Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 206 insertions, 0 deletions

diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h
new file mode 100644
index 00000000000..5f10048ec54
--- /dev/null
+++ b/include/asm-arm/hardware/locomo.h
@@ -0,0 +1,206 @@
+/*
+ * linux/include/asm-arm/hardware/locomo.h
+ *
+ * This file contains the definitions for the LoCoMo G/A Chip
+ *
+ * (C) Copyright 2004 John Lenz
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Based on sa1111.h
+ */
+#ifndef _ASM_ARCH_LOCOMO
+#define _ASM_ARCH_LOCOMO
+
+#define locomo_writel(val,addr)	({ *(volatile u16 *)(addr) = (val); })
+#define locomo_readl(addr)	(*(volatile u16 *)(addr))
+
+/* LOCOMO version */
+#define LOCOMO_VER	0x00
+
+/* Pin status */
+#define LOCOMO_ST	0x04
+
+/* Pin status */
+#define LOCOMO_C32K	0x08
+
+/* Interrupt controller */
+#define LOCOMO_ICR	0x0C
+
+/* MCS decoder for boot selecting */
+#define LOCOMO_MCSX0	0x10
+#define LOCOMO_MCSX1	0x14
+#define LOCOMO_MCSX2	0x18
+#define LOCOMO_MCSX3	0x1c
+
+/* Touch panel controller */
+#define LOCOMO_ASD	0x20		/* AD start delay */
+#define LOCOMO_HSD	0x28		/* HSYS delay */
+#define LOCOMO_HSC	0x2c		/* HSYS period */
+#define LOCOMO_TADC	0x30		/* tablet ADC clock */
+
+
+/* Long time timer */
+#define LOCOMO_LTC	0xd8		/* LTC interrupt setting */
+#define LOCOMO_LTINT	0xdc		/* LTC interrupt */
+
+/* DAC control signal for LCD (COMADJ ) */
+#define LOCOMO_DAC		0xe0
+/* DAC control */
+#define	LOCOMO_DAC_SCLOEB	0x08	/* SCL pin output data       */
+#define	LOCOMO_DAC_TEST		0x04	/* Test bit                  */
+#define	LOCOMO_DAC_SDA		0x02	/* SDA pin level (read-only) */
+#define	LOCOMO_DAC_SDAOEB	0x01	/* SDA pin output data       */
+
+/* SPI interface */
+#define LOCOMO_SPIMD	0x60		/* SPI mode setting */
+#define LOCOMO_SPICT	0x64		/* SPI mode control */
+#define LOCOMO_SPIST	0x68		/* SPI status */
+#define LOCOMO_SPIIS	0x70		/* SPI interrupt status */
+#define LOCOMO_SPIWE	0x74		/* SPI interrupt status write enable */
+#define LOCOMO_SPIIE	0x78		/* SPI interrupt enable */
+#define LOCOMO_SPIIR	0x7c		/* SPI interrupt request */
+#define LOCOMO_SPITD	0x80		/* SPI transfer data write */
+#define LOCOMO_SPIRD	0x84		/* SPI receive data read */
+#define LOCOMO_SPITS	0x88		/* SPI transfer data shift */
+#define LOCOMO_SPIRS	0x8C		/* SPI receive data shift */
+#define	LOCOMO_SPI_TEND	(1 << 3)	/* Transfer end bit */
+#define	LOCOMO_SPI_OVRN	(1 << 2)	/* Over Run bit */
+#define	LOCOMO_SPI_RFW	(1 << 1)	/* write buffer bit */
+#define	LOCOMO_SPI_RFR	(1)		/* read buffer bit */
+
+/* GPIO */
+#define LOCOMO_GPD		0x90	/* GPIO direction */
+#define LOCOMO_GPE		0x94	/* GPIO input enable */
+#define LOCOMO_GPL		0x98	/* GPIO level */
+#define LOCOMO_GPO		0x9c	/* GPIO out data setteing */
+#define LOCOMO_GRIE		0xa0	/* GPIO rise detection */
+#define LOCOMO_GFIE		0xa4	/* GPIO fall detection */
+#define LOCOMO_GIS		0xa8	/* GPIO edge detection status */
+#define LOCOMO_GWE		0xac	/* GPIO status write enable */
+#define LOCOMO_GIE		0xb0	/* GPIO interrupt enable */
+#define LOCOMO_GIR		0xb4	/* GPIO interrupt request */
+#define	LOCOMO_GPIO(Nb)		(0x01 << (Nb))
+#define LOCOMO_GPIO_RTS		LOCOMO_GPIO(0)
+#define LOCOMO_GPIO_CTS		LOCOMO_GPIO(1)
+#define LOCOMO_GPIO_DSR		LOCOMO_GPIO(2)
+#define LOCOMO_GPIO_DTR		LOCOMO_GPIO(3)
+#define LOCOMO_GPIO_LCD_VSHA_ON	LOCOMO_GPIO(4)
+#define LOCOMO_GPIO_LCD_VSHD_ON	LOCOMO_GPIO(5)
+#define LOCOMO_GPIO_LCD_VEE_ON	LOCOMO_GPIO(6)
+#define LOCOMO_GPIO_LCD_MOD	LOCOMO_GPIO(7)
+#define LOCOMO_GPIO_DAC_ON	LOCOMO_GPIO(8)
+#define LOCOMO_GPIO_FL_VR	LOCOMO_GPIO(9)
+#define LOCOMO_GPIO_DAC_SDATA	LOCOMO_GPIO(10)
+#define LOCOMO_GPIO_DAC_SCK	LOCOMO_GPIO(11)
+#define LOCOMO_GPIO_DAC_SLOAD	LOCOMO_GPIO(12)
+
+/* Start the definitions of the devices.  Each device has an initial
+ * base address and a series of offsets from that base address. */
+
+/* Keyboard controller */
+#define LOCOMO_KEYBOARD		0x40
+#define LOCOMO_KIB		0x00	/* KIB level */
+#define LOCOMO_KSC		0x04	/* KSTRB control */
+#define LOCOMO_KCMD		0x08	/* KSTRB command */
+#define LOCOMO_KIC		0x0c	/* Key interrupt */
+
+/* Front light adjustment controller */
+#define LOCOMO_FRONTLIGHT	0xc8
+#define LOCOMO_ALS		0x00	/* Adjust light cycle */
+#define LOCOMO_ALD		0x04	/* Adjust light duty */
+
+/* Backlight controller: TFT signal */
+#define LOCOMO_BACKLIGHT	0x38
+#define LOCOMO_TC		0x00		/* TFT control signal */
+#define LOCOMO_CPSD		0x04		/* CPS delay */
+
+/* Audio controller */
+#define LOCOMO_AUDIO		0x54
+#define LOCOMO_ACC		0x00	/* Audio clock */
+#define LOCOMO_PAIF		0x7C	/* PCM audio interface */
+/* Audio clock */
+#define	LOCOMO_ACC_XON		0x80
+#define	LOCOMO_ACC_XEN		0x40
+#define	LOCOMO_ACC_XSEL0	0x00
+#define	LOCOMO_ACC_XSEL1	0x20
+#define	LOCOMO_ACC_MCLKEN	0x10
+#define	LOCOMO_ACC_64FSEN	0x08
+#define	LOCOMO_ACC_CLKSEL000	0x00	/* mclk  2 */
+#define	LOCOMO_ACC_CLKSEL001	0x01	/* mclk  3 */
+#define	LOCOMO_ACC_CLKSEL010	0x02	/* mclk  4 */
+#define	LOCOMO_ACC_CLKSEL011	0x03	/* mclk  6 */
+#define	LOCOMO_ACC_CLKSEL100	0x04	/* mclk  8 */
+#define	LOCOMO_ACC_CLKSEL101	0x05	/* mclk 12 */
+/* PCM audio interface */
+#define	LOCOMO_PAIF_SCINV	0x20
+#define	LOCOMO_PAIF_SCEN	0x10
+#define	LOCOMO_PAIF_LRCRST	0x08
+#define	LOCOMO_PAIF_LRCEVE	0x04
+#define	LOCOMO_PAIF_LRCINV	0x02
+#define	LOCOMO_PAIF_LRCEN	0x01
+
+/* LED controller */
+#define LOCOMO_LED		0xe8
+#define LOCOMO_LPT0		0x00
+#define LOCOMO_LPT1		0x04
+/* LED control */
+#define LOCOMO_LPT_TOFH		0x80
+#define LOCOMO_LPT_TOFL		0x08
+#define LOCOMO_LPT_TOH(TOH)	((TOH & 0x7) << 4)
+#define LOCOMO_LPT_TOL(TOL)	((TOL & 0x7))
+
+extern struct bus_type locomo_bus_type;
+
+#define LOCOMO_DEVID_KEYBOARD	0
+#define LOCOMO_DEVID_FRONTLIGHT	1
+#define LOCOMO_DEVID_BACKLIGHT	2
+#define LOCOMO_DEVID_AUDIO	3
+#define LOCOMO_DEVID_LED	4
+#define LOCOMO_DEVID_UART	5
+
+struct locomo_dev {
+	struct device	dev;
+	unsigned int	devid;
+	unsigned int	irq[1];
+
+	void		*mapbase;
+	unsigned long	length;
+
+	u64		dma_mask;
+};
+
+#define LOCOMO_DEV(_d)	container_of((_d), struct locomo_dev, dev)
+
+#define locomo_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
+#define locomo_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, p)
+
+struct locomo_driver {
+	struct device_driver	drv;
+	unsigned int		devid;
+	int (*probe)(struct locomo_dev *);
+	int (*remove)(struct locomo_dev *);
+	int (*suspend)(struct locomo_dev *, pm_message_t);
+	int (*resume)(struct locomo_dev *);
+};
+
+#define LOCOMO_DRV(_d)	container_of((_d), struct locomo_driver, drv)
+
+#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name)
+
+void locomo_lcd_power(struct locomo_dev *, int, unsigned int);
+
+int locomo_driver_register(struct locomo_driver *);
+void locomo_driver_unregister(struct locomo_driver *);
+
+/* GPIO control functions */
+void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned int dir);
+unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits);
+unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits);
+void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int set);
+
+/* M62332 control function */
+void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
+
+#endif