diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/asm-mips/hazards.h |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'include/asm-mips/hazards.h')
-rw-r--r-- | include/asm-mips/hazards.h | 217 |
1 files changed, 217 insertions, 0 deletions
diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h new file mode 100644 index 00000000000..f524eaccd5f --- /dev/null +++ b/include/asm-mips/hazards.h @@ -0,0 +1,217 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Ralf Baechle + */ +#ifndef _ASM_HAZARDS_H +#define _ASM_HAZARDS_H + +#include <linux/config.h> + +#ifdef __ASSEMBLY__ + + .macro _ssnop + sll $0, $0, 1 + .endm + + .macro _ehb + sll $0, $0, 3 + .endm + +/* + * RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent + * use of the JTLB for instructions should not occur for 4 cpu cycles and use + * for data translations should not occur for 3 cpu cycles. + */ +#ifdef CONFIG_CPU_RM9000 + + .macro mtc0_tlbw_hazard + .set push + .set mips32 + _ssnop; _ssnop; _ssnop; _ssnop + .set pop + .endm + + .macro tlbw_eret_hazard + .set push + .set mips32 + _ssnop; _ssnop; _ssnop; _ssnop + .set pop + .endm + +#else + +/* + * The taken branch will result in a two cycle penalty for the two killed + * instructions on R4000 / R4400. Other processors only have a single cycle + * hazard so this is nice trick to have an optimal code for a range of + * processors. + */ + .macro mtc0_tlbw_hazard + b . + 8 + .endm + + .macro tlbw_eret_hazard + .endm +#endif + +/* + * mtc0->mfc0 hazard + * The 24K has a 2 cycle mtc0/mfc0 execution hazard. + * It is a MIPS32R2 processor so ehb will clear the hazard. + */ + +#ifdef CONFIG_CPU_MIPSR2 +/* + * Use a macro for ehb unless explicit support for MIPSR2 is enabled + */ + +#define irq_enable_hazard + _ehb + +#define irq_disable_hazard + _ehb + +#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) + +/* + * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. + */ + +#define irq_enable_hazard + +#define irq_disable_hazard + +#else + +/* + * Classic MIPS needs 1 - 3 nops or ssnops + */ +#define irq_enable_hazard +#define irq_disable_hazard \ + _ssnop; _ssnop; _ssnop + +#endif + +#else /* __ASSEMBLY__ */ + +__asm__( + " .macro _ssnop \n\t" + " sll $0, $2, 1 \n\t" + " .endm \n\t" + " \n\t" + " .macro _ehb \n\t" + " sll $0, $0, 3 \n\t" + " .endm \n\t"); + +#ifdef CONFIG_CPU_RM9000 +/* + * RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent + * use of the JTLB for instructions should not occur for 4 cpu cycles and use + * for data translations should not occur for 3 cpu cycles. + */ + +#define mtc0_tlbw_hazard() \ + __asm__ __volatile__( \ + ".set\tmips32\n\t" \ + "_ssnop; _ssnop; _ssnop; _ssnop\n\t" \ + ".set\tmips0") + +#define tlbw_use_hazard() \ + __asm__ __volatile__( \ + ".set\tmips32\n\t" \ + "_ssnop; _ssnop; _ssnop; _ssnop\n\t" \ + ".set\tmips0") +#else + +/* + * Overkill warning ... + */ +#define mtc0_tlbw_hazard() \ + __asm__ __volatile__( \ + ".set noreorder\n\t" \ + "nop; nop; nop; nop; nop; nop;\n\t" \ + ".set reorder\n\t") + +#define tlbw_use_hazard() \ + __asm__ __volatile__( \ + ".set noreorder\n\t" \ + "nop; nop; nop; nop; nop; nop;\n\t" \ + ".set reorder\n\t") + +#endif + +/* + * mtc0->mfc0 hazard + * The 24K has a 2 cycle mtc0/mfc0 execution hazard. + * It is a MIPS32R2 processor so ehb will clear the hazard. + */ + +#ifdef CONFIG_CPU_MIPSR2 +/* + * Use a macro for ehb unless explicit support for MIPSR2 is enabled + */ +__asm__( + " .macro\tirq_enable_hazard \n\t" + " _ehb \n\t" + " .endm \n\t" + " \n\t" + " .macro\tirq_disable_hazard \n\t" + " _ehb \n\t" + " .endm"); + +#define irq_enable_hazard() \ + __asm__ __volatile__( \ + "_ehb\t\t\t\t# irq_enable_hazard") + +#define irq_disable_hazard() \ + __asm__ __volatile__( \ + "_ehb\t\t\t\t# irq_disable_hazard") + +#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) + +/* + * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. + */ + +__asm__( + " .macro\tirq_enable_hazard \n\t" + " .endm \n\t" + " \n\t" + " .macro\tirq_disable_hazard \n\t" + " .endm"); + +#define irq_enable_hazard() do { } while (0) +#define irq_disable_hazard() do { } while (0) + +#else + +/* + * Default for classic MIPS processors. Assume worst case hazards but don't + * care about the irq_enable_hazard - sooner or later the hardware will + * enable it and we don't care when exactly. + */ + +__asm__( + " # \n\t" + " # There is a hazard but we do not care \n\t" + " # \n\t" + " .macro\tirq_enable_hazard \n\t" + " .endm \n\t" + " \n\t" + " .macro\tirq_disable_hazard \n\t" + " _ssnop; _ssnop; _ssnop \n\t" + " .endm"); + +#define irq_enable_hazard() do { } while (0) +#define irq_disable_hazard() \ + __asm__ __volatile__( \ + "_ssnop; _ssnop; _ssnop;\t\t# irq_disable_hazard") + +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_HAZARDS_H */ |