Move all of include/asm-m68knommu to arch/m68knommu/include/asm.

With the current kbuild infrastructure in place no other changes
are required for this to work.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 0 insertions, 325 deletions

diff --git a/include/asm-m68knommu/mcfne.h b/include/asm-m68knommu/mcfne.h
deleted file mode 100644
index 431f63aadd0..00000000000
--- a/include/asm-m68knommu/mcfne.h
+++ /dev/null
@@ -1,325 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfne.h -- NE2000 in ColdFire eval boards.
- *
- *	(C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
- *	(C) Copyright 2000,      Lineo (www.lineo.com)
- *	(C) Copyright 2001,      SnapGear (www.snapgear.com)
- *
- *      19990409 David W. Miller  Converted from m5206ne.h for 5307 eval board
- *
- *      Hacked support for m5206e Cadre III evaluation board
- *      Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
- */
-
-/****************************************************************************/
-#ifndef	mcfne_h
-#define	mcfne_h
-/****************************************************************************/
-
-
-/*
- *	Support for NE2000 clones devices in ColdFire based boards.
- *	Not all boards address these parts the same way, some use a
- *	direct addressing method, others use a side-band address space
- *	to access odd address registers, some require byte swapping
- *	others do not.
- */
-#define	BSWAP(w)	(((w) << 8) | ((w) >> 8))
-#define	RSWAP(w)	(w)
-
-
-/*
- *	Define the basic hardware resources of NE2000 boards.
- */
-
-#if defined(CONFIG_ARN5206)
-#define NE2000_ADDR		0x40000300
-#define NE2000_ODDOFFSET	0x00010000
-#define	NE2000_IRQ_VECTOR	0xf0
-#define	NE2000_IRQ_PRIORITY	2
-#define	NE2000_IRQ_LEVEL	4
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5206eC3)
-#define	NE2000_ADDR		0x40000300
-#define	NE2000_ODDOFFSET	0x00010000
-#define	NE2000_IRQ_VECTOR	0x1c
-#define	NE2000_IRQ_PRIORITY	2
-#define	NE2000_IRQ_LEVEL	4
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
-#define NE2000_ADDR		0x30000300
-#define NE2000_IRQ_VECTOR	25
-#define NE2000_IRQ_PRIORITY	1
-#define NE2000_IRQ_LEVEL	3
-#define	NE2000_BYTE		volatile unsigned char
-#endif
-
-#if defined(CONFIG_M5307C3)
-#define NE2000_ADDR		0x40000300
-#define NE2000_ODDOFFSET	0x00010000
-#define NE2000_IRQ_VECTOR	0x1b
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-#define NE2000_ADDR		0x30600300
-#define NE2000_ODDOFFSET	0x00008000
-#define NE2000_IRQ_VECTOR	67
-#undef	BSWAP
-#define	BSWAP(w)		(w)
-#define	NE2000_BYTE		volatile unsigned short
-#undef	RSWAP
-#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
-#define NE2000_ADDR0		0x30600300
-#define NE2000_ADDR1		0x30800300
-#define NE2000_ODDOFFSET	0x00008000
-#define NE2000_IRQ_VECTOR0	27
-#define NE2000_IRQ_VECTOR1	29
-#undef	BSWAP
-#define	BSWAP(w)		(w)
-#define	NE2000_BYTE		volatile unsigned short
-#undef	RSWAP
-#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
-#define NE2000_ADDR		0x30600300
-#define NE2000_ODDOFFSET	0x00008000
-#define NE2000_IRQ_VECTOR	27
-#undef	BSWAP
-#define	BSWAP(w)		(w)
-#define	NE2000_BYTE		volatile unsigned short
-#undef	RSWAP
-#define	RSWAP(w)		(((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_ARN5307)
-#define NE2000_ADDR		0xfe600300
-#define NE2000_ODDOFFSET	0x00010000
-#define NE2000_IRQ_VECTOR	0x1b
-#define NE2000_IRQ_PRIORITY	2
-#define NE2000_IRQ_LEVEL	3
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5407C3)
-#define NE2000_ADDR		0x40000300
-#define NE2000_ODDOFFSET	0x00010000
-#define NE2000_IRQ_VECTOR	0x1b
-#define	NE2000_BYTE		volatile unsigned short
-#endif
-
-/****************************************************************************/
-
-/*
- *	Side-band address space for odd address requires re-mapping
- *	many of the standard ISA access functions.
- */
-#ifdef NE2000_ODDOFFSET
-
-#undef outb
-#undef outb_p
-#undef inb
-#undef inb_p
-#undef outsb
-#undef outsw
-#undef insb
-#undef insw
-
-#define	outb	ne2000_outb
-#define	inb	ne2000_inb
-#define	outb_p	ne2000_outb
-#define	inb_p	ne2000_inb
-#define	outsb	ne2000_outsb
-#define	outsw	ne2000_outsw
-#define	insb	ne2000_insb
-#define	insw	ne2000_insw
-
-
-#ifndef COLDFIRE_NE2000_FUNCS
-
-void ne2000_outb(unsigned int val, unsigned int addr);
-int  ne2000_inb(unsigned int addr);
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
-
-#else
-
-/*
- *	This macro converts a conventional register address into the
- *	real memory pointer of the mapped NE2000 device.
- *	On most NE2000 implementations on ColdFire boards the chip is
- *	mapped in kinda funny, due to its ISA heritage.
- */
-#define	NE2000_PTR(addr)	((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
-#define	NE2000_DATA_PTR(addr)	(addr)
-
-
-void ne2000_outb(unsigned int val, unsigned int addr)
-{
-	NE2000_BYTE	*rp;
-
-	rp = (NE2000_BYTE *) NE2000_PTR(addr);
-	*rp = RSWAP(val);
-}
-
-int ne2000_inb(unsigned int addr)
-{
-	NE2000_BYTE	*rp, val;
-
-	rp = (NE2000_BYTE *) NE2000_PTR(addr);
-	val = *rp;
-	return((int) ((NE2000_BYTE) RSWAP(val)));
-}
-
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
-	NE2000_BYTE	*rp, val;
-	unsigned char	*buf;
-
-	buf = (unsigned char *) vbuf;
-	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		val = *rp;
-		*buf++ = RSWAP(val);
-	}
-}
-
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		w, *buf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		w = *rp;
-		*buf++ = BSWAP(w);
-	}
-}
-
-void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
-{
-	NE2000_BYTE	*rp, val;
-	unsigned char	*buf;
-
-	buf = (unsigned char *) vbuf;
-	rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		val = *buf++;
-		*rp = RSWAP(val);
-	}
-}
-
-void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		w, *buf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
-	for (; (len > 0); len--) {
-		w = *buf++;
-		*rp = BSWAP(w);
-	}
-}
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-#endif /* NE2000_OFFOFFSET */
-
-/****************************************************************************/
-
-#ifdef COLDFIRE_NE2000_FUNCS
-
-/*
- *	Lastly the interrupt set up code...
- *	Minor differences between the different board types.
- */
-
-#if defined(CONFIG_ARN5206)
-void ne2000_irqsetup(int irq)
-{
-	volatile unsigned char  *icrp;
-
-	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
-	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206eC3)
-void ne2000_irqsetup(int irq)
-{
-	volatile unsigned char  *icrp;
-
-	icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
-	*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
-}
-#endif
-
-#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
-	mcf_autovector(irq);
-}
-#endif
-
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-void ne2000_irqsetup(int irq)
-{
-	volatile unsigned long	*icrp;
-	volatile unsigned long	*pitr;
-
-	/* The NE2000 device uses external IRQ3 */
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	*icrp = (*icrp & 0x77077777) | 0x00d00000;
-
-	pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
-	*pitr = *pitr | 0x20000000;
-}
-
-void ne2000_irqack(int irq)
-{
-	volatile unsigned long	*icrp;
-
-	/* The NE2000 device uses external IRQ3 */
-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
-	*icrp = (*icrp & 0x77777777) | 0x00800000;
-}
-#endif
-
-#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-
-void ne2000_irqsetup(int irq)
-{
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
-	mcf_autovector(irq);
-}
-
-#else
-
-void ne2000_irqsetup(int irq)
-{
-	mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
-}
-
-#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
-#endif /* CONFIG_M5307 || CONFIG_M5407 */
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-
-/****************************************************************************/
-#endif	/* mcfne_h */