Blackfin arch: cleanup and standardize anomaly.h file format -- no functional changes

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

1 files changed, 62 insertions, 85 deletions

diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
index f5b32d66517..5a7986a83be 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -1,36 +1,13 @@
-
 /*
- * File:         include/asm-blackfin/mach-bf561/anomaly.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * File: include/asm-blackfin/mach-bf561/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision L, 10Aug2006; ADSP-BF561 Silicon Anomaly List
+ *  - Revision L, Aug 10, 2006; ADSP-BF561 Silicon Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -42,142 +19,142 @@
 #endif
 
 /* Issues that are common to 0.5 and  0.3 silicon */
-#if  (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3))
+#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3))
 #define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
-                            slot1 and store of a P register in slot 2 is not
-                            supported */
+			  * slot1 and store of a P register in slot 2 is not
+			  * supported */
 #define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not
-                            updated at the same time. */
+			  * updated at the same time. */
 #define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned
-                            memory locations */
+			  * memory locations */
 #define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR
-                            registers */
+			  * registers */
 #define ANOMALY_05000127 /* Signbits instruction not functional under certain
-                            conditions */
+			  * conditions */
 #define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */
 #define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out
-                            upper bits */
+			  * upper bits */
 #define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */
 #define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame
-                            syncs */
+			  * syncs */
 #define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz
-                            and higher devices */
+			  * and higher devices */
 #define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */
 #define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */
 #define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not
-                            functional */
+			  * functional */
 #define ANOMALY_05000245 /* Spurious Hardware Error from an access in the
-                            shadow of a conditional branch */
+			  * shadow of a conditional branch */
 #define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop
-                            may cause bad instruction fetches */
+			  * may cause bad instruction fetches */
 #define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
-                            external SPORT TX and RX clocks */
+			  * external SPORT TX and RX clocks */
 #define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */
 #define ANOMALY_05000269 /* High I/O activity causes output voltage of internal
-                            voltage regulator (VDDint) to increase */
+			  * voltage regulator (VDDint) to increase */
 #define ANOMALY_05000270 /* High I/O activity causes output voltage of internal
-                            voltage regulator (VDDint) to decrease */
+			  * voltage regulator (VDDint) to decrease */
 #define ANOMALY_05000272 /* Certain data cache write through modes fail for
-                            VDDint <=0.9V */
+			  * VDDint <=0.9V */
 #define ANOMALY_05000274 /* Data cache write back to external synchronous memory
-                            may be lost */
+			  * may be lost */
 #define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */
 #define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC
-			    registers are interrupted */
+			  * registers are interrupted */
 
 #endif /*  (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */
 
-#if  (defined(CONFIG_BF_REV_0_5))
+#if (defined(CONFIG_BF_REV_0_5))
 #define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT
-                            mode with external clock */
+			  * mode with external clock */
 #define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to
-                            using IMDMA */
+			  * using IMDMA */
 #endif
 
-#if  (defined(CONFIG_BF_REV_0_3))
+#if (defined(CONFIG_BF_REV_0_3))
 #define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input)
-                            Mode with 0 Frame Syncs */
+			  * Mode with 0 Frame Syncs */
 #define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */
 #define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through
-                            cache data writes */
+			  * cache data writes */
 #define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */
 #define ANOMALY_05000174 /* Cache Fill Buffer Data lost */
 #define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */
 #define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an
-                            accumulator saturation */
+			  * accumulator saturation */
 #define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General
-                            Purpose TX or RX modes */
+			  * Purpose TX or RX modes */
 #define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration
-                            registers */
+			  * registers */
 #define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with
-                            External Frame Syncs */
+			  * External Frame Syncs */
 #define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */
 #define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits
-                            (not a meaningful mode) */
+			  * (not a meaningful mode) */
 #define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer
-                            Placement in Memory */
+			  * Placement in Memory */
 #define ANOMALY_05000189 /* False Protection Exception */
 #define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs
-                            when polarity setting is changed */
+			  * when polarity setting is changed */
 #define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data
-                            corruption */
+			  * corruption */
 #define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding
-                            memory read */
+			  * memory read */
 #define ANOMALY_05000199 /* DMA current address shows wrong value during carry
-                            fix */
+			  * fix */
 #define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during
-                            inactive channels in certain conditions */
+			  * inactive channels in certain conditions */
 #define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG
-                            situation */
+			  * situation */
 #define ANOMALY_05000204 /* Incorrect data read with write-through cache and
-                            allocate cache lines on reads only mode */
+			  * allocate cache lines on reads only mode */
 #define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA
-                            stopping */
+			  * stopping */
 #define ANOMALY_05000207 /* Recovery from "brown-out" condition */
 #define ANOMALY_05000209 /* Speed-Path in computational unit affects certain
-                            instructions */
+			  * instructions */
 #define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */
 #define ANOMALY_05000219 /* NMI event at boot time results in unpredictable
-                            state */
+			  * state */
 #define ANOMALY_05000220 /* Data Corruption with Cached External Memory and
-                            Non-Cached On-Chip L2 Memory */
+			  * Non-Cached On-Chip L2 Memory */
 #define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */
 #define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect
-                            data */
+			  * data */
 #define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate
-                            Differences in certain Conditions */
+			  * Differences in certain Conditions */
 #define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */
 #define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in
-                            multichannel mode */
+			  * multichannel mode */
 #define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to
-                            hardware reset */
+			  * hardware reset */
 #define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of
-                            Control causes failures */
+			  * Control causes failures */
 #define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */
 #define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel
-                            (TDM) mode in certain conditions */
+			  * (TDM) mode in certain conditions */
 #define ANOMALY_05000251 /* Exception not generated for MMR accesses in
-                            reserved region */
+			  * reserved region */
 #define ANOMALY_05000253 /* Maximum external clock speed for Timers */
 #define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12
-                            of the ICPLB Data registers differ */
+			  * of the ICPLB Data registers differ */
 #define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */
 #define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */
 #define ANOMALY_05000262 /* Stores to data cache may be lost */
 #define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB
-                            exception */
+			  * exception */
 #define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second
-                            to last instruction in hardware loop */
+			  * to last instruction in hardware loop */
 #define ANOMALY_05000276 /* Timing requirements change for External Frame
-                            Sync PPI Modes with non-zero PPI_DELAY */
+			  * Sync PPI Modes with non-zero PPI_DELAY */
 #define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause
-                            DMA system instability */
+			  * DMA system instability */
 #define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
-                            not restored */
+			  * not restored */
 #define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed
-                            in a particular stage */
+			  * in a particular stage */
 #define ANOMALY_05000287 /* A read will receive incorrect data under certain
-                            conditions */
+			  * conditions */
 #define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */
 #endif