Blackfin arch: cleanup and standardize anomaly.h file format -- no functional changes

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

1 files changed, 57 insertions, 79 deletions

diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
index 7302f290b93..2a63ffc250a 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -1,31 +1,9 @@
 /*
- * File:         include/asm-blackfin/mach-bf533/anomaly.h
- * Based on:
- * Author:
+ * File: include/asm-blackfin/mach-bf533/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
@@ -43,44 +21,44 @@
 #endif
 
 /* Issues that are common to 0.5, 0.4, and 0.3 silicon */
-#if  (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) \
+#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) \
 		|| defined(CONFIG_BF_REV_0_3))
 #define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
-                            slot1 and store of a P register in slot 2 is not
-                            supported */
+			  * slot1 and store of a P register in slot 2 is not
+			  * supported */
 #define ANOMALY_05000105 /* Watchpoint Status Register (WPSTAT) bits are set on
-                            every corresponding match */
+			  * every corresponding match */
 #define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
-                            Channel DMA stops */
+			  * Channel DMA stops */
 #define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
-                            registers. */
+			  * registers. */
 #define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
-                            upper bits*/
+			  * upper bits*/
 #define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */
 #define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
-                            syncs */
+			  * syncs */
 #define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not
-                            functional */
+			  * functional */
 #define ANOMALY_05000219 /* NMI event at boot time results in unpredictable
-                            state */
+			  * state */
 #define ANOMALY_05000229 /* SPI Slave Boot Mode modifies registers */
 #define ANOMALY_05000272 /* Certain data cache write through modes fail for
-                            VDDint <=0.9V */
+			  * VDDint <=0.9V */
 #define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */
 #define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after
-                            an edge is detected may clear interrupt */
+			  * an edge is detected may clear interrupt */
 #define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
-                            DMA system instability */
+			  * DMA system instability */
 #define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
-                            not restored */
+			  * not restored */
 #define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic
-                            control */
+			  * control */
 #define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when
-                            killed in a particular stage*/
+			  * killed in a particular stage*/
 #define ANOMALY_05000311 /* Erroneous flag pin operations under specific
-			    sequences */
+			  * sequences */
 #define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
-			    registers are interrupted */
+			  * registers are interrupted */
 #define ANOMALY_05000313 /* PPI Is Level-Sensitive on First Transfer  */
 #define ANOMALY_05000315 /* Killed System MMR Write Completes Erroneously On
 			  *  Next System MMR Access */
@@ -91,90 +69,90 @@
 /* These issues only occur on 0.3 or 0.4 BF533 */
 #if (defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3))
 #define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not
-                            updated at the same time. */
+			  * updated at the same time. */
 #define ANOMALY_05000158 /* Boot fails when data cache enabled: Data from a Data
-        		    Cache Fill can be corrupted after or during
-                            Instruction DMA if certain core stalls exist */
+			  * Cache Fill can be corrupted after or during
+			  * Instruction DMA if certain core stalls exist */
 #define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General
-                            Purpose TX or RX modes */
+			  * Purpose TX or RX modes */
 #define ANOMALY_05000198 /* Failing SYSTEM MMR accesses when stalled by
-                            preceding memory read */
+			  * preceding memory read */
 #define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during
-                            inactive channels in certain conditions */
+			  * inactive channels in certain conditions */
 #define ANOMALY_05000202 /* Possible infinite stall with specific dual dag
-                            situation */
+			  * situation */
 #define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */
 #define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */
 #define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect
-                            data*/
+			  * data*/
 #define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate
-                            Differences in certain Conditions */
+			  * Differences in certain Conditions */
 #define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */
 #define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to
-                            hardware reset */
+			  * hardware reset */
 #define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or
-                            IDLE around a Change of Control causes
-                            unpredictable results */
+			  * IDLE around a Change of Control causes
+			  * unpredictable results */
 #define ANOMALY_05000245 /* Spurious Hardware Error from an access in the
-                            shadow of a conditional branch */
+			  * shadow of a conditional branch */
 #define ANOMALY_05000246 /* Data CPLB's should prevent spurious hardware
-                            errors */
+			  * errors */
 #define ANOMALY_05000253 /* Maximum external clock speed for Timers */
 #define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
-                            interrupt not functional */
+			  * interrupt not functional */
 #define ANOMALY_05000257 /* An interrupt or exception during short Hardware
-                            loops may cause the instruction fetch unit to
-                            malfunction */
+			  * loops may cause the instruction fetch unit to
+			  * malfunction */
 #define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of
-                            the ICPLB Data registers differ */
+			  * the ICPLB Data registers differ */
 #define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
 #define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
 #define ANOMALY_05000262 /* Stores to data cache may be lost */
 #define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */
 #define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE
-                            instruction will cause an infinite stall in the
-                            second to last instruction in a hardware loop */
+			  * instruction will cause an infinite stall in the
+			  * second to last instruction in a hardware loop */
 #define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
-                            SPORT external receive and transmit clocks. */
+			  * SPORT external receive and transmit clocks. */
 #define ANOMALY_05000269 /* High I/O activity causes the output voltage of the
-                            internal voltage regulator (VDDint) to increase. */
+			  * internal voltage regulator (VDDint) to increase. */
 #define ANOMALY_05000270 /* High I/O activity causes the output voltage of the
-                            internal voltage regulator (VDDint) to decrease */
+			  * internal voltage regulator (VDDint) to decrease */
 #endif /* issues only occur on 0.3 or 0.4 BF533 */
 
 /* These issues are only on 0.4 silicon */
 #if (defined(CONFIG_BF_REV_0_4))
 #define ANOMALY_05000234 /* Incorrect Revision Number in DSPID Register */
 #define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
-                            (TDM) */
+			  * (TDM) */
 #endif /* issues are only on 0.4 silicon */
 
 /* These issues are only on 0.3 silicon */
 #if defined(CONFIG_BF_REV_0_3)
 #define ANOMALY_05000183 /* Timer Pin limitations for PPI TX Modes with
-                            External Frame Syncs */
+			  * External Frame Syncs */
 #define ANOMALY_05000189 /* False Protection Exceptions caused by Speculative
-                            Instruction or Data Fetches, or by Fetches at the
-                            boundary of reserved memory space */
+			  * Instruction or Data Fetches, or by Fetches at the
+			  * boundary of reserved memory space */
 #define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs
-                            when polarity setting is changed */
+			  * when polarity setting is changed */
 #define ANOMALY_05000194 /* Sport Restarting in specific modes may cause data
-                            corruption */
+			  * corruption */
 #define ANOMALY_05000199 /* DMA current address shows wrong value during carry
-                            fix */
+			  * fix */
 #define ANOMALY_05000201 /* Receive frame sync not ignored during active
-                            frames in sport MCM */
+			  * frames in sport MCM */
 #define ANOMALY_05000203 /* Specific sequence that can cause DMA error or DMA
-                            stopping */
+			  * stopping */
 #if defined(CONFIG_BF533)
 #define ANOMALY_05000204 /* Incorrect data read with write-through cache and
-                            allocate cache lines on reads only mode */
+			  * allocate cache lines on reads only mode */
 #endif /* CONFIG_BF533 */
 #define ANOMALY_05000207 /* Recovery from "brown-out" condition */
 #define ANOMALY_05000209 /* Speed-Path in computational unit affects certain
-                            instructions */
+			  * instructions */
 #define ANOMALY_05000233 /* PPI_FS3 is not driven in 2 or 3 internal Frame
-                            Sync Transmit Mode */
+			  * Sync Transmit Mode */
 #define ANOMALY_05000271 /* Spontaneous reset of Internal Voltage Regulator */
 #endif /* only on 0.3 silicon */