Blackfin arch: initial supporting for BF548-EZKIT

The ADSP-BF54x was specifically designed to meet the needs of convergent multimedia
applications where system performance and cost are essential ingredients. The
integration of multimedia, human interface, and connectivity peripherals combined
with increased system bandwidth and on-chip memory provides customers a platform to
design the most demanding applications.

Since now, ADSP-BF54x will be supported in the Linux kernel and bunch of related drivers
such as USB OTG, ATAPI, NAND flash controller, LCD framebuffer, sound, touch screen will
be submitted later.

Please enjoy the show.

Signed-off-by: Roy Huang <roy.huang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

17 files changed, 603 insertions, 2688 deletions

diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h
index d98d77ad71f..bc0cca02850 100644
--- a/include/asm-blackfin/gpio.h
+++ b/include/asm-blackfin/gpio.h
@@ -204,6 +204,10 @@
 
 #endif
 
+#ifdef BF548_FAMILY
+#include <asm-blackfin/mach-bf548/gpio.h>
+#endif
+
 #ifdef BF561_FAMILY
 #define MAX_BLACKFIN_GPIOS 48
 #define PORT_FIO0 GPIO_0
@@ -264,6 +268,7 @@ unsigned short get_gpiop_maska(unsigned short);
 unsigned short get_gpiop_maskb(unsigned short);
 unsigned short get_gpiop_data(unsigned short);
 
+#ifndef BF548_FAMILY
 struct gpio_port_t {
 	unsigned short data;
 	unsigned short dummy1;
@@ -299,6 +304,7 @@ struct gpio_port_t {
 	unsigned short dummy16;
 	unsigned short inen;
 };
+#endif
 
 #ifdef CONFIG_PM
 #define PM_WAKE_RISING	0x1
diff --git a/include/asm-blackfin/mach-bf533/dma.h b/include/asm-blackfin/mach-bf533/dma.h
index bd9d5e94307..16c672c01d8 100644
--- a/include/asm-blackfin/mach-bf533/dma.h
+++ b/include/asm-blackfin/mach-bf533/dma.h
@@ -51,4 +51,7 @@
 #define CH_MEM_STREAM1_DEST     10	 /* TX */
 #define CH_MEM_STREAM1_SRC      11	 /* RX */
 
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *base_addr[];
+
 #endif
diff --git a/include/asm-blackfin/mach-bf537/dma.h b/include/asm-blackfin/mach-bf537/dma.h
index 7a964040870..021991984e6 100644
--- a/include/asm-blackfin/mach-bf537/dma.h
+++ b/include/asm-blackfin/mach-bf537/dma.h
@@ -52,4 +52,7 @@
 #define CH_MEM_STREAM1_DEST	14	 /* TX */
 #define CH_MEM_STREAM1_SRC 	15	 /* RX */
 
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *base_addr[];
+
 #endif
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index ddc150e6fb0..aca1d4ba145 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -47,6 +47,8 @@
 			    SPORT external receive and transmit clocks. */
 #define ANOMALY_05000272 /* Certain data cache write through modes fail for
 			    VDDint <=0.9V */
+#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
+			    not restored */
 #define ANOMALY_05000310 /* False Hardware Errors Caused by Fetches at the
 			    Boundary of Reserved Memory */
 #define ANOMALY_05000312 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and
diff --git a/include/asm-blackfin/mach-bf548/bf548.h b/include/asm-blackfin/mach-bf548/bf548.h
index 0b211020443..163c79e3d23 100644
--- a/include/asm-blackfin/mach-bf548/bf548.h
+++ b/include/asm-blackfin/mach-bf548/bf548.h
@@ -30,6 +30,8 @@
 #ifndef __MACH_BF548_H__
 #define __MACH_BF548_H__
 
+#define SUPPORTED_REVID 0
+
 /* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */
 
 #define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE)	/* SPI_STAT */
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 8f5d9c4d8d5..2f4afc90db1 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -1,34 +1,35 @@
 #include <linux/serial.h>
 #include <asm/dma.h>
 
-#define NR_PORTS		2
+#define NR_PORTS		4
 
-#define OFFSET_THR              0x00	/* Transmit Holding register            */
-#define OFFSET_RBR              0x00	/* Receive Buffer register              */
 #define OFFSET_DLL              0x00	/* Divisor Latch (Low-Byte)             */
-#define OFFSET_IER              0x04	/* Interrupt Enable Register            */
 #define OFFSET_DLH              0x04	/* Divisor Latch (High-Byte)            */
-#define OFFSET_IIR              0x08	/* Interrupt Identification Register    */
+#define OFFSET_GCTL             0x08	/* Global Control Register              */
 #define OFFSET_LCR              0x0C	/* Line Control Register                */
 #define OFFSET_MCR              0x10	/* Modem Control Register               */
 #define OFFSET_LSR              0x14	/* Line Status Register                 */
 #define OFFSET_MSR              0x18	/* Modem Status Register                */
 #define OFFSET_SCR              0x1C	/* SCR Scratch Register                 */
-#define OFFSET_GCTL             0x24	/* Global Control Register              */
+#define OFFSET_IER_SET          0x20	/* Set Interrupt Enable Register        */
+#define OFFSET_IER_CLEAR        0x24	/* Clear Interrupt Enable Register      */
+#define OFFSET_THR              0x28	/* Transmit Holding register            */
+#define OFFSET_RBR              0x2C	/* Receive Buffer register              */
 
 #define UART_GET_CHAR(uart)     bfin_read16(((uart)->port.membase + OFFSET_RBR))
 #define UART_GET_DLL(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLL))
-#define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER))
 #define UART_GET_DLH(uart)	bfin_read16(((uart)->port.membase + OFFSET_DLH))
-#define UART_GET_IIR(uart)      bfin_read16(((uart)->port.membase + OFFSET_IIR))
+#define UART_GET_IER(uart)      bfin_read16(((uart)->port.membase + OFFSET_IER_SET))
 #define UART_GET_LCR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LCR))
 #define UART_GET_LSR(uart)      bfin_read16(((uart)->port.membase + OFFSET_LSR))
 #define UART_GET_GCTL(uart)     bfin_read16(((uart)->port.membase + OFFSET_GCTL))
 
 #define UART_PUT_CHAR(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_THR),v)
 #define UART_PUT_DLL(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
-#define UART_PUT_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER),v)
+#define UART_SET_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER_SET),v)
+#define UART_CLEAR_IER(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_IER_CLEAR),v)
 #define UART_PUT_DLH(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
+#define UART_PUT_LSR(uart,v)	bfin_write16(((uart)->port.membase + OFFSET_LSR),v)
 #define UART_PUT_LCR(uart,v)    bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
 #define UART_PUT_GCTL(uart,v)   bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
 
@@ -112,9 +113,29 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	CH_UART1_TX,
 	CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
-	CONFIG_UART1_CTS_PIN,
-	CONFIG_UART1_RTS_PIN,
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	{
+	0xFFC02100,
+	IRQ_UART2_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	CH_UART2_TX,
+	CH_UART2_RX,
+#endif
+#ifdef CONFIG_BFIN_UART2_CTSRTS
+	CONFIG_UART2_CTS_PIN,
+	CONFIG_UART2_RTS_PIN,
+#endif
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	{
+	0xFFC03100,
+	IRQ_UART3_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+	CH_UART3_TX,
+	CH_UART3_RX,
 #endif
 	},
 #endif
@@ -124,15 +145,40 @@ int nr_ports = ARRAY_SIZE(bfin_serial_resource);
 
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 {
-	unsigned short val;
-	val = bfin_read16(BFIN_PORT_MUX);
-	val &= ~(PFDE | PFTE);
-	bfin_write16(BFIN_PORT_MUX, val);
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	/* Enable UART0 RX and TX on pin 7 & 8 of PORT E */
+	bfin_write_PORTE_FER(0x180 | bfin_read_PORTE_FER());
+	bfin_write_PORTE_MUX(0x3C000 | bfin_read_PORTE_MUX());
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	/* Enable UART1 RX and TX on pin 0 & 1 of PORT H */
+	bfin_write_PORTH_FER(0x3 | bfin_read_PORTH_FER());
+	bfin_write_PORTH_MUX(~0xF & bfin_read_PORTH_MUX());
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	/* Enable UART1 RTS and CTS on pin 9 & 10 of PORT E */
+	bfin_write_PORTE_FER(0x600 | bfin_read_PORTE_FER());
+	bfin_write_PORTE_MUX(~0x3C0000 & bfin_read_PORTE_MUX());
+#endif
+#endif
 
-	val = bfin_read16(PORTF_FER);
-	val |= 0xF;
-	bfin_write16(PORTF_FER, val);
+#ifdef CONFIG_SERIAL_BFIN_UART2
+	/* Enable UART2 RX and TX on pin 4 & 5 of PORT B */
+	bfin_write_PORTB_FER(0x30 | bfin_read_PORTB_FER());
+	bfin_write_PORTB_MUX(~0xF00 & bfin_read_PORTB_MUX());
+#endif
 
+#ifdef CONFIG_SERIAL_BFIN_UART3
+	/* Enable UART3 RX and TX on pin 6 & 7 of PORT B */
+	bfin_write_PORTB_FER(0xC0 | bfin_read_PORTB_FER());
+	bfin_write_PORTB_MUX(~0xF000 | bfin_read_PORTB_MUX());
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+	/* Enable UART3 RTS and CTS on pin 2 & 3 of PORT B */
+	bfin_write_PORTB_FER(0xC | bfin_read_PORTB_FER());
+	bfin_write_PORTB_MUX(~0xF0 | bfin_read_PORTB_MUX());
+#endif
+#endif
+	SSYNC();
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	if (uart->cts_pin >= 0) {
 		gpio_request(uart->cts_pin, NULL);
diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/include/asm-blackfin/mach-bf548/blackfin.h
index 094c41a6319..791218fe7d9 100644
--- a/include/asm-blackfin/mach-bf548/blackfin.h
+++ b/include/asm-blackfin/mach-bf548/blackfin.h
@@ -34,24 +34,26 @@
 
 #define BF548_FAMILY
 
+#include "bf548.h"
+#include "mem_map.h"
+#include "anomaly.h"
+
 #ifdef CONFIG_BF542
-#include "bf542.h"
+#include "defBF542.h"
+#endif
 
 #ifdef CONFIG_BF544
-#include "bf544.h"
+#include "defBF544.h"
 #endif
 
 #ifdef CONFIG_BF548
-#include "bf548.h"
+#include "defBF548.h"
 #endif
 
 #ifdef CONFIG_BF549
-#include "bf549.h"
+#include "defBF549.h"
 #endif
 
-#include "mem_map.h"
-#include "anomaly.h"
-
 #if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
 #ifdef CONFIG_BF542
 #include "cdefBF542.h"
diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
index 6bbcefeb362..b1338000e27 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
@@ -31,7 +31,7 @@
 #ifndef _CDEF_BF54X_H
 #define _CDEF_BF54X_H
 
-#include <defBF54x_base.h>
+#include "defBF54x_base.h"
 
 /* ************************************************************** */
 /* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF54x    */
@@ -70,12 +70,18 @@
 #define bfin_write_SIC_IMASK1(val)	bfin_write32(SIC_IMASK1, val)
 #define bfin_read_SIC_IMASK2()		bfin_read32(SIC_IMASK2)
 #define bfin_write_SIC_IMASK2(val)	bfin_write32(SIC_IMASK2, val)
+#define bfin_read_SIC_IMASK(x)		bfin_read32(SIC_IMASK0 + (x << 2))
+#define bfin_write_SIC_IMASK(x, val)	bfin_write32((SIC_IMASK0 + (x << 2)), val)
+
 #define bfin_read_SIC_ISR0()		bfin_read32(SIC_ISR0)
 #define bfin_write_SIC_ISR0(val)	bfin_write32(SIC_ISR0, val)
 #define bfin_read_SIC_ISR1()		bfin_read32(SIC_ISR1)
 #define bfin_write_SIC_ISR1(val)	bfin_write32(SIC_ISR1, val)
 #define bfin_read_SIC_ISR2()		bfin_read32(SIC_ISR2)
 #define bfin_write_SIC_ISR2(val)	bfin_write32(SIC_ISR2, val)
+#define bfin_read_SIC_ISR(x)		bfin_read32(SIC_ISR0 + (x << 2))
+#define bfin_write_SIC_ISR(x, val)	bfin_write32((SIC_ISR0 + (x << 2)), val)
+
 #define bfin_read_SIC_IWR0()		bfin_read32(SIC_IWR0)
 #define bfin_write_SIC_IWR0(val)	bfin_write32(SIC_IWR0, val)
 #define bfin_read_SIC_IWR1()		bfin_read32(SIC_IWR1)
@@ -710,21 +716,21 @@
 #define bfin_read_MDMA_D0_NEXT_DESC_PTR() 	bfin_read32(MDMA_D0_NEXT_DESC_PTR)
 #define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_D0_NEXT_DESC_PTR)
 #define bfin_read_MDMA_D0_START_ADDR() 		bfin_read32(MDMA_D0_START_ADDR)
-#define bfin_write_MDMA_D0_START_ADDR(val) 	bfin_write32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val) 	bfin_write32(MDMA_D0_START_ADDR, val)
 #define bfin_read_MDMA_D0_CONFIG()		bfin_read16(MDMA_D0_CONFIG)
 #define bfin_write_MDMA_D0_CONFIG(val)		bfin_write16(MDMA_D0_CONFIG, val)
 #define bfin_read_MDMA_D0_X_COUNT()		bfin_read16(MDMA_D0_X_COUNT)
 #define bfin_write_MDMA_D0_X_COUNT(val)		bfin_write16(MDMA_D0_X_COUNT, val)
 #define bfin_read_MDMA_D0_X_MODIFY()		bfin_read16(MDMA_D0_X_MODIFY)
-#define bfin_write_MDMA_D0_X_MODIFY(val) 	bfin_write16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val) 	bfin_write16(MDMA_D0_X_MODIFY, val)
 #define bfin_read_MDMA_D0_Y_COUNT()		bfin_read16(MDMA_D0_Y_COUNT)
 #define bfin_write_MDMA_D0_Y_COUNT(val)		bfin_write16(MDMA_D0_Y_COUNT, val)
 #define bfin_read_MDMA_D0_Y_MODIFY()		bfin_read16(MDMA_D0_Y_MODIFY)
-#define bfin_write_MDMA_D0_Y_MODIFY(val) 	bfin_write16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val) 	bfin_write16(MDMA_D0_Y_MODIFY, val)
 #define bfin_read_MDMA_D0_CURR_DESC_PTR() 	bfin_read32(MDMA_D0_CURR_DESC_PTR)
-#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) 	bfin_write32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) 	bfin_write32(MDMA_D0_CURR_DESC_PTR, val)
 #define bfin_read_MDMA_D0_CURR_ADDR() 		bfin_read32(MDMA_D0_CURR_ADDR)
-#define bfin_write_MDMA_D0_CURR_ADDR(val) 	bfin_write32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val) 	bfin_write32(MDMA_D0_CURR_ADDR, val)
 #define bfin_read_MDMA_D0_IRQ_STATUS()		bfin_read16(MDMA_D0_IRQ_STATUS)
 #define bfin_write_MDMA_D0_IRQ_STATUS(val)	bfin_write16(MDMA_D0_IRQ_STATUS, val)
 #define bfin_read_MDMA_D0_PERIPHERAL_MAP()	bfin_read16(MDMA_D0_PERIPHERAL_MAP)
@@ -734,23 +740,23 @@
 #define bfin_read_MDMA_D0_CURR_Y_COUNT()	bfin_read16(MDMA_D0_CURR_Y_COUNT)
 #define bfin_write_MDMA_D0_CURR_Y_COUNT(val)	bfin_write16(MDMA_D0_CURR_Y_COUNT, val)
 #define bfin_read_MDMA_S0_NEXT_DESC_PTR() 	bfin_read32(MDMA_S0_NEXT_DESC_PTR)
-#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_S0_NEXT_DESC_PTR, val)
 #define bfin_read_MDMA_S0_START_ADDR() 		bfin_read32(MDMA_S0_START_ADDR)
-#define bfin_write_MDMA_S0_START_ADDR(val) 	bfin_write32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val) 	bfin_write32(MDMA_S0_START_ADDR, val)
 #define bfin_read_MDMA_S0_CONFIG()		bfin_read16(MDMA_S0_CONFIG)
 #define bfin_write_MDMA_S0_CONFIG(val)		bfin_write16(MDMA_S0_CONFIG, val)
 #define bfin_read_MDMA_S0_X_COUNT()		bfin_read16(MDMA_S0_X_COUNT)
 #define bfin_write_MDMA_S0_X_COUNT(val)		bfin_write16(MDMA_S0_X_COUNT, val)
 #define bfin_read_MDMA_S0_X_MODIFY()		bfin_read16(MDMA_S0_X_MODIFY)
-#define bfin_write_MDMA_S0_X_MODIFY(val) 	bfin_write16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val) 	bfin_write16(MDMA_S0_X_MODIFY, val)
 #define bfin_read_MDMA_S0_Y_COUNT()		bfin_read16(MDMA_S0_Y_COUNT)
 #define bfin_write_MDMA_S0_Y_COUNT(val)		bfin_write16(MDMA_S0_Y_COUNT, val)
 #define bfin_read_MDMA_S0_Y_MODIFY()		bfin_read16(MDMA_S0_Y_MODIFY)
-#define bfin_write_MDMA_S0_Y_MODIFY(val) 	bfin_write16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val) 	bfin_write16(MDMA_S0_Y_MODIFY, val)
 #define bfin_read_MDMA_S0_CURR_DESC_PTR() 	bfin_read32(MDMA_S0_CURR_DESC_PTR)
-#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) 	bfin_write32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) 	bfin_write32(MDMA_S0_CURR_DESC_PTR, val)
 #define bfin_read_MDMA_S0_CURR_ADDR() 		bfin_read32(MDMA_S0_CURR_ADDR)
-#define bfin_write_MDMA_S0_CURR_ADDR(val) 	bfin_write32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val) 	bfin_write32(MDMA_S0_CURR_ADDR, val)
 #define bfin_read_MDMA_S0_IRQ_STATUS()		bfin_read16(MDMA_S0_IRQ_STATUS)
 #define bfin_write_MDMA_S0_IRQ_STATUS(val)	bfin_write16(MDMA_S0_IRQ_STATUS, val)
 #define bfin_read_MDMA_S0_PERIPHERAL_MAP()	bfin_read16(MDMA_S0_PERIPHERAL_MAP)
@@ -763,9 +769,9 @@
 /* MDMA Stream 1 Registers */
 
 #define bfin_read_MDMA_D1_NEXT_DESC_PTR() 	bfin_read32(MDMA_D1_NEXT_DESC_PTR)
-#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_D1_NEXT_DESC_PTR, val)
 #define bfin_read_MDMA_D1_START_ADDR() 		bfin_read32(MDMA_D1_START_ADDR)
-#define bfin_write_MDMA_D1_START_ADDR(val) 	bfin_write32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val) 	bfin_write32(MDMA_D1_START_ADDR, val)
 #define bfin_read_MDMA_D1_CONFIG()		bfin_read16(MDMA_D1_CONFIG)
 #define bfin_write_MDMA_D1_CONFIG(val)		bfin_write16(MDMA_D1_CONFIG, val)
 #define bfin_read_MDMA_D1_X_COUNT()		bfin_read16(MDMA_D1_X_COUNT)
@@ -777,9 +783,9 @@
 #define bfin_read_MDMA_D1_Y_MODIFY()		bfin_read16(MDMA_D1_Y_MODIFY)
 #define bfin_write_MDMA_D1_Y_MODIFY(val) 	bfin_write16(MDMA_D1_Y_MODIFY)
 #define bfin_read_MDMA_D1_CURR_DESC_PTR() 	bfin_read32(MDMA_D1_CURR_DESC_PTR)
-#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) 	bfin_write32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) 	bfin_write32(MDMA_D1_CURR_DESC_PTR, val)
 #define bfin_read_MDMA_D1_CURR_ADDR() 		bfin_read32(MDMA_D1_CURR_ADDR)
-#define bfin_write_MDMA_D1_CURR_ADDR(val) 	bfin_write32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val) 	bfin_write32(MDMA_D1_CURR_ADDR, val)
 #define bfin_read_MDMA_D1_IRQ_STATUS()		bfin_read16(MDMA_D1_IRQ_STATUS)
 #define bfin_write_MDMA_D1_IRQ_STATUS(val)	bfin_write16(MDMA_D1_IRQ_STATUS, val)
 #define bfin_read_MDMA_D1_PERIPHERAL_MAP()	bfin_read16(MDMA_D1_PERIPHERAL_MAP)
@@ -789,9 +795,9 @@
 #define bfin_read_MDMA_D1_CURR_Y_COUNT()	bfin_read16(MDMA_D1_CURR_Y_COUNT)
 #define bfin_write_MDMA_D1_CURR_Y_COUNT(val)	bfin_write16(MDMA_D1_CURR_Y_COUNT, val)
 #define bfin_read_MDMA_S1_NEXT_DESC_PTR() 	bfin_read32(MDMA_S1_NEXT_DESC_PTR)
-#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) 	bfin_write32(MDMA_S1_NEXT_DESC_PTR, val)
 #define bfin_read_MDMA_S1_START_ADDR() 		bfin_read32(MDMA_S1_START_ADDR)
-#define bfin_write_MDMA_S1_START_ADDR(val) 	bfin_write32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val) 	bfin_write32(MDMA_S1_START_ADDR, val)
 #define bfin_read_MDMA_S1_CONFIG()		bfin_read16(MDMA_S1_CONFIG)
 #define bfin_write_MDMA_S1_CONFIG(val)		bfin_write16(MDMA_S1_CONFIG, val)
 #define bfin_read_MDMA_S1_X_COUNT()		bfin_read16(MDMA_S1_X_COUNT)
@@ -803,9 +809,9 @@
 #define bfin_read_MDMA_S1_Y_MODIFY()		bfin_read16(MDMA_S1_Y_MODIFY)
 #define bfin_write_MDMA_S1_Y_MODIFY(val) 	bfin_write16(MDMA_S1_Y_MODIFY)
 #define bfin_read_MDMA_S1_CURR_DESC_PTR() 	bfin_read32(MDMA_S1_CURR_DESC_PTR)
-#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) 	bfin_write32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) 	bfin_write32(MDMA_S1_CURR_DESC_PTR, val)
 #define bfin_read_MDMA_S1_CURR_ADDR() 		bfin_read32(MDMA_S1_CURR_ADDR)
-#define bfin_write_MDMA_S1_CURR_ADDR(val) 	bfin_write32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val) 	bfin_write32(MDMA_S1_CURR_ADDR, val)
 #define bfin_read_MDMA_S1_IRQ_STATUS()		bfin_read16(MDMA_S1_IRQ_STATUS)
 #define bfin_write_MDMA_S1_IRQ_STATUS(val)	bfin_write16(MDMA_S1_IRQ_STATUS, val)
 #define bfin_read_MDMA_S1_PERIPHERAL_MAP()	bfin_read16(MDMA_S1_PERIPHERAL_MAP)
diff --git a/include/asm-blackfin/mach-bf548/defBF542.h b/include/asm-blackfin/mach-bf548/defBF542.h
index ac968fca5cc..32d07130200 100644
--- a/include/asm-blackfin/mach-bf548/defBF542.h
+++ b/include/asm-blackfin/mach-bf548/defBF542.h
@@ -362,7 +362,6 @@
 /* Bit masks for KPAD_CTL */
 
 #define                   KPAD_EN  0x1        /* Keypad Enable */
-#define                  nKPAD_EN  0x0       
 #define              KPAD_IRQMODE  0x6        /* Key Press Interrupt Enable */
 #define                KPAD_ROWEN  0x1c00     /* Row Enable Width */
 #define                KPAD_COLEN  0xe000     /* Column Enable Width */
@@ -384,29 +383,21 @@
 /* Bit masks for KPAD_STAT */
 
 #define                  KPAD_IRQ  0x1        /* Keypad Interrupt Status */
-#define                 nKPAD_IRQ  0x0       
 #define              KPAD_MROWCOL  0x6        /* Multiple Row/Column Keypress Status */
 #define              KPAD_PRESSED  0x8        /* Key press current status */
-#define             nKPAD_PRESSED  0x0       
 
 /* Bit masks for KPAD_SOFTEVAL */
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
-#define          nKPAD_SOFTEVAL_E  0x0       
 
 /* Bit masks for SDH_COMMAND */
 
 #define                   CMD_IDX  0x3f       /* Command Index */
 #define                   CMD_RSP  0x40       /* Response */
-#define                  nCMD_RSP  0x0       
 #define                 CMD_L_RSP  0x80       /* Long Response */
-#define                nCMD_L_RSP  0x0       
 #define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                nCMD_INT_E  0x0       
 #define                CMD_PEND_E  0x200      /* Command Pending */
-#define               nCMD_PEND_E  0x0       
 #define                     CMD_E  0x400      /* Command Enable */
-#define                    nCMD_E  0x0       
 
 /* Bit masks for SDH_PWR_CTL */
 
@@ -415,21 +406,15 @@
 #define                       TBD  0x3c       /* TBD */
 #endif
 #define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                nSD_CMD_OD  0x0       
 #define                   ROD_CTL  0x80       /* Rod Control */
-#define                  nROD_CTL  0x0       
 
 /* Bit masks for SDH_CLK_CTL */
 
 #define                    CLKDIV  0xff       /* MC_CLK Divisor */
 #define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                    nCLK_E  0x0       
 #define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define                 nPWR_SV_E  0x0       
 #define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define            nCLKDIV_BYPASS  0x0       
 #define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-#define                 nWIDE_BUS  0x0       
 
 /* Bit masks for SDH_RESP_CMD */
 
@@ -438,133 +423,74 @@
 /* Bit masks for SDH_DATA_CTL */
 
 #define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                    nDTX_E  0x0       
 #define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  nDTX_DIR  0x0       
 #define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 nDTX_MODE  0x0       
 #define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define                nDTX_DMA_E  0x0       
 #define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
 
 /* Bit masks for SDH_STATUS */
 
 #define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define             nCMD_CRC_FAIL  0x0       
 #define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define             nDAT_CRC_FAIL  0x0       
 #define               CMD_TIMEOUT  0x4        /* CMD Time Out */
-#define              nCMD_TIMEOUT  0x0       
 #define               DAT_TIMEOUT  0x8        /* Data Time Out */
-#define              nDAT_TIMEOUT  0x0       
 #define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define              nTX_UNDERRUN  0x0       
 #define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define               nRX_OVERRUN  0x0       
 #define              CMD_RESP_END  0x40       /* CMD Response End */
-#define             nCMD_RESP_END  0x0       
 #define                  CMD_SENT  0x80       /* CMD Sent */
-#define                 nCMD_SENT  0x0       
 #define                   DAT_END  0x100      /* Data End */
-#define                  nDAT_END  0x0       
 #define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define            nSTART_BIT_ERR  0x0       
 #define               DAT_BLK_END  0x400      /* Data Block End */
-#define              nDAT_BLK_END  0x0       
 #define                   CMD_ACT  0x800      /* CMD Active */
-#define                  nCMD_ACT  0x0       
 #define                    TX_ACT  0x1000     /* Transmit Active */
-#define                   nTX_ACT  0x0       
 #define                    RX_ACT  0x2000     /* Receive Active */
-#define                   nRX_ACT  0x0       
 #define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define             nTX_FIFO_STAT  0x0       
 #define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define             nRX_FIFO_STAT  0x0       
 #define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define             nTX_FIFO_FULL  0x0       
 #define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define             nRX_FIFO_FULL  0x0       
 #define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define             nTX_FIFO_ZERO  0x0       
 #define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define              nRX_DAT_ZERO  0x0       
 #define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               nTX_DAT_RDY  0x0       
 #define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-#define              nRX_FIFO_RDY  0x0       
 
 /* Bit masks for SDH_STATUS_CLR */
 
 #define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define        nCMD_CRC_FAIL_STAT  0x0       
 #define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define        nDAT_CRC_FAIL_STAT  0x0       
 #define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define         nCMD_TIMEOUT_STAT  0x0       
 #define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define         nDAT_TIMEOUT_STAT  0x0       
 #define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define         nTX_UNDERRUN_STAT  0x0       
 #define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define          nRX_OVERRUN_STAT  0x0       
 #define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define        nCMD_RESP_END_STAT  0x0       
 #define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define            nCMD_SENT_STAT  0x0       
 #define              DAT_END_STAT  0x100      /* Data End Status */
-#define             nDAT_END_STAT  0x0       
 #define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define       nSTART_BIT_ERR_STAT  0x0       
 #define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-#define         nDAT_BLK_END_STAT  0x0       
 
 /* Bit masks for SDH_MASK0 */
 
 #define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define        nCMD_CRC_FAIL_MASK  0x0       
 #define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define        nDAT_CRC_FAIL_MASK  0x0       
 #define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define         nCMD_TIMEOUT_MASK  0x0       
 #define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define         nDAT_TIMEOUT_MASK  0x0       
 #define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define         nTX_UNDERRUN_MASK  0x0       
 #define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define          nRX_OVERRUN_MASK  0x0       
 #define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define        nCMD_RESP_END_MASK  0x0       
 #define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define            nCMD_SENT_MASK  0x0       
 #define              DAT_END_MASK  0x100      /* Data End Mask */
-#define             nDAT_END_MASK  0x0       
 #define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define       nSTART_BIT_ERR_MASK  0x0       
 #define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define         nDAT_BLK_END_MASK  0x0       
 #define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define             nCMD_ACT_MASK  0x0       
 #define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define              nTX_ACT_MASK  0x0       
 #define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define              nRX_ACT_MASK  0x0       
 #define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define        nTX_FIFO_STAT_MASK  0x0       
 #define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define        nRX_FIFO_STAT_MASK  0x0       
 #define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define        nTX_FIFO_FULL_MASK  0x0       
 #define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define        nRX_FIFO_FULL_MASK  0x0       
 #define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define        nTX_FIFO_ZERO_MASK  0x0       
 #define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define         nRX_DAT_ZERO_MASK  0x0       
 #define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          nTX_DAT_RDY_MASK  0x0       
 #define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-#define         nRX_FIFO_RDY_MASK  0x0       
 
 /* Bit masks for SDH_FIFO_CNT */
 
@@ -573,73 +499,47 @@
 /* Bit masks for SDH_E_STATUS */
 
 #define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define             nSDIO_INT_DET  0x0       
 #define               SD_CARD_DET  0x10       /* SD Card Detect */
-#define              nSD_CARD_DET  0x0       
 
 /* Bit masks for SDH_E_MASK */
 
 #define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                 nSDIO_MSK  0x0       
 #define                   SCD_MSK  0x40       /* Mask Card Detect */
-#define                  nSCD_MSK  0x0       
 
 /* Bit masks for SDH_CFG */
 
 #define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                  nCLKS_EN  0x0       
 #define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                     nSD4E  0x0       
 #define                       MWE  0x8        /* Moving Window Enable */
-#define                      nMWE  0x0       
 #define                    SD_RST  0x10       /* SDMMC Reset */
-#define                   nSD_RST  0x0       
 #define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                nPUP_SDDAT  0x0       
 #define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define               nPUP_SDDAT3  0x0       
 #define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-#define                nPD_SDDAT3  0x0       
 
 /* Bit masks for SDH_RD_WAIT_EN */
 
 #define                       RWR  0x1        /* Read Wait Request */
-#define                      nRWR  0x0       
 
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */
-#define                nPIO_START  0x0       
 #define               MULTI_START  0x2        /* Start Multi-DMA Op */
-#define              nMULTI_START  0x0       
 #define               ULTRA_START  0x4        /* Start Ultra-DMA Op */
-#define              nULTRA_START  0x0       
 #define                  XFER_DIR  0x8        /* Transfer Direction */
-#define                 nXFER_DIR  0x0       
 #define                  IORDY_EN  0x10       /* IORDY Enable */
-#define                 nIORDY_EN  0x0       
 #define                FIFO_FLUSH  0x20       /* Flush FIFOs */
-#define               nFIFO_FLUSH  0x0       
 #define                  SOFT_RST  0x40       /* Soft Reset */
-#define                 nSOFT_RST  0x0       
 #define                   DEV_RST  0x80       /* Device Reset */
-#define                  nDEV_RST  0x0       
 #define                TFRCNT_RST  0x100      /* Trans Count Reset */
-#define               nTFRCNT_RST  0x0       
 #define               END_ON_TERM  0x200      /* End/Terminate Select */
-#define              nEND_ON_TERM  0x0       
 #define               PIO_USE_DMA  0x400      /* PIO-DMA Enable */
-#define              nPIO_USE_DMA  0x0       
 #define          UDMAIN_FIFO_THRS  0xf000     /* Ultra DMA-IN FIFO Threshold */
 
 /* Bit masks for ATAPI_STATUS */
 
 #define               PIO_XFER_ON  0x1        /* PIO transfer in progress */
-#define              nPIO_XFER_ON  0x0       
 #define             MULTI_XFER_ON  0x2        /* Multi-word DMA transfer in progress */
-#define            nMULTI_XFER_ON  0x0       
 #define             ULTRA_XFER_ON  0x4        /* Ultra DMA transfer in progress */
-#define            nULTRA_XFER_ON  0x0       
 #define               ULTRA_IN_FL  0xf0       /* Ultra DMA Input FIFO Level */
 
 /* Bit masks for ATAPI_DEV_ADDR */
@@ -649,66 +549,39 @@
 /* Bit masks for ATAPI_INT_MASK */
 
 #define        ATAPI_DEV_INT_MASK  0x1        /* Device interrupt mask */
-#define       nATAPI_DEV_INT_MASK  0x0       
 #define             PIO_DONE_MASK  0x2        /* PIO transfer done interrupt mask */
-#define            nPIO_DONE_MASK  0x0       
 #define           MULTI_DONE_MASK  0x4        /* Multi-DMA transfer done interrupt mask */
-#define          nMULTI_DONE_MASK  0x0       
 #define          UDMAIN_DONE_MASK  0x8        /* Ultra-DMA in transfer done interrupt mask */
-#define         nUDMAIN_DONE_MASK  0x0       
 #define         UDMAOUT_DONE_MASK  0x10       /* Ultra-DMA out transfer done interrupt mask */
-#define        nUDMAOUT_DONE_MASK  0x0       
 #define       HOST_TERM_XFER_MASK  0x20       /* Host terminate current transfer interrupt mask */
-#define      nHOST_TERM_XFER_MASK  0x0       
 #define           MULTI_TERM_MASK  0x40       /* Device terminate Multi-DMA transfer interrupt mask */
-#define          nMULTI_TERM_MASK  0x0       
 #define          UDMAIN_TERM_MASK  0x80       /* Device terminate Ultra-DMA-in transfer interrupt mask */
-#define         nUDMAIN_TERM_MASK  0x0       
 #define         UDMAOUT_TERM_MASK  0x100      /* Device terminate Ultra-DMA-out transfer interrupt mask */
-#define        nUDMAOUT_TERM_MASK  0x0       
 
 /* Bit masks for ATAPI_INT_STATUS */
 
 #define             ATAPI_DEV_INT  0x1        /* Device interrupt status */
-#define            nATAPI_DEV_INT  0x0       
 #define              PIO_DONE_INT  0x2        /* PIO transfer done interrupt status */
-#define             nPIO_DONE_INT  0x0       
 #define            MULTI_DONE_INT  0x4        /* Multi-DMA transfer done interrupt status */
-#define           nMULTI_DONE_INT  0x0       
 #define           UDMAIN_DONE_INT  0x8        /* Ultra-DMA in transfer done interrupt status */
-#define          nUDMAIN_DONE_INT  0x0       
 #define          UDMAOUT_DONE_INT  0x10       /* Ultra-DMA out transfer done interrupt status */
-#define         nUDMAOUT_DONE_INT  0x0       
 #define        HOST_TERM_XFER_INT  0x20       /* Host terminate current transfer interrupt status */
-#define       nHOST_TERM_XFER_INT  0x0       
 #define            MULTI_TERM_INT  0x40       /* Device terminate Multi-DMA transfer interrupt status */
-#define           nMULTI_TERM_INT  0x0       
 #define           UDMAIN_TERM_INT  0x80       /* Device terminate Ultra-DMA-in transfer interrupt status */
-#define          nUDMAIN_TERM_INT  0x0       
 #define          UDMAOUT_TERM_INT  0x100      /* Device terminate Ultra-DMA-out transfer interrupt status */
-#define         nUDMAOUT_TERM_INT  0x0       
 
 /* Bit masks for ATAPI_LINE_STATUS */
 
 #define                ATAPI_INTR  0x1        /* Device interrupt to host line status */
-#define               nATAPI_INTR  0x0       
 #define                ATAPI_DASP  0x2        /* Device dasp to host line status */
-#define               nATAPI_DASP  0x0       
 #define                ATAPI_CS0N  0x4        /* ATAPI chip select 0 line status */
-#define               nATAPI_CS0N  0x0       
 #define                ATAPI_CS1N  0x8        /* ATAPI chip select 1 line status */
-#define               nATAPI_CS1N  0x0       
 #define                ATAPI_ADDR  0x70       /* ATAPI address line status */
 #define              ATAPI_DMAREQ  0x80       /* ATAPI DMA request line status */
-#define             nATAPI_DMAREQ  0x0       
 #define             ATAPI_DMAACKN  0x100      /* ATAPI DMA acknowledge line status */
-#define            nATAPI_DMAACKN  0x0       
 #define               ATAPI_DIOWN  0x200      /* ATAPI write line status */
-#define              nATAPI_DIOWN  0x0       
 #define               ATAPI_DIORN  0x400      /* ATAPI read line status */
-#define              nATAPI_DIORN  0x0       
 #define               ATAPI_IORDY  0x800      /* ATAPI IORDY line status */
-#define              nATAPI_IORDY  0x0       
 
 /* Bit masks for ATAPI_SM_STATE */
 
@@ -720,7 +593,6 @@
 /* Bit masks for ATAPI_TERMINATE */
 
 #define           ATAPI_HOST_TERM  0x1        /* Host terminationation */
-#define          nATAPI_HOST_TERM  0x0       
 
 /* Bit masks for ATAPI_REG_TIM_0 */
 
@@ -779,131 +651,77 @@
 /* Bit masks for USB_POWER */
 
 #define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
-#define          nENABLE_SUSPENDM  0x0       
 #define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
-#define             nSUSPEND_MODE  0x0       
 #define               RESUME_MODE  0x4        /* DMA Mode */
-#define              nRESUME_MODE  0x0       
 #define                     RESET  0x8        /* Reset indicator */
-#define                    nRESET  0x0       
 #define                   HS_MODE  0x10       /* High Speed mode indicator */
-#define                  nHS_MODE  0x0       
 #define                 HS_ENABLE  0x20       /* high Speed Enable */
-#define                nHS_ENABLE  0x0       
 #define                 SOFT_CONN  0x40       /* Soft connect */
-#define                nSOFT_CONN  0x0       
 #define                ISO_UPDATE  0x80       /* Isochronous update */
-#define               nISO_UPDATE  0x0       
 
 /* Bit masks for USB_INTRTX */
 
 #define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
-#define                   nEP0_TX  0x0       
 #define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
-#define                   nEP1_TX  0x0       
 #define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
-#define                   nEP2_TX  0x0       
 #define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
-#define                   nEP3_TX  0x0       
 #define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
-#define                   nEP4_TX  0x0       
 #define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
-#define                   nEP5_TX  0x0       
 #define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
-#define                   nEP6_TX  0x0       
 #define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
-#define                   nEP7_TX  0x0       
 
 /* Bit masks for USB_INTRRX */
 
 #define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
-#define                   nEP1_RX  0x0       
 #define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
-#define                   nEP2_RX  0x0       
 #define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
-#define                   nEP3_RX  0x0       
 #define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
-#define                   nEP4_RX  0x0       
 #define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
-#define                   nEP5_RX  0x0       
 #define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
-#define                   nEP6_RX  0x0       
 #define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
-#define                   nEP7_RX  0x0       
 
 /* Bit masks for USB_INTRTXE */
 
 #define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
-#define                 nEP0_TX_E  0x0       
 #define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
-#define                 nEP1_TX_E  0x0       
 #define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
-#define                 nEP2_TX_E  0x0       
 #define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
-#define                 nEP3_TX_E  0x0       
 #define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
-#define                 nEP4_TX_E  0x0       
 #define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
-#define                 nEP5_TX_E  0x0       
 #define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
-#define                 nEP6_TX_E  0x0       
 #define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
-#define                 nEP7_TX_E  0x0       
 
 /* Bit masks for USB_INTRRXE */
 
 #define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
-#define                 nEP1_RX_E  0x0       
 #define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
-#define                 nEP2_RX_E  0x0       
 #define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
-#define                 nEP3_RX_E  0x0       
 #define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
-#define                 nEP4_RX_E  0x0       
 #define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
-#define                 nEP5_RX_E  0x0       
 #define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
-#define                 nEP6_RX_E  0x0       
 #define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
-#define                 nEP7_RX_E  0x0       
 
 /* Bit masks for USB_INTRUSB */
 
 #define                 SUSPEND_B  0x1        /* Suspend indicator */
-#define                nSUSPEND_B  0x0       
 #define                  RESUME_B  0x2        /* Resume indicator */
-#define                 nRESUME_B  0x0       
 #define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
-#define         nRESET_OR_BABLE_B  0x0       
 #define                     SOF_B  0x8        /* Start of frame */
-#define                    nSOF_B  0x0       
 #define                    CONN_B  0x10       /* Connection indicator */
-#define                   nCONN_B  0x0       
 #define                  DISCON_B  0x20       /* Disconnect indicator */
-#define                 nDISCON_B  0x0       
 #define             SESSION_REQ_B  0x40       /* Session Request */
-#define            nSESSION_REQ_B  0x0       
 #define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
-#define             nVBUS_ERROR_B  0x0       
 
 /* Bit masks for USB_INTRUSBE */
 
 #define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
-#define               nSUSPEND_BE  0x0       
 #define                 RESUME_BE  0x2        /* Resume indicator int enable */
-#define                nRESUME_BE  0x0       
 #define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
-#define        nRESET_OR_BABLE_BE  0x0       
 #define                    SOF_BE  0x8        /* Start of frame int enable */
-#define                   nSOF_BE  0x0       
 #define                   CONN_BE  0x10       /* Connection indicator int enable */
-#define                  nCONN_BE  0x0       
 #define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
-#define                nDISCON_BE  0x0       
 #define            SESSION_REQ_BE  0x40       /* Session Request int enable */
-#define           nSESSION_REQ_BE  0x0       
 #define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
-#define            nVBUS_ERROR_BE  0x0       
 
 /* Bit masks for USB_FRAME */
 
@@ -916,117 +734,67 @@
 /* Bit masks for USB_GLOBAL_CTL */
 
 #define                GLOBAL_ENA  0x1        /* enables USB module */
-#define               nGLOBAL_ENA  0x0       
 #define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
-#define               nEP1_TX_ENA  0x0       
 #define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
-#define               nEP2_TX_ENA  0x0       
 #define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
-#define               nEP3_TX_ENA  0x0       
 #define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
-#define               nEP4_TX_ENA  0x0       
 #define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
-#define               nEP5_TX_ENA  0x0       
 #define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
-#define               nEP6_TX_ENA  0x0       
 #define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
-#define               nEP7_TX_ENA  0x0       
 #define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
-#define               nEP1_RX_ENA  0x0       
 #define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
-#define               nEP2_RX_ENA  0x0       
 #define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
-#define               nEP3_RX_ENA  0x0       
 #define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
-#define               nEP4_RX_ENA  0x0       
 #define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
-#define               nEP5_RX_ENA  0x0       
 #define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
-#define               nEP6_RX_ENA  0x0       
 #define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
-#define               nEP7_RX_ENA  0x0       
 
 /* Bit masks for USB_OTG_DEV_CTL */
 
 #define                   SESSION  0x1        /* session indicator */
-#define                  nSESSION  0x0       
 #define                  HOST_REQ  0x2        /* Host negotiation request */
-#define                 nHOST_REQ  0x0       
 #define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
-#define                nHOST_MODE  0x0       
 #define                     VBUS0  0x8        /* Vbus level indicator[0] */
-#define                    nVBUS0  0x0       
 #define                     VBUS1  0x10       /* Vbus level indicator[1] */
-#define                    nVBUS1  0x0       
 #define                     LSDEV  0x20       /* Low-speed indicator */
-#define                    nLSDEV  0x0       
 #define                     FSDEV  0x40       /* Full or High-speed indicator */
-#define                    nFSDEV  0x0       
 #define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
-#define                 nB_DEVICE  0x0       
 
 /* Bit masks for USB_OTG_VBUS_IRQ */
 
 #define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
-#define            nDRIVE_VBUS_ON  0x0       
 #define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
-#define           nDRIVE_VBUS_OFF  0x0       
 #define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
-#define          nCHRG_VBUS_START  0x0       
 #define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
-#define            nCHRG_VBUS_END  0x0       
 #define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
-#define       nDISCHRG_VBUS_START  0x0       
 #define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
-#define         nDISCHRG_VBUS_END  0x0       
 
 /* Bit masks for USB_OTG_VBUS_MASK */
 
 #define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
-#define        nDRIVE_VBUS_ON_ENA  0x0       
 #define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
-#define       nDRIVE_VBUS_OFF_ENA  0x0       
 #define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
-#define      nCHRG_VBUS_START_ENA  0x0       
 #define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
-#define        nCHRG_VBUS_END_ENA  0x0       
 #define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
-#define   nDISCHRG_VBUS_START_ENA  0x0       
 #define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
-#define     nDISCHRG_VBUS_END_ENA  0x0       
 
 /* Bit masks for USB_CSR0 */
 
 #define                  RXPKTRDY  0x1        /* data packet receive indicator */
-#define                 nRXPKTRDY  0x0       
 #define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
-#define                 nTXPKTRDY  0x0       
 #define                STALL_SENT  0x4        /* STALL handshake sent */
-#define               nSTALL_SENT  0x0       
 #define                   DATAEND  0x8        /* Data end indicator */
-#define                  nDATAEND  0x0       
 #define                  SETUPEND  0x10       /* Setup end */
-#define                 nSETUPEND  0x0       
 #define                 SENDSTALL  0x20       /* Send STALL handshake */
-#define                nSENDSTALL  0x0       
 #define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
-#define        nSERVICED_RXPKTRDY  0x0       
 #define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
-#define        nSERVICED_SETUPEND  0x0       
 #define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
-#define                nFLUSHFIFO  0x0       
 #define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
-#define         nSTALL_RECEIVED_H  0x0       
 #define                SETUPPKT_H  0x8        /* send Setup token host mode */
-#define               nSETUPPKT_H  0x0       
 #define                   ERROR_H  0x10       /* timeout error indicator host mode */
-#define                  nERROR_H  0x0       
 #define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
-#define                 nREQPKT_H  0x0       
 #define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
-#define              nSTATUSPKT_H  0x0       
 #define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
-#define            nNAK_TIMEOUT_H  0x0       
 
 /* Bit masks for USB_COUNT0 */
 
@@ -1047,37 +815,21 @@
 /* Bit masks for USB_TXCSR */
 
 #define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
-#define               nTXPKTRDY_T  0x0       
 #define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
-#define         nFIFO_NOT_EMPTY_T  0x0       
 #define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
-#define               nUNDERRUN_T  0x0       
 #define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
-#define              nFLUSHFIFO_T  0x0       
 #define              STALL_SEND_T  0x10       /* issue a Stall handshake */
-#define             nSTALL_SEND_T  0x0       
 #define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
-#define             nSTALL_SENT_T  0x0       
 #define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_T  0x0       
 #define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
-#define               nINCOMPTX_T  0x0       
 #define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_T  0x0       
 #define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
-#define       nFORCE_DATATOGGLE_T  0x0       
 #define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_T  0x0       
 #define                     ISO_T  0x4000     /* enable Isochronous transfers */
-#define                    nISO_T  0x0       
 #define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
-#define                nAUTOSET_T  0x0       
 #define                  ERROR_TH  0x4        /* error condition host mode */
-#define                 nERROR_TH  0x0       
 #define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_TH  0x0       
 #define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
-#define           nNAK_TIMEOUT_TH  0x0       
 
 /* Bit masks for USB_TXCOUNT */
 
@@ -1086,45 +838,25 @@
 /* Bit masks for USB_RXCSR */
 
 #define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
-#define               nRXPKTRDY_R  0x0       
 #define               FIFO_FULL_R  0x2        /* FIFO not empty */
-#define              nFIFO_FULL_R  0x0       
 #define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
-#define                nOVERRUN_R  0x0       
 #define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
-#define              nDATAERROR_R  0x0       
 #define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
-#define              nFLUSHFIFO_R  0x0       
 #define              STALL_SEND_R  0x20       /* issue a Stall handshake */
-#define             nSTALL_SEND_R  0x0       
 #define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
-#define             nSTALL_SENT_R  0x0       
 #define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_R  0x0       
 #define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
-#define               nINCOMPRX_R  0x0       
 #define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_R  0x0       
 #define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
-#define                nDISNYET_R  0x0       
 #define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_R  0x0       
 #define                     ISO_R  0x4000     /* enable Isochronous transfers */
-#define                    nISO_R  0x0       
 #define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
-#define              nAUTOCLEAR_R  0x0       
 #define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
-#define                 nERROR_RH  0x0       
 #define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
-#define                nREQPKT_RH  0x0       
 #define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_RH  0x0       
 #define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
-#define              nINCOMPRX_RH  0x0       
 #define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
-#define            nDMAREQMODE_RH  0x0       
 #define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
-#define               nAUTOREQ_RH  0x0       
 
 /* Bit masks for USB_RXCOUNT */
 
@@ -1151,35 +883,22 @@
 /* Bit masks for USB_DMA_INTERRUPT */
 
 #define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
-#define                 nDMA0_INT  0x0       
 #define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
-#define                 nDMA1_INT  0x0       
 #define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
-#define                 nDMA2_INT  0x0       
 #define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
-#define                 nDMA3_INT  0x0       
 #define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
-#define                 nDMA4_INT  0x0       
 #define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
-#define                 nDMA5_INT  0x0       
 #define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
-#define                 nDMA6_INT  0x0       
 #define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
-#define                 nDMA7_INT  0x0       
 
 /* Bit masks for USB_DMAxCONTROL */
 
 #define                   DMA_ENA  0x1        /* DMA enable */
-#define                  nDMA_ENA  0x0       
 #define                 DIRECTION  0x2        /* direction of DMA transfer */
-#define                nDIRECTION  0x0       
 #define                      MODE  0x4        /* DMA Bus error */
-#define                     nMODE  0x0       
 #define                   INT_ENA  0x8        /* Interrupt enable */
-#define                  nINT_ENA  0x0       
 #define                     EPNUM  0xf0       /* EP number */
 #define                  BUSERROR  0x100      /* DMA Bus error */
-#define                 nBUSERROR  0x0       
 
 /* Bit masks for USB_DMAxADDRHIGH */
 
diff --git a/include/asm-blackfin/mach-bf548/defBF544.h b/include/asm-blackfin/mach-bf548/defBF544.h
index 8fc77ea12aa..dd955dcd39b 100644
--- a/include/asm-blackfin/mach-bf548/defBF544.h
+++ b/include/asm-blackfin/mach-bf548/defBF544.h
@@ -538,21 +538,13 @@
 /* Bit masks for PIXC_CTL */
 
 #define                   PIXC_EN  0x1        /* Pixel Compositor Enable */
-#define                  nPIXC_EN  0x0       
 #define                  OVR_A_EN  0x2        /* Overlay A Enable */
-#define                 nOVR_A_EN  0x0       
 #define                  OVR_B_EN  0x4        /* Overlay B Enable */
-#define                 nOVR_B_EN  0x0       
 #define                  IMG_FORM  0x8        /* Image Data Format */
-#define                 nIMG_FORM  0x0       
 #define                  OVR_FORM  0x10       /* Overlay Data Format */
-#define                 nOVR_FORM  0x0       
 #define                  OUT_FORM  0x20       /* Output Data Format */
-#define                 nOUT_FORM  0x0       
 #define                   UDS_MOD  0x40       /* Resampling Mode */
-#define                  nUDS_MOD  0x0       
 #define                     TC_EN  0x80       /* Transparent Color Enable */
-#define                    nTC_EN  0x0       
 #define                  IMG_STAT  0x300      /* Image FIFO Status */
 #define                  OVR_STAT  0xc00      /* Overlay FIFO Status */
 #define                    WM_LVL  0x3000     /* FIFO Watermark Level */
@@ -600,13 +592,9 @@
 /* Bit masks for PIXC_INTRSTAT */
 
 #define                OVR_INT_EN  0x1        /* Interrupt at End of Last Valid Overlay */
-#define               nOVR_INT_EN  0x0       
 #define                FRM_INT_EN  0x2        /* Interrupt at End of Frame */
-#define               nFRM_INT_EN  0x0       
 #define              OVR_INT_STAT  0x4        /* Overlay Interrupt Status */
-#define             nOVR_INT_STAT  0x0       
 #define              FRM_INT_STAT  0x8        /* Frame Interrupt Status */
-#define             nFRM_INT_STAT  0x0       
 
 /* Bit masks for PIXC_RYCON */
 
@@ -614,7 +602,6 @@
 #define                       A12  0xffc00    /* A12 in the Coefficient Matrix */
 #define                       A13  0x3ff00000 /* A13 in the Coefficient Matrix */
 #define                  RY_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nRY_MULT4  0x0       
 
 /* Bit masks for PIXC_GUCON */
 
@@ -622,7 +609,6 @@
 #define                       A22  0xffc00    /* A22 in the Coefficient Matrix */
 #define                       A23  0x3ff00000 /* A23 in the Coefficient Matrix */
 #define                  GU_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nGU_MULT4  0x0       
 
 /* Bit masks for PIXC_BVCON */
 
@@ -630,7 +616,6 @@
 #define                       A32  0xffc00    /* A32 in the Coefficient Matrix */
 #define                       A33  0x3ff00000 /* A33 in the Coefficient Matrix */
 #define                  BV_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nBV_MULT4  0x0       
 
 /* Bit masks for PIXC_CCBIAS */
 
@@ -647,48 +632,28 @@
 /* Bit masks for HOST_CONTROL */
 
 #define                   HOST_EN  0x1        /* Host Enable */
-#define                  nHOST_EN  0x0       
 #define                  HOST_END  0x2        /* Host Endianess */
-#define                 nHOST_END  0x0       
 #define                 DATA_SIZE  0x4        /* Data Size */
-#define                nDATA_SIZE  0x0       
 #define                  HOST_RST  0x8        /* Host Reset */
-#define                 nHOST_RST  0x0       
 #define                  HRDY_OVR  0x20       /* Host Ready Override */
-#define                 nHRDY_OVR  0x0       
 #define                  INT_MODE  0x40       /* Interrupt Mode */
-#define                 nINT_MODE  0x0       
 #define                     BT_EN  0x80       /* Bus Timeout Enable */
-#define                    nBT_EN  0x0       
 #define                       EHW  0x100      /* Enable Host Write */
-#define                      nEHW  0x0       
 #define                       EHR  0x200      /* Enable Host Read */
-#define                      nEHR  0x0       
 #define                       BDR  0x400      /* Burst DMA Requests */
-#define                      nBDR  0x0       
 
 /* Bit masks for HOST_STATUS */
 
 #define                     READY  0x1        /* DMA Ready */
-#define                    nREADY  0x0       
 #define                  FIFOFULL  0x2        /* FIFO Full */
-#define                 nFIFOFULL  0x0       
 #define                 FIFOEMPTY  0x4        /* FIFO Empty */
-#define                nFIFOEMPTY  0x0       
 #define                  COMPLETE  0x8        /* DMA Complete */
-#define                 nCOMPLETE  0x0       
 #define                      HSHK  0x10       /* Host Handshake */
-#define                     nHSHK  0x0       
 #define                   TIMEOUT  0x20       /* Host Timeout */
-#define                  nTIMEOUT  0x0       
 #define                      HIRQ  0x40       /* Host Interrupt Request */
-#define                     nHIRQ  0x0       
 #define                ALLOW_CNFG  0x80       /* Allow New Configuration */
-#define               nALLOW_CNFG  0x0       
 #define                   DMA_DIR  0x100      /* DMA Direction */
-#define                  nDMA_DIR  0x0       
 #define                       BTE  0x200      /* Bus Timeout Enabled */
-#define                      nBTE  0x0       
 
 /* Bit masks for HOST_TIMEOUT */
 
@@ -697,67 +662,42 @@
 /* Bit masks for TIMER_ENABLE1 */
 
 #define                    TIMEN8  0x1        /* Timer 8 Enable */
-#define                   nTIMEN8  0x0       
 #define                    TIMEN9  0x2        /* Timer 9 Enable */
-#define                   nTIMEN9  0x0       
 #define                   TIMEN10  0x4        /* Timer 10 Enable */
-#define                  nTIMEN10  0x0       
 
 /* Bit masks for TIMER_DISABLE1 */
 
 #define                   TIMDIS8  0x1        /* Timer 8 Disable */
-#define                  nTIMDIS8  0x0       
 #define                   TIMDIS9  0x2        /* Timer 9 Disable */
-#define                  nTIMDIS9  0x0       
 #define                  TIMDIS10  0x4        /* Timer 10 Disable */
-#define                 nTIMDIS10  0x0       
 
 /* Bit masks for TIMER_STATUS1 */
 
 #define                    TIMIL8  0x1        /* Timer 8 Interrupt */
-#define                   nTIMIL8  0x0       
 #define                    TIMIL9  0x2        /* Timer 9 Interrupt */
-#define                   nTIMIL9  0x0       
 #define                   TIMIL10  0x4        /* Timer 10 Interrupt */
-#define                  nTIMIL10  0x0       
 #define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
-#define                nTOVF_ERR8  0x0       
 #define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
-#define                nTOVF_ERR9  0x0       
 #define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
-#define               nTOVF_ERR10  0x0       
 #define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
-#define                    nTRUN8  0x0       
 #define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
-#define                    nTRUN9  0x0       
 #define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
-#define                   nTRUN10  0x0       
 
 /* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
 
 /* Bit masks for HMDMAx_CONTROL */
 
 #define                   HMDMAEN  0x1        /* Handshake MDMA Enable */
-#define                  nHMDMAEN  0x0       
 #define                       REP  0x2        /* Handshake MDMA Request Polarity */
-#define                      nREP  0x0       
 #define                       UTE  0x8        /* Urgency Threshold Enable */
-#define                      nUTE  0x0       
 #define                       OIE  0x10       /* Overflow Interrupt Enable */
-#define                      nOIE  0x0       
 #define                      BDIE  0x20       /* Block Done Interrupt Enable */
-#define                     nBDIE  0x0       
 #define                      MBDI  0x40       /* Mask Block Done Interrupt */
-#define                     nMBDI  0x0       
 #define                       DRQ  0x300      /* Handshake MDMA Request Type */
 #define                       RBC  0x1000     /* Force Reload of BCOUNT */
-#define                      nRBC  0x0       
 #define                        PS  0x2000     /* Pin Status */
-#define                       nPS  0x0       
 #define                        OI  0x4000     /* Overflow Interrupt Generated */
-#define                       nOI  0x0       
 #define                       BDI  0x8000     /* Block Done Interrupt Generated */
-#define                      nBDI  0x0       
 
 /* ******************************************* */
 /*     MULTI BIT MACRO ENUMERATIONS            */
diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/include/asm-blackfin/mach-bf548/defBF548.h
index d9e3062a911..8d4214e0807 100644
--- a/include/asm-blackfin/mach-bf548/defBF548.h
+++ b/include/asm-blackfin/mach-bf548/defBF548.h
@@ -899,21 +899,13 @@
 /* Bit masks for PIXC_CTL */
 
 #define                   PIXC_EN  0x1        /* Pixel Compositor Enable */
-#define                  nPIXC_EN  0x0       
 #define                  OVR_A_EN  0x2        /* Overlay A Enable */
-#define                 nOVR_A_EN  0x0       
 #define                  OVR_B_EN  0x4        /* Overlay B Enable */
-#define                 nOVR_B_EN  0x0       
 #define                  IMG_FORM  0x8        /* Image Data Format */
-#define                 nIMG_FORM  0x0       
 #define                  OVR_FORM  0x10       /* Overlay Data Format */
-#define                 nOVR_FORM  0x0       
 #define                  OUT_FORM  0x20       /* Output Data Format */
-#define                 nOUT_FORM  0x0       
 #define                   UDS_MOD  0x40       /* Resampling Mode */
-#define                  nUDS_MOD  0x0       
 #define                     TC_EN  0x80       /* Transparent Color Enable */
-#define                    nTC_EN  0x0       
 #define                  IMG_STAT  0x300      /* Image FIFO Status */
 #define                  OVR_STAT  0xc00      /* Overlay FIFO Status */
 #define                    WM_LVL  0x3000     /* FIFO Watermark Level */
@@ -961,13 +953,9 @@
 /* Bit masks for PIXC_INTRSTAT */
 
 #define                OVR_INT_EN  0x1        /* Interrupt at End of Last Valid Overlay */
-#define               nOVR_INT_EN  0x0       
 #define                FRM_INT_EN  0x2        /* Interrupt at End of Frame */
-#define               nFRM_INT_EN  0x0       
 #define              OVR_INT_STAT  0x4        /* Overlay Interrupt Status */
-#define             nOVR_INT_STAT  0x0       
 #define              FRM_INT_STAT  0x8        /* Frame Interrupt Status */
-#define             nFRM_INT_STAT  0x0       
 
 /* Bit masks for PIXC_RYCON */
 
@@ -975,7 +963,6 @@
 #define                       A12  0xffc00    /* A12 in the Coefficient Matrix */
 #define                       A13  0x3ff00000 /* A13 in the Coefficient Matrix */
 #define                  RY_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nRY_MULT4  0x0       
 
 /* Bit masks for PIXC_GUCON */
 
@@ -983,7 +970,6 @@
 #define                       A22  0xffc00    /* A22 in the Coefficient Matrix */
 #define                       A23  0x3ff00000 /* A23 in the Coefficient Matrix */
 #define                  GU_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nGU_MULT4  0x0       
 
 /* Bit masks for PIXC_BVCON */
 
@@ -991,7 +977,6 @@
 #define                       A32  0xffc00    /* A32 in the Coefficient Matrix */
 #define                       A33  0x3ff00000 /* A33 in the Coefficient Matrix */
 #define                  BV_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nBV_MULT4  0x0       
 
 /* Bit masks for PIXC_CCBIAS */
 
@@ -1008,48 +993,28 @@
 /* Bit masks for HOST_CONTROL */
 
 #define                   HOST_EN  0x1        /* Host Enable */
-#define                  nHOST_EN  0x0       
 #define                  HOST_END  0x2        /* Host Endianess */
-#define                 nHOST_END  0x0       
 #define                 DATA_SIZE  0x4        /* Data Size */
-#define                nDATA_SIZE  0x0       
 #define                  HOST_RST  0x8        /* Host Reset */
-#define                 nHOST_RST  0x0       
 #define                  HRDY_OVR  0x20       /* Host Ready Override */
-#define                 nHRDY_OVR  0x0       
 #define                  INT_MODE  0x40       /* Interrupt Mode */
-#define                 nINT_MODE  0x0       
 #define                     BT_EN  0x80       /* Bus Timeout Enable */
-#define                    nBT_EN  0x0       
 #define                       EHW  0x100      /* Enable Host Write */
-#define                      nEHW  0x0       
 #define                       EHR  0x200      /* Enable Host Read */
-#define                      nEHR  0x0       
 #define                       BDR  0x400      /* Burst DMA Requests */
-#define                      nBDR  0x0       
 
 /* Bit masks for HOST_STATUS */
 
 #define                     READY  0x1        /* DMA Ready */
-#define                    nREADY  0x0       
 #define                  FIFOFULL  0x2        /* FIFO Full */
-#define                 nFIFOFULL  0x0       
 #define                 FIFOEMPTY  0x4        /* FIFO Empty */
-#define                nFIFOEMPTY  0x0       
 #define                  COMPLETE  0x8        /* DMA Complete */
-#define                 nCOMPLETE  0x0       
 #define                      HSHK  0x10       /* Host Handshake */
-#define                     nHSHK  0x0       
 #define                   TIMEOUT  0x20       /* Host Timeout */
-#define                  nTIMEOUT  0x0       
 #define                      HIRQ  0x40       /* Host Interrupt Request */
-#define                     nHIRQ  0x0       
 #define                ALLOW_CNFG  0x80       /* Allow New Configuration */
-#define               nALLOW_CNFG  0x0       
 #define                   DMA_DIR  0x100      /* DMA Direction */
-#define                  nDMA_DIR  0x0       
 #define                       BTE  0x200      /* Bus Timeout Enabled */
-#define                      nBTE  0x0       
 
 /* Bit masks for HOST_TIMEOUT */
 
@@ -1058,7 +1023,6 @@
 /* Bit masks for KPAD_CTL */
 
 #define                   KPAD_EN  0x1        /* Keypad Enable */
-#define                  nKPAD_EN  0x0       
 #define              KPAD_IRQMODE  0x6        /* Key Press Interrupt Enable */
 #define                KPAD_ROWEN  0x1c00     /* Row Enable Width */
 #define                KPAD_COLEN  0xe000     /* Column Enable Width */
@@ -1080,29 +1044,21 @@
 /* Bit masks for KPAD_STAT */
 
 #define                  KPAD_IRQ  0x1        /* Keypad Interrupt Status */
-#define                 nKPAD_IRQ  0x0       
 #define              KPAD_MROWCOL  0x6        /* Multiple Row/Column Keypress Status */
 #define              KPAD_PRESSED  0x8        /* Key press current status */
-#define             nKPAD_PRESSED  0x0       
 
 /* Bit masks for KPAD_SOFTEVAL */
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
-#define          nKPAD_SOFTEVAL_E  0x0       
 
 /* Bit masks for SDH_COMMAND */
 
 #define                   CMD_IDX  0x3f       /* Command Index */
 #define                   CMD_RSP  0x40       /* Response */
-#define                  nCMD_RSP  0x0       
 #define                 CMD_L_RSP  0x80       /* Long Response */
-#define                nCMD_L_RSP  0x0       
 #define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                nCMD_INT_E  0x0       
 #define                CMD_PEND_E  0x200      /* Command Pending */
-#define               nCMD_PEND_E  0x0       
 #define                     CMD_E  0x400      /* Command Enable */
-#define                    nCMD_E  0x0       
 
 /* Bit masks for SDH_PWR_CTL */
 
@@ -1111,21 +1067,15 @@
 #define                       TBD  0x3c       /* TBD */
 #endif
 #define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                nSD_CMD_OD  0x0       
 #define                   ROD_CTL  0x80       /* Rod Control */
-#define                  nROD_CTL  0x0       
 
 /* Bit masks for SDH_CLK_CTL */
 
 #define                    CLKDIV  0xff       /* MC_CLK Divisor */
 #define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                    nCLK_E  0x0       
 #define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define                 nPWR_SV_E  0x0       
 #define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define            nCLKDIV_BYPASS  0x0       
 #define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-#define                 nWIDE_BUS  0x0       
 
 /* Bit masks for SDH_RESP_CMD */
 
@@ -1134,133 +1084,74 @@
 /* Bit masks for SDH_DATA_CTL */
 
 #define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                    nDTX_E  0x0       
 #define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  nDTX_DIR  0x0       
 #define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 nDTX_MODE  0x0       
 #define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define                nDTX_DMA_E  0x0       
 #define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
 
 /* Bit masks for SDH_STATUS */
 
 #define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define             nCMD_CRC_FAIL  0x0       
 #define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define             nDAT_CRC_FAIL  0x0       
 #define               CMD_TIMEOUT  0x4        /* CMD Time Out */
-#define              nCMD_TIMEOUT  0x0       
 #define               DAT_TIMEOUT  0x8        /* Data Time Out */
-#define              nDAT_TIMEOUT  0x0       
 #define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define              nTX_UNDERRUN  0x0       
 #define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define               nRX_OVERRUN  0x0       
 #define              CMD_RESP_END  0x40       /* CMD Response End */
-#define             nCMD_RESP_END  0x0       
 #define                  CMD_SENT  0x80       /* CMD Sent */
-#define                 nCMD_SENT  0x0       
 #define                   DAT_END  0x100      /* Data End */
-#define                  nDAT_END  0x0       
 #define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define            nSTART_BIT_ERR  0x0       
 #define               DAT_BLK_END  0x400      /* Data Block End */
-#define              nDAT_BLK_END  0x0       
 #define                   CMD_ACT  0x800      /* CMD Active */
-#define                  nCMD_ACT  0x0       
 #define                    TX_ACT  0x1000     /* Transmit Active */
-#define                   nTX_ACT  0x0       
 #define                    RX_ACT  0x2000     /* Receive Active */
-#define                   nRX_ACT  0x0       
 #define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define             nTX_FIFO_STAT  0x0       
 #define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define             nRX_FIFO_STAT  0x0       
 #define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define             nTX_FIFO_FULL  0x0       
 #define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define             nRX_FIFO_FULL  0x0       
 #define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define             nTX_FIFO_ZERO  0x0       
 #define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define              nRX_DAT_ZERO  0x0       
 #define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               nTX_DAT_RDY  0x0       
 #define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-#define              nRX_FIFO_RDY  0x0       
 
 /* Bit masks for SDH_STATUS_CLR */
 
 #define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define        nCMD_CRC_FAIL_STAT  0x0       
 #define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define        nDAT_CRC_FAIL_STAT  0x0       
 #define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define         nCMD_TIMEOUT_STAT  0x0       
 #define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define         nDAT_TIMEOUT_STAT  0x0       
 #define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define         nTX_UNDERRUN_STAT  0x0       
 #define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define          nRX_OVERRUN_STAT  0x0       
 #define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define        nCMD_RESP_END_STAT  0x0       
 #define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define            nCMD_SENT_STAT  0x0       
 #define              DAT_END_STAT  0x100      /* Data End Status */
-#define             nDAT_END_STAT  0x0       
 #define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define       nSTART_BIT_ERR_STAT  0x0       
 #define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-#define         nDAT_BLK_END_STAT  0x0       
 
 /* Bit masks for SDH_MASK0 */
 
 #define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define        nCMD_CRC_FAIL_MASK  0x0       
 #define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define        nDAT_CRC_FAIL_MASK  0x0       
 #define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define         nCMD_TIMEOUT_MASK  0x0       
 #define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define         nDAT_TIMEOUT_MASK  0x0       
 #define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define         nTX_UNDERRUN_MASK  0x0       
 #define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define          nRX_OVERRUN_MASK  0x0       
 #define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define        nCMD_RESP_END_MASK  0x0       
 #define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define            nCMD_SENT_MASK  0x0       
 #define              DAT_END_MASK  0x100      /* Data End Mask */
-#define             nDAT_END_MASK  0x0       
 #define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define       nSTART_BIT_ERR_MASK  0x0       
 #define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define         nDAT_BLK_END_MASK  0x0       
 #define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define             nCMD_ACT_MASK  0x0       
 #define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define              nTX_ACT_MASK  0x0       
 #define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define              nRX_ACT_MASK  0x0       
 #define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define        nTX_FIFO_STAT_MASK  0x0       
 #define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define        nRX_FIFO_STAT_MASK  0x0       
 #define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define        nTX_FIFO_FULL_MASK  0x0       
 #define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define        nRX_FIFO_FULL_MASK  0x0       
 #define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define        nTX_FIFO_ZERO_MASK  0x0       
 #define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define         nRX_DAT_ZERO_MASK  0x0       
 #define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          nTX_DAT_RDY_MASK  0x0       
 #define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-#define         nRX_FIFO_RDY_MASK  0x0       
 
 /* Bit masks for SDH_FIFO_CNT */
 
@@ -1269,73 +1160,47 @@
 /* Bit masks for SDH_E_STATUS */
 
 #define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define             nSDIO_INT_DET  0x0       
 #define               SD_CARD_DET  0x10       /* SD Card Detect */
-#define              nSD_CARD_DET  0x0       
 
 /* Bit masks for SDH_E_MASK */
 
 #define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                 nSDIO_MSK  0x0       
 #define                   SCD_MSK  0x40       /* Mask Card Detect */
-#define                  nSCD_MSK  0x0       
 
 /* Bit masks for SDH_CFG */
 
 #define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                  nCLKS_EN  0x0       
 #define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                     nSD4E  0x0       
 #define                       MWE  0x8        /* Moving Window Enable */
-#define                      nMWE  0x0       
 #define                    SD_RST  0x10       /* SDMMC Reset */
-#define                   nSD_RST  0x0       
 #define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                nPUP_SDDAT  0x0       
 #define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define               nPUP_SDDAT3  0x0       
 #define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-#define                nPD_SDDAT3  0x0       
 
 /* Bit masks for SDH_RD_WAIT_EN */
 
 #define                       RWR  0x1        /* Read Wait Request */
-#define                      nRWR  0x0       
 
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */
-#define                nPIO_START  0x0       
 #define               MULTI_START  0x2        /* Start Multi-DMA Op */
-#define              nMULTI_START  0x0       
 #define               ULTRA_START  0x4        /* Start Ultra-DMA Op */
-#define              nULTRA_START  0x0       
 #define                  XFER_DIR  0x8        /* Transfer Direction */
-#define                 nXFER_DIR  0x0       
 #define                  IORDY_EN  0x10       /* IORDY Enable */
-#define                 nIORDY_EN  0x0       
 #define                FIFO_FLUSH  0x20       /* Flush FIFOs */
-#define               nFIFO_FLUSH  0x0       
 #define                  SOFT_RST  0x40       /* Soft Reset */
-#define                 nSOFT_RST  0x0       
 #define                   DEV_RST  0x80       /* Device Reset */
-#define                  nDEV_RST  0x0       
 #define                TFRCNT_RST  0x100      /* Trans Count Reset */
-#define               nTFRCNT_RST  0x0       
 #define               END_ON_TERM  0x200      /* End/Terminate Select */
-#define              nEND_ON_TERM  0x0       
 #define               PIO_USE_DMA  0x400      /* PIO-DMA Enable */
-#define              nPIO_USE_DMA  0x0       
 #define          UDMAIN_FIFO_THRS  0xf000     /* Ultra DMA-IN FIFO Threshold */
 
 /* Bit masks for ATAPI_STATUS */
 
 #define               PIO_XFER_ON  0x1        /* PIO transfer in progress */
-#define              nPIO_XFER_ON  0x0       
 #define             MULTI_XFER_ON  0x2        /* Multi-word DMA transfer in progress */
-#define            nMULTI_XFER_ON  0x0       
 #define             ULTRA_XFER_ON  0x4        /* Ultra DMA transfer in progress */
-#define            nULTRA_XFER_ON  0x0       
 #define               ULTRA_IN_FL  0xf0       /* Ultra DMA Input FIFO Level */
 
 /* Bit masks for ATAPI_DEV_ADDR */
@@ -1345,66 +1210,39 @@
 /* Bit masks for ATAPI_INT_MASK */
 
 #define        ATAPI_DEV_INT_MASK  0x1        /* Device interrupt mask */
-#define       nATAPI_DEV_INT_MASK  0x0       
 #define             PIO_DONE_MASK  0x2        /* PIO transfer done interrupt mask */
-#define            nPIO_DONE_MASK  0x0       
 #define           MULTI_DONE_MASK  0x4        /* Multi-DMA transfer done interrupt mask */
-#define          nMULTI_DONE_MASK  0x0       
 #define          UDMAIN_DONE_MASK  0x8        /* Ultra-DMA in transfer done interrupt mask */
-#define         nUDMAIN_DONE_MASK  0x0       
 #define         UDMAOUT_DONE_MASK  0x10       /* Ultra-DMA out transfer done interrupt mask */
-#define        nUDMAOUT_DONE_MASK  0x0       
 #define       HOST_TERM_XFER_MASK  0x20       /* Host terminate current transfer interrupt mask */
-#define      nHOST_TERM_XFER_MASK  0x0       
 #define           MULTI_TERM_MASK  0x40       /* Device terminate Multi-DMA transfer interrupt mask */
-#define          nMULTI_TERM_MASK  0x0       
 #define          UDMAIN_TERM_MASK  0x80       /* Device terminate Ultra-DMA-in transfer interrupt mask */
-#define         nUDMAIN_TERM_MASK  0x0       
 #define         UDMAOUT_TERM_MASK  0x100      /* Device terminate Ultra-DMA-out transfer interrupt mask */
-#define        nUDMAOUT_TERM_MASK  0x0       
 
 /* Bit masks for ATAPI_INT_STATUS */
 
 #define             ATAPI_DEV_INT  0x1        /* Device interrupt status */
-#define            nATAPI_DEV_INT  0x0       
 #define              PIO_DONE_INT  0x2        /* PIO transfer done interrupt status */
-#define             nPIO_DONE_INT  0x0       
 #define            MULTI_DONE_INT  0x4        /* Multi-DMA transfer done interrupt status */
-#define           nMULTI_DONE_INT  0x0       
 #define           UDMAIN_DONE_INT  0x8        /* Ultra-DMA in transfer done interrupt status */
-#define          nUDMAIN_DONE_INT  0x0       
 #define          UDMAOUT_DONE_INT  0x10       /* Ultra-DMA out transfer done interrupt status */
-#define         nUDMAOUT_DONE_INT  0x0       
 #define        HOST_TERM_XFER_INT  0x20       /* Host terminate current transfer interrupt status */
-#define       nHOST_TERM_XFER_INT  0x0       
 #define            MULTI_TERM_INT  0x40       /* Device terminate Multi-DMA transfer interrupt status */
-#define           nMULTI_TERM_INT  0x0       
 #define           UDMAIN_TERM_INT  0x80       /* Device terminate Ultra-DMA-in transfer interrupt status */
-#define          nUDMAIN_TERM_INT  0x0       
 #define          UDMAOUT_TERM_INT  0x100      /* Device terminate Ultra-DMA-out transfer interrupt status */
-#define         nUDMAOUT_TERM_INT  0x0       
 
 /* Bit masks for ATAPI_LINE_STATUS */
 
 #define                ATAPI_INTR  0x1        /* Device interrupt to host line status */
-#define               nATAPI_INTR  0x0       
 #define                ATAPI_DASP  0x2        /* Device dasp to host line status */
-#define               nATAPI_DASP  0x0       
 #define                ATAPI_CS0N  0x4        /* ATAPI chip select 0 line status */
-#define               nATAPI_CS0N  0x0       
 #define                ATAPI_CS1N  0x8        /* ATAPI chip select 1 line status */
-#define               nATAPI_CS1N  0x0       
 #define                ATAPI_ADDR  0x70       /* ATAPI address line status */
 #define              ATAPI_DMAREQ  0x80       /* ATAPI DMA request line status */
-#define             nATAPI_DMAREQ  0x0       
 #define             ATAPI_DMAACKN  0x100      /* ATAPI DMA acknowledge line status */
-#define            nATAPI_DMAACKN  0x0       
 #define               ATAPI_DIOWN  0x200      /* ATAPI write line status */
-#define              nATAPI_DIOWN  0x0       
 #define               ATAPI_DIORN  0x400      /* ATAPI read line status */
-#define              nATAPI_DIORN  0x0       
 #define               ATAPI_IORDY  0x800      /* ATAPI IORDY line status */
-#define              nATAPI_IORDY  0x0       
 
 /* Bit masks for ATAPI_SM_STATE */
 
@@ -1416,7 +1254,6 @@
 /* Bit masks for ATAPI_TERMINATE */
 
 #define           ATAPI_HOST_TERM  0x1        /* Host terminationation */
-#define          nATAPI_HOST_TERM  0x0       
 
 /* Bit masks for ATAPI_REG_TIM_0 */
 
@@ -1471,41 +1308,26 @@
 /* Bit masks for TIMER_ENABLE1 */
 
 #define                    TIMEN8  0x1        /* Timer 8 Enable */
-#define                   nTIMEN8  0x0       
 #define                    TIMEN9  0x2        /* Timer 9 Enable */
-#define                   nTIMEN9  0x0       
 #define                   TIMEN10  0x4        /* Timer 10 Enable */
-#define                  nTIMEN10  0x0       
 
 /* Bit masks for TIMER_DISABLE1 */
 
 #define                   TIMDIS8  0x1        /* Timer 8 Disable */
-#define                  nTIMDIS8  0x0       
 #define                   TIMDIS9  0x2        /* Timer 9 Disable */
-#define                  nTIMDIS9  0x0       
 #define                  TIMDIS10  0x4        /* Timer 10 Disable */
-#define                 nTIMDIS10  0x0       
 
 /* Bit masks for TIMER_STATUS1 */
 
 #define                    TIMIL8  0x1        /* Timer 8 Interrupt */
-#define                   nTIMIL8  0x0       
 #define                    TIMIL9  0x2        /* Timer 9 Interrupt */
-#define                   nTIMIL9  0x0       
 #define                   TIMIL10  0x4        /* Timer 10 Interrupt */
-#define                  nTIMIL10  0x0       
 #define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
-#define                nTOVF_ERR8  0x0       
 #define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
-#define                nTOVF_ERR9  0x0       
 #define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
-#define               nTOVF_ERR10  0x0       
 #define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
-#define                    nTRUN8  0x0       
 #define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
-#define                    nTRUN9  0x0       
 #define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
-#define                   nTRUN10  0x0       
 
 /* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
 
@@ -1516,131 +1338,77 @@
 /* Bit masks for USB_POWER */
 
 #define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
-#define          nENABLE_SUSPENDM  0x0       
 #define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
-#define             nSUSPEND_MODE  0x0       
 #define               RESUME_MODE  0x4        /* DMA Mode */
-#define              nRESUME_MODE  0x0       
 #define                     RESET  0x8        /* Reset indicator */
-#define                    nRESET  0x0       
 #define                   HS_MODE  0x10       /* High Speed mode indicator */
-#define                  nHS_MODE  0x0       
 #define                 HS_ENABLE  0x20       /* high Speed Enable */
-#define                nHS_ENABLE  0x0       
 #define                 SOFT_CONN  0x40       /* Soft connect */
-#define                nSOFT_CONN  0x0       
 #define                ISO_UPDATE  0x80       /* Isochronous update */
-#define               nISO_UPDATE  0x0       
 
 /* Bit masks for USB_INTRTX */
 
 #define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
-#define                   nEP0_TX  0x0       
 #define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
-#define                   nEP1_TX  0x0       
 #define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
-#define                   nEP2_TX  0x0       
 #define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
-#define                   nEP3_TX  0x0       
 #define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
-#define                   nEP4_TX  0x0       
 #define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
-#define                   nEP5_TX  0x0       
 #define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
-#define                   nEP6_TX  0x0       
 #define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
-#define                   nEP7_TX  0x0       
 
 /* Bit masks for USB_INTRRX */
 
 #define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
-#define                   nEP1_RX  0x0       
 #define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
-#define                   nEP2_RX  0x0       
 #define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
-#define                   nEP3_RX  0x0       
 #define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
-#define                   nEP4_RX  0x0       
 #define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
-#define                   nEP5_RX  0x0       
 #define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
-#define                   nEP6_RX  0x0       
 #define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
-#define                   nEP7_RX  0x0       
 
 /* Bit masks for USB_INTRTXE */
 
 #define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
-#define                 nEP0_TX_E  0x0       
 #define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
-#define                 nEP1_TX_E  0x0       
 #define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
-#define                 nEP2_TX_E  0x0       
 #define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
-#define                 nEP3_TX_E  0x0       
 #define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
-#define                 nEP4_TX_E  0x0       
 #define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
-#define                 nEP5_TX_E  0x0       
 #define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
-#define                 nEP6_TX_E  0x0       
 #define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
-#define                 nEP7_TX_E  0x0       
 
 /* Bit masks for USB_INTRRXE */
 
 #define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
-#define                 nEP1_RX_E  0x0       
 #define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
-#define                 nEP2_RX_E  0x0       
 #define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
-#define                 nEP3_RX_E  0x0       
 #define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
-#define                 nEP4_RX_E  0x0       
 #define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
-#define                 nEP5_RX_E  0x0       
 #define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
-#define                 nEP6_RX_E  0x0       
 #define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
-#define                 nEP7_RX_E  0x0       
 
 /* Bit masks for USB_INTRUSB */
 
 #define                 SUSPEND_B  0x1        /* Suspend indicator */
-#define                nSUSPEND_B  0x0       
 #define                  RESUME_B  0x2        /* Resume indicator */
-#define                 nRESUME_B  0x0       
 #define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
-#define         nRESET_OR_BABLE_B  0x0       
 #define                     SOF_B  0x8        /* Start of frame */
-#define                    nSOF_B  0x0       
 #define                    CONN_B  0x10       /* Connection indicator */
-#define                   nCONN_B  0x0       
 #define                  DISCON_B  0x20       /* Disconnect indicator */
-#define                 nDISCON_B  0x0       
 #define             SESSION_REQ_B  0x40       /* Session Request */
-#define            nSESSION_REQ_B  0x0       
 #define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
-#define             nVBUS_ERROR_B  0x0       
 
 /* Bit masks for USB_INTRUSBE */
 
 #define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
-#define               nSUSPEND_BE  0x0       
 #define                 RESUME_BE  0x2        /* Resume indicator int enable */
-#define                nRESUME_BE  0x0       
 #define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
-#define        nRESET_OR_BABLE_BE  0x0       
 #define                    SOF_BE  0x8        /* Start of frame int enable */
-#define                   nSOF_BE  0x0       
 #define                   CONN_BE  0x10       /* Connection indicator int enable */
-#define                  nCONN_BE  0x0       
 #define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
-#define                nDISCON_BE  0x0       
 #define            SESSION_REQ_BE  0x40       /* Session Request int enable */
-#define           nSESSION_REQ_BE  0x0       
 #define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
-#define            nVBUS_ERROR_BE  0x0       
 
 /* Bit masks for USB_FRAME */
 
@@ -1653,117 +1421,67 @@
 /* Bit masks for USB_GLOBAL_CTL */
 
 #define                GLOBAL_ENA  0x1        /* enables USB module */
-#define               nGLOBAL_ENA  0x0       
 #define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
-#define               nEP1_TX_ENA  0x0       
 #define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
-#define               nEP2_TX_ENA  0x0       
 #define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
-#define               nEP3_TX_ENA  0x0       
 #define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
-#define               nEP4_TX_ENA  0x0       
 #define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
-#define               nEP5_TX_ENA  0x0       
 #define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
-#define               nEP6_TX_ENA  0x0       
 #define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
-#define               nEP7_TX_ENA  0x0       
 #define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
-#define               nEP1_RX_ENA  0x0       
 #define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
-#define               nEP2_RX_ENA  0x0       
 #define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
-#define               nEP3_RX_ENA  0x0       
 #define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
-#define               nEP4_RX_ENA  0x0       
 #define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
-#define               nEP5_RX_ENA  0x0       
 #define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
-#define               nEP6_RX_ENA  0x0       
 #define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
-#define               nEP7_RX_ENA  0x0       
 
 /* Bit masks for USB_OTG_DEV_CTL */
 
 #define                   SESSION  0x1        /* session indicator */
-#define                  nSESSION  0x0       
 #define                  HOST_REQ  0x2        /* Host negotiation request */
-#define                 nHOST_REQ  0x0       
 #define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
-#define                nHOST_MODE  0x0       
 #define                     VBUS0  0x8        /* Vbus level indicator[0] */
-#define                    nVBUS0  0x0       
 #define                     VBUS1  0x10       /* Vbus level indicator[1] */
-#define                    nVBUS1  0x0       
 #define                     LSDEV  0x20       /* Low-speed indicator */
-#define                    nLSDEV  0x0       
 #define                     FSDEV  0x40       /* Full or High-speed indicator */
-#define                    nFSDEV  0x0       
 #define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
-#define                 nB_DEVICE  0x0       
 
 /* Bit masks for USB_OTG_VBUS_IRQ */
 
 #define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
-#define            nDRIVE_VBUS_ON  0x0       
 #define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
-#define           nDRIVE_VBUS_OFF  0x0       
 #define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
-#define          nCHRG_VBUS_START  0x0       
 #define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
-#define            nCHRG_VBUS_END  0x0       
 #define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
-#define       nDISCHRG_VBUS_START  0x0       
 #define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
-#define         nDISCHRG_VBUS_END  0x0       
 
 /* Bit masks for USB_OTG_VBUS_MASK */
 
 #define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
-#define        nDRIVE_VBUS_ON_ENA  0x0       
 #define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
-#define       nDRIVE_VBUS_OFF_ENA  0x0       
 #define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
-#define      nCHRG_VBUS_START_ENA  0x0       
 #define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
-#define        nCHRG_VBUS_END_ENA  0x0       
 #define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
-#define   nDISCHRG_VBUS_START_ENA  0x0       
 #define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
-#define     nDISCHRG_VBUS_END_ENA  0x0       
 
 /* Bit masks for USB_CSR0 */
 
 #define                  RXPKTRDY  0x1        /* data packet receive indicator */
-#define                 nRXPKTRDY  0x0       
 #define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
-#define                 nTXPKTRDY  0x0       
 #define                STALL_SENT  0x4        /* STALL handshake sent */
-#define               nSTALL_SENT  0x0       
 #define                   DATAEND  0x8        /* Data end indicator */
-#define                  nDATAEND  0x0       
 #define                  SETUPEND  0x10       /* Setup end */
-#define                 nSETUPEND  0x0       
 #define                 SENDSTALL  0x20       /* Send STALL handshake */
-#define                nSENDSTALL  0x0       
 #define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
-#define        nSERVICED_RXPKTRDY  0x0       
 #define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
-#define        nSERVICED_SETUPEND  0x0       
 #define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
-#define                nFLUSHFIFO  0x0       
 #define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
-#define         nSTALL_RECEIVED_H  0x0       
 #define                SETUPPKT_H  0x8        /* send Setup token host mode */
-#define               nSETUPPKT_H  0x0       
 #define                   ERROR_H  0x10       /* timeout error indicator host mode */
-#define                  nERROR_H  0x0       
 #define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
-#define                 nREQPKT_H  0x0       
 #define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
-#define              nSTATUSPKT_H  0x0       
 #define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
-#define            nNAK_TIMEOUT_H  0x0       
 
 /* Bit masks for USB_COUNT0 */
 
@@ -1784,37 +1502,21 @@
 /* Bit masks for USB_TXCSR */
 
 #define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
-#define               nTXPKTRDY_T  0x0       
 #define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
-#define         nFIFO_NOT_EMPTY_T  0x0       
 #define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
-#define               nUNDERRUN_T  0x0       
 #define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
-#define              nFLUSHFIFO_T  0x0       
 #define              STALL_SEND_T  0x10       /* issue a Stall handshake */
-#define             nSTALL_SEND_T  0x0       
 #define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
-#define             nSTALL_SENT_T  0x0       
 #define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_T  0x0       
 #define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
-#define               nINCOMPTX_T  0x0       
 #define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_T  0x0       
 #define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
-#define       nFORCE_DATATOGGLE_T  0x0       
 #define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_T  0x0       
 #define                     ISO_T  0x4000     /* enable Isochronous transfers */
-#define                    nISO_T  0x0       
 #define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
-#define                nAUTOSET_T  0x0       
 #define                  ERROR_TH  0x4        /* error condition host mode */
-#define                 nERROR_TH  0x0       
 #define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_TH  0x0       
 #define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
-#define           nNAK_TIMEOUT_TH  0x0       
 
 /* Bit masks for USB_TXCOUNT */
 
@@ -1823,45 +1525,25 @@
 /* Bit masks for USB_RXCSR */
 
 #define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
-#define               nRXPKTRDY_R  0x0       
 #define               FIFO_FULL_R  0x2        /* FIFO not empty */
-#define              nFIFO_FULL_R  0x0       
 #define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
-#define                nOVERRUN_R  0x0       
 #define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
-#define              nDATAERROR_R  0x0       
 #define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
-#define              nFLUSHFIFO_R  0x0       
 #define              STALL_SEND_R  0x20       /* issue a Stall handshake */
-#define             nSTALL_SEND_R  0x0       
 #define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
-#define             nSTALL_SENT_R  0x0       
 #define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_R  0x0       
 #define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
-#define               nINCOMPRX_R  0x0       
 #define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_R  0x0       
 #define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
-#define                nDISNYET_R  0x0       
 #define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_R  0x0       
 #define                     ISO_R  0x4000     /* enable Isochronous transfers */
-#define                    nISO_R  0x0       
 #define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
-#define              nAUTOCLEAR_R  0x0       
 #define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
-#define                 nERROR_RH  0x0       
 #define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
-#define                nREQPKT_RH  0x0       
 #define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_RH  0x0       
 #define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
-#define              nINCOMPRX_RH  0x0       
 #define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
-#define            nDMAREQMODE_RH  0x0       
 #define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
-#define               nAUTOREQ_RH  0x0       
 
 /* Bit masks for USB_RXCOUNT */
 
@@ -1888,35 +1570,22 @@
 /* Bit masks for USB_DMA_INTERRUPT */
 
 #define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
-#define                 nDMA0_INT  0x0       
 #define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
-#define                 nDMA1_INT  0x0       
 #define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
-#define                 nDMA2_INT  0x0       
 #define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
-#define                 nDMA3_INT  0x0       
 #define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
-#define                 nDMA4_INT  0x0       
 #define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
-#define                 nDMA5_INT  0x0       
 #define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
-#define                 nDMA6_INT  0x0       
 #define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
-#define                 nDMA7_INT  0x0       
 
 /* Bit masks for USB_DMAxCONTROL */
 
 #define                   DMA_ENA  0x1        /* DMA enable */
-#define                  nDMA_ENA  0x0       
 #define                 DIRECTION  0x2        /* direction of DMA transfer */
-#define                nDIRECTION  0x0       
 #define                      MODE  0x4        /* DMA Bus error */
-#define                     nMODE  0x0       
 #define                   INT_ENA  0x8        /* Interrupt enable */
-#define                  nINT_ENA  0x0       
 #define                     EPNUM  0xf0       /* EP number */
 #define                  BUSERROR  0x100      /* DMA Bus error */
-#define                 nBUSERROR  0x0       
 
 /* Bit masks for USB_DMAxADDRHIGH */
 
@@ -1937,26 +1606,16 @@
 /* Bit masks for HMDMAx_CONTROL */
 
 #define                   HMDMAEN  0x1        /* Handshake MDMA Enable */
-#define                  nHMDMAEN  0x0       
 #define                       REP  0x2        /* Handshake MDMA Request Polarity */
-#define                      nREP  0x0       
 #define                       UTE  0x8        /* Urgency Threshold Enable */
-#define                      nUTE  0x0       
 #define                       OIE  0x10       /* Overflow Interrupt Enable */
-#define                      nOIE  0x0       
 #define                      BDIE  0x20       /* Block Done Interrupt Enable */
-#define                     nBDIE  0x0       
 #define                      MBDI  0x40       /* Mask Block Done Interrupt */
-#define                     nMBDI  0x0       
 #define                       DRQ  0x300      /* Handshake MDMA Request Type */
 #define                       RBC  0x1000     /* Force Reload of BCOUNT */
-#define                      nRBC  0x0       
 #define                        PS  0x2000     /* Pin Status */
-#define                       nPS  0x0       
 #define                        OI  0x4000     /* Overflow Interrupt Generated */
-#define                       nOI  0x0       
 #define                       BDI  0x8000     /* Block Done Interrupt Generated */
-#define                      nBDI  0x0       
 
 /* ******************************************* */
 /*     MULTI BIT MACRO ENUMERATIONS            */
diff --git a/include/asm-blackfin/mach-bf548/defBF549.h b/include/asm-blackfin/mach-bf548/defBF549.h
index b1cc1c073b4..c2f4734da48 100644
--- a/include/asm-blackfin/mach-bf548/defBF549.h
+++ b/include/asm-blackfin/mach-bf548/defBF549.h
@@ -1070,21 +1070,13 @@
 /* Bit masks for PIXC_CTL */
 
 #define                   PIXC_EN  0x1        /* Pixel Compositor Enable */
-#define                  nPIXC_EN  0x0       
 #define                  OVR_A_EN  0x2        /* Overlay A Enable */
-#define                 nOVR_A_EN  0x0       
 #define                  OVR_B_EN  0x4        /* Overlay B Enable */
-#define                 nOVR_B_EN  0x0       
 #define                  IMG_FORM  0x8        /* Image Data Format */
-#define                 nIMG_FORM  0x0       
 #define                  OVR_FORM  0x10       /* Overlay Data Format */
-#define                 nOVR_FORM  0x0       
 #define                  OUT_FORM  0x20       /* Output Data Format */
-#define                 nOUT_FORM  0x0       
 #define                   UDS_MOD  0x40       /* Resampling Mode */
-#define                  nUDS_MOD  0x0       
 #define                     TC_EN  0x80       /* Transparent Color Enable */
-#define                    nTC_EN  0x0       
 #define                  IMG_STAT  0x300      /* Image FIFO Status */
 #define                  OVR_STAT  0xc00      /* Overlay FIFO Status */
 #define                    WM_LVL  0x3000     /* FIFO Watermark Level */
@@ -1132,13 +1124,9 @@
 /* Bit masks for PIXC_INTRSTAT */
 
 #define                OVR_INT_EN  0x1        /* Interrupt at End of Last Valid Overlay */
-#define               nOVR_INT_EN  0x0       
 #define                FRM_INT_EN  0x2        /* Interrupt at End of Frame */
-#define               nFRM_INT_EN  0x0       
 #define              OVR_INT_STAT  0x4        /* Overlay Interrupt Status */
-#define             nOVR_INT_STAT  0x0       
 #define              FRM_INT_STAT  0x8        /* Frame Interrupt Status */
-#define             nFRM_INT_STAT  0x0       
 
 /* Bit masks for PIXC_RYCON */
 
@@ -1146,7 +1134,6 @@
 #define                       A12  0xffc00    /* A12 in the Coefficient Matrix */
 #define                       A13  0x3ff00000 /* A13 in the Coefficient Matrix */
 #define                  RY_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nRY_MULT4  0x0       
 
 /* Bit masks for PIXC_GUCON */
 
@@ -1154,7 +1141,6 @@
 #define                       A22  0xffc00    /* A22 in the Coefficient Matrix */
 #define                       A23  0x3ff00000 /* A23 in the Coefficient Matrix */
 #define                  GU_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nGU_MULT4  0x0       
 
 /* Bit masks for PIXC_BVCON */
 
@@ -1162,7 +1148,6 @@
 #define                       A32  0xffc00    /* A32 in the Coefficient Matrix */
 #define                       A33  0x3ff00000 /* A33 in the Coefficient Matrix */
 #define                  BV_MULT4  0x40000000 /* Multiply Row by 4 */
-#define                 nBV_MULT4  0x0       
 
 /* Bit masks for PIXC_CCBIAS */
 
@@ -1179,48 +1164,28 @@
 /* Bit masks for HOST_CONTROL */
 
 #define                   HOST_EN  0x1        /* Host Enable */
-#define                  nHOST_EN  0x0       
 #define                  HOST_END  0x2        /* Host Endianess */
-#define                 nHOST_END  0x0       
 #define                 DATA_SIZE  0x4        /* Data Size */
-#define                nDATA_SIZE  0x0       
 #define                  HOST_RST  0x8        /* Host Reset */
-#define                 nHOST_RST  0x0       
 #define                  HRDY_OVR  0x20       /* Host Ready Override */
-#define                 nHRDY_OVR  0x0       
 #define                  INT_MODE  0x40       /* Interrupt Mode */
-#define                 nINT_MODE  0x0       
 #define                     BT_EN  0x80       /* Bus Timeout Enable */
-#define                    nBT_EN  0x0       
 #define                       EHW  0x100      /* Enable Host Write */
-#define                      nEHW  0x0       
 #define                       EHR  0x200      /* Enable Host Read */
-#define                      nEHR  0x0       
 #define                       BDR  0x400      /* Burst DMA Requests */
-#define                      nBDR  0x0       
 
 /* Bit masks for HOST_STATUS */
 
 #define                     READY  0x1        /* DMA Ready */
-#define                    nREADY  0x0       
 #define                  FIFOFULL  0x2        /* FIFO Full */
-#define                 nFIFOFULL  0x0       
 #define                 FIFOEMPTY  0x4        /* FIFO Empty */
-#define                nFIFOEMPTY  0x0       
-#define                  COMPLETE  0x8        /* DMA Complete */
-#define                 nCOMPLETE  0x0       
+#define              DMA_COMPLETE  0x8        /* DMA Complete */
 #define                      HSHK  0x10       /* Host Handshake */
-#define                     nHSHK  0x0       
 #define                   TIMEOUT  0x20       /* Host Timeout */
-#define                  nTIMEOUT  0x0       
 #define                      HIRQ  0x40       /* Host Interrupt Request */
-#define                     nHIRQ  0x0       
 #define                ALLOW_CNFG  0x80       /* Allow New Configuration */
-#define               nALLOW_CNFG  0x0       
 #define                   DMA_DIR  0x100      /* DMA Direction */
-#define                  nDMA_DIR  0x0       
 #define                       BTE  0x200      /* Bus Timeout Enabled */
-#define                      nBTE  0x0       
 
 /* Bit masks for HOST_TIMEOUT */
 
@@ -1229,71 +1194,41 @@
 /* Bit masks for MXVR_CONFIG */
 
 #define                    MXVREN  0x1        /* MXVR Enable */
-#define                   nMXVREN  0x0       
 #define                      MMSM  0x2        /* MXVR Master/Slave Mode Select */
-#define                     nMMSM  0x0       
 #define                    ACTIVE  0x4        /* Active Mode */
-#define                   nACTIVE  0x0       
 #define                    SDELAY  0x8        /* Synchronous Data Delay */
-#define                   nSDELAY  0x0       
 #define                   NCMRXEN  0x10       /* Normal Control Message Receive Enable */
-#define                  nNCMRXEN  0x0       
 #define                   RWRRXEN  0x20       /* Remote Write Receive Enable */
-#define                  nRWRRXEN  0x0       
 #define                     MTXEN  0x40       /* MXVR Transmit Data Enable */
-#define                    nMTXEN  0x0       
 #define                    MTXONB  0x80       /* MXVR Phy Transmitter On */
-#define                   nMTXONB  0x0       
 #define                   EPARITY  0x100      /* Even Parity Select */
-#define                  nEPARITY  0x0       
 #define                       MSB  0x1e00     /* Master Synchronous Boundary */
 #define                    APRXEN  0x2000     /* Asynchronous Packet Receive Enable */
-#define                   nAPRXEN  0x0       
 #define                    WAKEUP  0x4000     /* Wake-Up */
-#define                   nWAKEUP  0x0       
 #define                     LMECH  0x8000     /* Lock Mechanism Select */
-#define                    nLMECH  0x0       
 
 /* Bit masks for MXVR_STATE_0 */
 
 #define                      NACT  0x1        /* Network Activity */
-#define                     nNACT  0x0       
 #define                    SBLOCK  0x2        /* Super Block Lock */
-#define                   nSBLOCK  0x0       
 #define                   FMPLLST  0xc        /* Frequency Multiply PLL SM State */
 #define                  CDRPLLST  0xe0       /* Clock/Data Recovery PLL SM State */
 #define                     APBSY  0x100      /* Asynchronous Packet Transmit Buffer Busy */
-#define                    nAPBSY  0x0       
 #define                     APARB  0x200      /* Asynchronous Packet Arbitrating */
-#define                    nAPARB  0x0       
 #define                      APTX  0x400      /* Asynchronous Packet Transmitting */
-#define                     nAPTX  0x0       
 #define                      APRX  0x800      /* Receiving Asynchronous Packet */
-#define                     nAPRX  0x0       
 #define                     CMBSY  0x1000     /* Control Message Transmit Buffer Busy */
-#define                    nCMBSY  0x0       
 #define                     CMARB  0x2000     /* Control Message Arbitrating */
-#define                    nCMARB  0x0       
 #define                      CMTX  0x4000     /* Control Message Transmitting */
-#define                     nCMTX  0x0       
 #define                      CMRX  0x8000     /* Receiving Control Message */
-#define                     nCMRX  0x0       
 #define                    MRXONB  0x10000    /* MRXONB Pin State */
-#define                   nMRXONB  0x0       
 #define                     RGSIP  0x20000    /* Remote Get Source In Progress */
-#define                    nRGSIP  0x0       
 #define                     DALIP  0x40000    /* Resource Deallocate In Progress */
-#define                    nDALIP  0x0       
 #define                      ALIP  0x80000    /* Resource Allocate In Progress */
-#define                     nALIP  0x0       
 #define                     RRDIP  0x100000   /* Remote Read In Progress */
-#define                    nRRDIP  0x0       
 #define                     RWRIP  0x200000   /* Remote Write In Progress */
-#define                    nRWRIP  0x0       
 #define                     FLOCK  0x400000   /* Frame Lock */
-#define                    nFLOCK  0x0       
 #define                     BLOCK  0x800000   /* Block Lock */
-#define                    nBLOCK  0x0       
 #define                       RSB  0xf000000  /* Received Synchronous Boundary */
 #define                   DERRNUM  0xf0000000 /* DMA Error Channel Number */
 
@@ -1302,535 +1237,343 @@
 #define                   SRXNUMB  0xf        /* Synchronous Receive FIFO Number of Bytes */
 #define                   STXNUMB  0xf0       /* Synchronous Transmit FIFO Number of Bytes */
 #define                    APCONT  0x100      /* Asynchronous Packet Continuation */
-#define                   nAPCONT  0x0       
 #define                  OBERRNUM  0xe00      /* DMA Out of Bounds Error Channel Number */
 #define                DMAACTIVE0  0x10000    /* DMA0 Active */
-#define               nDMAACTIVE0  0x0       
 #define                DMAACTIVE1  0x20000    /* DMA1 Active */
-#define               nDMAACTIVE1  0x0       
 #define                DMAACTIVE2  0x40000    /* DMA2 Active */
-#define               nDMAACTIVE2  0x0       
 #define                DMAACTIVE3  0x80000    /* DMA3 Active */
-#define               nDMAACTIVE3  0x0       
 #define                DMAACTIVE4  0x100000   /* DMA4 Active */
-#define               nDMAACTIVE4  0x0       
 #define                DMAACTIVE5  0x200000   /* DMA5 Active */
-#define               nDMAACTIVE5  0x0       
 #define                DMAACTIVE6  0x400000   /* DMA6 Active */
-#define               nDMAACTIVE6  0x0       
 #define                DMAACTIVE7  0x800000   /* DMA7 Active */
-#define               nDMAACTIVE7  0x0       
 #define                  DMAPMEN0  0x1000000  /* DMA0 Pattern Matching Enabled */
-#define                 nDMAPMEN0  0x0       
 #define                  DMAPMEN1  0x2000000  /* DMA1 Pattern Matching Enabled */
-#define                 nDMAPMEN1  0x0       
 #define                  DMAPMEN2  0x4000000  /* DMA2 Pattern Matching Enabled */
-#define                 nDMAPMEN2  0x0       
 #define                  DMAPMEN3  0x8000000  /* DMA3 Pattern Matching Enabled */
-#define                 nDMAPMEN3  0x0       
 #define                  DMAPMEN4  0x10000000 /* DMA4 Pattern Matching Enabled */
-#define                 nDMAPMEN4  0x0       
 #define                  DMAPMEN5  0x20000000 /* DMA5 Pattern Matching Enabled */
-#define                 nDMAPMEN5  0x0       
 #define                  DMAPMEN6  0x40000000 /* DMA6 Pattern Matching Enabled */
-#define                 nDMAPMEN6  0x0       
 #define                  DMAPMEN7  0x80000000 /* DMA7 Pattern Matching Enabled */
-#define                 nDMAPMEN7  0x0       
 
 /* Bit masks for MXVR_INT_STAT_0 */
 
 #define                      NI2A  0x1        /* Network Inactive to Active */
-#define                     nNI2A  0x0       
 #define                      NA2I  0x2        /* Network Active to Inactive */
-#define                     nNA2I  0x0       
 #define                     SBU2L  0x4        /* Super Block Unlock to Lock */
-#define                    nSBU2L  0x0       
 #define                     SBL2U  0x8        /* Super Block Lock to Unlock */
-#define                    nSBL2U  0x0       
 #define                       PRU  0x10       /* Position Register Updated */
-#define                      nPRU  0x0       
 #define                      MPRU  0x20       /* Maximum Position Register Updated */
-#define                     nMPRU  0x0       
 #define                       DRU  0x40       /* Delay Register Updated */
-#define                      nDRU  0x0       
 #define                      MDRU  0x80       /* Maximum Delay Register Updated */
-#define                     nMDRU  0x0       
 #define                       SBU  0x100      /* Synchronous Boundary Updated */
-#define                      nSBU  0x0       
 #define                       ATU  0x200      /* Allocation Table Updated */
-#define                      nATU  0x0       
 #define                      FCZ0  0x400      /* Frame Counter 0 Zero */
-#define                     nFCZ0  0x0       
 #define                      FCZ1  0x800      /* Frame Counter 1 Zero */
-#define                     nFCZ1  0x0       
 #define                      PERR  0x1000     /* Parity Error */
-#define                     nPERR  0x0       
 #define                      MH2L  0x2000     /* MRXONB High to Low */
-#define                     nMH2L  0x0       
 #define                      ML2H  0x4000     /* MRXONB Low to High */
-#define                     nML2H  0x0       
 #define                       WUP  0x8000     /* Wake-Up Preamble Received */
-#define                      nWUP  0x0       
 #define                      FU2L  0x10000    /* Frame Unlock to Lock */
-#define                     nFU2L  0x0       
 #define                      FL2U  0x20000    /* Frame Lock to Unlock */
-#define                     nFL2U  0x0       
 #define                      BU2L  0x40000    /* Block Unlock to Lock */
-#define                     nBU2L  0x0       
 #define                      BL2U  0x80000    /* Block Lock to Unlock */
-#define                     nBL2U  0x0       
 #define                     OBERR  0x100000   /* DMA Out of Bounds Error */
-#define                    nOBERR  0x0       
 #define                       PFL  0x200000   /* PLL Frequency Locked */
-#define                      nPFL  0x0       
 #define                       SCZ  0x400000   /* System Clock Counter Zero */
-#define                      nSCZ  0x0       
 #define                      FERR  0x800000   /* FIFO Error */
-#define                     nFERR  0x0       
 #define                       CMR  0x1000000  /* Control Message Received */
-#define                      nCMR  0x0       
 #define                     CMROF  0x2000000  /* Control Message Receive Buffer Overflow */
-#define                    nCMROF  0x0       
 #define                      CMTS  0x4000000  /* Control Message Transmit Buffer Successfully Sent */
-#define                     nCMTS  0x0       
 #define                      CMTC  0x8000000  /* Control Message Transmit Buffer Successfully Cancelled */
-#define                     nCMTC  0x0       
 #define                      RWRC  0x10000000 /* Remote Write Control Message Completed */
-#define                     nRWRC  0x0       
 #define                       BCZ  0x20000000 /* Block Counter Zero */
-#define                      nBCZ  0x0       
 #define                     BMERR  0x40000000 /* Biphase Mark Coding Error */
-#define                    nBMERR  0x0       
 #define                      DERR  0x80000000 /* DMA Error */
-#define                     nDERR  0x0       
 
 /* Bit masks for MXVR_INT_STAT_1 */
 
 #define                    HDONE0  0x1        /* DMA0 Half Done */
-#define                   nHDONE0  0x0       
 #define                     DONE0  0x2        /* DMA0 Done */
-#define                    nDONE0  0x0       
 #define                       APR  0x4        /* Asynchronous Packet Received */
-#define                      nAPR  0x0       
 #define                     APROF  0x8        /* Asynchronous Packet Receive Buffer Overflow */
-#define                    nAPROF  0x0       
 #define                    HDONE1  0x10       /* DMA1 Half Done */
-#define                   nHDONE1  0x0       
 #define                     DONE1  0x20       /* DMA1 Done */
-#define                    nDONE1  0x0       
 #define                      APTS  0x40       /* Asynchronous Packet Transmit Buffer Successfully Sent */
-#define                     nAPTS  0x0       
 #define                      APTC  0x80       /* Asynchronous Packet Transmit Buffer Successfully Cancelled */
-#define                     nAPTC  0x0       
 #define                    HDONE2  0x100      /* DMA2 Half Done */
-#define                   nHDONE2  0x0       
 #define                     DONE2  0x200      /* DMA2 Done */
-#define                    nDONE2  0x0       
 #define                     APRCE  0x400      /* Asynchronous Packet Receive CRC Error */
-#define                    nAPRCE  0x0       
 #define                     APRPE  0x800      /* Asynchronous Packet Receive Packet Error */
-#define                    nAPRPE  0x0       
 #define                    HDONE3  0x1000     /* DMA3 Half Done */
-#define                   nHDONE3  0x0       
 #define                     DONE3  0x2000     /* DMA3 Done */
-#define                    nDONE3  0x0       
 #define                    HDONE4  0x10000    /* DMA4 Half Done */
-#define                   nHDONE4  0x0       
 #define                     DONE4  0x20000    /* DMA4 Done */
-#define                    nDONE4  0x0       
 #define                    HDONE5  0x100000   /* DMA5 Half Done */
-#define                   nHDONE5  0x0       
 #define                     DONE5  0x200000   /* DMA5 Done */
-#define                    nDONE5  0x0       
 #define                    HDONE6  0x1000000  /* DMA6 Half Done */
-#define                   nHDONE6  0x0       
 #define                     DONE6  0x2000000  /* DMA6 Done */
-#define                    nDONE6  0x0       
 #define                    HDONE7  0x10000000 /* DMA7 Half Done */
-#define                   nHDONE7  0x0       
 #define                     DONE7  0x20000000 /* DMA7 Done */
-#define                    nDONE7  0x0       
 
 /* Bit masks for MXVR_INT_EN_0 */
 
 #define                    NI2AEN  0x1        /* Network Inactive to Active Interrupt Enable */
-#define                   nNI2AEN  0x0       
 #define                    NA2IEN  0x2        /* Network Active to Inactive Interrupt Enable */
-#define                   nNA2IEN  0x0       
 #define                   SBU2LEN  0x4        /* Super Block Unlock to Lock Interrupt Enable */
-#define                  nSBU2LEN  0x0       
 #define                   SBL2UEN  0x8        /* Super Block Lock to Unlock Interrupt Enable */
-#define                  nSBL2UEN  0x0       
 #define                     PRUEN  0x10       /* Position Register Updated Interrupt Enable */
-#define                    nPRUEN  0x0       
 #define                    MPRUEN  0x20       /* Maximum Position Register Updated Interrupt Enable */
-#define                   nMPRUEN  0x0       
 #define                     DRUEN  0x40       /* Delay Register Updated Interrupt Enable */
-#define                    nDRUEN  0x0       
 #define                    MDRUEN  0x80       /* Maximum Delay Register Updated Interrupt Enable */
-#define                   nMDRUEN  0x0       
 #define                     SBUEN  0x100      /* Synchronous Boundary Updated Interrupt Enable */
-#define                    nSBUEN  0x0       
 #define                     ATUEN  0x200      /* Allocation Table Updated Interrupt Enable */
-#define                    nATUEN  0x0       
 #define                    FCZ0EN  0x400      /* Frame Counter 0 Zero Interrupt Enable */
-#define                   nFCZ0EN  0x0       
 #define                    FCZ1EN  0x800      /* Frame Counter 1 Zero Interrupt Enable */
-#define                   nFCZ1EN  0x0       
 #define                    PERREN  0x1000     /* Parity Error Interrupt Enable */
-#define                   nPERREN  0x0       
 #define                    MH2LEN  0x2000     /* MRXONB High to Low Interrupt Enable */
-#define                   nMH2LEN  0x0       
 #define                    ML2HEN  0x4000     /* MRXONB Low to High Interrupt Enable */
-#define                   nML2HEN  0x0       
 #define                     WUPEN  0x8000     /* Wake-Up Preamble Received Interrupt Enable */
-#define                    nWUPEN  0x0       
 #define                    FU2LEN  0x10000    /* Frame Unlock to Lock Interrupt Enable */
-#define                   nFU2LEN  0x0       
 #define                    FL2UEN  0x20000    /* Frame Lock to Unlock Interrupt Enable */
-#define                   nFL2UEN  0x0       
 #define                    BU2LEN  0x40000    /* Block Unlock to Lock Interrupt Enable */
-#define                   nBU2LEN  0x0       
 #define                    BL2UEN  0x80000    /* Block Lock to Unlock Interrupt Enable */
-#define                   nBL2UEN  0x0       
 #define                   OBERREN  0x100000   /* DMA Out of Bounds Error Interrupt Enable */
-#define                  nOBERREN  0x0       
 #define                     PFLEN  0x200000   /* PLL Frequency Locked Interrupt Enable */
-#define                    nPFLEN  0x0       
 #define                     SCZEN  0x400000   /* System Clock Counter Zero Interrupt Enable */
-#define                    nSCZEN  0x0       
 #define                    FERREN  0x800000   /* FIFO Error Interrupt Enable */
-#define                   nFERREN  0x0       
 #define                     CMREN  0x1000000  /* Control Message Received Interrupt Enable */
-#define                    nCMREN  0x0       
 #define                   CMROFEN  0x2000000  /* Control Message Receive Buffer Overflow Interrupt Enable */
-#define                  nCMROFEN  0x0       
 #define                    CMTSEN  0x4000000  /* Control Message Transmit Buffer Successfully Sent Interrupt Enable */
-#define                   nCMTSEN  0x0       
 #define                    CMTCEN  0x8000000  /* Control Message Transmit Buffer Successfully Cancelled Interrupt Enable */
-#define                   nCMTCEN  0x0       
 #define                    RWRCEN  0x10000000 /* Remote Write Control Message Completed Interrupt Enable */
-#define                   nRWRCEN  0x0       
 #define                     BCZEN  0x20000000 /* Block Counter Zero Interrupt Enable */
-#define                    nBCZEN  0x0       
 #define                   BMERREN  0x40000000 /* Biphase Mark Coding Error Interrupt Enable */
-#define                  nBMERREN  0x0       
 #define                    DERREN  0x80000000 /* DMA Error Interrupt Enable */
-#define                   nDERREN  0x0       
 
 /* Bit masks for MXVR_INT_EN_1 */
 
 #define                  HDONEEN0  0x1        /* DMA0 Half Done Interrupt Enable */
-#define                 nHDONEEN0  0x0       
 #define                   DONEEN0  0x2        /* DMA0 Done Interrupt Enable */
-#define                  nDONEEN0  0x0       
 #define                     APREN  0x4        /* Asynchronous Packet Received Interrupt Enable */
-#define                    nAPREN  0x0       
 #define                   APROFEN  0x8        /* Asynchronous Packet Receive Buffer Overflow Interrupt Enable */
-#define                  nAPROFEN  0x0       
 #define                  HDONEEN1  0x10       /* DMA1 Half Done Interrupt Enable */
-#define                 nHDONEEN1  0x0       
 #define                   DONEEN1  0x20       /* DMA1 Done Interrupt Enable */
-#define                  nDONEEN1  0x0       
 #define                    APTSEN  0x40       /* Asynchronous Packet Transmit Buffer Successfully Sent Interrupt Enable */
-#define                   nAPTSEN  0x0       
 #define                    APTCEN  0x80       /* Asynchronous Packet Transmit Buffer Successfully Cancelled Interrupt Enable */
-#define                   nAPTCEN  0x0       
 #define                  HDONEEN2  0x100      /* DMA2 Half Done Interrupt Enable */
-#define                 nHDONEEN2  0x0       
 #define                   DONEEN2  0x200      /* DMA2 Done Interrupt Enable */
-#define                  nDONEEN2  0x0       
 #define                   APRCEEN  0x400      /* Asynchronous Packet Receive CRC Error Interrupt Enable */
-#define                  nAPRCEEN  0x0       
 #define                   APRPEEN  0x800      /* Asynchronous Packet Receive Packet Error Interrupt Enable */
-#define                  nAPRPEEN  0x0       
 #define                  HDONEEN3  0x1000     /* DMA3 Half Done Interrupt Enable */
-#define                 nHDONEEN3  0x0       
 #define                   DONEEN3  0x2000     /* DMA3 Done Interrupt Enable */
-#define                  nDONEEN3  0x0       
 #define                  HDONEEN4  0x10000    /* DMA4 Half Done Interrupt Enable */
-#define                 nHDONEEN4  0x0       
 #define                   DONEEN4  0x20000    /* DMA4 Done Interrupt Enable */
-#define                  nDONEEN4  0x0       
 #define                  HDONEEN5  0x100000   /* DMA5 Half Done Interrupt Enable */
-#define                 nHDONEEN5  0x0       
 #define                   DONEEN5  0x200000   /* DMA5 Done Interrupt Enable */
-#define                  nDONEEN5  0x0       
 #define                  HDONEEN6  0x1000000  /* DMA6 Half Done Interrupt Enable */
-#define                 nHDONEEN6  0x0       
 #define                   DONEEN6  0x2000000  /* DMA6 Done Interrupt Enable */
-#define                  nDONEEN6  0x0       
 #define                  HDONEEN7  0x10000000 /* DMA7 Half Done Interrupt Enable */
-#define                 nHDONEEN7  0x0       
 #define                   DONEEN7  0x20000000 /* DMA7 Done Interrupt Enable */
-#define                  nDONEEN7  0x0       
 
 /* Bit masks for MXVR_POSITION */
 
 #define                  POSITION  0x3f       /* Node Position */
 #define                    PVALID  0x8000     /* Node Position Valid */
-#define                   nPVALID  0x0       
 
 /* Bit masks for MXVR_MAX_POSITION */
 
 #define                 MPOSITION  0x3f       /* Maximum Node Position */
 #define                   MPVALID  0x8000     /* Maximum Node Position Valid */
-#define                  nMPVALID  0x0       
 
 /* Bit masks for MXVR_DELAY */
 
 #define                     DELAY  0x3f       /* Node Frame Delay */
 #define                    DVALID  0x8000     /* Node Frame Delay Valid */
-#define                   nDVALID  0x0       
 
 /* Bit masks for MXVR_MAX_DELAY */
 
 #define                    MDELAY  0x3f       /* Maximum Node Frame Delay */
 #define                   MDVALID  0x8000     /* Maximum Node Frame Delay Valid */
-#define                  nMDVALID  0x0       
 
 /* Bit masks for MXVR_LADDR */
 
 #define                     LADDR  0xffff     /* Logical Address */
 #define                    LVALID  0x80000000 /* Logical Address Valid */
-#define                   nLVALID  0x0       
 
 /* Bit masks for MXVR_GADDR */
 
 #define                    GADDRL  0xff       /* Group Address Lower Byte */
 #define                    GVALID  0x8000     /* Group Address Valid */
-#define                   nGVALID  0x0       
 
 /* Bit masks for MXVR_AADDR */
 
 #define                     AADDR  0xffff     /* Alternate Address */
 #define                    AVALID  0x80000000 /* Alternate Address Valid */
-#define                   nAVALID  0x0       
 
 /* Bit masks for MXVR_ALLOC_0 */
 
 #define                       CL0  0x7f       /* Channel 0 Connection Label */
 #define                      CIU0  0x80       /* Channel 0 In Use */
-#define                     nCIU0  0x0       
 #define                       CL1  0x7f00     /* Channel 0 Connection Label */
 #define                      CIU1  0x8000     /* Channel 0 In Use */
-#define                     nCIU1  0x0       
 #define                       CL2  0x7f0000   /* Channel 0 Connection Label */
 #define                      CIU2  0x800000   /* Channel 0 In Use */
-#define                     nCIU2  0x0       
 #define                       CL3  0x7f000000 /* Channel 0 Connection Label */
 #define                      CIU3  0x80000000 /* Channel 0 In Use */
-#define                     nCIU3  0x0       
 
 /* Bit masks for MXVR_ALLOC_1 */
 
 #define                       CL4  0x7f       /* Channel 4 Connection Label */
 #define                      CIU4  0x80       /* Channel 4 In Use */
-#define                     nCIU4  0x0       
 #define                       CL5  0x7f00     /* Channel 5 Connection Label */
 #define                      CIU5  0x8000     /* Channel 5 In Use */
-#define                     nCIU5  0x0       
 #define                       CL6  0x7f0000   /* Channel 6 Connection Label */
 #define                      CIU6  0x800000   /* Channel 6 In Use */
-#define                     nCIU6  0x0       
 #define                       CL7  0x7f000000 /* Channel 7 Connection Label */
 #define                      CIU7  0x80000000 /* Channel 7 In Use */
-#define                     nCIU7  0x0       
 
 /* Bit masks for MXVR_ALLOC_2 */
 
 #define                       CL8  0x7f       /* Channel 8 Connection Label */
 #define                      CIU8  0x80       /* Channel 8 In Use */
-#define                     nCIU8  0x0       
 #define                       CL9  0x7f00     /* Channel 9 Connection Label */
 #define                      CIU9  0x8000     /* Channel 9 In Use */
-#define                     nCIU9  0x0       
 #define                      CL10  0x7f0000   /* Channel 10 Connection Label */
 #define                     CIU10  0x800000   /* Channel 10 In Use */
-#define                    nCIU10  0x0       
 #define                      CL11  0x7f000000 /* Channel 11 Connection Label */
 #define                     CIU11  0x80000000 /* Channel 11 In Use */
-#define                    nCIU11  0x0       
 
 /* Bit masks for MXVR_ALLOC_3 */
 
 #define                      CL12  0x7f       /* Channel 12 Connection Label */
 #define                     CIU12  0x80       /* Channel 12 In Use */
-#define                    nCIU12  0x0       
 #define                      CL13  0x7f00     /* Channel 13 Connection Label */
 #define                     CIU13  0x8000     /* Channel 13 In Use */
-#define                    nCIU13  0x0       
 #define                      CL14  0x7f0000   /* Channel 14 Connection Label */
 #define                     CIU14  0x800000   /* Channel 14 In Use */
-#define                    nCIU14  0x0       
 #define                      CL15  0x7f000000 /* Channel 15 Connection Label */
 #define                     CIU15  0x80000000 /* Channel 15 In Use */
-#define                    nCIU15  0x0       
 
 /* Bit masks for MXVR_ALLOC_4 */
 
 #define                      CL16  0x7f       /* Channel 16 Connection Label */
 #define                     CIU16  0x80       /* Channel 16 In Use */
-#define                    nCIU16  0x0       
 #define                      CL17  0x7f00     /* Channel 17 Connection Label */
 #define                     CIU17  0x8000     /* Channel 17 In Use */
-#define                    nCIU17  0x0       
 #define                      CL18  0x7f0000   /* Channel 18 Connection Label */
 #define                     CIU18  0x800000   /* Channel 18 In Use */
-#define                    nCIU18  0x0       
 #define                      CL19  0x7f000000 /* Channel 19 Connection Label */
 #define                     CIU19  0x80000000 /* Channel 19 In Use */
-#define                    nCIU19  0x0       
 
 /* Bit masks for MXVR_ALLOC_5 */
 
 #define                      CL20  0x7f       /* Channel 20 Connection Label */
 #define                     CIU20  0x80       /* Channel 20 In Use */
-#define                    nCIU20  0x0       
 #define                      CL21  0x7f00     /* Channel 21 Connection Label */
 #define                     CIU21  0x8000     /* Channel 21 In Use */
-#define                    nCIU21  0x0       
 #define                      CL22  0x7f0000   /* Channel 22 Connection Label */
 #define                     CIU22  0x800000   /* Channel 22 In Use */
-#define                    nCIU22  0x0       
 #define                      CL23  0x7f000000 /* Channel 23 Connection Label */
 #define                     CIU23  0x80000000 /* Channel 23 In Use */
-#define                    nCIU23  0x0       
 
 /* Bit masks for MXVR_ALLOC_6 */
 
 #define                      CL24  0x7f       /* Channel 24 Connection Label */
 #define                     CIU24  0x80       /* Channel 24 In Use */
-#define                    nCIU24  0x0       
 #define                      CL25  0x7f00     /* Channel 25 Connection Label */
 #define                     CIU25  0x8000     /* Channel 25 In Use */
-#define                    nCIU25  0x0       
 #define                      CL26  0x7f0000   /* Channel 26 Connection Label */
 #define                     CIU26  0x800000   /* Channel 26 In Use */
-#define                    nCIU26  0x0       
 #define                      CL27  0x7f000000 /* Channel 27 Connection Label */
 #define                     CIU27  0x80000000 /* Channel 27 In Use */
-#define                    nCIU27  0x0       
 
 /* Bit masks for MXVR_ALLOC_7 */
 
 #define                      CL28  0x7f       /* Channel 28 Connection Label */
 #define                     CIU28  0x80       /* Channel 28 In Use */
-#define                    nCIU28  0x0       
 #define                      CL29  0x7f00     /* Channel 29 Connection Label */
 #define                     CIU29  0x8000     /* Channel 29 In Use */
-#define                    nCIU29  0x0       
 #define                      CL30  0x7f0000   /* Channel 30 Connection Label */
 #define                     CIU30  0x800000   /* Channel 30 In Use */
-#define                    nCIU30  0x0       
 #define                      CL31  0x7f000000 /* Channel 31 Connection Label */
 #define                     CIU31  0x80000000 /* Channel 31 In Use */
-#define                    nCIU31  0x0       
 
 /* Bit masks for MXVR_ALLOC_8 */
 
 #define                      CL32  0x7f       /* Channel 32 Connection Label */
 #define                     CIU32  0x80       /* Channel 32 In Use */
-#define                    nCIU32  0x0       
 #define                      CL33  0x7f00     /* Channel 33 Connection Label */
 #define                     CIU33  0x8000     /* Channel 33 In Use */
-#define                    nCIU33  0x0       
 #define                      CL34  0x7f0000   /* Channel 34 Connection Label */
 #define                     CIU34  0x800000   /* Channel 34 In Use */
-#define                    nCIU34  0x0       
 #define                      CL35  0x7f000000 /* Channel 35 Connection Label */
 #define                     CIU35  0x80000000 /* Channel 35 In Use */
-#define                    nCIU35  0x0       
 
 /* Bit masks for MXVR_ALLOC_9 */
 
 #define                      CL36  0x7f       /* Channel 36 Connection Label */
 #define                     CIU36  0x80       /* Channel 36 In Use */
-#define                    nCIU36  0x0       
 #define                      CL37  0x7f00     /* Channel 37 Connection Label */
 #define                     CIU37  0x8000     /* Channel 37 In Use */
-#define                    nCIU37  0x0       
 #define                      CL38  0x7f0000   /* Channel 38 Connection Label */
 #define                     CIU38  0x800000   /* Channel 38 In Use */
-#define                    nCIU38  0x0       
 #define                      CL39  0x7f000000 /* Channel 39 Connection Label */
 #define                     CIU39  0x80000000 /* Channel 39 In Use */
-#define                    nCIU39  0x0       
 
 /* Bit masks for MXVR_ALLOC_10 */
 
 #define                      CL40  0x7f       /* Channel 40 Connection Label */
 #define                     CIU40  0x80       /* Channel 40 In Use */
-#define                    nCIU40  0x0       
 #define                      CL41  0x7f00     /* Channel 41 Connection Label */
 #define                     CIU41  0x8000     /* Channel 41 In Use */
-#define                    nCIU41  0x0       
 #define                      CL42  0x7f0000   /* Channel 42 Connection Label */
 #define                     CIU42  0x800000   /* Channel 42 In Use */
-#define                    nCIU42  0x0       
 #define                      CL43  0x7f000000 /* Channel 43 Connection Label */
 #define                     CIU43  0x80000000 /* Channel 43 In Use */
-#define                    nCIU43  0x0       
 
 /* Bit masks for MXVR_ALLOC_11 */
 
 #define                      CL44  0x7f       /* Channel 44 Connection Label */
 #define                     CIU44  0x80       /* Channel 44 In Use */
-#define                    nCIU44  0x0       
 #define                      CL45  0x7f00     /* Channel 45 Connection Label */
 #define                     CIU45  0x8000     /* Channel 45 In Use */
-#define                    nCIU45  0x0       
 #define                      CL46  0x7f0000   /* Channel 46 Connection Label */
 #define                     CIU46  0x800000   /* Channel 46 In Use */
-#define                    nCIU46  0x0       
 #define                      CL47  0x7f000000 /* Channel 47 Connection Label */
 #define                     CIU47  0x80000000 /* Channel 47 In Use */
-#define                    nCIU47  0x0       
 
 /* Bit masks for MXVR_ALLOC_12 */
 
 #define                      CL48  0x7f       /* Channel 48 Connection Label */
 #define                     CIU48  0x80       /* Channel 48 In Use */
-#define                    nCIU48  0x0       
 #define                      CL49  0x7f00     /* Channel 49 Connection Label */
 #define                     CIU49  0x8000     /* Channel 49 In Use */
-#define                    nCIU49  0x0       
 #define                      CL50  0x7f0000   /* Channel 50 Connection Label */
 #define                     CIU50  0x800000   /* Channel 50 In Use */
-#define                    nCIU50  0x0       
 #define                      CL51  0x7f000000 /* Channel 51 Connection Label */
 #define                     CIU51  0x80000000 /* Channel 51 In Use */
-#define                    nCIU51  0x0       
 
 /* Bit masks for MXVR_ALLOC_13 */
 
 #define                      CL52  0x7f       /* Channel 52 Connection Label */
 #define                     CIU52  0x80       /* Channel 52 In Use */
-#define                    nCIU52  0x0       
 #define                      CL53  0x7f00     /* Channel 53 Connection Label */
 #define                     CIU53  0x8000     /* Channel 53 In Use */
-#define                    nCIU53  0x0       
 #define                      CL54  0x7f0000   /* Channel 54 Connection Label */
 #define                     CIU54  0x800000   /* Channel 54 In Use */
-#define                    nCIU54  0x0       
 #define                      CL55  0x7f000000 /* Channel 55 Connection Label */
 #define                     CIU55  0x80000000 /* Channel 55 In Use */
-#define                    nCIU55  0x0       
 
 /* Bit masks for MXVR_ALLOC_14 */
 
 #define                      CL56  0x7f       /* Channel 56 Connection Label */
 #define                     CIU56  0x80       /* Channel 56 In Use */
-#define                    nCIU56  0x0       
 #define                      CL57  0x7f00     /* Channel 57 Connection Label */
 #define                     CIU57  0x8000     /* Channel 57 In Use */
-#define                    nCIU57  0x0       
 #define                      CL58  0x7f0000   /* Channel 58 Connection Label */
 #define                     CIU58  0x800000   /* Channel 58 In Use */
-#define                    nCIU58  0x0       
 #define                      CL59  0x7f000000 /* Channel 59 Connection Label */
 #define                     CIU59  0x80000000 /* Channel 59 In Use */
-#define                    nCIU59  0x0       
 
 /* MXVR_SYNC_LCHAN_0 Masks */
 
@@ -1926,19 +1669,13 @@
 /* Bit masks for MXVR_DMAx_CONFIG */
 
 #define                    MDMAEN  0x1        /* DMA Channel Enable */
-#define                   nMDMAEN  0x0       
 #define                        DD  0x2        /* DMA Channel Direction */
-#define                       nDD  0x0       
 #define                 BY4SWAPEN  0x20       /* DMA Channel Four Byte Swap Enable */
-#define                nBY4SWAPEN  0x0       
 #define                     LCHAN  0x3c0      /* DMA Channel Logical Channel */
 #define                 BITSWAPEN  0x400      /* DMA Channel Bit Swap Enable */
-#define                nBITSWAPEN  0x0       
 #define                 BY2SWAPEN  0x800      /* DMA Channel Two Byte Swap Enable */
-#define                nBY2SWAPEN  0x0       
 #define                     MFLOW  0x7000     /* DMA Channel Operation Flow */
 #define                   FIXEDPM  0x80000    /* DMA Channel Fixed Pattern Matching Select */
-#define                  nFIXEDPM  0x0       
 #define                  STARTPAT  0x300000   /* DMA Channel Start Pattern Select */
 #define                   STOPPAT  0xc00000   /* DMA Channel Stop Pattern Select */
 #define                  COUNTPOS  0x1c000000 /* DMA Channel Count Position */
@@ -1946,94 +1683,71 @@
 /* Bit masks for MXVR_AP_CTL */
 
 #define                   STARTAP  0x1        /* Start Asynchronous Packet Transmission */
-#define                  nSTARTAP  0x0       
 #define                  CANCELAP  0x2        /* Cancel Asynchronous Packet Transmission */
-#define                 nCANCELAP  0x0       
 #define                   RESETAP  0x4        /* Reset Asynchronous Packet Arbitration */
-#define                  nRESETAP  0x0       
 #define                    APRBE0  0x4000     /* Asynchronous Packet Receive Buffer Entry 0 */
-#define                   nAPRBE0  0x0       
 #define                    APRBE1  0x8000     /* Asynchronous Packet Receive Buffer Entry 1 */
-#define                   nAPRBE1  0x0       
 
 /* Bit masks for MXVR_APRB_START_ADDR */
 
-#define      MXVR_APRB_START_ADDR  0x1fffffe  /* Asynchronous Packet Receive Buffer Start Address */
+#define      MXVR_APRB_START_ADDR_MASK  0x1fffffe  /* Asynchronous Packet Receive Buffer Start Address */
 
 /* Bit masks for MXVR_APRB_CURR_ADDR */
 
-#define       MXVR_APRB_CURR_ADDR  0xffffffff /* Asynchronous Packet Receive Buffer Current Address */
+#define       MXVR_APRB_CURR_ADDR_MASK  0xffffffff /* Asynchronous Packet Receive Buffer Current Address */
 
 /* Bit masks for MXVR_APTB_START_ADDR */
 
-#define       MXVR_APTB_START_ADDR  0x1fffffe  /* Asynchronous Packet Transmit Buffer Start Address */
+#define       MXVR_APTB_START_ADDR_MASK  0x1fffffe  /* Asynchronous Packet Transmit Buffer Start Address */
 
 /* Bit masks for MXVR_APTB_CURR_ADDR */
 
-#define        MXVR_APTB_CURR_ADDR  0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */
+#define        MXVR_APTB_CURR_ADDR_MASK  0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */
 
 /* Bit masks for MXVR_CM_CTL */
 
 #define                   STARTCM  0x1        /* Start Control Message Transmission */
-#define                  nSTARTCM  0x0       
 #define                  CANCELCM  0x2        /* Cancel Control Message Transmission */
-#define                 nCANCELCM  0x0       
 #define                    CMRBE0  0x10000    /* Control Message Receive Buffer Entry 0 */
-#define                   nCMRBE0  0x0       
 #define                    CMRBE1  0x20000    /* Control Message Receive Buffer Entry 1 */
-#define                   nCMRBE1  0x0       
 #define                    CMRBE2  0x40000    /* Control Message Receive Buffer Entry 2 */
-#define                   nCMRBE2  0x0       
 #define                    CMRBE3  0x80000    /* Control Message Receive Buffer Entry 3 */
-#define                   nCMRBE3  0x0       
 #define                    CMRBE4  0x100000   /* Control Message Receive Buffer Entry 4 */
-#define                   nCMRBE4  0x0       
 #define                    CMRBE5  0x200000   /* Control Message Receive Buffer Entry 5 */
-#define                   nCMRBE5  0x0       
 #define                    CMRBE6  0x400000   /* Control Message Receive Buffer Entry 6 */
-#define                   nCMRBE6  0x0       
 #define                    CMRBE7  0x800000   /* Control Message Receive Buffer Entry 7 */
-#define                   nCMRBE7  0x0       
 #define                    CMRBE8  0x1000000  /* Control Message Receive Buffer Entry 8 */
-#define                   nCMRBE8  0x0       
 #define                    CMRBE9  0x2000000  /* Control Message Receive Buffer Entry 9 */
-#define                   nCMRBE9  0x0       
 #define                   CMRBE10  0x4000000  /* Control Message Receive Buffer Entry 10 */
-#define                  nCMRBE10  0x0       
 #define                   CMRBE11  0x8000000  /* Control Message Receive Buffer Entry 11 */
-#define                  nCMRBE11  0x0       
 #define                   CMRBE12  0x10000000 /* Control Message Receive Buffer Entry 12 */
-#define                  nCMRBE12  0x0       
 #define                   CMRBE13  0x20000000 /* Control Message Receive Buffer Entry 13 */
-#define                  nCMRBE13  0x0       
 #define                   CMRBE14  0x40000000 /* Control Message Receive Buffer Entry 14 */
-#define                  nCMRBE14  0x0       
 #define                   CMRBE15  0x80000000 /* Control Message Receive Buffer Entry 15 */
-#define                  nCMRBE15  0x0       
 
 /* Bit masks for MXVR_CMRB_START_ADDR */
 
-#define      MXVR_CMRB_START_ADDR  0x1fffffe  /* Control Message Receive Buffer Start Address */
+#define      MXVR_CMRB_START_ADDR_MASK  0x1fffffe  /* Control Message Receive Buffer Start Address */
 
 /* Bit masks for MXVR_CMRB_CURR_ADDR */
 
-#define       MXVR_CMRB_CURR_ADDR  0xffffffff /* Control Message Receive Buffer Current Address */
+#define       MXVR_CMRB_CURR_ADDR_MASK  0xffffffff /* Control Message Receive Buffer Current Address */
 
 /* Bit masks for MXVR_CMTB_START_ADDR */
 
-#define      MXVR_CMTB_START_ADDR  0x1fffffe  /* Control Message Transmit Buffer Start Address */
+#define      MXVR_CMTB_START_ADDR_MASK  0x1fffffe  /* Control Message Transmit Buffer Start Address */
 
 /* Bit masks for MXVR_CMTB_CURR_ADDR */
 
-#define       MXVR_CMTB_CURR_ADDR  0xffffffff /* Control Message Transmit Buffer Current Address */
+#define       MXVR_CMTB_CURR_ADDR_MASK  0xffffffff /* Control Message Transmit Buffer Current Address */
 
 /* Bit masks for MXVR_RRDB_START_ADDR */
 
-#define      MXVR_RRDB_START_ADDR  0x1fffffe  /* Remote Read Buffer Start Address */
+#define      MXVR_RRDB_START_ADDR_MASK  0x1fffffe  /* Remote Read Buffer Start Address */
 
 /* Bit masks for MXVR_RRDB_CURR_ADDR */
 
-#define       MXVR_RRDB_CURR_ADDR  0xffffffff /* Remote Read Buffer Current Address */
+#define       MXVR_RRDB_CURR_ADDR_MASK  0xffffffff /* Remote Read Buffer Current Address */
 
 /* Bit masks for MXVR_PAT_DATAx */
 
@@ -2045,136 +1759,72 @@
 /* Bit masks for MXVR_PAT_EN_0 */
 
 #define              MATCH_EN_0_0  0x1        /* Pattern Match Enable Byte 0 Bit 0 */
-#define             nMATCH_EN_0_0  0x0       
 #define              MATCH_EN_0_1  0x2        /* Pattern Match Enable Byte 0 Bit 1 */
-#define             nMATCH_EN_0_1  0x0       
 #define              MATCH_EN_0_2  0x4        /* Pattern Match Enable Byte 0 Bit 2 */
-#define             nMATCH_EN_0_2  0x0       
 #define              MATCH_EN_0_3  0x8        /* Pattern Match Enable Byte 0 Bit 3 */
-#define             nMATCH_EN_0_3  0x0       
 #define              MATCH_EN_0_4  0x10       /* Pattern Match Enable Byte 0 Bit 4 */
-#define             nMATCH_EN_0_4  0x0       
 #define              MATCH_EN_0_5  0x20       /* Pattern Match Enable Byte 0 Bit 5 */
-#define             nMATCH_EN_0_5  0x0       
 #define              MATCH_EN_0_6  0x40       /* Pattern Match Enable Byte 0 Bit 6 */
-#define             nMATCH_EN_0_6  0x0       
 #define              MATCH_EN_0_7  0x80       /* Pattern Match Enable Byte 0 Bit 7 */
-#define             nMATCH_EN_0_7  0x0       
 #define              MATCH_EN_1_0  0x100      /* Pattern Match Enable Byte 1 Bit 0 */
-#define             nMATCH_EN_1_0  0x0       
 #define              MATCH_EN_1_1  0x200      /* Pattern Match Enable Byte 1 Bit 1 */
-#define             nMATCH_EN_1_1  0x0       
 #define              MATCH_EN_1_2  0x400      /* Pattern Match Enable Byte 1 Bit 2 */
-#define             nMATCH_EN_1_2  0x0       
 #define              MATCH_EN_1_3  0x800      /* Pattern Match Enable Byte 1 Bit 3 */
-#define             nMATCH_EN_1_3  0x0       
 #define              MATCH_EN_1_4  0x1000     /* Pattern Match Enable Byte 1 Bit 4 */
-#define             nMATCH_EN_1_4  0x0       
 #define              MATCH_EN_1_5  0x2000     /* Pattern Match Enable Byte 1 Bit 5 */
-#define             nMATCH_EN_1_5  0x0       
 #define              MATCH_EN_1_6  0x4000     /* Pattern Match Enable Byte 1 Bit 6 */
-#define             nMATCH_EN_1_6  0x0       
 #define              MATCH_EN_1_7  0x8000     /* Pattern Match Enable Byte 1 Bit 7 */
-#define             nMATCH_EN_1_7  0x0       
 #define              MATCH_EN_2_0  0x10000    /* Pattern Match Enable Byte 2 Bit 0 */
-#define             nMATCH_EN_2_0  0x0       
 #define              MATCH_EN_2_1  0x20000    /* Pattern Match Enable Byte 2 Bit 1 */
-#define             nMATCH_EN_2_1  0x0       
 #define              MATCH_EN_2_2  0x40000    /* Pattern Match Enable Byte 2 Bit 2 */
-#define             nMATCH_EN_2_2  0x0       
 #define              MATCH_EN_2_3  0x80000    /* Pattern Match Enable Byte 2 Bit 3 */
-#define             nMATCH_EN_2_3  0x0       
 #define              MATCH_EN_2_4  0x100000   /* Pattern Match Enable Byte 2 Bit 4 */
-#define             nMATCH_EN_2_4  0x0       
 #define              MATCH_EN_2_5  0x200000   /* Pattern Match Enable Byte 2 Bit 5 */
-#define             nMATCH_EN_2_5  0x0       
 #define              MATCH_EN_2_6  0x400000   /* Pattern Match Enable Byte 2 Bit 6 */
-#define             nMATCH_EN_2_6  0x0       
 #define              MATCH_EN_2_7  0x800000   /* Pattern Match Enable Byte 2 Bit 7 */
-#define             nMATCH_EN_2_7  0x0       
 #define              MATCH_EN_3_0  0x1000000  /* Pattern Match Enable Byte 3 Bit 0 */
-#define             nMATCH_EN_3_0  0x0       
 #define              MATCH_EN_3_1  0x2000000  /* Pattern Match Enable Byte 3 Bit 1 */
-#define             nMATCH_EN_3_1  0x0       
 #define              MATCH_EN_3_2  0x4000000  /* Pattern Match Enable Byte 3 Bit 2 */
-#define             nMATCH_EN_3_2  0x0       
 #define              MATCH_EN_3_3  0x8000000  /* Pattern Match Enable Byte 3 Bit 3 */
-#define             nMATCH_EN_3_3  0x0       
 #define              MATCH_EN_3_4  0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */
-#define             nMATCH_EN_3_4  0x0       
 #define              MATCH_EN_3_5  0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */
-#define             nMATCH_EN_3_5  0x0       
 #define              MATCH_EN_3_6  0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */
-#define             nMATCH_EN_3_6  0x0       
 #define              MATCH_EN_3_7  0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */
-#define             nMATCH_EN_3_7  0x0       
 
 /* Bit masks for MXVR_PAT_EN_1 */
 
 #define              MATCH_EN_0_0  0x1        /* Pattern Match Enable Byte 0 Bit 0 */
-#define             nMATCH_EN_0_0  0x0       
 #define              MATCH_EN_0_1  0x2        /* Pattern Match Enable Byte 0 Bit 1 */
-#define             nMATCH_EN_0_1  0x0       
 #define              MATCH_EN_0_2  0x4        /* Pattern Match Enable Byte 0 Bit 2 */
-#define             nMATCH_EN_0_2  0x0       
 #define              MATCH_EN_0_3  0x8        /* Pattern Match Enable Byte 0 Bit 3 */
-#define             nMATCH_EN_0_3  0x0       
 #define              MATCH_EN_0_4  0x10       /* Pattern Match Enable Byte 0 Bit 4 */
-#define             nMATCH_EN_0_4  0x0       
 #define              MATCH_EN_0_5  0x20       /* Pattern Match Enable Byte 0 Bit 5 */
-#define             nMATCH_EN_0_5  0x0       
 #define              MATCH_EN_0_6  0x40       /* Pattern Match Enable Byte 0 Bit 6 */
-#define             nMATCH_EN_0_6  0x0       
 #define              MATCH_EN_0_7  0x80       /* Pattern Match Enable Byte 0 Bit 7 */
-#define             nMATCH_EN_0_7  0x0       
 #define              MATCH_EN_1_0  0x100      /* Pattern Match Enable Byte 1 Bit 0 */
-#define             nMATCH_EN_1_0  0x0       
 #define              MATCH_EN_1_1  0x200      /* Pattern Match Enable Byte 1 Bit 1 */
-#define             nMATCH_EN_1_1  0x0       
 #define              MATCH_EN_1_2  0x400      /* Pattern Match Enable Byte 1 Bit 2 */
-#define             nMATCH_EN_1_2  0x0       
 #define              MATCH_EN_1_3  0x800      /* Pattern Match Enable Byte 1 Bit 3 */
-#define             nMATCH_EN_1_3  0x0       
 #define              MATCH_EN_1_4  0x1000     /* Pattern Match Enable Byte 1 Bit 4 */
-#define             nMATCH_EN_1_4  0x0       
 #define              MATCH_EN_1_5  0x2000     /* Pattern Match Enable Byte 1 Bit 5 */
-#define             nMATCH_EN_1_5  0x0       
 #define              MATCH_EN_1_6  0x4000     /* Pattern Match Enable Byte 1 Bit 6 */
-#define             nMATCH_EN_1_6  0x0       
 #define              MATCH_EN_1_7  0x8000     /* Pattern Match Enable Byte 1 Bit 7 */
-#define             nMATCH_EN_1_7  0x0       
 #define              MATCH_EN_2_0  0x10000    /* Pattern Match Enable Byte 2 Bit 0 */
-#define             nMATCH_EN_2_0  0x0       
 #define              MATCH_EN_2_1  0x20000    /* Pattern Match Enable Byte 2 Bit 1 */
-#define             nMATCH_EN_2_1  0x0       
 #define              MATCH_EN_2_2  0x40000    /* Pattern Match Enable Byte 2 Bit 2 */
-#define             nMATCH_EN_2_2  0x0       
 #define              MATCH_EN_2_3  0x80000    /* Pattern Match Enable Byte 2 Bit 3 */
-#define             nMATCH_EN_2_3  0x0       
 #define              MATCH_EN_2_4  0x100000   /* Pattern Match Enable Byte 2 Bit 4 */
-#define             nMATCH_EN_2_4  0x0       
 #define              MATCH_EN_2_5  0x200000   /* Pattern Match Enable Byte 2 Bit 5 */
-#define             nMATCH_EN_2_5  0x0       
 #define              MATCH_EN_2_6  0x400000   /* Pattern Match Enable Byte 2 Bit 6 */
-#define             nMATCH_EN_2_6  0x0       
 #define              MATCH_EN_2_7  0x800000   /* Pattern Match Enable Byte 2 Bit 7 */
-#define             nMATCH_EN_2_7  0x0       
 #define              MATCH_EN_3_0  0x1000000  /* Pattern Match Enable Byte 3 Bit 0 */
-#define             nMATCH_EN_3_0  0x0       
 #define              MATCH_EN_3_1  0x2000000  /* Pattern Match Enable Byte 3 Bit 1 */
-#define             nMATCH_EN_3_1  0x0       
 #define              MATCH_EN_3_2  0x4000000  /* Pattern Match Enable Byte 3 Bit 2 */
-#define             nMATCH_EN_3_2  0x0       
 #define              MATCH_EN_3_3  0x8000000  /* Pattern Match Enable Byte 3 Bit 3 */
-#define             nMATCH_EN_3_3  0x0       
 #define              MATCH_EN_3_4  0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */
-#define             nMATCH_EN_3_4  0x0       
 #define              MATCH_EN_3_5  0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */
-#define             nMATCH_EN_3_5  0x0       
 #define              MATCH_EN_3_6  0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */
-#define             nMATCH_EN_3_6  0x0       
 #define              MATCH_EN_3_7  0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */
-#define             nMATCH_EN_3_7  0x0       
 
 /* Bit masks for MXVR_FRAME_CNT_0 */
 
@@ -2188,226 +1838,166 @@
 
 #define                    TX_CH0  0x3f       /* Transmit Channel 0 */
 #define                  MUTE_CH0  0x80       /* Mute Channel 0 */
-#define                 nMUTE_CH0  0x0       
 #define                    TX_CH1  0x3f00     /* Transmit Channel 0 */
 #define                  MUTE_CH1  0x8000     /* Mute Channel 0 */
-#define                 nMUTE_CH1  0x0       
 #define                    TX_CH2  0x3f0000   /* Transmit Channel 0 */
 #define                  MUTE_CH2  0x800000   /* Mute Channel 0 */
-#define                 nMUTE_CH2  0x0       
 #define                    TX_CH3  0x3f000000 /* Transmit Channel 0 */
 #define                  MUTE_CH3  0x80000000 /* Mute Channel 0 */
-#define                 nMUTE_CH3  0x0       
 
 /* Bit masks for MXVR_ROUTING_1 */
 
 #define                    TX_CH4  0x3f       /* Transmit Channel 4 */
 #define                  MUTE_CH4  0x80       /* Mute Channel 4 */
-#define                 nMUTE_CH4  0x0       
 #define                    TX_CH5  0x3f00     /* Transmit Channel 5 */
 #define                  MUTE_CH5  0x8000     /* Mute Channel 5 */
-#define                 nMUTE_CH5  0x0       
 #define                    TX_CH6  0x3f0000   /* Transmit Channel 6 */
 #define                  MUTE_CH6  0x800000   /* Mute Channel 6 */
-#define                 nMUTE_CH6  0x0       
 #define                    TX_CH7  0x3f000000 /* Transmit Channel 7 */
 #define                  MUTE_CH7  0x80000000 /* Mute Channel 7 */
-#define                 nMUTE_CH7  0x0       
 
 /* Bit masks for MXVR_ROUTING_2 */
 
 #define                    TX_CH8  0x3f       /* Transmit Channel 8 */
 #define                  MUTE_CH8  0x80       /* Mute Channel 8 */
-#define                 nMUTE_CH8  0x0       
 #define                    TX_CH9  0x3f00     /* Transmit Channel 9 */
 #define                  MUTE_CH9  0x8000     /* Mute Channel 9 */
-#define                 nMUTE_CH9  0x0       
 #define                   TX_CH10  0x3f0000   /* Transmit Channel 10 */
 #define                 MUTE_CH10  0x800000   /* Mute Channel 10 */
-#define                nMUTE_CH10  0x0       
 #define                   TX_CH11  0x3f000000 /* Transmit Channel 11 */
 #define                 MUTE_CH11  0x80000000 /* Mute Channel 11 */
-#define                nMUTE_CH11  0x0       
 
 /* Bit masks for MXVR_ROUTING_3 */
 
 #define                   TX_CH12  0x3f       /* Transmit Channel 12 */
 #define                 MUTE_CH12  0x80       /* Mute Channel 12 */
-#define                nMUTE_CH12  0x0       
 #define                   TX_CH13  0x3f00     /* Transmit Channel 13 */
 #define                 MUTE_CH13  0x8000     /* Mute Channel 13 */
-#define                nMUTE_CH13  0x0       
 #define                   TX_CH14  0x3f0000   /* Transmit Channel 14 */
 #define                 MUTE_CH14  0x800000   /* Mute Channel 14 */
-#define                nMUTE_CH14  0x0       
 #define                   TX_CH15  0x3f000000 /* Transmit Channel 15 */
 #define                 MUTE_CH15  0x80000000 /* Mute Channel 15 */
-#define                nMUTE_CH15  0x0       
 
 /* Bit masks for MXVR_ROUTING_4 */
 
 #define                   TX_CH16  0x3f       /* Transmit Channel 16 */
 #define                 MUTE_CH16  0x80       /* Mute Channel 16 */
-#define                nMUTE_CH16  0x0       
 #define                   TX_CH17  0x3f00     /* Transmit Channel 17 */
 #define                 MUTE_CH17  0x8000     /* Mute Channel 17 */
-#define                nMUTE_CH17  0x0       
 #define                   TX_CH18  0x3f0000   /* Transmit Channel 18 */
 #define                 MUTE_CH18  0x800000   /* Mute Channel 18 */
-#define                nMUTE_CH18  0x0       
 #define                   TX_CH19  0x3f000000 /* Transmit Channel 19 */
 #define                 MUTE_CH19  0x80000000 /* Mute Channel 19 */
-#define                nMUTE_CH19  0x0       
 
 /* Bit masks for MXVR_ROUTING_5 */
 
 #define                   TX_CH20  0x3f       /* Transmit Channel 20 */
 #define                 MUTE_CH20  0x80       /* Mute Channel 20 */
-#define                nMUTE_CH20  0x0       
 #define                   TX_CH21  0x3f00     /* Transmit Channel 21 */
 #define                 MUTE_CH21  0x8000     /* Mute Channel 21 */
-#define                nMUTE_CH21  0x0       
 #define                   TX_CH22  0x3f0000   /* Transmit Channel 22 */
 #define                 MUTE_CH22  0x800000   /* Mute Channel 22 */
-#define                nMUTE_CH22  0x0       
 #define                   TX_CH23  0x3f000000 /* Transmit Channel 23 */
 #define                 MUTE_CH23  0x80000000 /* Mute Channel 23 */
-#define                nMUTE_CH23  0x0       
 
 /* Bit masks for MXVR_ROUTING_6 */
 
 #define                   TX_CH24  0x3f       /* Transmit Channel 24 */
 #define                 MUTE_CH24  0x80       /* Mute Channel 24 */
-#define                nMUTE_CH24  0x0       
 #define                   TX_CH25  0x3f00     /* Transmit Channel 25 */
 #define                 MUTE_CH25  0x8000     /* Mute Channel 25 */
-#define                nMUTE_CH25  0x0       
 #define                   TX_CH26  0x3f0000   /* Transmit Channel 26 */
 #define                 MUTE_CH26  0x800000   /* Mute Channel 26 */
-#define                nMUTE_CH26  0x0       
 #define                   TX_CH27  0x3f000000 /* Transmit Channel 27 */
 #define                 MUTE_CH27  0x80000000 /* Mute Channel 27 */
-#define                nMUTE_CH27  0x0       
 
 /* Bit masks for MXVR_ROUTING_7 */
 
 #define                   TX_CH28  0x3f       /* Transmit Channel 28 */
 #define                 MUTE_CH28  0x80       /* Mute Channel 28 */
-#define                nMUTE_CH28  0x0       
 #define                   TX_CH29  0x3f00     /* Transmit Channel 29 */
 #define                 MUTE_CH29  0x8000     /* Mute Channel 29 */
-#define                nMUTE_CH29  0x0       
 #define                   TX_CH30  0x3f0000   /* Transmit Channel 30 */
 #define                 MUTE_CH30  0x800000   /* Mute Channel 30 */
-#define                nMUTE_CH30  0x0       
 #define                   TX_CH31  0x3f000000 /* Transmit Channel 31 */
 #define                 MUTE_CH31  0x80000000 /* Mute Channel 31 */
-#define                nMUTE_CH31  0x0       
 
 /* Bit masks for MXVR_ROUTING_8 */
 
 #define                   TX_CH32  0x3f       /* Transmit Channel 32 */
 #define                 MUTE_CH32  0x80       /* Mute Channel 32 */
-#define                nMUTE_CH32  0x0       
 #define                   TX_CH33  0x3f00     /* Transmit Channel 33 */
 #define                 MUTE_CH33  0x8000     /* Mute Channel 33 */
-#define                nMUTE_CH33  0x0       
 #define                   TX_CH34  0x3f0000   /* Transmit Channel 34 */
 #define                 MUTE_CH34  0x800000   /* Mute Channel 34 */
-#define                nMUTE_CH34  0x0       
 #define                   TX_CH35  0x3f000000 /* Transmit Channel 35 */
 #define                 MUTE_CH35  0x80000000 /* Mute Channel 35 */
-#define                nMUTE_CH35  0x0       
 
 /* Bit masks for MXVR_ROUTING_9 */
 
 #define                   TX_CH36  0x3f       /* Transmit Channel 36 */
 #define                 MUTE_CH36  0x80       /* Mute Channel 36 */
-#define                nMUTE_CH36  0x0       
 #define                   TX_CH37  0x3f00     /* Transmit Channel 37 */
 #define                 MUTE_CH37  0x8000     /* Mute Channel 37 */
-#define                nMUTE_CH37  0x0       
 #define                   TX_CH38  0x3f0000   /* Transmit Channel 38 */
 #define                 MUTE_CH38  0x800000   /* Mute Channel 38 */
-#define                nMUTE_CH38  0x0       
 #define                   TX_CH39  0x3f000000 /* Transmit Channel 39 */
 #define                 MUTE_CH39  0x80000000 /* Mute Channel 39 */
-#define                nMUTE_CH39  0x0       
 
 /* Bit masks for MXVR_ROUTING_10 */
 
 #define                   TX_CH40  0x3f       /* Transmit Channel 40 */
 #define                 MUTE_CH40  0x80       /* Mute Channel 40 */
-#define                nMUTE_CH40  0x0       
 #define                   TX_CH41  0x3f00     /* Transmit Channel 41 */
 #define                 MUTE_CH41  0x8000     /* Mute Channel 41 */
-#define                nMUTE_CH41  0x0       
 #define                   TX_CH42  0x3f0000   /* Transmit Channel 42 */
 #define                 MUTE_CH42  0x800000   /* Mute Channel 42 */
-#define                nMUTE_CH42  0x0       
 #define                   TX_CH43  0x3f000000 /* Transmit Channel 43 */
 #define                 MUTE_CH43  0x80000000 /* Mute Channel 43 */
-#define                nMUTE_CH43  0x0       
 
 /* Bit masks for MXVR_ROUTING_11 */
 
 #define                   TX_CH44  0x3f       /* Transmit Channel 44 */
 #define                 MUTE_CH44  0x80       /* Mute Channel 44 */
-#define                nMUTE_CH44  0x0       
 #define                   TX_CH45  0x3f00     /* Transmit Channel 45 */
 #define                 MUTE_CH45  0x8000     /* Mute Channel 45 */
-#define                nMUTE_CH45  0x0       
 #define                   TX_CH46  0x3f0000   /* Transmit Channel 46 */
 #define                 MUTE_CH46  0x800000   /* Mute Channel 46 */
-#define                nMUTE_CH46  0x0       
 #define                   TX_CH47  0x3f000000 /* Transmit Channel 47 */
 #define                 MUTE_CH47  0x80000000 /* Mute Channel 47 */
-#define                nMUTE_CH47  0x0       
 
 /* Bit masks for MXVR_ROUTING_12 */
 
 #define                   TX_CH48  0x3f       /* Transmit Channel 48 */
 #define                 MUTE_CH48  0x80       /* Mute Channel 48 */
-#define                nMUTE_CH48  0x0       
 #define                   TX_CH49  0x3f00     /* Transmit Channel 49 */
 #define                 MUTE_CH49  0x8000     /* Mute Channel 49 */
-#define                nMUTE_CH49  0x0       
 #define                   TX_CH50  0x3f0000   /* Transmit Channel 50 */
 #define                 MUTE_CH50  0x800000   /* Mute Channel 50 */
-#define                nMUTE_CH50  0x0       
 #define                   TX_CH51  0x3f000000 /* Transmit Channel 51 */
 #define                 MUTE_CH51  0x80000000 /* Mute Channel 51 */
-#define                nMUTE_CH51  0x0       
 
 /* Bit masks for MXVR_ROUTING_13 */
 
 #define                   TX_CH52  0x3f       /* Transmit Channel 52 */
 #define                 MUTE_CH52  0x80       /* Mute Channel 52 */
-#define                nMUTE_CH52  0x0       
 #define                   TX_CH53  0x3f00     /* Transmit Channel 53 */
 #define                 MUTE_CH53  0x8000     /* Mute Channel 53 */
-#define                nMUTE_CH53  0x0       
 #define                   TX_CH54  0x3f0000   /* Transmit Channel 54 */
 #define                 MUTE_CH54  0x800000   /* Mute Channel 54 */
-#define                nMUTE_CH54  0x0       
 #define                   TX_CH55  0x3f000000 /* Transmit Channel 55 */
 #define                 MUTE_CH55  0x80000000 /* Mute Channel 55 */
-#define                nMUTE_CH55  0x0       
 
 /* Bit masks for MXVR_ROUTING_14 */
 
 #define                   TX_CH56  0x3f       /* Transmit Channel 56 */
 #define                 MUTE_CH56  0x80       /* Mute Channel 56 */
-#define                nMUTE_CH56  0x0       
 #define                   TX_CH57  0x3f00     /* Transmit Channel 57 */
 #define                 MUTE_CH57  0x8000     /* Mute Channel 57 */
-#define                nMUTE_CH57  0x0       
 #define                   TX_CH58  0x3f0000   /* Transmit Channel 58 */
 #define                 MUTE_CH58  0x800000   /* Mute Channel 58 */
-#define                nMUTE_CH58  0x0       
 #define                   TX_CH59  0x3f000000 /* Transmit Channel 59 */
 #define                 MUTE_CH59  0x80000000 /* Mute Channel 59 */
-#define                nMUTE_CH59  0x0       
 
 /* Bit masks for MXVR_BLOCK_CNT */
 
@@ -2416,53 +2006,37 @@
 /* Bit masks for MXVR_CLK_CTL */
 
 #define                  MXTALCEN  0x1        /* MXVR Crystal Oscillator Clock Enable */
-#define                 nMXTALCEN  0x0       
 #define                  MXTALFEN  0x2        /* MXVR Crystal Oscillator Feedback Enable */
-#define                 nMXTALFEN  0x0       
 #define                  MXTALMUL  0x30       /* MXVR Crystal Multiplier */
 #define                  CLKX3SEL  0x80       /* Clock Generation Source Select */
-#define                 nCLKX3SEL  0x0       
 #define                   MMCLKEN  0x100      /* Master Clock Enable */
-#define                  nMMCLKEN  0x0       
 #define                  MMCLKMUL  0x1e00     /* Master Clock Multiplication Factor */
 #define                   PLLSMPS  0xe000     /* MXVR PLL State Machine Prescaler */
 #define                   MBCLKEN  0x10000    /* Bit Clock Enable */
-#define                  nMBCLKEN  0x0       
 #define                  MBCLKDIV  0x1e0000   /* Bit Clock Divide Factor */
 #define                     INVRX  0x800000   /* Invert Receive Data */
-#define                    nINVRX  0x0       
 #define                     MFSEN  0x1000000  /* Frame Sync Enable */
-#define                    nMFSEN  0x0       
 #define                    MFSDIV  0x1e000000 /* Frame Sync Divide Factor */
 #define                    MFSSEL  0x60000000 /* Frame Sync Select */
 #define                   MFSSYNC  0x80000000 /* Frame Sync Synchronization Select */
-#define                  nMFSSYNC  0x0       
 
 /* Bit masks for MXVR_CDRPLL_CTL */
 
 #define                   CDRSMEN  0x1        /* MXVR CDRPLL State Machine Enable */
-#define                  nCDRSMEN  0x0       
 #define                   CDRRSTB  0x2        /* MXVR CDRPLL Reset */
-#define                  nCDRRSTB  0x0       
 #define                   CDRSVCO  0x4        /* MXVR CDRPLL Start VCO */
-#define                  nCDRSVCO  0x0       
 #define                   CDRMODE  0x8        /* MXVR CDRPLL CDR Mode Select */
-#define                  nCDRMODE  0x0       
 #define                   CDRSCNT  0x3f0      /* MXVR CDRPLL Start Counter */
 #define                   CDRLCNT  0xfc00     /* MXVR CDRPLL Lock Counter */
 #define                 CDRSHPSEL  0x3f0000   /* MXVR CDRPLL Shaper Select */
 #define                  CDRSHPEN  0x800000   /* MXVR CDRPLL Shaper Enable */
-#define                 nCDRSHPEN  0x0       
 #define                  CDRCPSEL  0xff000000 /* MXVR CDRPLL Charge Pump Current Select */
 
 /* Bit masks for MXVR_FMPLL_CTL */
 
 #define                    FMSMEN  0x1        /* MXVR FMPLL State Machine Enable */
-#define                   nFMSMEN  0x0       
 #define                    FMRSTB  0x2        /* MXVR FMPLL Reset */
-#define                   nFMRSTB  0x0       
 #define                    FMSVCO  0x4        /* MXVR FMPLL Start VCO */
-#define                   nFMSVCO  0x0       
 #define                    FMSCNT  0x3f0      /* MXVR FMPLL Start Counter */
 #define                    FMLCNT  0xfc00     /* MXVR FMPLL Lock Counter */
 #define                   FMCPSEL  0xff000000 /* MXVR FMPLL Charge Pump Current Select */
@@ -2470,15 +2044,10 @@
 /* Bit masks for MXVR_PIN_CTL */
 
 #define                  MTXONBOD  0x1        /* MTXONB Open Drain Select */
-#define                 nMTXONBOD  0x0       
 #define                   MTXONBG  0x2        /* MTXONB Gates MTX Select */
-#define                  nMTXONBG  0x0       
 #define                     MFSOE  0x10       /* MFS Output Enable */
-#define                    nMFSOE  0x0       
 #define                  MFSGPSEL  0x20       /* MFS General Purpose Output Select */
-#define                 nMFSGPSEL  0x0       
 #define                  MFSGPDAT  0x40       /* MFS General Purpose Output Data */
-#define                 nMFSGPDAT  0x0       
 
 /* Bit masks for MXVR_SCLK_CNT */
 
@@ -2487,7 +2056,6 @@
 /* Bit masks for KPAD_CTL */
 
 #define                   KPAD_EN  0x1        /* Keypad Enable */
-#define                  nKPAD_EN  0x0       
 #define              KPAD_IRQMODE  0x6        /* Key Press Interrupt Enable */
 #define                KPAD_ROWEN  0x1c00     /* Row Enable Width */
 #define                KPAD_COLEN  0xe000     /* Column Enable Width */
@@ -2509,29 +2077,21 @@
 /* Bit masks for KPAD_STAT */
 
 #define                  KPAD_IRQ  0x1        /* Keypad Interrupt Status */
-#define                 nKPAD_IRQ  0x0       
 #define              KPAD_MROWCOL  0x6        /* Multiple Row/Column Keypress Status */
 #define              KPAD_PRESSED  0x8        /* Key press current status */
-#define             nKPAD_PRESSED  0x0       
 
 /* Bit masks for KPAD_SOFTEVAL */
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
-#define          nKPAD_SOFTEVAL_E  0x0       
 
 /* Bit masks for SDH_COMMAND */
 
 #define                   CMD_IDX  0x3f       /* Command Index */
 #define                   CMD_RSP  0x40       /* Response */
-#define                  nCMD_RSP  0x0       
 #define                 CMD_L_RSP  0x80       /* Long Response */
-#define                nCMD_L_RSP  0x0       
 #define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                nCMD_INT_E  0x0       
 #define                CMD_PEND_E  0x200      /* Command Pending */
-#define               nCMD_PEND_E  0x0       
 #define                     CMD_E  0x400      /* Command Enable */
-#define                    nCMD_E  0x0       
 
 /* Bit masks for SDH_PWR_CTL */
 
@@ -2540,21 +2100,15 @@
 #define                       TBD  0x3c       /* TBD */
 #endif
 #define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                nSD_CMD_OD  0x0       
 #define                   ROD_CTL  0x80       /* Rod Control */
-#define                  nROD_CTL  0x0       
 
 /* Bit masks for SDH_CLK_CTL */
 
 #define                    CLKDIV  0xff       /* MC_CLK Divisor */
 #define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                    nCLK_E  0x0       
 #define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define                 nPWR_SV_E  0x0       
 #define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define            nCLKDIV_BYPASS  0x0       
 #define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-#define                 nWIDE_BUS  0x0       
 
 /* Bit masks for SDH_RESP_CMD */
 
@@ -2563,133 +2117,74 @@
 /* Bit masks for SDH_DATA_CTL */
 
 #define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                    nDTX_E  0x0       
 #define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  nDTX_DIR  0x0       
 #define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 nDTX_MODE  0x0       
 #define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define                nDTX_DMA_E  0x0       
 #define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
 
 /* Bit masks for SDH_STATUS */
 
 #define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define             nCMD_CRC_FAIL  0x0       
 #define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define             nDAT_CRC_FAIL  0x0       
-#define               CMD_TIMEOUT  0x4        /* CMD Time Out */
-#define              nCMD_TIMEOUT  0x0       
-#define               DAT_TIMEOUT  0x8        /* Data Time Out */
-#define              nDAT_TIMEOUT  0x0       
+#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
+#define               DAT_TIME_OUT  0x8        /* Data Time Out */
 #define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define              nTX_UNDERRUN  0x0       
 #define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define               nRX_OVERRUN  0x0       
 #define              CMD_RESP_END  0x40       /* CMD Response End */
-#define             nCMD_RESP_END  0x0       
 #define                  CMD_SENT  0x80       /* CMD Sent */
-#define                 nCMD_SENT  0x0       
 #define                   DAT_END  0x100      /* Data End */
-#define                  nDAT_END  0x0       
 #define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define            nSTART_BIT_ERR  0x0       
 #define               DAT_BLK_END  0x400      /* Data Block End */
-#define              nDAT_BLK_END  0x0       
 #define                   CMD_ACT  0x800      /* CMD Active */
-#define                  nCMD_ACT  0x0       
 #define                    TX_ACT  0x1000     /* Transmit Active */
-#define                   nTX_ACT  0x0       
 #define                    RX_ACT  0x2000     /* Receive Active */
-#define                   nRX_ACT  0x0       
 #define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define             nTX_FIFO_STAT  0x0       
 #define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define             nRX_FIFO_STAT  0x0       
 #define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define             nTX_FIFO_FULL  0x0       
 #define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define             nRX_FIFO_FULL  0x0       
 #define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define             nTX_FIFO_ZERO  0x0       
 #define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define              nRX_DAT_ZERO  0x0       
 #define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               nTX_DAT_RDY  0x0       
 #define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-#define              nRX_FIFO_RDY  0x0       
 
 /* Bit masks for SDH_STATUS_CLR */
 
 #define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define        nCMD_CRC_FAIL_STAT  0x0       
 #define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define        nDAT_CRC_FAIL_STAT  0x0       
 #define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define         nCMD_TIMEOUT_STAT  0x0       
 #define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define         nDAT_TIMEOUT_STAT  0x0       
 #define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define         nTX_UNDERRUN_STAT  0x0       
 #define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define          nRX_OVERRUN_STAT  0x0       
 #define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define        nCMD_RESP_END_STAT  0x0       
 #define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define            nCMD_SENT_STAT  0x0       
 #define              DAT_END_STAT  0x100      /* Data End Status */
-#define             nDAT_END_STAT  0x0       
 #define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define       nSTART_BIT_ERR_STAT  0x0       
 #define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-#define         nDAT_BLK_END_STAT  0x0       
 
 /* Bit masks for SDH_MASK0 */
 
 #define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define        nCMD_CRC_FAIL_MASK  0x0       
 #define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define        nDAT_CRC_FAIL_MASK  0x0       
 #define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define         nCMD_TIMEOUT_MASK  0x0       
 #define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define         nDAT_TIMEOUT_MASK  0x0       
 #define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define         nTX_UNDERRUN_MASK  0x0       
 #define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define          nRX_OVERRUN_MASK  0x0       
 #define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define        nCMD_RESP_END_MASK  0x0       
 #define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define            nCMD_SENT_MASK  0x0       
 #define              DAT_END_MASK  0x100      /* Data End Mask */
-#define             nDAT_END_MASK  0x0       
 #define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define       nSTART_BIT_ERR_MASK  0x0       
 #define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define         nDAT_BLK_END_MASK  0x0       
 #define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define             nCMD_ACT_MASK  0x0       
 #define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define              nTX_ACT_MASK  0x0       
 #define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define              nRX_ACT_MASK  0x0       
 #define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define        nTX_FIFO_STAT_MASK  0x0       
 #define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define        nRX_FIFO_STAT_MASK  0x0       
 #define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define        nTX_FIFO_FULL_MASK  0x0       
 #define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define        nRX_FIFO_FULL_MASK  0x0       
 #define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define        nTX_FIFO_ZERO_MASK  0x0       
 #define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define         nRX_DAT_ZERO_MASK  0x0       
 #define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          nTX_DAT_RDY_MASK  0x0       
 #define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-#define         nRX_FIFO_RDY_MASK  0x0       
 
 /* Bit masks for SDH_FIFO_CNT */
 
@@ -2698,73 +2193,47 @@
 /* Bit masks for SDH_E_STATUS */
 
 #define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define             nSDIO_INT_DET  0x0       
 #define               SD_CARD_DET  0x10       /* SD Card Detect */
-#define              nSD_CARD_DET  0x0       
 
 /* Bit masks for SDH_E_MASK */
 
 #define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                 nSDIO_MSK  0x0       
 #define                   SCD_MSK  0x40       /* Mask Card Detect */
-#define                  nSCD_MSK  0x0       
 
 /* Bit masks for SDH_CFG */
 
 #define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                  nCLKS_EN  0x0       
 #define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                     nSD4E  0x0       
 #define                       MWE  0x8        /* Moving Window Enable */
-#define                      nMWE  0x0       
 #define                    SD_RST  0x10       /* SDMMC Reset */
-#define                   nSD_RST  0x0       
 #define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                nPUP_SDDAT  0x0       
 #define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define               nPUP_SDDAT3  0x0       
 #define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-#define                nPD_SDDAT3  0x0       
 
 /* Bit masks for SDH_RD_WAIT_EN */
 
 #define                       RWR  0x1        /* Read Wait Request */
-#define                      nRWR  0x0       
 
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */
-#define                nPIO_START  0x0       
 #define               MULTI_START  0x2        /* Start Multi-DMA Op */
-#define              nMULTI_START  0x0       
 #define               ULTRA_START  0x4        /* Start Ultra-DMA Op */
-#define              nULTRA_START  0x0       
 #define                  XFER_DIR  0x8        /* Transfer Direction */
-#define                 nXFER_DIR  0x0       
 #define                  IORDY_EN  0x10       /* IORDY Enable */
-#define                 nIORDY_EN  0x0       
 #define                FIFO_FLUSH  0x20       /* Flush FIFOs */
-#define               nFIFO_FLUSH  0x0       
 #define                  SOFT_RST  0x40       /* Soft Reset */
-#define                 nSOFT_RST  0x0       
 #define                   DEV_RST  0x80       /* Device Reset */
-#define                  nDEV_RST  0x0       
 #define                TFRCNT_RST  0x100      /* Trans Count Reset */
-#define               nTFRCNT_RST  0x0       
 #define               END_ON_TERM  0x200      /* End/Terminate Select */
-#define              nEND_ON_TERM  0x0       
 #define               PIO_USE_DMA  0x400      /* PIO-DMA Enable */
-#define              nPIO_USE_DMA  0x0       
 #define          UDMAIN_FIFO_THRS  0xf000     /* Ultra DMA-IN FIFO Threshold */
 
 /* Bit masks for ATAPI_STATUS */
 
 #define               PIO_XFER_ON  0x1        /* PIO transfer in progress */
-#define              nPIO_XFER_ON  0x0       
 #define             MULTI_XFER_ON  0x2        /* Multi-word DMA transfer in progress */
-#define            nMULTI_XFER_ON  0x0       
 #define             ULTRA_XFER_ON  0x4        /* Ultra DMA transfer in progress */
-#define            nULTRA_XFER_ON  0x0       
 #define               ULTRA_IN_FL  0xf0       /* Ultra DMA Input FIFO Level */
 
 /* Bit masks for ATAPI_DEV_ADDR */
@@ -2774,66 +2243,39 @@
 /* Bit masks for ATAPI_INT_MASK */
 
 #define        ATAPI_DEV_INT_MASK  0x1        /* Device interrupt mask */
-#define       nATAPI_DEV_INT_MASK  0x0       
 #define             PIO_DONE_MASK  0x2        /* PIO transfer done interrupt mask */
-#define            nPIO_DONE_MASK  0x0       
 #define           MULTI_DONE_MASK  0x4        /* Multi-DMA transfer done interrupt mask */
-#define          nMULTI_DONE_MASK  0x0       
 #define          UDMAIN_DONE_MASK  0x8        /* Ultra-DMA in transfer done interrupt mask */
-#define         nUDMAIN_DONE_MASK  0x0       
 #define         UDMAOUT_DONE_MASK  0x10       /* Ultra-DMA out transfer done interrupt mask */
-#define        nUDMAOUT_DONE_MASK  0x0       
 #define       HOST_TERM_XFER_MASK  0x20       /* Host terminate current transfer interrupt mask */
-#define      nHOST_TERM_XFER_MASK  0x0       
 #define           MULTI_TERM_MASK  0x40       /* Device terminate Multi-DMA transfer interrupt mask */
-#define          nMULTI_TERM_MASK  0x0       
 #define          UDMAIN_TERM_MASK  0x80       /* Device terminate Ultra-DMA-in transfer interrupt mask */
-#define         nUDMAIN_TERM_MASK  0x0       
 #define         UDMAOUT_TERM_MASK  0x100      /* Device terminate Ultra-DMA-out transfer interrupt mask */
-#define        nUDMAOUT_TERM_MASK  0x0       
 
 /* Bit masks for ATAPI_INT_STATUS */
 
 #define             ATAPI_DEV_INT  0x1        /* Device interrupt status */
-#define            nATAPI_DEV_INT  0x0       
 #define              PIO_DONE_INT  0x2        /* PIO transfer done interrupt status */
-#define             nPIO_DONE_INT  0x0       
 #define            MULTI_DONE_INT  0x4        /* Multi-DMA transfer done interrupt status */
-#define           nMULTI_DONE_INT  0x0       
 #define           UDMAIN_DONE_INT  0x8        /* Ultra-DMA in transfer done interrupt status */
-#define          nUDMAIN_DONE_INT  0x0       
 #define          UDMAOUT_DONE_INT  0x10       /* Ultra-DMA out transfer done interrupt status */
-#define         nUDMAOUT_DONE_INT  0x0       
 #define        HOST_TERM_XFER_INT  0x20       /* Host terminate current transfer interrupt status */
-#define       nHOST_TERM_XFER_INT  0x0       
 #define            MULTI_TERM_INT  0x40       /* Device terminate Multi-DMA transfer interrupt status */
-#define           nMULTI_TERM_INT  0x0       
 #define           UDMAIN_TERM_INT  0x80       /* Device terminate Ultra-DMA-in transfer interrupt status */
-#define          nUDMAIN_TERM_INT  0x0       
 #define          UDMAOUT_TERM_INT  0x100      /* Device terminate Ultra-DMA-out transfer interrupt status */
-#define         nUDMAOUT_TERM_INT  0x0       
 
 /* Bit masks for ATAPI_LINE_STATUS */
 
 #define                ATAPI_INTR  0x1        /* Device interrupt to host line status */
-#define               nATAPI_INTR  0x0       
 #define                ATAPI_DASP  0x2        /* Device dasp to host line status */
-#define               nATAPI_DASP  0x0       
 #define                ATAPI_CS0N  0x4        /* ATAPI chip select 0 line status */
-#define               nATAPI_CS0N  0x0       
 #define                ATAPI_CS1N  0x8        /* ATAPI chip select 1 line status */
-#define               nATAPI_CS1N  0x0       
 #define                ATAPI_ADDR  0x70       /* ATAPI address line status */
 #define              ATAPI_DMAREQ  0x80       /* ATAPI DMA request line status */
-#define             nATAPI_DMAREQ  0x0       
 #define             ATAPI_DMAACKN  0x100      /* ATAPI DMA acknowledge line status */
-#define            nATAPI_DMAACKN  0x0       
 #define               ATAPI_DIOWN  0x200      /* ATAPI write line status */
-#define              nATAPI_DIOWN  0x0       
 #define               ATAPI_DIORN  0x400      /* ATAPI read line status */
-#define              nATAPI_DIORN  0x0       
 #define               ATAPI_IORDY  0x800      /* ATAPI IORDY line status */
-#define              nATAPI_IORDY  0x0       
 
 /* Bit masks for ATAPI_SM_STATE */
 
@@ -2845,7 +2287,6 @@
 /* Bit masks for ATAPI_TERMINATE */
 
 #define           ATAPI_HOST_TERM  0x1        /* Host terminationation */
-#define          nATAPI_HOST_TERM  0x0       
 
 /* Bit masks for ATAPI_REG_TIM_0 */
 
@@ -2900,41 +2341,26 @@
 /* Bit masks for TIMER_ENABLE1 */
 
 #define                    TIMEN8  0x1        /* Timer 8 Enable */
-#define                   nTIMEN8  0x0       
 #define                    TIMEN9  0x2        /* Timer 9 Enable */
-#define                   nTIMEN9  0x0       
 #define                   TIMEN10  0x4        /* Timer 10 Enable */
-#define                  nTIMEN10  0x0       
 
 /* Bit masks for TIMER_DISABLE1 */
 
 #define                   TIMDIS8  0x1        /* Timer 8 Disable */
-#define                  nTIMDIS8  0x0       
 #define                   TIMDIS9  0x2        /* Timer 9 Disable */
-#define                  nTIMDIS9  0x0       
 #define                  TIMDIS10  0x4        /* Timer 10 Disable */
-#define                 nTIMDIS10  0x0       
 
 /* Bit masks for TIMER_STATUS1 */
 
 #define                    TIMIL8  0x1        /* Timer 8 Interrupt */
-#define                   nTIMIL8  0x0       
 #define                    TIMIL9  0x2        /* Timer 9 Interrupt */
-#define                   nTIMIL9  0x0       
 #define                   TIMIL10  0x4        /* Timer 10 Interrupt */
-#define                  nTIMIL10  0x0       
 #define                 TOVF_ERR8  0x10       /* Timer 8 Counter Overflow */
-#define                nTOVF_ERR8  0x0       
 #define                 TOVF_ERR9  0x20       /* Timer 9 Counter Overflow */
-#define                nTOVF_ERR9  0x0       
 #define                TOVF_ERR10  0x40       /* Timer 10 Counter Overflow */
-#define               nTOVF_ERR10  0x0       
 #define                     TRUN8  0x1000     /* Timer 8 Slave Enable Status */
-#define                    nTRUN8  0x0       
 #define                     TRUN9  0x2000     /* Timer 9 Slave Enable Status */
-#define                    nTRUN9  0x0       
 #define                    TRUN10  0x4000     /* Timer 10 Slave Enable Status */
-#define                   nTRUN10  0x0       
 
 /* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
 
@@ -2945,131 +2371,77 @@
 /* Bit masks for USB_POWER */
 
 #define           ENABLE_SUSPENDM  0x1        /* enable SuspendM output */
-#define          nENABLE_SUSPENDM  0x0       
 #define              SUSPEND_MODE  0x2        /* Suspend Mode indicator */
-#define             nSUSPEND_MODE  0x0       
 #define               RESUME_MODE  0x4        /* DMA Mode */
-#define              nRESUME_MODE  0x0       
 #define                     RESET  0x8        /* Reset indicator */
-#define                    nRESET  0x0       
 #define                   HS_MODE  0x10       /* High Speed mode indicator */
-#define                  nHS_MODE  0x0       
 #define                 HS_ENABLE  0x20       /* high Speed Enable */
-#define                nHS_ENABLE  0x0       
 #define                 SOFT_CONN  0x40       /* Soft connect */
-#define                nSOFT_CONN  0x0       
 #define                ISO_UPDATE  0x80       /* Isochronous update */
-#define               nISO_UPDATE  0x0       
 
 /* Bit masks for USB_INTRTX */
 
 #define                    EP0_TX  0x1        /* Tx Endpoint 0 interrupt */
-#define                   nEP0_TX  0x0       
 #define                    EP1_TX  0x2        /* Tx Endpoint 1 interrupt */
-#define                   nEP1_TX  0x0       
 #define                    EP2_TX  0x4        /* Tx Endpoint 2 interrupt */
-#define                   nEP2_TX  0x0       
 #define                    EP3_TX  0x8        /* Tx Endpoint 3 interrupt */
-#define                   nEP3_TX  0x0       
 #define                    EP4_TX  0x10       /* Tx Endpoint 4 interrupt */
-#define                   nEP4_TX  0x0       
 #define                    EP5_TX  0x20       /* Tx Endpoint 5 interrupt */
-#define                   nEP5_TX  0x0       
 #define                    EP6_TX  0x40       /* Tx Endpoint 6 interrupt */
-#define                   nEP6_TX  0x0       
 #define                    EP7_TX  0x80       /* Tx Endpoint 7 interrupt */
-#define                   nEP7_TX  0x0       
 
 /* Bit masks for USB_INTRRX */
 
 #define                    EP1_RX  0x2        /* Rx Endpoint 1 interrupt */
-#define                   nEP1_RX  0x0       
 #define                    EP2_RX  0x4        /* Rx Endpoint 2 interrupt */
-#define                   nEP2_RX  0x0       
 #define                    EP3_RX  0x8        /* Rx Endpoint 3 interrupt */
-#define                   nEP3_RX  0x0       
 #define                    EP4_RX  0x10       /* Rx Endpoint 4 interrupt */
-#define                   nEP4_RX  0x0       
 #define                    EP5_RX  0x20       /* Rx Endpoint 5 interrupt */
-#define                   nEP5_RX  0x0       
 #define                    EP6_RX  0x40       /* Rx Endpoint 6 interrupt */
-#define                   nEP6_RX  0x0       
 #define                    EP7_RX  0x80       /* Rx Endpoint 7 interrupt */
-#define                   nEP7_RX  0x0       
 
 /* Bit masks for USB_INTRTXE */
 
 #define                  EP0_TX_E  0x1        /* Endpoint 0 interrupt Enable */
-#define                 nEP0_TX_E  0x0       
 #define                  EP1_TX_E  0x2        /* Tx Endpoint 1 interrupt  Enable */
-#define                 nEP1_TX_E  0x0       
 #define                  EP2_TX_E  0x4        /* Tx Endpoint 2 interrupt  Enable */
-#define                 nEP2_TX_E  0x0       
 #define                  EP3_TX_E  0x8        /* Tx Endpoint 3 interrupt  Enable */
-#define                 nEP3_TX_E  0x0       
 #define                  EP4_TX_E  0x10       /* Tx Endpoint 4 interrupt  Enable */
-#define                 nEP4_TX_E  0x0       
 #define                  EP5_TX_E  0x20       /* Tx Endpoint 5 interrupt  Enable */
-#define                 nEP5_TX_E  0x0       
 #define                  EP6_TX_E  0x40       /* Tx Endpoint 6 interrupt  Enable */
-#define                 nEP6_TX_E  0x0       
 #define                  EP7_TX_E  0x80       /* Tx Endpoint 7 interrupt  Enable */
-#define                 nEP7_TX_E  0x0       
 
 /* Bit masks for USB_INTRRXE */
 
 #define                  EP1_RX_E  0x2        /* Rx Endpoint 1 interrupt  Enable */
-#define                 nEP1_RX_E  0x0       
 #define                  EP2_RX_E  0x4        /* Rx Endpoint 2 interrupt  Enable */
-#define                 nEP2_RX_E  0x0       
 #define                  EP3_RX_E  0x8        /* Rx Endpoint 3 interrupt  Enable */
-#define                 nEP3_RX_E  0x0       
 #define                  EP4_RX_E  0x10       /* Rx Endpoint 4 interrupt  Enable */
-#define                 nEP4_RX_E  0x0       
 #define                  EP5_RX_E  0x20       /* Rx Endpoint 5 interrupt  Enable */
-#define                 nEP5_RX_E  0x0       
 #define                  EP6_RX_E  0x40       /* Rx Endpoint 6 interrupt  Enable */
-#define                 nEP6_RX_E  0x0       
 #define                  EP7_RX_E  0x80       /* Rx Endpoint 7 interrupt  Enable */
-#define                 nEP7_RX_E  0x0       
 
 /* Bit masks for USB_INTRUSB */
 
 #define                 SUSPEND_B  0x1        /* Suspend indicator */
-#define                nSUSPEND_B  0x0       
 #define                  RESUME_B  0x2        /* Resume indicator */
-#define                 nRESUME_B  0x0       
 #define          RESET_OR_BABLE_B  0x4        /* Reset/babble indicator */
-#define         nRESET_OR_BABLE_B  0x0       
 #define                     SOF_B  0x8        /* Start of frame */
-#define                    nSOF_B  0x0       
 #define                    CONN_B  0x10       /* Connection indicator */
-#define                   nCONN_B  0x0       
 #define                  DISCON_B  0x20       /* Disconnect indicator */
-#define                 nDISCON_B  0x0       
 #define             SESSION_REQ_B  0x40       /* Session Request */
-#define            nSESSION_REQ_B  0x0       
 #define              VBUS_ERROR_B  0x80       /* Vbus threshold indicator */
-#define             nVBUS_ERROR_B  0x0       
 
 /* Bit masks for USB_INTRUSBE */
 
 #define                SUSPEND_BE  0x1        /* Suspend indicator int enable */
-#define               nSUSPEND_BE  0x0       
 #define                 RESUME_BE  0x2        /* Resume indicator int enable */
-#define                nRESUME_BE  0x0       
 #define         RESET_OR_BABLE_BE  0x4        /* Reset/babble indicator int enable */
-#define        nRESET_OR_BABLE_BE  0x0       
 #define                    SOF_BE  0x8        /* Start of frame int enable */
-#define                   nSOF_BE  0x0       
 #define                   CONN_BE  0x10       /* Connection indicator int enable */
-#define                  nCONN_BE  0x0       
 #define                 DISCON_BE  0x20       /* Disconnect indicator int enable */
-#define                nDISCON_BE  0x0       
 #define            SESSION_REQ_BE  0x40       /* Session Request int enable */
-#define           nSESSION_REQ_BE  0x0       
 #define             VBUS_ERROR_BE  0x80       /* Vbus threshold indicator int enable */
-#define            nVBUS_ERROR_BE  0x0       
 
 /* Bit masks for USB_FRAME */
 
@@ -3082,117 +2454,67 @@
 /* Bit masks for USB_GLOBAL_CTL */
 
 #define                GLOBAL_ENA  0x1        /* enables USB module */
-#define               nGLOBAL_ENA  0x0       
 #define                EP1_TX_ENA  0x2        /* Transmit endpoint 1 enable */
-#define               nEP1_TX_ENA  0x0       
 #define                EP2_TX_ENA  0x4        /* Transmit endpoint 2 enable */
-#define               nEP2_TX_ENA  0x0       
 #define                EP3_TX_ENA  0x8        /* Transmit endpoint 3 enable */
-#define               nEP3_TX_ENA  0x0       
 #define                EP4_TX_ENA  0x10       /* Transmit endpoint 4 enable */
-#define               nEP4_TX_ENA  0x0       
 #define                EP5_TX_ENA  0x20       /* Transmit endpoint 5 enable */
-#define               nEP5_TX_ENA  0x0       
 #define                EP6_TX_ENA  0x40       /* Transmit endpoint 6 enable */
-#define               nEP6_TX_ENA  0x0       
 #define                EP7_TX_ENA  0x80       /* Transmit endpoint 7 enable */
-#define               nEP7_TX_ENA  0x0       
 #define                EP1_RX_ENA  0x100      /* Receive endpoint 1 enable */
-#define               nEP1_RX_ENA  0x0       
 #define                EP2_RX_ENA  0x200      /* Receive endpoint 2 enable */
-#define               nEP2_RX_ENA  0x0       
 #define                EP3_RX_ENA  0x400      /* Receive endpoint 3 enable */
-#define               nEP3_RX_ENA  0x0       
 #define                EP4_RX_ENA  0x800      /* Receive endpoint 4 enable */
-#define               nEP4_RX_ENA  0x0       
 #define                EP5_RX_ENA  0x1000     /* Receive endpoint 5 enable */
-#define               nEP5_RX_ENA  0x0       
 #define                EP6_RX_ENA  0x2000     /* Receive endpoint 6 enable */
-#define               nEP6_RX_ENA  0x0       
 #define                EP7_RX_ENA  0x4000     /* Receive endpoint 7 enable */
-#define               nEP7_RX_ENA  0x0       
 
 /* Bit masks for USB_OTG_DEV_CTL */
 
 #define                   SESSION  0x1        /* session indicator */
-#define                  nSESSION  0x0       
 #define                  HOST_REQ  0x2        /* Host negotiation request */
-#define                 nHOST_REQ  0x0       
 #define                 HOST_MODE  0x4        /* indicates USBDRC is a host */
-#define                nHOST_MODE  0x0       
 #define                     VBUS0  0x8        /* Vbus level indicator[0] */
-#define                    nVBUS0  0x0       
 #define                     VBUS1  0x10       /* Vbus level indicator[1] */
-#define                    nVBUS1  0x0       
 #define                     LSDEV  0x20       /* Low-speed indicator */
-#define                    nLSDEV  0x0       
 #define                     FSDEV  0x40       /* Full or High-speed indicator */
-#define                    nFSDEV  0x0       
 #define                  B_DEVICE  0x80       /* A' or 'B' device indicator */
-#define                 nB_DEVICE  0x0       
 
 /* Bit masks for USB_OTG_VBUS_IRQ */
 
 #define             DRIVE_VBUS_ON  0x1        /* indicator to drive VBUS control circuit */
-#define            nDRIVE_VBUS_ON  0x0       
 #define            DRIVE_VBUS_OFF  0x2        /* indicator to shut off charge pump */
-#define           nDRIVE_VBUS_OFF  0x0       
 #define           CHRG_VBUS_START  0x4        /* indicator for external circuit to start charging VBUS */
-#define          nCHRG_VBUS_START  0x0       
 #define             CHRG_VBUS_END  0x8        /* indicator for external circuit to end charging VBUS */
-#define            nCHRG_VBUS_END  0x0       
 #define        DISCHRG_VBUS_START  0x10       /* indicator to start discharging VBUS */
-#define       nDISCHRG_VBUS_START  0x0       
 #define          DISCHRG_VBUS_END  0x20       /* indicator to stop discharging VBUS */
-#define         nDISCHRG_VBUS_END  0x0       
 
 /* Bit masks for USB_OTG_VBUS_MASK */
 
 #define         DRIVE_VBUS_ON_ENA  0x1        /* enable DRIVE_VBUS_ON interrupt */
-#define        nDRIVE_VBUS_ON_ENA  0x0       
 #define        DRIVE_VBUS_OFF_ENA  0x2        /* enable DRIVE_VBUS_OFF interrupt */
-#define       nDRIVE_VBUS_OFF_ENA  0x0       
 #define       CHRG_VBUS_START_ENA  0x4        /* enable CHRG_VBUS_START interrupt */
-#define      nCHRG_VBUS_START_ENA  0x0       
 #define         CHRG_VBUS_END_ENA  0x8        /* enable CHRG_VBUS_END interrupt */
-#define        nCHRG_VBUS_END_ENA  0x0       
 #define    DISCHRG_VBUS_START_ENA  0x10       /* enable DISCHRG_VBUS_START interrupt */
-#define   nDISCHRG_VBUS_START_ENA  0x0       
 #define      DISCHRG_VBUS_END_ENA  0x20       /* enable DISCHRG_VBUS_END interrupt */
-#define     nDISCHRG_VBUS_END_ENA  0x0       
 
 /* Bit masks for USB_CSR0 */
 
 #define                  RXPKTRDY  0x1        /* data packet receive indicator */
-#define                 nRXPKTRDY  0x0       
 #define                  TXPKTRDY  0x2        /* data packet in FIFO indicator */
-#define                 nTXPKTRDY  0x0       
 #define                STALL_SENT  0x4        /* STALL handshake sent */
-#define               nSTALL_SENT  0x0       
 #define                   DATAEND  0x8        /* Data end indicator */
-#define                  nDATAEND  0x0       
 #define                  SETUPEND  0x10       /* Setup end */
-#define                 nSETUPEND  0x0       
 #define                 SENDSTALL  0x20       /* Send STALL handshake */
-#define                nSENDSTALL  0x0       
 #define         SERVICED_RXPKTRDY  0x40       /* used to clear the RxPktRdy bit */
-#define        nSERVICED_RXPKTRDY  0x0       
 #define         SERVICED_SETUPEND  0x80       /* used to clear the SetupEnd bit */
-#define        nSERVICED_SETUPEND  0x0       
 #define                 FLUSHFIFO  0x100      /* flush endpoint FIFO */
-#define                nFLUSHFIFO  0x0       
 #define          STALL_RECEIVED_H  0x4        /* STALL handshake received host mode */
-#define         nSTALL_RECEIVED_H  0x0       
 #define                SETUPPKT_H  0x8        /* send Setup token host mode */
-#define               nSETUPPKT_H  0x0       
 #define                   ERROR_H  0x10       /* timeout error indicator host mode */
-#define                  nERROR_H  0x0       
 #define                  REQPKT_H  0x20       /* Request an IN transaction host mode */
-#define                 nREQPKT_H  0x0       
 #define               STATUSPKT_H  0x40       /* Status stage transaction host mode */
-#define              nSTATUSPKT_H  0x0       
 #define             NAK_TIMEOUT_H  0x80       /* EP0 halted after a NAK host mode */
-#define            nNAK_TIMEOUT_H  0x0       
 
 /* Bit masks for USB_COUNT0 */
 
@@ -3213,37 +2535,21 @@
 /* Bit masks for USB_TXCSR */
 
 #define                TXPKTRDY_T  0x1        /* data packet in FIFO indicator */
-#define               nTXPKTRDY_T  0x0       
 #define          FIFO_NOT_EMPTY_T  0x2        /* FIFO not empty */
-#define         nFIFO_NOT_EMPTY_T  0x0       
 #define                UNDERRUN_T  0x4        /* TxPktRdy not set  for an IN token */
-#define               nUNDERRUN_T  0x0       
 #define               FLUSHFIFO_T  0x8        /* flush endpoint FIFO */
-#define              nFLUSHFIFO_T  0x0       
 #define              STALL_SEND_T  0x10       /* issue a Stall handshake */
-#define             nSTALL_SEND_T  0x0       
 #define              STALL_SENT_T  0x20       /* Stall handshake transmitted */
-#define             nSTALL_SENT_T  0x0       
 #define        CLEAR_DATATOGGLE_T  0x40       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_T  0x0       
 #define                INCOMPTX_T  0x80       /* indicates that a large packet is split */
-#define               nINCOMPTX_T  0x0       
 #define              DMAREQMODE_T  0x400      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_T  0x0       
 #define        FORCE_DATATOGGLE_T  0x800      /* Force data toggle */
-#define       nFORCE_DATATOGGLE_T  0x0       
 #define              DMAREQ_ENA_T  0x1000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_T  0x0       
 #define                     ISO_T  0x4000     /* enable Isochronous transfers */
-#define                    nISO_T  0x0       
 #define                 AUTOSET_T  0x8000     /* allows TxPktRdy to be set automatically */
-#define                nAUTOSET_T  0x0       
 #define                  ERROR_TH  0x4        /* error condition host mode */
-#define                 nERROR_TH  0x0       
 #define         STALL_RECEIVED_TH  0x20       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_TH  0x0       
 #define            NAK_TIMEOUT_TH  0x80       /* NAK timeout host mode */
-#define           nNAK_TIMEOUT_TH  0x0       
 
 /* Bit masks for USB_TXCOUNT */
 
@@ -3252,45 +2558,25 @@
 /* Bit masks for USB_RXCSR */
 
 #define                RXPKTRDY_R  0x1        /* data packet in FIFO indicator */
-#define               nRXPKTRDY_R  0x0       
 #define               FIFO_FULL_R  0x2        /* FIFO not empty */
-#define              nFIFO_FULL_R  0x0       
 #define                 OVERRUN_R  0x4        /* TxPktRdy not set  for an IN token */
-#define                nOVERRUN_R  0x0       
 #define               DATAERROR_R  0x8        /* Out packet cannot be loaded into Rx  FIFO */
-#define              nDATAERROR_R  0x0       
 #define               FLUSHFIFO_R  0x10       /* flush endpoint FIFO */
-#define              nFLUSHFIFO_R  0x0       
 #define              STALL_SEND_R  0x20       /* issue a Stall handshake */
-#define             nSTALL_SEND_R  0x0       
 #define              STALL_SENT_R  0x40       /* Stall handshake transmitted */
-#define             nSTALL_SENT_R  0x0       
 #define        CLEAR_DATATOGGLE_R  0x80       /* clear endpoint data toggle */
-#define       nCLEAR_DATATOGGLE_R  0x0       
 #define                INCOMPRX_R  0x100      /* indicates that a large packet is split */
-#define               nINCOMPRX_R  0x0       
 #define              DMAREQMODE_R  0x800      /* DMA mode (0 or 1) selection */
-#define             nDMAREQMODE_R  0x0       
 #define                 DISNYET_R  0x1000     /* disable Nyet handshakes */
-#define                nDISNYET_R  0x0       
 #define              DMAREQ_ENA_R  0x2000     /* Enable DMA request for Tx EP */
-#define             nDMAREQ_ENA_R  0x0       
 #define                     ISO_R  0x4000     /* enable Isochronous transfers */
-#define                    nISO_R  0x0       
 #define               AUTOCLEAR_R  0x8000     /* allows TxPktRdy to be set automatically */
-#define              nAUTOCLEAR_R  0x0       
 #define                  ERROR_RH  0x4        /* TxPktRdy not set  for an IN token host mode */
-#define                 nERROR_RH  0x0       
 #define                 REQPKT_RH  0x20       /* request an IN transaction host mode */
-#define                nREQPKT_RH  0x0       
 #define         STALL_RECEIVED_RH  0x40       /* Stall handshake received host mode */
-#define        nSTALL_RECEIVED_RH  0x0       
 #define               INCOMPRX_RH  0x100      /* indicates that a large packet is split host mode */
-#define              nINCOMPRX_RH  0x0       
 #define             DMAREQMODE_RH  0x800      /* DMA mode (0 or 1) selection host mode */
-#define            nDMAREQMODE_RH  0x0       
 #define                AUTOREQ_RH  0x4000     /* sets ReqPkt automatically host mode */
-#define               nAUTOREQ_RH  0x0       
 
 /* Bit masks for USB_RXCOUNT */
 
@@ -3317,35 +2603,22 @@
 /* Bit masks for USB_DMA_INTERRUPT */
 
 #define                  DMA0_INT  0x1        /* DMA0 pending interrupt */
-#define                 nDMA0_INT  0x0       
 #define                  DMA1_INT  0x2        /* DMA1 pending interrupt */
-#define                 nDMA1_INT  0x0       
 #define                  DMA2_INT  0x4        /* DMA2 pending interrupt */
-#define                 nDMA2_INT  0x0       
 #define                  DMA3_INT  0x8        /* DMA3 pending interrupt */
-#define                 nDMA3_INT  0x0       
 #define                  DMA4_INT  0x10       /* DMA4 pending interrupt */
-#define                 nDMA4_INT  0x0       
 #define                  DMA5_INT  0x20       /* DMA5 pending interrupt */
-#define                 nDMA5_INT  0x0       
 #define                  DMA6_INT  0x40       /* DMA6 pending interrupt */
-#define                 nDMA6_INT  0x0       
 #define                  DMA7_INT  0x80       /* DMA7 pending interrupt */
-#define                 nDMA7_INT  0x0       
 
 /* Bit masks for USB_DMAxCONTROL */
 
 #define                   DMA_ENA  0x1        /* DMA enable */
-#define                  nDMA_ENA  0x0       
 #define                 DIRECTION  0x2        /* direction of DMA transfer */
-#define                nDIRECTION  0x0       
 #define                      MODE  0x4        /* DMA Bus error */
-#define                     nMODE  0x0       
 #define                   INT_ENA  0x8        /* Interrupt enable */
-#define                  nINT_ENA  0x0       
 #define                     EPNUM  0xf0       /* EP number */
 #define                  BUSERROR  0x100      /* DMA Bus error */
-#define                 nBUSERROR  0x0       
 
 /* Bit masks for USB_DMAxADDRHIGH */
 
@@ -3366,26 +2639,16 @@
 /* Bit masks for HMDMAx_CONTROL */
 
 #define                   HMDMAEN  0x1        /* Handshake MDMA Enable */
-#define                  nHMDMAEN  0x0       
 #define                       REP  0x2        /* Handshake MDMA Request Polarity */
-#define                      nREP  0x0       
 #define                       UTE  0x8        /* Urgency Threshold Enable */
-#define                      nUTE  0x0       
 #define                       OIE  0x10       /* Overflow Interrupt Enable */
-#define                      nOIE  0x0       
 #define                      BDIE  0x20       /* Block Done Interrupt Enable */
-#define                     nBDIE  0x0       
 #define                      MBDI  0x40       /* Mask Block Done Interrupt */
-#define                     nMBDI  0x0       
 #define                       DRQ  0x300      /* Handshake MDMA Request Type */
 #define                       RBC  0x1000     /* Force Reload of BCOUNT */
-#define                      nRBC  0x0       
 #define                        PS  0x2000     /* Pin Status */
-#define                       nPS  0x0       
 #define                        OI  0x4000     /* Overflow Interrupt Generated */
-#define                       nOI  0x0       
 #define                       BDI  0x8000     /* Block Done Interrupt Generated */
-#define                      nBDI  0x0       
 
 /* ******************************************* */
 /*     MULTI BIT MACRO ENUMERATIONS            */
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h
index a1b200fe6a1..2381ac50a2c 100644
--- a/include/asm-blackfin/mach-bf548/defBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h
@@ -46,7 +46,7 @@
 
 /* Debug/MP/Emulation Registers (0xFFC00014 - 0xFFC00014) */
 
-#define                           CHIPID  0xffc00014   
+#define                           CHIPID  0xffc00014
 
 /* System Reset and Interrupt Controller (0xFFC00100 - 0xFFC00104) */
 
@@ -1512,231 +1512,144 @@
 /*     and MULTI BIT READ MACROS                              */
 /* ********************************************************** */
 
+/* SIC_IMASK Masks */
+#define SIC_UNMASK_ALL         0x00000000	/* Unmask all peripheral interrupts */
+#define SIC_MASK_ALL           0xFFFFFFFF	/* Mask all peripheral interrupts */
+#define SIC_MASK(x)	       (1 << (x))	/* Mask Peripheral #x interrupt */
+#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x)))	/* Unmask Peripheral #x interrupt */
+
+/* SIC_IWR Masks */
+#define IWR_DISABLE_ALL        0x00000000	/* Wakeup Disable all peripherals */
+#define IWR_ENABLE_ALL         0xFFFFFFFF	/* Wakeup Enable all peripherals */
+#define IWR_ENABLE(x)	       (1 << (x))	/* Wakeup Enable Peripheral #x */
+#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x)))	/* Wakeup Disable Peripheral #x */
+
 /* Bit masks for SIC_IAR0 */
 
-#define            IRQ_PLL_WAKEUP  0x1        /* PLL Wakeup */
-#define           nIRQ_PLL_WAKEUP  0x0       
+#define            PLL_WAKEUP  0x1        /* PLL Wakeup */
 
 /* Bit masks for SIC_IWR0, SIC_IMASK0, SIC_ISR0 */
 
-#define              IRQ_DMA0_ERR  0x2        /* DMA Controller 0 Error */
-#define             nIRQ_DMA0_ERR  0x0       
-#define             IRQ_EPPI0_ERR  0x4        /* EPPI0 Error */
-#define            nIRQ_EPPI0_ERR  0x0       
-#define            IRQ_SPORT0_ERR  0x8        /* SPORT0 Error */
-#define           nIRQ_SPORT0_ERR  0x0       
-#define            IRQ_SPORT1_ERR  0x10       /* SPORT1 Error */
-#define           nIRQ_SPORT1_ERR  0x0       
-#define              IRQ_SPI0_ERR  0x20       /* SPI0 Error */
-#define             nIRQ_SPI0_ERR  0x0       
-#define             IRQ_UART0_ERR  0x40       /* UART0 Error */
-#define            nIRQ_UART0_ERR  0x0       
-#define                   IRQ_RTC  0x80       /* Real-Time Clock */
-#define                  nIRQ_RTC  0x0       
-#define                 IRQ_DMA12  0x100      /* DMA Channel 12 */
-#define                nIRQ_DMA12  0x0       
-#define                  IRQ_DMA0  0x200      /* DMA Channel 0 */
-#define                 nIRQ_DMA0  0x0       
-#define                  IRQ_DMA1  0x400      /* DMA Channel 1 */
-#define                 nIRQ_DMA1  0x0       
-#define                  IRQ_DMA2  0x800      /* DMA Channel 2 */
-#define                 nIRQ_DMA2  0x0       
-#define                  IRQ_DMA3  0x1000     /* DMA Channel 3 */
-#define                 nIRQ_DMA3  0x0       
-#define                  IRQ_DMA4  0x2000     /* DMA Channel 4 */
-#define                 nIRQ_DMA4  0x0       
-#define                  IRQ_DMA6  0x4000     /* DMA Channel 6 */
-#define                 nIRQ_DMA6  0x0       
-#define                  IRQ_DMA7  0x8000     /* DMA Channel 7 */
-#define                 nIRQ_DMA7  0x0       
-#define                 IRQ_PINT0  0x80000    /* Pin Interrupt 0 */
-#define                nIRQ_PINT0  0x0       
-#define                 IRQ_PINT1  0x100000   /* Pin Interrupt 1 */
-#define                nIRQ_PINT1  0x0       
-#define                 IRQ_MDMA0  0x200000   /* Memory DMA Stream 0 */
-#define                nIRQ_MDMA0  0x0       
-#define                 IRQ_MDMA1  0x400000   /* Memory DMA Stream 1 */
-#define                nIRQ_MDMA1  0x0       
-#define                  IRQ_WDOG  0x800000   /* Watchdog Timer */
-#define                 nIRQ_WDOG  0x0       
-#define              IRQ_DMA1_ERR  0x1000000  /* DMA Controller 1 Error */
-#define             nIRQ_DMA1_ERR  0x0       
-#define            IRQ_SPORT2_ERR  0x2000000  /* SPORT2 Error */
-#define           nIRQ_SPORT2_ERR  0x0       
-#define            IRQ_SPORT3_ERR  0x4000000  /* SPORT3 Error */
-#define           nIRQ_SPORT3_ERR  0x0       
-#define               IRQ_MXVR_SD  0x8000000  /* MXVR Synchronous Data */
-#define              nIRQ_MXVR_SD  0x0       
-#define              IRQ_SPI1_ERR  0x10000000 /* SPI1 Error */
-#define             nIRQ_SPI1_ERR  0x0       
-#define              IRQ_SPI2_ERR  0x20000000 /* SPI2 Error */
-#define             nIRQ_SPI2_ERR  0x0       
-#define             IRQ_UART1_ERR  0x40000000 /* UART1 Error */
-#define            nIRQ_UART1_ERR  0x0       
-#define             IRQ_UART2_ERR  0x80000000 /* UART2 Error */
-#define            nIRQ_UART2_ERR  0x0       
+#define              DMA0_ERR  0x2        /* DMA Controller 0 Error */
+#define             EPPI0_ERR  0x4        /* EPPI0 Error */
+#define            SPORT0_ERR  0x8        /* SPORT0 Error */
+#define            SPORT1_ERR  0x10       /* SPORT1 Error */
+#define              SPI0_ERR  0x20       /* SPI0 Error */
+#define             UART0_ERR  0x40       /* UART0 Error */
+#define                   RTC  0x80       /* Real-Time Clock */
+#define                 DMA12  0x100      /* DMA Channel 12 */
+#define                  DMA0  0x200      /* DMA Channel 0 */
+#define                  DMA1  0x400      /* DMA Channel 1 */
+#define                  DMA2  0x800      /* DMA Channel 2 */
+#define                  DMA3  0x1000     /* DMA Channel 3 */
+#define                  DMA4  0x2000     /* DMA Channel 4 */
+#define                  DMA6  0x4000     /* DMA Channel 6 */
+#define                  DMA7  0x8000     /* DMA Channel 7 */
+#define                 PINT0  0x80000    /* Pin Interrupt 0 */
+#define                 PINT1  0x100000   /* Pin Interrupt 1 */
+#define                 MDMA0  0x200000   /* Memory DMA Stream 0 */
+#define                 MDMA1  0x400000   /* Memory DMA Stream 1 */
+#define                  WDOG  0x800000   /* Watchdog Timer */
+#define              DMA1_ERR  0x1000000  /* DMA Controller 1 Error */
+#define            SPORT2_ERR  0x2000000  /* SPORT2 Error */
+#define            SPORT3_ERR  0x4000000  /* SPORT3 Error */
+#define               MXVR_SD  0x8000000  /* MXVR Synchronous Data */
+#define              SPI1_ERR  0x10000000 /* SPI1 Error */
+#define              SPI2_ERR  0x20000000 /* SPI2 Error */
+#define             UART1_ERR  0x40000000 /* UART1 Error */
+#define             UART2_ERR  0x80000000 /* UART2 Error */
 
 /* Bit masks for SIC_IWR1, SIC_IMASK1, SIC_ISR1 */
 
-#define              IRQ_CAN0_ERR  0x1        /* CAN0 Error */
-#define             nIRQ_CAN0_ERR  0x0       
-#define                 IRQ_DMA18  0x2        /* DMA Channel 18 */
-#define                nIRQ_DMA18  0x0       
-#define                 IRQ_DMA19  0x4        /* DMA Channel 19 */
-#define                nIRQ_DMA19  0x0       
-#define                 IRQ_DMA20  0x8        /* DMA Channel 20 */
-#define                nIRQ_DMA20  0x0       
-#define                 IRQ_DMA21  0x10       /* DMA Channel 21 */
-#define                nIRQ_DMA21  0x0       
-#define                 IRQ_DMA13  0x20       /* DMA Channel 13 */
-#define                nIRQ_DMA13  0x0       
-#define                 IRQ_DMA14  0x40       /* DMA Channel 14 */
-#define                nIRQ_DMA14  0x0       
-#define                  IRQ_DMA5  0x80       /* DMA Channel 5 */
-#define                 nIRQ_DMA5  0x0       
-#define                 IRQ_DMA23  0x100      /* DMA Channel 23 */
-#define                nIRQ_DMA23  0x0       
-#define                  IRQ_DMA8  0x200      /* DMA Channel 8 */
-#define                 nIRQ_DMA8  0x0       
-#define                  IRQ_DMA9  0x400      /* DMA Channel 9 */
-#define                 nIRQ_DMA9  0x0       
-#define                 IRQ_DMA10  0x800      /* DMA Channel 10 */
-#define                nIRQ_DMA10  0x0       
-#define                 IRQ_DMA11  0x1000     /* DMA Channel 11 */
-#define                nIRQ_DMA11  0x0       
-#define                  IRQ_TWI0  0x2000     /* TWI0 */
-#define                 nIRQ_TWI0  0x0       
-#define                  IRQ_TWI1  0x4000     /* TWI1 */
-#define                 nIRQ_TWI1  0x0       
-#define               IRQ_CAN0_RX  0x8000     /* CAN0 Receive */
-#define              nIRQ_CAN0_RX  0x0       
-#define               IRQ_CAN0_TX  0x10000    /* CAN0 Transmit */
-#define              nIRQ_CAN0_TX  0x0       
-#define                 IRQ_MDMA2  0x20000    /* Memory DMA Stream 0 */
-#define                nIRQ_MDMA2  0x0       
-#define                 IRQ_MDMA3  0x40000    /* Memory DMA Stream 1 */
-#define                nIRQ_MDMA3  0x0       
-#define             IRQ_MXVR_STAT  0x80000    /* MXVR Status */
-#define            nIRQ_MXVR_STAT  0x0       
-#define               IRQ_MXVR_CM  0x100000   /* MXVR Control Message */
-#define              nIRQ_MXVR_CM  0x0       
-#define               IRQ_MXVR_AP  0x200000   /* MXVR Asynchronous Packet */
-#define              nIRQ_MXVR_AP  0x0       
-#define             IRQ_EPPI1_ERR  0x400000   /* EPPI1 Error */
-#define            nIRQ_EPPI1_ERR  0x0       
-#define             IRQ_EPPI2_ERR  0x800000   /* EPPI2 Error */
-#define            nIRQ_EPPI2_ERR  0x0       
-#define             IRQ_UART3_ERR  0x1000000  /* UART3 Error */
-#define            nIRQ_UART3_ERR  0x0       
-#define              IRQ_HOST_ERR  0x2000000  /* Host DMA Port Error */
-#define             nIRQ_HOST_ERR  0x0       
-#define               IRQ_USB_ERR  0x4000000  /* USB Error */
-#define              nIRQ_USB_ERR  0x0       
-#define              IRQ_PIXC_ERR  0x8000000  /* Pixel Compositor Error */
-#define             nIRQ_PIXC_ERR  0x0       
-#define               IRQ_NFC_ERR  0x10000000 /* Nand Flash Controller Error */
-#define              nIRQ_NFC_ERR  0x0       
-#define             IRQ_ATAPI_ERR  0x20000000 /* ATAPI Error */
-#define            nIRQ_ATAPI_ERR  0x0       
-#define              IRQ_CAN1_ERR  0x40000000 /* CAN1 Error */
-#define             nIRQ_CAN1_ERR  0x0       
-#define             IRQ_DMAR0_ERR  0x80000000 /* DMAR0 Overflow Error */
-#define            nIRQ_DMAR0_ERR  0x0       
-#define             IRQ_DMAR1_ERR  0x80000000 /* DMAR1 Overflow Error */
-#define            nIRQ_DMAR1_ERR  0x0       
-#define                 IRQ_DMAR0  0x80000000 /* DMAR0 Block */
-#define                nIRQ_DMAR0  0x0       
-#define                 IRQ_DMAR1  0x80000000 /* DMAR1 Block */
-#define                nIRQ_DMAR1  0x0       
+#define              CAN0_ERR  0x1        /* CAN0 Error */
+#define                 DMA18  0x2        /* DMA Channel 18 */
+#define                 DMA19  0x4        /* DMA Channel 19 */
+#define                 DMA20  0x8        /* DMA Channel 20 */
+#define                 DMA21  0x10       /* DMA Channel 21 */
+#define                 DMA13  0x20       /* DMA Channel 13 */
+#define                 DMA14  0x40       /* DMA Channel 14 */
+#define                  DMA5  0x80       /* DMA Channel 5 */
+#define                 DMA23  0x100      /* DMA Channel 23 */
+#define                  DMA8  0x200      /* DMA Channel 8 */
+#define                  DMA9  0x400      /* DMA Channel 9 */
+#define                 DMA10  0x800      /* DMA Channel 10 */
+#define                 DMA11  0x1000     /* DMA Channel 11 */
+#define                  TWI0  0x2000     /* TWI0 */
+#define                  TWI1  0x4000     /* TWI1 */
+#define               CAN0_RX  0x8000     /* CAN0 Receive */
+#define               CAN0_TX  0x10000    /* CAN0 Transmit */
+#define                 MDMA2  0x20000    /* Memory DMA Stream 0 */
+#define                 MDMA3  0x40000    /* Memory DMA Stream 1 */
+#define             MXVR_STAT  0x80000    /* MXVR Status */
+#define               MXVR_CM  0x100000   /* MXVR Control Message */
+#define               MXVR_AP  0x200000   /* MXVR Asynchronous Packet */
+#define             EPPI1_ERR  0x400000   /* EPPI1 Error */
+#define             EPPI2_ERR  0x800000   /* EPPI2 Error */
+#define             UART3_ERR  0x1000000  /* UART3 Error */
+#define              HOST_ERR  0x2000000  /* Host DMA Port Error */
+#define               USB_ERR  0x4000000  /* USB Error */
+#define              PIXC_ERR  0x8000000  /* Pixel Compositor Error */
+#define               NFC_ERR  0x10000000 /* Nand Flash Controller Error */
+#define             ATAPI_ERR  0x20000000 /* ATAPI Error */
+#define              CAN1_ERR  0x40000000 /* CAN1 Error */
+#define             DMAR0_ERR  0x80000000 /* DMAR0 Overflow Error */
+#define             DMAR1_ERR  0x80000000 /* DMAR1 Overflow Error */
+#define                 DMAR0  0x80000000 /* DMAR0 Block */
+#define                 DMAR1  0x80000000 /* DMAR1 Block */
 
 /* Bit masks for SIC_IWR2, SIC_IMASK2, SIC_ISR2 */
 
-#define                 IRQ_DMA15  0x1        /* DMA Channel 15 */
-#define                nIRQ_DMA15  0x0       
-#define                 IRQ_DMA16  0x2        /* DMA Channel 16 */
-#define                nIRQ_DMA16  0x0       
-#define                 IRQ_DMA17  0x4        /* DMA Channel 17 */
-#define                nIRQ_DMA17  0x0       
-#define                 IRQ_DMA22  0x8        /* DMA Channel 22 */
-#define                nIRQ_DMA22  0x0       
-#define                   IRQ_CNT  0x10       /* Counter */
-#define                  nIRQ_CNT  0x0       
-#define                   IRQ_KEY  0x20       /* Keypad */
-#define                  nIRQ_KEY  0x0       
-#define               IRQ_CAN1_RX  0x40       /* CAN1 Receive */
-#define              nIRQ_CAN1_RX  0x0       
-#define               IRQ_CAN1_TX  0x80       /* CAN1 Transmit */
-#define              nIRQ_CAN1_TX  0x0       
-#define             IRQ_SDH_MASK0  0x100      /* SDH Mask 0 */
-#define            nIRQ_SDH_MASK0  0x0       
-#define             IRQ_SDH_MASK1  0x200      /* SDH Mask 1 */
-#define            nIRQ_SDH_MASK1  0x0       
-#define              IRQ_USB_EINT  0x400      /* USB Exception */
-#define             nIRQ_USB_EINT  0x0       
-#define              IRQ_USB_INT0  0x800      /* USB Interrupt 0 */
-#define             nIRQ_USB_INT0  0x0       
-#define              IRQ_USB_INT1  0x1000     /* USB Interrupt 1 */
-#define             nIRQ_USB_INT1  0x0       
-#define              IRQ_USB_INT2  0x2000     /* USB Interrupt 2 */
-#define             nIRQ_USB_INT2  0x0       
-#define            IRQ_USB_DMAINT  0x4000     /* USB DMA */
-#define           nIRQ_USB_DMAINT  0x0       
-#define                IRQ_OTPSEC  0x8000     /* OTP Access Complete */
-#define               nIRQ_OTPSEC  0x0       
-#define                IRQ_TIMER0  0x400000   /* Timer 0 */
-#define               nIRQ_TIMER0  0x0       
-#define                IRQ_TIMER1  0x800000   /* Timer 1 */
-#define               nIRQ_TIMER1  0x0       
-#define                IRQ_TIMER2  0x1000000  /* Timer 2 */
-#define               nIRQ_TIMER2  0x0       
-#define                IRQ_TIMER3  0x2000000  /* Timer 3 */
-#define               nIRQ_TIMER3  0x0       
-#define                IRQ_TIMER4  0x4000000  /* Timer 4 */
-#define               nIRQ_TIMER4  0x0       
-#define                IRQ_TIMER5  0x8000000  /* Timer 5 */
-#define               nIRQ_TIMER5  0x0       
-#define                IRQ_TIMER6  0x10000000 /* Timer 6 */
-#define               nIRQ_TIMER6  0x0       
-#define                IRQ_TIMER7  0x20000000 /* Timer 7 */
-#define               nIRQ_TIMER7  0x0       
-#define                 IRQ_PINT2  0x40000000 /* Pin Interrupt 2 */
-#define                nIRQ_PINT2  0x0       
-#define                 IRQ_PINT3  0x80000000 /* Pin Interrupt 3 */
-#define                nIRQ_PINT3  0x0       
+#define                 DMA15  0x1        /* DMA Channel 15 */
+#define                 DMA16  0x2        /* DMA Channel 16 */
+#define                 DMA17  0x4        /* DMA Channel 17 */
+#define                 DMA22  0x8        /* DMA Channel 22 */
+#define                   CNT  0x10       /* Counter */
+#define                   KEY  0x20       /* Keypad */
+#define               CAN1_RX  0x40       /* CAN1 Receive */
+#define               CAN1_TX  0x80       /* CAN1 Transmit */
+#define             SDH_INT_MASK0  0x100      /* SDH Mask 0 */
+#define             SDH_INT_MASK1  0x200      /* SDH Mask 1 */
+#define              USB_EINT  0x400      /* USB Exception */
+#define              USB_INT0  0x800      /* USB Interrupt 0 */
+#define              USB_INT1  0x1000     /* USB Interrupt 1 */
+#define              USB_INT2  0x2000     /* USB Interrupt 2 */
+#define            USB_DMAINT  0x4000     /* USB DMA */
+#define                OTPSEC  0x8000     /* OTP Access Complete */
+#define                TIMER0  0x400000   /* Timer 0 */
+#define                TIMER1  0x800000   /* Timer 1 */
+#define                TIMER2  0x1000000  /* Timer 2 */
+#define                TIMER3  0x2000000  /* Timer 3 */
+#define                TIMER4  0x4000000  /* Timer 4 */
+#define                TIMER5  0x8000000  /* Timer 5 */
+#define                TIMER6  0x10000000 /* Timer 6 */
+#define                TIMER7  0x20000000 /* Timer 7 */
+#define                 PINT2  0x40000000 /* Pin Interrupt 2 */
+#define                 PINT3  0x80000000 /* Pin Interrupt 3 */
 
 /* Bit masks for DMAx_CONFIG, MDMA_Sx_CONFIG, MDMA_Dx_CONFIG */
 
 #define                     DMAEN  0x1        /* DMA Channel Enable */
-#define                    nDMAEN  0x0       
 #define                       WNR  0x2        /* DMA Direction */
-#define                      nWNR  0x0       
-#define                    WDSIZE  0xc        /* Transfer Word Size */
+#define                  WDSIZE_8  0x0        /* Transfer Word Size = 8 */
+#define                 WDSIZE_16  0x4        /* Transfer Word Size = 16 */
+#define                 WDSIZE_32  0x8        /* Transfer Word Size = 32 */
 #define                     DMA2D  0x10       /* DMA Mode */
-#define                    nDMA2D  0x0       
 #define                   RESTART  0x20       /* Work Unit Transitions */
-#define                  nRESTART  0x0       
 #define                    DI_SEL  0x40       /* Data Interrupt Timing Select */
-#define                   nDI_SEL  0x0       
 #define                     DI_EN  0x80       /* Data Interrupt Enable */
-#define                    nDI_EN  0x0       
 #define                    NDSIZE  0xf00      /* Flex Descriptor Size */
 #define                   DMAFLOW  0xf000     /* Next Operation */
 
 /* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
 
 #define                  DMA_DONE  0x1        /* DMA Completion Interrupt Status */
-#define                 nDMA_DONE  0x0       
 #define                   DMA_ERR  0x2        /* DMA Error Interrupt Status */
-#define                  nDMA_ERR  0x0       
 #define                    DFETCH  0x4        /* DMA Descriptor Fetch */
-#define                   nDFETCH  0x0       
 #define                   DMA_RUN  0x8        /* DMA Channel Running */
-#define                  nDMA_RUN  0x0       
 
 /* Bit masks for DMAx_PERIPHERAL_MAP, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
 
 #define                     CTYPE  0x40       /* DMA Channel Type */
-#define                    nCTYPE  0x0       
 #define                      PMAP  0xf000     /* Peripheral Mapped To This Channel */
 
 /* Bit masks for DMACx_TCPER */
@@ -1756,29 +1669,28 @@
 /* Bit masks for DMAC1_PERIMUX */
 
 #define                   PMUXSDH  0x1        /* Peripheral Select for DMA22 channel */
-#define                  nPMUXSDH  0x0       
 
-/* Bit masks for EBIU_AMGCTL */
+/* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  *************************/
+/* EBIU_AMGCTL Masks																	*/
+#define AMCKEN			0x0001		/* Enable CLKOUT									*/
+#define	AMBEN_NONE		0x0000		/* All Banks Disabled								*/
+#define AMBEN_B0		0x0002		/* Enable Async Memory Bank 0 only					*/
+#define AMBEN_B0_B1		0x0004		/* Enable Async Memory Banks 0 & 1 only				*/
+#define AMBEN_B0_B1_B2	0x0006		/* Enable Async Memory Banks 0, 1, and 2			*/
+#define AMBEN_ALL		0x0008		/* Enable Async Memory Banks (all) 0, 1, 2, and 3	*/
 
-#define                    AMCKEN  0x1        /* Async Memory Enable */
-#define                   nAMCKEN  0x0       
-#define                     AMBEN  0xe        /* Async bank enable */
 
 /* Bit masks for EBIU_AMBCTL0 */
 
 #define                   B0RDYEN  0x1        /* Bank 0 ARDY Enable */
-#define                  nB0RDYEN  0x0       
 #define                  B0RDYPOL  0x2        /* Bank 0 ARDY Polarity */
-#define                 nB0RDYPOL  0x0       
 #define                      B0TT  0xc        /* Bank 0 transition time */
 #define                      B0ST  0x30       /* Bank 0 Setup time */
 #define                      B0HT  0xc0       /* Bank 0 Hold time */
 #define                     B0RAT  0xf00      /* Bank 0 Read access time */
 #define                     B0WAT  0xf000     /* Bank 0 write access time */
 #define                   B1RDYEN  0x10000    /* Bank 1 ARDY Enable */
-#define                  nB1RDYEN  0x0       
 #define                  B1RDYPOL  0x20000    /* Bank 1 ARDY Polarity */
-#define                 nB1RDYPOL  0x0       
 #define                      B1TT  0xc0000    /* Bank 1 transition time */
 #define                      B1ST  0x300000   /* Bank 1 Setup time */
 #define                      B1HT  0xc00000   /* Bank 1 Hold time */
@@ -1788,18 +1700,14 @@
 /* Bit masks for EBIU_AMBCTL1 */
 
 #define                   B2RDYEN  0x1        /* Bank 2 ARDY Enable */
-#define                  nB2RDYEN  0x0       
 #define                  B2RDYPOL  0x2        /* Bank 2 ARDY Polarity */
-#define                 nB2RDYPOL  0x0       
 #define                      B2TT  0xc        /* Bank 2 transition time */
 #define                      B2ST  0x30       /* Bank 2 Setup time */
 #define                      B2HT  0xc0       /* Bank 2 Hold time */
 #define                     B2RAT  0xf00      /* Bank 2 Read access time */
 #define                     B2WAT  0xf000     /* Bank 2 write access time */
 #define                   B3RDYEN  0x10000    /* Bank 3 ARDY Enable */
-#define                  nB3RDYEN  0x0       
 #define                  B3RDYPOL  0x20000    /* Bank 3 ARDY Polarity */
-#define                 nB3RDYPOL  0x0       
 #define                      B3TT  0xc0000    /* Bank 3 transition time */
 #define                      B3ST  0x300000   /* Bank 3 Setup time */
 #define                      B3HT  0xc00000   /* Bank 3 Hold time */
@@ -1823,19 +1731,15 @@
 /* Bit masks for EBIU_FCTL */
 
 #define               TESTSETLOCK  0x1        /* Test set lock */
-#define              nTESTSETLOCK  0x0       
 #define                      BCLK  0x6        /* Burst clock frequency */
 #define                      PGWS  0x38       /* Page wait states */
 #define                      PGSZ  0x40       /* Page size */
-#define                     nPGSZ  0x0       
 #define                      RDDL  0x380      /* Read data delay */
 
 /* Bit masks for EBIU_ARBSTAT */
 
 #define                   ARBSTAT  0x1        /* Arbitration status */
-#define                  nARBSTAT  0x0       
 #define                    BGSTAT  0x2        /* Bus grant status */
-#define                   nBGSTAT  0x0       
 
 /* Bit masks for EBIU_DDRCTL0 */
 
@@ -1861,9 +1765,7 @@
 #define               BURSTLENGTH  0x7        /* Burst length */
 #define                CASLATENCY  0x70       /* CAS latency */
 #define                  DLLRESET  0x100      /* DLL Reset */
-#define                 nDLLRESET  0x0       
 #define                      REGE  0x1000     /* Register mode enable */
-#define                     nREGE  0x0       
 
 /* Bit masks for EBIU_DDRCTL3 */
 
@@ -1876,30 +1778,19 @@
 #define                DEB3_PFLEN  0x30       /* Pre fetch length for DEB3 accesses */
 #define          DEB_ARB_PRIORITY  0x700      /* Arbitration between DEB busses */
 #define               DEB1_URGENT  0x1000     /* DEB1 Urgent */
-#define              nDEB1_URGENT  0x0       
 #define               DEB2_URGENT  0x2000     /* DEB2 Urgent */
-#define              nDEB2_URGENT  0x0       
 #define               DEB3_URGENT  0x4000     /* DEB3 Urgent */
-#define              nDEB3_URGENT  0x0       
 
 /* Bit masks for EBIU_ERRMST */
 
 #define                DEB1_ERROR  0x1        /* DEB1 Error */
-#define               nDEB1_ERROR  0x0       
 #define                DEB2_ERROR  0x2        /* DEB2 Error */
-#define               nDEB2_ERROR  0x0       
 #define                DEB3_ERROR  0x4        /* DEB3 Error */
-#define               nDEB3_ERROR  0x0       
 #define                CORE_ERROR  0x8        /* Core error */
-#define               nCORE_ERROR  0x0       
 #define                DEB_MERROR  0x10       /* DEB1 Error (2nd) */
-#define               nDEB_MERROR  0x0       
 #define               DEB2_MERROR  0x20       /* DEB2 Error (2nd) */
-#define              nDEB2_MERROR  0x0       
 #define               DEB3_MERROR  0x40       /* DEB3 Error (2nd) */
-#define              nDEB3_MERROR  0x0       
 #define               CORE_MERROR  0x80       /* Core Error (2nd) */
-#define              nCORE_MERROR  0x0       
 
 /* Bit masks for EBIU_ERRADD */
 
@@ -1908,15 +1799,10 @@
 /* Bit masks for EBIU_RSTCTL */
 
 #define                 DDRSRESET  0x1        /* DDR soft reset */
-#define                nDDRSRESET  0x0       
 #define               PFTCHSRESET  0x4        /* DDR prefetch reset */
-#define              nPFTCHSRESET  0x0       
 #define                     SRREQ  0x8        /* Self-refresh request */
-#define                    nSRREQ  0x0       
 #define                     SRACK  0x10       /* Self-refresh acknowledge */
-#define                    nSRACK  0x0       
 #define                MDDRENABLE  0x20       /* Mobile DDR enable */
-#define               nMDDRENABLE  0x0       
 
 /* Bit masks for EBIU_DDRBRC0 */
 
@@ -2013,136 +1899,74 @@
 /* Bit masks for EBIU_DDRMCEN */
 
 #define                B0WCENABLE  0x1        /* Bank 0 write count enable */
-#define               nB0WCENABLE  0x0       
 #define                B1WCENABLE  0x2        /* Bank 1 write count enable */
-#define               nB1WCENABLE  0x0       
 #define                B2WCENABLE  0x4        /* Bank 2 write count enable */
-#define               nB2WCENABLE  0x0       
 #define                B3WCENABLE  0x8        /* Bank 3 write count enable */
-#define               nB3WCENABLE  0x0       
 #define                B4WCENABLE  0x10       /* Bank 4 write count enable */
-#define               nB4WCENABLE  0x0       
 #define                B5WCENABLE  0x20       /* Bank 5 write count enable */
-#define               nB5WCENABLE  0x0       
 #define                B6WCENABLE  0x40       /* Bank 6 write count enable */
-#define               nB6WCENABLE  0x0       
 #define                B7WCENABLE  0x80       /* Bank 7 write count enable */
-#define               nB7WCENABLE  0x0       
 #define                B0RCENABLE  0x100      /* Bank 0 read count enable */
-#define               nB0RCENABLE  0x0       
 #define                B1RCENABLE  0x200      /* Bank 1 read count enable */
-#define               nB1RCENABLE  0x0       
 #define                B2RCENABLE  0x400      /* Bank 2 read count enable */
-#define               nB2RCENABLE  0x0       
 #define                B3RCENABLE  0x800      /* Bank 3 read count enable */
-#define               nB3RCENABLE  0x0       
 #define                B4RCENABLE  0x1000     /* Bank 4 read count enable */
-#define               nB4RCENABLE  0x0       
 #define                B5RCENABLE  0x2000     /* Bank 5 read count enable */
-#define               nB5RCENABLE  0x0       
 #define                B6RCENABLE  0x4000     /* Bank 6 read count enable */
-#define               nB6RCENABLE  0x0       
 #define                B7RCENABLE  0x8000     /* Bank 7 read count enable */
-#define               nB7RCENABLE  0x0       
 #define             ROWACTCENABLE  0x10000    /* DDR Row activate count enable */
-#define            nROWACTCENABLE  0x0       
 #define                RWTCENABLE  0x20000    /* DDR R/W Turn around count enable */
-#define               nRWTCENABLE  0x0       
 #define                 ARCENABLE  0x40000    /* DDR Auto-refresh count enable */
-#define                nARCENABLE  0x0       
 #define                 GC0ENABLE  0x100000   /* DDR Grant count 0 enable */
-#define                nGC0ENABLE  0x0       
 #define                 GC1ENABLE  0x200000   /* DDR Grant count 1 enable */
-#define                nGC1ENABLE  0x0       
 #define                 GC2ENABLE  0x400000   /* DDR Grant count 2 enable */
-#define                nGC2ENABLE  0x0       
 #define                 GC3ENABLE  0x800000   /* DDR Grant count 3 enable */
-#define                nGC3ENABLE  0x0       
 #define                 GCCONTROL  0x3000000  /* DDR Grant Count Control */
 
 /* Bit masks for EBIU_DDRMCCL */
 
 #define                 CB0WCOUNT  0x1        /* Clear write count 0 */
-#define                nCB0WCOUNT  0x0       
 #define                 CB1WCOUNT  0x2        /* Clear write count 1 */
-#define                nCB1WCOUNT  0x0       
 #define                 CB2WCOUNT  0x4        /* Clear write count 2 */
-#define                nCB2WCOUNT  0x0       
 #define                 CB3WCOUNT  0x8        /* Clear write count 3 */
-#define                nCB3WCOUNT  0x0       
 #define                 CB4WCOUNT  0x10       /* Clear write count 4 */
-#define                nCB4WCOUNT  0x0       
 #define                 CB5WCOUNT  0x20       /* Clear write count 5 */
-#define                nCB5WCOUNT  0x0       
 #define                 CB6WCOUNT  0x40       /* Clear write count 6 */
-#define                nCB6WCOUNT  0x0       
 #define                 CB7WCOUNT  0x80       /* Clear write count 7 */
-#define                nCB7WCOUNT  0x0       
 #define                  CBRCOUNT  0x100      /* Clear read count 0 */
-#define                 nCBRCOUNT  0x0       
 #define                 CB1RCOUNT  0x200      /* Clear read count 1 */
-#define                nCB1RCOUNT  0x0       
 #define                 CB2RCOUNT  0x400      /* Clear read count 2 */
-#define                nCB2RCOUNT  0x0       
 #define                 CB3RCOUNT  0x800      /* Clear read count 3 */
-#define                nCB3RCOUNT  0x0       
 #define                 CB4RCOUNT  0x1000     /* Clear read count 4 */
-#define                nCB4RCOUNT  0x0       
 #define                 CB5RCOUNT  0x2000     /* Clear read count 5 */
-#define                nCB5RCOUNT  0x0       
 #define                 CB6RCOUNT  0x4000     /* Clear read count 6 */
-#define                nCB6RCOUNT  0x0       
 #define                 CB7RCOUNT  0x8000     /* Clear read count 7 */
-#define                nCB7RCOUNT  0x0       
 #define                  CRACOUNT  0x10000    /* Clear row activation count */
-#define                 nCRACOUNT  0x0       
 #define                CRWTACOUNT  0x20000    /* Clear R/W turn-around count */
-#define               nCRWTACOUNT  0x0       
 #define                  CARCOUNT  0x40000    /* Clear auto-refresh count */
-#define                 nCARCOUNT  0x0       
 #define                  CG0COUNT  0x100000   /* Clear grant count 0 */
-#define                 nCG0COUNT  0x0       
 #define                  CG1COUNT  0x200000   /* Clear grant count 1 */
-#define                 nCG1COUNT  0x0       
 #define                  CG2COUNT  0x400000   /* Clear grant count 2 */
-#define                 nCG2COUNT  0x0       
 #define                  CG3COUNT  0x800000   /* Clear grant count 3 */
-#define                 nCG3COUNT  0x0       
 
 /* Bit masks for (PORTx is PORTA - PORTJ) includes PORTx_FER, PORTx_SET, PORTx_CLEAR, PORTx_DIR_SET, PORTx_DIR_CLEAR, PORTx_INEN */
 
 #define                       Px0  0x1        /* GPIO 0 */
-#define                      nPx0  0x0       
 #define                       Px1  0x2        /* GPIO 1 */
-#define                      nPx1  0x0       
 #define                       Px2  0x4        /* GPIO 2 */
-#define                      nPx2  0x0       
 #define                       Px3  0x8        /* GPIO 3 */
-#define                      nPx3  0x0       
 #define                       Px4  0x10       /* GPIO 4 */
-#define                      nPx4  0x0       
 #define                       Px5  0x20       /* GPIO 5 */
-#define                      nPx5  0x0       
 #define                       Px6  0x40       /* GPIO 6 */
-#define                      nPx6  0x0       
 #define                       Px7  0x80       /* GPIO 7 */
-#define                      nPx7  0x0       
 #define                       Px8  0x100      /* GPIO 8 */
-#define                      nPx8  0x0       
 #define                       Px9  0x200      /* GPIO 9 */
-#define                      nPx9  0x0       
 #define                      Px10  0x400      /* GPIO 10 */
-#define                     nPx10  0x0       
 #define                      Px11  0x800      /* GPIO 11 */
-#define                     nPx11  0x0       
 #define                      Px12  0x1000     /* GPIO 12 */
-#define                     nPx12  0x0       
 #define                      Px13  0x2000     /* GPIO 13 */
-#define                     nPx13  0x0       
 #define                      Px14  0x4000     /* GPIO 14 */
-#define                     nPx14  0x0       
 #define                      Px15  0x8000     /* GPIO 15 */
-#define                     nPx15  0x0       
 
 /* Bit masks for PORTA_MUX - PORTJ_MUX */
 
@@ -2167,223 +1991,129 @@
 /* Bit masks for PINTx_MASK_SET/CLEAR, PINTx_REQUEST, PINTx_LATCH, PINTx_EDGE_SET/CLEAR, PINTx_INVERT_SET/CLEAR, PINTx_PINTSTATE */
 
 #define                       IB0  0x1        /* Interrupt Bit 0 */
-#define                      nIB0  0x0       
 #define                       IB1  0x2        /* Interrupt Bit 1 */
-#define                      nIB1  0x0       
 #define                       IB2  0x4        /* Interrupt Bit 2 */
-#define                      nIB2  0x0       
 #define                       IB3  0x8        /* Interrupt Bit 3 */
-#define                      nIB3  0x0       
 #define                       IB4  0x10       /* Interrupt Bit 4 */
-#define                      nIB4  0x0       
 #define                       IB5  0x20       /* Interrupt Bit 5 */
-#define                      nIB5  0x0       
 #define                       IB6  0x40       /* Interrupt Bit 6 */
-#define                      nIB6  0x0       
 #define                       IB7  0x80       /* Interrupt Bit 7 */
-#define                      nIB7  0x0       
 #define                       IB8  0x100      /* Interrupt Bit 8 */
-#define                      nIB8  0x0       
 #define                       IB9  0x200      /* Interrupt Bit 9 */
-#define                      nIB9  0x0       
 #define                      IB10  0x400      /* Interrupt Bit 10 */
-#define                     nIB10  0x0       
 #define                      IB11  0x800      /* Interrupt Bit 11 */
-#define                     nIB11  0x0       
 #define                      IB12  0x1000     /* Interrupt Bit 12 */
-#define                     nIB12  0x0       
 #define                      IB13  0x2000     /* Interrupt Bit 13 */
-#define                     nIB13  0x0       
 #define                      IB14  0x4000     /* Interrupt Bit 14 */
-#define                     nIB14  0x0       
 #define                      IB15  0x8000     /* Interrupt Bit 15 */
-#define                     nIB15  0x0       
 
 /* Bit masks for TIMERx_CONFIG */
 
 #define                     TMODE  0x3        /* Timer Mode */
 #define                  PULSE_HI  0x4        /* Pulse Polarity */
-#define                 nPULSE_HI  0x0       
 #define                PERIOD_CNT  0x8        /* Period Count */
-#define               nPERIOD_CNT  0x0       
 #define                   IRQ_ENA  0x10       /* Interrupt Request Enable */
-#define                  nIRQ_ENA  0x0       
 #define                   TIN_SEL  0x20       /* Timer Input Select */
-#define                  nTIN_SEL  0x0       
 #define                   OUT_DIS  0x40       /* Output Pad Disable */
-#define                  nOUT_DIS  0x0       
 #define                   CLK_SEL  0x80       /* Timer Clock Select */
-#define                  nCLK_SEL  0x0       
 #define                 TOGGLE_HI  0x100      /* Toggle Mode */
-#define                nTOGGLE_HI  0x0       
 #define                   EMU_RUN  0x200      /* Emulation Behavior Select */
-#define                  nEMU_RUN  0x0       
 #define                   ERR_TYP  0xc000     /* Error Type */
 
 /* Bit masks for TIMER_ENABLE0 */
 
 #define                    TIMEN0  0x1        /* Timer 0 Enable */
-#define                   nTIMEN0  0x0       
 #define                    TIMEN1  0x2        /* Timer 1 Enable */
-#define                   nTIMEN1  0x0       
 #define                    TIMEN2  0x4        /* Timer 2 Enable */
-#define                   nTIMEN2  0x0       
 #define                    TIMEN3  0x8        /* Timer 3 Enable */
-#define                   nTIMEN3  0x0       
 #define                    TIMEN4  0x10       /* Timer 4 Enable */
-#define                   nTIMEN4  0x0       
 #define                    TIMEN5  0x20       /* Timer 5 Enable */
-#define                   nTIMEN5  0x0       
 #define                    TIMEN6  0x40       /* Timer 6 Enable */
-#define                   nTIMEN6  0x0       
 #define                    TIMEN7  0x80       /* Timer 7 Enable */
-#define                   nTIMEN7  0x0       
 
 /* Bit masks for TIMER_DISABLE0 */
 
 #define                   TIMDIS0  0x1        /* Timer 0 Disable */
-#define                  nTIMDIS0  0x0       
 #define                   TIMDIS1  0x2        /* Timer 1 Disable */
-#define                  nTIMDIS1  0x0       
 #define                   TIMDIS2  0x4        /* Timer 2 Disable */
-#define                  nTIMDIS2  0x0       
 #define                   TIMDIS3  0x8        /* Timer 3 Disable */
-#define                  nTIMDIS3  0x0       
 #define                   TIMDIS4  0x10       /* Timer 4 Disable */
-#define                  nTIMDIS4  0x0       
 #define                   TIMDIS5  0x20       /* Timer 5 Disable */
-#define                  nTIMDIS5  0x0       
 #define                   TIMDIS6  0x40       /* Timer 6 Disable */
-#define                  nTIMDIS6  0x0       
 #define                   TIMDIS7  0x80       /* Timer 7 Disable */
-#define                  nTIMDIS7  0x0       
 
 /* Bit masks for TIMER_STATUS0 */
 
 #define                    TIMIL0  0x1        /* Timer 0 Interrupt */
-#define                   nTIMIL0  0x0       
 #define                    TIMIL1  0x2        /* Timer 1 Interrupt */
-#define                   nTIMIL1  0x0       
 #define                    TIMIL2  0x4        /* Timer 2 Interrupt */
-#define                   nTIMIL2  0x0       
 #define                    TIMIL3  0x8        /* Timer 3 Interrupt */
-#define                   nTIMIL3  0x0       
 #define                 TOVF_ERR0  0x10       /* Timer 0 Counter Overflow */
-#define                nTOVF_ERR0  0x0       
 #define                 TOVF_ERR1  0x20       /* Timer 1 Counter Overflow */
-#define                nTOVF_ERR1  0x0       
 #define                 TOVF_ERR2  0x40       /* Timer 2 Counter Overflow */
-#define                nTOVF_ERR2  0x0       
 #define                 TOVF_ERR3  0x80       /* Timer 3 Counter Overflow */
-#define                nTOVF_ERR3  0x0       
 #define                     TRUN0  0x1000     /* Timer 0 Slave Enable Status */
-#define                    nTRUN0  0x0       
 #define                     TRUN1  0x2000     /* Timer 1 Slave Enable Status */
-#define                    nTRUN1  0x0       
 #define                     TRUN2  0x4000     /* Timer 2 Slave Enable Status */
-#define                    nTRUN2  0x0       
 #define                     TRUN3  0x8000     /* Timer 3 Slave Enable Status */
-#define                    nTRUN3  0x0       
 #define                    TIMIL4  0x10000    /* Timer 4 Interrupt */
-#define                   nTIMIL4  0x0       
 #define                    TIMIL5  0x20000    /* Timer 5 Interrupt */
-#define                   nTIMIL5  0x0       
 #define                    TIMIL6  0x40000    /* Timer 6 Interrupt */
-#define                   nTIMIL6  0x0       
 #define                    TIMIL7  0x80000    /* Timer 7 Interrupt */
-#define                   nTIMIL7  0x0       
 #define                 TOVF_ERR4  0x100000   /* Timer 4 Counter Overflow */
-#define                nTOVF_ERR4  0x0       
 #define                 TOVF_ERR5  0x200000   /* Timer 5 Counter Overflow */
-#define                nTOVF_ERR5  0x0       
 #define                 TOVF_ERR6  0x400000   /* Timer 6 Counter Overflow */
-#define                nTOVF_ERR6  0x0       
 #define                 TOVF_ERR7  0x800000   /* Timer 7 Counter Overflow */
-#define                nTOVF_ERR7  0x0       
 #define                     TRUN4  0x10000000 /* Timer 4 Slave Enable Status */
-#define                    nTRUN4  0x0       
 #define                     TRUN5  0x20000000 /* Timer 5 Slave Enable Status */
-#define                    nTRUN5  0x0       
 #define                     TRUN6  0x40000000 /* Timer 6 Slave Enable Status */
-#define                    nTRUN6  0x0       
 #define                     TRUN7  0x80000000 /* Timer 7 Slave Enable Status */
-#define                    nTRUN7  0x0       
 
 /* Bit masks for WDOG_CTL */
 
 #define                      WDEV  0x6        /* Watchdog Event */
 #define                      WDEN  0xff0      /* Watchdog Enable */
 #define                      WDRO  0x8000     /* Watchdog Rolled Over */
-#define                     nWDRO  0x0       
 
 /* Bit masks for CNT_CONFIG */
 
 #define                      CNTE  0x1        /* Counter Enable */
-#define                     nCNTE  0x0       
 #define                      DEBE  0x2        /* Debounce Enable */
-#define                     nDEBE  0x0       
 #define                    CDGINV  0x10       /* CDG Pin Polarity Invert */
-#define                   nCDGINV  0x0       
 #define                    CUDINV  0x20       /* CUD Pin Polarity Invert */
-#define                   nCUDINV  0x0       
 #define                    CZMINV  0x40       /* CZM Pin Polarity Invert */
-#define                   nCZMINV  0x0       
 #define                   CNTMODE  0x700      /* Counter Operating Mode */
 #define                      ZMZC  0x800      /* CZM Zeroes Counter Enable */
-#define                     nZMZC  0x0       
 #define                   BNDMODE  0x3000     /* Boundary register Mode */
 #define                    INPDIS  0x8000     /* CUG and CDG Input Disable */
-#define                   nINPDIS  0x0       
 
 /* Bit masks for CNT_IMASK */
 
 #define                      ICIE  0x1        /* Illegal Gray/Binary Code Interrupt Enable */
-#define                     nICIE  0x0       
 #define                      UCIE  0x2        /* Up count Interrupt Enable */
-#define                     nUCIE  0x0       
 #define                      DCIE  0x4        /* Down count Interrupt Enable */
-#define                     nDCIE  0x0       
 #define                    MINCIE  0x8        /* Min Count Interrupt Enable */
-#define                   nMINCIE  0x0       
 #define                    MAXCIE  0x10       /* Max Count Interrupt Enable */
-#define                   nMAXCIE  0x0       
 #define                   COV31IE  0x20       /* Bit 31 Overflow Interrupt Enable */
-#define                  nCOV31IE  0x0       
 #define                   COV15IE  0x40       /* Bit 15 Overflow Interrupt Enable */
-#define                  nCOV15IE  0x0       
 #define                   CZEROIE  0x80       /* Count to Zero Interrupt Enable */
-#define                  nCZEROIE  0x0       
 #define                     CZMIE  0x100      /* CZM Pin Interrupt Enable */
-#define                    nCZMIE  0x0       
 #define                    CZMEIE  0x200      /* CZM Error Interrupt Enable */
-#define                   nCZMEIE  0x0       
 #define                    CZMZIE  0x400      /* CZM Zeroes Counter Interrupt Enable */
-#define                   nCZMZIE  0x0       
 
 /* Bit masks for CNT_STATUS */
 
 #define                      ICII  0x1        /* Illegal Gray/Binary Code Interrupt Identifier */
-#define                     nICII  0x0       
 #define                      UCII  0x2        /* Up count Interrupt Identifier */
-#define                     nUCII  0x0       
 #define                      DCII  0x4        /* Down count Interrupt Identifier */
-#define                     nDCII  0x0       
 #define                    MINCII  0x8        /* Min Count Interrupt Identifier */
-#define                   nMINCII  0x0       
 #define                    MAXCII  0x10       /* Max Count Interrupt Identifier */
-#define                   nMAXCII  0x0       
 #define                   COV31II  0x20       /* Bit 31 Overflow Interrupt Identifier */
-#define                  nCOV31II  0x0       
 #define                   COV15II  0x40       /* Bit 15 Overflow Interrupt Identifier */
-#define                  nCOV15II  0x0       
 #define                   CZEROII  0x80       /* Count to Zero Interrupt Identifier */
-#define                  nCZEROII  0x0       
 #define                     CZMII  0x100      /* CZM Pin Interrupt Identifier */
-#define                    nCZMII  0x0       
 #define                    CZMEII  0x200      /* CZM Error Interrupt Identifier */
-#define                   nCZMEII  0x0       
 #define                    CZMZII  0x400      /* CZM Zeroes Counter Interrupt Identifier */
-#define                   nCZMZII  0x0       
 
 /* Bit masks for CNT_COMMAND */
 
@@ -2391,7 +2121,6 @@
 #define                    W1LMIN  0xf0       /* Load Min Register */
 #define                    W1LMAX  0xf00      /* Load Max Register */
 #define                  W1ZMONCE  0x1000     /* Enable CZM Clear Counter Once */
-#define                 nW1ZMONCE  0x0       
 
 /* Bit masks for CNT_DEBOUNCE */
 
@@ -2407,42 +2136,25 @@
 /* Bit masks for RTC_ICTL */
 
 #define STOPWATCH_INTERRUPT_ENABLE  0x1        /* Stopwatch Interrupt Enable */
-#define nSTOPWATCH_INTERRUPT_ENABLE  0x0       
 #define    ALARM_INTERRUPT_ENABLE  0x2        /* Alarm Interrupt Enable */
-#define   nALARM_INTERRUPT_ENABLE  0x0       
 #define  SECONDS_INTERRUPT_ENABLE  0x4        /* Seconds Interrupt Enable */
-#define nSECONDS_INTERRUPT_ENABLE  0x0       
 #define  MINUTES_INTERRUPT_ENABLE  0x8        /* Minutes Interrupt Enable */
-#define nMINUTES_INTERRUPT_ENABLE  0x0       
 #define    HOURS_INTERRUPT_ENABLE  0x10       /* Hours Interrupt Enable */
-#define   nHOURS_INTERRUPT_ENABLE  0x0       
 #define TWENTY_FOUR_HOURS_INTERRUPT_ENABLE  0x20       /* 24 Hours Interrupt Enable */
-#define nTWENTY_FOUR_HOURS_INTERRUPT_ENABLE  0x0       
 #define DAY_ALARM_INTERRUPT_ENABLE  0x40       /* Day Alarm Interrupt Enable */
-#define nDAY_ALARM_INTERRUPT_ENABLE  0x0       
 #define WRITE_COMPLETE_INTERRUPT_ENABLE  0x8000     /* Write Complete Interrupt Enable */
-#define nWRITE_COMPLETE_INTERRUPT_ENABLE  0x0       
 
 /* Bit masks for RTC_ISTAT */
 
 #define      STOPWATCH_EVENT_FLAG  0x1        /* Stopwatch Event Flag */
-#define     nSTOPWATCH_EVENT_FLAG  0x0       
 #define          ALARM_EVENT_FLAG  0x2        /* Alarm Event Flag */
-#define         nALARM_EVENT_FLAG  0x0       
 #define        SECONDS_EVENT_FLAG  0x4        /* Seconds Event Flag */
-#define       nSECONDS_EVENT_FLAG  0x0       
 #define        MINUTES_EVENT_FLAG  0x8        /* Minutes Event Flag */
-#define       nMINUTES_EVENT_FLAG  0x0       
 #define          HOURS_EVENT_FLAG  0x10       /* Hours Event Flag */
-#define         nHOURS_EVENT_FLAG  0x0       
 #define TWENTY_FOUR_HOURS_EVENT_FLAG  0x20       /* 24 Hours Event Flag */
-#define nTWENTY_FOUR_HOURS_EVENT_FLAG  0x0       
 #define      DAY_ALARM_EVENT_FLAG  0x40       /* Day Alarm Event Flag */
-#define     nDAY_ALARM_EVENT_FLAG  0x0       
 #define     WRITE_PENDING__STATUS  0x4000     /* Write Pending  Status */
-#define    nWRITE_PENDING__STATUS  0x0       
 #define            WRITE_COMPLETE  0x8000     /* Write Complete */
-#define           nWRITE_COMPLETE  0x0       
 
 /* Bit masks for RTC_SWCNT */
 
@@ -2458,21 +2170,15 @@
 /* Bit masks for RTC_PREN */
 
 #define                      PREN  0x1        /* Prescaler Enable */
-#define                     nPREN  0x0       
 
 /* Bit masks for OTP_CONTROL */
 
 #define                FUSE_FADDR  0x1ff      /* OTP/Fuse Address */
 #define                      FIEN  0x800      /* OTP/Fuse Interrupt Enable */
-#define                     nFIEN  0x0       
 #define                  FTESTDEC  0x1000     /* OTP/Fuse Test Decoder */
-#define                 nFTESTDEC  0x0       
 #define                   FWRTEST  0x2000     /* OTP/Fuse Write Test */
-#define                  nFWRTEST  0x0       
 #define                     FRDEN  0x4000     /* OTP/Fuse Read Enable */
-#define                    nFRDEN  0x0       
 #define                     FWREN  0x8000     /* OTP/Fuse Write Enable */
-#define                    nFWREN  0x0       
 
 /* Bit masks for OTP_BEN */
 
@@ -2481,15 +2187,10 @@
 /* Bit masks for OTP_STATUS */
 
 #define                     FCOMP  0x1        /* OTP/Fuse Access Complete */
-#define                    nFCOMP  0x0       
 #define                    FERROR  0x2        /* OTP/Fuse Access Error */
-#define                   nFERROR  0x0       
 #define                  MMRGLOAD  0x10       /* Memory Mapped Register Gasket Load */
-#define                 nMMRGLOAD  0x0       
 #define                  MMRGLOCK  0x20       /* Memory Mapped Register Gasket Lock */
-#define                 nMMRGLOCK  0x0       
 #define                    FPGMEN  0x40       /* OTP/Fuse Program Enable */
-#define                   nFPGMEN  0x0       
 
 /* Bit masks for OTP_TIMING */
 
@@ -2503,42 +2204,29 @@
 /* Bit masks for SECURE_SYSSWT */
 
 #define                   EMUDABL  0x1        /* Emulation Disable. */
-#define                  nEMUDABL  0x0       
 #define                   RSTDABL  0x2        /* Reset Disable */
-#define                  nRSTDABL  0x0       
 #define                   L1IDABL  0x1c       /* L1 Instruction Memory Disable. */
 #define                  L1DADABL  0xe0       /* L1 Data Bank A Memory Disable. */
 #define                  L1DBDABL  0x700      /* L1 Data Bank B Memory Disable. */
 #define                   DMA0OVR  0x800      /* DMA0 Memory Access Override */
-#define                  nDMA0OVR  0x0       
 #define                   DMA1OVR  0x1000     /* DMA1 Memory Access Override */
-#define                  nDMA1OVR  0x0       
 #define                    EMUOVR  0x4000     /* Emulation Override */
-#define                   nEMUOVR  0x0       
 #define                    OTPSEN  0x8000     /* OTP Secrets Enable. */
-#define                   nOTPSEN  0x0       
 #define                    L2DABL  0x70000    /* L2 Memory Disable. */
 
 /* Bit masks for SECURE_CONTROL */
 
 #define                   SECURE0  0x1        /* SECURE 0 */
-#define                  nSECURE0  0x0       
 #define                   SECURE1  0x2        /* SECURE 1 */
-#define                  nSECURE1  0x0       
 #define                   SECURE2  0x4        /* SECURE 2 */
-#define                  nSECURE2  0x0       
 #define                   SECURE3  0x8        /* SECURE 3 */
-#define                  nSECURE3  0x0       
 
 /* Bit masks for SECURE_STATUS */
 
 #define                   SECMODE  0x3        /* Secured Mode Control State */
 #define                       NMI  0x4        /* Non Maskable Interrupt */
-#define                      nNMI  0x0       
 #define                   AFVALID  0x8        /* Authentication Firmware Valid */
-#define                  nAFVALID  0x0       
 #define                    AFEXIT  0x10       /* Authentication Firmware Exit */
-#define                   nAFEXIT  0x0       
 #define                   SECSTAT  0xe0       /* Secure Status */
 
 /* Bit masks for PLL_DIV */
@@ -2550,42 +2238,25 @@
 
 #define                      MSEL  0x7e00     /* Multiplier Select */
 #define                    BYPASS  0x100      /* PLL Bypass Enable */
-#define                   nBYPASS  0x0       
 #define              OUTPUT_DELAY  0x80       /* External Memory Output Delay Enable */
-#define             nOUTPUT_DELAY  0x0       
 #define               INPUT_DELAY  0x40       /* External Memory Input Delay Enable */
-#define              nINPUT_DELAY  0x0       
 #define                      PDWN  0x20       /* Power Down */
-#define                     nPDWN  0x0       
 #define                    STOPCK  0x8        /* Stop Clock */
-#define                   nSTOPCK  0x0       
 #define                   PLL_OFF  0x2        /* Disable PLL */
-#define                  nPLL_OFF  0x0       
 #define                        DF  0x1        /* Divide Frequency */
-#define                       nDF  0x0       
 
 /* Bit masks for PLL_STAT */
 
 #define                PLL_LOCKED  0x20       /* PLL Locked Status */
-#define               nPLL_LOCKED  0x0       
 #define        ACTIVE_PLLDISABLED  0x4        /* Active Mode With PLL Disabled */
-#define       nACTIVE_PLLDISABLED  0x0       
 #define                   FULL_ON  0x2        /* Full-On Mode */
-#define                  nFULL_ON  0x0       
 #define         ACTIVE_PLLENABLED  0x1        /* Active Mode With PLL Enabled */
-#define        nACTIVE_PLLENABLED  0x0       
 #define                     RTCWS  0x400      /* RTC/Reset Wake-Up Status */
-#define                    nRTCWS  0x0       
 #define                     CANWS  0x800      /* CAN Wake-Up Status */
-#define                    nCANWS  0x0       
 #define                     USBWS  0x2000     /* USB Wake-Up Status */
-#define                    nUSBWS  0x0       
 #define                    KPADWS  0x4000     /* Keypad Wake-Up Status */
-#define                   nKPADWS  0x0       
 #define                     ROTWS  0x8000     /* Rotary Wake-Up Status */
-#define                    nROTWS  0x0       
 #define                      GPWS  0x1000     /* General-Purpose Wake-Up Status */
-#define                     nGPWS  0x0       
 
 /* Bit masks for VR_CTL */
 
@@ -2593,79 +2264,52 @@
 #define                      GAIN  0xc        /* Voltage Output Level Gain */
 #define                      VLEV  0xf0       /* Internal Voltage Level */
 #define                   SCKELOW  0x8000     /* Drive SCKE Low During Reset Enable */
-#define                  nSCKELOW  0x0       
 #define                      WAKE  0x100      /* RTC/Reset Wake-Up Enable */
-#define                     nWAKE  0x0       
 #define                     CANWE  0x200      /* CAN0/1 Wake-Up Enable */
-#define                    nCANWE  0x0       
 #define                      GPWE  0x400      /* General-Purpose Wake-Up Enable */
-#define                     nGPWE  0x0       
 #define                     USBWE  0x800      /* USB Wake-Up Enable */
-#define                    nUSBWE  0x0       
 #define                    KPADWE  0x1000     /* Keypad Wake-Up Enable */
-#define                   nKPADWE  0x0       
 #define                     ROTWE  0x2000     /* Rotary Wake-Up Enable */
-#define                    nROTWE  0x0       
 
 /* Bit masks for NFC_CTL */
 
 #define                    WR_DLY  0xf        /* Write Strobe Delay */
 #define                    RD_DLY  0xf0       /* Read Strobe Delay */
 #define                    NWIDTH  0x100      /* NAND Data Width */
-#define                   nNWIDTH  0x0       
 #define                   PG_SIZE  0x200      /* Page Size */
-#define                  nPG_SIZE  0x0       
 
 /* Bit masks for NFC_STAT */
 
 #define                     NBUSY  0x1        /* Not Busy */
-#define                    nNBUSY  0x0       
 #define                   WB_FULL  0x2        /* Write Buffer Full */
-#define                  nWB_FULL  0x0       
 #define                PG_WR_STAT  0x4        /* Page Write Pending */
-#define               nPG_WR_STAT  0x0       
 #define                PG_RD_STAT  0x8        /* Page Read Pending */
-#define               nPG_RD_STAT  0x0       
 #define                  WB_EMPTY  0x10       /* Write Buffer Empty */
-#define                 nWB_EMPTY  0x0       
 
 /* Bit masks for NFC_IRQSTAT */
 
 #define                  NBUSYIRQ  0x1        /* Not Busy IRQ */
-#define                 nNBUSYIRQ  0x0       
 #define                    WB_OVF  0x2        /* Write Buffer Overflow */
-#define                   nWB_OVF  0x0       
 #define                   WB_EDGE  0x4        /* Write Buffer Edge Detect */
-#define                  nWB_EDGE  0x0       
 #define                    RD_RDY  0x8        /* Read Data Ready */
-#define                   nRD_RDY  0x0       
 #define                   WR_DONE  0x10       /* Page Write Done */
-#define                  nWR_DONE  0x0       
 
 /* Bit masks for NFC_IRQMASK */
 
 #define              MASK_BUSYIRQ  0x1        /* Mask Not Busy IRQ */
-#define             nMASK_BUSYIRQ  0x0       
 #define                MASK_WBOVF  0x2        /* Mask Write Buffer Overflow */
-#define               nMASK_WBOVF  0x0       
 #define              MASK_WBEMPTY  0x4        /* Mask Write Buffer Empty */
-#define             nMASK_WBEMPTY  0x0       
 #define                MASK_RDRDY  0x8        /* Mask Read Data Ready */
-#define               nMASK_RDRDY  0x0       
 #define               MASK_WRDONE  0x10       /* Mask Write Done */
-#define              nMASK_WRDONE  0x0       
 
 /* Bit masks for NFC_RST */
 
 #define                   ECC_RST  0x1        /* ECC (and NFC counters) Reset */
-#define                  nECC_RST  0x0       
 
 /* Bit masks for NFC_PGCTL */
 
 #define               PG_RD_START  0x1        /* Page Read Start */
-#define              nPG_RD_START  0x0       
 #define               PG_WR_START  0x2        /* Page Write Start */
-#define              nPG_WR_START  0x0       
 
 /* Bit masks for NFC_ECC0 */
 
@@ -2690,56 +2334,34 @@
 /* Bit masks for CAN0_CONTROL */
 
 #define                       SRS  0x1        /* Software Reset */
-#define                      nSRS  0x0       
 #define                       DNM  0x2        /* DeviceNet Mode */
-#define                      nDNM  0x0       
 #define                       ABO  0x4        /* Auto Bus On */
-#define                      nABO  0x0       
 #define                       WBA  0x10       /* Wakeup On CAN Bus Activity */
-#define                      nWBA  0x0       
 #define                       SMR  0x20       /* Sleep Mode Request */
-#define                      nSMR  0x0       
 #define                       CSR  0x40       /* CAN Suspend Mode Request */
-#define                      nCSR  0x0       
 #define                       CCR  0x80       /* CAN Configuration Mode Request */
-#define                      nCCR  0x0       
 
 /* Bit masks for CAN0_STATUS */
 
 #define                        WT  0x1        /* CAN Transmit Warning Flag */
-#define                       nWT  0x0       
 #define                        WR  0x2        /* CAN Receive Warning Flag */
-#define                       nWR  0x0       
 #define                        EP  0x4        /* CAN Error Passive Mode */
-#define                       nEP  0x0       
 #define                       EBO  0x8        /* CAN Error Bus Off Mode */
-#define                      nEBO  0x0       
 #define                       CSA  0x40       /* CAN Suspend Mode Acknowledge */
-#define                      nCSA  0x0       
 #define                       CCA  0x80       /* CAN Configuration Mode Acknowledge */
-#define                      nCCA  0x0       
 #define                     MBPTR  0x1f00     /* Mailbox Pointer */
 #define                       TRM  0x4000     /* Transmit Mode Status */
-#define                      nTRM  0x0       
 #define                       REC  0x8000     /* Receive Mode Status */
-#define                      nREC  0x0       
 
 /* Bit masks for CAN0_DEBUG */
 
 #define                       DEC  0x1        /* Disable Transmit/Receive Error Counters */
-#define                      nDEC  0x0       
 #define                       DRI  0x2        /* Disable CANRX Input Pin */
-#define                      nDRI  0x0       
 #define                       DTO  0x4        /* Disable CANTX Output Pin */
-#define                      nDTO  0x0       
 #define                       DIL  0x8        /* Disable Internal Loop */
-#define                      nDIL  0x0       
 #define                       MAA  0x10       /* Mode Auto-Acknowledge */
-#define                      nMAA  0x0       
 #define                       MRB  0x20       /* Mode Read Back */
-#define                      nMRB  0x0       
 #define                       CDE  0x8000     /* CAN Debug Mode Enable */
-#define                      nCDE  0x0       
 
 /* Bit masks for CAN0_CLOCK */
 
@@ -2749,111 +2371,69 @@
 
 #define                       SJW  0x300      /* Synchronization Jump Width */
 #define                       SAM  0x80       /* Sampling */
-#define                      nSAM  0x0       
 #define                     TSEG2  0x70       /* Time Segment 2 */
 #define                     TSEG1  0xf        /* Time Segment 1 */
 
 /* Bit masks for CAN0_INTR */
 
 #define                     CANRX  0x80       /* Serial Input From Transceiver */
-#define                    nCANRX  0x0       
 #define                     CANTX  0x40       /* Serial Output To Transceiver */
-#define                    nCANTX  0x0       
 #define                     SMACK  0x8        /* Sleep Mode Acknowledge */
-#define                    nSMACK  0x0       
 #define                      GIRQ  0x4        /* Global Interrupt Request Status */
-#define                     nGIRQ  0x0       
 #define                    MBTIRQ  0x2        /* Mailbox Transmit Interrupt Request */
-#define                   nMBTIRQ  0x0       
 #define                    MBRIRQ  0x1        /* Mailbox Receive Interrupt Request */
-#define                   nMBRIRQ  0x0       
 
 /* Bit masks for CAN0_GIM */
 
 #define                     EWTIM  0x1        /* Error Warning Transmit Interrupt Mask */
-#define                    nEWTIM  0x0       
 #define                     EWRIM  0x2        /* Error Warning Receive Interrupt Mask */
-#define                    nEWRIM  0x0       
 #define                      EPIM  0x4        /* Error Passive Interrupt Mask */
-#define                     nEPIM  0x0       
 #define                      BOIM  0x8        /* Bus Off Interrupt Mask */
-#define                     nBOIM  0x0       
 #define                      WUIM  0x10       /* Wakeup Interrupt Mask */
-#define                     nWUIM  0x0       
 #define                     UIAIM  0x20       /* Unimplemented Address Interrupt Mask */
-#define                    nUIAIM  0x0       
 #define                      AAIM  0x40       /* Abort Acknowledge Interrupt Mask */
-#define                     nAAIM  0x0       
 #define                     RMLIM  0x80       /* Receive Message Lost Interrupt Mask */
-#define                    nRMLIM  0x0       
 #define                     UCEIM  0x100      /* Universal Counter Exceeded Interrupt Mask */
-#define                    nUCEIM  0x0       
 #define                      ADIM  0x400      /* Access Denied Interrupt Mask */
-#define                     nADIM  0x0       
 
 /* Bit masks for CAN0_GIS */
 
 #define                     EWTIS  0x1        /* Error Warning Transmit Interrupt Status */
-#define                    nEWTIS  0x0       
 #define                     EWRIS  0x2        /* Error Warning Receive Interrupt Status */
-#define                    nEWRIS  0x0       
 #define                      EPIS  0x4        /* Error Passive Interrupt Status */
-#define                     nEPIS  0x0       
 #define                      BOIS  0x8        /* Bus Off Interrupt Status */
-#define                     nBOIS  0x0       
 #define                      WUIS  0x10       /* Wakeup Interrupt Status */
-#define                     nWUIS  0x0       
 #define                     UIAIS  0x20       /* Unimplemented Address Interrupt Status */
-#define                    nUIAIS  0x0       
 #define                      AAIS  0x40       /* Abort Acknowledge Interrupt Status */
-#define                     nAAIS  0x0       
 #define                     RMLIS  0x80       /* Receive Message Lost Interrupt Status */
-#define                    nRMLIS  0x0       
 #define                     UCEIS  0x100      /* Universal Counter Exceeded Interrupt Status */
-#define                    nUCEIS  0x0       
 #define                      ADIS  0x400      /* Access Denied Interrupt Status */
-#define                     nADIS  0x0       
 
 /* Bit masks for CAN0_GIF */
 
 #define                     EWTIF  0x1        /* Error Warning Transmit Interrupt Flag */
-#define                    nEWTIF  0x0       
 #define                     EWRIF  0x2        /* Error Warning Receive Interrupt Flag */
-#define                    nEWRIF  0x0       
 #define                      EPIF  0x4        /* Error Passive Interrupt Flag */
-#define                     nEPIF  0x0       
 #define                      BOIF  0x8        /* Bus Off Interrupt Flag */
-#define                     nBOIF  0x0       
 #define                      WUIF  0x10       /* Wakeup Interrupt Flag */
-#define                     nWUIF  0x0       
 #define                     UIAIF  0x20       /* Unimplemented Address Interrupt Flag */
-#define                    nUIAIF  0x0       
 #define                      AAIF  0x40       /* Abort Acknowledge Interrupt Flag */
-#define                     nAAIF  0x0       
 #define                     RMLIF  0x80       /* Receive Message Lost Interrupt Flag */
-#define                    nRMLIF  0x0       
 #define                     UCEIF  0x100      /* Universal Counter Exceeded Interrupt Flag */
-#define                    nUCEIF  0x0       
 #define                      ADIF  0x400      /* Access Denied Interrupt Flag */
-#define                     nADIF  0x0       
 
 /* Bit masks for CAN0_MBTD */
 
 #define                       TDR  0x80       /* Temporary Disable Request */
-#define                      nTDR  0x0       
 #define                       TDA  0x40       /* Temporary Disable Acknowledge */
-#define                      nTDA  0x0       
 #define                     TDPTR  0x1f       /* Temporary Disable Pointer */
 
 /* Bit masks for CAN0_UCCNF */
 
 #define                     UCCNF  0xf        /* Universal Counter Configuration */
 #define                      UCRC  0x20       /* Universal Counter Reload/Clear */
-#define                     nUCRC  0x0       
 #define                      UCCT  0x40       /* Universal Counter CAN Trigger */
-#define                     nUCCT  0x0       
 #define                       UCE  0x80       /* Universal Counter Enable */
-#define                      nUCE  0x0       
 
 /* Bit masks for CAN0_UCCNT */
 
@@ -2871,17 +2451,11 @@
 /* Bit masks for CAN0_ESR */
 
 #define                       FER  0x80       /* Form Error */
-#define                      nFER  0x0       
 #define                       BEF  0x40       /* Bit Error Flag */
-#define                      nBEF  0x0       
 #define                       SA0  0x20       /* Stuck At Dominant */
-#define                      nSA0  0x0       
 #define                      CRCE  0x10       /* CRC Error */
-#define                     nCRCE  0x0       
 #define                       SER  0x8        /* Stuff Bit Error */
-#define                      nSER  0x0       
 #define                      ACKE  0x4        /* Acknowledge Error */
-#define                     nACKE  0x0       
 
 /* Bit masks for CAN0_EWR */
 
@@ -2891,11 +2465,8 @@
 /* Bit masks for CAN0_AMxx_H */
 
 #define                       FDF  0x8000     /* Filter On Data Field */
-#define                      nFDF  0x0       
 #define                       FMD  0x4000     /* Full Mask Data */
-#define                      nFMD  0x0       
 #define                     AMIDE  0x2000     /* Acceptance Mask Identifier Extension */
-#define                    nAMIDE  0x0       
 #define                    BASEID  0x1ffc     /* Base Identifier */
 #define                  EXTID_HI  0x3        /* Extended Identifier High Bits */
 
@@ -2907,11 +2478,8 @@
 /* Bit masks for CAN0_MBxx_ID1 */
 
 #define                       AME  0x8000     /* Acceptance Mask Enable */
-#define                      nAME  0x0       
 #define                       RTR  0x4000     /* Remote Transmission Request */
-#define                      nRTR  0x0       
 #define                       IDE  0x2000     /* Identifier Extension */
-#define                      nIDE  0x0       
 #define                    BASEID  0x1ffc     /* Base Identifier */
 #define                  EXTID_HI  0x3        /* Extended Identifier High Bits */
 
@@ -2951,977 +2519,534 @@
 /* Bit masks for CAN0_MC1 */
 
 #define                       MC0  0x1        /* Mailbox 0 Enable */
-#define                      nMC0  0x0       
 #define                       MC1  0x2        /* Mailbox 1 Enable */
-#define                      nMC1  0x0       
 #define                       MC2  0x4        /* Mailbox 2 Enable */
-#define                      nMC2  0x0       
 #define                       MC3  0x8        /* Mailbox 3 Enable */
-#define                      nMC3  0x0       
 #define                       MC4  0x10       /* Mailbox 4 Enable */
-#define                      nMC4  0x0       
 #define                       MC5  0x20       /* Mailbox 5 Enable */
-#define                      nMC5  0x0       
 #define                       MC6  0x40       /* Mailbox 6 Enable */
-#define                      nMC6  0x0       
 #define                       MC7  0x80       /* Mailbox 7 Enable */
-#define                      nMC7  0x0       
 #define                       MC8  0x100      /* Mailbox 8 Enable */
-#define                      nMC8  0x0       
 #define                       MC9  0x200      /* Mailbox 9 Enable */
-#define                      nMC9  0x0       
 #define                      MC10  0x400      /* Mailbox 10 Enable */
-#define                     nMC10  0x0       
 #define                      MC11  0x800      /* Mailbox 11 Enable */
-#define                     nMC11  0x0       
 #define                      MC12  0x1000     /* Mailbox 12 Enable */
-#define                     nMC12  0x0       
 #define                      MC13  0x2000     /* Mailbox 13 Enable */
-#define                     nMC13  0x0       
 #define                      MC14  0x4000     /* Mailbox 14 Enable */
-#define                     nMC14  0x0       
 #define                      MC15  0x8000     /* Mailbox 15 Enable */
-#define                     nMC15  0x0       
 
 /* Bit masks for CAN0_MC2 */
 
 #define                      MC16  0x1        /* Mailbox 16 Enable */
-#define                     nMC16  0x0       
 #define                      MC17  0x2        /* Mailbox 17 Enable */
-#define                     nMC17  0x0       
 #define                      MC18  0x4        /* Mailbox 18 Enable */
-#define                     nMC18  0x0       
 #define                      MC19  0x8        /* Mailbox 19 Enable */
-#define                     nMC19  0x0       
 #define                      MC20  0x10       /* Mailbox 20 Enable */
-#define                     nMC20  0x0       
 #define                      MC21  0x20       /* Mailbox 21 Enable */
-#define                     nMC21  0x0       
 #define                      MC22  0x40       /* Mailbox 22 Enable */
-#define                     nMC22  0x0       
 #define                      MC23  0x80       /* Mailbox 23 Enable */
-#define                     nMC23  0x0       
 #define                      MC24  0x100      /* Mailbox 24 Enable */
-#define                     nMC24  0x0       
 #define                      MC25  0x200      /* Mailbox 25 Enable */
-#define                     nMC25  0x0       
 #define                      MC26  0x400      /* Mailbox 26 Enable */
-#define                     nMC26  0x0       
 #define                      MC27  0x800      /* Mailbox 27 Enable */
-#define                     nMC27  0x0       
 #define                      MC28  0x1000     /* Mailbox 28 Enable */
-#define                     nMC28  0x0       
 #define                      MC29  0x2000     /* Mailbox 29 Enable */
-#define                     nMC29  0x0       
 #define                      MC30  0x4000     /* Mailbox 30 Enable */
-#define                     nMC30  0x0       
 #define                      MC31  0x8000     /* Mailbox 31 Enable */
-#define                     nMC31  0x0       
 
 /* Bit masks for CAN0_MD1 */
 
 #define                       MD0  0x1        /* Mailbox 0 Receive Enable */
-#define                      nMD0  0x0       
 #define                       MD1  0x2        /* Mailbox 1 Receive Enable */
-#define                      nMD1  0x0       
 #define                       MD2  0x4        /* Mailbox 2 Receive Enable */
-#define                      nMD2  0x0       
 #define                       MD3  0x8        /* Mailbox 3 Receive Enable */
-#define                      nMD3  0x0       
 #define                       MD4  0x10       /* Mailbox 4 Receive Enable */
-#define                      nMD4  0x0       
 #define                       MD5  0x20       /* Mailbox 5 Receive Enable */
-#define                      nMD5  0x0       
 #define                       MD6  0x40       /* Mailbox 6 Receive Enable */
-#define                      nMD6  0x0       
 #define                       MD7  0x80       /* Mailbox 7 Receive Enable */
-#define                      nMD7  0x0       
 #define                       MD8  0x100      /* Mailbox 8 Receive Enable */
-#define                      nMD8  0x0       
 #define                       MD9  0x200      /* Mailbox 9 Receive Enable */
-#define                      nMD9  0x0       
 #define                      MD10  0x400      /* Mailbox 10 Receive Enable */
-#define                     nMD10  0x0       
 #define                      MD11  0x800      /* Mailbox 11 Receive Enable */
-#define                     nMD11  0x0       
 #define                      MD12  0x1000     /* Mailbox 12 Receive Enable */
-#define                     nMD12  0x0       
 #define                      MD13  0x2000     /* Mailbox 13 Receive Enable */
-#define                     nMD13  0x0       
 #define                      MD14  0x4000     /* Mailbox 14 Receive Enable */
-#define                     nMD14  0x0       
 #define                      MD15  0x8000     /* Mailbox 15 Receive Enable */
-#define                     nMD15  0x0       
 
 /* Bit masks for CAN0_MD2 */
 
 #define                      MD16  0x1        /* Mailbox 16 Receive Enable */
-#define                     nMD16  0x0       
 #define                      MD17  0x2        /* Mailbox 17 Receive Enable */
-#define                     nMD17  0x0       
 #define                      MD18  0x4        /* Mailbox 18 Receive Enable */
-#define                     nMD18  0x0       
 #define                      MD19  0x8        /* Mailbox 19 Receive Enable */
-#define                     nMD19  0x0       
 #define                      MD20  0x10       /* Mailbox 20 Receive Enable */
-#define                     nMD20  0x0       
 #define                      MD21  0x20       /* Mailbox 21 Receive Enable */
-#define                     nMD21  0x0       
 #define                      MD22  0x40       /* Mailbox 22 Receive Enable */
-#define                     nMD22  0x0       
 #define                      MD23  0x80       /* Mailbox 23 Receive Enable */
-#define                     nMD23  0x0       
 #define                      MD24  0x100      /* Mailbox 24 Receive Enable */
-#define                     nMD24  0x0       
 #define                      MD25  0x200      /* Mailbox 25 Receive Enable */
-#define                     nMD25  0x0       
 #define                      MD26  0x400      /* Mailbox 26 Receive Enable */
-#define                     nMD26  0x0       
 #define                      MD27  0x800      /* Mailbox 27 Receive Enable */
-#define                     nMD27  0x0       
 #define                      MD28  0x1000     /* Mailbox 28 Receive Enable */
-#define                     nMD28  0x0       
 #define                      MD29  0x2000     /* Mailbox 29 Receive Enable */
-#define                     nMD29  0x0       
 #define                      MD30  0x4000     /* Mailbox 30 Receive Enable */
-#define                     nMD30  0x0       
 #define                      MD31  0x8000     /* Mailbox 31 Receive Enable */
-#define                     nMD31  0x0       
 
 /* Bit masks for CAN0_RMP1 */
 
 #define                      RMP0  0x1        /* Mailbox 0 Receive Message Pending */
-#define                     nRMP0  0x0       
 #define                      RMP1  0x2        /* Mailbox 1 Receive Message Pending */
-#define                     nRMP1  0x0       
 #define                      RMP2  0x4        /* Mailbox 2 Receive Message Pending */
-#define                     nRMP2  0x0       
 #define                      RMP3  0x8        /* Mailbox 3 Receive Message Pending */
-#define                     nRMP3  0x0       
 #define                      RMP4  0x10       /* Mailbox 4 Receive Message Pending */
-#define                     nRMP4  0x0       
 #define                      RMP5  0x20       /* Mailbox 5 Receive Message Pending */
-#define                     nRMP5  0x0       
 #define                      RMP6  0x40       /* Mailbox 6 Receive Message Pending */
-#define                     nRMP6  0x0       
 #define                      RMP7  0x80       /* Mailbox 7 Receive Message Pending */
-#define                     nRMP7  0x0       
 #define                      RMP8  0x100      /* Mailbox 8 Receive Message Pending */
-#define                     nRMP8  0x0       
 #define                      RMP9  0x200      /* Mailbox 9 Receive Message Pending */
-#define                     nRMP9  0x0       
 #define                     RMP10  0x400      /* Mailbox 10 Receive Message Pending */
-#define                    nRMP10  0x0       
 #define                     RMP11  0x800      /* Mailbox 11 Receive Message Pending */
-#define                    nRMP11  0x0       
 #define                     RMP12  0x1000     /* Mailbox 12 Receive Message Pending */
-#define                    nRMP12  0x0       
 #define                     RMP13  0x2000     /* Mailbox 13 Receive Message Pending */
-#define                    nRMP13  0x0       
 #define                     RMP14  0x4000     /* Mailbox 14 Receive Message Pending */
-#define                    nRMP14  0x0       
 #define                     RMP15  0x8000     /* Mailbox 15 Receive Message Pending */
-#define                    nRMP15  0x0       
 
 /* Bit masks for CAN0_RMP2 */
 
 #define                     RMP16  0x1        /* Mailbox 16 Receive Message Pending */
-#define                    nRMP16  0x0       
 #define                     RMP17  0x2        /* Mailbox 17 Receive Message Pending */
-#define                    nRMP17  0x0       
 #define                     RMP18  0x4        /* Mailbox 18 Receive Message Pending */
-#define                    nRMP18  0x0       
 #define                     RMP19  0x8        /* Mailbox 19 Receive Message Pending */
-#define                    nRMP19  0x0       
 #define                     RMP20  0x10       /* Mailbox 20 Receive Message Pending */
-#define                    nRMP20  0x0       
 #define                     RMP21  0x20       /* Mailbox 21 Receive Message Pending */
-#define                    nRMP21  0x0       
 #define                     RMP22  0x40       /* Mailbox 22 Receive Message Pending */
-#define                    nRMP22  0x0       
 #define                     RMP23  0x80       /* Mailbox 23 Receive Message Pending */
-#define                    nRMP23  0x0       
 #define                     RMP24  0x100      /* Mailbox 24 Receive Message Pending */
-#define                    nRMP24  0x0       
 #define                     RMP25  0x200      /* Mailbox 25 Receive Message Pending */
-#define                    nRMP25  0x0       
 #define                     RMP26  0x400      /* Mailbox 26 Receive Message Pending */
-#define                    nRMP26  0x0       
 #define                     RMP27  0x800      /* Mailbox 27 Receive Message Pending */
-#define                    nRMP27  0x0       
 #define                     RMP28  0x1000     /* Mailbox 28 Receive Message Pending */
-#define                    nRMP28  0x0       
 #define                     RMP29  0x2000     /* Mailbox 29 Receive Message Pending */
-#define                    nRMP29  0x0       
 #define                     RMP30  0x4000     /* Mailbox 30 Receive Message Pending */
-#define                    nRMP30  0x0       
 #define                     RMP31  0x8000     /* Mailbox 31 Receive Message Pending */
-#define                    nRMP31  0x0       
 
 /* Bit masks for CAN0_RML1 */
 
 #define                      RML0  0x1        /* Mailbox 0 Receive Message Lost */
-#define                     nRML0  0x0       
 #define                      RML1  0x2        /* Mailbox 1 Receive Message Lost */
-#define                     nRML1  0x0       
 #define                      RML2  0x4        /* Mailbox 2 Receive Message Lost */
-#define                     nRML2  0x0       
 #define                      RML3  0x8        /* Mailbox 3 Receive Message Lost */
-#define                     nRML3  0x0       
 #define                      RML4  0x10       /* Mailbox 4 Receive Message Lost */
-#define                     nRML4  0x0       
 #define                      RML5  0x20       /* Mailbox 5 Receive Message Lost */
-#define                     nRML5  0x0       
 #define                      RML6  0x40       /* Mailbox 6 Receive Message Lost */
-#define                     nRML6  0x0       
 #define                      RML7  0x80       /* Mailbox 7 Receive Message Lost */
-#define                     nRML7  0x0       
 #define                      RML8  0x100      /* Mailbox 8 Receive Message Lost */
-#define                     nRML8  0x0       
 #define                      RML9  0x200      /* Mailbox 9 Receive Message Lost */
-#define                     nRML9  0x0       
 #define                     RML10  0x400      /* Mailbox 10 Receive Message Lost */
-#define                    nRML10  0x0       
 #define                     RML11  0x800      /* Mailbox 11 Receive Message Lost */
-#define                    nRML11  0x0       
 #define                     RML12  0x1000     /* Mailbox 12 Receive Message Lost */
-#define                    nRML12  0x0       
 #define                     RML13  0x2000     /* Mailbox 13 Receive Message Lost */
-#define                    nRML13  0x0       
 #define                     RML14  0x4000     /* Mailbox 14 Receive Message Lost */
-#define                    nRML14  0x0       
 #define                     RML15  0x8000     /* Mailbox 15 Receive Message Lost */
-#define                    nRML15  0x0       
 
 /* Bit masks for CAN0_RML2 */
 
 #define                     RML16  0x1        /* Mailbox 16 Receive Message Lost */
-#define                    nRML16  0x0       
 #define                     RML17  0x2        /* Mailbox 17 Receive Message Lost */
-#define                    nRML17  0x0       
 #define                     RML18  0x4        /* Mailbox 18 Receive Message Lost */
-#define                    nRML18  0x0       
 #define                     RML19  0x8        /* Mailbox 19 Receive Message Lost */
-#define                    nRML19  0x0       
 #define                     RML20  0x10       /* Mailbox 20 Receive Message Lost */
-#define                    nRML20  0x0       
 #define                     RML21  0x20       /* Mailbox 21 Receive Message Lost */
-#define                    nRML21  0x0       
 #define                     RML22  0x40       /* Mailbox 22 Receive Message Lost */
-#define                    nRML22  0x0       
 #define                     RML23  0x80       /* Mailbox 23 Receive Message Lost */
-#define                    nRML23  0x0       
 #define                     RML24  0x100      /* Mailbox 24 Receive Message Lost */
-#define                    nRML24  0x0       
 #define                     RML25  0x200      /* Mailbox 25 Receive Message Lost */
-#define                    nRML25  0x0       
 #define                     RML26  0x400      /* Mailbox 26 Receive Message Lost */
-#define                    nRML26  0x0       
 #define                     RML27  0x800      /* Mailbox 27 Receive Message Lost */
-#define                    nRML27  0x0       
 #define                     RML28  0x1000     /* Mailbox 28 Receive Message Lost */
-#define                    nRML28  0x0       
 #define                     RML29  0x2000     /* Mailbox 29 Receive Message Lost */
-#define                    nRML29  0x0       
 #define                     RML30  0x4000     /* Mailbox 30 Receive Message Lost */
-#define                    nRML30  0x0       
 #define                     RML31  0x8000     /* Mailbox 31 Receive Message Lost */
-#define                    nRML31  0x0       
 
 /* Bit masks for CAN0_OPSS1 */
 
 #define                     OPSS0  0x1        /* Mailbox 0 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS0  0x0       
 #define                     OPSS1  0x2        /* Mailbox 1 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS1  0x0       
 #define                     OPSS2  0x4        /* Mailbox 2 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS2  0x0       
 #define                     OPSS3  0x8        /* Mailbox 3 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS3  0x0       
 #define                     OPSS4  0x10       /* Mailbox 4 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS4  0x0       
 #define                     OPSS5  0x20       /* Mailbox 5 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS5  0x0       
 #define                     OPSS6  0x40       /* Mailbox 6 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS6  0x0       
 #define                     OPSS7  0x80       /* Mailbox 7 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS7  0x0       
 #define                     OPSS8  0x100      /* Mailbox 8 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS8  0x0       
 #define                     OPSS9  0x200      /* Mailbox 9 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    nOPSS9  0x0       
 #define                    OPSS10  0x400      /* Mailbox 10 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS10  0x0       
 #define                    OPSS11  0x800      /* Mailbox 11 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS11  0x0       
 #define                    OPSS12  0x1000     /* Mailbox 12 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS12  0x0       
 #define                    OPSS13  0x2000     /* Mailbox 13 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS13  0x0       
 #define                    OPSS14  0x4000     /* Mailbox 14 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS14  0x0       
 #define                    OPSS15  0x8000     /* Mailbox 15 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS15  0x0       
 
 /* Bit masks for CAN0_OPSS2 */
 
 #define                    OPSS16  0x1        /* Mailbox 16 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS16  0x0       
 #define                    OPSS17  0x2        /* Mailbox 17 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS17  0x0       
 #define                    OPSS18  0x4        /* Mailbox 18 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS18  0x0       
 #define                    OPSS19  0x8        /* Mailbox 19 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS19  0x0       
 #define                    OPSS20  0x10       /* Mailbox 20 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS20  0x0       
 #define                    OPSS21  0x20       /* Mailbox 21 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS21  0x0       
 #define                    OPSS22  0x40       /* Mailbox 22 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS22  0x0       
 #define                    OPSS23  0x80       /* Mailbox 23 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS23  0x0       
 #define                    OPSS24  0x100      /* Mailbox 24 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS24  0x0       
 #define                    OPSS25  0x200      /* Mailbox 25 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS25  0x0       
 #define                    OPSS26  0x400      /* Mailbox 26 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS26  0x0       
 #define                    OPSS27  0x800      /* Mailbox 27 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS27  0x0       
 #define                    OPSS28  0x1000     /* Mailbox 28 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS28  0x0       
 #define                    OPSS29  0x2000     /* Mailbox 29 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS29  0x0       
 #define                    OPSS30  0x4000     /* Mailbox 30 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS30  0x0       
 #define                    OPSS31  0x8000     /* Mailbox 31 Overwrite Protection/Single-Shot Transmission Enable */
-#define                   nOPSS31  0x0       
 
 /* Bit masks for CAN0_TRS1 */
 
 #define                      TRS0  0x1        /* Mailbox 0 Transmit Request Set */
-#define                     nTRS0  0x0       
 #define                      TRS1  0x2        /* Mailbox 1 Transmit Request Set */
-#define                     nTRS1  0x0       
 #define                      TRS2  0x4        /* Mailbox 2 Transmit Request Set */
-#define                     nTRS2  0x0       
 #define                      TRS3  0x8        /* Mailbox 3 Transmit Request Set */
-#define                     nTRS3  0x0       
 #define                      TRS4  0x10       /* Mailbox 4 Transmit Request Set */
-#define                     nTRS4  0x0       
 #define                      TRS5  0x20       /* Mailbox 5 Transmit Request Set */
-#define                     nTRS5  0x0       
 #define                      TRS6  0x40       /* Mailbox 6 Transmit Request Set */
-#define                     nTRS6  0x0       
 #define                      TRS7  0x80       /* Mailbox 7 Transmit Request Set */
-#define                     nTRS7  0x0       
 #define                      TRS8  0x100      /* Mailbox 8 Transmit Request Set */
-#define                     nTRS8  0x0       
 #define                      TRS9  0x200      /* Mailbox 9 Transmit Request Set */
-#define                     nTRS9  0x0       
 #define                     TRS10  0x400      /* Mailbox 10 Transmit Request Set */
-#define                    nTRS10  0x0       
 #define                     TRS11  0x800      /* Mailbox 11 Transmit Request Set */
-#define                    nTRS11  0x0       
 #define                     TRS12  0x1000     /* Mailbox 12 Transmit Request Set */
-#define                    nTRS12  0x0       
 #define                     TRS13  0x2000     /* Mailbox 13 Transmit Request Set */
-#define                    nTRS13  0x0       
 #define                     TRS14  0x4000     /* Mailbox 14 Transmit Request Set */
-#define                    nTRS14  0x0       
 #define                     TRS15  0x8000     /* Mailbox 15 Transmit Request Set */
-#define                    nTRS15  0x0       
 
 /* Bit masks for CAN0_TRS2 */
 
 #define                     TRS16  0x1        /* Mailbox 16 Transmit Request Set */
-#define                    nTRS16  0x0       
 #define                     TRS17  0x2        /* Mailbox 17 Transmit Request Set */
-#define                    nTRS17  0x0       
 #define                     TRS18  0x4        /* Mailbox 18 Transmit Request Set */
-#define                    nTRS18  0x0       
 #define                     TRS19  0x8        /* Mailbox 19 Transmit Request Set */
-#define                    nTRS19  0x0       
 #define                     TRS20  0x10       /* Mailbox 20 Transmit Request Set */
-#define                    nTRS20  0x0       
 #define                     TRS21  0x20       /* Mailbox 21 Transmit Request Set */
-#define                    nTRS21  0x0       
 #define                     TRS22  0x40       /* Mailbox 22 Transmit Request Set */
-#define                    nTRS22  0x0       
 #define                     TRS23  0x80       /* Mailbox 23 Transmit Request Set */
-#define                    nTRS23  0x0       
 #define                     TRS24  0x100      /* Mailbox 24 Transmit Request Set */
-#define                    nTRS24  0x0       
 #define                     TRS25  0x200      /* Mailbox 25 Transmit Request Set */
-#define                    nTRS25  0x0       
 #define                     TRS26  0x400      /* Mailbox 26 Transmit Request Set */
-#define                    nTRS26  0x0       
 #define                     TRS27  0x800      /* Mailbox 27 Transmit Request Set */
-#define                    nTRS27  0x0       
 #define                     TRS28  0x1000     /* Mailbox 28 Transmit Request Set */
-#define                    nTRS28  0x0       
 #define                     TRS29  0x2000     /* Mailbox 29 Transmit Request Set */
-#define                    nTRS29  0x0       
 #define                     TRS30  0x4000     /* Mailbox 30 Transmit Request Set */
-#define                    nTRS30  0x0       
 #define                     TRS31  0x8000     /* Mailbox 31 Transmit Request Set */
-#define                    nTRS31  0x0       
 
 /* Bit masks for CAN0_TRR1 */
 
 #define                      TRR0  0x1        /* Mailbox 0 Transmit Request Reset */
-#define                     nTRR0  0x0       
 #define                      TRR1  0x2        /* Mailbox 1 Transmit Request Reset */
-#define                     nTRR1  0x0       
 #define                      TRR2  0x4        /* Mailbox 2 Transmit Request Reset */
-#define                     nTRR2  0x0       
 #define                      TRR3  0x8        /* Mailbox 3 Transmit Request Reset */
-#define                     nTRR3  0x0       
 #define                      TRR4  0x10       /* Mailbox 4 Transmit Request Reset */
-#define                     nTRR4  0x0       
 #define                      TRR5  0x20       /* Mailbox 5 Transmit Request Reset */
-#define                     nTRR5  0x0       
 #define                      TRR6  0x40       /* Mailbox 6 Transmit Request Reset */
-#define                     nTRR6  0x0       
 #define                      TRR7  0x80       /* Mailbox 7 Transmit Request Reset */
-#define                     nTRR7  0x0       
 #define                      TRR8  0x100      /* Mailbox 8 Transmit Request Reset */
-#define                     nTRR8  0x0       
 #define                      TRR9  0x200      /* Mailbox 9 Transmit Request Reset */
-#define                     nTRR9  0x0       
 #define                     TRR10  0x400      /* Mailbox 10 Transmit Request Reset */
-#define                    nTRR10  0x0       
 #define                     TRR11  0x800      /* Mailbox 11 Transmit Request Reset */
-#define                    nTRR11  0x0       
 #define                     TRR12  0x1000     /* Mailbox 12 Transmit Request Reset */
-#define                    nTRR12  0x0       
 #define                     TRR13  0x2000     /* Mailbox 13 Transmit Request Reset */
-#define                    nTRR13  0x0       
 #define                     TRR14  0x4000     /* Mailbox 14 Transmit Request Reset */
-#define                    nTRR14  0x0       
 #define                     TRR15  0x8000     /* Mailbox 15 Transmit Request Reset */
-#define                    nTRR15  0x0       
 
 /* Bit masks for CAN0_TRR2 */
 
 #define                     TRR16  0x1        /* Mailbox 16 Transmit Request Reset */
-#define                    nTRR16  0x0       
 #define                     TRR17  0x2        /* Mailbox 17 Transmit Request Reset */
-#define                    nTRR17  0x0       
 #define                     TRR18  0x4        /* Mailbox 18 Transmit Request Reset */
-#define                    nTRR18  0x0       
 #define                     TRR19  0x8        /* Mailbox 19 Transmit Request Reset */
-#define                    nTRR19  0x0       
 #define                     TRR20  0x10       /* Mailbox 20 Transmit Request Reset */
-#define                    nTRR20  0x0       
 #define                     TRR21  0x20       /* Mailbox 21 Transmit Request Reset */
-#define                    nTRR21  0x0       
 #define                     TRR22  0x40       /* Mailbox 22 Transmit Request Reset */
-#define                    nTRR22  0x0       
 #define                     TRR23  0x80       /* Mailbox 23 Transmit Request Reset */
-#define                    nTRR23  0x0       
 #define                     TRR24  0x100      /* Mailbox 24 Transmit Request Reset */
-#define                    nTRR24  0x0       
 #define                     TRR25  0x200      /* Mailbox 25 Transmit Request Reset */
-#define                    nTRR25  0x0       
 #define                     TRR26  0x400      /* Mailbox 26 Transmit Request Reset */
-#define                    nTRR26  0x0       
 #define                     TRR27  0x800      /* Mailbox 27 Transmit Request Reset */
-#define                    nTRR27  0x0       
 #define                     TRR28  0x1000     /* Mailbox 28 Transmit Request Reset */
-#define                    nTRR28  0x0       
 #define                     TRR29  0x2000     /* Mailbox 29 Transmit Request Reset */
-#define                    nTRR29  0x0       
 #define                     TRR30  0x4000     /* Mailbox 30 Transmit Request Reset */
-#define                    nTRR30  0x0       
 #define                     TRR31  0x8000     /* Mailbox 31 Transmit Request Reset */
-#define                    nTRR31  0x0       
 
 /* Bit masks for CAN0_AA1 */
 
 #define                       AA0  0x1        /* Mailbox 0 Abort Acknowledge */
-#define                      nAA0  0x0       
 #define                       AA1  0x2        /* Mailbox 1 Abort Acknowledge */
-#define                      nAA1  0x0       
 #define                       AA2  0x4        /* Mailbox 2 Abort Acknowledge */
-#define                      nAA2  0x0       
 #define                       AA3  0x8        /* Mailbox 3 Abort Acknowledge */
-#define                      nAA3  0x0       
 #define                       AA4  0x10       /* Mailbox 4 Abort Acknowledge */
-#define                      nAA4  0x0       
 #define                       AA5  0x20       /* Mailbox 5 Abort Acknowledge */
-#define                      nAA5  0x0       
 #define                       AA6  0x40       /* Mailbox 6 Abort Acknowledge */
-#define                      nAA6  0x0       
 #define                       AA7  0x80       /* Mailbox 7 Abort Acknowledge */
-#define                      nAA7  0x0       
 #define                       AA8  0x100      /* Mailbox 8 Abort Acknowledge */
-#define                      nAA8  0x0       
 #define                       AA9  0x200      /* Mailbox 9 Abort Acknowledge */
-#define                      nAA9  0x0       
 #define                      AA10  0x400      /* Mailbox 10 Abort Acknowledge */
-#define                     nAA10  0x0       
 #define                      AA11  0x800      /* Mailbox 11 Abort Acknowledge */
-#define                     nAA11  0x0       
 #define                      AA12  0x1000     /* Mailbox 12 Abort Acknowledge */
-#define                     nAA12  0x0       
 #define                      AA13  0x2000     /* Mailbox 13 Abort Acknowledge */
-#define                     nAA13  0x0       
 #define                      AA14  0x4000     /* Mailbox 14 Abort Acknowledge */
-#define                     nAA14  0x0       
 #define                      AA15  0x8000     /* Mailbox 15 Abort Acknowledge */
-#define                     nAA15  0x0       
 
 /* Bit masks for CAN0_AA2 */
 
 #define                      AA16  0x1        /* Mailbox 16 Abort Acknowledge */
-#define                     nAA16  0x0       
 #define                      AA17  0x2        /* Mailbox 17 Abort Acknowledge */
-#define                     nAA17  0x0       
 #define                      AA18  0x4        /* Mailbox 18 Abort Acknowledge */
-#define                     nAA18  0x0       
 #define                      AA19  0x8        /* Mailbox 19 Abort Acknowledge */
-#define                     nAA19  0x0       
 #define                      AA20  0x10       /* Mailbox 20 Abort Acknowledge */
-#define                     nAA20  0x0       
 #define                      AA21  0x20       /* Mailbox 21 Abort Acknowledge */
-#define                     nAA21  0x0       
 #define                      AA22  0x40       /* Mailbox 22 Abort Acknowledge */
-#define                     nAA22  0x0       
 #define                      AA23  0x80       /* Mailbox 23 Abort Acknowledge */
-#define                     nAA23  0x0       
 #define                      AA24  0x100      /* Mailbox 24 Abort Acknowledge */
-#define                     nAA24  0x0       
 #define                      AA25  0x200      /* Mailbox 25 Abort Acknowledge */
-#define                     nAA25  0x0       
 #define                      AA26  0x400      /* Mailbox 26 Abort Acknowledge */
-#define                     nAA26  0x0       
 #define                      AA27  0x800      /* Mailbox 27 Abort Acknowledge */
-#define                     nAA27  0x0       
 #define                      AA28  0x1000     /* Mailbox 28 Abort Acknowledge */
-#define                     nAA28  0x0       
 #define                      AA29  0x2000     /* Mailbox 29 Abort Acknowledge */
-#define                     nAA29  0x0       
 #define                      AA30  0x4000     /* Mailbox 30 Abort Acknowledge */
-#define                     nAA30  0x0       
 #define                      AA31  0x8000     /* Mailbox 31 Abort Acknowledge */
-#define                     nAA31  0x0       
 
 /* Bit masks for CAN0_TA1 */
 
 #define                       TA0  0x1        /* Mailbox 0 Transmit Acknowledge */
-#define                      nTA0  0x0       
 #define                       TA1  0x2        /* Mailbox 1 Transmit Acknowledge */
-#define                      nTA1  0x0       
 #define                       TA2  0x4        /* Mailbox 2 Transmit Acknowledge */
-#define                      nTA2  0x0       
 #define                       TA3  0x8        /* Mailbox 3 Transmit Acknowledge */
-#define                      nTA3  0x0       
 #define                       TA4  0x10       /* Mailbox 4 Transmit Acknowledge */
-#define                      nTA4  0x0       
 #define                       TA5  0x20       /* Mailbox 5 Transmit Acknowledge */
-#define                      nTA5  0x0       
 #define                       TA6  0x40       /* Mailbox 6 Transmit Acknowledge */
-#define                      nTA6  0x0       
 #define                       TA7  0x80       /* Mailbox 7 Transmit Acknowledge */
-#define                      nTA7  0x0       
 #define                       TA8  0x100      /* Mailbox 8 Transmit Acknowledge */
-#define                      nTA8  0x0       
 #define                       TA9  0x200      /* Mailbox 9 Transmit Acknowledge */
-#define                      nTA9  0x0       
 #define                      TA10  0x400      /* Mailbox 10 Transmit Acknowledge */
-#define                     nTA10  0x0       
 #define                      TA11  0x800      /* Mailbox 11 Transmit Acknowledge */
-#define                     nTA11  0x0       
 #define                      TA12  0x1000     /* Mailbox 12 Transmit Acknowledge */
-#define                     nTA12  0x0       
 #define                      TA13  0x2000     /* Mailbox 13 Transmit Acknowledge */
-#define                     nTA13  0x0       
 #define                      TA14  0x4000     /* Mailbox 14 Transmit Acknowledge */
-#define                     nTA14  0x0       
 #define                      TA15  0x8000     /* Mailbox 15 Transmit Acknowledge */
-#define                     nTA15  0x0       
 
 /* Bit masks for CAN0_TA2 */
 
 #define                      TA16  0x1        /* Mailbox 16 Transmit Acknowledge */
-#define                     nTA16  0x0       
 #define                      TA17  0x2        /* Mailbox 17 Transmit Acknowledge */
-#define                     nTA17  0x0       
 #define                      TA18  0x4        /* Mailbox 18 Transmit Acknowledge */
-#define                     nTA18  0x0       
 #define                      TA19  0x8        /* Mailbox 19 Transmit Acknowledge */
-#define                     nTA19  0x0       
 #define                      TA20  0x10       /* Mailbox 20 Transmit Acknowledge */
-#define                     nTA20  0x0       
 #define                      TA21  0x20       /* Mailbox 21 Transmit Acknowledge */
-#define                     nTA21  0x0       
 #define                      TA22  0x40       /* Mailbox 22 Transmit Acknowledge */
-#define                     nTA22  0x0       
 #define                      TA23  0x80       /* Mailbox 23 Transmit Acknowledge */
-#define                     nTA23  0x0       
 #define                      TA24  0x100      /* Mailbox 24 Transmit Acknowledge */
-#define                     nTA24  0x0       
 #define                      TA25  0x200      /* Mailbox 25 Transmit Acknowledge */
-#define                     nTA25  0x0       
 #define                      TA26  0x400      /* Mailbox 26 Transmit Acknowledge */
-#define                     nTA26  0x0       
 #define                      TA27  0x800      /* Mailbox 27 Transmit Acknowledge */
-#define                     nTA27  0x0       
 #define                      TA28  0x1000     /* Mailbox 28 Transmit Acknowledge */
-#define                     nTA28  0x0       
 #define                      TA29  0x2000     /* Mailbox 29 Transmit Acknowledge */
-#define                     nTA29  0x0       
 #define                      TA30  0x4000     /* Mailbox 30 Transmit Acknowledge */
-#define                     nTA30  0x0       
 #define                      TA31  0x8000     /* Mailbox 31 Transmit Acknowledge */
-#define                     nTA31  0x0       
 
 /* Bit masks for CAN0_RFH1 */
 
 #define                      RFH0  0x1        /* Mailbox 0 Remote Frame Handling Enable */
-#define                     nRFH0  0x0       
 #define                      RFH1  0x2        /* Mailbox 1 Remote Frame Handling Enable */
-#define                     nRFH1  0x0       
 #define                      RFH2  0x4        /* Mailbox 2 Remote Frame Handling Enable */
-#define                     nRFH2  0x0       
 #define                      RFH3  0x8        /* Mailbox 3 Remote Frame Handling Enable */
-#define                     nRFH3  0x0       
 #define                      RFH4  0x10       /* Mailbox 4 Remote Frame Handling Enable */
-#define                     nRFH4  0x0       
 #define                      RFH5  0x20       /* Mailbox 5 Remote Frame Handling Enable */
-#define                     nRFH5  0x0       
 #define                      RFH6  0x40       /* Mailbox 6 Remote Frame Handling Enable */
-#define                     nRFH6  0x0       
 #define                      RFH7  0x80       /* Mailbox 7 Remote Frame Handling Enable */
-#define                     nRFH7  0x0       
 #define                      RFH8  0x100      /* Mailbox 8 Remote Frame Handling Enable */
-#define                     nRFH8  0x0       
 #define                      RFH9  0x200      /* Mailbox 9 Remote Frame Handling Enable */
-#define                     nRFH9  0x0       
 #define                     RFH10  0x400      /* Mailbox 10 Remote Frame Handling Enable */
-#define                    nRFH10  0x0       
 #define                     RFH11  0x800      /* Mailbox 11 Remote Frame Handling Enable */
-#define                    nRFH11  0x0       
 #define                     RFH12  0x1000     /* Mailbox 12 Remote Frame Handling Enable */
-#define                    nRFH12  0x0       
 #define                     RFH13  0x2000     /* Mailbox 13 Remote Frame Handling Enable */
-#define                    nRFH13  0x0       
 #define                     RFH14  0x4000     /* Mailbox 14 Remote Frame Handling Enable */
-#define                    nRFH14  0x0       
 #define                     RFH15  0x8000     /* Mailbox 15 Remote Frame Handling Enable */
-#define                    nRFH15  0x0       
 
 /* Bit masks for CAN0_RFH2 */
 
 #define                     RFH16  0x1        /* Mailbox 16 Remote Frame Handling Enable */
-#define                    nRFH16  0x0       
 #define                     RFH17  0x2        /* Mailbox 17 Remote Frame Handling Enable */
-#define                    nRFH17  0x0       
 #define                     RFH18  0x4        /* Mailbox 18 Remote Frame Handling Enable */
-#define                    nRFH18  0x0       
 #define                     RFH19  0x8        /* Mailbox 19 Remote Frame Handling Enable */
-#define                    nRFH19  0x0       
 #define                     RFH20  0x10       /* Mailbox 20 Remote Frame Handling Enable */
-#define                    nRFH20  0x0       
 #define                     RFH21  0x20       /* Mailbox 21 Remote Frame Handling Enable */
-#define                    nRFH21  0x0       
 #define                     RFH22  0x40       /* Mailbox 22 Remote Frame Handling Enable */
-#define                    nRFH22  0x0       
 #define                     RFH23  0x80       /* Mailbox 23 Remote Frame Handling Enable */
-#define                    nRFH23  0x0       
 #define                     RFH24  0x100      /* Mailbox 24 Remote Frame Handling Enable */
-#define                    nRFH24  0x0       
 #define                     RFH25  0x200      /* Mailbox 25 Remote Frame Handling Enable */
-#define                    nRFH25  0x0       
 #define                     RFH26  0x400      /* Mailbox 26 Remote Frame Handling Enable */
-#define                    nRFH26  0x0       
 #define                     RFH27  0x800      /* Mailbox 27 Remote Frame Handling Enable */
-#define                    nRFH27  0x0       
 #define                     RFH28  0x1000     /* Mailbox 28 Remote Frame Handling Enable */
-#define                    nRFH28  0x0       
 #define                     RFH29  0x2000     /* Mailbox 29 Remote Frame Handling Enable */
-#define                    nRFH29  0x0       
 #define                     RFH30  0x4000     /* Mailbox 30 Remote Frame Handling Enable */
-#define                    nRFH30  0x0       
 #define                     RFH31  0x8000     /* Mailbox 31 Remote Frame Handling Enable */
-#define                    nRFH31  0x0       
 
 /* Bit masks for CAN0_MBIM1 */
 
 #define                     MBIM0  0x1        /* Mailbox 0 Mailbox Interrupt Mask */
-#define                    nMBIM0  0x0       
 #define                     MBIM1  0x2        /* Mailbox 1 Mailbox Interrupt Mask */
-#define                    nMBIM1  0x0       
 #define                     MBIM2  0x4        /* Mailbox 2 Mailbox Interrupt Mask */
-#define                    nMBIM2  0x0       
 #define                     MBIM3  0x8        /* Mailbox 3 Mailbox Interrupt Mask */
-#define                    nMBIM3  0x0       
 #define                     MBIM4  0x10       /* Mailbox 4 Mailbox Interrupt Mask */
-#define                    nMBIM4  0x0       
 #define                     MBIM5  0x20       /* Mailbox 5 Mailbox Interrupt Mask */
-#define                    nMBIM5  0x0       
 #define                     MBIM6  0x40       /* Mailbox 6 Mailbox Interrupt Mask */
-#define                    nMBIM6  0x0       
 #define                     MBIM7  0x80       /* Mailbox 7 Mailbox Interrupt Mask */
-#define                    nMBIM7  0x0       
 #define                     MBIM8  0x100      /* Mailbox 8 Mailbox Interrupt Mask */
-#define                    nMBIM8  0x0       
 #define                     MBIM9  0x200      /* Mailbox 9 Mailbox Interrupt Mask */
-#define                    nMBIM9  0x0       
 #define                    MBIM10  0x400      /* Mailbox 10 Mailbox Interrupt Mask */
-#define                   nMBIM10  0x0       
 #define                    MBIM11  0x800      /* Mailbox 11 Mailbox Interrupt Mask */
-#define                   nMBIM11  0x0       
 #define                    MBIM12  0x1000     /* Mailbox 12 Mailbox Interrupt Mask */
-#define                   nMBIM12  0x0       
 #define                    MBIM13  0x2000     /* Mailbox 13 Mailbox Interrupt Mask */
-#define                   nMBIM13  0x0       
 #define                    MBIM14  0x4000     /* Mailbox 14 Mailbox Interrupt Mask */
-#define                   nMBIM14  0x0       
 #define                    MBIM15  0x8000     /* Mailbox 15 Mailbox Interrupt Mask */
-#define                   nMBIM15  0x0       
 
 /* Bit masks for CAN0_MBIM2 */
 
 #define                    MBIM16  0x1        /* Mailbox 16 Mailbox Interrupt Mask */
-#define                   nMBIM16  0x0       
 #define                    MBIM17  0x2        /* Mailbox 17 Mailbox Interrupt Mask */
-#define                   nMBIM17  0x0       
 #define                    MBIM18  0x4        /* Mailbox 18 Mailbox Interrupt Mask */
-#define                   nMBIM18  0x0       
 #define                    MBIM19  0x8        /* Mailbox 19 Mailbox Interrupt Mask */
-#define                   nMBIM19  0x0       
 #define                    MBIM20  0x10       /* Mailbox 20 Mailbox Interrupt Mask */
-#define                   nMBIM20  0x0       
 #define                    MBIM21  0x20       /* Mailbox 21 Mailbox Interrupt Mask */
-#define                   nMBIM21  0x0       
 #define                    MBIM22  0x40       /* Mailbox 22 Mailbox Interrupt Mask */
-#define                   nMBIM22  0x0       
 #define                    MBIM23  0x80       /* Mailbox 23 Mailbox Interrupt Mask */
-#define                   nMBIM23  0x0       
 #define                    MBIM24  0x100      /* Mailbox 24 Mailbox Interrupt Mask */
-#define                   nMBIM24  0x0       
 #define                    MBIM25  0x200      /* Mailbox 25 Mailbox Interrupt Mask */
-#define                   nMBIM25  0x0       
 #define                    MBIM26  0x400      /* Mailbox 26 Mailbox Interrupt Mask */
-#define                   nMBIM26  0x0       
 #define                    MBIM27  0x800      /* Mailbox 27 Mailbox Interrupt Mask */
-#define                   nMBIM27  0x0       
 #define                    MBIM28  0x1000     /* Mailbox 28 Mailbox Interrupt Mask */
-#define                   nMBIM28  0x0       
 #define                    MBIM29  0x2000     /* Mailbox 29 Mailbox Interrupt Mask */
-#define                   nMBIM29  0x0       
 #define                    MBIM30  0x4000     /* Mailbox 30 Mailbox Interrupt Mask */
-#define                   nMBIM30  0x0       
 #define                    MBIM31  0x8000     /* Mailbox 31 Mailbox Interrupt Mask */
-#define                   nMBIM31  0x0       
 
 /* Bit masks for CAN0_MBTIF1 */
 
 #define                    MBTIF0  0x1        /* Mailbox 0 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF0  0x0       
 #define                    MBTIF1  0x2        /* Mailbox 1 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF1  0x0       
 #define                    MBTIF2  0x4        /* Mailbox 2 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF2  0x0       
 #define                    MBTIF3  0x8        /* Mailbox 3 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF3  0x0       
 #define                    MBTIF4  0x10       /* Mailbox 4 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF4  0x0       
 #define                    MBTIF5  0x20       /* Mailbox 5 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF5  0x0       
 #define                    MBTIF6  0x40       /* Mailbox 6 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF6  0x0       
 #define                    MBTIF7  0x80       /* Mailbox 7 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF7  0x0       
 #define                    MBTIF8  0x100      /* Mailbox 8 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF8  0x0       
 #define                    MBTIF9  0x200      /* Mailbox 9 Mailbox Transmit Interrupt Flag */
-#define                   nMBTIF9  0x0       
 #define                   MBTIF10  0x400      /* Mailbox 10 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF10  0x0       
 #define                   MBTIF11  0x800      /* Mailbox 11 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF11  0x0       
 #define                   MBTIF12  0x1000     /* Mailbox 12 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF12  0x0       
 #define                   MBTIF13  0x2000     /* Mailbox 13 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF13  0x0       
 #define                   MBTIF14  0x4000     /* Mailbox 14 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF14  0x0       
 #define                   MBTIF15  0x8000     /* Mailbox 15 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF15  0x0       
 
 /* Bit masks for CAN0_MBTIF2 */
 
 #define                   MBTIF16  0x1        /* Mailbox 16 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF16  0x0       
 #define                   MBTIF17  0x2        /* Mailbox 17 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF17  0x0       
 #define                   MBTIF18  0x4        /* Mailbox 18 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF18  0x0       
 #define                   MBTIF19  0x8        /* Mailbox 19 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF19  0x0       
 #define                   MBTIF20  0x10       /* Mailbox 20 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF20  0x0       
 #define                   MBTIF21  0x20       /* Mailbox 21 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF21  0x0       
 #define                   MBTIF22  0x40       /* Mailbox 22 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF22  0x0       
 #define                   MBTIF23  0x80       /* Mailbox 23 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF23  0x0       
 #define                   MBTIF24  0x100      /* Mailbox 24 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF24  0x0       
 #define                   MBTIF25  0x200      /* Mailbox 25 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF25  0x0       
 #define                   MBTIF26  0x400      /* Mailbox 26 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF26  0x0       
 #define                   MBTIF27  0x800      /* Mailbox 27 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF27  0x0       
 #define                   MBTIF28  0x1000     /* Mailbox 28 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF28  0x0       
 #define                   MBTIF29  0x2000     /* Mailbox 29 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF29  0x0       
 #define                   MBTIF30  0x4000     /* Mailbox 30 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF30  0x0       
 #define                   MBTIF31  0x8000     /* Mailbox 31 Mailbox Transmit Interrupt Flag */
-#define                  nMBTIF31  0x0       
 
 /* Bit masks for CAN0_MBRIF1 */
 
 #define                    MBRIF0  0x1        /* Mailbox 0 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF0  0x0       
 #define                    MBRIF1  0x2        /* Mailbox 1 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF1  0x0       
 #define                    MBRIF2  0x4        /* Mailbox 2 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF2  0x0       
 #define                    MBRIF3  0x8        /* Mailbox 3 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF3  0x0       
 #define                    MBRIF4  0x10       /* Mailbox 4 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF4  0x0       
 #define                    MBRIF5  0x20       /* Mailbox 5 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF5  0x0       
 #define                    MBRIF6  0x40       /* Mailbox 6 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF6  0x0       
 #define                    MBRIF7  0x80       /* Mailbox 7 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF7  0x0       
 #define                    MBRIF8  0x100      /* Mailbox 8 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF8  0x0       
 #define                    MBRIF9  0x200      /* Mailbox 9 Mailbox Receive Interrupt Flag */
-#define                   nMBRIF9  0x0       
 #define                   MBRIF10  0x400      /* Mailbox 10 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF10  0x0       
 #define                   MBRIF11  0x800      /* Mailbox 11 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF11  0x0       
 #define                   MBRIF12  0x1000     /* Mailbox 12 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF12  0x0       
 #define                   MBRIF13  0x2000     /* Mailbox 13 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF13  0x0       
 #define                   MBRIF14  0x4000     /* Mailbox 14 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF14  0x0       
 #define                   MBRIF15  0x8000     /* Mailbox 15 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF15  0x0       
 
 /* Bit masks for CAN0_MBRIF2 */
 
 #define                   MBRIF16  0x1        /* Mailbox 16 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF16  0x0       
 #define                   MBRIF17  0x2        /* Mailbox 17 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF17  0x0       
 #define                   MBRIF18  0x4        /* Mailbox 18 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF18  0x0       
 #define                   MBRIF19  0x8        /* Mailbox 19 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF19  0x0       
 #define                   MBRIF20  0x10       /* Mailbox 20 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF20  0x0       
 #define                   MBRIF21  0x20       /* Mailbox 21 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF21  0x0       
 #define                   MBRIF22  0x40       /* Mailbox 22 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF22  0x0       
 #define                   MBRIF23  0x80       /* Mailbox 23 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF23  0x0       
 #define                   MBRIF24  0x100      /* Mailbox 24 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF24  0x0       
 #define                   MBRIF25  0x200      /* Mailbox 25 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF25  0x0       
 #define                   MBRIF26  0x400      /* Mailbox 26 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF26  0x0       
 #define                   MBRIF27  0x800      /* Mailbox 27 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF27  0x0       
 #define                   MBRIF28  0x1000     /* Mailbox 28 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF28  0x0       
 #define                   MBRIF29  0x2000     /* Mailbox 29 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF29  0x0       
 #define                   MBRIF30  0x4000     /* Mailbox 30 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF30  0x0       
 #define                   MBRIF31  0x8000     /* Mailbox 31 Mailbox Receive Interrupt Flag */
-#define                  nMBRIF31  0x0       
 
 /* Bit masks for EPPIx_STATUS */
 
 #define                 CFIFO_ERR  0x1        /* Chroma FIFO Error */
-#define                nCFIFO_ERR  0x0       
 #define                 YFIFO_ERR  0x2        /* Luma FIFO Error */
-#define                nYFIFO_ERR  0x0       
 #define                 LTERR_OVR  0x4        /* Line Track Overflow */
-#define                nLTERR_OVR  0x0       
 #define                LTERR_UNDR  0x8        /* Line Track Underflow */
-#define               nLTERR_UNDR  0x0       
 #define                 FTERR_OVR  0x10       /* Frame Track Overflow */
-#define                nFTERR_OVR  0x0       
 #define                FTERR_UNDR  0x20       /* Frame Track Underflow */
-#define               nFTERR_UNDR  0x0       
 #define                  ERR_NCOR  0x40       /* Preamble Error Not Corrected */
-#define                 nERR_NCOR  0x0       
 #define                   DMA1URQ  0x80       /* DMA1 Urgent Request */
-#define                  nDMA1URQ  0x0       
 #define                   DMA0URQ  0x100      /* DMA0 Urgent Request */
-#define                  nDMA0URQ  0x0       
 #define                   ERR_DET  0x4000     /* Preamble Error Detected */
-#define                  nERR_DET  0x0       
 #define                       FLD  0x8000     /* Field */
-#define                      nFLD  0x0       
 
 /* Bit masks for EPPIx_CONTROL */
 
 #define                   EPPI_EN  0x1        /* Enable */
-#define                  nEPPI_EN  0x0       
 #define                  EPPI_DIR  0x2        /* Direction */
-#define                 nEPPI_DIR  0x0       
 #define                  XFR_TYPE  0xc        /* Operating Mode */
 #define                    FS_CFG  0x30       /* Frame Sync Configuration */
 #define                   FLD_SEL  0x40       /* Field Select/Trigger */
-#define                  nFLD_SEL  0x0       
 #define                  ITU_TYPE  0x80       /* ITU Interlaced or Progressive */
-#define                 nITU_TYPE  0x0       
 #define                  BLANKGEN  0x100      /* ITU Output Mode with Internal Blanking Generation */
-#define                 nBLANKGEN  0x0       
 #define                   ICLKGEN  0x200      /* Internal Clock Generation */
-#define                  nICLKGEN  0x0       
 #define                    IFSGEN  0x400      /* Internal Frame Sync Generation */
-#define                   nIFSGEN  0x0       
 #define                      POLC  0x1800     /* Frame Sync and Data Driving/Sampling Edges */
 #define                      POLS  0x6000     /* Frame Sync Polarity */
 #define                   DLENGTH  0x38000    /* Data Length */
 #define                   SKIP_EN  0x40000    /* Skip Enable */
-#define                  nSKIP_EN  0x0       
 #define                   SKIP_EO  0x80000    /* Skip Even or Odd */
-#define                  nSKIP_EO  0x0       
 #define                    PACKEN  0x100000   /* Packing/Unpacking Enable */
-#define                   nPACKEN  0x0       
 #define                    SWAPEN  0x200000   /* Swap Enable */
-#define                   nSWAPEN  0x0       
 #define                  SIGN_EXT  0x400000   /* Sign Extension or Zero-filled / Data Split Format */
-#define                 nSIGN_EXT  0x0       
 #define             SPLT_EVEN_ODD  0x800000   /* Split Even and Odd Data Samples */
-#define            nSPLT_EVEN_ODD  0x0       
 #define               SUBSPLT_ODD  0x1000000  /* Sub-split Odd Samples */
-#define              nSUBSPLT_ODD  0x0       
 #define                    DMACFG  0x2000000  /* One or Two DMA Channels Mode */
-#define                   nDMACFG  0x0       
 #define                RGB_FMT_EN  0x4000000  /* RGB Formatting Enable */
-#define               nRGB_FMT_EN  0x0       
 #define                  FIFO_RWM  0x18000000 /* FIFO Regular Watermarks */
 #define                  FIFO_UWM  0x60000000 /* FIFO Urgent Watermarks */
 
@@ -3951,60 +3076,36 @@
 /* Bit masks for SPIx_CTL */
 
 #define                       SPE  0x4000     /* SPI Enable */
-#define                      nSPE  0x0       
 #define                       WOM  0x2000     /* Write Open Drain Master */
-#define                      nWOM  0x0       
 #define                      MSTR  0x1000     /* Master Mode */
-#define                     nMSTR  0x0       
 #define                      CPOL  0x800      /* Clock Polarity */
-#define                     nCPOL  0x0       
 #define                      CPHA  0x400      /* Clock Phase */
-#define                     nCPHA  0x0       
 #define                      LSBF  0x200      /* LSB First */
-#define                     nLSBF  0x0       
 #define                      SIZE  0x100      /* Size of Words */
-#define                     nSIZE  0x0       
 #define                     EMISO  0x20       /* Enable MISO Output */
-#define                    nEMISO  0x0       
 #define                      PSSE  0x10       /* Slave-Select Enable */
-#define                     nPSSE  0x0       
 #define                        GM  0x8        /* Get More Data */
-#define                       nGM  0x0       
 #define                        SZ  0x4        /* Send Zero */
-#define                       nSZ  0x0       
 #define                     TIMOD  0x3        /* Transfer Initiation Mode */
 
 /* Bit masks for SPIx_FLG */
 
 #define                      FLS1  0x2        /* Slave Select Enable 1 */
-#define                     nFLS1  0x0       
 #define                      FLS2  0x4        /* Slave Select Enable 2 */
-#define                     nFLS2  0x0       
 #define                      FLS3  0x8        /* Slave Select Enable 3 */
-#define                     nFLS3  0x0       
 #define                      FLG1  0x200      /* Slave Select Value 1 */
-#define                     nFLG1  0x0       
 #define                      FLG2  0x400      /* Slave Select Value 2 */
-#define                     nFLG2  0x0       
 #define                      FLG3  0x800      /* Slave Select Value 3 */
-#define                     nFLG3  0x0       
 
 /* Bit masks for SPIx_STAT */
 
 #define                     TXCOL  0x40       /* Transmit Collision Error */
-#define                    nTXCOL  0x0       
 #define                       RXS  0x20       /* RDBR Data Buffer Status */
-#define                      nRXS  0x0       
 #define                      RBSY  0x10       /* Receive Error */
-#define                     nRBSY  0x0       
 #define                       TXS  0x8        /* TDBR Data Buffer Status */
-#define                      nTXS  0x0       
 #define                       TXE  0x4        /* Transmission Error */
-#define                      nTXE  0x0       
 #define                      MODF  0x2        /* Mode Fault Error */
-#define                     nMODF  0x0       
 #define                      SPIF  0x1        /* SPI Finished */
-#define                     nSPIF  0x0       
 
 /* Bit masks for SPIx_TDBR */
 
@@ -4028,9 +3129,7 @@
 
 #define                  PRESCALE  0x7f       /* Prescale Value */
 #define                   TWI_ENA  0x80       /* TWI Enable */
-#define                  nTWI_ENA  0x0       
 #define                      SCCB  0x200      /* Serial Camera Control Bus */
-#define                     nSCCB  0x0       
 
 /* Bit maskes for TWIx_CLKDIV */
 
@@ -4040,13 +3139,9 @@
 /* Bit maskes for TWIx_SLAVE_CTL */
 
 #define                       SEN  0x1        /* Slave Enable */
-#define                      nSEN  0x0       
 #define                    STDVAL  0x4        /* Slave Transmit Data Valid */
-#define                   nSTDVAL  0x0       
 #define                       NAK  0x8        /* Not Acknowledge */
-#define                      nNAK  0x0       
 #define                       GEN  0x10       /* General Call Enable */
-#define                      nGEN  0x0       
 
 /* Bit maskes for TWIx_SLAVE_ADDR */
 
@@ -4055,27 +3150,18 @@
 /* Bit maskes for TWIx_SLAVE_STAT */
 
 #define                      SDIR  0x1        /* Slave Transfer Direction */
-#define                     nSDIR  0x0       
 #define                     GCALL  0x2        /* General Call */
-#define                    nGCALL  0x0       
 
 /* Bit maskes for TWIx_MASTER_CTL */
 
 #define                       MEN  0x1        /* Master Mode Enable */
-#define                      nMEN  0x0       
 #define                      MDIR  0x4        /* Master Transfer Direction */
-#define                     nMDIR  0x0       
 #define                      FAST  0x8        /* Fast Mode */
-#define                     nFAST  0x0       
 #define                      STOP  0x10       /* Issue Stop Condition */
-#define                     nSTOP  0x0       
 #define                    RSTART  0x20       /* Repeat Start */
-#define                   nRSTART  0x0       
 #define                      DCNT  0x3fc0     /* Data Transfer Count */
 #define                    SDAOVR  0x4000     /* Serial Data Override */
-#define                   nSDAOVR  0x0       
 #define                    SCLOVR  0x8000     /* Serial Clock Override */
-#define                   nSCLOVR  0x0       
 
 /* Bit maskes for TWIx_MASTER_ADDR */
 
@@ -4084,34 +3170,21 @@
 /* Bit maskes for TWIx_MASTER_STAT */
 
 #define                     MPROG  0x1        /* Master Transfer in Progress */
-#define                    nMPROG  0x0       
 #define                   LOSTARB  0x2        /* Lost Arbitration */
-#define                  nLOSTARB  0x0       
 #define                      ANAK  0x4        /* Address Not Acknowledged */
-#define                     nANAK  0x0       
 #define                      DNAK  0x8        /* Data Not Acknowledged */
-#define                     nDNAK  0x0       
 #define                  BUFRDERR  0x10       /* Buffer Read Error */
-#define                 nBUFRDERR  0x0       
 #define                  BUFWRERR  0x20       /* Buffer Write Error */
-#define                 nBUFWRERR  0x0       
 #define                    SDASEN  0x40       /* Serial Data Sense */
-#define                   nSDASEN  0x0       
 #define                    SCLSEN  0x80       /* Serial Clock Sense */
-#define                   nSCLSEN  0x0       
 #define                   BUSBUSY  0x100      /* Bus Busy */
-#define                  nBUSBUSY  0x0       
 
 /* Bit maskes for TWIx_FIFO_CTL */
 
 #define                  XMTFLUSH  0x1        /* Transmit Buffer Flush */
-#define                 nXMTFLUSH  0x0       
 #define                  RCVFLUSH  0x2        /* Receive Buffer Flush */
-#define                 nRCVFLUSH  0x0       
 #define                 XMTINTLEN  0x4        /* Transmit Buffer Interrupt Length */
-#define                nXMTINTLEN  0x0       
 #define                 RCVINTLEN  0x8        /* Receive Buffer Interrupt Length */
-#define                nRCVINTLEN  0x0       
 
 /* Bit maskes for TWIx_FIFO_STAT */
 
@@ -4121,40 +3194,24 @@
 /* Bit maskes for TWIx_INT_MASK */
 
 #define                    SINITM  0x1        /* Slave Transfer Initiated Interrupt Mask */
-#define                   nSINITM  0x0       
 #define                    SCOMPM  0x2        /* Slave Transfer Complete Interrupt Mask */
-#define                   nSCOMPM  0x0       
 #define                     SERRM  0x4        /* Slave Transfer Error Interrupt Mask */
-#define                    nSERRM  0x0       
 #define                     SOVFM  0x8        /* Slave Overflow Interrupt Mask */
-#define                    nSOVFM  0x0       
 #define                    MCOMPM  0x10       /* Master Transfer Complete Interrupt Mask */
-#define                   nMCOMPM  0x0       
 #define                     MERRM  0x20       /* Master Transfer Error Interrupt Mask */
-#define                    nMERRM  0x0       
 #define                  XMTSERVM  0x40       /* Transmit FIFO Service Interrupt Mask */
-#define                 nXMTSERVM  0x0       
 #define                  RCVSERVM  0x80       /* Receive FIFO Service Interrupt Mask */
-#define                 nRCVSERVM  0x0       
 
 /* Bit maskes for TWIx_INT_STAT */
 
 #define                     SINIT  0x1        /* Slave Transfer Initiated */
-#define                    nSINIT  0x0       
 #define                     SCOMP  0x2        /* Slave Transfer Complete */
-#define                    nSCOMP  0x0       
 #define                      SERR  0x4        /* Slave Transfer Error */
-#define                     nSERR  0x0       
 #define                      SOVF  0x8        /* Slave Overflow */
-#define                     nSOVF  0x0       
 #define                     MCOMP  0x10       /* Master Transfer Complete */
-#define                    nMCOMP  0x0       
 #define                      MERR  0x20       /* Master Transfer Error */
-#define                     nMERR  0x0       
 #define                   XMTSERV  0x40       /* Transmit FIFO Service */
-#define                  nXMTSERV  0x0       
 #define                   RCVSERV  0x80       /* Receive FIFO Service */
-#define                  nRCVSERV  0x0       
 
 /* Bit maskes for TWIx_XMT_DATA8 */
 
@@ -4175,81 +3232,51 @@
 /* Bit masks for SPORTx_TCR1 */
 
 #define                     TCKFE  0x4000     /* Clock Falling Edge Select */
-#define                    nTCKFE  0x0       
 #define                     LATFS  0x2000     /* Late Transmit Frame Sync */
-#define                    nLATFS  0x0       
 #define                      LTFS  0x1000     /* Low Transmit Frame Sync Select */
-#define                     nLTFS  0x0       
 #define                     DITFS  0x800      /* Data-Independent Transmit Frame Sync Select */
-#define                    nDITFS  0x0       
 #define                      TFSR  0x400      /* Transmit Frame Sync Required Select */
-#define                     nTFSR  0x0       
 #define                      ITFS  0x200      /* Internal Transmit Frame Sync Select */
-#define                     nITFS  0x0       
 #define                    TLSBIT  0x10       /* Transmit Bit Order */
-#define                   nTLSBIT  0x0       
 #define                    TDTYPE  0xc        /* Data Formatting Type Select */
 #define                     ITCLK  0x2        /* Internal Transmit Clock Select */
-#define                    nITCLK  0x0       
 #define                     TSPEN  0x1        /* Transmit Enable */
-#define                    nTSPEN  0x0       
 
 /* Bit masks for SPORTx_TCR2 */
 
 #define                     TRFST  0x400      /* Left/Right Order */
-#define                    nTRFST  0x0       
 #define                     TSFSE  0x200      /* Transmit Stereo Frame Sync Enable */
-#define                    nTSFSE  0x0       
 #define                      TXSE  0x100      /* TxSEC Enable */
-#define                     nTXSE  0x0       
 #define                    SLEN_T  0x1f       /* SPORT Word Length */
 
 /* Bit masks for SPORTx_RCR1 */
 
 #define                     RCKFE  0x4000     /* Clock Falling Edge Select */
-#define                    nRCKFE  0x0       
 #define                     LARFS  0x2000     /* Late Receive Frame Sync */
-#define                    nLARFS  0x0       
 #define                      LRFS  0x1000     /* Low Receive Frame Sync Select */
-#define                     nLRFS  0x0       
 #define                      RFSR  0x400      /* Receive Frame Sync Required Select */
-#define                     nRFSR  0x0       
 #define                      IRFS  0x200      /* Internal Receive Frame Sync Select */
-#define                     nIRFS  0x0       
 #define                    RLSBIT  0x10       /* Receive Bit Order */
-#define                   nRLSBIT  0x0       
 #define                    RDTYPE  0xc        /* Data Formatting Type Select */
 #define                     IRCLK  0x2        /* Internal Receive Clock Select */
-#define                    nIRCLK  0x0       
 #define                     RSPEN  0x1        /* Receive Enable */
-#define                    nRSPEN  0x0       
 
 /* Bit masks for SPORTx_RCR2 */
 
 #define                     RRFST  0x400      /* Left/Right Order */
-#define                    nRRFST  0x0       
 #define                     RSFSE  0x200      /* Receive Stereo Frame Sync Enable */
-#define                    nRSFSE  0x0       
 #define                      RXSE  0x100      /* RxSEC Enable */
-#define                     nRXSE  0x0       
 #define                    SLEN_R  0x1f       /* SPORT Word Length */
 
 /* Bit masks for SPORTx_STAT */
 
 #define                     TXHRE  0x40       /* Transmit Hold Register Empty */
-#define                    nTXHRE  0x0       
 #define                      TOVF  0x20       /* Sticky Transmit Overflow Status */
-#define                     nTOVF  0x0       
 #define                      TUVF  0x10       /* Sticky Transmit Underflow Status */
-#define                     nTUVF  0x0       
 #define                       TXF  0x8        /* Transmit FIFO Full Status */
-#define                      nTXF  0x0       
 #define                      ROVF  0x4        /* Sticky Receive Overflow Status */
-#define                     nROVF  0x0       
 #define                      RUVF  0x2        /* Sticky Receive Underflow Status */
-#define                     nRUVF  0x0       
 #define                      RXNE  0x1        /* Receive FIFO Not Empty Status */
-#define                     nRXNE  0x0       
 
 /* Bit masks for SPORTx_MCMC1 */
 
@@ -4260,13 +3287,9 @@
 
 #define                       MFD  0xf000     /* Multi channel Frame Delay */
 #define                      FSDR  0x80       /* Frame Sync to Data Relationship */
-#define                     nFSDR  0x0       
 #define                     MCMEM  0x10       /* Multi channel Frame Mode Enable */
-#define                    nMCMEM  0x0       
 #define                   MCDRXPE  0x8        /* Multi channel DMA Receive Packing */
-#define                  nMCDRXPE  0x0       
 #define                   MCDTXPE  0x4        /* Multi channel DMA Transmit Packing */
-#define                  nMCDTXPE  0x0       
 #define                     MCCRM  0x3        /* 2X Clock Recovery Mode */
 
 /* Bit masks for SPORTx_CHNL */
@@ -4280,115 +3303,59 @@
 #define                       WLS  0x3        /* Word Length Select */
 #endif
 #define                       STB  0x4        /* Stop Bits */
-#define                      nSTB  0x0       
 #define                       PEN  0x8        /* Parity Enable */
-#define                      nPEN  0x0       
 #define                       EPS  0x10       /* Even Parity Select */
-#define                      nEPS  0x0       
 #define                       STP  0x20       /* Sticky Parity */
-#define                      nSTP  0x0       
 #define                        SB  0x40       /* Set Break */
-#define                       nSB  0x0       
 
 /* Bit masks for UARTx_MCR */
 
 #define                      XOFF  0x1        /* Transmitter Off */
-#define                     nXOFF  0x0       
 #define                      MRTS  0x2        /* Manual Request To Send */
-#define                     nMRTS  0x0       
 #define                      RFIT  0x4        /* Receive FIFO IRQ Threshold */
-#define                     nRFIT  0x0       
 #define                      RFRT  0x8        /* Receive FIFO RTS Threshold */
-#define                     nRFRT  0x0       
 #define                  LOOP_ENA  0x10       /* Loopback Mode Enable */
-#define                 nLOOP_ENA  0x0       
 #define                     FCPOL  0x20       /* Flow Control Pin Polarity */
-#define                    nFCPOL  0x0       
 #define                      ARTS  0x40       /* Automatic Request To Send */
-#define                     nARTS  0x0       
 #define                      ACTS  0x80       /* Automatic Clear To Send */
-#define                     nACTS  0x0       
 
 /* Bit masks for UARTx_LSR */
 
 #define                        DR  0x1        /* Data Ready */
-#define                       nDR  0x0       
 #define                        OE  0x2        /* Overrun Error */
-#define                       nOE  0x0       
 #define                        PE  0x4        /* Parity Error */
-#define                       nPE  0x0       
 #define                        FE  0x8        /* Framing Error */
-#define                       nFE  0x0       
 #define                        BI  0x10       /* Break Interrupt */
-#define                       nBI  0x0       
 #define                      THRE  0x20       /* THR Empty */
-#define                     nTHRE  0x0       
 #define                      TEMT  0x40       /* Transmitter Empty */
-#define                     nTEMT  0x0       
 #define                       TFI  0x80       /* Transmission Finished Indicator */
-#define                      nTFI  0x0       
 
 /* Bit masks for UARTx_MSR */
 
 #define                      SCTS  0x1        /* Sticky CTS */
-#define                     nSCTS  0x0       
 #define                       CTS  0x10       /* Clear To Send */
-#define                      nCTS  0x0       
 #define                      RFCS  0x20       /* Receive FIFO Count Status */
-#define                     nRFCS  0x0       
-
-/* Bit masks for UARTx_IER_SET */
-
-#define                   ERBFI_S  0x1        /* Enable Receive Buffer Full Interrupt */
-#define                  nERBFI_S  0x0       
-#define                   ETBEI_S  0x2        /* Enable Transmit Buffer Empty Interrupt */
-#define                  nETBEI_S  0x0       
-#define                    ELSI_S  0x4        /* Enable Receive Status Interrupt */
-#define                   nELSI_S  0x0       
-#define                   EDSSI_S  0x8        /* Enable Modem Status Interrupt */
-#define                  nEDSSI_S  0x0       
-#define                  EDTPTI_S  0x10       /* Enable DMA Transmit PIRQ Interrupt */
-#define                 nEDTPTI_S  0x0       
-#define                    ETFI_S  0x20       /* Enable Transmission Finished Interrupt */
-#define                   nETFI_S  0x0       
-#define                   ERFCI_S  0x40       /* Enable Receive FIFO Count Interrupt */
-#define                  nERFCI_S  0x0       
-
-/* Bit masks for UARTx_IER_CLEAR */
-
-#define                   ERBFI_C  0x1        /* Enable Receive Buffer Full Interrupt */
-#define                  nERBFI_C  0x0       
-#define                   ETBEI_C  0x2        /* Enable Transmit Buffer Empty Interrupt */
-#define                  nETBEI_C  0x0       
-#define                    ELSI_C  0x4        /* Enable Receive Status Interrupt */
-#define                   nELSI_C  0x0       
-#define                   EDSSI_C  0x8        /* Enable Modem Status Interrupt */
-#define                  nEDSSI_C  0x0       
-#define                  EDTPTI_C  0x10       /* Enable DMA Transmit PIRQ Interrupt */
-#define                 nEDTPTI_C  0x0       
-#define                    ETFI_C  0x20       /* Enable Transmission Finished Interrupt */
-#define                   nETFI_C  0x0       
-#define                   ERFCI_C  0x40       /* Enable Receive FIFO Count Interrupt */
-#define                  nERFCI_C  0x0       
+
+/* Bit masks for UARTx_IER_SET & UARTx_IER_CLEAR */
+
+#define                   ERBFI  0x1        /* Enable Receive Buffer Full Interrupt */
+#define                   ETBEI  0x2        /* Enable Transmit Buffer Empty Interrupt */
+#define                    ELSI  0x4        /* Enable Receive Status Interrupt */
+#define                   EDSSI  0x8        /* Enable Modem Status Interrupt */
+#define                  EDTPTI  0x10       /* Enable DMA Transmit PIRQ Interrupt */
+#define                    ETFI  0x20       /* Enable Transmission Finished Interrupt */
+#define                   ERFCI  0x40       /* Enable Receive FIFO Count Interrupt */
 
 /* Bit masks for UARTx_GCTL */
 
 #define                      UCEN  0x1        /* UART Enable */
-#define                     nUCEN  0x0       
 #define                      IREN  0x2        /* IrDA Mode Enable */
-#define                     nIREN  0x0       
 #define                     TPOLC  0x4        /* IrDA TX Polarity Change */
-#define                    nTPOLC  0x0       
 #define                     RPOLC  0x8        /* IrDA RX Polarity Change */
-#define                    nRPOLC  0x0       
 #define                       FPE  0x10       /* Force Parity Error */
-#define                      nFPE  0x0       
 #define                       FFE  0x20       /* Force Framing Error */
-#define                      nFFE  0x0       
 #define                      EDBO  0x40       /* Enable Divide-by-One */
-#define                     nEDBO  0x0       
 #define                     EGLSI  0x80       /* Enable Global LS Interrupt */
-#define                    nEGLSI  0x0       
 
 
 /* ******************************************* */
diff --git a/include/asm-blackfin/mach-bf548/dma.h b/include/asm-blackfin/mach-bf548/dma.h
index 5a334c813c7..fcc8b4c34c6 100644
--- a/include/asm-blackfin/mach-bf548/dma.h
+++ b/include/asm-blackfin/mach-bf548/dma.h
@@ -44,7 +44,6 @@
 #define CH_UART1_TX 		9
 #define CH_ATAPI_RX		10
 #define CH_ATAPI_TX		11
-
 #define CH_EPPI0		12
 #define CH_EPPI1		13
 #define CH_EPPI2		14
@@ -58,6 +57,17 @@
 #define CH_SDH			22
 #define CH_SPI2			23
 
-#define MAX_BLACKFIN_DMA_CHANNEL CH_SPI2
+#define CH_MEM_STREAM0_DEST	24
+#define CH_MEM_STREAM0_SRC	25
+#define CH_MEM_STREAM1_DEST	26
+#define CH_MEM_STREAM1_SRC	27
+#define CH_MEM_STREAM2_DEST	28
+#define CH_MEM_STREAM2_SRC	29
+#define CH_MEM_STREAM3_DEST	30
+#define CH_MEM_STREAM3_SRC	31
+
+#define MAX_BLACKFIN_DMA_CHANNEL 32
 
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *base_addr[];
 #endif
diff --git a/include/asm-blackfin/mach-bf548/gpio.h b/include/asm-blackfin/mach-bf548/gpio.h
new file mode 100644
index 00000000000..45289425ce5
--- /dev/null
+++ b/include/asm-blackfin/mach-bf548/gpio.h
@@ -0,0 +1,212 @@
+/*
+ * File:         include/asm-blackfin/mach-bf548/gpio.h
+ * Based on:
+ * Author:	 Michael Hennerich (hennerich@blackfin.uclinux.org)
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+
+
+#define GPIO_PA0	0
+#define GPIO_PA1	1
+#define GPIO_PA2	2
+#define GPIO_PA3	3
+#define GPIO_PA4	4
+#define GPIO_PA5	5
+#define GPIO_PA6	6
+#define GPIO_PA7	7
+#define GPIO_PA8	8
+#define GPIO_PA9	9
+#define GPIO_PA10	10
+#define GPIO_PA11	11
+#define GPIO_PA12	12
+#define GPIO_PA13	13
+#define GPIO_PA14	14
+#define GPIO_PA15	15
+#define GPIO_PB0	16
+#define GPIO_PB1	17
+#define GPIO_PB2	18
+#define GPIO_PB3	19
+#define GPIO_PB4	20
+#define GPIO_PB5	21
+#define GPIO_PB6	22
+#define GPIO_PB7	23
+#define GPIO_PB8	24
+#define GPIO_PB9	25
+#define GPIO_PB10	26
+#define GPIO_PB11	27
+#define GPIO_PB12	28
+#define GPIO_PB13	29
+#define GPIO_PB14	30
+#define GPIO_PB15	31	/* N/A */
+#define GPIO_PC0	32
+#define GPIO_PC1	33
+#define GPIO_PC2	34
+#define GPIO_PC3	35
+#define GPIO_PC4	36
+#define GPIO_PC5	37
+#define GPIO_PC6	38
+#define GPIO_PC7	39
+#define GPIO_PC8	40
+#define GPIO_PC9	41
+#define GPIO_PC10	42
+#define GPIO_PC11	43
+#define GPIO_PC12	44
+#define GPIO_PC13	45
+#define GPIO_PC14	46	/* N/A */
+#define GPIO_PC15	47	/* N/A */
+#define GPIO_PD0	48
+#define GPIO_PD1	49
+#define GPIO_PD2	50
+#define GPIO_PD3	51
+#define GPIO_PD4	52
+#define GPIO_PD5	53
+#define GPIO_PD6	54
+#define GPIO_PD7	55
+#define GPIO_PD8	56
+#define GPIO_PD9	57
+#define GPIO_PD10	58
+#define GPIO_PD11	59
+#define GPIO_PD12	60
+#define GPIO_PD13	61
+#define GPIO_PD14	62
+#define GPIO_PD15	63
+#define GPIO_PE0	64
+#define GPIO_PE1	65
+#define GPIO_PE2	66
+#define GPIO_PE3	67
+#define GPIO_PE4	68
+#define GPIO_PE5	69
+#define GPIO_PE6	70
+#define GPIO_PE7	71
+#define GPIO_PE8	72
+#define GPIO_PE9	73
+#define GPIO_PE10	74
+#define GPIO_PE11	75
+#define GPIO_PE12	76
+#define GPIO_PE13	77
+#define GPIO_PE14	78
+#define GPIO_PE15	79
+#define GPIO_PF0	80
+#define GPIO_PF1	81
+#define GPIO_PF2	82
+#define GPIO_PF3	83
+#define GPIO_PF4	84
+#define GPIO_PF5	85
+#define GPIO_PF6	86
+#define GPIO_PF7	87
+#define GPIO_PF8	88
+#define GPIO_PF9	89
+#define GPIO_PF10	90
+#define GPIO_PF11	91
+#define GPIO_PF12	92
+#define GPIO_PF13	93
+#define GPIO_PF14	94
+#define GPIO_PF15	95
+#define GPIO_PG0	96
+#define GPIO_PG1	97
+#define GPIO_PG2	98
+#define GPIO_PG3	99
+#define GPIO_PG4	100
+#define GPIO_PG5	101
+#define GPIO_PG6	102
+#define GPIO_PG7	103
+#define GPIO_PG8	104
+#define GPIO_PG9	105
+#define GPIO_PG10	106
+#define GPIO_PG11	107
+#define GPIO_PG12	108
+#define GPIO_PG13	109
+#define GPIO_PG14	110
+#define GPIO_PG15	111
+#define GPIO_PH0	112
+#define GPIO_PH1	113
+#define GPIO_PH2	114
+#define GPIO_PH3	115
+#define GPIO_PH4	116
+#define GPIO_PH5	117
+#define GPIO_PH6	118
+#define GPIO_PH7	119
+#define GPIO_PH8	120
+#define GPIO_PH9	121
+#define GPIO_PH10	122
+#define GPIO_PH11	123
+#define GPIO_PH12	124
+#define GPIO_PH13	125
+#define GPIO_PH14	126	/* N/A */
+#define GPIO_PH15	127	/* N/A */
+#define GPIO_PI0	128
+#define GPIO_PI1	129
+#define GPIO_PI2	130
+#define GPIO_PI3	131
+#define GPIO_PI4	132
+#define GPIO_PI5	133
+#define GPIO_PI6	134
+#define GPIO_PI7	135
+#define GPIO_PI8	136
+#define GPIO_PI9	137
+#define GPIO_PI10	138
+#define GPIO_PI11	139
+#define GPIO_PI12	140
+#define GPIO_PI13	141
+#define GPIO_PI14	142
+#define GPIO_PI15	143
+#define GPIO_PJ0	144
+#define GPIO_PJ1	145
+#define GPIO_PJ2	146
+#define GPIO_PJ3	147
+#define GPIO_PJ4	148
+#define GPIO_PJ5	149
+#define GPIO_PJ6	150
+#define GPIO_PJ7	151
+#define GPIO_PJ8	152
+#define GPIO_PJ9	153
+#define GPIO_PJ10	154
+#define GPIO_PJ11	155
+#define GPIO_PJ12	156
+#define GPIO_PJ13	157
+#define GPIO_PJ14	158
+#define GPIO_PJ15	159
+
+#define MAX_BLACKFIN_GPIOS 160
+
+struct gpio_port_t {
+	unsigned short port_fer;
+	unsigned short dummy1;
+	unsigned short port_data;
+	unsigned short dummy2;
+	unsigned short port_set;
+	unsigned short dummy3;
+	unsigned short port_clear;
+	unsigned short dummy4;
+	unsigned short port_dir_set;
+	unsigned short dummy5;
+	unsigned short port_dir_clear;
+	unsigned short dummy6;
+	unsigned short port_inen;
+	unsigned short dummy7;
+	unsigned int port_mux;
+};
+
diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h
index a7f6703ea1d..93f5db0f465 100644
--- a/include/asm-blackfin/mach-bf548/irq.h
+++ b/include/asm-blackfin/mach-bf548/irq.h
@@ -51,7 +51,7 @@ Events         (highest priority)  EMU         0
                  (lowest priority)  IVG15       32 *
  */
 
-#define NR_PERI_INTS    32
+#define NR_PERI_INTS    (32 * 3)
 
 /* The ABSTRACT IRQ definitions */
 /** the first seven of the following are fixed, the rest you change if you need to **/
@@ -92,7 +92,7 @@ Events         (highest priority)  EMU         0
 #define IRQ_DMAC1_ERR	BFIN_IRQ(24)	/* DMAC1 Status (Error) Interrupt */
 #define IRQ_SPORT2_ERR	BFIN_IRQ(25)	/* SPORT2 Error Interrupt */
 #define IRQ_SPORT3_ERR	BFIN_IRQ(26)	/* SPORT3 Error Interrupt */
-#define IRQ_MXVR	BFIN_IRQ(27)	/* SPORT3 Error Interrupt */
+#define IRQ_MXVR_DATA	BFIN_IRQ(27)	/* MXVR Data Interrupt */
 #define IRQ_SPI1_ERR	BFIN_IRQ(28)	/* SPI1 Status (Error) Interrupt */
 #define IRQ_SPI2_ERR	BFIN_IRQ(29)	/* SPI2 Status (Error) Interrupt */
 #define IRQ_UART1_ERR	BFIN_IRQ(30)	/* UART1 Status (Error) Interrupt */
@@ -102,8 +102,8 @@ Events         (highest priority)  EMU         0
 #define IRQ_SPORT2_TX	BFIN_IRQ(34)	/* SPORT2 TX (DMA19) Interrupt */
 #define IRQ_SPORT3_RX	BFIN_IRQ(35)	/* SPORT3 RX (DMA20) Interrupt */
 #define IRQ_SPORT3_TX	BFIN_IRQ(36)	/* SPORT3 TX (DMA21) Interrupt */
-#define IRQ_EPP1	BFIN_IRQ(37)	/* EPP1 (DMA13) Interrupt */
-#define IRQ_EPP2	BFIN_IRQ(38)	/* EPP2 (DMA14) Interrupt */
+#define IRQ_EPPI1	BFIN_IRQ(37)	/* EPP1 (DMA13) Interrupt */
+#define IRQ_EPPI2	BFIN_IRQ(38)	/* EPP2 (DMA14) Interrupt */
 #define IRQ_SPI1	BFIN_IRQ(39)	/* SPI1 (DMA5) Interrupt */
 #define IRQ_SPI2	BFIN_IRQ(40)	/* SPI2 (DMA23) Interrupt */
 #define IRQ_UART1_RX	BFIN_IRQ(41)	/* UART1 RX (DMA8) Interrupt */
@@ -143,14 +143,14 @@ Events         (highest priority)  EMU         0
 #define IRQ_USB_INT2	BFIN_IRQ(77)	/* USB INT2 Interrupt */
 #define IRQ_USB_DMA	BFIN_IRQ(78)	/* USB DMA Interrupt */
 #define IRQ_OPTSEC	BFIN_IRQ(79)	/* OTPSEC Interrupt */
-#define IRQ_TMR0	BFIN_IRQ(86)	/* Timer 0 Interrupt */
-#define IRQ_TMR1	BFIN_IRQ(87)	/* Timer 1 Interrupt */
-#define IRQ_TMR2	BFIN_IRQ(88)	/* Timer 2 Interrupt */
-#define IRQ_TMR3	BFIN_IRQ(89)	/* Timer 3 Interrupt */
-#define IRQ_TMR4	BFIN_IRQ(90)	/* Timer 4 Interrupt */
-#define IRQ_TMR5	BFIN_IRQ(91)	/* Timer 5 Interrupt */
-#define IRQ_TMR6	BFIN_IRQ(92)	/* Timer 6 Interrupt */
-#define IRQ_TMR7	BFIN_IRQ(93)	/* Timer 7 Interrupt */
+#define IRQ_TIMER0	BFIN_IRQ(86)	/* Timer 0 Interrupt */
+#define IRQ_TIMER1	BFIN_IRQ(87)	/* Timer 1 Interrupt */
+#define IRQ_TIMER2	BFIN_IRQ(88)	/* Timer 2 Interrupt */
+#define IRQ_TIMER3	BFIN_IRQ(89)	/* Timer 3 Interrupt */
+#define IRQ_TIMER4	BFIN_IRQ(90)	/* Timer 4 Interrupt */
+#define IRQ_TIMER5	BFIN_IRQ(91)	/* Timer 5 Interrupt */
+#define IRQ_TIMER6	BFIN_IRQ(92)	/* Timer 6 Interrupt */
+#define IRQ_TIMER7	BFIN_IRQ(93)	/* Timer 7 Interrupt */
 #define IRQ_PINT2	BFIN_IRQ(94)	/* PINT2 Interrupt */
 #define IRQ_PINT3	BFIN_IRQ(95)	/* PINT3 Interrupt */
 
@@ -248,9 +248,9 @@ Events         (highest priority)  EMU         0
 
 
 #ifdef CONFIG_IRQCHIP_DEMUX_GPIO
-#define NR_IRQS     (IRQ_PH15+1)
+#define NR_IRQS     (IRQ_PE15+1)
 #else
-#define NR_IRQS     (IRQ_UART1_ERROR+1)
+#define NR_IRQS     (SYS_IRQS+1)
 #endif
 
 #define IVG7            7
@@ -263,44 +263,116 @@ Events         (highest priority)  EMU         0
 #define IVG14           14
 #define IVG15           15
 
-/* IAR0 BIT FIELDS*/
-#define IRQ_PLL_WAKEUP_POS  0
-#define IRQ_DMA_ERROR_POS   4
-#define IRQ_ERROR_POS       8
-#define IRQ_RTC_POS         12
-#define IRQ_PPI_POS         16
-#define IRQ_SPORT0_RX_POS   20
-#define IRQ_SPORT0_TX_POS   24
-#define IRQ_SPORT1_RX_POS   28
+/* IAR0 BIT FIELDS */
+#define IRQ_PLL_WAKEUP_POS	0
+#define IRQ_DMAC0_ERR_POS	4
+#define IRQ_EPPI0_ERR_POS	8
+#define IRQ_SPORT0_ERR_POS	12
+#define IRQ_SPORT1_ERR_POS	16
+#define IRQ_SPI0_ERR_POS	20
+#define IRQ_UART0_ERR_POS	24
+#define IRQ_RTC_POS		28
 
-/* IAR1 BIT FIELDS*/
-#define IRQ_SPORT1_TX_POS   0
-#define IRQ_TWI_POS         4
-#define IRQ_SPI_POS         8
-#define IRQ_UART0_RX_POS    12
-#define IRQ_UART0_TX_POS    16
-#define IRQ_UART1_RX_POS    20
-#define IRQ_UART1_TX_POS    24
-#define IRQ_CAN_RX_POS      28
+/* IAR1 BIT FIELDS */
+#define IRQ_EPPI0_POS		0
+#define IRQ_SPORT0_RX_POS	4
+#define IRQ_SPORT0_TX_POS	8
+#define IRQ_SPORT1_RX_POS	12
+#define IRQ_SPORT1_TX_POS	16
+#define IRQ_SPI0_POS		20
+#define IRQ_UART0_RX_POS	24
+#define IRQ_UART0_TX_POS	28
 
-/* IAR2 BIT FIELDS*/
-#define IRQ_CAN_TX_POS      0
-#define IRQ_MAC_RX_POS      4
-#define IRQ_MAC_TX_POS      8
-#define IRQ_TMR0_POS        12
-#define IRQ_TMR1_POS        16
-#define IRQ_TMR2_POS        20
-#define IRQ_TMR3_POS        24
-#define IRQ_TMR4_POS        28
+/* IAR2 BIT FIELDS */
+#define IRQ_TIMER8_POS		0
+#define IRQ_TIMER9_POS		4
+#define IRQ_TIMER10_POS		8
+#define IRQ_PINT0_POS		12
+#define IRQ_PINT1_POS		16
+#define IRQ_MDMAS0_POS		20
+#define IRQ_MDMAS1_POS		24
+#define IRQ_WATCHDOG_POS	28
 
-/* IAR3 BIT FIELDS*/
-#define IRQ_TMR5_POS        0
-#define IRQ_TMR6_POS        4
-#define IRQ_TMR7_POS        8
-#define IRQ_PROG_INTA_POS   12
-#define IRQ_PORTG_INTB_POS   16
-#define IRQ_MEM_DMA0_POS    20
-#define IRQ_MEM_DMA1_POS    24
-#define IRQ_WATCH_POS       28
+/* IAR3 BIT FIELDS */
+#define IRQ_DMAC1_ERR_POS	0
+#define IRQ_SPORT2_ERR_POS	4
+#define IRQ_SPORT3_ERR_POS	8
+#define IRQ_MXVR_DATA_POS	12
+#define IRQ_SPI1_ERR_POS	16
+#define IRQ_SPI2_ERR_POS	20
+#define IRQ_UART1_ERR_POS	24
+#define IRQ_UART2_ERR_POS	28
 
-#endif				/* _BF537_IRQ_H_ */
+/* IAR4 BIT FILEDS */
+#define IRQ_CAN0_ERR_POS	0
+#define IRQ_SPORT2_RX_POS	4
+#define IRQ_SPORT2_TX_POS	8
+#define IRQ_SPORT3_RX_POS	12
+#define IRQ_SPORT3_TX_POS	16
+#define IRQ_EPPI1_POS		20
+#define IRQ_EPPI2_POS		24
+#define IRQ_SPI1_POS		28
+
+/* IAR5 BIT FIELDS */
+#define IRQ_SPI2_POS		0
+#define IRQ_UART1_RX_POS	4
+#define IRQ_UART1_TX_POS	8
+#define IRQ_ATAPI_RX_POS	12
+#define IRQ_ATAPI_TX_POS	16
+#define IRQ_TWI0_POS		20
+#define IRQ_TWI1_POS		24
+#define IRQ_CAN0_RX_POS		28
+
+/* IAR6 BIT FIELDS */
+#define IRQ_CAN0_TX_POS		0
+#define IRQ_MDMAS2_POS		4
+#define IRQ_MDMAS3_POS		8
+#define IRQ_MXVR_ERR_POS	12
+#define IRQ_MXVR_MSG_POS	16
+#define IRQ_MXVR_PKT_POS	20
+#define IRQ_EPPI1_ERR_POS	24
+#define IRQ_EPPI2_ERR_POS	28
+
+/* IAR7 BIT FIELDS */
+#define IRQ_UART3_ERR_POS	0
+#define IRQ_HOST_ERR_POS	4
+#define IRQ_PIXC_ERR_POS	12
+#define IRQ_NFC_ERR_POS		16
+#define IRQ_ATAPI_ERR_POS	20
+#define IRQ_CAN1_ERR_POS	24
+#define IRQ_HS_DMA_ERR_POS	28
+
+/* IAR8 BIT FIELDS */
+#define IRQ_PIXC_IN0_POS	0
+#define IRQ_PIXC_IN1_POS	4
+#define IRQ_PIXC_OUT_POS	8
+#define IRQ_SDH_POS		12
+#define IRQ_CNT_POS		16
+#define IRQ_KEY_POS		20
+#define IRQ_CAN1_RX_POS		24
+#define IRQ_CAN1_TX_POS		28
+
+/* IAR9 BIT FIELDS */
+#define IRQ_SDH_MASK0_POS	0
+#define IRQ_SDH_MASK1_POS	4
+#define IRQ_USB_INT0_POS	12
+#define IRQ_USB_INT1_POS	16
+#define IRQ_USB_INT2_POS	20
+#define IRQ_USB_DMA_POS		24
+#define IRQ_OTPSEC_POS		28
+
+/* IAR10 BIT FIELDS */
+#define IRQ_TIMER0_POS		24
+#define IRQ_TIMER1_POS		28
+
+/* IAR11 BIT FIELDS */
+#define IRQ_TIMER2_POS		0
+#define IRQ_TIMER3_POS		4
+#define IRQ_TIMER4_POS		8
+#define IRQ_TIMER5_POS		12
+#define IRQ_TIMER6_POS		16
+#define IRQ_TIMER7_POS		20
+#define IRQ_PINT2_POS		24
+#define IRQ_PINT3_POS		28
+
+#endif /* _BF548_IRQ_H_ */
diff --git a/include/asm-blackfin/mach-bf561/dma.h b/include/asm-blackfin/mach-bf561/dma.h
index 21d982003e7..766334b7d8a 100644
--- a/include/asm-blackfin/mach-bf561/dma.h
+++ b/include/asm-blackfin/mach-bf561/dma.h
@@ -32,4 +32,7 @@
 #define CH_IMEM_STREAM1_SRC	34
 #define CH_IMEM_STREAM1_DEST	35
 
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *base_addr[];
+
 #endif