[MIPS] IP27: Nuke leftovers of _STANDALONE

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 3 insertions, 73 deletions

diff --git a/include/asm-mips/sn/sn0/addrs.h b/include/asm-mips/sn/sn0/addrs.h
index 7cb9c31f687..0ee8cbcb5b0 100644
--- a/include/asm-mips/sn/sn0/addrs.h
+++ b/include/asm-mips/sn/sn0/addrs.h
@@ -85,15 +85,15 @@
 #define NASID_GET(_pa)		(int) ((UINT64_CAST (_pa) >>		\
 					NASID_SHFT) & NASID_BITMASK)
 
-#if !defined(__ASSEMBLY__) && !defined(_STANDALONE)
+#if !defined(__ASSEMBLY__)
 
 #define NODE_SWIN_BASE(nasid, widget)					\
 	((widget == 0) ? NODE_BWIN_BASE((nasid), SWIN0_BIGWIN)		\
 	: RAW_NODE_SWIN_BASE(nasid, widget))
-#else /* __ASSEMBLY__ || _STANDALONE */
+#else /* __ASSEMBLY__ */
 #define NODE_SWIN_BASE(nasid, widget) \
      (NODE_IO_BASE(nasid) + (UINT64_CAST (widget) << SWIN_SIZE_BITS))
-#endif /* __ASSEMBLY__ || _STANDALONE */
+#endif /* __ASSEMBLY__ */
 
 /*
  * The following definitions pertain to the IO special address
@@ -276,76 +276,6 @@
 
 #define _ARCSPROM
 
-#ifdef _STANDALONE
-
-/*
- * The PROM needs to pass the device base address and the
- * device pci cfg space address to the device drivers during
- * install. The COMPONENT->Key field is used for this purpose.
- * Macros needed by SN0 device drivers to convert the
- * COMPONENT->Key field to the respective base address.
- * Key field looks as follows:
- *
- *  +----------------------------------------------------+
- *  |devnasid | widget  |pciid |hubwidid|hstnasid | adap |
- *  |   2     |   1     |  1   |   1    |    2    |   1  |
- *  +----------------------------------------------------+
- *  |         |         |      |        |         |      |
- *  64        48        40     32       24        8      0
- *
- * These are used by standalone drivers till the io infrastructure
- * is in place.
- */
-
-#ifndef __ASSEMBLY__
-
-#define uchar unsigned char
-
-#define KEY_DEVNASID_SHFT  48
-#define KEY_WIDID_SHFT	   40
-#define KEY_PCIID_SHFT	   32
-#define KEY_HUBWID_SHFT	   24
-#define KEY_HSTNASID_SHFT  8
-
-#define MK_SN0_KEY(nasid, widid, pciid) \
-			((((__psunsigned_t)nasid)<< KEY_DEVNASID_SHFT |\
-				((__psunsigned_t)widid) << KEY_WIDID_SHFT) |\
-				((__psunsigned_t)pciid) << KEY_PCIID_SHFT)
-
-#define ADD_HUBWID_KEY(key,hubwid)\
-			(key|=((__psunsigned_t)hubwid << KEY_HUBWID_SHFT))
-
-#define ADD_HSTNASID_KEY(key,hstnasid)\
-			(key|=((__psunsigned_t)hstnasid << KEY_HSTNASID_SHFT))
-
-#define GET_DEVNASID_FROM_KEY(key)	((short)(key >> KEY_DEVNASID_SHFT))
-#define GET_WIDID_FROM_KEY(key)		((uchar)(key >> KEY_WIDID_SHFT))
-#define GET_PCIID_FROM_KEY(key)		((uchar)(key >> KEY_PCIID_SHFT))
-#define GET_HUBWID_FROM_KEY(key)	((uchar)(key >> KEY_HUBWID_SHFT))
-#define GET_HSTNASID_FROM_KEY(key)	((short)(key >> KEY_HSTNASID_SHFT))
-
-#define PCI_64_TARGID_SHFT		60
-
-#define GET_PCIBASE_FROM_KEY(key)  (NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\
-					GET_WIDID_FROM_KEY(key))\
-					| BRIDGE_DEVIO(GET_PCIID_FROM_KEY(key)))
-
-#define GET_PCICFGBASE_FROM_KEY(key) \
-			(NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\
-			      GET_WIDID_FROM_KEY(key))\
-			| BRIDGE_TYPE0_CFG_DEV(GET_PCIID_FROM_KEY(key)))
-
-#define GET_WIDBASE_FROM_KEY(key) \
-                        (NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\
-                              GET_WIDID_FROM_KEY(key)))
-
-#define PUT_INSTALL_STATUS(c,s)		c->Revision = s
-#define GET_INSTALL_STATUS(c)		c->Revision
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _STANDALONE */
-
 #if defined (HUB_ERR_STS_WAR)
 
 #define ERR_STS_WAR_REGISTER	IIO_IIBUSERR