Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (51 commits)
  [MIPS] Make timer interrupt frequency configurable from kconfig.
  [MIPS] Correct HAL2 Kconfig description
  [MIPS] Fix R4K cache macro names
  [MIPS] Add Missing R4K Cache Macros to IP27 & IP32
  [MIPS] Support for the RM9000-based Basler eXcite smart camera platform.
  [MIPS] Support for the R5500-based NEC EMMA2RH Mark-eins board
  [MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors.
  [MIPS] SN: include asm/sn/types.h for nasid_t.
  [MIPS] Random fixes for sb1250
  [MIPS] Fix bcm1480 compile
  [MIPS] Remove support for NEC DDB5476.
  [MIPS] Remove support for NEC DDB5074.
  [MIPS] Cleanup memory managment initialization.
  [MIPS] SN: Declare bridge_pci_ops.
  [MIPS] Remove unused function alloc_pci_controller.
  [MIPS] IP27: Extract pci_ops into separate file.
  [MIPS] IP27: Use symbolic constants instead of magic numbers.
  [MIPS] vr41xx: remove unnecessay items from vr41xx/Kconfig.
  [MIPS] IP27: Cleanup N/M mode configuration.
  [MIPS] IP27: Throw away old unused hacks.
  ...

11 files changed, 20 insertions, 291 deletions

diff --git a/include/asm-mips/sn/addrs.h b/include/asm-mips/sn/addrs.h
index 2b5cef1ba37..6c8a5577ddf 100644
--- a/include/asm-mips/sn/addrs.h
+++ b/include/asm-mips/sn/addrs.h
@@ -27,13 +27,8 @@
 
 #ifndef __ASSEMBLY__
 
-#if defined(CONFIG_SGI_IO)	/* FIXME */
-#define PS_UINT_CAST		(__psunsigned_t)
-#define UINT64_CAST		(__uint64_t)
-#else	/* CONFIG_SGI_IO */
 #define PS_UINT_CAST		(unsigned long)
 #define UINT64_CAST		(unsigned long)
-#endif	/* CONFIG_SGI_IO */
 
 #define HUBREG_CAST		(volatile hubreg_t *)
 
@@ -253,14 +248,6 @@
  * for _x.
  */
 
-#ifdef _STANDALONE
-
-/* DO NOT USE THESE DIRECTLY IN THE KERNEL. SEE BELOW. */
-#define LOCAL_HUB(_x)		(HUBREG_CAST (IALIAS_BASE + (_x)))
-#define REMOTE_HUB(_n, _x)	(HUBREG_CAST (NODE_SWIN_BASE(_n, 1) +	\
-					      0x800000 + (_x)))
-#endif /* _STANDALONE */
-
 /*
  * WARNING:
  *	When certain Hub chip workaround are defined, it's not sufficient
@@ -327,20 +314,6 @@
 	PHYS_TO_K0(NODE_OFFSET(nasid) | ARCS_SPB_OFFSET)
 #define ARCS_SPB_SIZE		0x0400
 
-#ifdef _STANDALONE
-
-#define ARCS_TVECTOR_OFFSET	0x2800
-#define ARCS_PVECTOR_OFFSET	0x2c00
-
-/*
- * These addresses are used by the master CPU to install the transfer
- * and private vectors.  All others use the SPB to find them.
- */
-#define TVADDR	(NODE_CAC_BASE(get_nasid()) + ARCS_TVECTOR_OFFSET)
-#define PVADDR	(NODE_CAC_BASE(get_nasid()) + ARCS_PVECTOR_OFFSET)
-
-#endif /* _STANDALONE */
-
 #define KLDIR_OFFSET		0x2000
 #define KLDIR_ADDR(nasid)						\
 	TO_NODE_UNCAC((nasid), KLDIR_OFFSET)
diff --git a/include/asm-mips/sn/sn0/sn0_fru.h b/include/asm-mips/sn/fru.h
index 82c6377c275..b3e3606723b 100644
--- a/include/asm-mips/sn/sn0/sn0_fru.h
+++ b/include/asm-mips/sn/fru.h
@@ -6,10 +6,10 @@
  * Derived from IRIX <sys/SN/SN0/sn0_fru.h>
  *
  * Copyright (C) 1992 - 1997, 1999 Silcon Graphics, Inc.
- * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 1999, 2006 Ralf Baechle (ralf@linux-mips)
  */
-#ifndef _ASM_SN_SN0_SN0_FRU_H
-#define _ASM_SN_SN0_SN0_FRU_H
+#ifndef __ASM_SN_FRU_H
+#define __ASM_SN_FRU_H
 
 #define MAX_DIMMS			8	 /* max # of dimm banks */
 #define MAX_PCIDEV			8	 /* max # of pci devices on a pci bus */
@@ -41,4 +41,4 @@ typedef struct kf_pci_bus_s {
 	                                /* confidence level that the pci dev is bad */
 } kf_pci_bus_t;
 
-#endif /* _ASM_SN_SN0_SN0_FRU_H */
+#endif /* __ASM_SN_FRU_H */
diff --git a/include/asm-mips/sn/klconfig.h b/include/asm-mips/sn/klconfig.h
index 9709ff701d9..dc706268d2c 100644
--- a/include/asm-mips/sn/klconfig.h
+++ b/include/asm-mips/sn/klconfig.h
@@ -37,7 +37,7 @@
 //#include <sys/SN/router.h>
 // XXX Stolen from <sys/SN/router.h>:
 #define MAX_ROUTER_PORTS (6)    /* Max. number of ports on a router */
-#include <asm/sn/sn0/sn0_fru.h>
+#include <asm/sn/fru.h>
 //#include <sys/graph.h>
 //#include <sys/xtalk/xbow.h>
 
@@ -54,32 +54,21 @@
 #include <asm/sn/agent.h>
 #include <asm/arc/types.h>
 #include <asm/arc/hinv.h>
-#if defined(CONFIG_SGI_IO) || defined(CONFIG_SGI_IP35)
+#if defined(CONFIG_SGI_IP35)
 // The hack file has to be before vector and after sn0_fru....
 #include <asm/hack.h>
 #include <asm/sn/vector.h>
 #include <asm/xtalk/xtalk.h>
-#endif /* CONFIG_SGI_IO || CONFIG_SGI_IP35 */
+#endif /* CONFIG_SGI_IP35 */
 #endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */
 
 #define KLCFGINFO_MAGIC	0xbeedbabe
 
-#ifdef FRUTEST
-typedef u64 klconf_off_t;
-#else
 typedef s32 klconf_off_t;
-#endif
 
 /*
  * Some IMPORTANT OFFSETS. These are the offsets on all NODES.
  */
-#if 0
-#define RAMBASE                 0
-#define ARCSSPB_OFF             0x1000 /* shift it to sys/arcs/spb.h */
-
-#define OFF_HWGRAPH 		0
-#endif
-
 #define	MAX_MODULE_ID		255
 #define SIZE_PAD		4096 /* 4k padding for structures */
 /*
@@ -134,15 +123,9 @@ typedef s32 klconf_off_t;
 
 
 typedef struct console_s {
-#if defined(CONFIG_SGI_IO)	/* FIXME */
-	__psunsigned_t 	uart_base;
-	__psunsigned_t 	config_base;
-	__psunsigned_t 	memory_base;
-#else
 	unsigned long 	uart_base;
 	unsigned long 	config_base;
 	unsigned long 	memory_base;
-#endif
 	short		baud;
 	short		flag;
 	int		type;
@@ -174,10 +157,6 @@ typedef struct kl_config_hdr {
 
 
 #define KL_CONFIG_HDR(_nasid) 	((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid)))
-#if 0
-#define KL_CONFIG_MALLOC_HDR(_nasid) \
-                                (KL_CONFIG_HDR(_nasid)->ch_malloc_hdr)
-#endif
 #define KL_CONFIG_INFO_OFFSET(_nasid)					\
         (KL_CONFIG_HDR(_nasid)->ch_board_info)
 #define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off)				\
@@ -197,23 +176,13 @@ typedef struct kl_config_hdr {
 
 /* --- New Macros for the changed kl_config_hdr_t structure --- */
 
-#if defined(CONFIG_SGI_IO)
-#define PTR_CH_MALLOC_HDR(_k)   ((klc_malloc_hdr_t *)\
-			((__psunsigned_t)_k + (_k->ch_malloc_hdr_off)))
-#else
 #define PTR_CH_MALLOC_HDR(_k)   ((klc_malloc_hdr_t *)\
 			(unsigned long)_k + (_k->ch_malloc_hdr_off)))
-#endif
 
 #define KL_CONFIG_CH_MALLOC_HDR(_n)   PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n))
 
-#if defined(CONFIG_SGI_IO)
-#define PTR_CH_CONS_INFO(_k)	((console_t *)\
-			((__psunsigned_t)_k + (_k->ch_cons_off)))
-#else
 #define PTR_CH_CONS_INFO(_k)	((console_t *)\
 			((unsigned long)_k + (_k->ch_cons_off)))
-#endif
 
 #define KL_CONFIG_CH_CONS_INFO(_n)   PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n))
 
@@ -490,14 +459,6 @@ typedef struct lboard_s {
 #define KLCF_NUM_COMPS(_brd)	((_brd)->brd_numcompts)
 #define KLCF_MODULE_ID(_brd)	((_brd)->brd_module)
 
-#ifdef FRUTEST
-
-#define KLCF_NEXT(_brd) 		((_brd)->brd_next ? (lboard_t *)((_brd)->brd_next):  NULL)
-#define KLCF_COMP(_brd, _ndx)   	(klinfo_t *)((_brd)->brd_compts[(_ndx)])
-#define KLCF_COMP_ERROR(_brd, _comp)   	(_brd = _brd , (_comp)->errinfo)
-
-#else
-
 #define KLCF_NEXT(_brd) 	\
         ((_brd)->brd_next ? 	\
 	 (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\
@@ -509,8 +470,6 @@ typedef struct lboard_s {
 #define KLCF_COMP_ERROR(_brd, _comp)	\
                (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo))
 
-#endif
-
 #define KLCF_COMP_TYPE(_comp)	((_comp)->struct_type)
 #define KLCF_BRIDGE_W_ID(_comp)	((_comp)->physid)	/* Widget ID */
 
@@ -631,18 +590,6 @@ typedef struct klport_s {
 	klconf_off_t	port_offset;
 } klport_t;
 
-#if 0
-/*
- * This is very similar to the klport_s but instead of having a componant
- * offset it has a board offset.
- */
-typedef struct klxbow_port_s {
-	nasid_t		port_nasid;
-	unsigned char	port_flag;
-	klconf_off_t	board_offset;
-} klxbow_port_t;
-#endif
-
 typedef struct klcpu_s {                          /* CPU */
 	klinfo_t 	cpu_info;
 	unsigned short 	cpu_prid;	/* Processor PRID value */
@@ -945,36 +892,6 @@ extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int);
 extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class);
 
 
-#if defined(CONFIG_SGI_IO)
-extern xwidgetnum_t nodevertex_widgetnum_get(vertex_hdl_t node_vtx);
-extern vertex_hdl_t nodevertex_xbow_peer_get(vertex_hdl_t node_vtx);
-extern lboard_t *find_gfxpipe(int pipenum);
-extern void setup_gfxpipe_link(vertex_hdl_t vhdl,int pipenum);
-extern lboard_t *find_lboard_module_class(lboard_t *start, moduleid_t mod,
-                                               unsigned char brd_class);
-extern lboard_t *find_nic_lboard(lboard_t *, nic_t);
-extern lboard_t *find_nic_type_lboard(nasid_t, unsigned char, nic_t);
-extern lboard_t *find_lboard_modslot(lboard_t *start, moduleid_t mod, slotid_t slot);
-extern lboard_t *find_lboard_module(lboard_t *start, moduleid_t mod);
-extern lboard_t *get_board_name(nasid_t nasid, moduleid_t mod, slotid_t slot, char *name);
-extern int	config_find_nic_router(nasid_t, nic_t, lboard_t **, klrou_t**);
-extern int	config_find_nic_hub(nasid_t, nic_t, lboard_t **, klhub_t**);
-extern int	config_find_xbow(nasid_t, lboard_t **, klxbow_t**);
-extern klcpu_t *get_cpuinfo(cpuid_t cpu);
-extern int 	update_klcfg_cpuinfo(nasid_t, int);
-extern void 	board_to_path(lboard_t *brd, char *path);
-extern moduleid_t get_module_id(nasid_t nasid);
-extern void 	nic_name_convert(char *old_name, char *new_name);
-extern int 	module_brds(nasid_t nasid, lboard_t **module_brds, int n);
-extern lboard_t *brd_from_key(ulong_t key);
-extern void 	device_component_canonical_name_get(lboard_t *,klinfo_t *,
-						    char *);
-extern int	board_serial_number_get(lboard_t *,char *);
-extern int	is_master_baseio(nasid_t,moduleid_t,slotid_t);
-extern nasid_t	get_actual_nasid(lboard_t *brd) ;
-extern net_vec_t klcfg_discover_route(lboard_t *, lboard_t *, int);
-#else	/* CONFIG_SGI_IO */
 extern klcpu_t *sn_get_cpuinfo(cpuid_t cpu);
-#endif	/* CONFIG_SGI_IO */
 
 #endif /* _ASM_SN_KLCONFIG_H */
diff --git a/include/asm-mips/sn/kldir.h b/include/asm-mips/sn/kldir.h
index f0efab1672e..97ad52e3cbc 100644
--- a/include/asm-mips/sn/kldir.h
+++ b/include/asm-mips/sn/kldir.h
@@ -13,10 +13,6 @@
 
 #include <linux/config.h>
 
-#if defined(CONFIG_SGI_IO)
-#include <asm/hack.h>
-#endif
-
 /*
  * The kldir memory area resides at a fixed place in each node's memory and
  * provides pointers to most other IP27 memory areas.  This allows us to
@@ -136,8 +132,6 @@
 #define KLDIR_OFF_STRIDE		0x28
 #endif /* __ASSEMBLY__ */
 
-#if !defined(CONFIG_SGI_IO)
-
 /*
  * This is defined here because IP27_SYMMON_STK_SIZE must be at least what
  * we define here.  Since it's set up in the prom.  We can't redefine it later
@@ -147,7 +141,7 @@
  */
 #define SYMMON_STACK_SIZE		0x8000
 
-#if defined (PROM) || defined (SABLE)
+#if defined (PROM)
 
 /*
  * These defines are prom version dependent.  No code other than the IP27
@@ -184,7 +178,7 @@
 #define IP27_FREEMEM_COUNT		1
 #define IP27_FREEMEM_STRIDE		0
 
-#endif /* PROM || SABLE*/
+#endif /* PROM */
 /*
  * There will be only one of these in a partition so the IO6 must set it up.
  */
@@ -207,17 +201,11 @@
 #define KLDIR_ENT_SIZE			0x40
 #define KLDIR_MAX_ENTRIES		(0x400 / 0x40)
 
-#endif	/* !CONFIG_SGI_IO */
-
 #ifndef __ASSEMBLY__
 typedef struct kldir_ent_s {
 	u64		magic;		/* Indicates validity of entry      */
 	off_t		offset;		/* Offset from start of node space  */
-#if defined(CONFIG_SGI_IO)	/* FIXME */
-	__psunsigned_t	pointer;	/* Pointer to area in some cases    */
-#else
 	unsigned long	pointer;	/* Pointer to area in some cases    */
-#endif
 	size_t		size;		/* Size in bytes 		    */
 	u64		count;		/* Repeat count if array, 1 if not  */
 	size_t		stride;		/* Stride if array, 0 if not        */
@@ -227,22 +215,4 @@ typedef struct kldir_ent_s {
 } kldir_ent_t;
 #endif /* !__ASSEMBLY__ */
 
-#if defined(CONFIG_SGI_IO)
-
-#define KLDIR_ENT_SIZE			0x40
-#define KLDIR_MAX_ENTRIES		(0x400 / 0x40)
-
-/*
- * The actual offsets of each memory area are machine-dependent
- */
-#ifdef CONFIG_SGI_IP27
-// Not yet #include <asm/sn/sn0/kldir.h>
-#elif defined(CONFIG_SGI_IP35)
-#include <asm/sn/sn1/kldir.h>
-#else
-#error "kldir.h is currently defined for IP27 and IP35 platforms only"
-#endif
-
-#endif	/* CONFIG_SGI_IO */
-
 #endif /* _ASM_SN_KLDIR_H */
diff --git a/include/asm-mips/sn/sn0/addrs.h b/include/asm-mips/sn/sn0/addrs.h
index 398815639fb..2c4b758f673 100644
--- a/include/asm-mips/sn/sn0/addrs.h
+++ b/include/asm-mips/sn/sn0/addrs.h
@@ -49,7 +49,7 @@
  * so for now we just use defines bracketed by an ifdef.
  */
 
-#ifdef CONFIG_SGI_SN0_N_MODE
+#ifdef CONFIG_SGI_SN_N_MODE
 
 #define NODE_SIZE_BITS		31
 #define BWIN_SIZE_BITS		28
@@ -63,7 +63,7 @@
 #define BDDIR_UPPER_MASK	(UINT64_CAST 0x7ffff << 10)
 #define BDECC_UPPER_MASK	(UINT64_CAST 0x3ffffff << 3)
 
-#else /* !defined(CONFIG_SGI_SN0_N_MODE), assume that M-mode is desired */
+#else /* !defined(CONFIG_SGI_SN_N_MODE), assume that M-mode is desired */
 
 #define NODE_SIZE_BITS		32
 #define BWIN_SIZE_BITS		29
@@ -77,7 +77,7 @@
 #define BDDIR_UPPER_MASK	(UINT64_CAST 0xfffff << 10)
 #define BDECC_UPPER_MASK	(UINT64_CAST 0x7ffffff << 3)
 
-#endif /* !defined(CONFIG_SGI_SN0_N_MODE) */
+#endif /* !defined(CONFIG_SGI_SN_N_MODE) */
 
 #define NODE_ADDRSPACE_SIZE	(UINT64_CAST 1 << NODE_SIZE_BITS)
 
@@ -85,15 +85,15 @@
 #define NASID_GET(_pa)		(int) ((UINT64_CAST (_pa) >>		\
 					NASID_SHFT) & NASID_BITMASK)
 
-#if !defined(__ASSEMBLY__) && !defined(_STANDALONE)
+#if !defined(__ASSEMBLY__)
 
 #define NODE_SWIN_BASE(nasid, widget)					\
 	((widget == 0) ? NODE_BWIN_BASE((nasid), SWIN0_BIGWIN)		\
 	: RAW_NODE_SWIN_BASE(nasid, widget))
-#else /* __ASSEMBLY__ || _STANDALONE */
+#else /* __ASSEMBLY__ */
 #define NODE_SWIN_BASE(nasid, widget) \
      (NODE_IO_BASE(nasid) + (UINT64_CAST (widget) << SWIN_SIZE_BITS))
-#endif /* __ASSEMBLY__ || _STANDALONE */
+#endif /* __ASSEMBLY__ */
 
 /*
  * The following definitions pertain to the IO special address
@@ -143,12 +143,7 @@
 #define SN0_WIDGET_BASE(_nasid, _wid)	(NODE_SWIN_BASE((_nasid), (_wid)))
 
 /* Turn on sable logging for the processors whose bits are set. */
-#ifdef SABLE
-#define SABLE_LOG_TRIGGER(_map)	\
-		*((volatile hubreg_t *)(IO_BASE + 0x17ffff0)) = (_map)
-#else
 #define SABLE_LOG_TRIGGER(_map)
-#endif /* SABLE */
 
 #ifndef __ASSEMBLY__
 #define KERN_NMI_ADDR(nasid, slice)					\
@@ -281,76 +276,6 @@
 
 #define _ARCSPROM
 
-#ifdef _STANDALONE
-
-/*
- * The PROM needs to pass the device base address and the
- * device pci cfg space address to the device drivers during
- * install. The COMPONENT->Key field is used for this purpose.
- * Macros needed by SN0 device drivers to convert the
- * COMPONENT->Key field to the respective base address.
- * Key field looks as follows:
- *
- *  +----------------------------------------------------+
- *  |devnasid | widget  |pciid |hubwidid|hstnasid | adap |
- *  |   2     |   1     |  1   |   1    |    2    |   1  |
- *  +----------------------------------------------------+
- *  |         |         |      |        |         |      |
- *  64        48        40     32       24        8      0
- *
- * These are used by standalone drivers till the io infrastructure
- * is in place.
- */
-
-#ifndef __ASSEMBLY__
-
-#define uchar unsigned char
-
-#define KEY_DEVNASID_SHFT  48
-#define KEY_WIDID_SHFT	   40
-#define KEY_PCIID_SHFT	   32
-#define KEY_HUBWID_SHFT	   24
-#define KEY_HSTNASID_SHFT  8
-
-#define MK_SN0_KEY(nasid, widid, pciid) \
-			((((__psunsigned_t)nasid)<< KEY_DEVNASID_SHFT |\
-				((__psunsigned_t)widid) << KEY_WIDID_SHFT) |\
-				((__psunsigned_t)pciid) << KEY_PCIID_SHFT)
-
-#define ADD_HUBWID_KEY(key,hubwid)\
-			(key|=((__psunsigned_t)hubwid << KEY_HUBWID_SHFT))
-
-#define ADD_HSTNASID_KEY(key,hstnasid)\
-			(key|=((__psunsigned_t)hstnasid << KEY_HSTNASID_SHFT))
-
-#define GET_DEVNASID_FROM_KEY(key)	((short)(key >> KEY_DEVNASID_SHFT))
-#define GET_WIDID_FROM_KEY(key)		((uchar)(key >> KEY_WIDID_SHFT))
-#define GET_PCIID_FROM_KEY(key)		((uchar)(key >> KEY_PCIID_SHFT))
-#define GET_HUBWID_FROM_KEY(key)	((uchar)(key >> KEY_HUBWID_SHFT))
-#define GET_HSTNASID_FROM_KEY(key)	((short)(key >> KEY_HSTNASID_SHFT))
-
-#define PCI_64_TARGID_SHFT		60
-
-#define GET_PCIBASE_FROM_KEY(key)  (NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\
-					GET_WIDID_FROM_KEY(key))\
-					| BRIDGE_DEVIO(GET_PCIID_FROM_KEY(key)))
-
-#define GET_PCICFGBASE_FROM_KEY(key) \
-			(NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\
-			      GET_WIDID_FROM_KEY(key))\
-			| BRIDGE_TYPE0_CFG_DEV(GET_PCIID_FROM_KEY(key)))
-
-#define GET_WIDBASE_FROM_KEY(key) \
-                        (NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\
-                              GET_WIDID_FROM_KEY(key)))
-
-#define PUT_INSTALL_STATUS(c,s)		c->Revision = s
-#define GET_INSTALL_STATUS(c)		c->Revision
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _STANDALONE */
-
 #if defined (HUB_ERR_STS_WAR)
 
 #define ERR_STS_WAR_REGISTER	IIO_IIBUSERR
diff --git a/include/asm-mips/sn/sn0/arch.h b/include/asm-mips/sn/sn0/arch.h
index fb78773a5ef..f7c43fa24aa 100644
--- a/include/asm-mips/sn/sn0/arch.h
+++ b/include/asm-mips/sn/sn0/arch.h
@@ -13,8 +13,6 @@
 
 #include <linux/config.h>
 
-#ifndef SABLE
-
 #ifndef SN0XXL  /* 128 cpu SMP max */
 /*
  * This is the maximum number of nodes that can be part of a kernel.
@@ -54,25 +52,16 @@
  */
 #define MAX_PARTITIONS		MAX_REGIONS
 
-
-#else
-
-#define MAX_COMPACT_NODES	4
-#define MAX_NASIDS		4
-#define MAXCPUS			8
-
-#endif
-
 #define NASID_MASK_BYTES	((MAX_NASIDS + 7) / 8)
 
 /*
  * Slot constants for SN0
  */
-#ifdef CONFIG_SGI_SN0_N_MODE
+#ifdef CONFIG_SGI_SN_N_MODE
 #define MAX_MEM_SLOTS   16                      /* max slots per node */
-#else /* !CONFIG_SGI_SN0_N_MODE, assume M_MODE */
+#else /* !CONFIG_SGI_SN_N_MODE, assume CONFIG_SGI_SN_M_MODE */
 #define MAX_MEM_SLOTS   32                      /* max slots per node */
-#endif /* defined(N_MODE) */
+#endif /* CONFIG_SGI_SN_M_MODE */
 
 #define SLOT_SHIFT      	(27)
 #define SLOT_MIN_MEM_SIZE	(32*1024*1024)
diff --git a/include/asm-mips/sn/sn0/hub.h b/include/asm-mips/sn/sn0/hub.h
index f5dbba6f461..3e228f8e796 100644
--- a/include/asm-mips/sn/sn0/hub.h
+++ b/include/asm-mips/sn/sn0/hub.h
@@ -31,10 +31,6 @@
 #include <asm/sn/sn0/hubni.h>
 //#include <asm/sn/sn0/hubcore.h>
 
-#ifdef SABLE
-#define IP27_NO_HUBUART_INT	1
-#endif
-
 /* Translation of uncached attributes */
 #define	UATTR_HSPEC	0
 #define	UATTR_IO	1
diff --git a/include/asm-mips/sn/sn0/hubio.h b/include/asm-mips/sn/sn0/hubio.h
index f314da21b97..ef91b336355 100644
--- a/include/asm-mips/sn/sn0/hubio.h
+++ b/include/asm-mips/sn/sn0/hubio.h
@@ -486,22 +486,6 @@ typedef union h1_icrba_u {
 #define ICRBN_A_CERR_SHFT	54
 #define ICRBN_A_ERR_MASK	0x3ff
 
-#if 0	/* Disabled, this causes namespace polution and break allmodconfig */
-/*
- * Easy access macros.
- */
-#define	a_error		icrba_fields_s.error
-#define	a_ecode		icrba_fields_s.ecode
-#define	a_lnetuce	icrba_fields_s.lnetuce
-#define	a_mark		icrba_fields_s.mark
-#define	a_xerr		icrba_fields_s.xerr
-#define	a_sidn		icrba_fields_s.sidn
-#define	a_tnum		icrba_fields_s.tnum
-#define	a_addr		icrba_fields_s.addr
-#define	a_valid		icrba_fields_s.valid
-#define	a_iow		icrba_fields_s.iow
-#endif
-
 #endif /* !__ASSEMBLY__ */
 
 #define	IIO_ICRB_ADDR_SHFT	2	/* Shift to get proper address */
diff --git a/include/asm-mips/sn/sn0/hubmd.h b/include/asm-mips/sn/sn0/hubmd.h
index a66def4e0ba..1006aa26d77 100644
--- a/include/asm-mips/sn/sn0/hubmd.h
+++ b/include/asm-mips/sn/sn0/hubmd.h
@@ -92,7 +92,7 @@
 #define MD_UREG1_14		0x2200f0 /* uController/UART 1 register     */
 #define MD_UREG1_15		0x2200f8 /* uController/UART 1 register     */
 
-#ifdef CONFIG_SGI_SN0_N_MODE
+#ifdef CONFIG_SGI_SN_N_MODE
 #define MD_MEM_BANKS		4	 /* 4 banks of memory max in N mode */
 #else
 #define MD_MEM_BANKS		8	 /* 8 banks of memory max in M mode */
diff --git a/include/asm-mips/sn/sn0/hubpi.h b/include/asm-mips/sn/sn0/hubpi.h
index 355bba8552e..e39f5f9da04 100644
--- a/include/asm-mips/sn/sn0/hubpi.h
+++ b/include/asm-mips/sn/sn0/hubpi.h
@@ -398,24 +398,6 @@ typedef u64	rtc_time_t;
 
 /* PI_RT_FILTER_CTRL mask and shift definitions */
 
-#if 0
-/*
- * XXX - This register's definition has changed, but it's only implemented
- * in Hub 2.
- */
-#define PRFC_DROP_COUNT_SHFT	27
-#define PRFC_DROP_COUNT_MASK	(UINT64_CAST 0x3ff << 27)
-#define PRFC_DROP_CTR_SHFT	18
-#define PRFC_DROP_CTR_MASK	(UINT64_CAST 0x1ff << 18)
-#define PRFC_MASK_ENABLE_SHFT	10
-#define PRFC_MASK_ENABLE_MASK	(UINT64_CAST 0x7f << 10)
-#define PRFC_MASK_CTR_SHFT	2
-#define PRFC_MASK_CTR_MASK	(UINT64_CAST 0xff << 2)
-#define PRFC_OFFSET_SHFT	0
-#define PRFC_OFFSET_MASK	(UINT64_CAST 3)
-#endif /* 0 */
-
-
 /*
  * Bits for NACK_CNT_A/B and NACK_CMP
  */
diff --git a/include/asm-mips/sn/sn0/ip27.h b/include/asm-mips/sn/sn0/ip27.h
index ade0e974dd7..3c97e0855c8 100644
--- a/include/asm-mips/sn/sn0/ip27.h
+++ b/include/asm-mips/sn/sn0/ip27.h
@@ -6,7 +6,7 @@
  * Derived from IRIX <sys/SN/SN0/IP27.h>.
  *
  * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
- * Copyright (C) 1999 by Ralf Baechle
+ * Copyright (C) 1999, 2006 by Ralf Baechle
  */
 #ifndef _ASM_SN_SN0_IP27_H
 #define _ASM_SN_SN0_IP27_H
@@ -82,11 +82,4 @@
 #define SEND_NMI(_nasid, _slice)	\
           REMOTE_HUB_S((_nasid),  (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1)
 
-/* Sanity hazzard ...  Below all the Origin hacks are following.  */
-
-#define SN00_BRIDGE		0x9200000008000000
-#define SN00I_BRIDGE0		0x920000000b000000
-#define SN00I_BRIDGE1		0x920000000e000000
-#define SN00I_BRIDGE2		0x920000000f000000
-
 #endif /* _ASM_SN_SN0_IP27_H */