#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
-#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
-#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
-
-#define CCCR_N_MASK	0x0380		/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#define CCCR_M_MASK	0x0060		/* Memory Frequency to Run Mode Frequency Multiplier */
-#define CCCR_L_MASK	0x001f		/* Crystal Frequency to Memory Frequency Multiplier */
-
-#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
-#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
-#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
-#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
-#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
-#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
-#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
-#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
-#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
-#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
-#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
-#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
-#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
-#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
-#define CKEN_USB	(11)	/* USB Unit Clock Enable */
-#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
-#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
-#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
-#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
-#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
-#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
-#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
-#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
-#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
-#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
-#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
-#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
-#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
-#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
-#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
-
-#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
-#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
-
 #ifdef CONFIG_PXA27x
 
 /* Camera Interface */
diff --git a/include/asm-arm/arch-pxa/pxa25x-udc.h b/include/asm-arm/arch-pxa/pxa25x-udc.h
new file mode 100644
index 00000000000..840305916b6
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pxa25x-udc.h
@@ -0,0 +1,163 @@
+#ifndef _ASM_ARCH_PXA25X_UDC_H
+#define _ASM_ARCH_PXA25X_UDC_H
+
+#ifdef _ASM_ARCH_PXA27X_UDC_H
+#error You can't include both PXA25x and PXA27x UDC support
+#endif
+
+#define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
+#define UDC_RES2	__REG(0x40600008)  /* UDC Undocumented - Reserved2 */
+#define UDC_RES3	__REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
+
+#define UDCCR		__REG(0x40600000)  /* UDC Control Register */
+#define UDCCR_UDE	(1 << 0)	/* UDC enable */
+#define UDCCR_UDA	(1 << 1)	/* UDC active */
+#define UDCCR_RSM	(1 << 2)	/* Device resume */
+#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
+#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
+#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
+#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
+
+#define UDCCS0		__REG(0x40600010)  /* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
+#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
+#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
+#define UDCCS0_SST	(1 << 4)	/* Sent stall */
+#define UDCCS0_FST	(1 << 5)	/* Force stall */
+#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
+#define UDCCS0_SA	(1 << 7)	/* Setup active */
+
+/* Bulk IN - Endpoint 1,6,11 */
+#define UDCCS1		__REG(0x40600014)  /* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS6		__REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS11		__REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
+
+#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Bulk OUT - Endpoint 2,7,12 */
+#define UDCCS2		__REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS12		__REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
+
+#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Isochronous IN - Endpoint 3,8,13 */
+#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS13		__REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
+
+#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Isochronous OUT - Endpoint 4,9,14 */
+#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS14		__REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
+
+#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_IO_ROF	(1 << 2)	/* Receive overflow */
+#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Interrupt IN - Endpoint 5,10,15 */
+#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS15		__REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+
+#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
+#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UFNRH		__REG(0x40600060)  /* UDC Frame Number Register High */
+#define UFNRL		__REG(0x40600064)  /* UDC Frame Number Register Low */
+#define UBCR2		__REG(0x40600068)  /* UDC Byte Count Reg 2 */
+#define UBCR4		__REG(0x4060006c)  /* UDC Byte Count Reg 4 */
+#define UBCR7		__REG(0x40600070)  /* UDC Byte Count Reg 7 */
+#define UBCR9		__REG(0x40600074)  /* UDC Byte Count Reg 9 */
+#define UBCR12		__REG(0x40600078)  /* UDC Byte Count Reg 12 */
+#define UBCR14		__REG(0x4060007c)  /* UDC Byte Count Reg 14 */
+#define UDDR0		__REG(0x40600080)  /* UDC Endpoint 0 Data Register */
+#define UDDR1		__REG(0x40600100)  /* UDC Endpoint 1 Data Register */
+#define UDDR2		__REG(0x40600180)  /* UDC Endpoint 2 Data Register */
+#define UDDR3		__REG(0x40600200)  /* UDC Endpoint 3 Data Register */
+#define UDDR4		__REG(0x40600400)  /* UDC Endpoint 4 Data Register */
+#define UDDR5		__REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
+#define UDDR6		__REG(0x40600600)  /* UDC Endpoint 6 Data Register */
+#define UDDR7		__REG(0x40600680)  /* UDC Endpoint 7 Data Register */
+#define UDDR8		__REG(0x40600700)  /* UDC Endpoint 8 Data Register */
+#define UDDR9		__REG(0x40600900)  /* UDC Endpoint 9 Data Register */
+#define UDDR10		__REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
+#define UDDR11		__REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
+#define UDDR12		__REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
+#define UDDR13		__REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
+#define UDDR14		__REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
+#define UDDR15		__REG(0x406000E0)  /* UDC Endpoint 15 Data Register */
+
+#define UICR0		__REG(0x40600050)  /* UDC Interrupt Control Register 0 */
+
+#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
+#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
+#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
+#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
+#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
+#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
+#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
+#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
+
+#define UICR1		__REG(0x40600054)  /* UDC Interrupt Control Register 1 */
+
+#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
+#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
+#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
+#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
+#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
+#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
+#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
+#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
+
+#define USIR0		__REG(0x40600058)  /* UDC Status Interrupt Register 0 */
+
+#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
+#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
+#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
+
+#define USIR1		__REG(0x4060005C)  /* UDC Status Interrupt Register 1 */
+
+#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/include/asm-arm/arch-pxa/pxa27x-udc.h
new file mode 100644
index 00000000000..bc1cf7d0773
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pxa27x-udc.h
@@ -0,0 +1,257 @@
+#ifndef _ASM_ARCH_PXA27X_UDC_H
+#define _ASM_ARCH_PXA27X_UDC_H
+
+#ifdef _ASM_ARCH_PXA25X_UDC_H
+#error You cannot include both PXA25x and PXA27x UDC support
+#endif
+
+#define UDCCR           __REG(0x40600000) /* UDC Control Register */
+#define UDCCR_OEN	(1 << 31)	/* On-the-Go Enable */
+#define UDCCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation
+					   Protocol Port Support */
+#define UDCCR_AHNP	(1 << 29)	/* A-device Host Negotiation Protocol
+					   Support */
+#define UDCCR_BHNP	(1 << 28)	/* B-device Host Negotiation Protocol
+					   Enable */
+#define UDCCR_DWRE	(1 << 16)	/* Device Remote Wake-up Enable */
+#define UDCCR_ACN	(0x03 << 11)	/* Active UDC configuration Number */
+#define UDCCR_ACN_S	11
+#define UDCCR_AIN	(0x07 << 8)	/* Active UDC interface Number */
+#define UDCCR_AIN_S	8
+#define UDCCR_AAISN	(0x07 << 5)	/* Active UDC Alternate Interface
+					   Setting Number */
+#define UDCCR_AAISN_S	5
+#define UDCCR_SMAC	(1 << 4)	/* Switch Endpoint Memory to Active
+					   Configuration */
+#define UDCCR_EMCE	(1 << 3)	/* Endpoint Memory Configuration
+					   Error */
+#define UDCCR_UDR	(1 << 2)	/* UDC Resume */
+#define UDCCR_UDA	(1 << 1)	/* UDC Active */
+#define UDCCR_UDE	(1 << 0)	/* UDC Enable */
+
+#define UDCICR0         __REG(0x40600004) /* UDC Interrupt Control Register0 */
+#define UDCICR1         __REG(0x40600008) /* UDC Interrupt Control Register1 */
+#define UDCICR_FIFOERR	(1 << 1)	/* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL (1 << 0)	/* Packet Complete interrupt for EP */
+
+#define UDC_INT_FIFOERROR  (0x2)
+#define UDC_INT_PACKETCMP  (0x1)
+
+#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC	(1 << 31)	/* IntEn - Configuration Change */
+#define UDCICR1_IESOF	(1 << 30)	/* IntEn - Start of Frame */
+#define UDCICR1_IERU	(1 << 29)	/* IntEn - Resume */
+#define UDCICR1_IESU	(1 << 28)	/* IntEn - Suspend */
+#define UDCICR1_IERS	(1 << 27)	/* IntEn - Reset */
+
+#define UDCISR0         __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
+#define UDCISR1         __REG(0x40600010) /* UDC Interrupt Status Register 1 */
+#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IRCC	(1 << 31)	/* IntReq - Configuration Change */
+#define UDCISR1_IRSOF	(1 << 30)	/* IntReq - Start of Frame */
+#define UDCISR1_IRRU	(1 << 29)	/* IntReq - Resume */
+#define UDCISR1_IRSU	(1 << 28)	/* IntReq - Suspend */
+#define UDCISR1_IRRS	(1 << 27)	/* IntReq - Reset */
+
+#define UDCFNR          __REG(0x40600014) /* UDC Frame Number Register */
+#define UDCOTGICR	__REG(0x40600018) /* UDC On-The-Go interrupt control */
+#define UDCOTGICR_IESF	(1 << 24)	/* OTG SET_FEATURE command recvd */
+#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transciever Interrupt
+					   Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transciever Interrupt
+					   Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R (1 << 9)	/* OTG Vbus Valid 4.0V Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV40F (1 << 8)	/* OTG Vbus Valid 4.0V Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV44R (1 << 7)	/* OTG Vbus Valid 4.4V Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV44F (1 << 6)	/* OTG Vbus Valid 4.4V Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESVR	(1 << 5)	/* OTG Session Valid Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESVF	(1 << 4)	/* OTG Session Valid Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESDR	(1 << 3)	/* OTG A-Device SRP Detect Rising
+					   Edge Interrupt Enable */
+#define UDCOTGICR_IESDF	(1 << 2)	/* OTG A-Device SRP Detect Falling
+					   Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR	(1 << 1)	/* OTG ID Change Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEIDF	(1 << 0)	/* OTG ID Change Falling Edge
+					   Interrupt Enable */
+
+#define UP2OCR		  __REG(0x40600020)  /* USB Port 2 Output Control register */
+#define UP3OCR		  __REG(0x40600024)  /* USB Port 2 Output Control register */
+
+#define UP2OCR_CPVEN	(1 << 0)	/* Charge Pump Vbus Enable */
+#define UP2OCR_CPVPE	(1 << 1)	/* Charge Pump Vbus Pulse Enable */
+#define UP2OCR_DPPDE	(1 << 2)	/* Host Port 2 Transceiver D+ Pull Down Enable */
+#define UP2OCR_DMPDE	(1 << 3)	/* Host Port 2 Transceiver D- Pull Down Enable */
+#define UP2OCR_DPPUE	(1 << 4)	/* Host Port 2 Transceiver D+ Pull Up Enable */
+#define UP2OCR_DMPUE	(1 << 5)	/* Host Port 2 Transceiver D- Pull Up Enable */
+#define UP2OCR_DPPUBE	(1 << 6)	/* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
+#define UP2OCR_DMPUBE	(1 << 7)	/* Host Port 2 Transceiver D- Pull Up Bypass Enable */
+#define UP2OCR_EXSP		(1 << 8)	/* External Transceiver Speed Control */
+#define UP2OCR_EXSUS	(1 << 9)	/* External Transceiver Speed Enable */
+#define UP2OCR_IDON		(1 << 10)	/* OTG ID Read Enable */
+#define UP2OCR_HXS		(1 << 16)	/* Host Port 2 Transceiver Output Select */
+#define UP2OCR_HXOE		(1 << 17)	/* Host Port 2 Transceiver Output Enable */
+#define UP2OCR_SEOS		(1 << 24)	/* Single-Ended Output Select */
+
+#define UDCCSN(x)	__REG2(0x40600100, (x) << 2)
+#define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
+#define UDCCSR0_SA	(1 << 7)	/* Setup Active */
+#define UDCCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
+#define UDCCSR0_FST	(1 << 5)	/* Force Stall */
+#define UDCCSR0_SST	(1 << 4)	/* Sent Stall */
+#define UDCCSR0_DME	(1 << 3)	/* DMA Enable */
+#define UDCCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
+#define UDCCSR0_IPR	(1 << 1)	/* IN Packet Ready */
+#define UDCCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
+
+#define UDCCSRA         __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
+#define UDCCSRB         __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
+#define UDCCSRC         __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
+#define UDCCSRD         __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
+#define UDCCSRE         __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
+#define UDCCSRF         __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
+#define UDCCSRG         __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
+#define UDCCSRH         __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
+#define UDCCSRI         __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
+#define UDCCSRJ         __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
+#define UDCCSRK         __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
+#define UDCCSRL         __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
+#define UDCCSRM         __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
+#define UDCCSRN         __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
+#define UDCCSRP         __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
+#define UDCCSRQ         __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
+#define UDCCSRR         __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
+#define UDCCSRS         __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
+#define UDCCSRT         __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
+#define UDCCSRU         __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
+#define UDCCSRV         __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
+#define UDCCSRW         __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
+#define UDCCSRX         __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
+
+#define UDCCSR_DPE	(1 << 9)	/* Data Packet Error */
+#define UDCCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
+#define UDCCSR_SP	(1 << 7)	/* Short Packet Control/Status */
+#define UDCCSR_BNE	(1 << 6)	/* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF	(1 << 6)	/* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST	(1 << 5)	/* Force STALL */
+#define UDCCSR_SST	(1 << 4)	/* Sent STALL */
+#define UDCCSR_DME	(1 << 3)	/* DMA Enable */
+#define UDCCSR_TRN	(1 << 2)	/* Tx/Rx NAK */
+#define UDCCSR_PC	(1 << 1)	/* Packet Complete */
+#define UDCCSR_FS	(1 << 0)	/* FIFO needs service */
+
+#define UDCBCN(x)	__REG2(0x40600200, (x)<<2)
+#define UDCBCR0         __REG(0x40600200) /* Byte Count Register - EP0 */
+#define UDCBCRA         __REG(0x40600204) /* Byte Count Register - EPA */
+#define UDCBCRB         __REG(0x40600208) /* Byte Count Register - EPB */
+#define UDCBCRC         __REG(0x4060020C) /* Byte Count Register - EPC */
+#define UDCBCRD         __REG(0x40600210) /* Byte Count Register - EPD */
+#define UDCBCRE         __REG(0x40600214) /* Byte Count Register - EPE */
+#define UDCBCRF         __REG(0x40600218) /* Byte Count Register - EPF */
+#define UDCBCRG         __REG(0x4060021C) /* Byte Count Register - EPG */
+#define UDCBCRH         __REG(0x40600220) /* Byte Count Register - EPH */
+#define UDCBCRI         __REG(0x40600224) /* Byte Count Register - EPI */
+#define UDCBCRJ         __REG(0x40600228) /* Byte Count Register - EPJ */
+#define UDCBCRK         __REG(0x4060022C) /* Byte Count Register - EPK */
+#define UDCBCRL         __REG(0x40600230) /* Byte Count Register - EPL */
+#define UDCBCRM         __REG(0x40600234) /* Byte Count Register - EPM */
+#define UDCBCRN         __REG(0x40600238) /* Byte Count Register - EPN */
+#define UDCBCRP         __REG(0x4060023C) /* Byte Count Register - EPP */
+#define UDCBCRQ         __REG(0x40600240) /* Byte Count Register - EPQ */
+#define UDCBCRR         __REG(0x40600244) /* Byte Count Register - EPR */
+#define UDCBCRS         __REG(0x40600248) /* Byte Count Register - EPS */
+#define UDCBCRT         __REG(0x4060024C) /* Byte Count Register - EPT */
+#define UDCBCRU         __REG(0x40600250) /* Byte Count Register - EPU */
+#define UDCBCRV         __REG(0x40600254) /* Byte Count Register - EPV */
+#define UDCBCRW         __REG(0x40600258) /* Byte Count Register - EPW */
+#define UDCBCRX         __REG(0x4060025C) /* Byte Count Register - EPX */
+
+#define UDCDN(x)	__REG2(0x40600300, (x)<<2)
+#define PHYS_UDCDN(x)	(0x40600300 + ((x)<<2))
+#define PUDCDN(x)	(volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
+#define UDCDR0          __REG(0x40600300) /* Data Register - EP0 */
+#define UDCDRA          __REG(0x40600304) /* Data Register - EPA */
+#define UDCDRB          __REG(0x40600308) /* Data Register - EPB */
+#define UDCDRC          __REG(0x4060030C) /* Data Register - EPC */
+#define UDCDRD          __REG(0x40600310) /* Data Register - EPD */
+#define UDCDRE          __REG(0x40600314) /* Data Register - EPE */
+#define UDCDRF          __REG(0x40600318) /* Data Register - EPF */
+#define UDCDRG          __REG(0x4060031C) /* Data Register - EPG */
+#define UDCDRH          __REG(0x40600320) /* Data Register - EPH */
+#define UDCDRI          __REG(0x40600324) /* Data Register - EPI */
+#define UDCDRJ          __REG(0x40600328) /* Data Register - EPJ */
+#define UDCDRK          __REG(0x4060032C) /* Data Register - EPK */
+#define UDCDRL          __REG(0x40600330) /* Data Register - EPL */
+#define UDCDRM          __REG(0x40600334) /* Data Register - EPM */
+#define UDCDRN          __REG(0x40600338) /* Data Register - EPN */
+#define UDCDRP          __REG(0x4060033C) /* Data Register - EPP */
+#define UDCDRQ          __REG(0x40600340) /* Data Register - EPQ */
+#define UDCDRR          __REG(0x40600344) /* Data Register - EPR */
+#define UDCDRS          __REG(0x40600348) /* Data Register - EPS */
+#define UDCDRT          __REG(0x4060034C) /* Data Register - EPT */
+#define UDCDRU          __REG(0x40600350) /* Data Register - EPU */
+#define UDCDRV          __REG(0x40600354) /* Data Register - EPV */
+#define UDCDRW          __REG(0x40600358) /* Data Register - EPW */
+#define UDCDRX          __REG(0x4060035C) /* Data Register - EPX */
+
+#define UDCCN(x)       __REG2(0x40600400, (x)<<2)
+#define UDCCRA          __REG(0x40600404) /* Configuration register EPA */
+#define UDCCRB          __REG(0x40600408) /* Configuration register EPB */
+#define UDCCRC          __REG(0x4060040C) /* Configuration register EPC */
+#define UDCCRD          __REG(0x40600410) /* Configuration register EPD */
+#define UDCCRE          __REG(0x40600414) /* Configuration register EPE */
+#define UDCCRF          __REG(0x40600418) /* Configuration register EPF */
+#define UDCCRG          __REG(0x4060041C) /* Configuration register EPG */
+#define UDCCRH          __REG(0x40600420) /* Configuration register EPH */
+#define UDCCRI          __REG(0x40600424) /* Configuration register EPI */
+#define UDCCRJ          __REG(0x40600428) /* Configuration register EPJ */
+#define UDCCRK          __REG(0x4060042C) /* Configuration register EPK */
+#define UDCCRL          __REG(0x40600430) /* Configuration register EPL */
+#define UDCCRM          __REG(0x40600434) /* Configuration register EPM */
+#define UDCCRN          __REG(0x40600438) /* Configuration register EPN */
+#define UDCCRP          __REG(0x4060043C) /* Configuration register EPP */
+#define UDCCRQ          __REG(0x40600440) /* Configuration register EPQ */
+#define UDCCRR          __REG(0x40600444) /* Configuration register EPR */
+#define UDCCRS          __REG(0x40600448) /* Configuration register EPS */
+#define UDCCRT          __REG(0x4060044C) /* Configuration register EPT */
+#define UDCCRU          __REG(0x40600450) /* Configuration register EPU */
+#define UDCCRV          __REG(0x40600454) /* Configuration register EPV */
+#define UDCCRW          __REG(0x40600458) /* Configuration register EPW */
+#define UDCCRX          __REG(0x4060045C) /* Configuration register EPX */
+
+#define UDCCONR_CN	(0x03 << 25)	/* Configuration Number */
+#define UDCCONR_CN_S	(25)
+#define UDCCONR_IN	(0x07 << 22)	/* Interface Number */
+#define UDCCONR_IN_S	(22)
+#define UDCCONR_AISN	(0x07 << 19)	/* Alternate Interface Number */
+#define UDCCONR_AISN_S	(19)
+#define UDCCONR_EN	(0x0f << 15)	/* Endpoint Number */
+#define UDCCONR_EN_S	(15)
+#define UDCCONR_ET	(0x03 << 13)	/* Endpoint Type: */
+#define UDCCONR_ET_S	(13)
+#define UDCCONR_ET_INT	(0x03 << 13)	/*   Interrupt */
+#define UDCCONR_ET_BULK	(0x02 << 13)	/*   Bulk */
+#define UDCCONR_ET_ISO	(0x01 << 13)	/*   Isochronous */
+#define UDCCONR_ET_NU	(0x00 << 13)	/*   Not used */
+#define UDCCONR_ED	(1 << 12)	/* Endpoint Direction */
+#define UDCCONR_MPS	(0x3ff << 2)	/* Maximum Packet Size */
+#define UDCCONR_MPS_S	(2)
+#define UDCCONR_DE	(1 << 1)	/* Double Buffering Enable */
+#define UDCCONR_EE	(1 << 0)	/* Endpoint Enable */
+
+
+#define UDC_INT_FIFOERROR  (0x2)
+#define UDC_INT_PACKETCMP  (0x1)
+
+#define UDC_FNR_MASK     (0x7ff)
+
+#define UDCCSR_WR_MASK   (UDCCSR_DME|UDCCSR_FST)
+#define UDC_BCR_MASK    (0x3ff)
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
index b81cd63cb2e..6ef1dd09970 100644
--- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h
+++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
@@ -1,6 +1,8 @@
 #ifndef __ASM_ARCH_PXA2XX_GPIO_H
 #define __ASM_ARCH_PXA2XX_GPIO_H
 
+#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
+
 /* GPIO alternate function assignments */
 
 #define GPIO1_RST		1	/* reset */
diff --git a/include/asm-arm/arch-pxa/pxa2xx-regs.h b/include/asm-arm/arch-pxa/pxa2xx-regs.h
index 9553b54fa5b..73e0a329cf7 100644
--- a/include/asm-arm/arch-pxa/pxa2xx-regs.h
+++ b/include/asm-arm/arch-pxa/pxa2xx-regs.h
@@ -81,4 +81,166 @@
 
 #endif
 
+
+/*
+ * Power Manager
+ */
+
+#define PMCR		__REG(0x40F00000)  /* Power Manager Control Register */
+#define PSSR		__REG(0x40F00004)  /* Power Manager Sleep Status Register */
+#define PSPR		__REG(0x40F00008)  /* Power Manager Scratch Pad Register */
+#define PWER		__REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
+#define PRER		__REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER		__REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR		__REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR		__REG(0x40F0001C)  /* Power Manager General Configuration Register */
+#define PGSR0		__REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1		__REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3		__REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */
+
+#define PSLR		__REG(0x40F00034)	/* Power Manager Sleep Config Register */
+#define PSTR		__REG(0x40F00038)	/* Power Manager Standby Config Register */
+#define PSNR		__REG(0x40F0003C)	/* Power Manager Sense Config Register */
+#define PVCR		__REG(0x40F00040)	/* Power Manager VoltageControl Register */
+#define PKWR		__REG(0x40F00050)	/* Power Manager KB Wake-up Enable Reg */
+#define PKSR		__REG(0x40F00054)	/* Power Manager KB Level-Detect Register */
+#define PCMD(x)	__REG2(0x40F00080, (x)<<2)
+#define PCMD0	__REG(0x40F00080 + 0 * 4)
+#define PCMD1	__REG(0x40F00080 + 1 * 4)
+#define PCMD2	__REG(0x40F00080 + 2 * 4)
+#define PCMD3	__REG(0x40F00080 + 3 * 4)
+#define PCMD4	__REG(0x40F00080 + 4 * 4)
+#define PCMD5	__REG(0x40F00080 + 5 * 4)
+#define PCMD6	__REG(0x40F00080 + 6 * 4)
+#define PCMD7	__REG(0x40F00080 + 7 * 4)
+#define PCMD8	__REG(0x40F00080 + 8 * 4)
+#define PCMD9	__REG(0x40F00080 + 9 * 4)
+#define PCMD10	__REG(0x40F00080 + 10 * 4)
+#define PCMD11	__REG(0x40F00080 + 11 * 4)
+#define PCMD12	__REG(0x40F00080 + 12 * 4)
+#define PCMD13	__REG(0x40F00080 + 13 * 4)
+#define PCMD14	__REG(0x40F00080 + 14 * 4)
+#define PCMD15	__REG(0x40F00080 + 15 * 4)
+#define PCMD16	__REG(0x40F00080 + 16 * 4)
+#define PCMD17	__REG(0x40F00080 + 17 * 4)
+#define PCMD18	__REG(0x40F00080 + 18 * 4)
+#define PCMD19	__REG(0x40F00080 + 19 * 4)
+#define PCMD20	__REG(0x40F00080 + 20 * 4)
+#define PCMD21	__REG(0x40F00080 + 21 * 4)
+#define PCMD22	__REG(0x40F00080 + 22 * 4)
+#define PCMD23	__REG(0x40F00080 + 23 * 4)
+#define PCMD24	__REG(0x40F00080 + 24 * 4)
+#define PCMD25	__REG(0x40F00080 + 25 * 4)
+#define PCMD26	__REG(0x40F00080 + 26 * 4)
+#define PCMD27	__REG(0x40F00080 + 27 * 4)
+#define PCMD28	__REG(0x40F00080 + 28 * 4)
+#define PCMD29	__REG(0x40F00080 + 29 * 4)
+#define PCMD30	__REG(0x40F00080 + 30 * 4)
+#define PCMD31	__REG(0x40F00080 + 31 * 4)
+
+#define PCMD_MBC	(1<<12)
+#define PCMD_DCE	(1<<11)
+#define PCMD_LC	(1<<10)
+/* FIXME:  PCMD_SQC need be checked.   */
+#define PCMD_SQC	(3<<8)	/* currently only bit 8 is changeable,
+				   bit 9 should be 0 all day. */
+#define PVCR_VCSA	(0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PCFR_PI2C_EN	(0x1 << 6)
+
+#define PSSR_OTGPH	(1 << 6)	/* OTG Peripheral control Hold */
+#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
+#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
+#define PSSR_STS	(1 << 3)	/* Standby Mode Status */
+#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
+#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
+#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
+
+#define PSLR_SL_ROD	(1 << 20)	/* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
+
+#define PCFR_RO		(1 << 15)	/* RDH Override */
+#define PCFR_PO		(1 << 14)	/* PH Override */
+#define PCFR_GPROD	(1 << 12)	/* GPIO nRESET_OUT Disable */
+#define PCFR_L1_EN	(1 << 11)	/* Sleep Mode L1 converter Enable */
+#define PCFR_FVC	(1 << 10)	/* Frequency/Voltage Change */
+#define PCFR_DC_EN	(1 << 7)	/* Sleep/deep-sleep DC-DC Converter Enable */
+#define PCFR_PI2CEN	(1 << 6)	/* Enable PI2C controller */
+#define PCFR_GPR_EN	(1 << 4)	/* nRESET_GPIO Pin Enable */
+#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
+#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
+#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
+#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
+#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
+#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
+#define RCSR_HWR	(1 << 0)	/* Hardware Reset */
+
+#define PWER_GPIO(Nb)	(1 << Nb)	/* GPIO [0..15] wake-up enable     */
+#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
+#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
+#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
+#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
+#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
+#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
+#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
+#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
+#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
+#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
+#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
+#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
+#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
+#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
+#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
+#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
+#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
+
+/*
+ * PXA2xx specific Core clock definitions
+ */
+#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
+#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
+#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
+#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK	0x001f	/* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
+#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
+#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
+#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
+#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
+#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
+#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
+#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
+#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
+#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
+#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
+#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
+#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
+#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
+#define CKEN_USB	(11)	/* USB Unit Clock Enable */
+#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
+#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
+#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
+#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
+#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
+#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
+#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
+#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
+#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
+#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
+#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
+#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
+
+#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
+
 #endif
diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h
index 9aa6c2e939e..ba7e132de1b 100644
--- a/include/asm-arm/arch-pxa/system.h
+++ b/include/asm-arm/arch-pxa/system.h
@@ -12,6 +12,7 @@
 
 #include <asm/proc-fns.h>
 #include "hardware.h"
+#include "pxa2xx-regs.h"
 #include "pxa-regs.h"
 
 static inline void arch_idle(void)
diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h
index 4881b80f0f9..de577de8d18 100644
--- a/include/asm-arm/arch-pxa/zylonite.h
+++ b/include/asm-arm/arch-pxa/zylonite.h
@@ -15,7 +15,6 @@ struct platform_mmc_slot {
 
 extern struct platform_mmc_slot zylonite_mmc_slot[];
 
-extern int gpio_backlight;
 extern int gpio_eth_irq;
 
 extern int wm9713_irq;