[PATCH] powerpc: Move various ppc64 files with no ppc32 equivalent to powerpc

This patch moves a bunch of files from arch/ppc64 and
include/asm-ppc64 which have no equivalents in ppc32 code into
arch/powerpc and include/asm-powerpc.  The file affected are:
	abs_addr.h
	compat.h
	lppaca.h
	paca.h
	tce.h
	cpu_setup_power4.S
	ioctl32.c
	firmware.c
	pacaData.c

The only changes apart from the move and corresponding Makefile
changes are:
	- #ifndef/#define in includes updated to _ASM_POWERPC_ form
	- trailing whitespace removed
	- comments giving full paths removed
	- pacaData.c renamed paca.c to remove studlyCaps
	- Misplaced { moved in lppaca.h

Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built
for 32-bit powermac (ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 120 insertions, 0 deletions

diff --git a/include/asm-powerpc/paca.h b/include/asm-powerpc/paca.h
new file mode 100644
index 00000000000..92c765c35bd
--- /dev/null
+++ b/include/asm-powerpc/paca.h
@@ -0,0 +1,120 @@
+/*
+ * include/asm-powerpc/paca.h
+ *
+ * This control block defines the PACA which defines the processor
+ * specific data for each logical processor on the system.
+ * There are some pointers defined that are utilized by PLIC.
+ *
+ * C 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_PACA_H
+#define _ASM_POWERPC_PACA_H
+
+#include	<linux/config.h>
+#include	<asm/types.h>
+#include	<asm/lppaca.h>
+#include	<asm/iseries/it_lp_reg_save.h>
+#include	<asm/mmu.h>
+
+register struct paca_struct *local_paca asm("r13");
+#define get_paca()	local_paca
+
+struct task_struct;
+
+/*
+ * Defines the layout of the paca.
+ *
+ * This structure is not directly accessed by firmware or the service
+ * processor except for the first two pointers that point to the
+ * lppaca area and the ItLpRegSave area for this CPU.  Both the
+ * lppaca and ItLpRegSave objects are currently contained within the
+ * PACA but they do not need to be.
+ */
+struct paca_struct {
+	/*
+	 * Because hw_cpu_id, unlike other paca fields, is accessed
+	 * routinely from other CPUs (from the IRQ code), we stick to
+	 * read-only (after boot) fields in the first cacheline to
+	 * avoid cacheline bouncing.
+	 */
+
+	/*
+	 * MAGIC: These first two pointers can't be moved - they're
+	 * accessed by the firmware
+	 */
+	struct lppaca *lppaca_ptr;	/* Pointer to LpPaca for PLIC */
+	struct ItLpRegSave *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
+
+	/*
+	 * MAGIC: the spinlock functions in arch/ppc64/lib/locks.c
+	 * load lock_token and paca_index with a single lwz
+	 * instruction.  They must travel together and be properly
+	 * aligned.
+	 */
+	u16 lock_token;			/* Constant 0x8000, used in locks */
+	u16 paca_index;			/* Logical processor number */
+
+	u32 default_decr;		/* Default decrementer value */
+	u64 kernel_toc;			/* Kernel TOC address */
+	u64 stab_real;			/* Absolute address of segment table */
+	u64 stab_addr;			/* Virtual address of segment table */
+	void *emergency_sp;		/* pointer to emergency stack */
+	s16 hw_cpu_id;			/* Physical processor number */
+	u8 cpu_start;			/* At startup, processor spins until */
+					/* this becomes non-zero. */
+
+	/*
+	 * Now, starting in cacheline 2, the exception save areas
+	 */
+	/* used for most interrupts/exceptions */
+	u64 exgen[10] __attribute__((aligned(0x80)));
+	u64 exmc[10];		/* used for machine checks */
+	u64 exslb[10];		/* used for SLB/segment table misses
+ 				 * on the linear mapping */
+#ifdef CONFIG_PPC_64K_PAGES
+	pgd_t *pgdir;
+#endif /* CONFIG_PPC_64K_PAGES */
+
+	mm_context_t context;
+	u16 slb_cache[SLB_CACHE_ENTRIES];
+	u16 slb_cache_ptr;
+
+	/*
+	 * then miscellaneous read-write fields
+	 */
+	struct task_struct *__current;	/* Pointer to current */
+	u64 kstack;			/* Saved Kernel stack addr */
+	u64 stab_rr;			/* stab/slb round-robin counter */
+	u64 next_jiffy_update_tb;	/* TB value for next jiffy update */
+	u64 saved_r1;			/* r1 save for RTAS calls */
+	u64 saved_msr;			/* MSR saved here by enter_rtas */
+	u8 proc_enabled;		/* irq soft-enable flag */
+
+	/* not yet used */
+	u64 exdsi[8];		/* used for linear mapping hash table misses */
+
+	/*
+	 * iSeries structure which the hypervisor knows about -
+	 * this structure should not cross a page boundary.
+	 * The vpa_init/register_vpa call is now known to fail if the
+	 * lppaca structure crosses a page boundary.
+	 * The lppaca is also used on POWER5 pSeries boxes.
+	 * The lppaca is 640 bytes long, and cannot readily change
+	 * since the hypervisor knows its layout, so a 1kB
+	 * alignment will suffice to ensure that it doesn't
+	 * cross a page boundary.
+	 */
+	struct lppaca lppaca __attribute__((__aligned__(0x400)));
+#ifdef CONFIG_PPC_ISERIES
+	struct ItLpRegSave reg_save;
+#endif
+};
+
+extern struct paca_struct paca[];
+
+#endif /* _ASM_POWERPC_PACA_H */