pxafb: preliminary smart panel interface support

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2 files changed, 56 insertions, 4 deletions

diff --git a/include/asm-arm/arch-pxa/pxafb.h b/include/asm-arm/arch-pxa/pxafb.h
index 41a6c2297f9..bbd22396841 100644
--- a/include/asm-arm/arch-pxa/pxafb.h
+++ b/include/asm-arm/arch-pxa/pxafb.h
@@ -48,6 +48,7 @@
 #define LCD_COLOR_DSTN_16BPP	((16 << 4) | LCD_TYPE_COLOR_DSTN)
 #define LCD_COLOR_TFT_16BPP	((16 << 4) | LCD_TYPE_COLOR_TFT)
 #define LCD_COLOR_TFT_18BPP	((18 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_SMART_PANEL_8BPP	((8  << 4) | LCD_TYPE_SMART_PANEL)
 #define LCD_SMART_PANEL_16BPP	((16 << 4) | LCD_TYPE_SMART_PANEL)
 #define LCD_SMART_PANEL_18BPP	((18 << 4) | LCD_TYPE_SMART_PANEL)
 
@@ -69,6 +70,10 @@ struct pxafb_mode_info {
 	u_short		yres;
 
 	u_char		bpp;
+	u_int		cmap_greyscale:1,
+			unused:31;
+
+	/* Parallel Mode Timing */
 	u_char		hsync_len;
 	u_char		left_margin;
 	u_char		right_margin;
@@ -78,8 +83,20 @@ struct pxafb_mode_info {
 	u_char		lower_margin;
 	u_char		sync;
 
-	u_int		cmap_greyscale:1,
-			unused:31;
+	/* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
+	 * Note:
+	 * 1. all parameters in nanosecond (ns)
+	 * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
+	 *    in pxa27x and pxa3xx, initialize them to the same value or
+	 *    the larger one will be used
+	 * 3. same to {rd,wr}_pulse_width
+	 */
+	unsigned	a0csrd_set_hld;	/* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
+	unsigned	a0cswr_set_hld;	/* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
+	unsigned	wr_pulse_width;	/* L_PCLK_WR pulse width */
+	unsigned	rd_pulse_width;	/* L_FCLK_RD pulse width */
+	unsigned	cmd_inh_time;	/* Command Inhibit time between two writes */
+	unsigned	op_hold_time;	/* Output Hold time from L_FCLK_RD negation */
 };
 
 struct pxafb_mach_info {
@@ -123,8 +140,11 @@ struct pxafb_mach_info {
 	u_int		lccr4;
 	void (*pxafb_backlight_power)(int);
 	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
-
+	void (*smart_update)(struct fb_info *);
 };
 void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
 void set_pxa_fb_parent(struct device *parent_dev);
 unsigned long pxafb_get_hsync_time(struct device *dev);
+
+extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
+extern int pxafb_smart_flush(struct fb_info *info);
diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h
index f84dd47be28..f762493f514 100644
--- a/include/asm-arm/arch-pxa/regs-lcd.h
+++ b/include/asm-arm/arch-pxa/regs-lcd.h
@@ -7,7 +7,8 @@
 #define LCCR1		(0x004)	/* LCD Controller Control Register 1 */
 #define LCCR2		(0x008)	/* LCD Controller Control Register 2 */
 #define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
-#define LCCR4		(0x010)	/* LCD Controller Control Register 3 */
+#define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
+#define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
 #define DFBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
 #define DFBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
 #define LCSR		(0x038)	/* LCD Controller Status Register */
@@ -15,6 +16,9 @@
 #define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
 #define TMEDCR		(0x044)	/* TMED Control Register */
 
+#define CMDCR		(0x100)	/* Command Control Register */
+#define PRSR		(0x104)	/* Panel Read Status Register */
+
 #define LCCR3_1BPP	(0 << 24)
 #define LCCR3_2BPP	(1 << 24)
 #define LCCR3_4BPP	(2 << 24)
@@ -39,6 +43,9 @@
 #define FSADR1		(0x214)	/* DMA Channel 1 Frame Source Address Register */
 #define FIDR1		(0x218)	/* DMA Channel 1 Frame ID Register */
 #define LDCMD1		(0x21C)	/* DMA Channel 1 Command Register */
+#define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
+#define FSADR6		(0x264) /* DMA Channel 6 Frame Source Address Register */
+#define FIDR6		(0x268) /* DMA Channel 6 Frame ID Register */
 
 #define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
 #define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
@@ -122,6 +129,11 @@
 #define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  VSP Active High */
 #define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  VSP Active Low */
 
+#define LCCR5_IUM(x)	(1 << ((x) + 23)) /* input underrun mask */
+#define LCCR5_BSM(x)	(1 << ((x) + 15)) /* branch mask */
+#define LCCR5_EOFM(x)	(1 << ((x) + 7))  /* end of frame mask */
+#define LCCR5_SOFM(x)	(1 << ((x) + 0))  /* start of frame mask */
+
 #define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
 #define LCSR_SOF	(1 << 1)	/* Start of frame */
 #define LCSR_BER	(1 << 2)	/* Bus error */
@@ -133,7 +145,27 @@
 #define LCSR_EOF	(1 << 8)	/* end of frame */
 #define LCSR_BS		(1 << 9)	/* branch status */
 #define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
+#define LCSR_RD_ST	(1 << 11)	/* read status */
+#define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
 
 #define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
 
+/* smartpanel related */
+#define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
+#define PRSR_A0		(1 << 8)	/* Read Data Source */
+#define PRSR_ST_OK	(1 << 9)	/* Status OK */
+#define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
+
+#define SMART_CMD_A0			 (0x1 << 8)
+#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
+#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
+#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
+#define SMART_CMD_NOOP			 (0x4 << 9)
+#define SMART_CMD_INTERRUPT		 (0x5 << 9)
+
+#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
+#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
 #endif /* __ASM_ARCH_REGS_LCD_H */