[MIPS] Remove IT8172-based platforms, ITE 8172G and Globespan IVR support.

As per feature-removal-schedule.txt.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 files changed, 0 insertions, 852 deletions

diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h
index 78c35ec4636..1e5ccdad3b0 100644
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -125,12 +125,6 @@
 #define  MACH_MOMENCO_OCELOT_3	4
 
 /*
- * Valid machtype for group ITE
- */
-#define MACH_GROUP_ITE		13	/* ITE Semi Eval Boards		*/
-#define  MACH_QED_4N_S01B	0	/* ITE8172 based eval board */
-
-/*
  * Valid machtype for group PHILIPS
  */
 #define MACH_GROUP_PHILIPS     14
@@ -139,12 +133,6 @@
 #define  MACH_PHILIPS_JBS	2	/* JBS */
 
 /*
- * Valid machtype for group Globespan
- */
-#define MACH_GROUP_GLOBESPAN   15	/* Globespan */
-#define  MACH_IVR		0	/* IVR eval board */
-
-/*
  * Valid machtype for group SIBYTE
  */
 #define MACH_GROUP_SIBYTE	16	/* Sibyte / Broadcom */
diff --git a/include/asm-mips/it8172/it8172.h b/include/asm-mips/it8172/it8172.h
deleted file mode 100644
index 8f23af0a1ee..00000000000
--- a/include/asm-mips/it8172/it8172.h
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	IT8172 system controller defines.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __IT8172__H__
-#define __IT8172__H__
-
-#include <asm/addrspace.h>
-
-#define IT8172_BASE			0x18000000
-#define IT8172_PCI_IO_BASE		0x14000000
-#define IT8172_PCI_MEM_BASE		0x10000000
-
-// System registers offsets from IT8172_BASE
-#define IT_CMFPCR			0x0
-#define IT_DSRR				0x2
-#define IT_PCDCR			0x4
-#define IT_SPLLCR			0x6
-#define IT_CIDR				0x10
-#define IT_CRNR				0x12
-#define IT_CPUTR			0x14
-#define IT_CTCR				0x16
-#define IT_SDPR				0xF0
-
-// Power management register offset from IT8172_PCI_IO_BASE
-// Power Management Device Standby Register
-#define IT_PM_DSR		0x15800
-
-#define IT_PM_DSR_TMR0SB	0x0001
-#define IT_PM_DSR_TMR1SB	0x0002
-#define IT_PM_DSR_CIR0SB	0x0004
-#define IT_PM_DSR_CIR1SB	0x0008
-#define IT_PM_DSR_SCR0SB	0x0010
-#define IT_PM_DSR_SCR1SB	0x0020
-#define IT_PM_DSR_PPSB		0x0040
-#define IT_PM_DSR_I2CSB		0x0080
-#define IT_PM_DSR_UARTSB	0x0100
-#define IT_PM_DSR_IDESB		0x0200
-#define IT_PM_DSR_ACSB		0x0400
-#define IT_PM_DSR_M68KSB	0x0800
-
-// Power Management PCI Device Software Reset Register
-#define IT_PM_PCISR             0x15802
-
-#define IT_PM_PCISR_IDESR       0x0001
-#define IT_PM_PCISR_CDMASR      0x0002
-#define IT_PM_PCISR_USBSR       0x0004
-#define IT_PM_PCISR_DMASR       0x0008
-#define IT_PM_PCISR_ACSR        0x0010
-#define IT_PM_PCISR_MEMSR       0x0020
-#define IT_PM_PCISR_68KSR       0x0040
-
-
-// PCI Configuration address and data register offsets
-// from IT8172_BASE
-#define IT_CONFADDR			0x4000
-#define IT_BUSNUM_SHF                   16
-#define IT_DEVNUM_SHF                   11
-#define IT_FUNCNUM_SHF                  8
-#define IT_REGNUM_SHF                   2
-
-#define IT_CONFDATA			0x4004
-
-// PCI configuration header common register offsets
-#define IT_VID				0x00
-#define IT_DID				0x02
-#define IT_PCICMD			0x04
-#define IT_PCISTS			0x06
-#define IT_RID				0x08
-#define IT_CLASSC			0x09
-#define IT_HEADT			0x0E
-#define IT_SERIRQC			0x49
-
-// PCI to Internal/LPC Bus Bridge configuration header register offset
-#define IT_P2I_BCR				0x4C
-#define IT_P2I_D0IOSC				0x50
-#define IT_P2I_D1IOSC				0x54
-#define IT_P2I_D2IOSC				0x58
-#define IT_P2I_D3IOSC				0x5C
-#define IT_P2I_D4IOSC				0x60
-#define IT_P2I_D5IOSC				0x64
-#define IT_P2I_D6IOSC				0x68
-#define IT_P2I_D7IOSC				0x6C
-#define IT_P2I_D8IOSC				0x70
-#define IT_P2I_D9IOSC				0x74
-#define IT_P2I_D10IOSC				0x78
-#define IT_P2I_D11IOSC				0x7C
-
-// Memory controller register offsets from IT8172_BASE
-#define IT_MC_SDRMR					0x1000
-#define IT_MC_SDRTR					0x1004
-#define IT_MC_MCR					0x1008
-#define IT_MC_SDTYPE					0x100C
-#define IT_MC_WPBA					0x1010
-#define IT_MC_WPTA					0x1014
-#define IT_MC_HATR					0x1018
-#define IT_MC_PCICR					0x101C
-
-// Flash/ROM control register offsets from IT8172_BASE
-#define IT_FC_BRCR					0x2000
-#define IT_FC_FCR					0x2004
-#define IT_FC_DCR					0x2008
-
-// M68K interface bridge configuration header register offset
-#define IT_M68K_MBCSR					0x54
-#define IT_M68K_TMR					0x58
-#define IT_M68K_BCR					0x5C
-#define IT_M68K_BSR					0x5D
-#define IT_M68K_DTR					0x5F
-
-// Register offset from IT8172_PCI_IO_BASE
-// These registers are accessible through 8172 PCI IO window.
-
-// INTC
-#define IT_INTC_BASE				0x10000
-#define IT_INTC_LBDNIRR				0x10000
-#define IT_INTC_LBDNIMR				0x10002
-#define IT_INTC_LBDNITR				0x10004
-#define IT_INTC_LBDNIAR				0x10006
-#define IT_INTC_LPCNIRR				0x10010
-#define IT_INTC_LPCNIMR				0x10012
-#define IT_INTC_LPCNITR				0x10014
-#define IT_INTC_LPCNIAR				0x10016
-#define IT_INTC_PDNIRR				0x10020
-#define IT_INTC_PDNIMR				0x10022
-#define IT_INTC_PDNITR				0x10024
-#define IT_INTC_PDNIAR				0x10026
-#define IT_INTC_UMNIRR				0x10030
-#define IT_INTC_UMNITR				0x10034
-#define IT_INTC_UMNIAR				0x10036
-#define IT_INTC_TYPER				0x107FE
-
-// IT8172 PCI device number
-#define IT_C2P_DEVICE				0
-#define IT_AUDIO_DEVICE				1
-#define IT_DMAC_DEVICE				1
-#define IT_CDMAC_DEVICE				1
-#define IT_USB_DEVICE				1
-#define IT_P2I_DEVICE				1
-#define IT_IDE_DEVICE				1
-#define IT_M68K_DEVICE				1
-
-// IT8172 PCI function number
-#define IT_C2P_FUNCION				0
-#define IT_AUDIO_FUNCTION			0
-#define IT_DMAC_FUNCTION			1
-#define IT_CDMAC_FUNCTION			2
-#define IT_USB_FUNCTION				3
-#define IT_P2I_FUNCTION				4
-#define IT_IDE_FUNCTION				5
-#define IT_M68K_FUNCTION			6
-
-// IT8172 GPIO
-#define IT_GPADR				0x13800
-#define IT_GPBDR				0x13808
-#define IT_GPCDR				0x13810
-#define IT_GPACR				0x13802
-#define IT_GPBCR				0x1380A
-#define IT_GPCCR				0x13812
-#define IT_GPAICR				0x13804
-#define IT_GPBICR				0x1380C
-#define IT_GPCICR				0x13814
-#define IT_GPAISR				0x13806
-#define IT_GPBISR				0x1380E
-#define IT_GPCISR				0x13816
-#define IT_GCR					0x13818
-
-// IT8172 RTC
-#define IT_RTC_BASE				0x14800
-#define IT_RTC_CENTURY				0x14808
-
-#define IT_RTC_RIR0				0x00
-#define IT_RTC_RTR0				0x01
-#define IT_RTC_RIR1				0x02
-#define IT_RTC_RTR1				0x03
-#define IT_RTC_RIR2				0x04
-#define IT_RTC_RTR2				0x05
-#define IT_RTC_RCTR				0x08
-#define IT_RTC_RA				0x0A
-#define IT_RTC_RB				0x0B
-#define IT_RTC_RC				0x0C
-#define IT_RTC_RD				0x0D
-
-#define RTC_SEC_INDEX				0x00
-#define RTC_MIN_INDEX				0x02
-#define RTC_HOUR_INDEX				0x04
-#define RTC_DAY_INDEX				0x06
-#define RTC_DATE_INDEX				0x07
-#define RTC_MONTH_INDEX				0x08
-#define RTC_YEAR_INDEX				0x09
-
-// IT8172 internal device registers
-#define IT_TIMER_BASE				0x10800
-#define IT_CIR0_BASE				0x11000
-#define IT_UART_BASE				0x11800
-#define IT_SCR0_BASE				0x12000
-#define IT_SCR1_BASE				0x12800
-#define IT_PP_BASE				0x13000
-#define IT_I2C_BASE				0x14000
-#define IT_CIR1_BASE				0x15000
-
-// IT8172 Smart Card Reader offsets from IT_SCR*_BASE
-#define IT_SCR_SFR				0x08
-#define IT_SCR_SCDR				0x09
-
-// IT8172 IT_SCR_SFR bit definition & mask
-#define	IT_SCR_SFR_GATE_UART			0x40
-#define	IT_SCR_SFR_GATE_UART_BIT		6
-#define IT_SCR_SFR_GATE_UART_OFF		0
-#define	IT_SCR_SFR_GATE_UART_ON			1
-#define	IT_SCR_SFR_FET_CHARGE			0x30
-#define	IT_SCR_SFR_FET_CHARGE_BIT		4
-#define IT_SCR_SFR_FET_CHARGE_3_3_US		3
-#define IT_SCR_SFR_FET_CHARGE_13_US		2
-#define IT_SCR_SFR_FET_CHARGE_53_US		1
-#define IT_SCR_SFR_FET_CHARGE_213_US		0
-#define	IT_SCR_SFR_CARD_FREQ			0x0C
-#define	IT_SCR_SFR_CARD_FREQ_BIT		2
-#define IT_SCR_SFR_CARD_FREQ_STOP		3
-#define IT_SCR_SFR_CARD_FREQ_3_5_MHZ		0
-#define IT_SCR_SFR_CARD_FREQ_7_1_MHZ		2
-#define IT_SCR_SFR_CARD_FREQ_96_DIV_MHZ		1
-#define	IT_SCR_SFR_FET_ACTIVE			0x02
-#define	IT_SCR_SFR_FET_ACTIVE_BIT		1
-#define IT_SCR_SFR_FET_ACTIVE_INVERT		0
-#define IT_SCR_SFR_FET_ACTIVE_NONINVERT		1
-#define	IT_SCR_SFR_ENABLE			0x01
-#define	IT_SCR_SFR_ENABLE_BIT			0
-#define IT_SCR_SFR_ENABLE_OFF			0
-#define IT_SCR_SFR_ENABLE_ON			1
-
-// IT8172 IT_SCR_SCDR bit definition & mask
-#define	IT_SCR_SCDR_RESET_MODE			0x80
-#define	IT_SCR_SCDR_RESET_MODE_BIT		7
-#define	IT_SCR_SCDR_RESET_MODE_ASYNC		0
-#define IT_SCR_SCDR_RESET_MODE_SYNC		1
-#define	IT_SCR_SCDR_DIVISOR			0x7F
-#define	IT_SCR_SCDR_DIVISOR_BIT			0
-#define	IT_SCR_SCDR_DIVISOR_STOP_VAL_1		0x00
-#define	IT_SCR_SCDR_DIVISOR_STOP_VAL_2		0x01
-#define	IT_SCR_SCDR_DIVISOR_STOP_VAL_3		0x7F
-
-// IT8172 DMA
-#define IT_DMAC_BASE				0x16000
-#define IT_DMAC_BCAR0				0x00
-#define IT_DMAC_BCAR1				0x04
-#define IT_DMAC_BCAR2				0x08
-#define IT_DMAC_BCAR3				0x0C
-#define IT_DMAC_BCCR0				0x02
-#define IT_DMAC_BCCR1				0x06
-#define IT_DMAC_BCCR2				0x0a
-#define IT_DMAC_BCCR3				0x0e
-#define IT_DMAC_CR				0x10
-#define IT_DMAC_SR				0x12
-#define IT_DMAC_ESR				0x13
-#define IT_DMAC_RQR				0x14
-#define IT_DMAC_MR				0x16
-#define IT_DMAC_EMR				0x17
-#define IT_DMAC_MKR				0x18
-#define IT_DMAC_PAR0				0x20
-#define IT_DMAC_PAR1				0x22
-#define IT_DMAC_PAR2				0x24
-#define IT_DMAC_PAR3				0x26
-
-// IT8172 IDE
-#define IT_IDE_BASE				0x17800
-#define IT_IDE_STATUS				0x1F7
-
-// IT8172 Audio Controller
-#define IT_AC_BASE				0x17000
-#define	IT_AC_PCMOV				0x00
-#define IT_AC_FMOV				0x02
-#define	IT_AC_I2SV				0x04
-#define IT_AC_DRSS				0x06
-#define IT_AC_PCC				0x08
-#define IT_AC_PCDL				0x0A
-#define IT_AC_PCB1STA				0x0C
-#define IT_AC_PCB2STA				0x10
-#define IT_AC_CAPCC				0x14
-#define IT_AC_CAPCDL				0x16
-#define IT_AC_CAPB1STA				0x18
-#define IT_AC_CAPB2STA				0x1C
-#define IT_AC_CODECC				0x22
-#define IT_AC_I2SMC				0x24
-#define IT_AC_VS				0x26
-#define IT_AC_SRCS				0x28
-#define IT_AC_CIRCP				0x2A
-#define IT_AC_CIRDP				0x2C
-#define IT_AC_TM				0x4A
-#define IT_AC_PFDP				0x4C
-#define IT_AC_GC				0x54
-#define IT_AC_IMC				0x56
-#define IT_AC_ISC				0x5B
-#define IT_AC_OPL3SR				0x68
-#define IT_AC_OPL3DWDR				0x69
-#define IT_AC_OPL3AB1W				0x6A
-#define IT_AC_OPL3DW				0x6B
-#define IT_AC_BPDC				0x70
-
-
-// IT8172 Timer
-#define IT_TIMER_BASE				0x10800
-#define	TIMER_TCVR0				0x00
-#define TIMER_TRVR0				0x02
-#define	TIMER_TCR0				0x04
-#define TIMER_TIRR				0x06
-#define	TIMER_TCVR1				0x08
-#define TIMER_TRVR1				0x0A
-#define	TIMER_TCR1				0x0C
-#define TIMER_TIDR				0x0E
-
-
-#define IT_WRITE(ofs, data) *(volatile u32 *)KSEG1ADDR((IT8172_BASE+ofs)) = data
-#define IT_READ(ofs, data)  data = *(volatile u32 *)KSEG1ADDR((IT8172_BASE+ofs))
-
-#define IT_IO_WRITE(ofs, data) *(volatile u32 *)KSEG1ADDR((IT8172_PCI_IO_BASE+ofs)) = data
-#define IT_IO_READ(ofs, data)  data = *(volatile u32 *)KSEG1ADDR((IT8172_PCI_IO_BASE+ofs))
-
-#define IT_IO_WRITE16(ofs, data) *(volatile u16 *)KSEG1ADDR((IT8172_PCI_IO_BASE+ofs)) = data
-#define IT_IO_READ16(ofs, data)  data = *(volatile u16 *)KSEG1ADDR((IT8172_PCI_IO_BASE+ofs))
-
-#endif
diff --git a/include/asm-mips/it8172/it8172_cir.h b/include/asm-mips/it8172/it8172_cir.h
deleted file mode 100644
index 6a1dbd29f6d..00000000000
--- a/include/asm-mips/it8172/it8172_cir.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	IT8172 Consumer IR port defines.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#define NUM_CIR_PORTS 2
-
-/* Master Control Register */
-#define CIR_RESET              0x1
-#define CIR_FIFO_CLEAR         0x2
-#define CIR_SET_FIFO_TL(x)     (((x)&0x3)<<2)
-#define CIR_ILE                0x10
-#define CIR_ILSEL              0x20
-
-/* Interrupt Enable Register */
-#define CIR_TLDLIE             0x1
-#define CIR_RDAIE              0x2
-#define CIR_RFOIE              0x4
-#define CIR_IEC                0x80
-
-/* Interrupt Identification Register */
-#define CIR_TLDLI              0x1
-#define CIR_RDAI               0x2
-#define CIR_RFOI               0x4
-#define CIR_NIP                0x80
-
-/* Carrier Frequency Register */
-#define CIR_SET_CF(x)          ((x)&0x1f)
-  #define CFQ_38_480           0xB       /* 38 KHz low, 480 KHz high */
-#define CIR_HCFS               0x20
-  #define CIR_SET_HS(x)        (((x)&0x1)<<5)
-
-
-/* Receiver Control Register */
-#define CIR_SET_RXDCR(x)       ((x)&0x7)
-#define CIR_RXACT              0x8
-#define CIR_RXEND              0x10
-#define CIR_RDWOS              0x20
-  #define CIR_SET_RDWOS(x)     (((x)&0x1)<<5)
-#define CIR_RXEN               0x80
-
-/* Transmitter Control Register */
-#define CIR_SET_TXMPW(x)       ((x)&0x7)
-#define CIR_SET_TXMPM(x)       (((x)&0x3)<<3)
-#define CIR_TXENDF             0x20
-#define CIR_TXRLE              0x40
-
-/* Receiver FIFO Status Register */
-#define CIR_RXFBC_MASK         0x3f
-#define CIR_RXFTO              0x80
-
-/* Wakeup Code Length Register */
-#define CIR_SET_WCL            ((x)&0x3f)
-#define CIR_WCL_MASK(x)        ((x)&0x3f)
-
-/* Wakeup Power Control/Status Register */
-#define CIR_BTMON              0x2
-#define CIR_CIRON              0x4
-#define CIR_RCRST              0x10
-#define CIR_WCRST              0x20
-
-struct cir_port {
-	int port;
-	unsigned short baud_rate;
-	unsigned char fifo_tl;
-	unsigned char cfq;
-	unsigned char hcfs;
-	unsigned char rdwos;
-	unsigned char rxdcr;
-};
-
-struct it8172_cir_regs {
-	unsigned char dr;       /* data                        */
-	char pad;
-	unsigned char mstcr;    /* master control              */
-	char pad1;
-	unsigned char ier;      /* interrupt enable            */
-	char pad2;
-	unsigned char iir;      /* interrupt identification    */
-	char pad3;
-	unsigned char cfr;      /* carrier frequency           */
-	char pad4;
-	unsigned char rcr;      /* receiver control            */
-	char pad5;
-	unsigned char tcr;      /* transmitter control         */
-	char pad6;
-	char pad7;
-	char pad8;
-	unsigned char bdlr;     /* baud rate divisor low byte  */
-	char pad9;
-	unsigned char bdhr;     /* baud rate divisor high byte */
-	char pad10;
-	unsigned char tfsr;     /* tx fifo byte count          */
-	char pad11;
-	unsigned char rfsr;     /* rx fifo status              */
-	char pad12;
-	unsigned char wcl;      /* wakeup code length          */
-	char pad13;
-	unsigned char wcr;      /* wakeup code read/write      */
-	char pad14;
-	unsigned char wps;      /* wakeup power control/status */
-};
-
-int cir_port_init(struct cir_port *cir);
-extern void clear_fifo(struct cir_port *cir);
-extern void enable_receiver(struct cir_port *cir);
-extern void disable_receiver(struct cir_port *cir);
-extern void enable_rx_demodulation(struct cir_port *cir);
-extern void disable_rx_demodulation(struct cir_port *cir);
-extern void set_rx_active(struct cir_port *cir);
-extern void int_enable(struct cir_port *cir);
-extern void rx_int_enable(struct cir_port *cir);
-extern char get_int_status(struct cir_port *cir);
-extern int cir_get_rx_count(struct cir_port *cir);
-extern char cir_read_data(struct cir_port *cir);
diff --git a/include/asm-mips/it8172/it8172_dbg.h b/include/asm-mips/it8172/it8172_dbg.h
deleted file mode 100644
index f404ec7c03a..00000000000
--- a/include/asm-mips/it8172/it8172_dbg.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Function prototypes for low level uart routines to
- *	directly access a 16550 uart.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/types.h>
-
-extern void putch(const unsigned char c);
-extern void puts(unsigned char *cp);
-extern void fputs(unsigned char *cp);
-extern void put64(uint64_t ul);
-extern void put32(unsigned u);
diff --git a/include/asm-mips/it8172/it8172_int.h b/include/asm-mips/it8172/it8172_int.h
deleted file mode 100644
index 837e83ac25f..00000000000
--- a/include/asm-mips/it8172/it8172_int.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	ITE 8172 Interrupt Numbering
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _MIPS_ITEINT_H
-#define _MIPS_ITEINT_H
-
-/*
- * Here's the "strategy":
- * We number the LPC serial irqs from 0 to 15,
- * the local bus irqs from 16 to 31,
- * the pci dev register interrupts from 32 to 47,
- * and the non-maskable ints from 48 to 53.
- */
-
-#define IT8172_LPC_IRQ_BASE  0    /* first LPC int number */
-#define IT8172_SERIRQ_0      (IT8172_LPC_IRQ_BASE + 0)
-#define IT8172_SERIRQ_1      (IT8172_LPC_IRQ_BASE + 1)
-#define IT8172_SERIRQ_2      (IT8172_LPC_IRQ_BASE + 2)
-#define IT8172_SERIRQ_3      (IT8172_LPC_IRQ_BASE + 3)
-#define IT8172_SERIRQ_4      (IT8172_LPC_IRQ_BASE + 4)
-#define IT8172_SERIRQ_5      (IT8172_LPC_IRQ_BASE + 5)
-#define IT8172_SERIRQ_6      (IT8172_LPC_IRQ_BASE + 6)
-#define IT8172_SERIRQ_7      (IT8172_LPC_IRQ_BASE + 7)
-#define IT8172_SERIRQ_8      (IT8172_LPC_IRQ_BASE + 8)
-#define IT8172_SERIRQ_9      (IT8172_LPC_IRQ_BASE + 9)
-#define IT8172_SERIRQ_10     (IT8172_LPC_IRQ_BASE + 10)
-#define IT8172_SERIRQ_11     (IT8172_LPC_IRQ_BASE + 11)
-#define IT8172_SERIRQ_12     (IT8172_LPC_IRQ_BASE + 12)
-#define IT8172_SERIRQ_13     (IT8172_LPC_IRQ_BASE + 13)
-#define IT8172_SERIRQ_14     (IT8172_LPC_IRQ_BASE + 14)
-#define IT8172_SERIRQ_15     (IT8172_LPC_IRQ_BASE + 15)
-
-#define IT8172_LB_IRQ_BASE  16   /* first local bus int number */
-#define IT8172_PPR_IRQ          (IT8172_LB_IRQ_BASE + 0) /* parallel port */
-#define IT8172_TIMER0_IRQ       (IT8172_LB_IRQ_BASE + 1)
-#define IT8172_TIMER1_IRQ       (IT8172_LB_IRQ_BASE + 2)
-#define IT8172_I2C_IRQ          (IT8172_LB_IRQ_BASE + 3)
-#define IT8172_GPIO_IRQ         (IT8172_LB_IRQ_BASE + 4)
-#define IT8172_CIR0_IRQ         (IT8172_LB_IRQ_BASE + 5)
-#define IT8172_CIR1_IRQ         (IT8172_LB_IRQ_BASE + 6)
-#define IT8172_UART_IRQ         (IT8172_LB_IRQ_BASE + 7)
-#define IT8172_SCR0_IRQ         (IT8172_LB_IRQ_BASE + 8)
-#define IT8172_SCR1_IRQ         (IT8172_LB_IRQ_BASE + 9)
-#define IT8172_RTC_IRQ          (IT8172_LB_IRQ_BASE + 10)
-#define IT8172_IOCHK_IRQ        (IT8172_LB_IRQ_BASE + 11)
-/* 12 - 15 reserved */
-
-/*
- * Note here that the pci dev registers includes bits for more than
- * just the pci devices.
- */
-#define IT8172_PCI_DEV_IRQ_BASE  32   /* first pci dev irq */
-#define IT8172_AC97_IRQ          (IT8172_PCI_DEV_IRQ_BASE + 0)
-#define IT8172_MC68K_IRQ         (IT8172_PCI_DEV_IRQ_BASE + 1)
-#define IT8172_IDE_IRQ           (IT8172_PCI_DEV_IRQ_BASE + 2)
-#define IT8172_USB_IRQ           (IT8172_PCI_DEV_IRQ_BASE + 3)
-#define IT8172_BRIDGE_MASTER_IRQ (IT8172_PCI_DEV_IRQ_BASE + 4)
-#define IT8172_BRIDGE_TARGET_IRQ (IT8172_PCI_DEV_IRQ_BASE + 5)
-#define IT8172_PCI_INTA_IRQ      (IT8172_PCI_DEV_IRQ_BASE + 6)
-#define IT8172_PCI_INTB_IRQ      (IT8172_PCI_DEV_IRQ_BASE + 7)
-#define IT8172_PCI_INTC_IRQ      (IT8172_PCI_DEV_IRQ_BASE + 8)
-#define IT8172_PCI_INTD_IRQ      (IT8172_PCI_DEV_IRQ_BASE + 9)
-#define IT8172_S_INTA_IRQ        (IT8172_PCI_DEV_IRQ_BASE + 10)
-#define IT8172_S_INTB_IRQ        (IT8172_PCI_DEV_IRQ_BASE + 11)
-#define IT8172_S_INTC_IRQ        (IT8172_PCI_DEV_IRQ_BASE + 12)
-#define IT8172_S_INTD_IRQ        (IT8172_PCI_DEV_IRQ_BASE + 13)
-#define IT8172_CDMA_IRQ          (IT8172_PCI_DEV_IRQ_BASE + 14)
-#define IT8172_DMA_IRQ           (IT8172_PCI_DEV_IRQ_BASE + 15)
-
-#define IT8172_NMI_IRQ_BASE      48
-#define IT8172_SER_NMI_IRQ       (IT8172_NMI_IRQ_BASE + 0)
-#define IT8172_PCI_NMI_IRQ       (IT8172_NMI_IRQ_BASE + 1)
-#define IT8172_RTC_NMI_IRQ       (IT8172_NMI_IRQ_BASE + 2)
-#define IT8172_CPUIF_NMI_IRQ     (IT8172_NMI_IRQ_BASE + 3)
-#define IT8172_PMER_NMI_IRQ      (IT8172_NMI_IRQ_BASE + 4)
-#define IT8172_POWER_NMI_IRQ     (IT8172_NMI_IRQ_BASE + 5)
-
-#define IT8172_LAST_IRQ          (IT8172_POWER_NMI_IRQ)
-/* Finally, let's move over here the mips cpu timer interrupt.
- */
-#define MIPS_CPU_TIMER_IRQ       (NR_IRQS-1)
-
-/*
- * IT8172 Interrupt Controller Registers
- */
-struct it8172_intc_regs {
-        volatile unsigned short lb_req;      /* offset 0 */
-        volatile unsigned short lb_mask;
-        volatile unsigned short lb_trigger;
-        volatile unsigned short lb_level;
-	unsigned char pad0[8];
-
-        volatile unsigned short lpc_req;     /* offset 0x10 */
-        volatile unsigned short lpc_mask;
-        volatile unsigned short lpc_trigger;
-        volatile unsigned short lpc_level;
-	unsigned char pad1[8];
-
-        volatile unsigned short pci_req;     /* offset 0x20 */
-        volatile unsigned short pci_mask;
-        volatile unsigned short pci_trigger;
-        volatile unsigned short pci_level;
-	unsigned char pad2[8];
-
-        volatile unsigned short nmi_req;     /* offset 0x30 */
-        volatile unsigned short nmi_mask;
-        volatile unsigned short nmi_trigger;
-        volatile unsigned short nmi_level;
-	unsigned char pad3[6];
-
-        volatile unsigned short nmi_redir;   /* offset 0x3E */
-	unsigned char pad4[0xBE];
-
-        volatile unsigned short intstatus;    /* offset 0xFE */
-};
-
-#endif /* _MIPS_ITEINT_H */
diff --git a/include/asm-mips/it8172/it8172_pci.h b/include/asm-mips/it8172/it8172_pci.h
deleted file mode 100644
index 42c61f56eeb..00000000000
--- a/include/asm-mips/it8172/it8172_pci.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	IT8172 system controller specific pci defines.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _8172PCI_H_
-#define _8172PCI_H_
-
-// PCI configuration space Type0
-#define	PCI_IDREG	0x00
-#define	PCI_CMDSTSREG	0x04
-#define	PCI_CLASSREG	0x08
-#define	PCI_BHLCREG	0x0C
-#define	PCI_BASE1REG	0x10
-#define	PCI_BASE2REG	0x14
-#define	PCI_BASE3REG	0x18
-#define	PCI_BASE4REG	0x1C
-#define	PCI_BASE5REG	0x20
-#define	PCI_BASE6REG	0x24
-#define	PCI_ROMBASEREG	0x30
-#define	PCI_INTRREG	0x3C
-
-// PCI configuration space Type1
-#define	PCI_BUSNOREG	0x18
-
-#define	IT_PCI_VENDORID(x)	((x) & 0xFFFF)
-#define	IT_PCI_DEVICEID(x)	(((x)>>16) & 0xFFFF)
-
-// Command register
-#define	PCI_CMD_IOEN		0x00000001
-#define	PCI_CMD_MEMEN		0x00000002
-#define	PCI_CMD_BUSMASTER	0x00000004
-#define	PCI_CMD_SPCYCLE		0x00000008
-#define	PCI_CMD_WRINV		0x00000010
-#define	PCI_CMD_VGASNOOP	0x00000020
-#define	PCI_CMD_PERR		0x00000040
-#define	PCI_CMD_WAITCTRL	0x00000080
-#define	PCI_CMD_SERR		0x00000100
-#define	PCI_CMD_FAST_BACKTOBACK	0x00000200
-
-// Status register
-#define	PCI_STS_66MHZ		0x00200000
-#define	PCI_STS_SUPPORT_UDF	0x00400000
-#define	PCI_STS_FAST_BACKTOBACK	0x00800000
-#define	PCI_STS_DATA_PERR	0x01000000
-#define	PCI_STS_DEVSEL0		0x02000000
-#define	PCI_STS_DEVSEL1		0x04000000
-#define	PCI_STS_SIG_TGTABORT	0x08000000
-#define	PCI_STS_RCV_TGTABORT	0x10000000
-#define	PCI_STS_RCV_MSTABORT	0x20000000
-#define	PCI_STS_SYSERR		0x40000000
-#define	PCI_STS_DETCT_PERR	0x80000000
-
-#define	IT_PCI_CLASS(x)		(((x)>>24) & 0xFF)
-#define	IT_PCI_SUBCLASS(x)		(((x)>>16) & 0xFF)
-#define	IT_PCI_INTERFACE(x)	(((x)>>8) & 0xFF)
-#define	IT_PCI_REVISION(x)		((x) & 0xFF)
-
-// PCI class code
-#define	PCI_CLASS_BRIDGE			0x06
-
-// bridge subclass
-#define	PCI_SUBCLASS_BRIDGE_HOST		0x00
-#define	PCI_SUBCLASS_BRIDGE_PCI			0x04
-
-// BHLCREG
-#define	IT_PCI_BIST(x)		(((x)>>24) & 0xFF)
-#define	IT_PCI_HEADERTYPE(x)	(((x)>>16) & 0xFF)
-#define	IT_PCI_LATENCYTIMER(x)	(((x)>>8) & 0xFF)
-#define	IT_PCI_CACHELINESIZE(x)	((x) & 0xFF)
-
-#define	PCI_MULTIFUNC	0x80
-
-// INTRREG
-#define	IT_PCI_MAXLAT(x)		(((x)>>24) & 0xFF)
-#define	IT_PCI_MINGNT(x)		(((x)>>16) & 0xFF)
-#define	IT_PCI_INTRPIN(x)		(((x)>>8) & 0xFF)
-#define	IT_PCI_INTRLINE(x)		((x) & 0xFF)
-
-#define	PCI_VENDOR_NEC	0x1033
-#define PCI_VENDOR_DEC	0x1101
-
-#endif // _8172PCI_H_
diff --git a/include/asm-mips/it8712.h b/include/asm-mips/it8712.h
deleted file mode 100644
index ca2dee02a01..00000000000
--- a/include/asm-mips/it8712.h
+++ /dev/null
@@ -1,28 +0,0 @@
-
-#ifndef __IT8712_H__
-#define __IT8712_H__
-
-#define LPC_BASE_ADDR	0x14000000
-
-// MB PnP configuration register
-#define LPC_KEY_ADDR	0x1400002E
-#define LPC_DATA_ADDR	0x1400002F
-
-// Device LDN
-#define LDN_SERIAL1	0x01
-#define LDN_SERIAL2	0x02
-#define LDN_PARALLEL	0x03
-#define LDN_KEYBOARD	0x05
-#define LDN_MOUSE	0x06
-
-#define IT8712_UART1_PORT      0x3F8
-#define IT8712_UART2_PORT      0x2F8
-
-#ifndef ASM_ONLY
-
-void LPCSetConfig(char LdnNumber, char Index, char data);
-char LPCGetConfig(char LdnNumber, char Index);
-
-#endif
-
-#endif
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
index c882e04e149..d7a65135d83 100644
--- a/include/asm-mips/serial.h
+++ b/include/asm-mips/serial.h
@@ -69,38 +69,6 @@
 #define EV64120_SERIAL_PORT_DEFNS
 #endif
 
-#ifdef CONFIG_MIPS_ITE8172
-#include <asm/it8172/it8172.h>
-#include <asm/it8172/it8172_int.h>
-#include <asm/it8712.h>
-#define ITE_SERIAL_PORT_DEFNS                                  \
-    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
-      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
-    { .baud_base = (24000000/(16*13)), .port = (IT8172_PCI_IO_BASE + IT8712_UART1_PORT), \
-      .irq = IT8172_SERIRQ_4, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
-    /* Smart Card Reader 0 */ \
-    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR0_BASE), \
-      .irq = IT8172_SCR0_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
-    /* Smart Card Reader 1 */ \
-    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
-      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 },
-#else
-#define ITE_SERIAL_PORT_DEFNS
-#endif
-
-#ifdef CONFIG_MIPS_IVR
-#include <asm/it8172/it8172.h>
-#include <asm/it8172/it8172_int.h>
-#define IVR_SERIAL_PORT_DEFNS                                  \
-    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
-      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 },         \
-    /* Smart Card Reader 1 */ \
-    { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
-      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 },
-#else
-#define IVR_SERIAL_PORT_DEFNS
-#endif
-
 #ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT
 #define STD_SERIAL_PORT_DEFNS			\
 	/* UART CLK   PORT IRQ     FLAGS        */			\
@@ -240,8 +208,6 @@
 	DDB5477_SERIAL_PORT_DEFNS			\
 	EV64120_SERIAL_PORT_DEFNS			\
 	IP32_SERIAL_PORT_DEFNS                          \
-	ITE_SERIAL_PORT_DEFNS           		\
-	IVR_SERIAL_PORT_DEFNS           		\
 	JAZZ_SERIAL_PORT_DEFNS				\
 	STD_SERIAL_PORT_DEFNS				\
 	MOMENCO_OCELOT_G_SERIAL_PORT_DEFNS		\