summaryrefslogtreecommitdiffstats
path: root/include/asm-arm26
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/asm-arm26
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'include/asm-arm26')
-rw-r--r--include/asm-arm26/a.out.h38
-rw-r--r--include/asm-arm26/assembler.h106
-rw-r--r--include/asm-arm26/atomic.h93
-rw-r--r--include/asm-arm26/bitops.h332
-rw-r--r--include/asm-arm26/bug.h17
-rw-r--r--include/asm-arm26/bugs.h15
-rw-r--r--include/asm-arm26/byteorder.h24
-rw-r--r--include/asm-arm26/cache.h11
-rw-r--r--include/asm-arm26/cacheflush.h52
-rw-r--r--include/asm-arm26/checksum.h160
-rw-r--r--include/asm-arm26/constants.h28
-rw-r--r--include/asm-arm26/cputime.h6
-rw-r--r--include/asm-arm26/current.h15
-rw-r--r--include/asm-arm26/delay.h34
-rw-r--r--include/asm-arm26/div64.h1
-rw-r--r--include/asm-arm26/dma-mapping.h2
-rw-r--r--include/asm-arm26/dma.h184
-rw-r--r--include/asm-arm26/ecard.h294
-rw-r--r--include/asm-arm26/elf.h77
-rw-r--r--include/asm-arm26/errno.h6
-rw-r--r--include/asm-arm26/fcntl.h87
-rw-r--r--include/asm-arm26/fiq.h37
-rw-r--r--include/asm-arm26/floppy.h141
-rw-r--r--include/asm-arm26/fpstate.h29
-rw-r--r--include/asm-arm26/hardirq.h41
-rw-r--r--include/asm-arm26/hardware.h110
-rw-r--r--include/asm-arm26/hdreg.h1
-rw-r--r--include/asm-arm26/ide.h34
-rw-r--r--include/asm-arm26/io.h435
-rw-r--r--include/asm-arm26/ioc.h72
-rw-r--r--include/asm-arm26/ioctl.h74
-rw-r--r--include/asm-arm26/ioctls.h81
-rw-r--r--include/asm-arm26/ipc.h1
-rw-r--r--include/asm-arm26/ipcbuf.h29
-rw-r--r--include/asm-arm26/irq.h52
-rw-r--r--include/asm-arm26/irqchip.h101
-rw-r--r--include/asm-arm26/kmap_types.h12
-rw-r--r--include/asm-arm26/leds.h51
-rw-r--r--include/asm-arm26/limits.h11
-rw-r--r--include/asm-arm26/linkage.h7
-rw-r--r--include/asm-arm26/local.h2
-rw-r--r--include/asm-arm26/locks.h161
-rw-r--r--include/asm-arm26/mach-types.h37
-rw-r--r--include/asm-arm26/map.h24
-rw-r--r--include/asm-arm26/mc146818rtc.h28
-rw-r--r--include/asm-arm26/memory.h101
-rw-r--r--include/asm-arm26/mman.h43
-rw-r--r--include/asm-arm26/mmu.h9
-rw-r--r--include/asm-arm26/mmu_context.h51
-rw-r--r--include/asm-arm26/module.h7
-rw-r--r--include/asm-arm26/msgbuf.h31
-rw-r--r--include/asm-arm26/namei.h25
-rw-r--r--include/asm-arm26/oldlatches.h37
-rw-r--r--include/asm-arm26/page.h115
-rw-r--r--include/asm-arm26/param.h33
-rw-r--r--include/asm-arm26/parport.h18
-rw-r--r--include/asm-arm26/pci.h6
-rw-r--r--include/asm-arm26/percpu.h6
-rw-r--r--include/asm-arm26/pgalloc.h70
-rw-r--r--include/asm-arm26/pgtable.h305
-rw-r--r--include/asm-arm26/poll.h25
-rw-r--r--include/asm-arm26/posix_types.h80
-rw-r--r--include/asm-arm26/proc-fns.h49
-rw-r--r--include/asm-arm26/processor.h113
-rw-r--r--include/asm-arm26/procinfo.h56
-rw-r--r--include/asm-arm26/ptrace.h104
-rw-r--r--include/asm-arm26/resource.h6
-rw-r--r--include/asm-arm26/scatterlist.h26
-rw-r--r--include/asm-arm26/sections.h2
-rw-r--r--include/asm-arm26/segment.h11
-rw-r--r--include/asm-arm26/semaphore-helper.h84
-rw-r--r--include/asm-arm26/semaphore.h103
-rw-r--r--include/asm-arm26/sembuf.h25
-rw-r--r--include/asm-arm26/serial.h63
-rw-r--r--include/asm-arm26/setup.h205
-rw-r--r--include/asm-arm26/shmbuf.h42
-rw-r--r--include/asm-arm26/shmparam.h15
-rw-r--r--include/asm-arm26/sigcontext.h33
-rw-r--r--include/asm-arm26/siginfo.h6
-rw-r--r--include/asm-arm26/signal.h201
-rw-r--r--include/asm-arm26/sizes.h52
-rw-r--r--include/asm-arm26/smp.h10
-rw-r--r--include/asm-arm26/socket.h50
-rw-r--r--include/asm-arm26/sockios.h12
-rw-r--r--include/asm-arm26/spinlock.h6
-rw-r--r--include/asm-arm26/stat.h77
-rw-r--r--include/asm-arm26/statfs.h8
-rw-r--r--include/asm-arm26/string.h43
-rw-r--r--include/asm-arm26/suspend.h4
-rw-r--r--include/asm-arm26/sysirq.h61
-rw-r--r--include/asm-arm26/system.h252
-rw-r--r--include/asm-arm26/termbits.h171
-rw-r--r--include/asm-arm26/termios.h108
-rw-r--r--include/asm-arm26/thread_info.h144
-rw-r--r--include/asm-arm26/timex.h29
-rw-r--r--include/asm-arm26/tlb.h78
-rw-r--r--include/asm-arm26/tlbflush.h70
-rw-r--r--include/asm-arm26/topology.h6
-rw-r--r--include/asm-arm26/types.h61
-rw-r--r--include/asm-arm26/uaccess-asm.h153
-rw-r--r--include/asm-arm26/uaccess.h299
-rw-r--r--include/asm-arm26/ucontext.h12
-rw-r--r--include/asm-arm26/unaligned.h118
-rw-r--r--include/asm-arm26/uncompress.h111
-rw-r--r--include/asm-arm26/unistd.h500
-rw-r--r--include/asm-arm26/user.h84
-rw-r--r--include/asm-arm26/xor.h141
107 files changed, 7919 insertions, 0 deletions
diff --git a/include/asm-arm26/a.out.h b/include/asm-arm26/a.out.h
new file mode 100644
index 00000000000..9b2702c42c8
--- /dev/null
+++ b/include/asm-arm26/a.out.h
@@ -0,0 +1,38 @@
+#ifndef __ARM_A_OUT_H__
+#define __ARM_A_OUT_H__
+
+#include <linux/personality.h>
+#include <asm/types.h>
+
+struct exec
+{
+ __u32 a_info; /* Use macros N_MAGIC, etc for access */
+ __u32 a_text; /* length of text, in bytes */
+ __u32 a_data; /* length of data, in bytes */
+ __u32 a_bss; /* length of uninitialized data area for file, in bytes */
+ __u32 a_syms; /* length of symbol table data in file, in bytes */
+ __u32 a_entry; /* start address */
+ __u32 a_trsize; /* length of relocation info for text, in bytes */
+ __u32 a_drsize; /* length of relocation info for data, in bytes */
+};
+
+/*
+ * This is always the same
+ */
+#define N_TXTADDR(a) (0x00008000)
+
+#define N_TRSIZE(a) ((a).a_trsize)
+#define N_DRSIZE(a) ((a).a_drsize)
+#define N_SYMSIZE(a) ((a).a_syms)
+
+#define M_ARM 103
+
+#ifdef __KERNEL__
+#define STACK_TOP TASK_SIZE
+#endif
+
+#ifndef LIBRARY_START_TEXT
+#define LIBRARY_START_TEXT (0x00c00000)
+#endif
+
+#endif /* __A_OUT_GNU_H__ */
diff --git a/include/asm-arm26/assembler.h b/include/asm-arm26/assembler.h
new file mode 100644
index 00000000000..83f9aec55e4
--- /dev/null
+++ b/include/asm-arm26/assembler.h
@@ -0,0 +1,106 @@
+/*
+ * linux/asm/assembler.h
+ *
+ * This file contains arm architecture specific defines
+ * for the different processors.
+ *
+ * Do not include any C declarations in this file - it is included by
+ * assembler source.
+ */
+#ifndef __ASSEMBLY__
+#error "Only include this from assembly code"
+#endif
+
+/*
+ * Endian independent macros for shifting bytes within registers.
+ */
+#define pull lsr
+#define push lsl
+#define byte(x) (x*8)
+
+#ifdef __STDC__
+#define LOADREGS(cond, base, reglist...)\
+ ldm##cond base,reglist^
+
+#define RETINSTR(instr, regs...)\
+ instr##s regs
+#else
+#define LOADREGS(cond, base, reglist...)\
+ ldm/**/cond base,reglist^
+
+#define RETINSTR(instr, regs...)\
+ instr/**/s regs
+#endif
+
+#define MODENOP\
+ mov r0, r0
+
+#define MODE(savereg,tmpreg,mode) \
+ mov savereg, pc; \
+ bic tmpreg, savereg, $0x0c000003; \
+ orr tmpreg, tmpreg, $mode; \
+ teqp tmpreg, $0
+
+#define RESTOREMODE(savereg) \
+ teqp savereg, $0
+
+#define SAVEIRQS(tmpreg)
+
+#define RESTOREIRQS(tmpreg)
+
+#define DISABLEIRQS(tmpreg)\
+ teqp pc, $0x08000003
+
+#define ENABLEIRQS(tmpreg)\
+ teqp pc, $0x00000003
+
+#define USERMODE(tmpreg)\
+ teqp pc, $0x00000000;\
+ mov r0, r0
+
+#define SVCMODE(tmpreg)\
+ teqp pc, $0x00000003;\
+ mov r0, r0
+
+
+/*
+ * Save the current IRQ state and disable IRQs
+ * Note that this macro assumes FIQs are enabled, and
+ * that the processor is in SVC mode.
+ */
+ .macro save_and_disable_irqs, oldcpsr, temp
+ mov \oldcpsr, pc
+ orr \temp, \oldcpsr, #0x08000000
+ teqp \temp, #0
+ .endm
+
+/*
+ * Restore interrupt state previously stored in
+ * a register
+ * ** Actually do nothing on Arc - hope that the caller uses a MOVS PC soon
+ * after!
+ */
+ .macro restore_irqs, oldcpsr
+ @ This be restore_irqs
+ .endm
+
+/*
+ * These two are used to save LR/restore PC over a user-based access.
+ * The old 26-bit architecture requires that we save lr (R14)
+ */
+ .macro save_lr
+ str lr, [sp, #-4]!
+ .endm
+
+ .macro restore_pc
+ ldmfd sp!, {pc}^
+ .endm
+
+#define USER(x...) \
+9999: x; \
+ .section __ex_table,"a"; \
+ .align 3; \
+ .long 9999b,9001f; \
+ .previous
+
+
diff --git a/include/asm-arm26/atomic.h b/include/asm-arm26/atomic.h
new file mode 100644
index 00000000000..4a88235c0e7
--- /dev/null
+++ b/include/asm-arm26/atomic.h
@@ -0,0 +1,93 @@
+/*
+ * linux/include/asm-arm26/atomic.h
+ *
+ * Copyright (c) 1996 Russell King.
+ * Modified for arm26 by Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 25-11-2004 IM Updated for 2.6.9
+ * 27-06-1996 RMK Created
+ * 13-04-1997 RMK Made functions atomic!
+ * 07-12-1997 RMK Upgraded for v2.1.
+ * 26-08-1998 PJB Added #ifdef __KERNEL__
+ *
+ * FIXME - its probably worth seeing what these compile into...
+ */
+#ifndef __ASM_ARM_ATOMIC_H
+#define __ASM_ARM_ATOMIC_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_SMP
+#error SMP is NOT supported
+#endif
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i) { (i) }
+
+#ifdef __KERNEL__
+#include <asm/system.h>
+
+#define atomic_read(v) ((v)->counter)
+#define atomic_set(v,i) (((v)->counter) = (i))
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+ unsigned long flags;
+ int val;
+
+ local_irq_save(flags);
+ val = v->counter;
+ v->counter = val += i;
+ local_irq_restore(flags);
+
+ return val;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+ unsigned long flags;
+ int val;
+
+ local_irq_save(flags);
+ val = v->counter;
+ v->counter = val -= i;
+ local_irq_restore(flags);
+
+ return val;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ *addr &= ~mask;
+ local_irq_restore(flags);
+}
+
+#define atomic_add(i, v) (void) atomic_add_return(i, v)
+#define atomic_inc(v) (void) atomic_add_return(1, v)
+#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
+#define atomic_dec(v) (void) atomic_sub_return(1, v)
+
+#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0)
+#define atomic_inc_return(v) (atomic_add_return(1, v))
+#define atomic_dec_return(v) (atomic_sub_return(1, v))
+
+#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
+
+/* Atomic operations are already serializing on ARM26 */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#endif
+#endif
diff --git a/include/asm-arm26/bitops.h b/include/asm-arm26/bitops.h
new file mode 100644
index 00000000000..7d062fb2e34
--- /dev/null
+++ b/include/asm-arm26/bitops.h
@@ -0,0 +1,332 @@
+/*
+ * Copyright 1995, Russell King.
+ *
+ * Based on the arm32 version by RMK (and others). Their copyrights apply to
+ * Those parts.
+ * Modified for arm26 by Ian Molton on 25/11/04
+ *
+ * bit 0 is the LSB of an "unsigned long" quantity.
+ *
+ * Please note that the code in this file should never be included
+ * from user space. Many of these are not implemented in assembler
+ * since they would be too costly. Also, they require privileged
+ * instructions (which are not available from user mode) to ensure
+ * that they are atomic.
+ */
+
+#ifndef __ASM_ARM_BITOPS_H
+#define __ASM_ARM_BITOPS_H
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <asm/system.h>
+
+#define smp_mb__before_clear_bit() do { } while (0)
+#define smp_mb__after_clear_bit() do { } while (0)
+
+/*
+ * These functions are the basis of our bit ops.
+ *
+ * First, the atomic bitops. These use native endian.
+ */
+static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long flags;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ local_irq_save(flags);
+ *p |= mask;
+ local_irq_restore(flags);
+}
+
+static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long flags;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ local_irq_save(flags);
+ *p &= ~mask;
+ local_irq_restore(flags);
+}
+
+static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long flags;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ local_irq_save(flags);
+ *p ^= mask;
+ local_irq_restore(flags);
+}
+
+static inline int
+____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long flags;
+ unsigned int res;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ local_irq_save(flags);
+ res = *p;
+ *p = res | mask;
+ local_irq_restore(flags);
+
+ return res & mask;
+}
+
+static inline int
+____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long flags;
+ unsigned int res;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ local_irq_save(flags);
+ res = *p;
+ *p = res & ~mask;
+ local_irq_restore(flags);
+
+ return res & mask;
+}
+
+static inline int
+____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
+{
+ unsigned long flags;
+ unsigned int res;
+ unsigned long mask = 1UL << (bit & 31);
+
+ p += bit >> 5;
+
+ local_irq_save(flags);
+ res = *p;
+ *p = res ^ mask;
+ local_irq_restore(flags);
+
+ return res & mask;
+}
+
+/*
+ * Now the non-atomic variants. We let the compiler handle all
+ * optimisations for these. These are all _native_ endian.
+ */
+static inline void __set_bit(int nr, volatile unsigned long *p)
+{
+ p[nr >> 5] |= (1UL << (nr & 31));
+}
+
+static inline void __clear_bit(int nr, volatile unsigned long *p)
+{
+ p[nr >> 5] &= ~(1UL << (nr & 31));
+}
+
+static inline void __change_bit(int nr, volatile unsigned long *p)
+{
+ p[nr >> 5] ^= (1UL << (nr & 31));
+}
+
+static inline int __test_and_set_bit(int nr, volatile unsigned long *p)
+{
+ unsigned long oldval, mask = 1UL << (nr & 31);
+
+ p += nr >> 5;
+
+ oldval = *p;
+ *p = oldval | mask;
+ return oldval & mask;
+}
+
+static inline int __test_and_clear_bit(int nr, volatile unsigned long *p)
+{
+ unsigned long oldval, mask = 1UL << (nr & 31);
+
+ p += nr >> 5;
+
+ oldval = *p;
+ *p = oldval & ~mask;
+ return oldval & mask;
+}
+
+static inline int __test_and_change_bit(int nr, volatile unsigned long *p)
+{
+ unsigned long oldval, mask = 1UL << (nr & 31);
+
+ p += nr >> 5;
+
+ oldval = *p;
+ *p = oldval ^ mask;
+ return oldval & mask;
+}
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static inline int __test_bit(int nr, const volatile unsigned long * p)
+{
+ return (p[nr >> 5] >> (nr & 31)) & 1UL;
+}
+
+/*
+ * Little endian assembly bitops. nr = 0 -> byte 0 bit 0.
+ */
+extern void _set_bit_le(int nr, volatile unsigned long * p);
+extern void _clear_bit_le(int nr, volatile unsigned long * p);
+extern void _change_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_set_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_change_bit_le(int nr, volatile unsigned long * p);
+extern int _find_first_zero_bit_le(void * p, unsigned size);
+extern int _find_next_zero_bit_le(void * p, int size, int offset);
+extern int _find_first_bit_le(const unsigned long *p, unsigned size);
+extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
+
+/*
+ * The __* form of bitops are non-atomic and may be reordered.
+ */
+#define ATOMIC_BITOP_LE(name,nr,p) \
+ (__builtin_constant_p(nr) ? \
+ ____atomic_##name(nr, p) : \
+ _##name##_le(nr,p))
+
+#define NONATOMIC_BITOP(name,nr,p) \
+ (____nonatomic_##name(nr, p))
+
+/*
+ * These are the little endian, atomic definitions.
+ */
+#define set_bit(nr,p) ATOMIC_BITOP_LE(set_bit,nr,p)
+#define clear_bit(nr,p) ATOMIC_BITOP_LE(clear_bit,nr,p)
+#define change_bit(nr,p) ATOMIC_BITOP_LE(change_bit,nr,p)
+#define test_and_set_bit(nr,p) ATOMIC_BITOP_LE(test_and_set_bit,nr,p)
+#define test_and_clear_bit(nr,p) ATOMIC_BITOP_LE(test_and_clear_bit,nr,p)
+#define test_and_change_bit(nr,p) ATOMIC_BITOP_LE(test_and_change_bit,nr,p)
+#define test_bit(nr,p) __test_bit(nr,p)
+#define find_first_zero_bit(p,sz) _find_first_zero_bit_le(p,sz)
+#define find_next_zero_bit(p,sz,off) _find_next_zero_bit_le(p,sz,off)
+#define find_first_bit(p,sz) _find_first_bit_le(p,sz)
+#define find_next_bit(p,sz,off) _find_next_bit_le(p,sz,off)
+
+#define WORD_BITOFF_TO_LE(x) ((x))
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+ int k;
+
+ word = ~word;
+ k = 31;
+ if (word & 0x0000ffff) { k -= 16; word <<= 16; }
+ if (word & 0x00ff0000) { k -= 8; word <<= 8; }
+ if (word & 0x0f000000) { k -= 4; word <<= 4; }
+ if (word & 0x30000000) { k -= 2; word <<= 2; }
+ if (word & 0x40000000) { k -= 1; }
+ return k;
+}
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+ int k;
+
+ k = 31;
+ if (word & 0x0000ffff) { k -= 16; word <<= 16; }
+ if (word & 0x00ff0000) { k -= 8; word <<= 8; }
+ if (word & 0x0f000000) { k -= 4; word <<= 4; }
+ if (word & 0x30000000) { k -= 2; word <<= 2; }
+ if (word & 0x40000000) { k -= 1; }
+ return k;
+}
+
+/*
+ * fls: find last bit set.
+ */
+
+#define fls(x) generic_fls(x)
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+
+#define ffs(x) generic_ffs(x)
+
+/*
+ * Find first bit set in a 168-bit bitmap, where the first
+ * 128 bits are unlikely to be set.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+ unsigned long v;
+ unsigned int off;
+
+ for (off = 0; v = b[off], off < 4; off++) {
+ if (unlikely(v))
+ break;
+ }
+ return __ffs(v) + off * 32;
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#define hweight32(x) generic_hweight32(x)
+#define hweight16(x) generic_hweight16(x)
+#define hweight8(x) generic_hweight8(x)
+
+/*
+ * Ext2 is defined to use little-endian byte ordering.
+ * These do not need to be atomic.
+ */
+#define ext2_set_bit(nr,p) \
+ __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_set_bit_atomic(lock,nr,p) \
+ test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_clear_bit(nr,p) \
+ __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_clear_bit_atomic(lock,nr,p) \
+ test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_test_bit(nr,p) \
+ __test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_find_first_zero_bit(p,sz) \
+ _find_first_zero_bit_le(p,sz)
+#define ext2_find_next_zero_bit(p,sz,off) \
+ _find_next_zero_bit_le(p,sz,off)
+
+/*
+ * Minix is defined to use little-endian byte ordering.
+ * These do not need to be atomic.
+ */
+#define minix_set_bit(nr,p) \
+ __set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_bit(nr,p) \
+ __test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_and_set_bit(nr,p) \
+ __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_and_clear_bit(nr,p) \
+ __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_find_first_zero_bit(p,sz) \
+ _find_first_zero_bit_le(p,sz)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ARM_BITOPS_H */
diff --git a/include/asm-arm26/bug.h b/include/asm-arm26/bug.h
new file mode 100644
index 00000000000..920b7053336
--- /dev/null
+++ b/include/asm-arm26/bug.h
@@ -0,0 +1,17 @@
+#ifndef _ASMARM_BUG_H
+#define _ASMARM_BUG_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+extern volatile void __bug(const char *file, int line, void *data);
+/* give file/line information */
+#define BUG() __bug(__FILE__, __LINE__, NULL)
+#else
+#define BUG() (*(int *)0 = 0)
+#endif
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/include/asm-arm26/bugs.h b/include/asm-arm26/bugs.h
new file mode 100644
index 00000000000..e99ac2e46d7
--- /dev/null
+++ b/include/asm-arm26/bugs.h
@@ -0,0 +1,15 @@
+/*
+ * linux/include/asm-arm26/bugs.h
+ *
+ * Copyright (C) 1995 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_BUGS_H
+#define __ASM_BUGS_H
+
+#define check_bugs() cpu_check_bugs()
+
+#endif
diff --git a/include/asm-arm26/byteorder.h b/include/asm-arm26/byteorder.h
new file mode 100644
index 00000000000..0b4af9ac76e
--- /dev/null
+++ b/include/asm-arm26/byteorder.h
@@ -0,0 +1,24 @@
+/*
+ * linux/include/asm-arm/byteorder.h
+ *
+ * ARM Endian-ness. In little endian mode, the data bus is connected such
+ * that byte accesses appear as:
+ * 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
+ * and word accesses (data or instruction) appear as:
+ * d0...d31
+ *
+ */
+#ifndef __ASM_ARM_BYTEORDER_H
+#define __ASM_ARM_BYTEORDER_H
+
+#include <asm/types.h>
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#include <linux/byteorder/little_endian.h>
+
+#endif
+
diff --git a/include/asm-arm26/cache.h b/include/asm-arm26/cache.h
new file mode 100644
index 00000000000..f52ca1b808c
--- /dev/null
+++ b/include/asm-arm26/cache.h
@@ -0,0 +1,11 @@
+/*
+ * linux/include/asm-arm26/cache.h
+ */
+#ifndef __ASMARM_CACHE_H
+#define __ASMARM_CACHE_H
+
+#define L1_CACHE_BYTES 32
+#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+
+#endif
diff --git a/include/asm-arm26/cacheflush.h b/include/asm-arm26/cacheflush.h
new file mode 100644
index 00000000000..9c1b9c7f2eb
--- /dev/null
+++ b/include/asm-arm26/cacheflush.h
@@ -0,0 +1,52 @@
+/*
+ * linux/include/asm-arm/cacheflush.h
+ *
+ * Copyright (C) 2000-2002 Russell King
+ * Copyright (C) 2003 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ARM26 cache 'functions'
+ *
+ */
+
+#ifndef _ASMARM_CACHEFLUSH_H
+#define _ASMARM_CACHEFLUSH_H
+
+#if 1 //FIXME - BAD INCLUDES!!!
+#include <linux/sched.h>
+#include <linux/mm.h>
+#endif
+
+#define flush_cache_all() do { } while (0)
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_range(vma,start,end) do { } while (0)
+#define flush_cache_page(vma,vmaddr,pfn) do { } while (0)
+#define flush_cache_vmap(start, end) do { } while (0)
+#define flush_cache_vunmap(start, end) do { } while (0)
+
+#define invalidate_dcache_range(start,end) do { } while (0)
+#define clean_dcache_range(start,end) do { } while (0)
+#define flush_dcache_range(start,end) do { } while (0)
+#define flush_dcache_page(page) do { } while (0)
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+#define clean_dcache_entry(_s) do { } while (0)
+#define clean_cache_entry(_start) do { } while (0)
+
+#define flush_icache_user_range(start,end, bob, fred) do { } while (0)
+#define flush_icache_range(start,end) do { } while (0)
+#define flush_icache_page(vma,page) do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+
+/* DAG: ARM3 will flush cache on MEMC updates anyway? so don't bother */
+/* IM : Yes, it will, but only if setup to do so (we do this). */
+#define clean_cache_area(_start,_size) do { } while (0)
+
+#endif
diff --git a/include/asm-arm26/checksum.h b/include/asm-arm26/checksum.h
new file mode 100644
index 00000000000..d4256d5f3a7
--- /dev/null
+++ b/include/asm-arm26/checksum.h
@@ -0,0 +1,160 @@
+/*
+ * linux/include/asm-arm/checksum.h
+ *
+ * IP checksum routines
+ *
+ * Copyright (C) Original authors of ../asm-i386/checksum.h
+ * Copyright (C) 1996-1999 Russell King
+ */
+#ifndef __ASM_ARM_CHECKSUM_H
+#define __ASM_ARM_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+unsigned int
+csum_partial_copy_nocheck(const char *src, char *dst, int len, int sum);
+
+unsigned int
+csum_partial_copy_from_user(const char __user *src, char *dst, int len, int sum, int *err_ptr);
+
+/*
+ * This is the old (and unsafe) way of doing checksums, a warning message will
+ * be printed if it is used and an exception occurs.
+ *
+ * this functions should go away after some time.
+ */
+#define csum_partial_copy(src,dst,len,sum) csum_partial_copy_nocheck(src,dst,len,sum)
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+static inline unsigned short
+ip_fast_csum(unsigned char * iph, unsigned int ihl)
+{
+ unsigned int sum, tmp1;
+
+ __asm__ __volatile__(
+ "ldr %0, [%1], #4 @ ip_fast_csum \n\
+ ldr %3, [%1], #4 \n\
+ sub %2, %2, #5 \n\
+ adds %0, %0, %3 \n\
+ ldr %3, [%1], #4 \n\
+ adcs %0, %0, %3 \n\
+ ldr %3, [%1], #4 \n\
+1: adcs %0, %0, %3 \n\
+ ldr %3, [%1], #4 \n\
+ tst %2, #15 @ do this carefully \n\
+ subne %2, %2, #1 @ without destroying \n\
+ bne 1b @ the carry flag \n\
+ adcs %0, %0, %3 \n\
+ adc %0, %0, #0 \n\
+ adds %0, %0, %0, lsl #16 \n\
+ addcs %0, %0, #0x10000 \n\
+ mvn %0, %0 \n\
+ mov %0, %0, lsr #16"
+ : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1)
+ : "1" (iph), "2" (ihl)
+ : "cc");
+ return sum;
+}
+
+/*
+ * Fold a partial checksum without adding pseudo headers
+ */
+static inline unsigned int
+csum_fold(unsigned int sum)
+{
+ __asm__(
+ "adds %0, %1, %1, lsl #16 @ csum_fold \n\
+ addcs %0, %0, #0x10000"
+ : "=r" (sum)
+ : "r" (sum)
+ : "cc");
+ return (~sum) >> 16;
+}
+
+static inline unsigned int
+csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr, unsigned short len,
+ unsigned int proto, unsigned int sum)
+{
+ __asm__(
+ "adds %0, %1, %2 @ csum_tcpudp_nofold \n\
+ adcs %0, %0, %3 \n\
+ adcs %0, %0, %4 \n\
+ adcs %0, %0, %5 \n\
+ adc %0, %0, #0"
+ : "=&r"(sum)
+ : "r" (sum), "r" (daddr), "r" (saddr), "r" (ntohs(len)), "Ir" (ntohs(proto))
+ : "cc");
+ return sum;
+}
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline unsigned short int
+csum_tcpudp_magic(unsigned long saddr, unsigned long daddr, unsigned short len,
+ unsigned int proto, unsigned int sum)
+{
+ __asm__(
+ "adds %0, %1, %2 @ csum_tcpudp_magic \n\
+ adcs %0, %0, %3 \n\
+ adcs %0, %0, %4 \n\
+ adcs %0, %0, %5 \n\
+ adc %0, %0, #0 \n\
+ adds %0, %0, %0, lsl #16 \n\
+ addcs %0, %0, #0x10000 \n\
+ mvn %0, %0"
+ : "=&r"(sum)
+ : "r" (sum), "r" (daddr), "r" (saddr), "r" (ntohs(len)), "Ir" (ntohs(proto))
+ : "cc");
+ return sum >> 16;
+}
+
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline unsigned short
+ip_compute_csum(unsigned char * buff, int len)
+{
+ return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+extern unsigned long
+__csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr, __u32 len,
+ __u32 proto, unsigned int sum);
+
+static inline unsigned short int
+csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr, __u32 len,
+ unsigned short proto, unsigned int sum)
+{
+ return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len),
+ htonl(proto), sum));
+}
+#endif
diff --git a/include/asm-arm26/constants.h b/include/asm-arm26/constants.h
new file mode 100644
index 00000000000..0d0b1441556
--- /dev/null
+++ b/include/asm-arm26/constants.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_OFFSETS_H__
+#define __ASM_OFFSETS_H__
+/*
+ * DO NOT MODIFY.
+ *
+ * This file was generated by arch/arm26/Makefile
+ *
+ */
+
+#define TSK_ACTIVE_MM 96 /* offsetof(struct task_struct, active_mm) */
+
+#define VMA_VM_MM 0 /* offsetof(struct vm_area_struct, vm_mm) */
+#define VMA_VM_FLAGS 20 /* offsetof(struct vm_area_struct, vm_flags) */
+
+#define VM_EXEC 4 /* VM_EXEC */
+
+
+#define PAGE_PRESENT 1 /* L_PTE_PRESENT */
+#define PAGE_READONLY 95 /* PAGE_READONLY */
+#define PAGE_NOT_USER 3 /* PAGE_NONE */
+#define PAGE_OLD 3 /* PAGE_NONE */
+#define PAGE_CLEAN 128 /* L_PTE_DIRTY */
+
+#define PAGE_SZ 32768 /* PAGE_SIZE */
+
+#define SYS_ERROR0 10420224 /* 0x9f0000 */
+
+#endif
diff --git a/include/asm-arm26/cputime.h b/include/asm-arm26/cputime.h
new file mode 100644
index 00000000000..d2783a9e47b
--- /dev/null
+++ b/include/asm-arm26/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __ARM26_CPUTIME_H
+#define __ARM26_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __ARM26_CPUTIME_H */
diff --git a/include/asm-arm26/current.h b/include/asm-arm26/current.h
new file mode 100644
index 00000000000..75d21e2a3ff
--- /dev/null
+++ b/include/asm-arm26/current.h
@@ -0,0 +1,15 @@
+#ifndef _ASMARM_CURRENT_H
+#define _ASMARM_CURRENT_H
+
+#include <linux/thread_info.h>
+
+static inline struct task_struct *get_current(void) __attribute_const__;
+
+static inline struct task_struct *get_current(void)
+{
+ return current_thread_info()->task;
+}
+
+#define current (get_current())
+
+#endif /* _ASMARM_CURRENT_H */
diff --git a/include/asm-arm26/delay.h b/include/asm-arm26/delay.h
new file mode 100644
index 00000000000..40fbf7bbe6c
--- /dev/null
+++ b/include/asm-arm26/delay.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_ARM_DELAY_H
+#define __ASM_ARM_DELAY_H
+
+/*
+ * Copyright (C) 1995 Russell King
+ *
+ * Delay routines, using a pre-computed "loops_per_second" value.
+ */
+
+extern void __delay(int loops);
+
+/*
+ * division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec). Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays. This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ *
+ * FIXME - lets improve it then...
+ */
+extern void udelay(unsigned long usecs);
+
+static inline unsigned long muldiv(unsigned long a, unsigned long b, unsigned long c)
+{
+ return a * b / c;
+}
+
+
+
+#endif /* defined(_ARM_DELAY_H) */
+
diff --git a/include/asm-arm26/div64.h b/include/asm-arm26/div64.h
new file mode 100644
index 00000000000..6cd978cefb2
--- /dev/null
+++ b/include/asm-arm26/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-arm26/dma-mapping.h b/include/asm-arm26/dma-mapping.h
new file mode 100644
index 00000000000..a95eae0aeb7
--- /dev/null
+++ b/include/asm-arm26/dma-mapping.h
@@ -0,0 +1,2 @@
+#include <asm-generic/dma-mapping-broken.h>
+
diff --git a/include/asm-arm26/dma.h b/include/asm-arm26/dma.h
new file mode 100644
index 00000000000..995e223e43a
--- /dev/null
+++ b/include/asm-arm26/dma.h
@@ -0,0 +1,184 @@
+#ifndef __ASM_ARM_DMA_H
+#define __ASM_ARM_DMA_H
+
+typedef unsigned int dmach_t;
+
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/memory.h>
+#include <asm/scatterlist.h>
+
+// FIXME - do we really need this? arm26 cant do 'proper' DMA
+
+typedef struct dma_struct dma_t;
+typedef unsigned int dmamode_t;
+
+struct dma_ops {
+ int (*request)(dmach_t, dma_t *); /* optional */
+ void (*free)(dmach_t, dma_t *); /* optional */
+ void (*enable)(dmach_t, dma_t *); /* mandatory */
+ void (*disable)(dmach_t, dma_t *); /* mandatory */
+ int (*residue)(dmach_t, dma_t *); /* optional */
+ int (*setspeed)(dmach_t, dma_t *, int); /* optional */
+ char *type;
+};
+
+struct dma_struct {
+ struct scatterlist buf; /* single DMA */
+ int sgcount; /* number of DMA SG */
+ struct scatterlist *sg; /* DMA Scatter-Gather List */
+
+ unsigned int active:1; /* Transfer active */
+ unsigned int invalid:1; /* Address/Count changed */
+ unsigned int using_sg:1; /* using scatter list? */
+ dmamode_t dma_mode; /* DMA mode */
+ int speed; /* DMA speed */
+
+ unsigned int lock; /* Device is allocated */
+ const char *device_id; /* Device name */
+
+ unsigned int dma_base; /* Controller base address */
+ int dma_irq; /* Controller IRQ */
+ int state; /* Controller state */
+ struct scatterlist cur_sg; /* Current controller buffer */
+
+ struct dma_ops *d_ops;
+};
+
+/* Prototype: void arch_dma_init(dma)
+ * Purpose : Initialise architecture specific DMA
+ * Params : dma - pointer to array of DMA structures
+ */
+extern void arch_dma_init(dma_t *dma);
+
+extern void isa_init_dma(dma_t *dma);
+
+
+#define MAX_DMA_ADDRESS 0x03000000
+#define MAX_DMA_CHANNELS 3
+
+/* ARC */
+#define DMA_VIRTUAL_FLOPPY0 0
+#define DMA_VIRTUAL_FLOPPY1 1
+#define DMA_VIRTUAL_SOUND 2
+
+/* A5K */
+#define DMA_FLOPPY 0
+
+/*
+ * DMA modes
+ */
+#define DMA_MODE_MASK 3
+
+#define DMA_MODE_READ 0
+#define DMA_MODE_WRITE 1
+#define DMA_MODE_CASCADE 2
+#define DMA_AUTOINIT 4
+
+extern spinlock_t dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dma_spin_lock, flags);
+ return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ */
+#define clear_dma_ff(channel)
+
+/* Set only the page register bits of the transfer address.
+ *
+ * NOTE: This is an architecture specific function, and should
+ * be hidden from the drivers
+ */
+extern void set_dma_page(dmach_t channel, char pagenr);
+
+/* Request a DMA channel
+ *
+ * Some architectures may need to do allocate an interrupt
+ */
+extern int request_dma(dmach_t channel, const char * device_id);
+
+/* Free a DMA channel
+ *
+ * Some architectures may need to do free an interrupt
+ */
+extern void free_dma(dmach_t channel);
+
+/* Enable DMA for this channel
+ *
+ * On some architectures, this may have other side effects like
+ * enabling an interrupt and setting the DMA registers.
+ */
+extern void enable_dma(dmach_t channel);
+
+/* Disable DMA for this channel
+ *
+ * On some architectures, this may have other side effects like
+ * disabling an interrupt or whatever.
+ */
+extern void disable_dma(dmach_t channel);
+
+/* Test whether the specified channel has an active DMA transfer
+ */
+extern int dma_channel_active(dmach_t channel);
+
+/* Set the DMA scatter gather list for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA address immediately, but defer it to the enable_dma().
+ */
+extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
+
+/* Set the DMA address for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA address immediately, but defer it to the enable_dma().
+ */
+extern void set_dma_addr(dmach_t channel, unsigned long physaddr);
+
+/* Set the DMA byte count for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA count immediately, but defer it to the enable_dma().
+ */
+extern void set_dma_count(dmach_t channel, unsigned long count);
+
+/* Set the transfer direction for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA transfer direction immediately, but defer it to the
+ * enable_dma().
+ */
+extern void set_dma_mode(dmach_t channel, dmamode_t mode);
+
+/* Set the transfer speed for this channel
+ */
+extern void set_dma_speed(dmach_t channel, int cycle_ns);
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+extern int get_dma_residue(dmach_t channel);
+
+#ifndef NO_DMA
+#define NO_DMA 255
+#endif
+
+#endif /* _ARM_DMA_H */
diff --git a/include/asm-arm26/ecard.h b/include/asm-arm26/ecard.h
new file mode 100644
index 00000000000..66691939c3c
--- /dev/null
+++ b/include/asm-arm26/ecard.h
@@ -0,0 +1,294 @@
+/*
+ * linux/include/asm-arm26/ecard.h
+ *
+ * definitions for expansion cards
+ *
+ * This is a new system as from Linux 1.2.3
+ *
+ * Changelog:
+ * 11-12-1996 RMK Further minor improvements
+ * 12-09-1997 RMK Added interrupt enable/disable for card level
+ * 18-05-2003 IM Adjusted for ARM26
+ *
+ * Reference: Acorns Risc OS 3 Programmers Reference Manuals.
+ */
+
+#ifndef __ASM_ECARD_H
+#define __ASM_ECARD_H
+
+/*
+ * Currently understood cards (but not necessarily
+ * supported):
+ * Manufacturer Product ID
+ */
+#define MANU_ACORN 0x0000
+#define PROD_ACORN_SCSI 0x0002
+#define PROD_ACORN_ETHER1 0x0003
+#define PROD_ACORN_MFM 0x000b
+
+#define MANU_CCONCEPTS 0x0009
+#define PROD_CCONCEPTS_COLOURCARD 0x0050
+
+#define MANU_ANT2 0x0011
+#define PROD_ANT_ETHER3 0x00a4
+
+#define MANU_ATOMWIDE 0x0017
+#define PROD_ATOMWIDE_3PSERIAL 0x0090
+
+#define MANU_IRLAM_INSTRUMENTS 0x001f
+#define MANU_IRLAM_INSTRUMENTS_ETHERN 0x5678
+
+#define MANU_OAK 0x0021
+#define PROD_OAK_SCSI 0x0058
+
+#define MANU_MORLEY 0x002b
+#define PROD_MORLEY_SCSI_UNCACHED 0x0067
+
+#define MANU_CUMANA 0x003a
+#define PROD_CUMANA_SCSI_2 0x003a
+#define PROD_CUMANA_SCSI_1 0x00a0
+
+#define MANU_ICS 0x003c
+#define PROD_ICS_IDE 0x00ae
+
+#define MANU_ICS2 0x003d
+#define PROD_ICS2_IDE 0x00ae
+
+#define MANU_SERPORT 0x003f
+#define PROD_SERPORT_DSPORT 0x00b9
+
+#define MANU_ARXE 0x0041
+#define PROD_ARXE_SCSI 0x00be
+
+#define MANU_I3 0x0046
+#define PROD_I3_ETHERLAN500 0x00d4
+#define PROD_I3_ETHERLAN600 0x00ec
+#define PROD_I3_ETHERLAN600A 0x011e
+
+#define MANU_ANT 0x0053
+#define PROD_ANT_ETHERM 0x00d8
+#define PROD_ANT_ETHERB 0x00e4
+
+#define MANU_ALSYSTEMS 0x005b
+#define PROD_ALSYS_SCSIATAPI 0x0107
+
+#define MANU_MCS 0x0063
+#define PROD_MCS_CONNECT32 0x0125
+
+#define MANU_EESOX 0x0064
+#define PROD_EESOX_SCSI2 0x008c
+
+#define MANU_YELLOWSTONE 0x0096
+#define PROD_YELLOWSTONE_RAPIDE32 0x0120
+
+#define MANU_SIMTEC 0x005f
+#define PROD_SIMTEC_IDE8 0x0130
+#define PROD_SIMTEC_IDE16 0x0131
+
+
+#ifdef ECARD_C
+#define CONST
+#else
+#define CONST const
+#endif
+
+#define MAX_ECARDS 4
+
+typedef enum { /* Cards address space */
+ ECARD_IOC,
+ ECARD_MEMC,
+ ECARD_EASI
+} card_type_t;
+
+typedef enum { /* Speed for ECARD_IOC space */
+ ECARD_SLOW = 0,
+ ECARD_MEDIUM = 1,
+ ECARD_FAST = 2,
+ ECARD_SYNC = 3
+} card_speed_t;
+
+struct ecard_id { /* Card ID structure */
+ unsigned short manufacturer;
+ unsigned short product;
+ void *data;
+};
+
+struct in_ecid { /* Packed card ID information */
+ unsigned short product; /* Product code */
+ unsigned short manufacturer; /* Manufacturer code */
+ unsigned char id:4; /* Simple ID */
+ unsigned char cd:1; /* Chunk dir present */
+ unsigned char is:1; /* Interrupt status pointers */
+ unsigned char w:2; /* Width */
+ unsigned char country; /* Country */
+ unsigned char irqmask; /* IRQ mask */
+ unsigned char fiqmask; /* FIQ mask */
+ unsigned long irqoff; /* IRQ offset */
+ unsigned long fiqoff; /* FIQ offset */
+};
+
+typedef struct expansion_card ecard_t;
+typedef unsigned long *loader_t;
+
+typedef struct { /* Card handler routines */
+ void (*irqenable)(ecard_t *ec, int irqnr);
+ void (*irqdisable)(ecard_t *ec, int irqnr);
+ int (*irqpending)(ecard_t *ec);
+ void (*fiqenable)(ecard_t *ec, int fiqnr);
+ void (*fiqdisable)(ecard_t *ec, int fiqnr);
+ int (*fiqpending)(ecard_t *ec);
+} expansioncard_ops_t;
+
+#define ECARD_NUM_RESOURCES (6)
+
+#define ECARD_RES_IOCSLOW (0)
+#define ECARD_RES_IOCMEDIUM (1)
+#define ECARD_RES_IOCFAST (2)
+#define ECARD_RES_IOCSYNC (3)
+#define ECARD_RES_MEMC (4)
+#define ECARD_RES_EASI (5)
+
+#define ecard_resource_start(ec,nr) ((ec)->resource[nr].start)
+#define ecard_resource_end(ec,nr) ((ec)->resource[nr].end)
+#define ecard_resource_len(ec,nr) ((ec)->resource[nr].end - \
+ (ec)->resource[nr].start + 1)
+
+/*
+ * This contains all the info needed on an expansion card
+ */
+struct expansion_card {
+ struct expansion_card *next;
+
+ struct device dev;
+ struct resource resource[ECARD_NUM_RESOURCES];
+
+ /* Public data */
+ volatile unsigned char *irqaddr; /* address of IRQ register */
+ volatile unsigned char *fiqaddr; /* address of FIQ register */
+ unsigned char irqmask; /* IRQ mask */
+ unsigned char fiqmask; /* FIQ mask */
+ unsigned char claimed; /* Card claimed? */
+
+ void *irq_data; /* Data for use for IRQ by card */
+ void *fiq_data; /* Data for use for FIQ by card */
+ const expansioncard_ops_t *ops; /* Enable/Disable Ops for card */
+
+ CONST unsigned int slot_no; /* Slot number */
+ CONST unsigned int dma; /* DMA number (for request_dma) */
+ CONST unsigned int irq; /* IRQ number (for request_irq) */
+ CONST unsigned int fiq; /* FIQ number (for request_irq) */
+ CONST card_type_t type; /* Type of card */
+ CONST struct in_ecid cid; /* Card Identification */
+
+ /* Private internal data */
+ const char *card_desc; /* Card description */
+ CONST unsigned int podaddr; /* Base Linux address for card */
+ CONST loader_t loader; /* loader program */
+ u64 dma_mask;
+};
+
+struct in_chunk_dir {
+ unsigned int start_offset;
+ union {
+ unsigned char string[256];
+ unsigned char data[1];
+ } d;
+};
+
+/*
+ * ecard_claim: claim an expansion card entry
+ * FIXME - are these atomic / called with interrupts off ?
+ */
+#define ecard_claim(ec) ((ec)->claimed = 1)
+
+/*
+ * ecard_release: release an expansion card entry
+ */
+#define ecard_release(ec) ((ec)->claimed = 0)
+
+/*
+ * Read a chunk from an expansion card
+ * cd : where to put read data
+ * ec : expansion card info struct
+ * id : id number to find
+ * num: (n+1)'th id to find.
+ */
+extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num);
+
+/*
+ * Obtain the address of a card
+ */
+extern unsigned int ecard_address (struct expansion_card *ec, card_type_t card_type, card_speed_t speed);
+
+#ifdef ECARD_C
+/* Definitions internal to ecard.c - for it's use only!!
+ *
+ * External expansion card header as read from the card
+ */
+struct ex_ecid {
+ unsigned char r_irq:1;
+ unsigned char r_zero:1;
+ unsigned char r_fiq:1;
+ unsigned char r_id:4;
+ unsigned char r_a:1;
+
+ unsigned char r_cd:1;
+ unsigned char r_is:1;
+ unsigned char r_w:2;
+ unsigned char r_r1:4;
+
+ unsigned char r_r2:8;
+
+ unsigned char r_prod[2];
+
+ unsigned char r_manu[2];
+
+ unsigned char r_country;
+
+ unsigned char r_irqmask;
+ unsigned char r_irqoff[3];
+
+ unsigned char r_fiqmask;
+ unsigned char r_fiqoff[3];
+};
+
+/*
+ * Chunk directory entry as read from the card
+ */
+struct ex_chunk_dir {
+ unsigned char r_id;
+ unsigned char r_len[3];
+ unsigned long r_start;
+ union {
+ char string[256];
+ char data[1];
+ } d;
+#define c_id(x) ((x)->r_id)
+#define c_len(x) ((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
+#define c_start(x) ((x)->r_start)
+};
+
+#endif
+
+extern struct bus_type ecard_bus_type;
+
+#define ECARD_DEV(_d) container_of((_d), struct expansion_card, dev)
+
+struct ecard_driver {
+ int (*probe)(struct expansion_card *, const struct ecard_id *id);
+ void (*remove)(struct expansion_card *);
+ void (*shutdown)(struct expansion_card *);
+ const struct ecard_id *id_table;
+ unsigned int id;
+ struct device_driver drv;
+};
+
+#define ECARD_DRV(_d) container_of((_d), struct ecard_driver, drv)
+
+#define ecard_set_drvdata(ec,data) dev_set_drvdata(&(ec)->dev, (data))
+#define ecard_get_drvdata(ec) dev_get_drvdata(&(ec)->dev)
+
+int ecard_register_driver(struct ecard_driver *);
+void ecard_remove_driver(struct ecard_driver *);
+
+#endif
diff --git a/include/asm-arm26/elf.h b/include/asm-arm26/elf.h
new file mode 100644
index 00000000000..8b149474db2
--- /dev/null
+++ b/include/asm-arm26/elf.h
@@ -0,0 +1,77 @@
+#ifndef __ASMARM_ELF_H
+#define __ASMARM_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/procinfo.h>
+
+//FIXME - is it always 32K ?
+
+#define ELF_EXEC_PAGESIZE 32768
+#define SET_PERSONALITY(ex,ibcs2) set_personality(PER_LINUX)
+
+typedef unsigned long elf_greg_t;
+typedef unsigned long elf_freg_t[3];
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct { void *null; } elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ * We can only execute 26-bit code.
+ */
+
+#define EM_ARM 40
+#define EF_ARM_APCS26 0x08
+
+//#define elf_check_arch(x) ( ((x)->e_machine == EM_ARM) && ((x)->e_flags & EF_ARM_APCS26) ) FIXME!!!!! - this looks OK, but the flags seem to be wrong.
+#define elf_check_arch(x) (1)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2LSB;
+#define ELF_ARCH EM_ARM
+
+#define USE_ELF_CORE_DUMP
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
+
+/* When the program starts, a1 contains a pointer to a function to be
+ registered with atexit, as per the SVR4 ABI. A value of 0 means we
+ have no such handler. */
+#define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. */
+
+extern unsigned int elf_hwcap;
+#define ELF_HWCAP (elf_hwcap)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo. */
+
+/* For now we just provide a fairly general string that describes the
+ processor family. This could be made more specific later if someone
+ implemented optimisations that require it. 26-bit CPUs give you
+ "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't
+ supported).
+ */
+
+#define ELF_PLATFORM_SIZE 8
+extern char elf_platform[];
+#define ELF_PLATFORM (elf_platform)
+
+#endif
diff --git a/include/asm-arm26/errno.h b/include/asm-arm26/errno.h
new file mode 100644
index 00000000000..6e60f0612bb
--- /dev/null
+++ b/include/asm-arm26/errno.h
@@ -0,0 +1,6 @@
+#ifndef _ARM_ERRNO_H
+#define _ARM_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif
diff --git a/include/asm-arm26/fcntl.h b/include/asm-arm26/fcntl.h
new file mode 100644
index 00000000000..485b6bdf4d7
--- /dev/null
+++ b/include/asm-arm26/fcntl.h
@@ -0,0 +1,87 @@
+#ifndef _ARM_FCNTL_H
+#define _ARM_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+ located on an ext2 file system */
+#define O_ACCMODE 0003
+#define O_RDONLY 00
+#define O_WRONLY 01
+#define O_RDWR 02
+#define O_CREAT 0100 /* not fcntl */
+#define O_EXCL 0200 /* not fcntl */
+#define O_NOCTTY 0400 /* not fcntl */
+#define O_TRUNC 01000 /* not fcntl */
+#define O_APPEND 02000
+#define O_NONBLOCK 04000
+#define O_NDELAY O_NONBLOCK
+#define O_SYNC 010000
+#define FASYNC 020000 /* fcntl, for BSD compatibility */
+#define O_DIRECTORY 040000 /* must be a directory */
+#define O_NOFOLLOW 0100000 /* don't follow links */
+#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */
+#define O_LARGEFILE 0400000
+#define O_NOATIME 01000000
+
+#define F_DUPFD 0 /* dup */
+#define F_GETFD 1 /* get close_on_exec */
+#define F_SETFD 2 /* set/clear close_on_exec */
+#define F_GETFL 3 /* get file->f_flags */
+#define F_SETFL 4 /* set file->f_flags */
+#define F_GETLK 5
+#define F_SETLK 6
+#define F_SETLKW 7
+
+#define F_SETOWN 8 /* for sockets. */
+#define F_GETOWN 9 /* for sockets. */
+#define F_SETSIG 10 /* for sockets. */
+#define F_GETSIG 11 /* for sockets. */
+
+#define F_GETLK64 12 /* using 'struct flock64' */
+#define F_SETLK64 13
+#define F_SETLKW64 14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC 1 /* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK 0
+#define F_WRLCK 1
+#define F_UNLCK 2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK 4 /* or 3 */
+#define F_SHLCK 8 /* or 4 */
+
+/* for leases */
+#define F_INPROGRESS 16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH 1 /* shared lock */
+#define LOCK_EX 2 /* exclusive lock */
+#define LOCK_NB 4 /* or'd with one of the above to prevent
+ blocking */
+#define LOCK_UN 8 /* remove lock */
+
+#define LOCK_MAND 32 /* This is a mandatory flock */
+#define LOCK_READ 64 /* ... Which allows concurrent read operations */
+#define LOCK_WRITE 128 /* ... Which allows concurrent write operations */
+#define LOCK_RW 192 /* ... Which allows concurrent read & write ops */
+
+struct flock {
+ short l_type;
+ short l_whence;
+ off_t l_start;
+ off_t l_len;
+ pid_t l_pid;
+};
+
+struct flock64 {
+ short l_type;
+ short l_whence;
+ loff_t l_start;
+ loff_t l_len;
+ pid_t l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE 1024
+#endif
diff --git a/include/asm-arm26/fiq.h b/include/asm-arm26/fiq.h
new file mode 100644
index 00000000000..a3bad09e825
--- /dev/null
+++ b/include/asm-arm26/fiq.h
@@ -0,0 +1,37 @@
+/*
+ * linux/include/asm-arm/fiq.h
+ *
+ * Support for FIQ on ARM architectures.
+ * Written by Philip Blundell <philb@gnu.org>, 1998
+ * Re-written by Russell King
+ */
+
+#ifndef __ASM_FIQ_H
+#define __ASM_FIQ_H
+
+#include <asm/ptrace.h>
+
+struct fiq_handler {
+ struct fiq_handler *next;
+ /* Name
+ */
+ const char *name;
+ /* Called to ask driver to relinquish/
+ * reacquire FIQ
+ * return zero to accept, or -<errno>
+ */
+ int (*fiq_op)(void *, int relinquish);
+ /* data for the relinquish/reacquire functions
+ */
+ void *dev_id;
+};
+
+extern int claim_fiq(struct fiq_handler *f);
+extern void release_fiq(struct fiq_handler *f);
+extern void set_fiq_handler(void *start, unsigned int length);
+extern void set_fiq_regs(struct pt_regs *regs);
+extern void get_fiq_regs(struct pt_regs *regs);
+extern void enable_fiq(int fiq);
+extern void disable_fiq(int fiq);
+
+#endif
diff --git a/include/asm-arm26/floppy.h b/include/asm-arm26/floppy.h
new file mode 100644
index 00000000000..9e090ad7e47
--- /dev/null
+++ b/include/asm-arm26/floppy.h
@@ -0,0 +1,141 @@
+/*
+ * linux/include/asm-arm/floppy.h
+ *
+ * Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
+ */
+#ifndef __ASM_ARM_FLOPPY_H
+#define __ASM_ARM_FLOPPY_H
+
+#define fd_outb(val,port) \
+ do { \
+ if ((port) == FD_DOR) \
+ fd_setdor((val)); \
+ else \
+ outb((val),(port)); \
+ } while(0)
+
+#define fd_inb(port) inb((port))
+#define fd_request_irq() request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
+ SA_INTERRUPT|SA_SAMPLE_RANDOM,"floppy",NULL)
+#define fd_free_irq() free_irq(IRQ_FLOPPYDISK,NULL)
+#define fd_disable_irq() disable_irq(IRQ_FLOPPYDISK)
+#define fd_enable_irq() enable_irq(IRQ_FLOPPYDISK)
+
+#define fd_request_dma() request_dma(DMA_FLOPPY,"floppy")
+#define fd_free_dma() free_dma(DMA_FLOPPY)
+#define fd_disable_dma() disable_dma(DMA_FLOPPY)
+#define fd_enable_dma() enable_dma(DMA_FLOPPY)
+#define fd_clear_dma_ff() clear_dma_ff(DMA_FLOPPY)
+#define fd_set_dma_mode(mode) set_dma_mode(DMA_FLOPPY, (mode))
+#define fd_set_dma_addr(addr) set_dma_addr(DMA_FLOPPY, virt_to_bus((addr)))
+#define fd_set_dma_count(len) set_dma_count(DMA_FLOPPY, (len))
+#define fd_cacheflush(addr,sz)
+
+/* need to clean up dma.h */
+#define DMA_FLOPPYDISK DMA_FLOPPY
+
+/* Floppy_selects is the list of DOR's to select drive fd
+ *
+ * On initialisation, the floppy list is scanned, and the drives allocated
+ * in the order that they are found. This is done by seeking the drive
+ * to a non-zero track, and then restoring it to track 0. If an error occurs,
+ * then there is no floppy drive present. [to be put back in again]
+ */
+static unsigned char floppy_selects[2][4] =
+{
+ { 0x10, 0x21, 0x23, 0x33 },
+ { 0x10, 0x21, 0x23, 0x33 }
+};
+
+#define fd_setdor(dor) \
+do { \
+ int new_dor = (dor); \
+ if (new_dor & 0xf0) \
+ new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3]; \
+ else \
+ new_dor &= 0x0c; \
+ outb(new_dor, FD_DOR); \
+} while (0)
+
+/*
+ * Someday, we'll automatically detect which drives are present...
+ */
+static inline void fd_scandrives (void)
+{
+#if 0
+ int floppy, drive_count;
+
+ fd_disable_irq();
+ raw_cmd = &default_raw_cmd;
+ raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
+ raw_cmd->track = 0;
+ raw_cmd->rate = ?;
+ drive_count = 0;
+ for (floppy = 0; floppy < 4; floppy ++) {
+ current_drive = drive_count;
+ /*
+ * Turn on floppy motor
+ */
+ if (start_motor(redo_fd_request))
+ continue;
+ /*
+ * Set up FDC
+ */
+ fdc_specify();
+ /*
+ * Tell FDC to recalibrate
+ */
+ output_byte(FD_RECALIBRATE);
+ LAST_OUT(UNIT(floppy));
+ /* wait for command to complete */
+ if (!successful) {
+ int i;
+ for (i = drive_count; i < 3; i--)
+ floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
+ floppy_selects[fdc][3] = 0;
+ floppy -= 1;
+ } else
+ drive_count++;
+ }
+#else
+ floppy_selects[0][0] = 0x10;
+ floppy_selects[0][1] = 0x21;
+ floppy_selects[0][2] = 0x23;
+ floppy_selects[0][3] = 0x33;
+#endif
+}
+
+#define FDC1 (0x3f0)
+
+#define FLOPPY0_TYPE 4
+#define FLOPPY1_TYPE 4
+
+#define N_FDC 1
+#define N_DRIVE 4
+
+#define FLOPPY_MOTOR_MASK 0xf0
+
+#define CROSS_64KB(a,s) (0)
+
+/*
+ * This allows people to reverse the order of
+ * fd0 and fd1, in case their hardware is
+ * strangely connected (as some RiscPCs
+ * and A5000s seem to be).
+ */
+static void driveswap(int *ints, int dummy, int dummy2)
+{
+ floppy_selects[0][0] ^= floppy_selects[0][1];
+ floppy_selects[0][1] ^= floppy_selects[0][0];
+ floppy_selects[0][0] ^= floppy_selects[0][1];
+}
+
+#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
+
+#endif
diff --git a/include/asm-arm26/fpstate.h b/include/asm-arm26/fpstate.h
new file mode 100644
index 00000000000..785749b3c5a
--- /dev/null
+++ b/include/asm-arm26/fpstate.h
@@ -0,0 +1,29 @@
+/*
+ * linux/include/asm-arm/fpstate.h
+ *
+ * Copyright (C) 1995 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_FPSTATE_H
+#define __ASM_ARM_FPSTATE_H
+
+#define FP_SIZE 35
+
+struct fp_hard_struct {
+ unsigned int save[FP_SIZE]; /* as yet undefined */
+};
+
+struct fp_soft_struct {
+ unsigned int save[FP_SIZE]; /* undefined information */
+};
+
+union fp_state {
+ struct fp_hard_struct hard;
+ struct fp_soft_struct soft;
+};
+
+#endif
diff --git a/include/asm-arm26/hardirq.h b/include/asm-arm26/hardirq.h
new file mode 100644
index 00000000000..791ee1da9bf
--- /dev/null
+++ b/include/asm-arm26/hardirq.h
@@ -0,0 +1,41 @@
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/config.h>
+#include <linux/cache.h>
+#include <linux/threads.h>
+
+typedef struct {
+ unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS 8
+
+/*
+ * The hardirq mask has to be large enough to have space
+ * for potentially all IRQ sources in the system nesting
+ * on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#define irq_enter() (preempt_count() += HARDIRQ_OFFSET)
+
+#ifndef CONFIG_SMP
+
+extern asmlinkage void __do_softirq(void);
+
+#define irq_exit() \
+ do { \
+ preempt_count() -= IRQ_EXIT_OFFSET; \
+ if (!in_interrupt() && local_softirq_pending()) \
+ __do_softirq(); \
+ preempt_enable_no_resched(); \
+ } while (0)
+#endif
+
+
+#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-arm26/hardware.h b/include/asm-arm26/hardware.h
new file mode 100644
index 00000000000..82fc55e2a00
--- /dev/null
+++ b/include/asm-arm26/hardware.h
@@ -0,0 +1,110 @@
+/*
+ * linux/include/asm-arm/arch-arc/hardware.h
+ *
+ * Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the hardware definitions of the
+ * Acorn Archimedes/A5000 machines.
+ *
+ * Modifications:
+ * 04-04-1998 PJB/RMK Merged arc and a5k versions
+ */
+#ifndef __ASM_HARDWARE_H
+#define __ASM_HARDWARE_H
+
+#include <linux/config.h>
+
+
+/*
+ * What hardware must be present - these can be tested by the kernel
+ * source.
+ */
+#define HAS_IOC
+#define HAS_MEMC
+#define HAS_VIDC
+
+#define VDMA_ALIGNMENT PAGE_SIZE
+#define VDMA_XFERSIZE 16
+#define VDMA_INIT 0
+#define VDMA_START 1
+#define VDMA_END 2
+
+#ifndef __ASSEMBLY__
+extern void memc_write(unsigned int reg, unsigned long val);
+
+#define video_set_dma(start,end,offset) \
+do { \
+ memc_write (VDMA_START, (start >> 2)); \
+ memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2); \
+ memc_write (VDMA_INIT, (offset >> 2)); \
+} while (0)
+#endif
+
+
+/* Hardware addresses of major areas.
+ * *_START is the physical address
+ * *_SIZE is the size of the region
+ * *_BASE is the virtual address
+ */
+#define IO_START 0x03000000
+#define IO_SIZE 0x01000000
+#define IO_BASE 0x03000000
+
+/*
+ * Screen mapping information
+ */
+#define SCREEN_START 0x02000000
+#define SCREEN_END 0x02078000
+#define SCREEN_SIZE 0x00078000
+#define SCREEN_BASE 0x02000000
+
+
+#define EXPMASK_BASE 0x03360000
+#define IOEB_BASE 0x03350000
+#define VIDC_BASE 0x03400000
+#define LATCHA_BASE 0x03250040
+#define LATCHB_BASE 0x03250018
+#define IOC_BASE 0x03200000
+#define FLOPPYDMA_BASE 0x0302a000
+#define PCIO_BASE 0x03010000
+
+// FIXME - are the below correct?
+#define PODSLOT_IOC0_BASE 0x03240000
+#define PODSLOT_IOC_SIZE (1 << 14)
+#define PODSLOT_MEMC_BASE 0x03000000
+#define PODSLOT_MEMC_SIZE (1 << 14)
+
+#define vidc_writel(val) __raw_writel(val, VIDC_BASE)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * for use with inb/outb
+ */
+#define IOEB_VID_CTL (IOEB_BASE + 0x48)
+#define IOEB_PRESENT (IOEB_BASE + 0x50)
+#define IOEB_PSCLR (IOEB_BASE + 0x58)
+#define IOEB_MONTYPE (IOEB_BASE + 0x70)
+
+//FIXME - These adresses are weird - ISTR some weirdo address shifting stuff was going on here...
+#define IO_EC_IOC_BASE 0x80090000
+#define IO_EC_MEMC_BASE 0x80000000
+
+#ifdef CONFIG_ARCH_ARC
+/* A680 hardware */
+#define WD1973_BASE 0x03290000
+#define WD1973_LATCH 0x03350000
+#define Z8530_BASE 0x032b0008
+#define SCSI_BASE 0x03100000
+#endif
+
+#endif
+
+#define EXPMASK_STATUS (EXPMASK_BASE + 0x00)
+#define EXPMASK_ENABLE (EXPMASK_BASE + 0x04)
+
+#endif
diff --git a/include/asm-arm26/hdreg.h b/include/asm-arm26/hdreg.h
new file mode 100644
index 00000000000..7f7fd1af0af
--- /dev/null
+++ b/include/asm-arm26/hdreg.h
@@ -0,0 +1 @@
+#include <asm-generic/hdreg.h>
diff --git a/include/asm-arm26/ide.h b/include/asm-arm26/ide.h
new file mode 100644
index 00000000000..db804d751df
--- /dev/null
+++ b/include/asm-arm26/ide.h
@@ -0,0 +1,34 @@
+/*
+ * linux/include/asm-arm/ide.h
+ *
+ * Copyright (C) 1994-1996 Linus Torvalds & authors
+ */
+
+/*
+ * This file contains the i386 architecture specific IDE code.
+ */
+
+#ifndef __ASMARM_IDE_H
+#define __ASMARM_IDE_H
+
+#ifdef __KERNEL__
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS 4
+#endif
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+/* JMA 18.05.03 these will never be needed, but the kernel needs them to compile */
+#define __ide_mm_insw(port,addr,len) readsw(port,addr,len)
+#define __ide_mm_insl(port,addr,len) readsl(port,addr,len)
+#define __ide_mm_outsw(port,addr,len) writesw(port,addr,len)
+#define __ide_mm_outsl(port,addr,len) writesl(port,addr,len)
+
+#define IDE_ARCH_OBSOLETE_INIT
+#define ide_default_io_ctl(base) (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASMARM_IDE_H */
diff --git a/include/asm-arm26/io.h b/include/asm-arm26/io.h
new file mode 100644
index 00000000000..02f94d88a12
--- /dev/null
+++ b/include/asm-arm26/io.h
@@ -0,0 +1,435 @@
+/*
+ * linux/include/asm-arm/io.h
+ *
+ * Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 16-Sep-1996 RMK Inlined the inx/outx functions & optimised for both
+ * constant addresses and variable addresses.
+ * 04-Dec-1997 RMK Moved a lot of this stuff to the new architecture
+ * specific IO header files.
+ * 27-Mar-1999 PJB Second parameter of memcpy_toio is const..
+ * 04-Apr-1999 PJB Added check_signature.
+ * 12-Dec-1999 RMK More cleanups
+ * 18-Jun-2000 RMK Removed virt_to_* and friends definitions
+ */
+#ifndef __ASM_ARM_IO_H
+#define __ASM_ARM_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+
+/*
+ * Generic IO read/write. These perform native-endian accesses. Note
+ * that some architectures will want to re-define __raw_{read,write}w.
+ */
+extern void __raw_writesb(unsigned int addr, const void *data, int bytelen);
+extern void __raw_writesw(unsigned int addr, const void *data, int wordlen);
+extern void __raw_writesl(unsigned int addr, const void *data, int longlen);
+
+extern void __raw_readsb(unsigned int addr, void *data, int bytelen);
+extern void __raw_readsw(unsigned int addr, void *data, int wordlen);
+extern void __raw_readsl(unsigned int addr, void *data, int longlen);
+
+#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v))
+#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
+#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
+
+#define __raw_readb(a) (*(volatile unsigned char *)(a))
+#define __raw_readw(a) (*(volatile unsigned short *)(a))
+#define __raw_readl(a) (*(volatile unsigned int *)(a))
+
+
+/*
+ * Bad read/write accesses...
+ */
+extern void __readwrite_bug(const char *fn);
+
+/*
+ * Now, pick up the machine-defined IO definitions
+ */
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * GCC is totally crap at loading/storing data. We try to persuade it
+ * to do the right thing by using these whereever possible instead of
+ * the above.
+ */
+#define __arch_base_getb(b,o) \
+ ({ \
+ unsigned int v, r = (b); \
+ __asm__ __volatile__( \
+ "ldrb %0, [%1, %2]" \
+ : "=r" (v) \
+ : "r" (r), "Ir" (o)); \
+ v; \
+ })
+
+#define __arch_base_getl(b,o) \
+ ({ \
+ unsigned int v, r = (b); \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2]" \
+ : "=r" (v) \
+ : "r" (r), "Ir" (o)); \
+ v; \
+ })
+
+#define __arch_base_putb(v,b,o) \
+ ({ \
+ unsigned int r = (b); \
+ __asm__ __volatile__( \
+ "strb %0, [%1, %2]" \
+ : \
+ : "r" (v), "r" (r), "Ir" (o)); \
+ })
+
+#define __arch_base_putl(v,b,o) \
+ ({ \
+ unsigned int r = (b); \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2]" \
+ : \
+ : "r" (v), "r" (r), "Ir" (o)); \
+ })
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses. PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+
+ * and are translated to the start of IO. Note that all addresses are
+ * shifted left!
+ */
+#define __PORT_PCIO(x) (!((x) & 0x80000000))
+
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+static inline void __outb (unsigned int value, unsigned int port)
+{
+ unsigned long temp;
+ __asm__ __volatile__(
+ "tst %2, #0x80000000\n\t"
+ "mov %0, %4\n\t"
+ "addeq %0, %0, %3\n\t"
+ "strb %1, [%0, %2, lsl #2] @ outb"
+ : "=&r" (temp)
+ : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+ : "cc");
+}
+
+static inline void __outw (unsigned int value, unsigned int port)
+{
+ unsigned long temp;
+ __asm__ __volatile__(
+ "tst %2, #0x80000000\n\t"
+ "mov %0, %4\n\t"
+ "addeq %0, %0, %3\n\t"
+ "str %1, [%0, %2, lsl #2] @ outw"
+ : "=&r" (temp)
+ : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+ : "cc");
+}
+
+static inline void __outl (unsigned int value, unsigned int port)
+{
+ unsigned long temp;
+ __asm__ __volatile__(
+ "tst %2, #0x80000000\n\t"
+ "mov %0, %4\n\t"
+ "addeq %0, %0, %3\n\t"
+ "str %1, [%0, %2, lsl #2] @ outl"
+ : "=&r" (temp)
+ : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+ : "cc");
+}
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr) \
+static inline unsigned sz __in##fnsuffix (unsigned int port) \
+{ \
+ unsigned long temp, value; \
+ __asm__ __volatile__( \
+ "tst %2, #0x80000000\n\t" \
+ "mov %0, %4\n\t" \
+ "addeq %0, %0, %3\n\t" \
+ "ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \
+ : "=&r" (temp), "=r" (value) \
+ : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \
+ : "cc"); \
+ return (unsigned sz)value; \
+}
+
+static inline unsigned int __ioaddr (unsigned int port) \
+{ \
+ if (__PORT_PCIO(port)) \
+ return (unsigned int)(PCIO_BASE + (port << 2)); \
+ else \
+ return (unsigned int)(IO_BASE + (port << 2)); \
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr) \
+ DECLARE_DYN_IN(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port) \
+({ \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "strb %0, [%1, %2] @ outbc" \
+ : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "strb %0, [%1, %2] @ outbc" \
+ : : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \
+})
+
+#define __inbc(port) \
+({ \
+ unsigned char result; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "ldrb %0, [%1, %2] @ inbc" \
+ : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "ldrb %0, [%1, %2] @ inbc" \
+ : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
+ result; \
+})
+
+#define __outwc(value,port) \
+({ \
+ unsigned long v = value; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2] @ outwc" \
+ : : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2] @ outwc" \
+ : : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2)); \
+})
+
+#define __inwc(port) \
+({ \
+ unsigned short result; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2] @ inwc" \
+ : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2] @ inwc" \
+ : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
+ result & 0xffff; \
+})
+
+#define __outlc(value,port) \
+({ \
+ unsigned long v = value; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2] @ outlc" \
+ : : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "str %0, [%1, %2] @ outlc" \
+ : : "r" (v), "r" (IO_BASE), "r" ((port) << 2)); \
+})
+
+#define __inlc(port) \
+({ \
+ unsigned long result; \
+ if (__PORT_PCIO((port))) \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2] @ inlc" \
+ : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
+ else \
+ __asm__ __volatile__( \
+ "ldr %0, [%1, %2] @ inlc" \
+ : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
+ result; \
+})
+
+#define __ioaddrc(port) \
+({ \
+ unsigned long addr; \
+ if (__PORT_PCIO((port))) \
+ addr = PCIO_BASE + ((port) << 2); \
+ else \
+ addr = IO_BASE + ((port) << 2); \
+ addr; \
+})
+
+#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
+#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
+#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p))
+#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p))
+
+/* JMA 18.02.03 added sb,sl from arm/io.h, changing io to ioaddr */
+
+#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l)
+#define outsl(p,d,l) __raw_writesl(__ioaddr(p),d,l)
+
+#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
+#define insl(p,d,l) __raw_readsl(__ioaddr(p),d,l)
+
+#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
+#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l)
+
+#define readb(c) (__readwrite_bug("readb"),0)
+#define readw(c) (__readwrite_bug("readw"),0)
+#define readl(c) (__readwrite_bug("readl"),0)
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+#define writeb(v,c) __readwrite_bug("writeb")
+#define writew(v,c) __readwrite_bug("writew")
+#define writel(v,c) __readwrite_bug("writel")
+
+#define readsw(p,d,l) (__readwrite_bug("readsw"),0)
+#define readsl(p,d,l) (__readwrite_bug("readsl"),0)
+#define writesw(p,d,l) __readwrite_bug("writesw")
+#define writesl(p,d,l) __readwrite_bug("writesl")
+
+#define mmiowb()
+
+/* the following macro is depreciated */
+#define ioaddr(port) __ioaddr((port))
+
+/*
+ * No ioremap support here.
+ */
+#define __arch_ioremap(c,s,f,a) ((void *)(c))
+#define __arch_iounmap(c) do { } while (0)
+
+
+#if defined(__arch_putb) || defined(__arch_putw) || defined(__arch_putl) || \
+ defined(__arch_getb) || defined(__arch_getw) || defined(__arch_getl)
+#warning machine class uses old __arch_putw or __arch_getw
+#endif
+
+/*
+ * IO port access primitives
+ * -------------------------
+ *
+ * The ARM doesn't have special IO access instructions; all IO is memory
+ * mapped. Note that these are defined to perform little endian accesses
+ * only. Their primary purpose is to access PCI and ISA peripherals.
+ *
+ * Note that for a big endian machine, this implies that the following
+ * big endian mode connectivity is in place, as described by numerious
+ * ARM documents:
+ *
+ * PCI: D0-D7 D8-D15 D16-D23 D24-D31
+ * ARM: D24-D31 D16-D23 D8-D15 D0-D7
+ *
+ * The machine specific io.h include defines __io to translate an "IO"
+ * address to a memory address.
+ *
+ * Note that we prevent GCC re-ordering or caching values in expressions
+ * by introducing sequence points into the in*() definitions. Note that
+ * __raw_* do not guarantee this behaviour.
+ */
+/*
+#define outsb(p,d,l) __raw_writesb(__io(p),d,l)
+#define outsw(p,d,l) __raw_writesw(__io(p),d,l)
+
+#define insb(p,d,l) __raw_readsb(__io(p),d,l)
+#define insw(p,d,l) __raw_readsw(__io(p),d,l)
+*/
+#define outb_p(val,port) outb((val),(port))
+#define outw_p(val,port) outw((val),(port))
+#define inb_p(port) inb((port))
+#define inw_p(port) inw((port))
+#define inl_p(port) inl((port))
+
+#define outsb_p(port,from,len) outsb(port,from,len)
+#define outsw_p(port,from,len) outsw(port,from,len)
+#define insb_p(port,to,len) insb(port,to,len)
+#define insw_p(port,to,len) insw(port,to,len)
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void _memcpy_fromio(void *, unsigned long, size_t);
+extern void _memcpy_toio(unsigned long, const void *, size_t);
+extern void _memset_io(unsigned long, int, size_t);
+
+/*
+ * ioremap and friends.
+ *
+ * ioremap takes a PCI memory address, as specified in
+ * Documentation/IO-mapping.txt.
+ */
+extern void * __ioremap(unsigned long, size_t, unsigned long, unsigned long);
+extern void __iounmap(void *addr);
+
+#ifndef __arch_ioremap
+#define ioremap(cookie,size) __ioremap(cookie,size,0,1)
+#define ioremap_nocache(cookie,size) __ioremap(cookie,size,0,1)
+#define iounmap(cookie) __iounmap(cookie)
+#else
+#define ioremap(cookie,size) __arch_ioremap((cookie),(size),0,1)
+#define ioremap_nocache(cookie,size) __arch_ioremap((cookie),(size),0,1)
+#define iounmap(cookie) __arch_iounmap(cookie)
+#endif
+
+/*
+ * DMA-consistent mapping functions. These allocate/free a region of
+ * uncached, unwrite-buffered mapped memory space for use with DMA
+ * devices. This is the "generic" version. The PCI specific version
+ * is in pci.h
+ */
+extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle);
+extern void consistent_free(void *vaddr, size_t size, dma_addr_t handle);
+extern void consistent_sync(void *vaddr, size_t size, int rw);
+
+/*
+ * can the hardware map this into one segment or not, given no other
+ * constraints.
+ */
+#define BIOVEC_MERGEABLE(vec1, vec2) \
+ ((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2)))
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ARM_IO_H */
diff --git a/include/asm-arm26/ioc.h b/include/asm-arm26/ioc.h
new file mode 100644
index 00000000000..b3b46ef6594
--- /dev/null
+++ b/include/asm-arm26/ioc.h
@@ -0,0 +1,72 @@
+/*
+ * linux/include/asm-arm/hardware/ioc.h
+ *
+ * Copyright (C) Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Use these macros to read/write the IOC. All it does is perform the actual
+ * read/write.
+ */
+#ifndef __ASMARM_HARDWARE_IOC_H
+#define __ASMARM_HARDWARE_IOC_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * We use __raw_base variants here so that we give the compiler the
+ * chance to keep IOC_BASE in a register.
+ */
+#define ioc_readb(off) __raw_readb(IOC_BASE + (off))
+#define ioc_writeb(val,off) __raw_writeb(val, IOC_BASE + (off))
+
+#endif
+
+#define IOC_CONTROL (0x00)
+#define IOC_KARTTX (0x04)
+#define IOC_KARTRX (0x04)
+
+#define IOC_IRQSTATA (0x10)
+#define IOC_IRQREQA (0x14)
+#define IOC_IRQCLRA (0x14)
+#define IOC_IRQMASKA (0x18)
+
+#define IOC_IRQSTATB (0x20)
+#define IOC_IRQREQB (0x24)
+#define IOC_IRQMASKB (0x28)
+
+#define IOC_FIQSTAT (0x30)
+#define IOC_FIQREQ (0x34)
+#define IOC_FIQMASK (0x38)
+
+#define IOC_T0CNTL (0x40)
+#define IOC_T0LTCHL (0x40)
+#define IOC_T0CNTH (0x44)
+#define IOC_T0LTCHH (0x44)
+#define IOC_T0GO (0x48)
+#define IOC_T0LATCH (0x4c)
+
+#define IOC_T1CNTL (0x50)
+#define IOC_T1LTCHL (0x50)
+#define IOC_T1CNTH (0x54)
+#define IOC_T1LTCHH (0x54)
+#define IOC_T1GO (0x58)
+#define IOC_T1LATCH (0x5c)
+
+#define IOC_T2CNTL (0x60)
+#define IOC_T2LTCHL (0x60)
+#define IOC_T2CNTH (0x64)
+#define IOC_T2LTCHH (0x64)
+#define IOC_T2GO (0x68)
+#define IOC_T2LATCH (0x6c)
+
+#define IOC_T3CNTL (0x70)
+#define IOC_T3LTCHL (0x70)
+#define IOC_T3CNTH (0x74)
+#define IOC_T3LTCHH (0x74)
+#define IOC_T3GO (0x78)
+#define IOC_T3LATCH (0x7c)
+
+#endif
diff --git a/include/asm-arm26/ioctl.h b/include/asm-arm26/ioctl.h
new file mode 100644
index 00000000000..2cbb7d0e9dc
--- /dev/null
+++ b/include/asm-arm26/ioctl.h
@@ -0,0 +1,74 @@
+/*
+ * linux/ioctl.h for Linux by H.H. Bergman.
+ */
+
+#ifndef _ASMARM_IOCTL_H
+#define _ASMARM_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms. The i386 ioctl numbering scheme doesn't really enforce
+ * a type field. De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here. Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS 8
+#define _IOC_TYPEBITS 8
+#define _IOC_SIZEBITS 14
+#define _IOC_DIRBITS 2
+
+#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT 0
+#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE 0U
+#define _IOC_WRITE 1U
+#define _IOC_READ 2U
+
+#define _IOC(dir,type,nr,size) \
+ (((dir) << _IOC_DIRSHIFT) | \
+ ((type) << _IOC_TYPESHIFT) | \
+ ((nr) << _IOC_NRSHIFT) | \
+ ((size) << _IOC_SIZESHIFT))
+
+/* used to create numbers */
+#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT (_IOC_SIZESHIFT)
+
+#endif /* _ASMARM_IOCTL_H */
diff --git a/include/asm-arm26/ioctls.h b/include/asm-arm26/ioctls.h
new file mode 100644
index 00000000000..ba9c7d81d24
--- /dev/null
+++ b/include/asm-arm26/ioctls.h
@@ -0,0 +1,81 @@
+#ifndef __ASM_ARM_IOCTLS_H
+#define __ASM_ARM_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS 0x5401
+#define TCSETS 0x5402
+#define TCSETSW 0x5403
+#define TCSETSF 0x5404
+#define TCGETA 0x5405
+#define TCSETA 0x5406
+#define TCSETAW 0x5407
+#define TCSETAF 0x5408
+#define TCSBRK 0x5409
+#define TCXONC 0x540A
+#define TCFLSH 0x540B
+#define TIOCEXCL 0x540C
+#define TIOCNXCL 0x540D
+#define TIOCSCTTY 0x540E
+#define TIOCGPGRP 0x540F
+#define TIOCSPGRP 0x5410
+#define TIOCOUTQ 0x5411
+#define TIOCSTI 0x5412
+#define TIOCGWINSZ 0x5413
+#define TIOCSWINSZ 0x5414
+#define TIOCMGET 0x5415
+#define TIOCMBIS 0x5416
+#define TIOCMBIC 0x5417
+#define TIOCMSET 0x5418
+#define TIOCGSOFTCAR 0x5419
+#define TIOCSSOFTCAR 0x541A
+#define FIONREAD 0x541B
+#define TIOCINQ FIONREAD
+#define TIOCLINUX 0x541C
+#define TIOCCONS 0x541D
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TIOCPKT 0x5420
+#define FIONBIO 0x5421
+#define TIOCNOTTY 0x5422
+#define TIOCSETD 0x5423
+#define TIOCGETD 0x5424
+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
+#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
+#define TIOCSBRK 0x5427 /* BSD compatibility */
+#define TIOCCBRK 0x5428 /* BSD compatibility */
+#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+
+#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
+#define FIOCLEX 0x5451
+#define FIOASYNC 0x5452
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+#define FIOQSIZE 0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+#endif
diff --git a/include/asm-arm26/ipc.h b/include/asm-arm26/ipc.h
new file mode 100644
index 00000000000..a46e3d9c2a3
--- /dev/null
+++ b/include/asm-arm26/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-arm26/ipcbuf.h b/include/asm-arm26/ipcbuf.h
new file mode 100644
index 00000000000..97683975f7d
--- /dev/null
+++ b/include/asm-arm26/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __ASMARM_IPCBUF_H
+#define __ASMARM_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+ __kernel_key_t key;
+ __kernel_uid32_t uid;
+ __kernel_gid32_t gid;
+ __kernel_uid32_t cuid;
+ __kernel_gid32_t cgid;
+ __kernel_mode_t mode;
+ unsigned short __pad1;
+ unsigned short seq;
+ unsigned short __pad2;
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* __ASMARM_IPCBUF_H */
diff --git a/include/asm-arm26/irq.h b/include/asm-arm26/irq.h
new file mode 100644
index 00000000000..06bd5a543d1
--- /dev/null
+++ b/include/asm-arm26/irq.h
@@ -0,0 +1,52 @@
+#ifndef __ASM_ARM_IRQ_H
+#define __ASM_ARM_IRQ_H
+
+#include <asm/sysirq.h>
+
+#ifndef NR_IRQS
+#define NR_IRQS 128
+#endif
+
+
+/* JMA 18.05.02 Copied off arch/arm/irq.h */
+#ifndef irq_canonicalize
+#define irq_canonicalize(i) (i)
+#endif
+
+
+/*
+ * Use this value to indicate lack of interrupt
+ * capability
+ */
+#ifndef NO_IRQ
+#define NO_IRQ ((unsigned int)(-1))
+#endif
+
+struct irqaction;
+
+#define disable_irq_nosync(i) disable_irq(i)
+
+extern void disable_irq(unsigned int);
+extern void enable_irq(unsigned int);
+
+#define __IRQT_FALEDGE (1 << 0)
+#define __IRQT_RISEDGE (1 << 1)
+#define __IRQT_LOWLVL (1 << 2)
+#define __IRQT_HIGHLVL (1 << 3)
+
+#define IRQT_NOEDGE (0)
+#define IRQT_RISING (__IRQT_RISEDGE)
+#define IRQT_FALLING (__IRQT_FALEDGE)
+#define IRQT_BOTHEDGE (__IRQT_RISEDGE|__IRQT_FALEDGE)
+#define IRQT_LOW (__IRQT_LOWLVL)
+#define IRQT_HIGH (__IRQT_HIGHLVL)
+#define IRQT_PROBE (1 << 4)
+
+int set_irq_type(unsigned int irq, unsigned int type);
+
+int setup_irq(unsigned int, struct irqaction *);
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif
+
diff --git a/include/asm-arm26/irqchip.h b/include/asm-arm26/irqchip.h
new file mode 100644
index 00000000000..6a007a95409
--- /dev/null
+++ b/include/asm-arm26/irqchip.h
@@ -0,0 +1,101 @@
+/*
+ * linux/include/asm-arm/mach/irq.h
+ *
+ * Copyright (C) 1995-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_MACH_IRQ_H
+#define __ASM_ARM_MACH_IRQ_H
+
+struct irqdesc;
+struct pt_regs;
+struct seq_file;
+
+typedef void (*irq_handler_t)(unsigned int, struct irqdesc *, struct pt_regs *);
+typedef void (*irq_control_t)(unsigned int);
+
+struct irqchip {
+ /*
+ * Acknowledge the IRQ.
+ * If this is a level-based IRQ, then it is expected to mask the IRQ
+ * as well.
+ */
+ void (*ack)(unsigned int);
+ /*
+ * Mask the IRQ in hardware.
+ */
+ void (*mask)(unsigned int);
+ /*
+ * Unmask the IRQ in hardware.
+ */
+ void (*unmask)(unsigned int);
+ /*
+ * Re-run the IRQ
+ */
+ void (*rerun)(unsigned int);
+ /*
+ * Set the type of the IRQ.
+ */
+ int (*type)(unsigned int, unsigned int);
+};
+
+struct irqdesc {
+ irq_handler_t handle;
+ struct irqchip *chip;
+ struct irqaction *action;
+
+ unsigned int enabled : 1; /* IRQ is currently enabled */
+ unsigned int triggered: 1; /* IRQ has occurred */
+ unsigned int running : 1; /* IRQ is running */
+ unsigned int pending : 1; /* IRQ is pending */
+ unsigned int probing : 1; /* IRQ in use for a probe */
+ unsigned int probe_ok : 1; /* IRQ can be used for probe */
+ unsigned int valid : 1; /* IRQ claimable */
+ unsigned int noautoenable : 1; /* don't automatically enable IRQ */
+ unsigned int unused :23;
+ unsigned int depth; /* disable depth */
+
+ /*
+ * IRQ lock detection
+ */
+ unsigned int lck_cnt;
+ unsigned int lck_pc;
+ unsigned int lck_jif;
+};
+
+extern struct irqdesc irq_desc[];
+
+/*
+ * This is internal. Do not use it.
+ */
+extern void (*init_arch_irq)(void);
+extern void init_FIQ(void);
+extern int show_fiq_list(struct seq_file *, void *);
+void __set_irq_handler(unsigned int irq, irq_handler_t, int);
+
+/*
+ * External stuff.
+ */
+#define set_irq_handler(irq,handler) __set_irq_handler(irq,handler,0)
+#define set_irq_chained_handler(irq,handler) __set_irq_handler(irq,handler,1)
+
+void set_irq_chip(unsigned int irq, struct irqchip *);
+void set_irq_flags(unsigned int irq, unsigned int flags);
+
+#define IRQF_VALID (1 << 0)
+#define IRQF_PROBE (1 << 1)
+#define IRQF_NOAUTOEN (1 << 2)
+
+/*
+ * Built-in IRQ handlers.
+ */
+void do_level_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
+void do_edge_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
+void do_simple_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
+void do_bad_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs);
+void dummy_mask_unmask_irq(unsigned int irq);
+
+#endif
diff --git a/include/asm-arm26/kmap_types.h b/include/asm-arm26/kmap_types.h
new file mode 100644
index 00000000000..d5da712b723
--- /dev/null
+++ b/include/asm-arm26/kmap_types.h
@@ -0,0 +1,12 @@
+#ifndef __ARM_KMAP_TYPES_H
+#define __ARM_KMAP_TYPES_H
+
+/*
+ * This is the "bare minimum". AIO seems to require this.
+ */
+enum km_type {
+ KM_IRQ0,
+ KM_USER1
+};
+
+#endif
diff --git a/include/asm-arm26/leds.h b/include/asm-arm26/leds.h
new file mode 100644
index 00000000000..88ce4124f85
--- /dev/null
+++ b/include/asm-arm26/leds.h
@@ -0,0 +1,51 @@
+/*
+ * linux/include/asm-arm/leds.h
+ *
+ * Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Event-driven interface for LEDs on machines
+ * Added led_start and led_stop- Alex Holden, 28th Dec 1998.
+ */
+#ifndef ASM_ARM_LEDS_H
+#define ASM_ARM_LEDS_H
+
+#include <linux/config.h>
+
+typedef enum {
+ led_idle_start,
+ led_idle_end,
+ led_timer,
+ led_start,
+ led_stop,
+ led_claim, /* override idle & timer leds */
+ led_release, /* restore idle & timer leds */
+ led_start_timer_mode,
+ led_stop_timer_mode,
+ led_green_on,
+ led_green_off,
+ led_amber_on,
+ led_amber_off,
+ led_red_on,
+ led_red_off,
+ led_blue_on,
+ led_blue_off,
+ /*
+ * I want this between led_timer and led_start, but
+ * someone has decided to export this to user space
+ */
+ led_halted
+} led_event_t;
+
+/* Use this routine to handle LEDs */
+
+#ifdef CONFIG_LEDS
+extern void (*leds_event)(led_event_t);
+#else
+#define leds_event(e)
+#endif
+
+#endif
diff --git a/include/asm-arm26/limits.h b/include/asm-arm26/limits.h
new file mode 100644
index 00000000000..08d8c660080
--- /dev/null
+++ b/include/asm-arm26/limits.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_PIPE_H
+#define __ASM_PIPE_H
+
+#ifndef PAGE_SIZE
+#include <asm/page.h>
+#endif
+
+#define PIPE_BUF PAGE_SIZE
+
+#endif
+
diff --git a/include/asm-arm26/linkage.h b/include/asm-arm26/linkage.h
new file mode 100644
index 00000000000..dbe4b4e31a5
--- /dev/null
+++ b/include/asm-arm26/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .align 0
+#define __ALIGN_STR ".align 0"
+
+#endif
diff --git a/include/asm-arm26/local.h b/include/asm-arm26/local.h
new file mode 100644
index 00000000000..6759e9183ce
--- /dev/null
+++ b/include/asm-arm26/local.h
@@ -0,0 +1,2 @@
+//FIXME - nicked from arm32 - check it is correct...
+#include <asm-generic/local.h>
diff --git a/include/asm-arm26/locks.h b/include/asm-arm26/locks.h
new file mode 100644
index 00000000000..81b3bda2ed0
--- /dev/null
+++ b/include/asm-arm26/locks.h
@@ -0,0 +1,161 @@
+/*
+ * linux/include/asm-arm/proc-armo/locks.h
+ *
+ * Copyright (C) 2000 Russell King
+ * Fixes for 26 bit machines, (C) 2000 Dave Gilbert
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Interrupt safe locking assembler.
+ */
+#ifndef __ASM_PROC_LOCKS_H
+#define __ASM_PROC_LOCKS_H
+
+/* Decrements by 1, fails if value < 0 */
+#define __down_op(ptr,fail) \
+ ({ \
+ __asm__ __volatile__ ( \
+ "@ atomic down operation\n" \
+" mov ip, pc\n" \
+" orr lr, ip, #0x08000000\n" \
+" teqp lr, #0\n" \
+" ldr lr, [%0]\n" \
+" and ip, ip, #0x0c000003\n" \
+" subs lr, lr, #1\n" \
+" str lr, [%0]\n" \
+" orrmi ip, ip, #0x80000000 @ set N\n" \
+" teqp ip, #0\n" \
+" movmi ip, %0\n" \
+" blmi " #fail \
+ : \
+ : "r" (ptr) \
+ : "ip", "lr", "cc"); \
+ })
+
+#define __down_op_ret(ptr,fail) \
+ ({ \
+ unsigned int result; \
+ __asm__ __volatile__ ( \
+" @ down_op_ret\n" \
+" mov ip, pc\n" \
+" orr lr, ip, #0x08000000\n" \
+" teqp lr, #0\n" \
+" ldr lr, [%1]\n" \
+" and ip, ip, #0x0c000003\n" \
+" subs lr, lr, #1\n" \
+" str lr, [%1]\n" \
+" orrmi ip, ip, #0x80000000 @ set N\n" \
+" teqp ip, #0\n" \
+" movmi ip, %1\n" \
+" movpl ip, #0\n" \
+" blmi " #fail "\n" \
+" mov %0, ip" \
+ : "=&r" (result) \
+ : "r" (ptr) \
+ : "ip", "lr", "cc"); \
+ result; \
+ })
+
+#define __up_op(ptr,wake) \
+ ({ \
+ __asm__ __volatile__ ( \
+ "@ up_op\n" \
+" mov ip, pc\n" \
+" orr lr, ip, #0x08000000\n" \
+" teqp lr, #0\n" \
+" ldr lr, [%0]\n" \
+" and ip, ip, #0x0c000003\n" \
+" adds lr, lr, #1\n" \
+" str lr, [%0]\n" \
+" orrle ip, ip, #0x80000000 @ set N - should this be mi ??? DAG ! \n" \
+" teqp ip, #0\n" \
+" movmi ip, %0\n" \
+" blmi " #wake \
+ : \
+ : "r" (ptr) \
+ : "ip", "lr", "cc"); \
+ })
+
+/*
+ * The value 0x01000000 supports up to 128 processors and
+ * lots of processes. BIAS must be chosen such that sub'ing
+ * BIAS once per CPU will result in the long remaining
+ * negative.
+ */
+#define RW_LOCK_BIAS 0x01000000
+#define RW_LOCK_BIAS_STR "0x01000000"
+
+/* Decrements by RW_LOCK_BIAS rather than 1, fails if value != 0 */
+#define __down_op_write(ptr,fail) \
+ ({ \
+ __asm__ __volatile__( \
+ "@ down_op_write\n" \
+" mov ip, pc\n" \
+" orr lr, ip, #0x08000000\n" \
+" teqp lr, #0\n" \
+" and ip, ip, #0x0c000003\n" \
+\
+" ldr lr, [%0]\n" \
+" subs lr, lr, %1\n" \
+" str lr, [%0]\n" \
+\
+" orreq ip, ip, #0x40000000 @ set Z \n"\
+" teqp ip, #0\n" \
+" movne ip, %0\n" \
+" blne " #fail \
+ : \
+ : "r" (ptr), "I" (RW_LOCK_BIAS) \
+ : "ip", "lr", "cc"); \
+ })
+
+/* Increments by RW_LOCK_BIAS, wakes if value >= 0 */
+#define __up_op_write(ptr,wake) \
+ ({ \
+ __asm__ __volatile__( \
+ "@ up_op_read\n" \
+" mov ip, pc\n" \
+" orr lr, ip, #0x08000000\n" \
+" teqp lr, #0\n" \
+\
+" ldr lr, [%0]\n" \
+" and ip, ip, #0x0c000003\n" \
+" adds lr, lr, %1\n" \
+" str lr, [%0]\n" \
+\
+" orrcs ip, ip, #0x20000000 @ set C\n" \
+" teqp ip, #0\n" \
+" movcs ip, %0\n" \
+" blcs " #wake \
+ : \
+ : "r" (ptr), "I" (RW_LOCK_BIAS) \
+ : "ip", "lr", "cc"); \
+ })
+
+#define __down_op_read(ptr,fail) \
+ __down_op(ptr, fail)
+
+#define __up_op_read(ptr,wake) \
+ ({ \
+ __asm__ __volatile__( \
+ "@ up_op_read\n" \
+" mov ip, pc\n" \
+" orr lr, ip, #0x08000000\n" \
+" teqp lr, #0\n" \
+\
+" ldr lr, [%0]\n" \
+" and ip, ip, #0x0c000003\n" \
+" adds lr, lr, %1\n" \
+" str lr, [%0]\n" \
+\
+" orreq ip, ip, #0x40000000 @ Set Z \n" \
+" teqp ip, #0\n" \
+" moveq ip, %0\n" \
+" bleq " #wake \
+ : \
+ : "r" (ptr), "I" (1) \
+ : "ip", "lr", "cc"); \
+ })
+
+#endif
diff --git a/include/asm-arm26/mach-types.h b/include/asm-arm26/mach-types.h
new file mode 100644
index 00000000000..b34045b7812
--- /dev/null
+++ b/include/asm-arm26/mach-types.h
@@ -0,0 +1,37 @@
+/*
+ * Unlike ARM32 this is NOT automatically generated. DONT delete it
+ * Instead, consider FIXME-ing it so its auto-detected.
+ */
+
+#ifndef __ASM_ARM_MACH_TYPE_H
+#define __ASM_ARM_MACH_TYPE_H
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+extern unsigned int __machine_arch_type;
+#endif
+
+#define MACH_TYPE_ARCHIMEDES 10
+#define MACH_TYPE_A5K 11
+
+#ifdef CONFIG_ARCH_ARC
+# define machine_arch_type MACH_TYPE_ARCHIMEDES
+# define machine_is_archimedes() (machine_arch_type == MACH_TYPE_ARCHIMEDES)
+#else
+# define machine_is_archimedes() (0)
+#endif
+
+#ifdef CONFIG_ARCH_A5K
+# define machine_arch_type MACH_TYPE_A5K
+# define machine_is_a5k() (machine_arch_type == MACH_TYPE_A5K)
+#else
+# define machine_is_a5k() (0)
+#endif
+
+#ifndef machine_arch_type
+#error Unknown machine type
+#define machine_arch_type __machine_arch_type
+#endif
+
+#endif
diff --git a/include/asm-arm26/map.h b/include/asm-arm26/map.h
new file mode 100644
index 00000000000..6e12a7fa5c5
--- /dev/null
+++ b/include/asm-arm26/map.h
@@ -0,0 +1,24 @@
+/*
+ * linux/include/asm-arm/map.h
+ *
+ * Copyright (C) 1999-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Page table mapping constructs and function prototypes
+ */
+struct map_desc {
+ unsigned long virtual;
+ unsigned long physical;
+ unsigned long length;
+ unsigned int type;
+};
+
+struct meminfo;
+
+extern void create_memmap_holes(struct meminfo *);
+extern void memtable_init(struct meminfo *);
+extern void iotable_init(struct map_desc *);
+extern void setup_io_desc(void);
diff --git a/include/asm-arm26/mc146818rtc.h b/include/asm-arm26/mc146818rtc.h
new file mode 100644
index 00000000000..a234130db8f
--- /dev/null
+++ b/include/asm-arm26/mc146818rtc.h
@@ -0,0 +1,28 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x) (0x70 + (x))
+#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/include/asm-arm26/memory.h b/include/asm-arm26/memory.h
new file mode 100644
index 00000000000..20d78616f65
--- /dev/null
+++ b/include/asm-arm26/memory.h
@@ -0,0 +1,101 @@
+/*
+ * linux/include/asm-arm26/memory.h
+ *
+ * Copyright (C) 2000-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Note: this file should not be included by non-asm/.h files
+ */
+#ifndef __ASM_ARM_MEMORY_H
+#define __ASM_ARM_MEMORY_H
+
+/*
+ * User space: 26MB
+ */
+#define TASK_SIZE (0x01a00000UL)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 3)
+
+/*
+ * Page offset: 32MB
+ */
+#define PAGE_OFFSET (0x02000000UL)
+#define PHYS_OFFSET (0x02000000UL)
+
+#define PHYS_TO_NID(addr) (0)
+
+/*
+ * PFNs are used to describe any physical page; this means
+ * PFN 0 == physical address 0.
+ *
+ * This is the PFN of the first RAM page in the kernel
+ * direct-mapped view. We assume this is the first page
+ * of RAM in the mem_map as well.
+ */
+#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT)
+
+/*
+ * These are *only* valid on the kernel direct mapped RAM memory.
+ */
+static inline unsigned long virt_to_phys(void *x)
+{
+ return (unsigned long)x;
+}
+
+static inline void *phys_to_virt(unsigned long x)
+{
+ return (void *)((unsigned long)x);
+}
+
+#define __pa(x) (unsigned long)(x)
+#define __va(x) ((void *)(unsigned long)(x))
+
+/*
+ * Virtual <-> DMA view memory address translations
+ * Again, these are *only* valid on the kernel direct mapped RAM
+ * memory. Use of these is *depreciated*.
+ */
+#define virt_to_bus(x) ((unsigned long)(x))
+#define bus_to_virt(x) ((void *)((unsigned long)(x)))
+
+/*
+ * Conversion between a struct page and a physical address.
+ *
+ * Note: when converting an unknown physical address to a
+ * struct page, the resulting pointer must be validated
+ * using VALID_PAGE(). It must return an invalid struct page
+ * for any physical address not corresponding to a system
+ * RAM address.
+ *
+ * page_to_pfn(page) convert a struct page * to a PFN number
+ * pfn_to_page(pfn) convert a _valid_ PFN number to struct page *
+ * pfn_valid(pfn) indicates whether a PFN number is valid
+ *
+ * virt_to_page(k) convert a _valid_ virtual address to struct page *
+ * virt_addr_valid(k) indicates whether a virtual address is valid
+ */
+#define page_to_pfn(page) (((page) - mem_map) + PHYS_PFN_OFFSET)
+#define pfn_to_page(pfn) ((mem_map + (pfn)) - PHYS_PFN_OFFSET)
+#define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
+
+#define virt_to_page(kaddr) (pfn_to_page(__pa(kaddr) >> PAGE_SHIFT))
+#define virt_addr_valid(kaddr) ((int)(kaddr) >= PAGE_OFFSET && (int)(kaddr) < (unsigned long)high_memory)
+
+/*
+ * For BIO. "will die". Kill me when bio_to_phys() and bvec_to_phys() die.
+ */
+#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * We should really eliminate virt_to_bus() here - it's depreciated.
+ */
+#define page_to_bus(page) (page_address(page))
+
+#endif
diff --git a/include/asm-arm26/mman.h b/include/asm-arm26/mman.h
new file mode 100644
index 00000000000..cc27b824026
--- /dev/null
+++ b/include/asm-arm26/mman.h
@@ -0,0 +1,43 @@
+#ifndef __ARM_MMAN_H__
+#define __ARM_MMAN_H__
+
+#define PROT_READ 0x1 /* page can be read */
+#define PROT_WRITE 0x2 /* page can be written */
+#define PROT_EXEC 0x4 /* page can be executed */
+#define PROT_SEM 0x8 /* page may be used for atomic ops */
+#define PROT_NONE 0x0 /* page can not be accessed */
+#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED 0x01 /* Share changes */
+#define MAP_PRIVATE 0x02 /* Changes are private */
+#define MAP_TYPE 0x0f /* Mask for type of mapping */
+#define MAP_FIXED 0x10 /* Interpret addr exactly */
+#define MAP_ANONYMOUS 0x20 /* don't use a file */
+
+#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+#define MAP_LOCKED 0x2000 /* pages are locked */
+#define MAP_NORESERVE 0x4000 /* don't check for reservations */
+#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */
+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+
+#define MS_ASYNC 1 /* sync memory asynchronously */
+#define MS_INVALIDATE 2 /* invalidate the caches */
+#define MS_SYNC 4 /* synchronous memory sync */
+
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+#define MADV_NORMAL 0x0 /* default page-in behavior */
+#define MADV_RANDOM 0x1 /* page-in minimum required */
+#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */
+#define MADV_WILLNEED 0x3 /* pre-fault pages */
+#define MADV_DONTNEED 0x4 /* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON MAP_ANONYMOUS
+#define MAP_FILE 0
+
+#endif /* __ARM_MMAN_H__ */
diff --git a/include/asm-arm26/mmu.h b/include/asm-arm26/mmu.h
new file mode 100644
index 00000000000..9b8d3d781a1
--- /dev/null
+++ b/include/asm-arm26/mmu.h
@@ -0,0 +1,9 @@
+#ifndef __ARM_MMU_H
+#define __ARM_MMU_H
+
+/*
+ * The ARM doesn't have a mmu context
+ */
+typedef struct { } mm_context_t;
+
+#endif
diff --git a/include/asm-arm26/mmu_context.h b/include/asm-arm26/mmu_context.h
new file mode 100644
index 00000000000..1a929bfe5c3
--- /dev/null
+++ b/include/asm-arm26/mmu_context.h
@@ -0,0 +1,51 @@
+/*
+ * linux/include/asm-arm/mmu_context.h
+ *
+ * Copyright (C) 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 27-06-1996 RMK Created
+ */
+#ifndef __ASM_ARM_MMU_CONTEXT_H
+#define __ASM_ARM_MMU_CONTEXT_H
+
+#define init_new_context(tsk,mm) 0
+#define destroy_context(mm) do { } while(0)
+
+/*
+ * This is called when "tsk" is about to enter lazy TLB mode.
+ *
+ * mm: describes the currently active mm context
+ * tsk: task which is entering lazy tlb
+ * cpu: cpu number which is entering lazy tlb
+ *
+ * tsk->mm will be NULL
+ */
+static inline void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * This is the actual mm switch as far as the scheduler
+ * is concerned. No registers are touched.
+ */
+static inline void
+switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ cpu_switch_mm(next->pgd, next);
+}
+
+#define deactivate_mm(tsk,mm) do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+ cpu_switch_mm(next->pgd, next);
+}
+
+#endif
diff --git a/include/asm-arm26/module.h b/include/asm-arm26/module.h
new file mode 100644
index 00000000000..1157f178dae
--- /dev/null
+++ b/include/asm-arm26/module.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_ARM_MODULE_H
+#define _ASM_ARM_MODULE_H
+/*
+ * This file contains the arm architecture specific module code.
+ */
+
+#endif /* _ASM_ARM_MODULE_H */
diff --git a/include/asm-arm26/msgbuf.h b/include/asm-arm26/msgbuf.h
new file mode 100644
index 00000000000..33b35b946ea
--- /dev/null
+++ b/include/asm-arm26/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _ASMARM_MSGBUF_H
+#define _ASMARM_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ unsigned long __unused1;
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ unsigned long __unused2;
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned long __unused3;
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* _ASMARM_MSGBUF_H */
diff --git a/include/asm-arm26/namei.h b/include/asm-arm26/namei.h
new file mode 100644
index 00000000000..a402d3b9d0f
--- /dev/null
+++ b/include/asm-arm26/namei.h
@@ -0,0 +1,25 @@
+/*
+ * linux/include/asm-arm/namei.h
+ *
+ * Routines to handle famous /usr/gnemul
+ * Derived from the Sparc version of this file
+ *
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __ASMARM_NAMEI_H
+#define __ASMARM_NAMEI_H
+
+#define ARM_BSD_EMUL "usr/gnemul/bsd/"
+
+static inline char *__emul_prefix(void)
+{
+ switch (current->personality) {
+ case PER_BSD:
+ return ARM_BSD_EMUL;
+ default:
+ return NULL;
+ }
+}
+
+#endif /* __ASMARM_NAMEI_H */
diff --git a/include/asm-arm26/oldlatches.h b/include/asm-arm26/oldlatches.h
new file mode 100644
index 00000000000..bc87089b215
--- /dev/null
+++ b/include/asm-arm26/oldlatches.h
@@ -0,0 +1,37 @@
+/*
+ * linux/include/asm-arm/arch-arc/oldlatches.h
+ *
+ * Copyright (C) 1996 Russell King, Dave Gilbert
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 04-04-1998 PJB/RMK Merged arc and a5k versions
+ */
+#ifndef _ASM_ARCH_OLDLATCH_H
+#define _ASM_ARCH_OLDLATCH_H
+
+#define LATCHA_FDSEL0 (1<<0)
+#define LATCHA_FDSEL1 (1<<1)
+#define LATCHA_FDSEL2 (1<<2)
+#define LATCHA_FDSEL3 (1<<3)
+#define LATCHA_FDSELALL (0xf)
+#define LATCHA_SIDESEL (1<<4)
+#define LATCHA_MOTOR (1<<5)
+#define LATCHA_INUSE (1<<6)
+#define LATCHA_CHANGERST (1<<7)
+
+#define LATCHB_FDCDENSITY (1<<1)
+#define LATCHB_FDCRESET (1<<3)
+#define LATCHB_PRINTSTROBE (1<<4)
+
+/* newval=(oldval & mask)|newdata */
+void oldlatch_bupdate(unsigned char mask,unsigned char newdata);
+
+/* newval=(oldval & mask)|newdata */
+void oldlatch_aupdate(unsigned char mask,unsigned char newdata);
+
+#endif
+
diff --git a/include/asm-arm26/page.h b/include/asm-arm26/page.h
new file mode 100644
index 00000000000..c334079b082
--- /dev/null
+++ b/include/asm-arm26/page.h
@@ -0,0 +1,115 @@
+#ifndef _ASMARM_PAGE_H
+#define _ASMARM_PAGE_H
+
+#include <linux/config.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+extern void __clear_user_page(void *p, unsigned long user);
+extern void __copy_user_page(void *to, const void *from, unsigned long user);
+extern void copy_page(void *to, const void *from);
+
+//FIXME these may be wrong on ARM26
+#define clear_user_page(addr,vaddr,pg) \
+ do { \
+ preempt_disable(); \
+ __clear_user_page(addr, vaddr); \
+ preempt_enable(); \
+ } while (0)
+
+#define copy_user_page(to,from,vaddr,pg) \
+ do { \
+ preempt_disable(); \
+ __copy_user_page(to, from, vaddr); \
+ preempt_enable(); \
+ } while (0)
+
+#define clear_page(page) memzero((void *)(page), PAGE_SIZE)
+#define copy_page(to, from) __copy_user_page(to, from, 0);
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pgd_val(x) ((x).pgd)
+#define pte_val(x) ((x).pte)
+#define pmd_val(x) ((x).pmd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pgprot(x) ((pgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pgd_t;
+typedef unsigned long pte_t;
+typedef unsigned long pmd_t;
+typedef unsigned long pgprot_t;
+
+//FIXME - should these cast to unsigned long?
+#define pgd_val(x) (x)
+#define pte_val(x) (x)
+#define pmd_val(x) (x)
+#define pgprot_val(x) (x)
+
+#define __pte(x) (x)
+#define __pmd(x) (x)
+#define __pgprot(x) (x)
+
+#endif /* STRICT_MM_TYPECHECKS */
+#endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+/* PAGE_SHIFT determines the page size. This is configurable. */
+#if defined(CONFIG_PAGESIZE_16)
+#define PAGE_SHIFT 14 /* 16K */
+#else /* default */
+#define PAGE_SHIFT 15 /* 32K */
+#endif
+
+#define EXEC_PAGESIZE 32768
+
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK)
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size)
+{
+ int order;
+
+ size = (size-1) >> (PAGE_SHIFT-1);
+ order = -1;
+ do {
+ size >>= 1;
+ order++;
+ } while (size);
+ return order;
+}
+
+#include <asm/memory.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-arm26/param.h b/include/asm-arm26/param.h
new file mode 100644
index 00000000000..6b1e52df542
--- /dev/null
+++ b/include/asm-arm26/param.h
@@ -0,0 +1,33 @@
+/*
+ * linux/include/asm-arm/param.h
+ *
+ * Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PARAM_H
+#define __ASM_PARAM_H
+
+#ifndef __KERNEL_HZ
+#define __KERNEL_HZ 100
+#endif
+
+#ifdef __KERNEL__
+# define HZ __KERNEL_HZ /* Internal kernel timer frequency */
+# define USER_HZ 100 /* User interfaces are in "ticks" */
+# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
+#else
+# define HZ 100
+#endif
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+/* max length of hostname */
+#define MAXHOSTNAMELEN 64
+
+#endif
+
diff --git a/include/asm-arm26/parport.h b/include/asm-arm26/parport.h
new file mode 100644
index 00000000000..f2f90c76ddd
--- /dev/null
+++ b/include/asm-arm26/parport.h
@@ -0,0 +1,18 @@
+/*
+ * linux/include/asm-arm/parport.h: ARM-specific parport initialisation
+ *
+ * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef __ASMARM_PARPORT_H
+#define __ASMARM_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+ return parport_pc_find_isa_ports (autoirq, autodma);
+}
+
+#endif /* !(_ASMARM_PARPORT_H) */
diff --git a/include/asm-arm26/pci.h b/include/asm-arm26/pci.h
new file mode 100644
index 00000000000..6ac67ed7718
--- /dev/null
+++ b/include/asm-arm26/pci.h
@@ -0,0 +1,6 @@
+/* Should not be needed. IDE stupidity */
+/* JMA 18.05.03 - is kinda needed, if only to tell it we don't have a PCI bus */
+
+#define PCI_DMA_BUS_IS_PHYS 0
+#define pcibios_scan_all_fns(a, b) 0
+
diff --git a/include/asm-arm26/percpu.h b/include/asm-arm26/percpu.h
new file mode 100644
index 00000000000..b4e32d8ec07
--- /dev/null
+++ b/include/asm-arm26/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARM_PERCPU
+#define __ARM_PERCPU
+
+#include <asm-generic/percpu.h>
+
+#endif
diff --git a/include/asm-arm26/pgalloc.h b/include/asm-arm26/pgalloc.h
new file mode 100644
index 00000000000..6437167b1ff
--- /dev/null
+++ b/include/asm-arm26/pgalloc.h
@@ -0,0 +1,70 @@
+/*
+ * linux/include/asm-arm/pgalloc.h
+ *
+ * Copyright (C) 2000-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGALLOC_H
+#define _ASMARM_PGALLOC_H
+
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <linux/slab.h>
+
+extern kmem_cache_t *pte_cache;
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr){
+ return kmem_cache_alloc(pte_cache, GFP_KERNEL);
+}
+
+static inline void pte_free_kernel(pte_t *pte){
+ if (pte)
+ kmem_cache_free(pte_cache, pte);
+}
+
+/*
+ * Populate the pmdp entry with a pointer to the pte. This pmd is part
+ * of the mm address space.
+ *
+ * If 'mm' is the init tasks mm, then we are doing a vmalloc, and we
+ * need to set stuff up correctly for it.
+ */
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
+{
+//FIXME - is this doing the right thing?
+ set_pmd(pmdp, (unsigned long)ptep | 1/*FIXME _PMD_PRESENT*/);
+}
+
+/*
+ * FIXME - We use the old 2.5.5-rmk1 hack for this.
+ * This is not truly correct, but should be functional.
+ */
+#define pte_alloc_one(mm,addr) ((struct page *)pte_alloc_one_kernel(mm,addr))
+#define pte_free(pte) pte_free_kernel((pte_t *)pte)
+#define pmd_populate(mm,pmdp,ptep) pmd_populate_kernel(mm,pmdp,(pte_t *)ptep)
+
+/*
+ * Since we have only two-level page tables, these are trivial
+ *
+ * trick __pmd_alloc into optimising away. The actual value is irrelevant though as it
+ * is thrown away. It just cant be zero. -IM
+ */
+
+#define pmd_alloc_one(mm,addr) ({ BUG(); ((pmd_t *)2); })
+#define pmd_free(pmd) do { } while (0)
+#define pgd_populate(mm,pmd,pte) BUG()
+
+extern pgd_t *get_pgd_slow(struct mm_struct *mm);
+extern void free_pgd_slow(pgd_t *pgd);
+
+#define pgd_alloc(mm) get_pgd_slow(mm)
+#define pgd_free(pgd) free_pgd_slow(pgd)
+
+#define check_pgt_cache() do { } while (0)
+
+#endif
diff --git a/include/asm-arm26/pgtable.h b/include/asm-arm26/pgtable.h
new file mode 100644
index 00000000000..af0b8907dc1
--- /dev/null
+++ b/include/asm-arm26/pgtable.h
@@ -0,0 +1,305 @@
+/*
+ * linux/include/asm-arm26/pgtable.h
+ *
+ * Copyright (C) 2000-2002 Russell King
+ * Copyright (C) 2003 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGTABLE_H
+#define _ASMARM_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/config.h>
+#include <asm/memory.h>
+
+/*
+ * The table below defines the page protection levels that we insert into our
+ * Linux page table version. These get translated into the best that the
+ * architecture can perform. Note that on most ARM hardware:
+ * 1) We cannot do execute protection
+ * 2) If we could do execute protection, then read is implied
+ * 3) write implies read permissions
+ */
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY
+#define __P010 PAGE_COPY
+#define __P011 PAGE_COPY
+#define __P100 PAGE_READONLY
+#define __P101 PAGE_READONLY
+#define __P110 PAGE_COPY
+#define __P111 PAGE_COPY
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY
+#define __S010 PAGE_SHARED
+#define __S011 PAGE_SHARED
+#define __S100 PAGE_READONLY
+#define __S101 PAGE_READONLY
+#define __S110 PAGE_SHARED
+#define __S111 PAGE_SHARED
+
+/*
+ * PMD_SHIFT determines the size of the area a second-level page table can map
+ * PGDIR_SHIFT determines what a third-level page table entry can map
+ */
+#define PGD_SHIFT 25
+#define PMD_SHIFT 20
+
+#define PGD_SIZE (1UL << PGD_SHIFT)
+#define PGD_MASK (~(PGD_SIZE-1))
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE-1))
+
+/* The kernel likes to use these names for the above (ick) */
+#define PGDIR_SIZE PGD_SIZE
+#define PGDIR_MASK PGD_MASK
+
+#define PTRS_PER_PGD 32
+#define PTRS_PER_PMD 1
+#define PTRS_PER_PTE 32
+
+#define FIRST_USER_PGD_NR 1
+#define USER_PTRS_PER_PGD ((TASK_SIZE/PGD_SIZE) - FIRST_USER_PGD_NR)
+
+// FIXME - WTF?
+#define LIBRARY_TEXT_START 0x0c000000
+
+
+
+#ifndef __ASSEMBLY__
+extern void __pte_error(const char *file, int line, unsigned long val);
+extern void __pmd_error(const char *file, int line, unsigned long val);
+extern void __pgd_error(const char *file, int line, unsigned long val);
+
+#define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte_val(pte))
+#define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd_val(pmd))
+#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd_val(pgd))
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr) (empty_zero_page)
+
+#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
+#define pte_page(pte) (pfn_to_page(pte_pfn(pte)))
+#define pfn_pte(pfn,prot) (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT))
+#define mk_pte(page,prot) pfn_pte(page_to_pfn(page),prot)
+#define page_pte_prot(page,prot) mk_pte(page, prot)
+#define page_pte(page) mk_pte(page, __pgprot(0))
+
+/*
+ * Terminology: PGD = Page Directory, PMD = Page Middle Directory,
+ * PTE = Page Table Entry
+ *
+ * on arm26 we have no 2nd level page table. we simulate this by removing the
+ * PMD.
+ *
+ * pgd_none is 0 to prevernt pmd_alloc() calling __pmd_alloc(). This causes it
+ * to return pmd_offset(pgd,addr) which is a pointer to the pgd (IOW, a no-op).
+ *
+ * however, to work this way, whilst we are allocating 32 pgds, containing 32
+ * PTEs, the actual work is done on the PMDs, thus:
+ *
+ * instead of mm->pgd->pmd->pte
+ * we have mm->pgdpmd->pte
+ *
+ * IOW, think of PGD operations and PMD ones as being the same thing, just
+ * that PGD stuff deals with the mm_struct side of things, wheras PMD stuff
+ * deals with the pte side of things.
+ *
+ * additionally, we store some bits in the PGD and PTE pointers:
+ * PGDs:
+ * o The lowest (1) bit of the PGD is to determine if it is present or swap.
+ * o The 2nd bit of the PGD is unused and must be zero.
+ * o The top 6 bits of the PGD must be zero.
+ * PTEs:
+ * o The lower 5 bits of a pte are flags. bit 1 is the 'present' flag. The
+ * others determine the pages attributes.
+ *
+ * the pgd_val, pmd_val, and pte_val macros seem to be private to our code.
+ * They get the RAW value of the PGD/PMD/PTE entry, including our flags
+ * encoded into the pointers.
+ *
+ * The pgd_offset, pmd_offset, and pte_offset macros are used by the kernel,
+ * so they shouldnt have our flags attached.
+ *
+ * If you understood that, feel free to explain it to me...
+ *
+ */
+
+#define _PMD_PRESENT (0x01)
+
+/* These definitions allow us to optimise out stuff like pmd_alloc() */
+#define pgd_none(pgd) (0)
+#define pgd_bad(pgd) (0)
+#define pgd_present(pgd) (1)
+#define pgd_clear(pgdp) do { } while (0)
+
+/* Whilst these handle our actual 'page directory' (the agglomeration of pgd and pmd)
+ */
+#define pmd_none(pmd) (!pmd_val(pmd))
+#define pmd_bad(pmd) ((pmd_val(pmd) & 0xfc000002))
+#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT)
+#define set_pmd(pmd_ptr, pmd) ((*(pmd_ptr)) = (pmd))
+#define pmd_clear(pmdp) set_pmd(pmdp, __pmd(0))
+
+/* and these handle our pte tables */
+#define pte_none(pte) (!pte_val(pte))
+#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
+#define set_pte(pte_ptr, pte) ((*(pte_ptr)) = (pte))
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+#define pte_clear(mm,addr,ptep) set_pte_at((mm),(addr),(ptep), __pte(0))
+
+/* macros to ease the getting of pointers to stuff... */
+#define pgd_offset(mm, addr) ((pgd_t *)(mm)->pgd + __pgd_index(addr))
+#define pmd_offset(pgd, addr) ((pmd_t *)(pgd))
+#define pte_offset(pmd, addr) ((pte_t *)pmd_page(*(pmd)) + __pte_index(addr))
+
+/* there is no __pmd_index as we dont use pmds */
+#define __pgd_index(addr) ((addr) >> PGD_SHIFT)
+#define __pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+
+/* Keep the kernel happy */
+#define pgd_index(addr) __pgd_index(addr)
+#define pgd_offset_k(addr) (pgd_offset(&init_mm, addr))
+
+/*
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;) FIXME: surely 1 page not 4k ?
+ */
+#define VMALLOC_START 0x01a00000
+#define VMALLOC_END 0x01c00000
+
+/* Is pmd_page supposed to return a pointer to a page in some arches? ours seems to
+ * return a pointer to memory (no special alignment)
+ */
+#define pmd_page(pmd) ((struct page *)(pmd_val((pmd)) & ~_PMD_PRESENT))
+#define pmd_page_kernel(pmd) ((pte_t *)(pmd_val((pmd)) & ~_PMD_PRESENT))
+
+#define pte_offset_kernel(dir,addr) (pmd_page_kernel(*(dir)) + __pte_index(addr))
+
+#define pte_offset_map(dir,addr) (pmd_page_kernel(*(dir)) + __pte_index(addr))
+#define pte_offset_map_nested(dir,addr) (pmd_page_kernel(*(dir)) + __pte_index(addr))
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+
+
+#define _PAGE_PRESENT 0x01
+#define _PAGE_READONLY 0x02
+#define _PAGE_NOT_USER 0x04
+#define _PAGE_OLD 0x08
+#define _PAGE_CLEAN 0x10
+
+// an old page has never been read.
+// a clean page has never been written.
+
+/* -- present -- -- !dirty -- --- !write --- ---- !user --- */
+#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY | _PAGE_NOT_USER)
+#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_CLEAN )
+#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY )
+#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY )
+#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_NOT_USER)
+
+#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_OLD | _PAGE_CLEAN)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_read(pte) (!(pte_val(pte) & _PAGE_NOT_USER))
+#define pte_write(pte) (!(pte_val(pte) & _PAGE_READONLY))
+#define pte_exec(pte) (!(pte_val(pte) & _PAGE_NOT_USER))
+#define pte_dirty(pte) (!(pte_val(pte) & _PAGE_CLEAN))
+#define pte_young(pte) (!(pte_val(pte) & _PAGE_OLD))
+//ONLY when !pte_present() I think. nicked from arm32 (FIXME!)
+#define pte_file(pte) (!(pte_val(pte) & _PAGE_OLD))
+
+#define PTE_BIT_FUNC(fn,op) \
+static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+
+PTE_BIT_FUNC(wrprotect, |= _PAGE_READONLY);
+PTE_BIT_FUNC(mkwrite, &= ~_PAGE_READONLY);
+PTE_BIT_FUNC(exprotect, |= _PAGE_NOT_USER);
+PTE_BIT_FUNC(mkexec, &= ~_PAGE_NOT_USER);
+PTE_BIT_FUNC(mkclean, |= _PAGE_CLEAN);
+PTE_BIT_FUNC(mkdirty, &= ~_PAGE_CLEAN);
+PTE_BIT_FUNC(mkold, |= _PAGE_OLD);
+PTE_BIT_FUNC(mkyoung, &= ~_PAGE_OLD);
+
+/*
+ * We don't store cache state bits in the page table here. FIXME - or do we?
+ */
+#define pgprot_noncached(prot) (prot)
+#define pgprot_writecombine(prot) (prot) //FIXME - is a no-op?
+
+extern void pgtable_cache_init(void);
+
+//FIXME - nicked from arm32 and brutally hacked. probably wrong.
+#define pte_to_pgoff(x) (pte_val(x) >> 2)
+#define pgoff_to_pte(x) __pte(((x) << 2) & ~_PAGE_OLD)
+
+//FIXME - next line borrowed from arm32. is it right?
+#define PTE_FILE_MAX_BITS 30
+
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+ return pte;
+}
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/* Encode and decode a swap entry.
+ *
+ * We support up to 32GB of swap on 4k machines
+ */
+#define __swp_type(x) (((x).val >> 2) & 0x7f)
+#define __swp_offset(x) ((x).val >> 9)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val })
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+/* FIXME: this is not correct */
+#define kern_addr_valid(addr) (1)
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot)
+{
+ pte_t pte;
+ pte_val(pte) = physpage | pgprot_val(pgprot);
+ return pte;
+}
+
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * remap a physical address `phys' of size `size' with page protection `prot'
+ * into virtual address `from'
+ */
+#define io_remap_page_range(vma,from,phys,size,prot) \
+ remap_pfn_range(vma, from, (phys) >> PAGE_SHIFT, size, prot)
+
+#define io_remap_pfn_range(vma,from,pfn,size,prot) \
+ remap_pfn_range(vma, from, pfn, size, prot)
+
+#define MK_IOSPACE_PFN(space, pfn) (pfn)
+#define GET_IOSPACE(pfn) 0
+#define GET_PFN(pfn) (pfn)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASMARM_PGTABLE_H */
diff --git a/include/asm-arm26/poll.h b/include/asm-arm26/poll.h
new file mode 100644
index 00000000000..fdfdab064a6
--- /dev/null
+++ b/include/asm-arm26/poll.h
@@ -0,0 +1,25 @@
+#ifndef __ASMARM_POLL_H
+#define __ASMARM_POLL_H
+
+/* These are specified by iBCS2 */
+#define POLLIN 0x0001
+#define POLLPRI 0x0002
+#define POLLOUT 0x0004
+#define POLLERR 0x0008
+#define POLLHUP 0x0010
+#define POLLNVAL 0x0020
+
+/* The rest seem to be more-or-less nonstandard. Check them! */
+#define POLLRDNORM 0x0040
+#define POLLRDBAND 0x0080
+#define POLLWRNORM 0x0100
+#define POLLWRBAND 0x0200
+#define POLLMSG 0x0400
+
+struct pollfd {
+ int fd;
+ short events;
+ short revents;
+};
+
+#endif
diff --git a/include/asm-arm26/posix_types.h b/include/asm-arm26/posix_types.h
new file mode 100644
index 00000000000..b88344ad390
--- /dev/null
+++ b/include/asm-arm26/posix_types.h
@@ -0,0 +1,80 @@
+/*
+ * linux/include/asm-arm/posix_types.h
+ *
+ * Copyright (C) 1996-1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 27-06-1996 RMK Created
+ */
+#ifndef __ARCH_ARM_POSIX_TYPES_H
+#define __ARCH_ARM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+ int val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+ int __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+#define __FD_SET(fd, fdsetp) \
+ (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] |= (1<<((fd) & 31)))
+
+#undef __FD_CLR
+#define __FD_CLR(fd, fdsetp) \
+ (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] &= ~(1<<((fd) & 31)))
+
+#undef __FD_ISSET
+#define __FD_ISSET(fd, fdsetp) \
+ ((((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] & (1<<((fd) & 31))) != 0)
+
+#undef __FD_ZERO
+#define __FD_ZERO(fdsetp) \
+ (memset ((fdsetp), 0, sizeof (*(fd_set *)(fdsetp))))
+
+#endif
+
+#endif
diff --git a/include/asm-arm26/proc-fns.h b/include/asm-arm26/proc-fns.h
new file mode 100644
index 00000000000..a8310045405
--- /dev/null
+++ b/include/asm-arm26/proc-fns.h
@@ -0,0 +1,49 @@
+/*
+ * linux/include/asm-arm26/proc-fns.h
+ *
+ * Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASSEMBLY__
+
+#include <asm/page.h>
+
+/*
+ * Don't change this structure - ASM code
+ * relies on it.
+ */
+extern struct processor {
+ /* check for any bugs */
+ void (*_check_bugs)(void);
+ /* Set up any processor specifics */
+ void (*_proc_init)(void);
+ /* Disable any processor specifics */
+ void (*_proc_fin)(void);
+ /* set the MEMC hardware mappings */
+ void (*_set_pgd)(pgd_t *pgd);
+ /* XCHG */
+ unsigned long (*_xchg_1)(unsigned long x, volatile void *ptr);
+ unsigned long (*_xchg_4)(unsigned long x, volatile void *ptr);
+} processor;
+
+extern const struct processor arm2_processor_functions;
+extern const struct processor arm250_processor_functions;
+extern const struct processor arm3_processor_functions;
+
+#define cpu_check_bugs() processor._check_bugs()
+#define cpu_proc_init() processor._proc_init()
+#define cpu_proc_fin() processor._proc_fin()
+#define cpu_do_idle() do { } while (0)
+#define cpu_switch_mm(pgd,mm) processor._set_pgd(pgd)
+#define cpu_xchg_1(x,ptr) processor._xchg_1(x,ptr)
+#define cpu_xchg_4(x,ptr) processor._xchg_4(x,ptr)
+
+
+//FIXME - these shouldnt be in proc-fn.h
+extern void cpu_memc_update_all(pgd_t *pgd);
+extern void cpu_memc_update_entry(pgd_t *pgd, unsigned long phys_pte, unsigned long log_addr);
+
+#endif
diff --git a/include/asm-arm26/processor.h b/include/asm-arm26/processor.h
new file mode 100644
index 00000000000..1d2d5f7b467
--- /dev/null
+++ b/include/asm-arm26/processor.h
@@ -0,0 +1,113 @@
+/*
+ * linux/include/asm-arm26/processor.h
+ *
+ * Copyright (C) 1995 Russell King
+ * Copyright (C) 2003 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_PROCESSOR_H
+#define __ASM_ARM_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#ifdef __KERNEL__
+
+#include <asm/atomic.h>
+#include <asm/ptrace.h>
+#include <linux/string.h>
+
+#define KERNEL_STACK_SIZE 4096
+
+typedef struct {
+ void (*put_byte)(void); /* Special calling convention */
+ void (*get_byte)(void); /* Special calling convention */
+ void (*put_half)(void); /* Special calling convention */
+ void (*get_half)(void); /* Special calling convention */
+ void (*put_word)(void); /* Special calling convention */
+ void (*get_word)(void); /* Special calling convention */
+ void (*put_dword)(void); /* Special calling convention */
+ unsigned long (*copy_from_user)(void *to, const void *from, unsigned long sz);
+ unsigned long (*copy_to_user)(void *to, const void *from, unsigned long sz);
+ unsigned long (*clear_user)(void *addr, unsigned long sz);
+ unsigned long (*strncpy_from_user)(char *to, const char *from, unsigned long sz);
+ unsigned long (*strnlen_user)(const char *s, long n);
+} uaccess_t;
+
+extern uaccess_t uaccess_user, uaccess_kernel;
+
+#define EXTRA_THREAD_STRUCT \
+ uaccess_t *uaccess; /* User access functions*/
+
+#define EXTRA_THREAD_STRUCT_INIT \
+ .uaccess = &uaccess_kernel,
+
+// FIXME?!!
+
+#define start_thread(regs,pc,sp) \
+({ \
+ unsigned long *stack = (unsigned long *)sp; \
+ set_fs(USER_DS); \
+ memzero(regs->uregs, sizeof (regs->uregs)); \
+ regs->ARM_pc = pc | ~0xfc000003; /* pc */ \
+ regs->ARM_sp = sp; /* sp */ \
+ regs->ARM_r2 = stack[2]; /* r2 (envp) */ \
+ regs->ARM_r1 = stack[1]; /* r1 (argv) */ \
+ regs->ARM_r0 = stack[0]; /* r0 (argc) */ \
+})
+
+#define KSTK_EIP(tsk) (((unsigned long *)(4096+(unsigned long)(tsk)))[1020])
+#define KSTK_ESP(tsk) (((unsigned long *)(4096+(unsigned long)(tsk)))[1018])
+
+struct debug_entry {
+ u32 address;
+ u32 insn;
+};
+
+struct debug_info {
+ int nsaved;
+ struct debug_entry bp[2];
+};
+
+struct thread_struct {
+ /* fault info */
+ unsigned long address;
+ unsigned long trap_no;
+ unsigned long error_code;
+ /* debugging */
+ struct debug_info debug;
+ EXTRA_THREAD_STRUCT
+};
+
+#define INIT_THREAD { \
+EXTRA_THREAD_STRUCT_INIT \
+}
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define cpu_relax() barrier()
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while (0)
+
+/*
+ * Create a new kernel thread
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+#endif
+
+#endif /* __ASM_ARM_PROCESSOR_H */
diff --git a/include/asm-arm26/procinfo.h b/include/asm-arm26/procinfo.h
new file mode 100644
index 00000000000..b28624db69f
--- /dev/null
+++ b/include/asm-arm26/procinfo.h
@@ -0,0 +1,56 @@
+/*
+ * linux/include/asm-arm/procinfo.h
+ *
+ * Copyright (C) 1996-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROCINFO_H
+#define __ASM_PROCINFO_H
+
+#ifndef __ASSEMBLY__
+
+//struct processor;
+//struct cpu_user_fns;
+
+struct proc_info_item {
+ const char *manufacturer;
+ const char *cpu_name;
+};
+
+/*
+ * Note! struct processor is always defined if we're
+ * using MULTI_CPU, otherwise this entry is unused,
+ * but still exists.
+ *
+ * NOTE! The following structure is defined by assembly
+ * language, NOT C code. For more information, check:
+ * arch/arm/mm/proc-*.S and arch/arm/kernel/head-armv.S
+ */
+struct proc_info_list {
+ unsigned int cpu_val;
+ unsigned int cpu_mask;
+ const char *arch_name;
+ const char *elf_name;
+ unsigned int elf_hwcap;
+ struct proc_info_item *info;
+ struct processor *proc;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define PROC_INFO_SZ 48
+
+#define HWCAP_SWP 1
+#define HWCAP_HALF 2
+#define HWCAP_THUMB 4
+#define HWCAP_26BIT 8 /* Play it safe */
+#define HWCAP_FAST_MULT 16
+#define HWCAP_FPA 32
+#define HWCAP_VFP 64
+#define HWCAP_EDSP 128
+#define HWCAP_JAVA 256
+
+#endif
diff --git a/include/asm-arm26/ptrace.h b/include/asm-arm26/ptrace.h
new file mode 100644
index 00000000000..6a46b5ae115
--- /dev/null
+++ b/include/asm-arm26/ptrace.h
@@ -0,0 +1,104 @@
+#ifndef __ASM_ARM_PTRACE_H
+#define __ASM_ARM_PTRACE_H
+
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+#define PTRACE_OLDSETOPTIONS 21
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD 0x00000001
+
+#define MODE_USR26 0x00000000
+#define MODE_FIQ26 0x00000001
+#define MODE_IRQ26 0x00000002
+#define MODE_SVC26 0x00000003
+#define MODE_MASK 0x00000003
+
+#define PSR_F_BIT 0x04000000
+#define PSR_I_BIT 0x08000000
+#define PSR_V_BIT 0x10000000
+#define PSR_C_BIT 0x20000000
+#define PSR_Z_BIT 0x40000000
+#define PSR_N_BIT 0x80000000
+
+#define PCMASK 0xfc000003
+
+
+#ifndef __ASSEMBLY__
+
+#define pc_pointer(v) ((v) & ~PCMASK) /* convert v to pc type address */
+#define instruction_pointer(regs) (pc_pointer((regs)->ARM_pc)) /* get pc */
+#define profile_pc(regs) instruction_pointer(regs)
+
+/* this struct defines the way the registers are stored on the
+ stack during a system call. */
+
+struct pt_regs {
+ long uregs[17];
+};
+
+#define ARM_pc uregs[15]
+#define ARM_lr uregs[14]
+#define ARM_sp uregs[13]
+#define ARM_ip uregs[12]
+#define ARM_fp uregs[11]
+#define ARM_r10 uregs[10]
+#define ARM_r9 uregs[9]
+#define ARM_r8 uregs[8]
+#define ARM_r7 uregs[7]
+#define ARM_r6 uregs[6]
+#define ARM_r5 uregs[5]
+#define ARM_r4 uregs[4]
+#define ARM_r3 uregs[3]
+#define ARM_r2 uregs[2]
+#define ARM_r1 uregs[1]
+#define ARM_r0 uregs[0]
+#define ARM_ORIG_r0 uregs[16]
+
+#ifdef __KERNEL__
+
+#define processor_mode(regs) \
+ ((regs)->ARM_pc & MODE_MASK)
+
+#define user_mode(regs) \
+ (processor_mode(regs) == MODE_USR26)
+
+#define interrupts_enabled(regs) \
+ (!((regs)->ARM_pc & PSR_I_BIT))
+
+#define fast_interrupts_enabled(regs) \
+ (!((regs)->ARM_pc & PSR_F_BIT))
+
+#define condition_codes(regs) \
+ ((regs)->ARM_pc & (PSR_V_BIT|PSR_C_BIT|PSR_Z_BIT|PSR_N_BIT))
+
+/* Are the current registers suitable for user mode?
+ * (used to maintain security in signal handlers)
+ */
+static inline int valid_user_regs(struct pt_regs *regs)
+{
+ if (user_mode(regs) &&
+ (regs->ARM_pc & (PSR_F_BIT | PSR_I_BIT)) == 0)
+ return 1;
+
+ /*
+ * force it to be something sensible
+ */
+ regs->ARM_pc &= ~(MODE_MASK | PSR_F_BIT | PSR_I_BIT);
+
+ return 0;
+}
+
+extern void show_regs(struct pt_regs *);
+
+#define predicate(x) (x & 0xf0000000)
+#define PREDICATE_ALWAYS 0xe0000000
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif
+
diff --git a/include/asm-arm26/resource.h b/include/asm-arm26/resource.h
new file mode 100644
index 00000000000..734b581b5b6
--- /dev/null
+++ b/include/asm-arm26/resource.h
@@ -0,0 +1,6 @@
+#ifndef _ARM_RESOURCE_H
+#define _ARM_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif
diff --git a/include/asm-arm26/scatterlist.h b/include/asm-arm26/scatterlist.h
new file mode 100644
index 00000000000..d9c056c7784
--- /dev/null
+++ b/include/asm-arm26/scatterlist.h
@@ -0,0 +1,26 @@
+#ifndef _ASMARM_SCATTERLIST_H
+#define _ASMARM_SCATTERLIST_H
+
+#include <asm/types.h>
+
+struct scatterlist {
+ struct page *page; /* buffer page */
+ unsigned int offset; /* buffer offset */
+ dma_addr_t dma_address; /* dma address */
+ unsigned int length; /* length */
+ char *__address; /* for set_dma_addr */
+};
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0xffffffff)
+
+#endif /* _ASMARM_SCATTERLIST_H */
diff --git a/include/asm-arm26/sections.h b/include/asm-arm26/sections.h
new file mode 100644
index 00000000000..10b6370efad
--- /dev/null
+++ b/include/asm-arm26/sections.h
@@ -0,0 +1,2 @@
+//FIXME - nicked from arm32 - check its correct.
+#include <asm-generic/sections.h>
diff --git a/include/asm-arm26/segment.h b/include/asm-arm26/segment.h
new file mode 100644
index 00000000000..9e24c21f630
--- /dev/null
+++ b/include/asm-arm26/segment.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_ARM_SEGMENT_H
+#define __ASM_ARM_SEGMENT_H
+
+#define __KERNEL_CS 0x0
+#define __KERNEL_DS 0x0
+
+#define __USER_CS 0x1
+#define __USER_DS 0x1
+
+#endif /* __ASM_ARM_SEGMENT_H */
+
diff --git a/include/asm-arm26/semaphore-helper.h b/include/asm-arm26/semaphore-helper.h
new file mode 100644
index 00000000000..1d7f1987edb
--- /dev/null
+++ b/include/asm-arm26/semaphore-helper.h
@@ -0,0 +1,84 @@
+#ifndef ASMARM_SEMAPHORE_HELPER_H
+#define ASMARM_SEMAPHORE_HELPER_H
+
+/*
+ * These two _must_ execute atomically wrt each other.
+ */
+static inline void wake_one_more(struct semaphore * sem)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&semaphore_wake_lock, flags);
+ if (atomic_read(&sem->count) <= 0)
+ sem->waking++;
+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+}
+
+static inline int waking_non_zero(struct semaphore *sem)
+{
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&semaphore_wake_lock, flags);
+ if (sem->waking > 0) {
+ sem->waking--;
+ ret = 1;
+ }
+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+ return ret;
+}
+
+/*
+ * waking non zero interruptible
+ * 1 got the lock
+ * 0 go to sleep
+ * -EINTR interrupted
+ *
+ * We must undo the sem->count down_interruptible() increment while we are
+ * protected by the spinlock in order to make this atomic_inc() with the
+ * atomic_read() in wake_one_more(), otherwise we can race. -arca
+ */
+static inline int waking_non_zero_interruptible(struct semaphore *sem,
+ struct task_struct *tsk)
+{
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&semaphore_wake_lock, flags);
+ if (sem->waking > 0) {
+ sem->waking--;
+ ret = 1;
+ } else if (signal_pending(tsk)) {
+ atomic_inc(&sem->count);
+ ret = -EINTR;
+ }
+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+ return ret;
+}
+
+/*
+ * waking_non_zero_try_lock:
+ * 1 failed to lock
+ * 0 got the lock
+ *
+ * We must undo the sem->count down_interruptible() increment while we are
+ * protected by the spinlock in order to make this atomic_inc() with the
+ * atomic_read() in wake_one_more(), otherwise we can race. -arca
+ */
+static inline int waking_non_zero_trylock(struct semaphore *sem)
+{
+ unsigned long flags;
+ int ret = 1;
+
+ spin_lock_irqsave(&semaphore_wake_lock, flags);
+ if (sem->waking <= 0)
+ atomic_inc(&sem->count);
+ else {
+ sem->waking--;
+ ret = 0;
+ }
+ spin_unlock_irqrestore(&semaphore_wake_lock, flags);
+ return ret;
+}
+
+#endif
diff --git a/include/asm-arm26/semaphore.h b/include/asm-arm26/semaphore.h
new file mode 100644
index 00000000000..c1b6a1edad9
--- /dev/null
+++ b/include/asm-arm26/semaphore.h
@@ -0,0 +1,103 @@
+/*
+ * linux/include/asm-arm/semaphore.h
+ */
+#ifndef __ASM_ARM_SEMAPHORE_H
+#define __ASM_ARM_SEMAPHORE_H
+
+#include <linux/linkage.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+#include <asm/atomic.h>
+#include <asm/locks.h>
+
+struct semaphore {
+ atomic_t count;
+ int sleepers;
+ wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INIT(name, n) \
+{ \
+ .count = ATOMIC_INIT(n), \
+ .sleepers = 0, \
+ .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait), \
+}
+
+#define __MUTEX_INITIALIZER(name) \
+ __SEMAPHORE_INIT(name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+ struct semaphore name = __SEMAPHORE_INIT(name,count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0)
+
+static inline void sema_init(struct semaphore *sem, int val)
+{
+ atomic_set(&sem->count, val);
+ sem->sleepers = 0;
+ init_waitqueue_head(&sem->wait);
+}
+
+static inline void init_MUTEX(struct semaphore *sem)
+{
+ sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED(struct semaphore *sem)
+{
+ sema_init(sem, 0);
+}
+
+/*
+ * special register calling convention
+ */
+asmlinkage void __down_failed(void);
+asmlinkage int __down_interruptible_failed(void);
+asmlinkage int __down_trylock_failed(void);
+asmlinkage void __up_wakeup(void);
+
+extern void __down(struct semaphore * sem);
+extern int __down_interruptible(struct semaphore * sem);
+extern int __down_trylock(struct semaphore * sem);
+extern void __up(struct semaphore * sem);
+
+/*
+ * This is ugly, but we want the default case to fall through.
+ * "__down" is the actual routine that waits...
+ */
+static inline void down(struct semaphore * sem)
+{
+ might_sleep();
+ __down_op(sem, __down_failed);
+}
+
+/*
+ * This is ugly, but we want the default case to fall through.
+ * "__down_interruptible" is the actual routine that waits...
+ */
+static inline int down_interruptible (struct semaphore * sem)
+{
+ might_sleep();
+ return __down_op_ret(sem, __down_interruptible_failed);
+}
+
+static inline int down_trylock(struct semaphore *sem)
+{
+ return __down_op_ret(sem, __down_trylock_failed);
+}
+
+/*
+ * Note! This is subtle. We jump to wake people up only if
+ * the semaphore was negative (== somebody was waiting on it).
+ * The default case (no contention) will result in NO
+ * jumps for both down() and up().
+ */
+static inline void up(struct semaphore * sem)
+{
+ __up_op(sem, __up_wakeup);
+}
+
+#endif
diff --git a/include/asm-arm26/sembuf.h b/include/asm-arm26/sembuf.h
new file mode 100644
index 00000000000..1c028395428
--- /dev/null
+++ b/include/asm-arm26/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _ASMARM_SEMBUF_H
+#define _ASMARM_SEMBUF_H
+
+/*
+ * The semid64_ds structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+ __kernel_time_t sem_otime; /* last semop time */
+ unsigned long __unused1;
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long __unused2;
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASMARM_SEMBUF_H */
diff --git a/include/asm-arm26/serial.h b/include/asm-arm26/serial.h
new file mode 100644
index 00000000000..21e1df31f08
--- /dev/null
+++ b/include/asm-arm26/serial.h
@@ -0,0 +1,63 @@
+/*
+ * linux/include/asm-arm/serial.h
+ *
+ * Copyright (C) 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+ * 15-10-1996 RMK Created
+ */
+
+#ifndef __ASM_SERIAL_H
+#define __ASM_SERIAL_H
+
+#include <linux/config.h>
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD (1843200 / 16)
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#if defined(CONFIG_ARCH_A5K)
+ /* UART CLK PORT IRQ FLAGS */
+
+#define STD_SERIAL_PORT_DEFNS \
+ { 0, BASE_BAUD, 0x3F8, 10, STD_COM_FLAGS }, /* ttyS0 */ \
+ { 0, BASE_BAUD, 0x2F8, 10, STD_COM_FLAGS }, /* ttyS1 */
+
+#else
+
+#define STD_SERIAL_PORT_DEFNS \
+ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS0 */ \
+ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS1 */
+
+#endif
+
+#define EXTRA_SERIAL_PORT_DEFNS \
+ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS2 */ \
+ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS3 */ \
+ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS4 */ \
+ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS5 */ \
+ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS6 */ \
+ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS7 */ \
+ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS8 */ \
+ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS9 */ \
+ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS10 */ \
+ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS11 */ \
+ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS12 */ \
+ { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS13 */
+
+#define SERIAL_PORT_DFNS \
+ STD_SERIAL_PORT_DEFNS \
+ EXTRA_SERIAL_PORT_DEFNS
+
+#endif
diff --git a/include/asm-arm26/setup.h b/include/asm-arm26/setup.h
new file mode 100644
index 00000000000..6348931be65
--- /dev/null
+++ b/include/asm-arm26/setup.h
@@ -0,0 +1,205 @@
+/*
+ * linux/include/asm/setup.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Structure passed to kernel to tell it about the
+ * hardware it's running on. See Documentation/arm/Setup
+ * for more info.
+ */
+#ifndef __ASMARM_SETUP_H
+#define __ASMARM_SETUP_H
+
+#define COMMAND_LINE_SIZE 1024
+
+/* The list ends with an ATAG_NONE node. */
+#define ATAG_NONE 0x00000000
+
+struct tag_header {
+ u32 size;
+ u32 tag;
+};
+
+/* The list must start with an ATAG_CORE node */
+#define ATAG_CORE 0x54410001
+
+struct tag_core {
+ u32 flags; /* bit 0 = read-only */
+ u32 pagesize;
+ u32 rootdev;
+};
+
+/* it is allowed to have multiple ATAG_MEM nodes */
+#define ATAG_MEM 0x54410002
+
+struct tag_mem32 {
+ u32 size;
+ u32 start; /* physical start address */
+};
+
+/* VGA text type displays */
+#define ATAG_VIDEOTEXT 0x54410003
+
+struct tag_videotext {
+ u8 x;
+ u8 y;
+ u16 video_page;
+ u8 video_mode;
+ u8 video_cols;
+ u16 video_ega_bx;
+ u8 video_lines;
+ u8 video_isvga;
+ u16 video_points;
+};
+
+/* describes how the ramdisk will be used in kernel */
+#define ATAG_RAMDISK 0x54410004
+
+struct tag_ramdisk {
+ u32 flags; /* bit 0 = load, bit 1 = prompt */
+ u32 size; /* decompressed ramdisk size in _kilo_ bytes */
+ u32 start; /* starting block of floppy-based RAM disk image */
+};
+
+/* describes where the compressed ramdisk image lives */
+/*
+ * this one accidentally used virtual addresses - as such,
+ * its depreciated.
+ */
+#define ATAG_INITRD 0x54410005
+
+/* describes where the compressed ramdisk image lives */
+#define ATAG_INITRD2 0x54420005
+
+struct tag_initrd {
+ u32 start; /* physical start address */
+ u32 size; /* size of compressed ramdisk image in bytes */
+};
+
+/* board serial number. "64 bits should be enough for everybody" */
+#define ATAG_SERIAL 0x54410006
+
+struct tag_serialnr {
+ u32 low;
+ u32 high;
+};
+
+/* board revision */
+#define ATAG_REVISION 0x54410007
+
+struct tag_revision {
+ u32 rev;
+};
+
+/* initial values for vesafb-type framebuffers. see struct screen_info
+ * in include/linux/tty.h
+ */
+#define ATAG_VIDEOLFB 0x54410008
+
+struct tag_videolfb {
+ u16 lfb_width;
+ u16 lfb_height;
+ u16 lfb_depth;
+ u16 lfb_linelength;
+ u32 lfb_base;
+ u32 lfb_size;
+ u8 red_size;
+ u8 red_pos;
+ u8 green_size;
+ u8 green_pos;
+ u8 blue_size;
+ u8 blue_pos;
+ u8 rsvd_size;
+ u8 rsvd_pos;
+};
+
+/* command line: \0 terminated string */
+#define ATAG_CMDLINE 0x54410009
+
+struct tag_cmdline {
+ char cmdline[1]; /* this is the minimum size */
+};
+
+/* acorn RiscPC specific information */
+#define ATAG_ACORN 0x41000101
+
+struct tag_acorn {
+ u32 memc_control_reg;
+ u32 vram_pages;
+ u8 sounddefault;
+ u8 adfsdrives;
+};
+
+/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
+#define ATAG_MEMCLK 0x41000402
+
+struct tag_memclk {
+ u32 fmemclk;
+};
+
+struct tag {
+ struct tag_header hdr;
+ union {
+ struct tag_core core;
+ struct tag_mem32 mem;
+ struct tag_videotext videotext;
+ struct tag_ramdisk ramdisk;
+ struct tag_initrd initrd;
+ struct tag_serialnr serialnr;
+ struct tag_revision revision;
+ struct tag_videolfb videolfb;
+ struct tag_cmdline cmdline;
+
+ /*
+ * Acorn specific
+ */
+ struct tag_acorn acorn;
+
+ /*
+ * DC21285 specific
+ */
+ struct tag_memclk memclk;
+ } u;
+};
+
+struct tagtable {
+ u32 tag;
+ int (*parse)(const struct tag *);
+};
+
+#define __tag __attribute_used__ __attribute__((__section__(".taglist")))
+#define __tagtable(tag, fn) \
+static struct tagtable __tagtable_##fn __tag = { tag, fn }
+
+#define tag_member_present(tag,member) \
+ ((unsigned long)(&((struct tag *)0L)->member + 1) \
+ <= (tag)->hdr.size * 4)
+
+#define tag_next(t) ((struct tag *)((u32 *)(t) + (t)->hdr.size))
+#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
+
+#define for_each_tag(t,base) \
+ for (t = base; t->hdr.size; t = tag_next(t))
+
+/*
+ * Memory map description
+ */
+#define NR_BANKS 8
+
+struct meminfo {
+ int nr_banks;
+ unsigned long end;
+ struct {
+ unsigned long start;
+ unsigned long size;
+ int node;
+ } bank[NR_BANKS];
+};
+
+extern struct meminfo meminfo;
+
+#endif
diff --git a/include/asm-arm26/shmbuf.h b/include/asm-arm26/shmbuf.h
new file mode 100644
index 00000000000..2e5c67ba1c9
--- /dev/null
+++ b/include/asm-arm26/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _ASMARM_SHMBUF_H
+#define _ASMARM_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned long __unused1;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned long __unused2;
+ __kernel_time_t shm_ctime; /* last change time */
+ unsigned long __unused3;
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASMARM_SHMBUF_H */
diff --git a/include/asm-arm26/shmparam.h b/include/asm-arm26/shmparam.h
new file mode 100644
index 00000000000..d3748686631
--- /dev/null
+++ b/include/asm-arm26/shmparam.h
@@ -0,0 +1,15 @@
+#ifndef _ASMARM_SHMPARAM_H
+#define _ASMARM_SHMPARAM_H
+
+#ifndef SHMMAX
+#define SHMMAX 0x003fa000
+#endif
+
+/*
+ * This should be the size of the virtually indexed cache/ways,
+ * or page size, whichever is greater since the cache aliases
+ * every size/ways bytes.
+ */
+#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
+
+#endif /* _ASMARM_SHMPARAM_H */
diff --git a/include/asm-arm26/sigcontext.h b/include/asm-arm26/sigcontext.h
new file mode 100644
index 00000000000..013ad2074fc
--- /dev/null
+++ b/include/asm-arm26/sigcontext.h
@@ -0,0 +1,33 @@
+#ifndef _ASMARM_SIGCONTEXT_H
+#define _ASMARM_SIGCONTEXT_H
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked. Note: only add new entries
+ * to the end of the structure.
+ */
+struct sigcontext {
+ unsigned long trap_no;
+ unsigned long error_code;
+ unsigned long oldmask;
+ unsigned long arm_r0;
+ unsigned long arm_r1;
+ unsigned long arm_r2;
+ unsigned long arm_r3;
+ unsigned long arm_r4;
+ unsigned long arm_r5;
+ unsigned long arm_r6;
+ unsigned long arm_r7;
+ unsigned long arm_r8;
+ unsigned long arm_r9;
+ unsigned long arm_r10;
+ unsigned long arm_fp;
+ unsigned long arm_ip;
+ unsigned long arm_sp;
+ unsigned long arm_lr;
+ unsigned long arm_pc;
+ unsigned long fault_address;
+};
+
+
+#endif
diff --git a/include/asm-arm26/siginfo.h b/include/asm-arm26/siginfo.h
new file mode 100644
index 00000000000..5e21852e603
--- /dev/null
+++ b/include/asm-arm26/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _ASMARM_SIGINFO_H
+#define _ASMARM_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/include/asm-arm26/signal.h b/include/asm-arm26/signal.h
new file mode 100644
index 00000000000..6f62e51a2e5
--- /dev/null
+++ b/include/asm-arm26/signal.h
@@ -0,0 +1,201 @@
+#ifndef _ASMARM_SIGNAL_H
+#define _ASMARM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#define NSIG 32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+#define SIGSWI 32
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_SIGINFO deliver the signal with SIGINFO structs
+ * SA_THIRTYTWO delivers the signal in 32-bit mode, even if the task
+ * is running in 26-bit.
+ * SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)).
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
+#define SA_SIGINFO 0x00000004
+#define SA_THIRTYTWO 0x02000000
+#define SA_RESTORER 0x04000000
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
+
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#ifdef __KERNEL__
+
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE 0x80000000
+#define SA_SAMPLE_RANDOM 0x10000000
+#define SA_IRQNOMASK 0x08000000
+#define SA_SHIRQ 0x04000000
+#endif
+
+#define SIG_BLOCK 0 /* for blocking signals */
+#define SIG_UNBLOCK 1 /* for unblocking signals */
+#define SIG_SETMASK 2 /* for setting the signal mask */
+
+/* Type of a signal handler. */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
+#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
+#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
+
+#ifdef __KERNEL__
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#define sigmask(sig) (1UL << ((sig) - 1))
+//FIXME!!!
+//#define HAVE_ARCH_GET_SIGNAL_TO_DELIVER
+
+#endif
+
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+#endif
+
+
+#endif
diff --git a/include/asm-arm26/sizes.h b/include/asm-arm26/sizes.h
new file mode 100644
index 00000000000..f8d92ca1204
--- /dev/null
+++ b/include/asm-arm26/sizes.h
@@ -0,0 +1,52 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ * from .s file by awk -f s2h.awk
+ */
+/* Size defintions
+ * Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h 1
+
+/* handy sizes */
+#define SZ_1K 0x00000400
+#define SZ_4K 0x00001000
+#define SZ_8K 0x00002000
+#define SZ_16K 0x00004000
+#define SZ_64K 0x00010000
+#define SZ_128K 0x00020000
+#define SZ_256K 0x00040000
+#define SZ_512K 0x00080000
+
+#define SZ_1M 0x00100000
+#define SZ_2M 0x00200000
+#define SZ_4M 0x00400000
+#define SZ_8M 0x00800000
+#define SZ_16M 0x01000000
+#define SZ_32M 0x02000000
+#define SZ_64M 0x04000000
+#define SZ_128M 0x08000000
+#define SZ_256M 0x10000000
+#define SZ_512M 0x20000000
+
+#define SZ_1G 0x40000000
+#define SZ_2G 0x80000000
+
+#endif
+
+/* END */
diff --git a/include/asm-arm26/smp.h b/include/asm-arm26/smp.h
new file mode 100644
index 00000000000..5ca771631fd
--- /dev/null
+++ b/include/asm-arm26/smp.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_SMP
+#error SMP not supported
+#endif
+
+#endif
diff --git a/include/asm-arm26/socket.h b/include/asm-arm26/socket.h
new file mode 100644
index 00000000000..46d20585d95
--- /dev/null
+++ b/include/asm-arm26/socket.h
@@ -0,0 +1,50 @@
+#ifndef _ASMARM_SOCKET_H
+#define _ASMARM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET 1
+
+#define SO_DEBUG 1
+#define SO_REUSEADDR 2
+#define SO_TYPE 3
+#define SO_ERROR 4
+#define SO_DONTROUTE 5
+#define SO_BROADCAST 6
+#define SO_SNDBUF 7
+#define SO_RCVBUF 8
+#define SO_KEEPALIVE 9
+#define SO_OOBINLINE 10
+#define SO_NO_CHECK 11
+#define SO_PRIORITY 12
+#define SO_LINGER 13
+#define SO_BSDCOMPAT 14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED 16
+#define SO_PEERCRED 17
+#define SO_RCVLOWAT 18
+#define SO_SNDLOWAT 19
+#define SO_RCVTIMEO 20
+#define SO_SNDTIMEO 21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
+#define SO_SECURITY_ENCRYPTION_NETWORK 24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER 26
+#define SO_DETACH_FILTER 27
+
+#define SO_PEERNAME 28
+#define SO_TIMESTAMP 29
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_ACCEPTCONN 30
+
+#define SO_PEERSEC 31
+
+#endif /* _ASM_SOCKET_H */
diff --git a/include/asm-arm26/sockios.h b/include/asm-arm26/sockios.h
new file mode 100644
index 00000000000..77c34087d51
--- /dev/null
+++ b/include/asm-arm26/sockios.h
@@ -0,0 +1,12 @@
+#ifndef __ARCH_ARM_SOCKIOS_H
+#define __ARCH_ARM_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 0x8901
+#define SIOCSPGRP 0x8902
+#define FIOGETOWN 0x8903
+#define SIOCGPGRP 0x8904
+#define SIOCATMARK 0x8905
+#define SIOCGSTAMP 0x8906 /* Get stamp */
+
+#endif
diff --git a/include/asm-arm26/spinlock.h b/include/asm-arm26/spinlock.h
new file mode 100644
index 00000000000..e92e81deb4f
--- /dev/null
+++ b/include/asm-arm26/spinlock.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#error ARM architecture does not support SMP spin locks
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-arm26/stat.h b/include/asm-arm26/stat.h
new file mode 100644
index 00000000000..e4abc4fa085
--- /dev/null
+++ b/include/asm-arm26/stat.h
@@ -0,0 +1,77 @@
+#ifndef _ASMARM_STAT_H
+#define _ASMARM_STAT_H
+
+struct __old_kernel_stat {
+ unsigned short st_dev;
+ unsigned short st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned long st_size;
+ unsigned long st_atime;
+ unsigned long st_mtime;
+ unsigned long st_ctime;
+};
+
+struct stat {
+ unsigned short st_dev;
+ unsigned short __pad1;
+ unsigned long st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned short __pad2;
+ unsigned long st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+ unsigned long long st_dev;
+ unsigned char __pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO 1
+ unsigned long __st_ino;
+ unsigned int st_mode;
+ unsigned int st_nlink;
+
+ unsigned long st_uid;
+ unsigned long st_gid;
+
+ unsigned long long st_rdev;
+ unsigned char __pad3[4];
+
+ long long st_size;
+ unsigned long st_blksize;
+
+ unsigned long st_blocks; /* Number 512-byte blocks allocated. */
+ unsigned long __pad4; /* Future possible st_blocks hi bits */
+
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+
+ unsigned long long st_ino;
+};
+
+#endif
diff --git a/include/asm-arm26/statfs.h b/include/asm-arm26/statfs.h
new file mode 100644
index 00000000000..776dbc8f762
--- /dev/null
+++ b/include/asm-arm26/statfs.h
@@ -0,0 +1,8 @@
+#ifndef _ASMARM_STATFS_H
+#define _ASMARM_STATFS_H
+
+//FIXME - this may not be appropriate for arm26. check it out.
+
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/include/asm-arm26/string.h b/include/asm-arm26/string.h
new file mode 100644
index 00000000000..2a8ab162412
--- /dev/null
+++ b/include/asm-arm26/string.h
@@ -0,0 +1,43 @@
+#ifndef __ASM_ARM_STRING_H
+#define __ASM_ARM_STRING_H
+
+/*
+ * We don't do inline string functions, since the
+ * optimised inline asm versions are not small.
+ */
+
+#define __HAVE_ARCH_STRRCHR
+extern char * strrchr(const char * s, int c);
+
+#define __HAVE_ARCH_STRCHR
+extern char * strchr(const char * s, int c);
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void * memmove(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMCHR
+extern void * memchr(const void *, int, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMZERO
+#define __HAVE_ARCH_MEMSET
+extern void * memset(void *, int, __kernel_size_t);
+
+extern void __memzero(void *ptr, __kernel_size_t n);
+
+#define memset(p,v,n) \
+ ({ \
+ if ((n) != 0) { \
+ if (__builtin_constant_p((v)) && (v) == 0) \
+ __memzero((p),(n)); \
+ else \
+ memset((p),(v),(n)); \
+ } \
+ (p); \
+ })
+
+#define memzero(p,n) ({ if ((n) != 0) __memzero((p),(n)); (p); })
+
+#endif
diff --git a/include/asm-arm26/suspend.h b/include/asm-arm26/suspend.h
new file mode 100644
index 00000000000..5e4c1cc0c19
--- /dev/null
+++ b/include/asm-arm26/suspend.h
@@ -0,0 +1,4 @@
+#ifdef _ASMARM_SUSPEND_H
+#define _ASMARM_SUSPEND_H
+
+#endif
diff --git a/include/asm-arm26/sysirq.h b/include/asm-arm26/sysirq.h
new file mode 100644
index 00000000000..cad250c7b9e
--- /dev/null
+++ b/include/asm-arm26/sysirq.h
@@ -0,0 +1,61 @@
+/*
+ * linux/include/asm-arm/arch-arc/irqs.h
+ *
+ * Copyright (C) 1996 Russell King, Dave Gilbert
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 04-04-1998 PJB Merged arc and a5k versions
+ */
+
+#include <linux/config.h>
+
+#if defined(CONFIG_ARCH_A5K)
+#define IRQ_PRINTER 0
+#define IRQ_BATLOW 1
+#define IRQ_FLOPPYINDEX 2
+#define IRQ_FLOPPYDISK 12
+#elif defined(CONFIG_ARCH_ARC)
+#define IRQ_PRINTERBUSY 0
+#define IRQ_SERIALRING 1
+#define IRQ_PRINTERACK 2
+#define IRQ_FLOPPYCHANGED 12
+#endif
+
+#define IRQ_VSYNCPULSE 3
+#define IRQ_POWERON 4
+#define IRQ_TIMER0 5
+#define IRQ_TIMER1 6
+#define IRQ_IMMEDIATE 7
+#define IRQ_EXPCARDFIQ 8
+#define IRQ_SOUNDCHANGE 9
+#define IRQ_SERIALPORT 10
+#define IRQ_HARDDISK 11
+#define IRQ_EXPANSIONCARD 13
+#define IRQ_KEYBOARDTX 14
+#define IRQ_KEYBOARDRX 15
+
+#if defined(CONFIG_ARCH_A5K)
+#define FIQ_SERIALPORT 4
+#elif defined(CONFIG_ARCH_ARC)
+#define FIQ_FLOPPYIRQ 1
+#define FIQ_FD1772 FIQ_FLOPPYIRQ
+#endif
+
+#define FIQ_FLOPPYDATA 0
+#define FIQ_ECONET 2
+#define FIQ_EXPANSIONCARD 6
+#define FIQ_FORCE 7
+
+#define IRQ_TIMER IRQ_TIMER0
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START 64
+
+#define irq_cannonicalize(i) (i)
+
diff --git a/include/asm-arm26/system.h b/include/asm-arm26/system.h
new file mode 100644
index 00000000000..f23fac1938f
--- /dev/null
+++ b/include/asm-arm26/system.h
@@ -0,0 +1,252 @@
+#ifndef __ASM_ARM_SYSTEM_H
+#define __ASM_ARM_SYSTEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+
+/*
+ * This is used to ensure the compiler did actually allocate the register we
+ * asked it for some inline assembly sequences. Apparently we can't trust
+ * the compiler from one version to another so a bit of paranoia won't hurt.
+ * This string is meant to be concatenated with the inline asm string and
+ * will cause compilation to stop on mismatch. (From ARM32 - may come in handy)
+ */
+#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t"
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+
+struct thread_info;
+struct task_struct;
+
+#if 0
+/* information about the system we're running on */
+extern unsigned int system_rev;
+extern unsigned int system_serial_low;
+extern unsigned int system_serial_high;
+extern unsigned int mem_fclk_21285;
+
+FIXME - sort this
+/*
+ * We need to turn the caches off before calling the reset vector - RiscOS
+ * messes up if we don't
+ */
+#define proc_hard_reset() cpu_proc_fin()
+
+#endif
+
+struct pt_regs;
+
+void die(const char *msg, struct pt_regs *regs, int err)
+ __attribute__((noreturn));
+
+void die_if_kernel(const char *str, struct pt_regs *regs, int err);
+
+void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
+ struct pt_regs *),
+ int sig, const char *name);
+
+#include <asm/proc-fns.h>
+
+#define xchg(ptr,x) \
+ ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+#define tas(ptr) (xchg((ptr),1))
+
+extern asmlinkage void __backtrace(void);
+
+#define set_cr(x) \
+ __asm__ __volatile__( \
+ "mcr p15, 0, %0, c1, c0, 0 @ set CR" \
+ : : "r" (x) : "cc")
+
+#define get_cr() \
+ ({ \
+ unsigned int __val; \
+ __asm__ __volatile__( \
+ "mrc p15, 0, %0, c1, c0, 0 @ get CR" \
+ : "=r" (__val) : : "cc"); \
+ __val; \
+ })
+
+extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
+extern unsigned long cr_alignment; /* defined in entry-armv.S */
+
+#define UDBG_UNDEFINED (1 << 0)
+#define UDBG_SYSCALL (1 << 1)
+#define UDBG_BADABORT (1 << 2)
+#define UDBG_SEGV (1 << 3)
+#define UDBG_BUS (1 << 4)
+
+extern unsigned int user_debug;
+
+#define vectors_base() (0)
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+#define rmb() mb()
+#define wmb() mb()
+#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
+
+#define read_barrier_depends() do { } while(0)
+#define set_mb(var, value) do { var = value; mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+/*
+ * We assume knowledge of how
+ * spin_unlock_irq() and friends are implemented. This avoids
+ * us needlessly decrementing and incrementing the preempt count.
+ */
+#define prepare_arch_switch(rq,next) local_irq_enable()
+#define finish_arch_switch(rq,prev) spin_unlock(&(rq)->lock)
+#define task_running(rq,p) ((rq)->curr == (p))
+
+/*
+ * switch_to(prev, next) should switch from task `prev' to `next'
+ * `prev' will never be the same as `next'. schedule() itself
+ * contains the memory barrier to tell GCC not to cache `current'.
+ */
+extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *);
+
+#define switch_to(prev,next,last) \
+do { \
+ last = __switch_to(prev,prev->thread_info,next->thread_info); \
+} while (0)
+
+/*
+ * Save the current interrupt enable state & disable IRQs
+ */
+#define local_irq_save(x) \
+ do { \
+ unsigned long temp; \
+ __asm__ __volatile__( \
+" mov %0, pc @ save_flags_cli\n" \
+" orr %1, %0, #0x08000000\n" \
+" and %0, %0, #0x0c000000\n" \
+" teqp %1, #0\n" \
+ : "=r" (x), "=r" (temp) \
+ : \
+ : "memory"); \
+ } while (0)
+
+/*
+ * Enable IRQs (sti)
+ */
+#define local_irq_enable() \
+ do { \
+ unsigned long temp; \
+ __asm__ __volatile__( \
+" mov %0, pc @ sti\n" \
+" bic %0, %0, #0x08000000\n" \
+" teqp %0, #0\n" \
+ : "=r" (temp) \
+ : \
+ : "memory"); \
+ } while(0)
+
+/*
+ * Disable IRQs (cli)
+ */
+#define local_irq_disable() \
+ do { \
+ unsigned long temp; \
+ __asm__ __volatile__( \
+" mov %0, pc @ cli\n" \
+" orr %0, %0, #0x08000000\n" \
+" teqp %0, #0\n" \
+ : "=r" (temp) \
+ : \
+ : "memory"); \
+ } while(0)
+
+/* Enable FIQs (stf) */
+
+#define __stf() do { \
+ unsigned long temp; \
+ __asm__ __volatile__( \
+" mov %0, pc @ stf\n" \
+" bic %0, %0, #0x04000000\n" \
+" teqp %0, #0\n" \
+ : "=r" (temp)); \
+ } while(0)
+
+/* Disable FIQs (clf) */
+
+#define __clf() do { \
+ unsigned long temp; \
+ __asm__ __volatile__( \
+" mov %0, pc @ clf\n" \
+" orr %0, %0, #0x04000000\n" \
+" teqp %0, #0\n" \
+ : "=r" (temp)); \
+ } while(0)
+
+
+/*
+ * Save the current interrupt enable state.
+ */
+#define local_save_flags(x) \
+ do { \
+ __asm__ __volatile__( \
+" mov %0, pc @ save_flags\n" \
+" and %0, %0, #0x0c000000\n" \
+ : "=r" (x)); \
+ } while (0)
+
+
+/*
+ * restore saved IRQ & FIQ state
+ */
+#define local_irq_restore(x) \
+ do { \
+ unsigned long temp; \
+ __asm__ __volatile__( \
+" mov %0, pc @ restore_flags\n" \
+" bic %0, %0, #0x0c000000\n" \
+" orr %0, %0, %1\n" \
+" teqp %0, #0\n" \
+ : "=&r" (temp) \
+ : "r" (x) \
+ : "memory"); \
+ } while (0)
+
+
+#ifdef CONFIG_SMP
+#error SMP not supported
+#endif
+
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do { } while(0)
+
+#define clf() __clf()
+#define stf() __stf()
+
+#define irqs_disabled() \
+({ \
+ unsigned long flags; \
+ local_save_flags(flags); \
+ flags & PSR_I_BIT; \
+})
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+{
+ extern void __bad_xchg(volatile void *, int);
+
+ switch (size) {
+ case 1: return cpu_xchg_1(x, ptr);
+ case 4: return cpu_xchg_4(x, ptr);
+ default: __bad_xchg(ptr, size);
+ }
+ return 0;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-arm26/termbits.h b/include/asm-arm26/termbits.h
new file mode 100644
index 00000000000..bbc6e1d24d3
--- /dev/null
+++ b/include/asm-arm26/termbits.h
@@ -0,0 +1,171 @@
+#ifndef __ASM_ARM_TERMBITS_H
+#define __ASM_ARM_TERMBITS_H
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+#define NCCS 19
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK 0000020
+#define ISTRIP 0000040
+#define INLCR 0000100
+#define IGNCR 0000200
+#define ICRNL 0000400
+#define IUCLC 0001000
+#define IXON 0002000
+#define IXANY 0004000
+#define IXOFF 0010000
+#define IMAXBEL 0020000
+#define IUTF8 0040000
+
+/* c_oflag bits */
+#define OPOST 0000001
+#define OLCUC 0000002
+#define ONLCR 0000004
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+#define OFILL 0000100
+#define OFDEL 0000200
+#define NLDLY 0000400
+#define NL0 0000000
+#define NL1 0000400
+#define CRDLY 0003000
+#define CR0 0000000
+#define CR1 0001000
+#define CR2 0002000
+#define CR3 0003000
+#define TABDLY 0014000
+#define TAB0 0000000
+#define TAB1 0004000
+#define TAB2 0010000
+#define TAB3 0014000
+#define XTABS 0014000
+#define BSDLY 0020000
+#define BS0 0000000
+#define BS1 0020000
+#define VTDLY 0040000
+#define VT0 0000000
+#define VT1 0040000
+#define FFDLY 0100000
+#define FF0 0000000
+#define FF1 0100000
+
+/* c_cflag bit meaning */
+#define CBAUD 0010017
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0000060
+#define CS5 0000000
+#define CS6 0000020
+#define CS7 0000040
+#define CS8 0000060
+#define CSTOPB 0000100
+#define CREAD 0000200
+#define PARENB 0000400
+#define PARODD 0001000
+#define HUPCL 0002000
+#define CLOCAL 0004000
+#define CBAUDEX 0010000
+#define B57600 0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define B1000000 0010010
+#define B1152000 0010011
+#define B1500000 0010012
+#define B2000000 0010013
+#define B2500000 0010014
+#define B3000000 0010015
+#define B3500000 0010016
+#define B4000000 0010017
+#define CIBAUD 002003600000 /* input baud rate (not used) */
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
+#define CRTSCTS 020000000000 /* flow control */
+
+/* c_lflag bits */
+#define ISIG 0000001
+#define ICANON 0000002
+#define XCASE 0000004
+#define ECHO 0000010
+#define ECHOE 0000020
+#define ECHOK 0000040
+#define ECHONL 0000100
+#define NOFLSH 0000200
+#define TOSTOP 0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE 0004000
+#define FLUSHO 0010000
+#define PENDIN 0040000
+#define IEXTEN 0100000
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* tcsetattr uses these */
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif /* __ASM_ARM_TERMBITS_H */
diff --git a/include/asm-arm26/termios.h b/include/asm-arm26/termios.h
new file mode 100644
index 00000000000..7b8f5e8ae06
--- /dev/null
+++ b/include/asm-arm26/termios.h
@@ -0,0 +1,108 @@
+#ifndef __ASM_ARM_TERMIOS_H
+#define __ASM_ARM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+#ifdef __KERNEL__
+/* intr=^C quit=^| erase=del kill=^U
+ eof=^D vtime=\0 vmin=\1 sxtc=\0
+ start=^Q stop=^S susp=^Z eol=\0
+ reprint=^R discard=^U werase=^W lnext=^V
+ eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY 0
+#define N_SLIP 1
+#define N_MOUSE 2
+#define N_PPP 3
+#define N_STRIP 4
+#define N_AX25 5
+#define N_X25 6 /* X.25 async */
+#define N_6PACK 7
+#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964 9 /* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC 13 /* synchronous HDLC */
+#define N_SYNC_PPP 14
+#define N_HCI 15 /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+ unsigned short __tmp; \
+ get_user(__tmp,&(termio)->x); \
+ *(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+ copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+ put_user((termios)->c_iflag, &(termio)->c_iflag); \
+ put_user((termios)->c_oflag, &(termio)->c_oflag); \
+ put_user((termios)->c_cflag, &(termio)->c_cflag); \
+ put_user((termios)->c_lflag, &(termio)->c_lflag); \
+ put_user((termios)->c_line, &(termio)->c_line); \
+ copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_ARM_TERMIOS_H */
diff --git a/include/asm-arm26/thread_info.h b/include/asm-arm26/thread_info.h
new file mode 100644
index 00000000000..50f41b50268
--- /dev/null
+++ b/include/asm-arm26/thread_info.h
@@ -0,0 +1,144 @@
+/*
+ * linux/include/asm-arm26/thread_info.h
+ *
+ * Copyright (C) 2002 Russell King.
+ * Copyright (C) 2003 Ian Molton.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_THREAD_INFO_H
+#define __ASM_ARM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+struct exec_domain;
+
+#include <linux/compiler.h>
+#include <asm/fpstate.h>
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+typedef unsigned long mm_segment_t;
+
+struct cpu_context_save {
+ __u32 r4;
+ __u32 r5;
+ __u32 r6;
+ __u32 r7;
+ __u32 r8;
+ __u32 r9;
+ __u32 sl;
+ __u32 fp;
+ __u32 sp;
+ __u32 pc;
+};
+
+/*
+ * low level task data that entry.S needs immediate access to.
+ * We assume cpu_context follows immedately after cpu_domain.
+ */
+struct thread_info {
+ unsigned long flags; /* low level flags */
+ __s32 preempt_count; /* 0 => preemptable, <0 => bug */
+ mm_segment_t addr_limit; /* address limit */
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ __u32 cpu; /* cpu */
+ struct cpu_context_save cpu_context; /* cpu context */
+ struct restart_block restart_block;
+ union fp_state fpstate;
+};
+
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task &tsk, \
+ .exec_domain &default_exec_domain, \
+ .flags 0, \
+ .preempt_count 0, \
+ .addr_limit KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+/*
+ * how to get the thread information struct from C
+ */
+static inline struct thread_info *current_thread_info(void) __attribute_const__;
+
+static inline struct thread_info *current_thread_info(void)
+{
+ register unsigned long sp asm ("sp");
+ return (struct thread_info *)(sp & ~0x1fff);
+}
+
+/* FIXME - PAGE_SIZE < 32K */
+#define THREAD_SIZE (8*32768) // FIXME - this needs attention (see kernel/fork.c which gets a nice div by zero if this is lower than 8*32768
+#define __get_user_regs(x) (((struct pt_regs *)((unsigned long)(x) + THREAD_SIZE - 8)) - 1)
+
+extern struct thread_info *alloc_thread_info(struct task_struct *task);
+extern void free_thread_info(struct thread_info *);
+
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#define thread_saved_pc(tsk) \
+ ((unsigned long)(pc_pointer((tsk)->thread_info->cpu_context.pc)))
+#define thread_saved_fp(tsk) \
+ ((unsigned long)((tsk)->thread_info->cpu_context.fp))
+
+#else /* !__ASSEMBLY__ */
+
+#define TI_FLAGS 0
+#define TI_PREEMPT 4
+#define TI_ADDR_LIMIT 8
+#define TI_TASK 12
+#define TI_EXEC_DOMAIN 16
+#define TI_CPU 20
+#define TI_CPU_SAVE 24
+#define TI_RESTART_BLOCK 28
+#define TI_FPSTATE 68
+
+#endif
+
+#define PREEMPT_ACTIVE 0x04000000
+
+/*
+ * thread information flags:
+ * TIF_SYSCALL_TRACE - syscall trace active
+ * TIF_NOTIFY_RESUME - resumption notification requested
+ * TIF_SIGPENDING - signal pending
+ * TIF_NEED_RESCHED - rescheduling necessary
+ * TIF_USEDFPU - FPU was used by this task this quantum (SMP)
+ * TIF_POLLING_NRFLAG - true if poll_idle() is polling TIF_NEED_RESCHED
+ */
+#define TIF_NOTIFY_RESUME 0
+#define TIF_SIGPENDING 1
+#define TIF_NEED_RESCHED 2
+#define TIF_SYSCALL_TRACE 8
+#define TIF_USED_FPU 16
+#define TIF_POLLING_NRFLAG 17
+#define TIF_MEMDIE 18
+
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
+#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+#define _TIF_USED_FPU (1 << TIF_USED_FPU)
+#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
+
+/*
+ * Change these and you break ASM code in entry-common.S
+ */
+#define _TIF_WORK_MASK 0x000000ff
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ARM_THREAD_INFO_H */
diff --git a/include/asm-arm26/timex.h b/include/asm-arm26/timex.h
new file mode 100644
index 00000000000..68322fbc1ae
--- /dev/null
+++ b/include/asm-arm26/timex.h
@@ -0,0 +1,29 @@
+/*
+ * linux/include/asm-arm/timex.h
+ *
+ * Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Architecture Specific TIME specifications
+ */
+#ifndef _ASMARM_TIMEX_H
+#define _ASMARM_TIMEX_H
+
+/*
+ * On the RiscPC, the clock ticks at 2MHz.
+ */
+#define CLOCK_TICK_RATE 2000000
+
+/* IS THAT RIGHT ON A5000? FIXME */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+ return 0;
+}
+
+#endif
diff --git a/include/asm-arm26/tlb.h b/include/asm-arm26/tlb.h
new file mode 100644
index 00000000000..1316352a58f
--- /dev/null
+++ b/include/asm-arm26/tlb.h
@@ -0,0 +1,78 @@
+#ifndef __ASMARM_TLB_H
+#define __ASMARM_TLB_H
+
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+/*
+ * TLB handling. This allows us to remove pages from the page
+ * tables, and efficiently handle the TLB issues.
+ */
+struct mmu_gather {
+ struct mm_struct *mm;
+ unsigned int freed;
+ unsigned int fullmm;
+
+ unsigned int flushes;
+ unsigned int avoided_flushes;
+};
+
+extern struct mmu_gather mmu_gathers[NR_CPUS];
+
+static inline struct mmu_gather *
+tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
+{
+ int cpu = smp_processor_id();
+ struct mmu_gather *tlb = &mmu_gathers[cpu];
+
+ tlb->mm = mm;
+ tlb->freed = 0;
+ tlb->fullmm = full_mm_flush;
+
+ return tlb;
+}
+
+static inline void
+tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+ struct mm_struct *mm = tlb->mm;
+ unsigned long freed = tlb->freed;
+ int rss = get_mm_counter(mm, rss);
+
+ if (rss < freed)
+ freed = rss;
+ add_mm_counter(mm, rss, -freed);
+
+ if (freed) {
+ flush_tlb_mm(mm);
+ tlb->flushes++;
+ } else {
+ tlb->avoided_flushes++;
+ }
+
+ /* keep the page table cache within bounds */
+ check_pgt_cache();
+}
+
+
+static inline unsigned int
+tlb_is_full_mm(struct mmu_gather *tlb)
+{
+ return tlb->fullmm;
+}
+
+#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0)
+//#define tlb_start_vma(tlb,vma) do { } while (0)
+//FIXME - ARM32 uses this now that things changed in the kernel. seems like it may be pointless on arm26, however to get things compiling...
+#define tlb_start_vma(tlb,vma) \
+ do { \
+ if (!tlb->fullmm) \
+ flush_cache_range(vma, vma->vm_start, vma->vm_end); \
+ } while (0)
+#define tlb_end_vma(tlb,vma) do { } while (0)
+
+#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page)
+#define pte_free_tlb(tlb,ptep) pte_free(ptep)
+#define pmd_free_tlb(tlb,pmdp) pmd_free(pmdp)
+
+#endif
diff --git a/include/asm-arm26/tlbflush.h b/include/asm-arm26/tlbflush.h
new file mode 100644
index 00000000000..f79c1cbf4f6
--- /dev/null
+++ b/include/asm-arm26/tlbflush.h
@@ -0,0 +1,70 @@
+#ifndef __ASMARM_TLBFLUSH_H
+#define __ASMARM_TLBFLUSH_H
+
+/*
+ * TLB flushing:
+ *
+ * - flush_tlb_all() flushes all processes TLBs
+ * - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ * - flush_tlb_page(vma, vmaddr) flushes one page
+ * - flush_tlb_range(vma, start, end) flushes a range of pages
+ */
+
+#define flush_tlb_all() memc_update_all()
+#define flush_tlb_mm(mm) memc_update_mm(mm)
+#define flush_tlb_page(vma, vmaddr) do { printk("flush_tlb_page\n");} while (0) // IS THIS RIGHT?
+#define flush_tlb_range(vma,start,end) \
+ do { memc_update_mm(vma->vm_mm); (void)(start); (void)(end); } while (0)
+#define flush_tlb_pgtables(mm,start,end) do { printk("flush_tlb_pgtables\n");} while (0)
+#define flush_tlb_kernel_range(s,e) do { printk("flush_tlb_range\n");} while (0)
+
+/*
+ * The following handle the weird MEMC chip
+ */
+static inline void memc_update_all(void)
+{
+ struct task_struct *p;
+ cpu_memc_update_all(init_mm.pgd);
+ for_each_process(p) {
+ if (!p->mm)
+ continue;
+ cpu_memc_update_all(p->mm->pgd);
+ }
+ processor._set_pgd(current->active_mm->pgd);
+}
+
+static inline void memc_update_mm(struct mm_struct *mm)
+{
+ cpu_memc_update_all(mm->pgd);
+
+ if (mm == current->active_mm)
+ processor._set_pgd(mm->pgd);
+}
+
+static inline void
+memc_clear(struct mm_struct *mm, struct page *page)
+{
+ cpu_memc_update_entry(mm->pgd, (unsigned long) page_address(page), 0);
+
+ if (mm == current->active_mm)
+ processor._set_pgd(mm->pgd);
+}
+
+static inline void
+memc_update_addr(struct mm_struct *mm, pte_t pte, unsigned long vaddr)
+{
+ cpu_memc_update_entry(mm->pgd, pte_val(pte), vaddr);
+
+ if (mm == current->active_mm)
+ processor._set_pgd(mm->pgd);
+}
+
+static inline void
+update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+ struct mm_struct *mm = vma->vm_mm;
+printk("update_mmu_cache\n");
+ memc_update_addr(mm, pte, addr);
+}
+
+#endif
diff --git a/include/asm-arm26/topology.h b/include/asm-arm26/topology.h
new file mode 100644
index 00000000000..accbd7cad9b
--- /dev/null
+++ b/include/asm-arm26/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_ARM_TOPOLOGY_H
+#define _ASM_ARM_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_ARM_TOPOLOGY_H */
diff --git a/include/asm-arm26/types.h b/include/asm-arm26/types.h
new file mode 100644
index 00000000000..56cbe573a23
--- /dev/null
+++ b/include/asm-arm26/types.h
@@ -0,0 +1,61 @@
+#ifndef __ASM_ARM_TYPES_H
+#define __ASM_ARM_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+/* Dma addresses are 32-bits wide. */
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+typedef unsigned int kmem_bufctl_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/asm-arm26/uaccess-asm.h b/include/asm-arm26/uaccess-asm.h
new file mode 100644
index 00000000000..19f798e338c
--- /dev/null
+++ b/include/asm-arm26/uaccess-asm.h
@@ -0,0 +1,153 @@
+/*
+ * linux/include/asm-arm/proc-armo/uaccess.h
+ *
+ * Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The fs functions are implemented on the ARM2 and ARM3 architectures
+ * manually.
+ * Use *_user functions to access user memory with faulting behaving
+ * as though the user is accessing the memory.
+ * Use set_fs(get_ds()) and then the *_user functions to allow them to
+ * access kernel memory.
+ */
+
+/*
+ * These are the values used to represent the user `fs' and the kernel `ds'
+ * FIXME - the KERNEL_DS should end at 0x03000000 but we want to access ROM at
+ * 0x03400000. ideally we want to forbid access to the IO space inbetween.
+ */
+#define KERNEL_DS 0x03FFFFFF
+#define USER_DS 0x02000000
+
+extern uaccess_t uaccess_user, uaccess_kernel;
+
+static inline void set_fs (mm_segment_t fs)
+{
+ current_thread_info()->addr_limit = fs;
+ current->thread.uaccess = (fs == USER_DS ? &uaccess_user : &uaccess_kernel);
+}
+
+#define __range_ok(addr,size) ({ \
+ unsigned long flag, sum; \
+ __asm__ __volatile__("subs %1, %0, %3; cmpcs %1, %2; movcs %0, #0" \
+ : "=&r" (flag), "=&r" (sum) \
+ : "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \
+ : "cc"); \
+ flag; })
+
+#define __addr_ok(addr) ({ \
+ unsigned long flag; \
+ __asm__ __volatile__("cmp %2, %0; movlo %0, #0" \
+ : "=&r" (flag) \
+ : "0" (current_thread_info()->addr_limit), "r" (addr) \
+ : "cc"); \
+ (flag == 0); })
+
+#define __put_user_asm_byte(x,addr,err) \
+ __asm__ __volatile__( \
+ " mov r0, %1\n" \
+ " mov r1, %2\n" \
+ " mov r2, %0\n" \
+ " mov lr, pc\n" \
+ " mov pc, %3\n" \
+ " mov %0, r2\n" \
+ : "=r" (err) \
+ : "r" (x), "r" (addr), "r" (current->thread.uaccess->put_byte), \
+ "0" (err) \
+ : "r0", "r1", "r2", "lr")
+
+#define __put_user_asm_half(x,addr,err) \
+ __asm__ __volatile__( \
+ " mov r0, %1\n" \
+ " mov r1, %2\n" \
+ " mov r2, %0\n" \
+ " mov lr, pc\n" \
+ " mov pc, %3\n" \
+ " mov %0, r2\n" \
+ : "=r" (err) \
+ : "r" (x), "r" (addr), "r" (current->thread.uaccess->put_half), \
+ "0" (err) \
+ : "r0", "r1", "r2", "lr")
+
+#define __put_user_asm_word(x,addr,err) \
+ __asm__ __volatile__( \
+ " mov r0, %1\n" \
+ " mov r1, %2\n" \
+ " mov r2, %0\n" \
+ " mov lr, pc\n" \
+ " mov pc, %3\n" \
+ " mov %0, r2\n" \
+ : "=r" (err) \
+ : "r" (x), "r" (addr), "r" (current->thread.uaccess->put_word), \
+ "0" (err) \
+ : "r0", "r1", "r2", "lr")
+
+#define __put_user_asm_dword(x,addr,err) \
+ __asm__ __volatile__( \
+ " mov r0, %1\n" \
+ " mov r1, %2\n" \
+ " mov r2, %0\n" \
+ " mov lr, pc\n" \
+ " mov pc, %3\n" \
+ " mov %0, r2\n" \
+ : "=r" (err) \
+ : "r" (x), "r" (addr), "r" (current->thread.uaccess->put_dword), \
+ "0" (err) \
+ : "r0", "r1", "r2", "lr")
+
+#define __get_user_asm_byte(x,addr,err) \
+ __asm__ __volatile__( \
+ " mov r0, %2\n" \
+ " mov r1, %0\n" \
+ " mov lr, pc\n" \
+ " mov pc, %3\n" \
+ " mov %0, r1\n" \
+ " mov %1, r0\n" \
+ : "=r" (err), "=r" (x) \
+ : "r" (addr), "r" (current->thread.uaccess->get_byte), "0" (err) \
+ : "r0", "r1", "r2", "lr")
+
+#define __get_user_asm_half(x,addr,err) \
+ __asm__ __volatile__( \
+ " mov r0, %2\n" \
+ " mov r1, %0\n" \
+ " mov lr, pc\n" \
+ " mov pc, %3\n" \
+ " mov %0, r1\n" \
+ " mov %1, r0\n" \
+ : "=r" (err), "=r" (x) \
+ : "r" (addr), "r" (current->thread.uaccess->get_half), "0" (err) \
+ : "r0", "r1", "r2", "lr")
+
+#define __get_user_asm_word(x,addr,err) \
+ __asm__ __volatile__( \
+ " mov r0, %2\n" \
+ " mov r1, %0\n" \
+ " mov lr, pc\n" \
+ " mov pc, %3\n" \
+ " mov %0, r1\n" \
+ " mov %1, r0\n" \
+ : "=r" (err), "=r" (x) \
+ : "r" (addr), "r" (current->thread.uaccess->get_word), "0" (err) \
+ : "r0", "r1", "r2", "lr")
+
+#define __do_copy_from_user(to,from,n) \
+ (n) = current->thread.uaccess->copy_from_user((to),(from),(n))
+
+#define __do_copy_to_user(to,from,n) \
+ (n) = current->thread.uaccess->copy_to_user((to),(from),(n))
+
+#define __do_clear_user(addr,sz) \
+ (sz) = current->thread.uaccess->clear_user((addr),(sz))
+
+#define __do_strncpy_from_user(dst,src,count,res) \
+ (res) = current->thread.uaccess->strncpy_from_user(dst,src,count)
+
+#define __do_strnlen_user(s,n,res) \
+ (res) = current->thread.uaccess->strnlen_user(s,n)
diff --git a/include/asm-arm26/uaccess.h b/include/asm-arm26/uaccess.h
new file mode 100644
index 00000000000..ab9ce38c6ae
--- /dev/null
+++ b/include/asm-arm26/uaccess.h
@@ -0,0 +1,299 @@
+#ifndef _ASMARM_UACCESS_H
+#define _ASMARM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <asm/errno.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+extern int fixup_exception(struct pt_regs *regs);
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current_thread_info()->addr_limit)
+#define segment_eq(a,b) ((a) == (b))
+
+#include <asm/uaccess-asm.h>
+
+#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
+
+/* this function will go away soon - use access_ok() instead */
+static inline int __deprecated verify_area(int type, const void * addr, unsigned long size)
+{
+ return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+/*
+ * Single-value transfer routines. They automatically use the right
+ * size if we just have the right pointer type. Note that the functions
+ * which read from user space (*get_*) need to take care not to leak
+ * kernel data even if the calling code is buggy and fails to check
+ * the return value. This means zeroing out the destination variable
+ * or buffer on error. Normally this is done out of line by the
+ * fixup code, but there are a few places where it intrudes on the
+ * main code path. When we only write to user space, there is no
+ * problem.
+ *
+ * The "__xxx" versions of the user access functions do not verify the
+ * address space - it must have been done previously with a separate
+ * "access_ok()" call.
+ *
+ * The "xxx_error" versions set the third argument to EFAULT if an
+ * error occurs, and leave it unchanged on success. Note that these
+ * versions are void (ie, don't return a value as such).
+ */
+
+extern int __get_user_1(void *);
+extern int __get_user_2(void *);
+extern int __get_user_4(void *);
+extern int __get_user_8(void *);
+extern int __get_user_bad(void);
+
+#define __get_user_x(__r1,__p,__e,__s,__i...) \
+ __asm__ __volatile__ ("bl __get_user_" #__s \
+ : "=&r" (__e), "=r" (__r1) \
+ : "0" (__p) \
+ : __i)
+
+#define get_user(x,p) \
+ ({ \
+ const register typeof(*(p)) *__p asm("r0") = (p); \
+ register typeof(*(p)) __r1 asm("r1"); \
+ register int __e asm("r0"); \
+ switch (sizeof(*(p))) { \
+ case 1: \
+ __get_user_x(__r1, __p, __e, 1, "lr"); \
+ break; \
+ case 2: \
+ __get_user_x(__r1, __p, __e, 2, "r2", "lr"); \
+ break; \
+ case 4: \
+ __get_user_x(__r1, __p, __e, 4, "lr"); \
+ break; \
+ case 8: \
+ __get_user_x(__r1, __p, __e, 8, "lr"); \
+ break; \
+ default: __e = __get_user_bad(); break; \
+ } \
+ x = __r1; \
+ __e; \
+ })
+
+
+#define __get_user(x,ptr) \
+({ \
+ long __gu_err = 0; \
+ __get_user_err((x),(ptr),__gu_err); \
+ __gu_err; \
+})
+
+#define __get_user_error(x,ptr,err) \
+({ \
+ __get_user_err((x),(ptr),err); \
+ (void) 0; \
+})
+
+#define __get_user_err(x,ptr,err) \
+do { \
+ unsigned long __gu_addr = (unsigned long)(ptr); \
+ unsigned long __gu_val; \
+ switch (sizeof(*(ptr))) { \
+ case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \
+ case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \
+ case 4: __get_user_asm_word(__gu_val,__gu_addr,err); break; \
+ default: (__gu_val) = __get_user_bad(); \
+ } \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+} while (0)
+
+extern int __put_user_1(void *, unsigned int);
+extern int __put_user_2(void *, unsigned int);
+extern int __put_user_4(void *, unsigned int);
+extern int __put_user_8(void *, unsigned long long);
+extern int __put_user_bad(void);
+
+#define __put_user_x(__r1,__p,__e,__s) \
+ __asm__ __volatile__ ( \
+ __asmeq("%0", "r0") __asmeq("%2", "r1") \
+ "bl __put_user_" #__s \
+ : "=&r" (__e) \
+ : "0" (__p), "r" (__r1) \
+ : "ip", "lr", "cc")
+
+#define put_user(x,p) \
+ ({ \
+ const register typeof(*(p)) __r1 asm("r1") = (x); \
+ const register typeof(*(p)) *__p asm("r0") = (p); \
+ register int __e asm("r0"); \
+ switch (sizeof(*(__p))) { \
+ case 1: \
+ __put_user_x(__r1, __p, __e, 1); \
+ break; \
+ case 2: \
+ __put_user_x(__r1, __p, __e, 2); \
+ break; \
+ case 4: \
+ __put_user_x(__r1, __p, __e, 4); \
+ break; \
+ case 8: \
+ __put_user_x(__r1, __p, __e, 8); \
+ break; \
+ default: __e = __put_user_bad(); break; \
+ } \
+ __e; \
+ })
+
+#if 0
+/********************* OLD METHOD *******************/
+#define __put_user_x(__r1,__p,__e,__s,__i...) \
+ __asm__ __volatile__ ("bl __put_user_" #__s \
+ : "=&r" (__e) \
+ : "0" (__p), "r" (__r1) \
+ : __i)
+
+#define put_user(x,p) \
+ ({ \
+ const register typeof(*(p)) __r1 asm("r1") = (x); \
+ const register typeof(*(p)) *__p asm("r0") = (p); \
+ register int __e asm("r0"); \
+ switch (sizeof(*(p))) { \
+ case 1: \
+ __put_user_x(__r1, __p, __e, 1, "r2", "lr"); \
+ break; \
+ case 2: \
+ __put_user_x(__r1, __p, __e, 2, "r2", "lr"); \
+ break; \
+ case 4: \
+ __put_user_x(__r1, __p, __e, 4, "r2", "lr"); \
+ break; \
+ case 8: \
+ __put_user_x(__r1, __p, __e, 8, "r2", "ip", "lr"); \
+ break; \
+ default: __e = __put_user_bad(); break; \
+ } \
+ __e; \
+ })
+/*************************************************/
+#endif
+
+#define __put_user(x,ptr) \
+({ \
+ long __pu_err = 0; \
+ __put_user_err((x),(ptr),__pu_err); \
+ __pu_err; \
+})
+
+#define __put_user_error(x,ptr,err) \
+({ \
+ __put_user_err((x),(ptr),err); \
+ (void) 0; \
+})
+
+#define __put_user_err(x,ptr,err) \
+do { \
+ unsigned long __pu_addr = (unsigned long)(ptr); \
+ __typeof__(*(ptr)) __pu_val = (x); \
+ switch (sizeof(*(ptr))) { \
+ case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \
+ case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \
+ case 4: __put_user_asm_word(__pu_val,__pu_addr,err); break; \
+ case 8: __put_user_asm_dword(__pu_val,__pu_addr,err); break; \
+ default: __put_user_bad(); \
+ } \
+} while (0)
+
+static __inline__ unsigned long copy_from_user(void *to, const void *from, unsigned long n)
+{
+ if (access_ok(VERIFY_READ, from, n))
+ __do_copy_from_user(to, from, n);
+ else /* security hole - plug it */
+ memzero(to, n);
+ return n;
+}
+
+static __inline__ unsigned long __copy_from_user(void *to, const void *from, unsigned long n)
+{
+ __do_copy_from_user(to, from, n);
+ return n;
+}
+
+static __inline__ unsigned long copy_to_user(void *to, const void *from, unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ __do_copy_to_user(to, from, n);
+ return n;
+}
+
+static __inline__ unsigned long __copy_to_user(void *to, const void *from, unsigned long n)
+{
+ __do_copy_to_user(to, from, n);
+ return n;
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+static __inline__ unsigned long clear_user (void *to, unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ __do_clear_user(to, n);
+ return n;
+}
+
+static __inline__ unsigned long __clear_user (void *to, unsigned long n)
+{
+ __do_clear_user(to, n);
+ return n;
+}
+
+static __inline__ long strncpy_from_user (char *dst, const char *src, long count)
+{
+ long res = -EFAULT;
+ if (access_ok(VERIFY_READ, src, 1))
+ __do_strncpy_from_user(dst, src, count, res);
+ return res;
+}
+
+static __inline__ long __strncpy_from_user (char *dst, const char *src, long count)
+{
+ long res;
+ __do_strncpy_from_user(dst, src, count, res);
+ return res;
+}
+
+#define strlen_user(s) strnlen_user(s, ~0UL >> 1)
+
+static inline long strnlen_user(const char *s, long n)
+{
+ unsigned long res = 0;
+
+ if (__addr_ok(s))
+ __do_strnlen_user(s, n, res);
+
+ return res;
+}
+
+#endif /* _ASMARM_UACCESS_H */
diff --git a/include/asm-arm26/ucontext.h b/include/asm-arm26/ucontext.h
new file mode 100644
index 00000000000..f853130137c
--- /dev/null
+++ b/include/asm-arm26/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASMARM_UCONTEXT_H
+#define _ASMARM_UCONTEXT_H
+
+struct ucontext {
+ unsigned long uc_flags;
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ struct sigcontext uc_mcontext;
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+#endif /* !_ASMARM_UCONTEXT_H */
diff --git a/include/asm-arm26/unaligned.h b/include/asm-arm26/unaligned.h
new file mode 100644
index 00000000000..d992782089f
--- /dev/null
+++ b/include/asm-arm26/unaligned.h
@@ -0,0 +1,118 @@
+#ifndef __ASM_ARM_UNALIGNED_H
+#define __ASM_ARM_UNALIGNED_H
+
+#include <asm/types.h>
+
+extern int __bug_unaligned_x(void *ptr);
+
+/*
+ * What is the most efficient way of loading/storing an unaligned value?
+ *
+ * That is the subject of this file. Efficiency here is defined as
+ * minimum code size with minimum register usage for the common cases.
+ * It is currently not believed that long longs are common, so we
+ * trade efficiency for the chars, shorts and longs against the long
+ * longs.
+ *
+ * Current stats with gcc 2.7.2.2 for these functions:
+ *
+ * ptrsize get: code regs put: code regs
+ * 1 1 1 1 2
+ * 2 3 2 3 2
+ * 4 7 3 7 3
+ * 8 20 6 16 6
+ *
+ * gcc 2.95.1 seems to code differently:
+ *
+ * ptrsize get: code regs put: code regs
+ * 1 1 1 1 2
+ * 2 3 2 3 2
+ * 4 7 4 7 4
+ * 8 19 8 15 6
+ *
+ * which may or may not be more efficient (depending upon whether
+ * you can afford the extra registers). Hopefully the gcc 2.95
+ * is inteligent enough to decide if it is better to use the
+ * extra register, but evidence so far seems to suggest otherwise.
+ *
+ * Unfortunately, gcc is not able to optimise the high word
+ * out of long long >> 32, or the low word from long long << 32
+ */
+
+#define __get_unaligned_2_le(__p) \
+ (__p[0] | __p[1] << 8)
+
+#define __get_unaligned_4_le(__p) \
+ (__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24)
+
+#define __get_unaligned_le(ptr) \
+ ({ \
+ __typeof__(*(ptr)) __v; \
+ __u8 *__p = (__u8 *)(ptr); \
+ switch (sizeof(*(ptr))) { \
+ case 1: __v = *(ptr); break; \
+ case 2: __v = __get_unaligned_2_le(__p); break; \
+ case 4: __v = __get_unaligned_4_le(__p); break; \
+ case 8: { \
+ unsigned int __v1, __v2; \
+ __v2 = __get_unaligned_4_le((__p+4)); \
+ __v1 = __get_unaligned_4_le(__p); \
+ __v = ((unsigned long long)__v2 << 32 | __v1); \
+ } \
+ break; \
+ default: __v = __bug_unaligned_x(__p); break; \
+ } \
+ __v; \
+ })
+
+static inline void __put_unaligned_2_le(__u32 __v, register __u8 *__p)
+{
+ *__p++ = __v;
+ *__p++ = __v >> 8;
+}
+
+static inline void __put_unaligned_4_le(__u32 __v, register __u8 *__p)
+{
+ __put_unaligned_2_le(__v >> 16, __p + 2);
+ __put_unaligned_2_le(__v, __p);
+}
+
+static inline void __put_unaligned_8_le(const unsigned long long __v, register __u8 *__p)
+{
+ /*
+ * tradeoff: 8 bytes of stack for all unaligned puts (2
+ * instructions), or an extra register in the long long
+ * case - go for the extra register.
+ */
+ __put_unaligned_4_le(__v >> 32, __p+4);
+ __put_unaligned_4_le(__v, __p);
+}
+
+/*
+ * Try to store an unaligned value as efficiently as possible.
+ */
+#define __put_unaligned_le(val,ptr) \
+ ({ \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ *(ptr) = (val); \
+ break; \
+ case 2: __put_unaligned_2_le((val),(__u8 *)(ptr)); \
+ break; \
+ case 4: __put_unaligned_4_le((val),(__u8 *)(ptr)); \
+ break; \
+ case 8: __put_unaligned_8_le((val),(__u8 *)(ptr)); \
+ break; \
+ default: __bug_unaligned_x(ptr); \
+ break; \
+ } \
+ (void) 0; \
+ })
+
+/*
+ * Select endianness
+ */
+#define get_unaligned __get_unaligned_le
+#define put_unaligned __put_unaligned_le
+
+#endif
diff --git a/include/asm-arm26/uncompress.h b/include/asm-arm26/uncompress.h
new file mode 100644
index 00000000000..df2cba816a4
--- /dev/null
+++ b/include/asm-arm26/uncompress.h
@@ -0,0 +1,111 @@
+/*
+ * linux/include/asm-arm/arch-arc/uncompress.h
+ *
+ * Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VIDMEM ((char *)0x02000000)
+
+int video_num_columns, video_num_lines, video_size_row;
+int white, bytes_per_char_h;
+extern unsigned long con_charconvtable[256];
+
+struct param_struct {
+ unsigned long page_size;
+ unsigned long nr_pages;
+ unsigned long ramdisk_size;
+ unsigned long mountrootrdonly;
+ unsigned long rootdev;
+ unsigned long video_num_cols;
+ unsigned long video_num_rows;
+ unsigned long video_x;
+ unsigned long video_y;
+ unsigned long memc_control_reg;
+ unsigned char sounddefault;
+ unsigned char adfsdrives;
+ unsigned char bytes_per_char_h;
+ unsigned char bytes_per_char_v;
+ unsigned long unused[256/4-11];
+};
+
+static struct param_struct *params = (struct param_struct *)0x0207c000;
+
+/*
+ * This does not append a newline
+ */
+static void puts(const char *s)
+{
+ extern void ll_write_char(char *, unsigned long);
+ int x,y;
+ unsigned char c;
+ char *ptr;
+
+ x = params->video_x;
+ y = params->video_y;
+
+ while ( ( c = *(unsigned char *)s++ ) != '\0' ) {
+ if ( c == '\n' ) {
+ x = 0;
+ if ( ++y >= video_num_lines ) {
+ y--;
+ }
+ } else {
+ ptr = VIDMEM + ((y*video_num_columns*params->bytes_per_char_v+x)*bytes_per_char_h);
+ ll_write_char(ptr, c|(white<<16));
+ if ( ++x >= video_num_columns ) {
+ x = 0;
+ if ( ++y >= video_num_lines ) {
+ y--;
+ }
+ }
+ }
+ }
+
+ params->video_x = x;
+ params->video_y = y;
+}
+
+static void error(char *x);
+
+/*
+ * Setup for decompression
+ */
+static void arch_decomp_setup(void)
+{
+ int i;
+
+ video_num_lines = params->video_num_rows;
+ video_num_columns = params->video_num_cols;
+ bytes_per_char_h = params->bytes_per_char_h;
+ video_size_row = video_num_columns * bytes_per_char_h;
+ if (bytes_per_char_h == 4)
+ for (i = 0; i < 256; i++)
+ con_charconvtable[i] =
+ (i & 128 ? 1 << 0 : 0) |
+ (i & 64 ? 1 << 4 : 0) |
+ (i & 32 ? 1 << 8 : 0) |
+ (i & 16 ? 1 << 12 : 0) |
+ (i & 8 ? 1 << 16 : 0) |
+ (i & 4 ? 1 << 20 : 0) |
+ (i & 2 ? 1 << 24 : 0) |
+ (i & 1 ? 1 << 28 : 0);
+ else
+ for (i = 0; i < 16; i++)
+ con_charconvtable[i] =
+ (i & 8 ? 1 << 0 : 0) |
+ (i & 4 ? 1 << 8 : 0) |
+ (i & 2 ? 1 << 16 : 0) |
+ (i & 1 ? 1 << 24 : 0);
+
+ white = bytes_per_char_h == 8 ? 0xfc : 7;
+
+ if (params->nr_pages * params->page_size < 4096*1024) error("<4M of mem\n");
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/include/asm-arm26/unistd.h b/include/asm-arm26/unistd.h
new file mode 100644
index 00000000000..dfa0b0c30aa
--- /dev/null
+++ b/include/asm-arm26/unistd.h
@@ -0,0 +1,500 @@
+/*
+ * linux/include/asm-arm/unistd.h
+ *
+ * Copyright (C) 2001-2003 Russell King
+ * Modified 25/11/04 Ian Molton for arm26.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Please forward _all_ changes to this file to spyro@f2s.com
+ * no matter what the change is. Thanks!
+ */
+#ifndef __ASM_ARM_UNISTD_H
+#define __ASM_ARM_UNISTD_H
+
+#include <linux/linkage.h>
+
+#define __NR_SYSCALL_BASE 0x900000
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0)
+#define __NR_exit (__NR_SYSCALL_BASE+ 1)
+#define __NR_fork (__NR_SYSCALL_BASE+ 2)
+#define __NR_read (__NR_SYSCALL_BASE+ 3)
+#define __NR_write (__NR_SYSCALL_BASE+ 4)
+#define __NR_open (__NR_SYSCALL_BASE+ 5)
+#define __NR_close (__NR_SYSCALL_BASE+ 6)
+ /* 7 was sys_waitpid */
+#define __NR_creat (__NR_SYSCALL_BASE+ 8)
+#define __NR_link (__NR_SYSCALL_BASE+ 9)
+#define __NR_unlink (__NR_SYSCALL_BASE+ 10)
+#define __NR_execve (__NR_SYSCALL_BASE+ 11)
+#define __NR_chdir (__NR_SYSCALL_BASE+ 12)
+#define __NR_time (__NR_SYSCALL_BASE+ 13)
+#define __NR_mknod (__NR_SYSCALL_BASE+ 14)
+#define __NR_chmod (__NR_SYSCALL_BASE+ 15)
+#define __NR_lchown (__NR_SYSCALL_BASE+ 16)
+ /* 17 was sys_break */
+ /* 18 was sys_stat */
+#define __NR_lseek (__NR_SYSCALL_BASE+ 19)
+#define __NR_getpid (__NR_SYSCALL_BASE+ 20)
+#define __NR_mount (__NR_SYSCALL_BASE+ 21)
+#define __NR_umount (__NR_SYSCALL_BASE+ 22)
+#define __NR_setuid (__NR_SYSCALL_BASE+ 23)
+#define __NR_getuid (__NR_SYSCALL_BASE+ 24)
+#define __NR_stime (__NR_SYSCALL_BASE+ 25)
+#define __NR_ptrace (__NR_SYSCALL_BASE+ 26)
+#define __NR_alarm (__NR_SYSCALL_BASE+ 27)
+ /* 28 was sys_fstat */
+#define __NR_pause (__NR_SYSCALL_BASE+ 29)
+#define __NR_utime (__NR_SYSCALL_BASE+ 30)
+ /* 31 was sys_stty */
+ /* 32 was sys_gtty */
+#define __NR_access (__NR_SYSCALL_BASE+ 33)
+#define __NR_nice (__NR_SYSCALL_BASE+ 34)
+ /* 35 was sys_ftime */
+#define __NR_sync (__NR_SYSCALL_BASE+ 36)
+#define __NR_kill (__NR_SYSCALL_BASE+ 37)
+#define __NR_rename (__NR_SYSCALL_BASE+ 38)
+#define __NR_mkdir (__NR_SYSCALL_BASE+ 39)
+#define __NR_rmdir (__NR_SYSCALL_BASE+ 40)
+#define __NR_dup (__NR_SYSCALL_BASE+ 41)
+#define __NR_pipe (__NR_SYSCALL_BASE+ 42)
+#define __NR_times (__NR_SYSCALL_BASE+ 43)
+ /* 44 was sys_prof */
+#define __NR_brk (__NR_SYSCALL_BASE+ 45)
+#define __NR_setgid (__NR_SYSCALL_BASE+ 46)
+#define __NR_getgid (__NR_SYSCALL_BASE+ 47)
+ /* 48 was sys_signal */
+#define __NR_geteuid (__NR_SYSCALL_BASE+ 49)
+#define __NR_getegid (__NR_SYSCALL_BASE+ 50)
+#define __NR_acct (__NR_SYSCALL_BASE+ 51)
+#define __NR_umount2 (__NR_SYSCALL_BASE+ 52)
+ /* 53 was sys_lock */
+#define __NR_ioctl (__NR_SYSCALL_BASE+ 54)
+#define __NR_fcntl (__NR_SYSCALL_BASE+ 55)
+ /* 56 was sys_mpx */
+#define __NR_setpgid (__NR_SYSCALL_BASE+ 57)
+ /* 58 was sys_ulimit */
+ /* 59 was sys_olduname */
+#define __NR_umask (__NR_SYSCALL_BASE+ 60)
+#define __NR_chroot (__NR_SYSCALL_BASE+ 61)
+#define __NR_ustat (__NR_SYSCALL_BASE+ 62)
+#define __NR_dup2 (__NR_SYSCALL_BASE+ 63)
+#define __NR_getppid (__NR_SYSCALL_BASE+ 64)
+#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65)
+#define __NR_setsid (__NR_SYSCALL_BASE+ 66)
+#define __NR_sigaction (__NR_SYSCALL_BASE+ 67)
+ /* 68 was sys_sgetmask */
+ /* 69 was sys_ssetmask */
+#define __NR_setreuid (__NR_SYSCALL_BASE+ 70)
+#define __NR_setregid (__NR_SYSCALL_BASE+ 71)
+#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72)
+#define __NR_sigpending (__NR_SYSCALL_BASE+ 73)
+#define __NR_sethostname (__NR_SYSCALL_BASE+ 74)
+#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75)
+#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */
+#define __NR_getrusage (__NR_SYSCALL_BASE+ 77)
+#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78)
+#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79)
+#define __NR_getgroups (__NR_SYSCALL_BASE+ 80)
+#define __NR_setgroups (__NR_SYSCALL_BASE+ 81)
+#define __NR_select (__NR_SYSCALL_BASE+ 82)
+#define __NR_symlink (__NR_SYSCALL_BASE+ 83)
+ /* 84 was sys_lstat */
+#define __NR_readlink (__NR_SYSCALL_BASE+ 85)
+#define __NR_uselib (__NR_SYSCALL_BASE+ 86)
+#define __NR_swapon (__NR_SYSCALL_BASE+ 87)
+#define __NR_reboot (__NR_SYSCALL_BASE+ 88)
+#define __NR_readdir (__NR_SYSCALL_BASE+ 89)
+#define __NR_mmap (__NR_SYSCALL_BASE+ 90)
+#define __NR_munmap (__NR_SYSCALL_BASE+ 91)
+#define __NR_truncate (__NR_SYSCALL_BASE+ 92)
+#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93)
+#define __NR_fchmod (__NR_SYSCALL_BASE+ 94)
+#define __NR_fchown (__NR_SYSCALL_BASE+ 95)
+#define __NR_getpriority (__NR_SYSCALL_BASE+ 96)
+#define __NR_setpriority (__NR_SYSCALL_BASE+ 97)
+ /* 98 was sys_profil */
+#define __NR_statfs (__NR_SYSCALL_BASE+ 99)
+#define __NR_fstatfs (__NR_SYSCALL_BASE+100)
+ /* 101 was sys_ioperm */
+#define __NR_socketcall (__NR_SYSCALL_BASE+102)
+#define __NR_syslog (__NR_SYSCALL_BASE+103)
+#define __NR_setitimer (__NR_SYSCALL_BASE+104)
+#define __NR_getitimer (__NR_SYSCALL_BASE+105)
+#define __NR_stat (__NR_SYSCALL_BASE+106)
+#define __NR_lstat (__NR_SYSCALL_BASE+107)
+#define __NR_fstat (__NR_SYSCALL_BASE+108)
+ /* 109 was sys_uname */
+ /* 110 was sys_iopl */
+#define __NR_vhangup (__NR_SYSCALL_BASE+111)
+ /* 112 was sys_idle */
+#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
+#define __NR_wait4 (__NR_SYSCALL_BASE+114)
+#define __NR_swapoff (__NR_SYSCALL_BASE+115)
+#define __NR_sysinfo (__NR_SYSCALL_BASE+116)
+#define __NR_ipc (__NR_SYSCALL_BASE+117)
+#define __NR_fsync (__NR_SYSCALL_BASE+118)
+#define __NR_sigreturn (__NR_SYSCALL_BASE+119)
+#define __NR_clone (__NR_SYSCALL_BASE+120)
+#define __NR_setdomainname (__NR_SYSCALL_BASE+121)
+#define __NR_uname (__NR_SYSCALL_BASE+122)
+ /* 123 was sys_modify_ldt */
+#define __NR_adjtimex (__NR_SYSCALL_BASE+124)
+#define __NR_mprotect (__NR_SYSCALL_BASE+125)
+#define __NR_sigprocmask (__NR_SYSCALL_BASE+126)
+ /* 127 was sys_create_module */
+#define __NR_init_module (__NR_SYSCALL_BASE+128)
+#define __NR_delete_module (__NR_SYSCALL_BASE+129)
+ /* 130 was sys_get_kernel_syms */
+#define __NR_quotactl (__NR_SYSCALL_BASE+131)
+#define __NR_getpgid (__NR_SYSCALL_BASE+132)
+#define __NR_fchdir (__NR_SYSCALL_BASE+133)
+#define __NR_bdflush (__NR_SYSCALL_BASE+134)
+#define __NR_sysfs (__NR_SYSCALL_BASE+135)
+#define __NR_personality (__NR_SYSCALL_BASE+136)
+ /* 137 was sys_afs_syscall */
+#define __NR_setfsuid (__NR_SYSCALL_BASE+138)
+#define __NR_setfsgid (__NR_SYSCALL_BASE+139)
+#define __NR__llseek (__NR_SYSCALL_BASE+140)
+#define __NR_getdents (__NR_SYSCALL_BASE+141)
+#define __NR__newselect (__NR_SYSCALL_BASE+142)
+#define __NR_flock (__NR_SYSCALL_BASE+143)
+#define __NR_msync (__NR_SYSCALL_BASE+144)
+#define __NR_readv (__NR_SYSCALL_BASE+145)
+#define __NR_writev (__NR_SYSCALL_BASE+146)
+#define __NR_getsid (__NR_SYSCALL_BASE+147)
+#define __NR_fdatasync (__NR_SYSCALL_BASE+148)
+#define __NR__sysctl (__NR_SYSCALL_BASE+149)
+#define __NR_mlock (__NR_SYSCALL_BASE+150)
+#define __NR_munlock (__NR_SYSCALL_BASE+151)
+#define __NR_mlockall (__NR_SYSCALL_BASE+152)
+#define __NR_munlockall (__NR_SYSCALL_BASE+153)
+#define __NR_sched_setparam (__NR_SYSCALL_BASE+154)
+#define __NR_sched_getparam (__NR_SYSCALL_BASE+155)
+#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156)
+#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157)
+#define __NR_sched_yield (__NR_SYSCALL_BASE+158)
+#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159)
+#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160)
+#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161)
+#define __NR_nanosleep (__NR_SYSCALL_BASE+162)
+#define __NR_mremap (__NR_SYSCALL_BASE+163)
+#define __NR_setresuid (__NR_SYSCALL_BASE+164)
+#define __NR_getresuid (__NR_SYSCALL_BASE+165)
+ /* 166 was sys_vm86 */
+ /* 167 was sys_query_module */
+#define __NR_poll (__NR_SYSCALL_BASE+168)
+#define __NR_nfsservctl (__NR_SYSCALL_BASE+169)
+#define __NR_setresgid (__NR_SYSCALL_BASE+170)
+#define __NR_getresgid (__NR_SYSCALL_BASE+171)
+#define __NR_prctl (__NR_SYSCALL_BASE+172)
+#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173)
+#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174)
+#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175)
+#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176)
+#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177)
+#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178)
+#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179)
+#define __NR_pread64 (__NR_SYSCALL_BASE+180)
+#define __NR_pwrite64 (__NR_SYSCALL_BASE+181)
+#define __NR_chown (__NR_SYSCALL_BASE+182)
+#define __NR_getcwd (__NR_SYSCALL_BASE+183)
+#define __NR_capget (__NR_SYSCALL_BASE+184)
+#define __NR_capset (__NR_SYSCALL_BASE+185)
+#define __NR_sigaltstack (__NR_SYSCALL_BASE+186)
+#define __NR_sendfile (__NR_SYSCALL_BASE+187)
+ /* 188 reserved */
+ /* 189 reserved */
+#define __NR_vfork (__NR_SYSCALL_BASE+190)
+#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */
+#define __NR_mmap2 (__NR_SYSCALL_BASE+192)
+#define __NR_truncate64 (__NR_SYSCALL_BASE+193)
+#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194)
+#define __NR_stat64 (__NR_SYSCALL_BASE+195)
+#define __NR_lstat64 (__NR_SYSCALL_BASE+196)
+#define __NR_fstat64 (__NR_SYSCALL_BASE+197)
+#define __NR_lchown32 (__NR_SYSCALL_BASE+198)
+#define __NR_getuid32 (__NR_SYSCALL_BASE+199)
+#define __NR_getgid32 (__NR_SYSCALL_BASE+200)
+#define __NR_geteuid32 (__NR_SYSCALL_BASE+201)
+#define __NR_getegid32 (__NR_SYSCALL_BASE+202)
+#define __NR_setreuid32 (__NR_SYSCALL_BASE+203)
+#define __NR_setregid32 (__NR_SYSCALL_BASE+204)
+#define __NR_getgroups32 (__NR_SYSCALL_BASE+205)
+#define __NR_setgroups32 (__NR_SYSCALL_BASE+206)
+#define __NR_fchown32 (__NR_SYSCALL_BASE+207)
+#define __NR_setresuid32 (__NR_SYSCALL_BASE+208)
+#define __NR_getresuid32 (__NR_SYSCALL_BASE+209)
+#define __NR_setresgid32 (__NR_SYSCALL_BASE+210)
+#define __NR_getresgid32 (__NR_SYSCALL_BASE+211)
+#define __NR_chown32 (__NR_SYSCALL_BASE+212)
+#define __NR_setuid32 (__NR_SYSCALL_BASE+213)
+#define __NR_setgid32 (__NR_SYSCALL_BASE+214)
+#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215)
+#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216)
+#define __NR_getdents64 (__NR_SYSCALL_BASE+217)
+#define __NR_pivot_root (__NR_SYSCALL_BASE+218)
+#define __NR_mincore (__NR_SYSCALL_BASE+219)
+#define __NR_madvise (__NR_SYSCALL_BASE+220)
+#define __NR_fcntl64 (__NR_SYSCALL_BASE+221)
+ /* 222 for tux */
+ /* 223 is unused */
+#define __NR_gettid (__NR_SYSCALL_BASE+224)
+#define __NR_readahead (__NR_SYSCALL_BASE+225)
+#define __NR_setxattr (__NR_SYSCALL_BASE+226)
+#define __NR_lsetxattr (__NR_SYSCALL_BASE+227)
+#define __NR_fsetxattr (__NR_SYSCALL_BASE+228)
+#define __NR_getxattr (__NR_SYSCALL_BASE+229)
+#define __NR_lgetxattr (__NR_SYSCALL_BASE+230)
+#define __NR_fgetxattr (__NR_SYSCALL_BASE+231)
+#define __NR_listxattr (__NR_SYSCALL_BASE+232)
+#define __NR_llistxattr (__NR_SYSCALL_BASE+233)
+#define __NR_flistxattr (__NR_SYSCALL_BASE+234)
+#define __NR_removexattr (__NR_SYSCALL_BASE+235)
+#define __NR_lremovexattr (__NR_SYSCALL_BASE+236)
+#define __NR_fremovexattr (__NR_SYSCALL_BASE+237)
+#define __NR_tkill (__NR_SYSCALL_BASE+238)
+#define __NR_sendfile64 (__NR_SYSCALL_BASE+239)
+#define __NR_futex (__NR_SYSCALL_BASE+240)
+#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241)
+#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242)
+#define __NR_io_setup (__NR_SYSCALL_BASE+243)
+#define __NR_io_destroy (__NR_SYSCALL_BASE+244)
+#define __NR_io_getevents (__NR_SYSCALL_BASE+245)
+#define __NR_io_submit (__NR_SYSCALL_BASE+246)
+#define __NR_io_cancel (__NR_SYSCALL_BASE+247)
+#define __NR_exit_group (__NR_SYSCALL_BASE+248)
+#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249)
+#define __NR_epoll_create (__NR_SYSCALL_BASE+250)
+#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251)
+#define __NR_epoll_wait (__NR_SYSCALL_BASE+252)
+#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253)
+ /* 254 for set_thread_area */
+ /* 255 for get_thread_area */
+ /* 256 for set_tid_address */
+#define __NR_timer_create (__NR_SYSCALL_BASE+257)
+#define __NR_timer_settime (__NR_SYSCALL_BASE+258)
+#define __NR_timer_gettime (__NR_SYSCALL_BASE+259)
+#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260)
+#define __NR_timer_delete (__NR_SYSCALL_BASE+261)
+#define __NR_clock_settime (__NR_SYSCALL_BASE+262)
+#define __NR_clock_gettime (__NR_SYSCALL_BASE+263)
+#define __NR_clock_getres (__NR_SYSCALL_BASE+264)
+#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265)
+#define __NR_statfs64 (__NR_SYSCALL_BASE+266)
+#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267)
+#define __NR_tgkill (__NR_SYSCALL_BASE+268)
+#define __NR_utimes (__NR_SYSCALL_BASE+269)
+#define __NR_fadvise64_64 (__NR_SYSCALL_BASE+270)
+#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271)
+#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272)
+#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273)
+#define __NR_mq_open (__NR_SYSCALL_BASE+274)
+#define __NR_mq_unlink (__NR_SYSCALL_BASE+275)
+#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276)
+#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277)
+#define __NR_mq_notify (__NR_SYSCALL_BASE+278)
+#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279)
+#define __NR_waitid (__NR_SYSCALL_BASE+280)
+
+/*
+ * The following SWIs are ARM private. FIXME - make appropriate for arm26
+ */
+#define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000)
+#define __ARM_NR_breakpoint (__ARM_NR_BASE+1)
+#define __ARM_NR_cacheflush (__ARM_NR_BASE+2)
+#define __ARM_NR_usr26 (__ARM_NR_BASE+3)
+
+#define __sys2(x) #x
+#define __sys1(x) __sys2(x)
+
+#ifndef __syscall
+#define __syscall(name) "swi\t" __sys1(__NR_##name) ""
+#endif
+
+#define __syscall_return(type, res) \
+do { \
+ if ((unsigned long)(res) >= (unsigned long)(-125)) { \
+ errno = -(res); \
+ res = -1; \
+ } \
+ return (type) (res); \
+} while (0)
+
+#define _syscall0(type,name) \
+type name(void) { \
+ register long __res_r0 __asm__("r0"); \
+ long __res; \
+ __asm__ __volatile__ ( \
+ __syscall(name) \
+ : "=r" (__res_r0) \
+ : \
+ : "lr"); \
+ __res = __res_r0; \
+ __syscall_return(type,__res); \
+}
+
+#define _syscall1(type,name,type1,arg1) \
+type name(type1 arg1) { \
+ register long __r0 __asm__("r0") = (long)arg1; \
+ register long __res_r0 __asm__("r0"); \
+ long __res; \
+ __asm__ __volatile__ ( \
+ __syscall(name) \
+ : "=r" (__res_r0) \
+ : "r" (__r0) \
+ : "lr"); \
+ __res = __res_r0; \
+ __syscall_return(type,__res); \
+}
+
+#define _syscall2(type,name,type1,arg1,type2,arg2) \
+type name(type1 arg1,type2 arg2) { \
+ register long __r0 __asm__("r0") = (long)arg1; \
+ register long __r1 __asm__("r1") = (long)arg2; \
+ register long __res_r0 __asm__("r0"); \
+ long __res; \
+ __asm__ __volatile__ ( \
+ __syscall(name) \
+ : "=r" (__res_r0) \
+ : "r" (__r0),"r" (__r1) \
+ : "lr"); \
+ __res = __res_r0; \
+ __syscall_return(type,__res); \
+}
+
+
+#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
+type name(type1 arg1,type2 arg2,type3 arg3) { \
+ register long __r0 __asm__("r0") = (long)arg1; \
+ register long __r1 __asm__("r1") = (long)arg2; \
+ register long __r2 __asm__("r2") = (long)arg3; \
+ register long __res_r0 __asm__("r0"); \
+ long __res; \
+ __asm__ __volatile__ ( \
+ __syscall(name) \
+ : "=r" (__res_r0) \
+ : "r" (__r0),"r" (__r1),"r" (__r2) \
+ : "lr"); \
+ __res = __res_r0; \
+ __syscall_return(type,__res); \
+}
+
+
+#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4)\
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4) { \
+ register long __r0 __asm__("r0") = (long)arg1; \
+ register long __r1 __asm__("r1") = (long)arg2; \
+ register long __r2 __asm__("r2") = (long)arg3; \
+ register long __r3 __asm__("r3") = (long)arg4; \
+ register long __res_r0 __asm__("r0"); \
+ long __res; \
+ __asm__ __volatile__ ( \
+ __syscall(name) \
+ : "=r" (__res_r0) \
+ : "r" (__r0),"r" (__r1),"r" (__r2),"r" (__r3) \
+ : "lr"); \
+ __res = __res_r0; \
+ __syscall_return(type,__res); \
+}
+
+
+#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) { \
+ register long __r0 __asm__("r0") = (long)arg1; \
+ register long __r1 __asm__("r1") = (long)arg2; \
+ register long __r2 __asm__("r2") = (long)arg3; \
+ register long __r3 __asm__("r3") = (long)arg4; \
+ register long __r4 __asm__("r4") = (long)arg5; \
+ register long __res_r0 __asm__("r0"); \
+ long __res; \
+ __asm__ __volatile__ ( \
+ __syscall(name) \
+ : "=r" (__res_r0) \
+ : "r" (__r0),"r" (__r1),"r" (__r2),"r" (__r3),"r" (__r4) \
+ : "lr"); \
+ __res = __res_r0; \
+ __syscall_return(type,__res); \
+}
+
+#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5,type6,arg6) \
+type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6) { \
+ register long __r0 __asm__("r0") = (long)arg1; \
+ register long __r1 __asm__("r1") = (long)arg2; \
+ register long __r2 __asm__("r2") = (long)arg3; \
+ register long __r3 __asm__("r3") = (long)arg4; \
+ register long __r4 __asm__("r4") = (long)arg5; \
+ register long __r5 __asm__("r5") = (long)arg6; \
+ register long __res_r0 __asm__("r0"); \
+ long __res; \
+ __asm__ __volatile__ ( \
+ __syscall(name) \
+ : "=r" (__res_r0) \
+ : "r" (__r0),"r" (__r1),"r" (__r2),"r" (__r3), "r" (__r4),"r" (__r5) \
+ : "lr"); \
+ __res = __res_r0; \
+ __syscall_return(type,__res); \
+}
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/syscalls.h>
+
+extern long execve(const char *file, char **argv, char **envp);
+
+struct pt_regs;
+asmlinkage int sys_execve(char *filenamei, char **argv, char **envp,
+ struct pt_regs *regs);
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp,
+ struct pt_regs *regs);
+asmlinkage int sys_fork(struct pt_regs *regs);
+asmlinkage int sys_vfork(struct pt_regs *regs);
+asmlinkage int sys_pipe(unsigned long *fildes);
+asmlinkage int sys_ptrace(long request, long pid, long addr, long data);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+ const struct sigaction __user *act,
+ struct sigaction __user *oact,
+ size_t sigsetsize);
+
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __ASM_ARM_UNISTD_H */
diff --git a/include/asm-arm26/user.h b/include/asm-arm26/user.h
new file mode 100644
index 00000000000..3e8b0f87915
--- /dev/null
+++ b/include/asm-arm26/user.h
@@ -0,0 +1,84 @@
+#ifndef _ARM_USER_H
+#define _ARM_USER_H
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+/* Core file format: The core file is written in such a way that gdb
+ can understand it and provide useful information to the user (under
+ linux we use the 'trad-core' bfd). There are quite a number of
+ obstacles to being able to view the contents of the floating point
+ registers, and until these are solved you will not be able to view the
+ contents of them. Actually, you can read in the core file and look at
+ the contents of the user struct to find out what the floating point
+ registers contain.
+ The actual file contents are as follows:
+ UPAGE: 1 page consisting of a user struct that tells gdb what is present
+ in the file. Directly after this is a copy of the task_struct, which
+ is currently not used by gdb, but it may come in useful at some point.
+ All of the registers are stored as part of the upage. The upage should
+ always be only one page.
+ DATA: The data area is stored. We use current->end_text to
+ current->brk to pick up all of the user variables, plus any memory
+ that may have been malloced. No attempt is made to determine if a page
+ is demand-zero or if a page is totally unused, we just cover the entire
+ range. All of the addresses are rounded in such a way that an integral
+ number of pages is written.
+ STACK: We need the stack information in order to get a meaningful
+ backtrace. We need to write the data from (esp) to
+ current->start_stack, so we round each of these off in order to be able
+ to write an integer number of pages.
+ The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+struct user_fp {
+ struct fp_reg {
+ unsigned int sign1:1;
+ unsigned int unused:15;
+ unsigned int sign2:1;
+ unsigned int exponent:14;
+ unsigned int j:1;
+ unsigned int mantissa1:31;
+ unsigned int mantissa0:32;
+ } fpregs[8];
+ unsigned int fpsr:32;
+ unsigned int fpcr:32;
+ unsigned char ftype[8];
+ unsigned int init_flag;
+};
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+ this will be used by gdb to figure out where the data and stack segments
+ are within the file, and what virtual addresses to use. */
+struct user{
+/* We start with the registers, to mimic the way that "memory" is returned
+ from the ptrace(3,...) function. */
+ struct pt_regs regs; /* Where the registers are actually stored */
+/* ptrace does not yet supply these. Someday.... */
+ int u_fpvalid; /* True if math co-processor being used. */
+ /* for this mess. Not yet used. */
+/* The rest of this junk is to help gdb figure out what goes where */
+ unsigned long int u_tsize; /* Text segment size (pages). */
+ unsigned long int u_dsize; /* Data segment size (pages). */
+ unsigned long int u_ssize; /* Stack segment size (pages). */
+ unsigned long start_code; /* Starting virtual address of text. */
+ unsigned long start_stack; /* Starting virtual address of stack area.
+ This is actually the bottom of the stack,
+ the top of the stack is always found in the
+ esp register. */
+ long int signal; /* Signal that caused the core dump. */
+ int reserved; /* No longer used */
+ struct pt_regs * u_ar0; /* Used by gdb to help find the values for */
+ /* the registers. */
+ unsigned long magic; /* To uniquely identify a core file */
+ char u_comm[32]; /* User command that was responsible */
+ int u_debugreg[8];
+ struct user_fp u_fp; /* FP state */
+ struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */
+ /* the FP registers. */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ARM_USER_H */
diff --git a/include/asm-arm26/xor.h b/include/asm-arm26/xor.h
new file mode 100644
index 00000000000..e7c4cf58bed
--- /dev/null
+++ b/include/asm-arm26/xor.h
@@ -0,0 +1,141 @@
+/*
+ * linux/include/asm-arm/xor.h
+ *
+ * Copyright (C) 2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm-generic/xor.h>
+
+#define __XOR(a1, a2) a1 ^= a2
+
+#define GET_BLOCK_2(dst) \
+ __asm__("ldmia %0, {%1, %2}" \
+ : "=r" (dst), "=r" (a1), "=r" (a2) \
+ : "0" (dst))
+
+#define GET_BLOCK_4(dst) \
+ __asm__("ldmia %0, {%1, %2, %3, %4}" \
+ : "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \
+ : "0" (dst))
+
+#define XOR_BLOCK_2(src) \
+ __asm__("ldmia %0!, {%1, %2}" \
+ : "=r" (src), "=r" (b1), "=r" (b2) \
+ : "0" (src)); \
+ __XOR(a1, b1); __XOR(a2, b2);
+
+#define XOR_BLOCK_4(src) \
+ __asm__("ldmia %0!, {%1, %2, %3, %4}" \
+ : "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \
+ : "0" (src)); \
+ __XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4)
+
+#define PUT_BLOCK_2(dst) \
+ __asm__ __volatile__("stmia %0!, {%2, %3}" \
+ : "=r" (dst) \
+ : "0" (dst), "r" (a1), "r" (a2))
+
+#define PUT_BLOCK_4(dst) \
+ __asm__ __volatile__("stmia %0!, {%2, %3, %4, %5}" \
+ : "=r" (dst) \
+ : "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
+
+static void
+xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+ unsigned int lines = bytes / sizeof(unsigned long) / 4;
+ register unsigned int a1 __asm__("r4");
+ register unsigned int a2 __asm__("r5");
+ register unsigned int a3 __asm__("r6");
+ register unsigned int a4 __asm__("r7");
+ register unsigned int b1 __asm__("r8");
+ register unsigned int b2 __asm__("r9");
+ register unsigned int b3 __asm__("ip");
+ register unsigned int b4 __asm__("lr");
+
+ do {
+ GET_BLOCK_4(p1);
+ XOR_BLOCK_4(p2);
+ PUT_BLOCK_4(p1);
+ } while (--lines);
+}
+
+static void
+xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+ unsigned long *p3)
+{
+ unsigned int lines = bytes / sizeof(unsigned long) / 4;
+ register unsigned int a1 __asm__("r4");
+ register unsigned int a2 __asm__("r5");
+ register unsigned int a3 __asm__("r6");
+ register unsigned int a4 __asm__("r7");
+ register unsigned int b1 __asm__("r8");
+ register unsigned int b2 __asm__("r9");
+ register unsigned int b3 __asm__("ip");
+ register unsigned int b4 __asm__("lr");
+
+ do {
+ GET_BLOCK_4(p1);
+ XOR_BLOCK_4(p2);
+ XOR_BLOCK_4(p3);
+ PUT_BLOCK_4(p1);
+ } while (--lines);
+}
+
+static void
+xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+ unsigned long *p3, unsigned long *p4)
+{
+ unsigned int lines = bytes / sizeof(unsigned long) / 2;
+ register unsigned int a1 __asm__("r8");
+ register unsigned int a2 __asm__("r9");
+ register unsigned int b1 __asm__("ip");
+ register unsigned int b2 __asm__("lr");
+
+ do {
+ GET_BLOCK_2(p1);
+ XOR_BLOCK_2(p2);
+ XOR_BLOCK_2(p3);
+ XOR_BLOCK_2(p4);
+ PUT_BLOCK_2(p1);
+ } while (--lines);
+}
+
+static void
+xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+ unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+ unsigned int lines = bytes / sizeof(unsigned long) / 2;
+ register unsigned int a1 __asm__("r8");
+ register unsigned int a2 __asm__("r9");
+ register unsigned int b1 __asm__("ip");
+ register unsigned int b2 __asm__("lr");
+
+ do {
+ GET_BLOCK_2(p1);
+ XOR_BLOCK_2(p2);
+ XOR_BLOCK_2(p3);
+ XOR_BLOCK_2(p4);
+ XOR_BLOCK_2(p5);
+ PUT_BLOCK_2(p1);
+ } while (--lines);
+}
+
+static struct xor_block_template xor_block_arm4regs = {
+ .name = "arm4regs",
+ .do_2 = xor_arm4regs_2,
+ .do_3 = xor_arm4regs_3,
+ .do_4 = xor_arm4regs_4,
+ .do_5 = xor_arm4regs_5,
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES \
+ do { \
+ xor_speed(&xor_block_arm4regs); \
+ xor_speed(&xor_block_8regs); \
+ xor_speed(&xor_block_32regs); \
+ } while (0)