[ARM] move include/asm-arm to arch/arm/include/asm

Move platform independent header files to arch/arm/include/asm, leaving
those in asm/arch* and asm/plat* alone.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 0 insertions, 116 deletions

diff --git a/include/asm-arm/assembler.h b/include/asm-arm/assembler.h
deleted file mode 100644
index 911393b2c6f..00000000000
--- a/include/asm-arm/assembler.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- *  linux/include/asm-arm/assembler.h
- *
- *  Copyright (C) 1996-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  This file contains arm architecture specific defines
- *  for the different processors.
- *
- *  Do not include any C declarations in this file - it is included by
- *  assembler source.
- */
-#ifndef __ASSEMBLY__
-#error "Only include this from assembly code"
-#endif
-
-#include <asm/ptrace.h>
-
-/*
- * Endian independent macros for shifting bytes within registers.
- */
-#ifndef __ARMEB__
-#define pull            lsr
-#define push            lsl
-#define get_byte_0      lsl #0
-#define get_byte_1	lsr #8
-#define get_byte_2	lsr #16
-#define get_byte_3	lsr #24
-#define put_byte_0      lsl #0
-#define put_byte_1	lsl #8
-#define put_byte_2	lsl #16
-#define put_byte_3	lsl #24
-#else
-#define pull            lsl
-#define push            lsr
-#define get_byte_0	lsr #24
-#define get_byte_1	lsr #16
-#define get_byte_2	lsr #8
-#define get_byte_3      lsl #0
-#define put_byte_0	lsl #24
-#define put_byte_1	lsl #16
-#define put_byte_2	lsl #8
-#define put_byte_3      lsl #0
-#endif
-
-/*
- * Data preload for architectures that support it
- */
-#if __LINUX_ARM_ARCH__ >= 5
-#define PLD(code...)	code
-#else
-#define PLD(code...)
-#endif
-
-/*
- * This can be used to enable code to cacheline align the destination
- * pointer when bulk writing to memory.  Experiments on StrongARM and
- * XScale didn't show this a worthwhile thing to do when the cache is not
- * set to write-allocate (this would need further testing on XScale when WA
- * is used).
- *
- * On Feroceon there is much to gain however, regardless of cache mode.
- */
-#ifdef CONFIG_CPU_FEROCEON
-#define CALGN(code...) code
-#else
-#define CALGN(code...)
-#endif
-
-/*
- * Enable and disable interrupts
- */
-#if __LINUX_ARM_ARCH__ >= 6
-	.macro	disable_irq
-	cpsid	i
-	.endm
-
-	.macro	enable_irq
-	cpsie	i
-	.endm
-#else
-	.macro	disable_irq
-	msr	cpsr_c, #PSR_I_BIT | SVC_MODE
-	.endm
-
-	.macro	enable_irq
-	msr	cpsr_c, #SVC_MODE
-	.endm
-#endif
-
-/*
- * Save the current IRQ state and disable IRQs.  Note that this macro
- * assumes FIQs are enabled, and that the processor is in SVC mode.
- */
-	.macro	save_and_disable_irqs, oldcpsr
-	mrs	\oldcpsr, cpsr
-	disable_irq
-	.endm
-
-/*
- * Restore interrupt state previously stored in a register.  We don't
- * guarantee that this will preserve the flags.
- */
-	.macro	restore_irqs, oldcpsr
-	msr	cpsr_c, \oldcpsr
-	.endm
-
-#define USER(x...)				\
-9999:	x;					\
-	.section __ex_table,"a";		\
-	.align	3;				\
-	.long	9999b,9001f;			\
-	.previous