[PATCH] powerpc: Move more ppc64 files with no ppc32 equivalent to powerpc

This patch moves a bunch more files from arch/ppc64 and
include/asm-ppc64 which have no equivalents in ppc32 code into
arch/powerpc and include/asm-powerpc.  The file affected are:
	hvcall.h
	proc_ppc64.c
	sysfs.c
	lparcfg.c
	rtas_pci.c

The only changes apart from the move and corresponding Makefile
changes are:
	- #ifndef/#define in includes updated to _ASM_POWERPC_ form
	- trailing whitespace removed
	- comments giving full paths removed

Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built
for 32-bit powermac (ARCH=powerpc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 173 insertions, 0 deletions

diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h
new file mode 100644
index 00000000000..d36da61dbc5
--- /dev/null
+++ b/include/asm-powerpc/hvcall.h
@@ -0,0 +1,173 @@
+#ifndef _ASM_POWERPC_HVCALL_H
+#define _ASM_POWERPC_HVCALL_H
+
+#define HVSC			.long 0x44000022
+
+#define H_Success	0
+#define H_Busy		1	/* Hardware busy -- retry later */
+#define H_Constrained	4	/* Resource request constrained to max allowed */
+#define H_LongBusyStartRange   9900  /* Start of long busy range */
+#define H_LongBusyOrder1msec   9900  /* Long busy, hint that 1msec is a good time to retry */
+#define H_LongBusyOrder10msec  9901  /* Long busy, hint that 10msec is a good time to retry */
+#define H_LongBusyOrder100msec 9902  /* Long busy, hint that 100msec is a good time to retry */
+#define H_LongBusyOrder1sec    9903  /* Long busy, hint that 1sec is a good time to retry */
+#define H_LongBusyOrder10sec   9904  /* Long busy, hint that 10sec is a good time to retry */
+#define H_LongBusyOrder100sec  9905  /* Long busy, hint that 100sec is a good time to retry */
+#define H_LongBusyEndRange     9905  /* End of long busy range */
+#define H_Hardware	-1	/* Hardware error */
+#define H_Function	-2	/* Function not supported */
+#define H_Privilege	-3	/* Caller not privileged */
+#define H_Parameter	-4	/* Parameter invalid, out-of-range or conflicting */
+#define H_Bad_Mode	-5	/* Illegal msr value */
+#define H_PTEG_Full	-6	/* PTEG is full */
+#define H_Not_Found	-7	/* PTE was not found" */
+#define H_Reserved_DABR	-8	/* DABR address is reserved by the hypervisor on this processor" */
+#define H_NoMem                 -9
+#define H_Authority            -10
+#define H_Permission           -11
+#define H_Dropped              -12
+#define H_SourceParm           -13
+#define H_DestParm             -14
+#define H_RemoteParm           -15
+#define H_Resource             -16
+
+/* Long Busy is a condition that can be returned by the firmware
+ * when a call cannot be completed now, but the identical call
+ * should be retried later.  This prevents calls blocking in the
+ * firmware for long periods of time. Annoyingly the firmware can return
+ * a range of return codes, hinting at how long we should wait before
+ * retrying.  If you don't care for the hint, the macro below is a good
+ * way to check for the long_busy return codes
+ */
+#define H_isLongBusy(x)  ((x >= H_LongBusyStartRange) && (x <= H_LongBusyEndRange))
+
+/* Flags */
+#define H_LARGE_PAGE		(1UL<<(63-16))
+#define H_EXACT			(1UL<<(63-24))	/* Use exact PTE or return H_PTEG_FULL */
+#define H_R_XLATE		(1UL<<(63-25))	/* include a valid logical page num in the pte if the valid bit is set */
+#define H_READ_4		(1UL<<(63-26))	/* Return 4 PTEs */
+#define H_AVPN			(1UL<<(63-32))	/* An avpn is provided as a sanity test */
+#define H_ANDCOND		(1UL<<(63-33))
+#define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
+#define H_ICACHE_SYNCHRONIZE	(1UL<<(63-41))	/* dcbst, icbi, etc (ignored for IO pages */
+#define H_ZERO_PAGE		(1UL<<(63-48))	/* zero the page before mapping (ignored for IO pages) */
+#define H_COPY_PAGE		(1UL<<(63-49))
+#define H_N			(1UL<<(63-61))
+#define H_PP1			(1UL<<(63-62))
+#define H_PP2			(1UL<<(63-63))
+
+/* DABRX flags */
+#define H_DABRX_HYPERVISOR	(1UL<<(63-61))
+#define H_DABRX_KERNEL		(1UL<<(63-62))
+#define H_DABRX_USER		(1UL<<(63-63))
+
+/* pSeries hypervisor opcodes */
+#define H_REMOVE		0x04
+#define H_ENTER			0x08
+#define H_READ			0x0c
+#define H_CLEAR_MOD		0x10
+#define H_CLEAR_REF		0x14
+#define H_PROTECT		0x18
+#define H_GET_TCE		0x1c
+#define H_PUT_TCE		0x20
+#define H_SET_SPRG0		0x24
+#define H_SET_DABR		0x28
+#define H_PAGE_INIT		0x2c
+#define H_SET_ASR		0x30
+#define H_ASR_ON		0x34
+#define H_ASR_OFF		0x38
+#define H_LOGICAL_CI_LOAD	0x3c
+#define H_LOGICAL_CI_STORE	0x40
+#define H_LOGICAL_CACHE_LOAD	0x44
+#define H_LOGICAL_CACHE_STORE	0x48
+#define H_LOGICAL_ICBI		0x4c
+#define H_LOGICAL_DCBF		0x50
+#define H_GET_TERM_CHAR		0x54
+#define H_PUT_TERM_CHAR		0x58
+#define H_REAL_TO_LOGICAL	0x5c
+#define H_HYPERVISOR_DATA	0x60
+#define H_EOI			0x64
+#define H_CPPR			0x68
+#define H_IPI			0x6c
+#define H_IPOLL			0x70
+#define H_XIRR			0x74
+#define H_PERFMON		0x7c
+#define H_MIGRATE_DMA		0x78
+#define H_REGISTER_VPA		0xDC
+#define H_CEDE		        0xE0
+#define H_CONFER		0xE4
+#define H_PROD		        0xE8
+#define H_GET_PPP		0xEC
+#define H_SET_PPP		0xF0
+#define H_PURR			0xF4
+#define H_PIC		        0xF8
+#define H_REG_CRQ		0xFC
+#define H_FREE_CRQ		0x100
+#define H_VIO_SIGNAL		0x104
+#define H_SEND_CRQ		0x108
+#define H_COPY_RDMA             0x110
+#define H_SET_XDABR		0x134
+#define H_STUFF_TCE		0x138
+#define H_PUT_TCE_INDIRECT	0x13C
+#define H_VTERM_PARTNER_INFO	0x150
+#define H_REGISTER_VTERM	0x154
+#define H_FREE_VTERM		0x158
+#define H_POLL_PENDING	        0x1D8
+
+#ifndef __ASSEMBLY__
+
+/* plpar_hcall() -- Generic call interface using above opcodes
+ *
+ * The actual call interface is a hypervisor call instruction with
+ * the opcode in R3 and input args in R4-R7.
+ * Status is returned in R3 with variable output values in R4-R11.
+ * Only H_PTE_READ with H_READ_4 uses R6-R11 so we ignore it for now
+ * and return only two out args which MUST ALWAYS BE PROVIDED.
+ */
+long plpar_hcall(unsigned long opcode,
+		 unsigned long arg1,
+		 unsigned long arg2,
+		 unsigned long arg3,
+		 unsigned long arg4,
+		 unsigned long *out1,
+		 unsigned long *out2,
+		 unsigned long *out3);
+
+/* Same as plpar_hcall but for those opcodes that return no values
+ * other than status.  Slightly more efficient.
+ */
+long plpar_hcall_norets(unsigned long opcode, ...);
+
+/*
+ * Special hcall interface for ibmveth support.
+ * Takes 8 input parms. Returns a rc and stores the
+ * R4 return value in *out1.
+ */
+long plpar_hcall_8arg_2ret(unsigned long opcode,
+			   unsigned long arg1,
+		  	   unsigned long arg2,
+			   unsigned long arg3,
+			   unsigned long arg4,
+			   unsigned long arg5,
+			   unsigned long arg6,
+			   unsigned long arg7,
+			   unsigned long arg8,
+			   unsigned long *out1);
+
+/* plpar_hcall_4out()
+ *
+ * same as plpar_hcall except with 4 output arguments.
+ *
+ */
+long plpar_hcall_4out(unsigned long opcode,
+		      unsigned long arg1,
+		      unsigned long arg2,
+		      unsigned long arg3,
+		      unsigned long arg4,
+		      unsigned long *out1,
+		      unsigned long *out2,
+		      unsigned long *out3,
+		      unsigned long *out4);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_POWERPC_HVCALL_H */