Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 90 insertions, 0 deletions

diff --git a/include/asm-mips/cobalt/cobalt.h b/include/asm-mips/cobalt/cobalt.h
new file mode 100644
index 00000000000..ca1fbc0579f
--- /dev/null
+++ b/include/asm-mips/cobalt/cobalt.h
@@ -0,0 +1,90 @@
+/*
+ * Lowlevel hardware stuff for the MIPS based Cobalt microservers.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1997 Cobalt Microserver
+ * Copyright (C) 1997, 2003 Ralf Baechle
+ * Copyright (C) 2001, 2002, 2003 Liam Davies (ldavies@agile.tv)
+ */
+#ifndef __ASM_COBALT_H
+#define __ASM_COBALT_H
+
+/*
+ * i8259 legacy interrupts used on Cobalt:
+ *
+ *     8  - RTC
+ *     9  - PCI
+ *    14  - IDE0
+ *    15  - IDE1
+ *
+ * CPU IRQs  are 16 ... 23
+ */
+#define COBALT_TIMER_IRQ	18
+#define COBALT_SCC_IRQ          19		/* pre-production has 85C30 */
+#define COBALT_RAQ_SCSI_IRQ	19
+#define COBALT_ETH0_IRQ		19
+#define COBALT_ETH1_IRQ		20
+#define COBALT_SERIAL_IRQ	21
+#define COBALT_SCSI_IRQ         21
+#define COBALT_VIA_IRQ		22		/* Chained to VIA ISA bridge */
+#define COBALT_QUBE_SLOT_IRQ	23
+
+/*
+ * PCI configuration space manifest constants.  These are wired into
+ * the board layout according to the PCI spec to enable the software
+ * to probe the hardware configuration space in a well defined manner.
+ *
+ * The PCI_DEVSHFT() macro transforms these values into numbers
+ * suitable for passing as the dev parameter to the various
+ * pcibios_read/write_config routines.
+ */
+#define COBALT_PCICONF_CPU      0x06
+#define COBALT_PCICONF_ETH0     0x07
+#define COBALT_PCICONF_RAQSCSI  0x08
+#define COBALT_PCICONF_VIA      0x09
+#define COBALT_PCICONF_PCISLOT  0x0A
+#define COBALT_PCICONF_ETH1     0x0C
+
+
+/*
+ * The Cobalt board id information.  The boards have an ID number wired
+ * into the VIA that is available in the high nibble of register 94.
+ * This register is available in the VIA configuration space through the
+ * interface routines qube_pcibios_read/write_config. See cobalt/pci.c
+ */
+#define VIA_COBALT_BRD_ID_REG  0x94
+#define VIA_COBALT_BRD_REG_to_ID(reg)  ((unsigned char) (reg) >> 4)
+#define COBALT_BRD_ID_QUBE1    0x3
+#define COBALT_BRD_ID_RAQ1     0x4
+#define COBALT_BRD_ID_QUBE2    0x5
+#define COBALT_BRD_ID_RAQ2     0x6
+
+/*
+ * Galileo chipset access macros for the Cobalt. The base address for
+ * the GT64111 chip is 0x14000000
+ *
+ * Most of this really should go into a separate GT64111 header file.
+ */
+#define GT64111_IO_BASE		0x10000000UL
+#define GT64111_BASE		0x14000000UL
+#define GALILEO_REG(ofs)	(KSEG0 + GT64111_BASE + (unsigned long)(ofs))
+
+#define GALILEO_INL(port)	(*(volatile unsigned int *) GALILEO_REG(port))
+#define GALILEO_OUTL(val, port)						\
+do {									\
+	*(volatile unsigned int *) GALILEO_REG(port) = (port);		\
+} while (0)
+
+#define GALILEO_T0EXP		0x0100
+#define GALILEO_ENTC0		0x01
+#define GALILEO_SELTC0		0x02
+
+#define PCI_CFG_SET(devfn,where)					\
+	GALILEO_OUTL((0x80000000 | (PCI_SLOT (devfn) << 11) |		\
+		(PCI_FUNC (devfn) << 8) | (where)), GT_PCI0_CFGADDR_OFS)
+
+
+#endif /* __ASM_COBALT_H */