MIPS: Move headfiles to new location below arch/mips/include

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 91 deletions

diff --git a/include/asm-mips/dec/kn02.h b/include/asm-mips/dec/kn02.h
deleted file mode 100644
index 93430b5f472..00000000000
--- a/include/asm-mips/dec/kn02.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Hardware info about DECstation 5000/200 systems (otherwise known as
- * 3max or KN02).
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
- * are by courtesy of Chris Fraser.
- * Copyright (C) 2002, 2003, 2005  Maciej W. Rozycki
- */
-#ifndef __ASM_MIPS_DEC_KN02_H
-#define __ASM_MIPS_DEC_KN02_H
-
-#define KN02_SLOT_BASE	0x1fc00000
-#define KN02_SLOT_SIZE	0x00080000
-
-/*
- * Address ranges decoded by the "system slot" logic for onboard devices.
- */
-#define KN02_SYS_ROM	(0*KN02_SLOT_SIZE)	/* system board ROM */
-#define KN02_RES_1	(1*KN02_SLOT_SIZE)	/* unused */
-#define KN02_CHKSYN	(2*KN02_SLOT_SIZE)	/* ECC syndrome */
-#define KN02_ERRADDR	(3*KN02_SLOT_SIZE)	/* bus error address */
-#define KN02_DZ11	(4*KN02_SLOT_SIZE)	/* DZ11 (DC7085) serial */
-#define KN02_RTC	(5*KN02_SLOT_SIZE)	/* DS1287 RTC */
-#define KN02_CSR	(6*KN02_SLOT_SIZE)	/* system ctrl & status reg */
-#define KN02_SYS_ROM_7	(7*KN02_SLOT_SIZE)	/* system board ROM (alias) */
-
-
-/*
- * System Control & Status Register bits.
- */
-#define KN02_CSR_RES_28		(0xf<<28)	/* unused */
-#define KN02_CSR_PSU		(1<<27)		/* power supply unit warning */
-#define KN02_CSR_NVRAM		(1<<26)		/* ~NVRAM clear jumper */
-#define KN02_CSR_REFEVEN	(1<<25)		/* mem refresh bank toggle */
-#define KN02_CSR_NRMOD		(1<<24)		/* ~NRMOD manufact. jumper */
-#define KN02_CSR_IOINTEN	(0xff<<16)	/* IRQ mask bits */
-#define KN02_CSR_DIAGCHK	(1<<15)		/* diagn/norml ECC reads */
-#define KN02_CSR_DIAGGEN	(1<<14)		/* diagn/norml ECC writes */
-#define KN02_CSR_CORRECT	(1<<13)		/* ECC correct/check */
-#define KN02_CSR_LEDIAG		(1<<12)		/* ECC diagn. latch strobe */
-#define KN02_CSR_TXDIS		(1<<11)		/* DZ11 transmit disable */
-#define KN02_CSR_BNK32M		(1<<10)		/* 32M/8M stride */
-#define KN02_CSR_DIAGDN		(1<<9)		/* DIAGDN manufact. jumper */
-#define KN02_CSR_BAUD38		(1<<8)		/* DZ11 38/19kbps ext. rate */
-#define KN02_CSR_IOINT		(0xff<<0)	/* IRQ status bits (r/o) */
-#define KN02_CSR_LEDS		(0xff<<0)	/* ~diagnostic LEDs (w/o) */
-
-
-/*
- * CPU interrupt bits.
- */
-#define KN02_CPU_INR_RES_6	6	/* unused */
-#define KN02_CPU_INR_BUS	5	/* memory, I/O bus read/write errors */
-#define KN02_CPU_INR_RES_4	4	/* unused */
-#define KN02_CPU_INR_RTC	3	/* DS1287 RTC */
-#define KN02_CPU_INR_CASCADE	2	/* CSR cascade */
-
-/*
- * CSR interrupt bits.
- */
-#define KN02_CSR_INR_DZ11	7	/* DZ11 (DC7085) serial */
-#define KN02_CSR_INR_LANCE	6	/* LANCE (Am7990) Ethernet */
-#define KN02_CSR_INR_ASC	5	/* ASC (NCR53C94) SCSI */
-#define KN02_CSR_INR_RES_4	4	/* unused */
-#define KN02_CSR_INR_RES_3	3	/* unused */
-#define KN02_CSR_INR_TC2	2	/* TURBOchannel slot #2 */
-#define KN02_CSR_INR_TC1	1	/* TURBOchannel slot #1 */
-#define KN02_CSR_INR_TC0	0	/* TURBOchannel slot #0 */
-
-
-#define KN02_IRQ_BASE		8	/* first IRQ assigned to CSR */
-#define KN02_IRQ_LINES		8	/* number of CSR interrupts */
-
-#define KN02_IRQ_NR(n)		((n) + KN02_IRQ_BASE)
-#define KN02_IRQ_MASK(n)	(1 << (n))
-#define KN02_IRQ_ALL		0xff
-
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-extern u32 cached_kn02_csr;
-extern void init_kn02_irqs(int base);
-#endif
-
-#endif /* __ASM_MIPS_DEC_KN02_H */