[MIPS] Remove support for NEC DDB5476.

As warned several times before.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

2 files changed, 1 insertions, 160 deletions

diff --git a/include/asm-mips/ddb5xxx/ddb5476.h b/include/asm-mips/ddb5xxx/ddb5476.h
deleted file mode 100644
index 4c23390d935..00000000000
--- a/include/asm-mips/ddb5xxx/ddb5476.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * header file specific for ddb5476
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/*
- *  Memory map (physical address)
- *
- *  Note most of the following address must be properly aligned by the
- *  corresponding size.  For example, if PCI_IO_SIZE is 16MB, then
- *  PCI_IO_BASE must be aligned along 16MB boundary.
- */
-#define DDB_SDRAM_BASE		0x00000000
-#define DDB_SDRAM_SIZE		0x04000000      /* 64MB */
-
-#define	DDB_DCS3_BASE		0x04000000	/* flash 1 */
-#define	DDB_DCS3_SIZE		0x01000000	/* 16MB */
-
-#define	DDB_DCS2_BASE		0x05000000	/* flash 2 */
-#define	DDB_DCS2_SIZE		0x01000000	/* 16MB */
-
-#define DDB_PCI_IO_BASE		0x06000000
-#define DDB_PCI_IO_SIZE		0x02000000      /* 32 MB */
-
-#define	DDB_PCI_MEM_BASE	0x08000000
-#define	DDB_PCI_MEM_SIZE	0x08000000	/* 128 MB */
-
-#define	DDB_DCS5_BASE		0x13000000	/* DDB status regs */
-#define	DDB_DCS5_SIZE		0x00200000	/* 2MB, 8-bit */
-
-#define	DDB_DCS4_BASE		0x14000000	/* DDB control regs */
-#define	DDB_DCS4_SIZE		0x00200000	/* 2MB, 8-bit */
-
-#define DDB_INTCS_BASE		0x1fa00000      /* VRC5476 control regs */
-#define DDB_INTCS_SIZE		0x00200000      /* 2MB */
-
-#define DDB_BOOTCS_BASE         0x1fc00000      /* Boot ROM / EPROM /Flash */
-#define DDB_BOOTCS_SIZE         0x00200000      /* 2 MB - doc says 4MB */
-
-
-/* aliases */
-#define	DDB_PCI_CONFIG_BASE	DDB_PCI_MEM_BASE
-#define	DDB_PCI_CONFIG_SIZE	DDB_PCI_MEM_SIZE
-
-/* PCI intr ack share PCIW0 with PCI IO */
-#define	DDB_PCI_IACK_BASE	DDB_PCI_IO_BASE
-
-/*
- * Interrupt mapping
- *
- * We have three interrupt controllers:
- *
- *   . CPU itself - 8 sources
- *   . i8259 - 16 sources
- *   . vrc5476 - 16 sources
- *
- *  They connected as follows:
- *    all vrc5476 interrupts are routed to cpu IP2 (by software setting)
- *    all i2869 are routed to INTC in vrc5476 (by hardware connection)
- *
- *  All VRC5476 PCI interrupts are level-triggered (no ack needed).
- *  All PCI irq but INTC are active low.
- */
-
-/*
- * irq number block assignment
- */
-
-#define	NUM_CPU_IRQ		8
-#define	NUM_I8259_IRQ		16
-#define	NUM_VRC5476_IRQ		16
-
-#define	DDB_IRQ_BASE		0
-
-#define	I8259_IRQ_BASE		DDB_IRQ_BASE
-#define	VRC5476_IRQ_BASE	(I8259_IRQ_BASE + NUM_I8259_IRQ)
-#define	CPU_IRQ_BASE		(VRC5476_IRQ_BASE + NUM_VRC5476_IRQ)
-
-/*
- * vrc5476 irq defs, see page 52-64 of Vrc5074 system controller manual
- */
-
-#define VRC5476_IRQ_CPCE	0	/* cpu parity error */
-#define VRC5476_IRQ_CNTD	1	/* cpu no target */
-#define VRC5476_IRQ_MCE		2	/* memory check error */
-#define VRC5476_IRQ_DMA		3	/* DMA */
-#define VRC5476_IRQ_UART	4	/* vrc5476 builtin UART, not used */
-#define VRC5476_IRQ_WDOG	5	/* watchdog timer */
-#define VRC5476_IRQ_GPT		6	/* general purpose timer */
-#define VRC5476_IRQ_LBRT	7	/* local bus read timeout */
-#define VRC5476_IRQ_INTA	8	/* PCI INT #A */
-#define VRC5476_IRQ_INTB	9	/* PCI INT #B */
-#define VRC5476_IRQ_INTC	10	/* PCI INT #C */
-#define VRC5476_IRQ_INTD	11	/* PCI INT #D */
-#define VRC5476_IRQ_INTE	12	/* PCI INT #E */
-#define VRC5476_IRQ_RESERVED_13	13	/* reserved  */
-#define VRC5476_IRQ_PCIS	14	/* PCI SERR #  */
-#define VRC5476_IRQ_PCI		15	/* PCI internal error */
-
-/*
- * i2859 irq assignment
- */
-#define I8259_IRQ_RESERVED_0	0
-#define I8259_IRQ_KEYBOARD	1	/* M1543 default */
-#define I8259_IRQ_CASCADE	2
-#define I8259_IRQ_UART_B	3	/* M1543 default, may conflict with RTC according to schematic diagram  */
-#define I8259_IRQ_UART_A	4	/* M1543 default */
-#define I8259_IRQ_PARALLEL	5	/* M1543 default */
-#define I8259_IRQ_RESERVED_6	6
-#define I8259_IRQ_RESERVED_7	7
-#define I8259_IRQ_RTC		8	/* who set this? */
-#define I8259_IRQ_USB		9	/* ddb_setup */
-#define I8259_IRQ_PMU		10	/* ddb_setup */
-#define I8259_IRQ_RESERVED_11	11
-#define I8259_IRQ_RESERVED_12	12	/* m1543_irq_setup */
-#define I8259_IRQ_RESERVED_13	13
-#define I8259_IRQ_HDC1		14	/* default and ddb_setup */
-#define I8259_IRQ_HDC2		15	/* default */
-
-
-/*
- * misc
- */
-#define	VRC5476_I8259_CASCADE	VRC5476_IRQ_INTC
-#define	CPU_VRC5476_CASCADE	2
-
-#define is_i8259_irq(irq)       ((irq) < NUM_I8259_IRQ)
-#define nile4_to_irq(n)         ((n)+NUM_I8259_IRQ)
-#define irq_to_nile4(n)         ((n)-NUM_I8259_IRQ)
-
-/*
- * low-level irq functions
- */
-#ifndef __ASSEMBLY__
-extern void nile4_map_irq(int nile4_irq, int cpu_irq);
-extern void nile4_map_irq_all(int cpu_irq);
-extern void nile4_enable_irq(int nile4_irq);
-extern void nile4_disable_irq(int nile4_irq);
-extern void nile4_disable_irq_all(void);
-extern u16 nile4_get_irq_stat(int cpu_irq);
-extern void nile4_enable_irq_output(int cpu_irq);
-extern void nile4_disable_irq_output(int cpu_irq);
-extern void nile4_set_pci_irq_polarity(int pci_irq, int high);
-extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level);
-extern void nile4_clear_irq(int nile4_irq);
-extern void nile4_clear_irq_mask(u32 mask);
-extern u8 nile4_i8259_iack(void);
-extern void nile4_dump_irq_status(void);        /* Debug */
-#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-mips/ddb5xxx/ddb5xxx.h b/include/asm-mips/ddb5xxx/ddb5xxx.h
index 2c8c93430c1..2f1b191c6ff 100644
--- a/include/asm-mips/ddb5xxx/ddb5xxx.h
+++ b/include/asm-mips/ddb5xxx/ddb5xxx.h
@@ -255,9 +255,7 @@ extern void ddb_pci_reset_bus(void);
 /*
  * include the board dependent part
  */
-#if defined(CONFIG_DDB5476)
-#include <asm/ddb5xxx/ddb5476.h>
-#elif defined(CONFIG_DDB5477)
+#if defined(CONFIG_DDB5477)
 #include <asm/ddb5xxx/ddb5477.h>
 #else
 #error "Unknown DDB board!"