summaryrefslogtreecommitdiffstats
path: root/include/asm-powerpc
diff options
context:
space:
mode:
authorPaul Mackerras <paulus@samba.org>2005-10-20 20:53:39 +1000
committerPaul Mackerras <paulus@samba.org>2005-10-20 20:53:39 +1000
commitff065ddd96c233d27322de493fa023357939c888 (patch)
treeb60d8a362dea386d1cec91422fd18f92da244ffd /include/asm-powerpc
parent0dd194d02d2584c34e06ddd26c7a7896a5fa1974 (diff)
powerpc: Merge various powermac-related header files.
Except for smu.h, which moved from asm-ppc64 to asm-powerpc, all of these moved from asm-ppc to asm-powerpc. In each case the asm-ppc64 version (if there was one) was just a single line including the asm-ppc version. Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'include/asm-powerpc')
-rw-r--r--include/asm-powerpc/dbdma.h102
-rw-r--r--include/asm-powerpc/heathrow.h62
-rw-r--r--include/asm-powerpc/keylargo.h248
-rw-r--r--include/asm-powerpc/macio.h140
-rw-r--r--include/asm-powerpc/mediabay.h31
-rw-r--r--include/asm-powerpc/ohare.h48
-rw-r--r--include/asm-powerpc/pmac_feature.h380
-rw-r--r--include/asm-powerpc/pmac_low_i2c.h43
-rw-r--r--include/asm-powerpc/smu.h379
-rw-r--r--include/asm-powerpc/uninorth.h229
10 files changed, 1662 insertions, 0 deletions
diff --git a/include/asm-powerpc/dbdma.h b/include/asm-powerpc/dbdma.h
new file mode 100644
index 00000000000..8973565f95d
--- /dev/null
+++ b/include/asm-powerpc/dbdma.h
@@ -0,0 +1,102 @@
+/*
+ * Definitions for using the Apple Descriptor-Based DMA controller
+ * in Power Macintosh computers.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+#ifdef __KERNEL__
+#ifndef _ASM_DBDMA_H_
+#define _ASM_DBDMA_H_
+/*
+ * DBDMA control/status registers. All little-endian.
+ */
+struct dbdma_regs {
+ unsigned int control; /* lets you change bits in status */
+ unsigned int status; /* DMA and device status bits (see below) */
+ unsigned int cmdptr_hi; /* upper 32 bits of command address */
+ unsigned int cmdptr; /* (lower 32 bits of) command address (phys) */
+ unsigned int intr_sel; /* select interrupt condition bit */
+ unsigned int br_sel; /* select branch condition bit */
+ unsigned int wait_sel; /* select wait condition bit */
+ unsigned int xfer_mode;
+ unsigned int data2ptr_hi;
+ unsigned int data2ptr;
+ unsigned int res1;
+ unsigned int address_hi;
+ unsigned int br_addr_hi;
+ unsigned int res2[3];
+};
+
+/* Bits in control and status registers */
+#define RUN 0x8000
+#define PAUSE 0x4000
+#define FLUSH 0x2000
+#define WAKE 0x1000
+#define DEAD 0x0800
+#define ACTIVE 0x0400
+#define BT 0x0100
+#define DEVSTAT 0x00ff
+
+/*
+ * DBDMA command structure. These fields are all little-endian!
+ */
+struct dbdma_cmd {
+ unsigned short req_count; /* requested byte transfer count */
+ unsigned short command; /* command word (has bit-fields) */
+ unsigned int phy_addr; /* physical data address */
+ unsigned int cmd_dep; /* command-dependent field */
+ unsigned short res_count; /* residual count after completion */
+ unsigned short xfer_status; /* transfer status */
+};
+
+/* DBDMA command values in command field */
+#define OUTPUT_MORE 0 /* transfer memory data to stream */
+#define OUTPUT_LAST 0x1000 /* ditto followed by end marker */
+#define INPUT_MORE 0x2000 /* transfer stream data to memory */
+#define INPUT_LAST 0x3000 /* ditto, expect end marker */
+#define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */
+#define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */
+#define DBDMA_NOP 0x6000 /* do nothing */
+#define DBDMA_STOP 0x7000 /* suspend processing */
+
+/* Key values in command field */
+#define KEY_STREAM0 0 /* usual data stream */
+#define KEY_STREAM1 0x100 /* control/status stream */
+#define KEY_STREAM2 0x200 /* device-dependent stream */
+#define KEY_STREAM3 0x300 /* device-dependent stream */
+#define KEY_REGS 0x500 /* device register space */
+#define KEY_SYSTEM 0x600 /* system memory-mapped space */
+#define KEY_DEVICE 0x700 /* device memory-mapped space */
+
+/* Interrupt control values in command field */
+#define INTR_NEVER 0 /* don't interrupt */
+#define INTR_IFSET 0x10 /* intr if condition bit is 1 */
+#define INTR_IFCLR 0x20 /* intr if condition bit is 0 */
+#define INTR_ALWAYS 0x30 /* always interrupt */
+
+/* Branch control values in command field */
+#define BR_NEVER 0 /* don't branch */
+#define BR_IFSET 0x4 /* branch if condition bit is 1 */
+#define BR_IFCLR 0x8 /* branch if condition bit is 0 */
+#define BR_ALWAYS 0xc /* always branch */
+
+/* Wait control values in command field */
+#define WAIT_NEVER 0 /* don't wait */
+#define WAIT_IFSET 1 /* wait if condition bit is 1 */
+#define WAIT_IFCLR 2 /* wait if condition bit is 0 */
+#define WAIT_ALWAYS 3 /* always wait */
+
+/* Align an address for a DBDMA command structure */
+#define DBDMA_ALIGN(x) (((unsigned long)(x) + sizeof(struct dbdma_cmd) - 1) \
+ & -sizeof(struct dbdma_cmd))
+
+/* Useful macros */
+#define DBDMA_DO_STOP(regs) do { \
+ out_le32(&((regs)->control), (RUN|FLUSH)<<16); \
+ while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH)) \
+ ; \
+} while(0)
+
+#endif /* _ASM_DBDMA_H_ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/heathrow.h b/include/asm-powerpc/heathrow.h
new file mode 100644
index 00000000000..22ac179856b
--- /dev/null
+++ b/include/asm-powerpc/heathrow.h
@@ -0,0 +1,62 @@
+/*
+ * heathrow.h: definitions for using the "Heathrow" I/O controller chip.
+ *
+ * Grabbed from Open Firmware definitions on a PowerBook G3 Series
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ */
+
+/* Front light color on Yikes/B&W G3. 32 bits */
+#define HEATHROW_FRONT_LIGHT 0x32 /* (set to 0 or 0xffffffff) */
+
+/* Brightness/contrast (gossamer iMac ?). 8 bits */
+#define HEATHROW_BRIGHTNESS_CNTL 0x32
+#define HEATHROW_CONTRAST_CNTL 0x33
+
+/* offset from ohare base for feature control register */
+#define HEATHROW_MBCR 0x34 /* Media bay control */
+#define HEATHROW_FCR 0x38 /* Feature control */
+#define HEATHROW_AUX_CNTL_REG 0x3c /* Aux control */
+
+/*
+ * Bits in feature control register.
+ * Bits postfixed with a _N are in inverse logic
+ */
+#define HRW_SCC_TRANS_EN_N 0x00000001 /* Also controls modem power */
+#define HRW_BAY_POWER_N 0x00000002
+#define HRW_BAY_PCI_ENABLE 0x00000004
+#define HRW_BAY_IDE_ENABLE 0x00000008
+#define HRW_BAY_FLOPPY_ENABLE 0x00000010
+#define HRW_IDE0_ENABLE 0x00000020
+#define HRW_IDE0_RESET_N 0x00000040
+#define HRW_BAY_DEV_MASK 0x0000001c
+#define HRW_BAY_RESET_N 0x00000080
+#define HRW_IOBUS_ENABLE 0x00000100 /* Internal IDE ? */
+#define HRW_SCC_ENABLE 0x00000200
+#define HRW_MESH_ENABLE 0x00000400
+#define HRW_SWIM_ENABLE 0x00000800
+#define HRW_SOUND_POWER_N 0x00001000
+#define HRW_SOUND_CLK_ENABLE 0x00002000
+#define HRW_SCCA_IO 0x00004000
+#define HRW_SCCB_IO 0x00008000
+#define HRW_PORT_OR_DESK_VIA_N 0x00010000 /* This one is 0 on PowerBook */
+#define HRW_PWM_MON_ID_N 0x00020000 /* ??? (0) */
+#define HRW_HOOK_MB_CNT_N 0x00040000 /* ??? (0) */
+#define HRW_SWIM_CLONE_FLOPPY 0x00080000 /* ??? (0) */
+#define HRW_AUD_RUN22 0x00100000 /* ??? (1) */
+#define HRW_SCSI_LINK_MODE 0x00200000 /* Read ??? (1) */
+#define HRW_ARB_BYPASS 0x00400000 /* Disable internal PCI arbitrer */
+#define HRW_IDE1_RESET_N 0x00800000 /* Media bay */
+#define HRW_SLOW_SCC_PCLK 0x01000000 /* ??? (0) */
+#define HRW_RESET_SCC 0x02000000
+#define HRW_MFDC_CELL_ENABLE 0x04000000 /* ??? (0) */
+#define HRW_USE_MFDC 0x08000000 /* ??? (0) */
+#define HRW_BMAC_IO_ENABLE 0x60000000 /* two bits, not documented in OF */
+#define HRW_BMAC_RESET 0x80000000 /* not documented in OF */
+
+/* We OR those features at boot on desktop G3s */
+#define HRW_DEFAULTS (HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE)
+
+/* Looks like Heathrow has some sort of GPIOs as well... */
+#define HRW_GPIO_MODEM_RESET 0x6d
+
diff --git a/include/asm-powerpc/keylargo.h b/include/asm-powerpc/keylargo.h
new file mode 100644
index 00000000000..a669a3f0f5a
--- /dev/null
+++ b/include/asm-powerpc/keylargo.h
@@ -0,0 +1,248 @@
+/*
+ * keylargo.h: definitions for using the "KeyLargo" I/O controller chip.
+ *
+ */
+
+/* "Pangea" chipset has keylargo device-id 0x25 while core99
+ * has device-id 0x22. The rev. of the pangea one is 0, so we
+ * fake an artificial rev. in keylargo_rev by oring 0x100
+ */
+#define KL_PANGEA_REV 0x100
+
+/* offset from base for feature control registers */
+#define KEYLARGO_MBCR 0x34 /* KL Only, Media bay control/status */
+#define KEYLARGO_FCR0 0x38
+#define KEYLARGO_FCR1 0x3c
+#define KEYLARGO_FCR2 0x40
+#define KEYLARGO_FCR3 0x44
+#define KEYLARGO_FCR4 0x48
+#define KEYLARGO_FCR5 0x4c /* Pangea only */
+
+/* K2 aditional FCRs */
+#define K2_FCR6 0x34
+#define K2_FCR7 0x30
+#define K2_FCR8 0x2c
+#define K2_FCR9 0x28
+#define K2_FCR10 0x24
+
+/* GPIO registers */
+#define KEYLARGO_GPIO_LEVELS0 0x50
+#define KEYLARGO_GPIO_LEVELS1 0x54
+#define KEYLARGO_GPIO_EXTINT_0 0x58
+#define KEYLARGO_GPIO_EXTINT_CNT 18
+#define KEYLARGO_GPIO_0 0x6A
+#define KEYLARGO_GPIO_CNT 17
+#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE 0x80
+#define KEYLARGO_GPIO_OUTPUT_ENABLE 0x04
+#define KEYLARGO_GPIO_OUTOUT_DATA 0x01
+#define KEYLARGO_GPIO_INPUT_DATA 0x02
+
+/* K2 does only extint GPIOs and does 51 of them */
+#define K2_GPIO_EXTINT_0 0x58
+#define K2_GPIO_EXTINT_CNT 51
+
+/* Specific GPIO regs */
+
+#define KL_GPIO_MODEM_RESET (KEYLARGO_GPIO_0+0x03)
+#define KL_GPIO_MODEM_POWER (KEYLARGO_GPIO_0+0x02) /* Pangea */
+
+#define KL_GPIO_SOUND_POWER (KEYLARGO_GPIO_0+0x05)
+
+/* Hrm... this one is only to be used on Pismo. It seeem to also
+ * control the timebase enable on other machines. Still to be
+ * experimented... --BenH.
+ */
+#define KL_GPIO_FW_CABLE_POWER (KEYLARGO_GPIO_0+0x09)
+#define KL_GPIO_TB_ENABLE (KEYLARGO_GPIO_0+0x09)
+
+#define KL_GPIO_ETH_PHY_RESET (KEYLARGO_GPIO_0+0x10)
+
+#define KL_GPIO_EXTINT_CPU1 (KEYLARGO_GPIO_0+0x0a)
+#define KL_GPIO_EXTINT_CPU1_ASSERT 0x04
+#define KL_GPIO_EXTINT_CPU1_RELEASE 0x38
+
+#define KL_GPIO_RESET_CPU0 (KEYLARGO_GPIO_EXTINT_0+0x03)
+#define KL_GPIO_RESET_CPU1 (KEYLARGO_GPIO_EXTINT_0+0x04)
+#define KL_GPIO_RESET_CPU2 (KEYLARGO_GPIO_EXTINT_0+0x0f)
+#define KL_GPIO_RESET_CPU3 (KEYLARGO_GPIO_EXTINT_0+0x10)
+
+#define KL_GPIO_PMU_MESSAGE_IRQ (KEYLARGO_GPIO_EXTINT_0+0x09)
+#define KL_GPIO_PMU_MESSAGE_BIT KEYLARGO_GPIO_INPUT_DATA
+
+#define KL_GPIO_MEDIABAY_IRQ (KEYLARGO_GPIO_EXTINT_0+0x0e)
+
+#define KL_GPIO_AIRPORT_0 (KEYLARGO_GPIO_EXTINT_0+0x0a)
+#define KL_GPIO_AIRPORT_1 (KEYLARGO_GPIO_EXTINT_0+0x0d)
+#define KL_GPIO_AIRPORT_2 (KEYLARGO_GPIO_0+0x0d)
+#define KL_GPIO_AIRPORT_3 (KEYLARGO_GPIO_0+0x0e)
+#define KL_GPIO_AIRPORT_4 (KEYLARGO_GPIO_0+0x0f)
+
+/*
+ * Bits in feature control register. Those bits different for K2 are
+ * listed separately
+ */
+#define KL_MBCR_MB0_PCI_ENABLE 0x00000800 /* exist ? */
+#define KL_MBCR_MB0_IDE_ENABLE 0x00001000
+#define KL_MBCR_MB0_FLOPPY_ENABLE 0x00002000 /* exist ? */
+#define KL_MBCR_MB0_SOUND_ENABLE 0x00004000 /* hrm... */
+#define KL_MBCR_MB0_DEV_MASK 0x00007800
+#define KL_MBCR_MB0_DEV_POWER 0x00000400
+#define KL_MBCR_MB0_DEV_RESET 0x00000200
+#define KL_MBCR_MB0_ENABLE 0x00000100
+#define KL_MBCR_MB1_PCI_ENABLE 0x08000000 /* exist ? */
+#define KL_MBCR_MB1_IDE_ENABLE 0x10000000
+#define KL_MBCR_MB1_FLOPPY_ENABLE 0x20000000 /* exist ? */
+#define KL_MBCR_MB1_SOUND_ENABLE 0x40000000 /* hrm... */
+#define KL_MBCR_MB1_DEV_MASK 0x78000000
+#define KL_MBCR_MB1_DEV_POWER 0x04000000
+#define KL_MBCR_MB1_DEV_RESET 0x02000000
+#define KL_MBCR_MB1_ENABLE 0x01000000
+
+#define KL0_SCC_B_INTF_ENABLE 0x00000001 /* (KL Only) */
+#define KL0_SCC_A_INTF_ENABLE 0x00000002
+#define KL0_SCC_SLOWPCLK 0x00000004
+#define KL0_SCC_RESET 0x00000008
+#define KL0_SCCA_ENABLE 0x00000010
+#define KL0_SCCB_ENABLE 0x00000020
+#define KL0_SCC_CELL_ENABLE 0x00000040
+#define KL0_IRDA_HIGH_BAND 0x00000100 /* (KL Only) */
+#define KL0_IRDA_SOURCE2_SEL 0x00000200 /* (KL Only) */
+#define KL0_IRDA_SOURCE1_SEL 0x00000400 /* (KL Only) */
+#define KL0_PG_USB0_PMI_ENABLE 0x00000400 /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_RESET 0x00000800 /* (KL Only) */
+#define KL0_PG_USB0_REF_SUSPEND_SEL 0x00000800 /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_DEFAULT1 0x00001000 /* (KL Only) */
+#define KL0_PG_USB0_REF_SUSPEND 0x00001000 /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_DEFAULT0 0x00002000 /* (KL Only) */
+#define KL0_PG_USB0_PAD_SUSPEND 0x00002000 /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_FAST_CONNECT 0x00004000 /* (KL Only) */
+#define KL0_PG_USB1_PMI_ENABLE 0x00004000 /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_ENABLE 0x00008000 /* (KL Only) */
+#define KL0_PG_USB1_REF_SUSPEND_SEL 0x00008000 /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_CLK32_ENABLE 0x00010000 /* (KL Only) */
+#define KL0_PG_USB1_REF_SUSPEND 0x00010000 /* (Pangea/Intrepid Only) */
+#define KL0_IRDA_CLK19_ENABLE 0x00020000 /* (KL Only) */
+#define KL0_PG_USB1_PAD_SUSPEND 0x00020000 /* (Pangea/Intrepid Only) */
+#define KL0_USB0_PAD_SUSPEND0 0x00040000
+#define KL0_USB0_PAD_SUSPEND1 0x00080000
+#define KL0_USB0_CELL_ENABLE 0x00100000
+#define KL0_USB1_PAD_SUSPEND0 0x00400000
+#define KL0_USB1_PAD_SUSPEND1 0x00800000
+#define KL0_USB1_CELL_ENABLE 0x01000000
+#define KL0_USB_REF_SUSPEND 0x10000000 /* (KL Only) */
+
+#define KL0_SERIAL_ENABLE (KL0_SCC_B_INTF_ENABLE | \
+ KL0_SCC_SLOWPCLK | \
+ KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE)
+
+#define KL1_USB2_PMI_ENABLE 0x00000001 /* Intrepid only */
+#define KL1_AUDIO_SEL_22MCLK 0x00000002 /* KL/Pangea only */
+#define KL1_USB2_REF_SUSPEND_SEL 0x00000002 /* Intrepid only */
+#define KL1_USB2_REF_SUSPEND 0x00000004 /* Intrepid only */
+#define KL1_AUDIO_CLK_ENABLE_BIT 0x00000008 /* KL/Pangea only */
+#define KL1_USB2_PAD_SUSPEND_SEL 0x00000008 /* Intrepid only */
+#define KL1_USB2_PAD_SUSPEND0 0x00000010 /* Intrepid only */
+#define KL1_AUDIO_CLK_OUT_ENABLE 0x00000020 /* KL/Pangea only */
+#define KL1_USB2_PAD_SUSPEND1 0x00000020 /* Intrepid only */
+#define KL1_AUDIO_CELL_ENABLE 0x00000040 /* KL/Pangea only */
+#define KL1_USB2_CELL_ENABLE 0x00000040 /* Intrepid only */
+#define KL1_AUDIO_CHOOSE 0x00000080 /* KL/Pangea only */
+#define KL1_I2S0_CHOOSE 0x00000200 /* KL Only */
+#define KL1_I2S0_CELL_ENABLE 0x00000400
+#define KL1_I2S0_CLK_ENABLE_BIT 0x00001000
+#define KL1_I2S0_ENABLE 0x00002000
+#define KL1_I2S1_CELL_ENABLE 0x00020000
+#define KL1_I2S1_CLK_ENABLE_BIT 0x00080000
+#define KL1_I2S1_ENABLE 0x00100000
+#define KL1_EIDE0_ENABLE 0x00800000 /* KL/Intrepid Only */
+#define KL1_EIDE0_RESET_N 0x01000000 /* KL/Intrepid Only */
+#define KL1_EIDE1_ENABLE 0x04000000 /* KL Only */
+#define KL1_EIDE1_RESET_N 0x08000000 /* KL Only */
+#define KL1_UIDE_ENABLE 0x20000000 /* KL/Pangea Only */
+#define KL1_UIDE_RESET_N 0x40000000 /* KL/Pangea Only */
+
+#define KL2_IOBUS_ENABLE 0x00000002
+#define KL2_SLEEP_STATE_BIT 0x00000100 /* KL Only */
+#define KL2_PG_STOP_ALL_CLOCKS 0x00000100 /* Pangea Only */
+#define KL2_MPIC_ENABLE 0x00020000
+#define KL2_CARDSLOT_RESET 0x00040000 /* Pangea/Intrepid Only */
+#define KL2_ALT_DATA_OUT 0x02000000 /* KL Only ??? */
+#define KL2_MEM_IS_BIG 0x04000000
+#define KL2_CARDSEL_16 0x08000000
+
+#define KL3_SHUTDOWN_PLL_TOTAL 0x00000001 /* KL/Pangea only */
+#define KL3_SHUTDOWN_PLLKW6 0x00000002 /* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL3 0x00000002 /* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW4 0x00000004 /* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL2 0x00000004 /* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW35 0x00000008 /* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL1 0x00000008 /* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW12 0x00000010 /* KL Only */
+#define KL3_IT_ENABLE_PLL3_SHUTDOWN 0x00000010 /* Intrepid only */
+#define KL3_PLL_RESET 0x00000020 /* KL/Pangea only */
+#define KL3_IT_ENABLE_PLL2_SHUTDOWN 0x00000020 /* Intrepid only */
+#define KL3_IT_ENABLE_PLL1_SHUTDOWN 0x00000010 /* Intrepid only */
+#define KL3_SHUTDOWN_PLL2X 0x00000080 /* KL Only */
+#define KL3_CLK66_ENABLE 0x00000100 /* KL Only */
+#define KL3_CLK49_ENABLE 0x00000200
+#define KL3_CLK45_ENABLE 0x00000400
+#define KL3_CLK31_ENABLE 0x00000800 /* KL/Pangea only */
+#define KL3_TIMER_CLK18_ENABLE 0x00001000
+#define KL3_I2S1_CLK18_ENABLE 0x00002000
+#define KL3_I2S0_CLK18_ENABLE 0x00004000
+#define KL3_VIA_CLK16_ENABLE 0x00008000 /* KL/Pangea only */
+#define KL3_IT_VIA_CLK32_ENABLE 0x00008000 /* Intrepid only */
+#define KL3_STOPPING33_ENABLED 0x00080000 /* KL Only */
+#define KL3_PG_PLL_ENABLE_TEST 0x00080000 /* Pangea Only */
+
+/* Intrepid USB bus 2, port 0,1 */
+#define KL3_IT_PORT_WAKEUP_ENABLE(p) (0x00080000 << ((p)<<3))
+#define KL3_IT_PORT_RESUME_WAKE_EN(p) (0x00040000 << ((p)<<3))
+#define KL3_IT_PORT_CONNECT_WAKE_EN(p) (0x00020000 << ((p)<<3))
+#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p) (0x00010000 << ((p)<<3))
+#define KL3_IT_PORT_RESUME_STAT(p) (0x00300000 << ((p)<<3))
+#define KL3_IT_PORT_CONNECT_STAT(p) (0x00200000 << ((p)<<3))
+#define KL3_IT_PORT_DISCONNECT_STAT(p) (0x00100000 << ((p)<<3))
+
+/* Port 0,1 : bus 0, port 2,3 : bus 1 */
+#define KL4_PORT_WAKEUP_ENABLE(p) (0x00000008 << ((p)<<3))
+#define KL4_PORT_RESUME_WAKE_EN(p) (0x00000004 << ((p)<<3))
+#define KL4_PORT_CONNECT_WAKE_EN(p) (0x00000002 << ((p)<<3))
+#define KL4_PORT_DISCONNECT_WAKE_EN(p) (0x00000001 << ((p)<<3))
+#define KL4_PORT_RESUME_STAT(p) (0x00000040 << ((p)<<3))
+#define KL4_PORT_CONNECT_STAT(p) (0x00000020 << ((p)<<3))
+#define KL4_PORT_DISCONNECT_STAT(p) (0x00000010 << ((p)<<3))
+
+/* Pangea and Intrepid only */
+#define KL5_VIA_USE_CLK31 0000000001 /* Pangea Only */
+#define KL5_SCC_USE_CLK31 0x00000002 /* Pangea Only */
+#define KL5_PWM_CLK32_EN 0x00000004
+#define KL5_CLK3_68_EN 0x00000010
+#define KL5_CLK32_EN 0x00000020
+
+
+/* K2 definitions */
+#define K2_FCR0_USB0_SWRESET 0x00200000
+#define K2_FCR0_USB1_SWRESET 0x02000000
+#define K2_FCR0_RING_PME_DISABLE 0x08000000
+
+#define K2_FCR1_PCI1_BUS_RESET_N 0x00000010
+#define K2_FCR1_PCI1_SLEEP_RESET_EN 0x00000020
+#define K2_FCR1_I2S0_CELL_ENABLE 0x00000400
+#define K2_FCR1_I2S0_RESET 0x00000800
+#define K2_FCR1_I2S0_CLK_ENABLE_BIT 0x00001000
+#define K2_FCR1_I2S0_ENABLE 0x00002000
+
+#define K2_FCR1_PCI1_CLK_ENABLE 0x00004000
+#define K2_FCR1_FW_CLK_ENABLE 0x00008000
+#define K2_FCR1_FW_RESET_N 0x00010000
+#define K2_FCR1_GMAC_CLK_ENABLE 0x00400000
+#define K2_FCR1_GMAC_POWER_DOWN 0x00800000
+#define K2_FCR1_GMAC_RESET_N 0x01000000
+#define K2_FCR1_SATA_CLK_ENABLE 0x02000000
+#define K2_FCR1_SATA_POWER_DOWN 0x04000000
+#define K2_FCR1_SATA_RESET_N 0x08000000
+#define K2_FCR1_UATA_CLK_ENABLE 0x10000000
+#define K2_FCR1_UATA_RESET_N 0x40000000
+#define K2_FCR1_UATA_CHOOSE_CLK66 0x80000000
+
diff --git a/include/asm-powerpc/macio.h b/include/asm-powerpc/macio.h
new file mode 100644
index 00000000000..b553dd4b139
--- /dev/null
+++ b/include/asm-powerpc/macio.h
@@ -0,0 +1,140 @@
+#ifndef __MACIO_ASIC_H__
+#define __MACIO_ASIC_H__
+
+#include <asm/of_device.h>
+
+extern struct bus_type macio_bus_type;
+
+/* MacIO device driver is defined later */
+struct macio_driver;
+struct macio_chip;
+
+#define MACIO_DEV_COUNT_RESOURCES 8
+#define MACIO_DEV_COUNT_IRQS 8
+
+/*
+ * the macio_bus structure is used to describe a "virtual" bus
+ * within a MacIO ASIC. It's typically provided by a macio_pci_asic
+ * PCI device, but could be provided differently as well (nubus
+ * machines using a fake OF tree).
+ *
+ * The pdev field can be NULL on non-PCI machines
+ */
+struct macio_bus
+{
+ struct macio_chip *chip; /* macio_chip (private use) */
+ int index; /* macio chip index in system */
+#ifdef CONFIG_PCI
+ struct pci_dev *pdev; /* PCI device hosting this bus */
+#endif
+};
+
+/*
+ * the macio_dev structure is used to describe a device
+ * within an Apple MacIO ASIC.
+ */
+struct macio_dev
+{
+ struct macio_bus *bus; /* macio bus this device is on */
+ struct macio_dev *media_bay; /* Device is part of a media bay */
+ struct of_device ofdev;
+ int n_resources;
+ struct resource resource[MACIO_DEV_COUNT_RESOURCES];
+ int n_interrupts;
+ struct resource interrupt[MACIO_DEV_COUNT_IRQS];
+};
+#define to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev)
+#define of_to_macio_device(d) container_of(d, struct macio_dev, ofdev)
+
+extern struct macio_dev *macio_dev_get(struct macio_dev *dev);
+extern void macio_dev_put(struct macio_dev *dev);
+
+/*
+ * Accessors to resources & interrupts and other device
+ * fields
+ */
+
+static inline int macio_resource_count(struct macio_dev *dev)
+{
+ return dev->n_resources;
+}
+
+static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no)
+{
+ return dev->resource[resource_no].start;
+}
+
+static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no)
+{
+ return dev->resource[resource_no].end;
+}
+
+static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no)
+{
+ struct resource *res = &dev->resource[resource_no];
+ if (res->start == 0 || res->end == 0 || res->end < res->start)
+ return 0;
+ return res->end - res->start + 1;
+}
+
+extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name);
+extern void macio_release_resource(struct macio_dev *dev, int resource_no);
+extern int macio_request_resources(struct macio_dev *dev, const char *name);
+extern void macio_release_resources(struct macio_dev *dev);
+
+static inline int macio_irq_count(struct macio_dev *dev)
+{
+ return dev->n_interrupts;
+}
+
+static inline int macio_irq(struct macio_dev *dev, int irq_no)
+{
+ return dev->interrupt[irq_no].start;
+}
+
+static inline void macio_set_drvdata(struct macio_dev *dev, void *data)
+{
+ dev_set_drvdata(&dev->ofdev.dev, data);
+}
+
+static inline void* macio_get_drvdata(struct macio_dev *dev)
+{
+ return dev_get_drvdata(&dev->ofdev.dev);
+}
+
+static inline struct device_node *macio_get_of_node(struct macio_dev *mdev)
+{
+ return mdev->ofdev.node;
+}
+
+#ifdef CONFIG_PCI
+static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev)
+{
+ return mdev->bus->pdev;
+}
+#endif
+
+/*
+ * A driver for a mac-io chip based device
+ */
+struct macio_driver
+{
+ char *name;
+ struct of_device_id *match_table;
+ struct module *owner;
+
+ int (*probe)(struct macio_dev* dev, const struct of_device_id *match);
+ int (*remove)(struct macio_dev* dev);
+
+ int (*suspend)(struct macio_dev* dev, pm_message_t state);
+ int (*resume)(struct macio_dev* dev);
+ int (*shutdown)(struct macio_dev* dev);
+
+ struct device_driver driver;
+};
+#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver)
+
+extern int macio_register_driver(struct macio_driver *);
+extern void macio_unregister_driver(struct macio_driver *);
+
+#endif /* __MACIO_ASIC_H__ */
diff --git a/include/asm-powerpc/mediabay.h b/include/asm-powerpc/mediabay.h
new file mode 100644
index 00000000000..9daa3252d7b
--- /dev/null
+++ b/include/asm-powerpc/mediabay.h
@@ -0,0 +1,31 @@
+/*
+ * mediabay.h: definitions for using the media bay
+ * on PowerBook 3400 and similar computers.
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ */
+#ifndef _PPC_MEDIABAY_H
+#define _PPC_MEDIABAY_H
+
+#ifdef __KERNEL__
+
+#define MB_FD 0 /* media bay contains floppy drive (automatic eject ?) */
+#define MB_FD1 1 /* media bay contains floppy drive (manual eject ?) */
+#define MB_SOUND 2 /* sound device ? */
+#define MB_CD 3 /* media bay contains ATA drive such as CD or ZIP */
+#define MB_PCI 5 /* media bay contains a PCI device */
+#define MB_POWER 6 /* media bay contains a Power device (???) */
+#define MB_NO 7 /* media bay contains nothing */
+
+int check_media_bay(struct device_node *which_bay, int what);
+int check_media_bay_by_base(unsigned long base, int what);
+
+/* Number of bays in the machine or 0 */
+extern int media_bay_count;
+
+/* called by pmac-ide.c to register IDE controller for media bay */
+extern int media_bay_set_ide_infos(struct device_node* which_bay,
+ unsigned long base, int irq, int index);
+
+#endif /* __KERNEL__ */
+#endif /* _PPC_MEDIABAY_H */
diff --git a/include/asm-powerpc/ohare.h b/include/asm-powerpc/ohare.h
new file mode 100644
index 00000000000..023b5977223
--- /dev/null
+++ b/include/asm-powerpc/ohare.h
@@ -0,0 +1,48 @@
+/*
+ * ohare.h: definitions for using the "O'Hare" I/O controller chip.
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ *
+ * BenH: Changed to match those of heathrow (but not all of them). Please
+ * check if I didn't break anything (especially the media bay).
+ */
+
+/* offset from ohare base for feature control register */
+#define OHARE_MBCR 0x34
+#define OHARE_FCR 0x38
+
+/*
+ * Bits in feature control register.
+ * These were mostly derived by experiment on a powerbook 3400
+ * and may differ for other machines.
+ */
+#define OH_SCC_RESET 1
+#define OH_BAY_POWER_N 2 /* a guess */
+#define OH_BAY_PCI_ENABLE 4 /* a guess */
+#define OH_BAY_IDE_ENABLE 8
+#define OH_BAY_FLOPPY_ENABLE 0x10
+#define OH_IDE0_ENABLE 0x20
+#define OH_IDE0_RESET_N 0x40 /* a guess */
+#define OH_BAY_DEV_MASK 0x1c
+#define OH_BAY_RESET_N 0x80
+#define OH_IOBUS_ENABLE 0x100 /* IOBUS seems to be IDE */
+#define OH_SCC_ENABLE 0x200
+#define OH_MESH_ENABLE 0x400
+#define OH_FLOPPY_ENABLE 0x800
+#define OH_SCCA_IO 0x4000
+#define OH_SCCB_IO 0x8000
+#define OH_VIA_ENABLE 0x10000 /* Is apparently wrong, to be verified */
+#define OH_IDE1_RESET_N 0x800000
+
+/*
+ * Bits to set in the feature control register on PowerBooks.
+ */
+#define PBOOK_FEATURES (OH_IDE_ENABLE | OH_SCC_ENABLE | \
+ OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO)
+
+/*
+ * A magic value to put into the feature control register of the
+ * "ohare" I/O controller on Starmaxes to enable the IDE CD interface.
+ * Contributed by Harry Eaton.
+ */
+#define STARMAX_FEATURES 0xbeff7a
diff --git a/include/asm-powerpc/pmac_feature.h b/include/asm-powerpc/pmac_feature.h
new file mode 100644
index 00000000000..e9683bcff19
--- /dev/null
+++ b/include/asm-powerpc/pmac_feature.h
@@ -0,0 +1,380 @@
+/*
+ * Definition of platform feature hooks for PowerMacs
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Paul Mackerras &
+ * Ben. Herrenschmidt.
+ *
+ *
+ * Note: I removed media-bay details from the feature stuff, I believe it's
+ * not worth it, the media-bay driver can directly use the mac-io
+ * ASIC registers.
+ *
+ * Implementation note: Currently, none of these functions will block.
+ * However, they may internally protect themselves with a spinlock
+ * for way too long. Be prepared for at least some of these to block
+ * in the future.
+ *
+ * Unless specifically defined, the result code is assumed to be an
+ * error when negative, 0 is the default success result. Some functions
+ * may return additional positive result values.
+ *
+ * To keep implementation simple, all feature calls are assumed to have
+ * the prototype parameters (struct device_node* node, int value).
+ * When either is not used, pass 0.
+ */
+
+#ifdef __KERNEL__
+#ifndef __PPC_ASM_PMAC_FEATURE_H
+#define __PPC_ASM_PMAC_FEATURE_H
+
+#include <asm/macio.h>
+#include <asm/machdep.h>
+
+/*
+ * Known Mac motherboard models
+ *
+ * Please, report any error here to benh@kernel.crashing.org, thanks !
+ *
+ * Note that I don't fully maintain this list for Core99 & MacRISC2
+ * and I'm considering removing all NewWorld entries from it and
+ * entirely rely on the model string.
+ */
+
+/* PowerSurge are the first generation of PCI Pmacs. This include
+ * all of the Grand-Central based machines. We currently don't
+ * differenciate most of them.
+ */
+#define PMAC_TYPE_PSURGE 0x10 /* PowerSurge */
+#define PMAC_TYPE_ANS 0x11 /* Apple Network Server */
+
+/* Here is the infamous serie of OHare based machines
+ */
+#define PMAC_TYPE_COMET 0x20 /* Beleived to be PowerBook 2400 */
+#define PMAC_TYPE_HOOPER 0x21 /* Beleived to be PowerBook 3400 */
+#define PMAC_TYPE_KANGA 0x22 /* PowerBook 3500 (first G3) */
+#define PMAC_TYPE_ALCHEMY 0x23 /* Alchemy motherboard base */
+#define PMAC_TYPE_GAZELLE 0x24 /* Spartacus, some 5xxx/6xxx */
+#define PMAC_TYPE_UNKNOWN_OHARE 0x2f /* Unknown, but OHare based */
+
+/* Here are the Heathrow based machines
+ * FIXME: Differenciate wallstreet,mainstreet,wallstreetII
+ */
+#define PMAC_TYPE_GOSSAMER 0x30 /* Gossamer motherboard */
+#define PMAC_TYPE_SILK 0x31 /* Desktop PowerMac G3 */
+#define PMAC_TYPE_WALLSTREET 0x32 /* Wallstreet/Mainstreet PowerBook*/
+#define PMAC_TYPE_UNKNOWN_HEATHROW 0x3f /* Unknown but heathrow based */
+
+/* Here are newworld machines based on Paddington (heathrow derivative)
+ */
+#define PMAC_TYPE_101_PBOOK 0x40 /* 101 PowerBook (aka Lombard) */
+#define PMAC_TYPE_ORIG_IMAC 0x41 /* First generation iMac */
+#define PMAC_TYPE_YOSEMITE 0x42 /* B&W G3 */
+#define PMAC_TYPE_YIKES 0x43 /* Yikes G4 (PCI graphics) */
+#define PMAC_TYPE_UNKNOWN_PADDINGTON 0x4f /* Unknown but paddington based */
+
+/* Core99 machines based on UniNorth 1.0 and 1.5
+ *
+ * Note: A single entry here may cover several actual models according
+ * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most
+ * FireWire based iMacs, etc...). Those machines are too similar to be
+ * distinguished here, when they need to be differencied, use the
+ * device-tree "model" or "compatible" property.
+ */
+#define PMAC_TYPE_ORIG_IBOOK 0x40 /* First iBook model (no firewire) */
+#define PMAC_TYPE_SAWTOOTH 0x41 /* Desktop G4s */
+#define PMAC_TYPE_FW_IMAC 0x42 /* FireWire iMacs (except Pangea based) */
+#define PMAC_TYPE_FW_IBOOK 0x43 /* FireWire iBooks (except iBook2) */
+#define PMAC_TYPE_CUBE 0x44 /* Cube PowerMac */
+#define PMAC_TYPE_QUICKSILVER 0x45 /* QuickSilver G4s */
+#define PMAC_TYPE_PISMO 0x46 /* Pismo PowerBook */
+#define PMAC_TYPE_TITANIUM 0x47 /* Titanium PowerBook */
+#define PMAC_TYPE_TITANIUM2 0x48 /* Titanium II PowerBook (no L3, M6) */
+#define PMAC_TYPE_TITANIUM3 0x49 /* Titanium III PowerBook (with L3 & M7) */
+#define PMAC_TYPE_TITANIUM4 0x50 /* Titanium IV PowerBook (with L3 & M9) */
+#define PMAC_TYPE_EMAC 0x50 /* eMac */
+#define PMAC_TYPE_UNKNOWN_CORE99 0x5f
+
+/* MacRisc2 with UniNorth 2.0 */
+#define PMAC_TYPE_RACKMAC 0x80 /* XServe */
+#define PMAC_TYPE_WINDTUNNEL 0x81
+
+/* MacRISC2 machines based on the Pangea chipset
+ */
+#define PMAC_TYPE_PANGEA_IMAC 0x100 /* Flower Power iMac */
+#define PMAC_TYPE_IBOOK2 0x101 /* iBook2 (polycarbonate) */
+#define PMAC_TYPE_FLAT_PANEL_IMAC 0x102 /* Flat panel iMac */
+#define PMAC_TYPE_UNKNOWN_PANGEA 0x10f
+
+/* MacRISC2 machines based on the Intrepid chipset
+ */
+#define PMAC_TYPE_UNKNOWN_INTREPID 0x11f /* Generic */
+
+/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore,
+ * but rather machine families
+ */
+#define PMAC_TYPE_POWERMAC_G5 0x150 /* U3 & U3H based */
+#define PMAC_TYPE_POWERMAC_G5_U3L 0x151 /* U3L based desktop */
+#define PMAC_TYPE_IMAC_G5 0x152 /* iMac G5 */
+#define PMAC_TYPE_XSERVE_G5 0x153 /* Xserve G5 */
+#define PMAC_TYPE_UNKNOWN_K2 0x19f /* Any other K2 based */
+
+/*
+ * Motherboard flags
+ */
+
+#define PMAC_MB_CAN_SLEEP 0x00000001
+#define PMAC_MB_HAS_FW_POWER 0x00000002
+#define PMAC_MB_OLD_CORE99 0x00000004
+#define PMAC_MB_MOBILE 0x00000008
+#define PMAC_MB_MAY_SLEEP 0x00000010
+
+/*
+ * Feature calls supported on pmac
+ *
+ */
+
+/*
+ * Use this inline wrapper
+ */
+struct device_node;
+
+static inline long pmac_call_feature(int selector, struct device_node* node,
+ long param, long value)
+{
+ if (!ppc_md.feature_call)
+ return -ENODEV;
+ return ppc_md.feature_call(selector, node, param, value);
+}
+
+/* PMAC_FTR_SERIAL_ENABLE (struct device_node* node, int param, int value)
+ * enable/disable an SCC side. Pass the node corresponding to the
+ * channel side as a parameter.
+ * param is the type of port
+ * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled
+ * for use by xmon.
+ */
+#define PMAC_FTR_SCC_ENABLE PMAC_FTR_DEF(0)
+ #define PMAC_SCC_ASYNC 0
+ #define PMAC_SCC_IRDA 1
+ #define PMAC_SCC_I2S1 2
+ #define PMAC_SCC_FLAG_XMON 0x00001000
+
+/* PMAC_FTR_MODEM_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable the internal modem.
+ */
+#define PMAC_FTR_MODEM_ENABLE PMAC_FTR_DEF(1)
+
+/* PMAC_FTR_SWIM3_ENABLE (struct device_node* node, 0,int value)
+ * enable/disable the swim3 (floppy) cell of a mac-io ASIC
+ */
+#define PMAC_FTR_SWIM3_ENABLE PMAC_FTR_DEF(2)
+
+/* PMAC_FTR_MESH_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable the mesh (scsi) cell of a mac-io ASIC
+ */
+#define PMAC_FTR_MESH_ENABLE PMAC_FTR_DEF(3)
+
+/* PMAC_FTR_IDE_ENABLE (struct device_node* node, int busID, int value)
+ * enable/disable an IDE port of a mac-io ASIC
+ * pass the busID parameter
+ */
+#define PMAC_FTR_IDE_ENABLE PMAC_FTR_DEF(4)
+
+/* PMAC_FTR_IDE_RESET (struct device_node* node, int busID, int value)
+ * assert(1)/release(0) an IDE reset line (mac-io IDE only)
+ */
+#define PMAC_FTR_IDE_RESET PMAC_FTR_DEF(5)
+
+/* PMAC_FTR_BMAC_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive
+ * it's reset line
+ */
+#define PMAC_FTR_BMAC_ENABLE PMAC_FTR_DEF(6)
+
+/* PMAC_FTR_GMAC_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This
+ * control the cell's clock.
+ */
+#define PMAC_FTR_GMAC_ENABLE PMAC_FTR_DEF(7)
+
+/* PMAC_FTR_GMAC_PHY_RESET (struct device_node* node, 0, 0)
+ * Perform a HW reset of the PHY connected to a gmac controller.
+ * Pass the gmac device node, not the PHY node.
+ */
+#define PMAC_FTR_GMAC_PHY_RESET PMAC_FTR_DEF(8)
+
+/* PMAC_FTR_SOUND_CHIP_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable the sound chip, whatever it is and provided it can
+ * acually be controlled
+ */
+#define PMAC_FTR_SOUND_CHIP_ENABLE PMAC_FTR_DEF(9)
+
+/* -- add various tweaks related to sound routing -- */
+
+/* PMAC_FTR_AIRPORT_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable the airport card
+ */
+#define PMAC_FTR_AIRPORT_ENABLE PMAC_FTR_DEF(10)
+
+/* PMAC_FTR_RESET_CPU (NULL, int cpu_nr, 0)
+ * toggle the reset line of a CPU on an uninorth-based SMP machine
+ */
+#define PMAC_FTR_RESET_CPU PMAC_FTR_DEF(11)
+
+/* PMAC_FTR_USB_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable an USB cell, along with the power of the USB "pad"
+ * on keylargo based machines
+ */
+#define PMAC_FTR_USB_ENABLE PMAC_FTR_DEF(12)
+
+/* PMAC_FTR_1394_ENABLE (struct device_node* node, 0, int value)
+ * enable/disable the firewire cell of an uninorth ASIC.
+ */
+#define PMAC_FTR_1394_ENABLE PMAC_FTR_DEF(13)
+
+/* PMAC_FTR_1394_CABLE_POWER (struct device_node* node, 0, int value)
+ * enable/disable the firewire cable power supply of the uninorth
+ * firewire cell
+ */
+#define PMAC_FTR_1394_CABLE_POWER PMAC_FTR_DEF(14)
+
+/* PMAC_FTR_SLEEP_STATE (struct device_node* node, 0, int value)
+ * set the sleep state of the motherboard.
+ *
+ * Pass -1 as value to query for sleep capability
+ * Pass 1 to set IOs to sleep
+ * Pass 0 to set IOs to wake
+ */
+#define PMAC_FTR_SLEEP_STATE PMAC_FTR_DEF(15)
+
+/* PMAC_FTR_GET_MB_INFO (NULL, selector, 0)
+ *
+ * returns some motherboard infos.
+ * selector: 0 - model id
+ * 1 - model flags (capabilities)
+ * 2 - model name (cast to const char *)
+ */
+#define PMAC_FTR_GET_MB_INFO PMAC_FTR_DEF(16)
+#define PMAC_MB_INFO_MODEL 0
+#define PMAC_MB_INFO_FLAGS 1
+#define PMAC_MB_INFO_NAME 2
+
+/* PMAC_FTR_READ_GPIO (NULL, int index, 0)
+ *
+ * read a GPIO from a mac-io controller of type KeyLargo or Pangea.
+ * the value returned is a byte (positive), or a negative error code
+ */
+#define PMAC_FTR_READ_GPIO PMAC_FTR_DEF(17)
+
+/* PMAC_FTR_WRITE_GPIO (NULL, int index, int value)
+ *
+ * write a GPIO of a mac-io controller of type KeyLargo or Pangea.
+ */
+#define PMAC_FTR_WRITE_GPIO PMAC_FTR_DEF(18)
+
+/* PMAC_FTR_ENABLE_MPIC
+ *
+ * Enable the MPIC cell
+ */
+#define PMAC_FTR_ENABLE_MPIC PMAC_FTR_DEF(19)
+
+/* PMAC_FTR_AACK_DELAY_ENABLE (NULL, int enable, 0)
+ *
+ * Enable/disable the AACK delay on the northbridge for systems using DFS
+ */
+#define PMAC_FTR_AACK_DELAY_ENABLE PMAC_FTR_DEF(20)
+
+/* PMAC_FTR_DEVICE_CAN_WAKE
+ *
+ * Used by video drivers to inform system that they can actually perform
+ * wakeup from sleep
+ */
+#define PMAC_FTR_DEVICE_CAN_WAKE PMAC_FTR_DEF(22)
+
+
+/* Don't use those directly, they are for the sake of pmac_setup.c */
+extern long pmac_do_feature_call(unsigned int selector, ...);
+extern void pmac_feature_init(void);
+
+/* Video suspend tweak */
+extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data);
+extern void pmac_call_early_video_resume(void);
+
+#define PMAC_FTR_DEF(x) ((_MACH_Pmac << 16) | (x))
+
+/* The AGP driver registers itself here */
+extern void pmac_register_agp_pm(struct pci_dev *bridge,
+ int (*suspend)(struct pci_dev *bridge),
+ int (*resume)(struct pci_dev *bridge));
+
+/* Those are meant to be used by video drivers to deal with AGP
+ * suspend resume properly
+ */
+extern void pmac_suspend_agp_for_card(struct pci_dev *dev);
+extern void pmac_resume_agp_for_card(struct pci_dev *dev);
+
+/* Used by the via-pmu driver for suspend/resume
+ */
+extern void pmac_tweak_clock_spreading(int enable);
+
+/*
+ * The part below is for use by macio_asic.c only, do not rely
+ * on the data structures or constants below in a normal driver
+ *
+ */
+
+#define MAX_MACIO_CHIPS 2
+
+enum {
+ macio_unknown = 0,
+ macio_grand_central,
+ macio_ohare,
+ macio_ohareII,
+ macio_heathrow,
+ macio_gatwick,
+ macio_paddington,
+ macio_keylargo,
+ macio_pangea,
+ macio_intrepid,
+ macio_keylargo2,
+};
+
+struct macio_chip
+{
+ struct device_node *of_node;
+ int type;
+ const char *name;
+ int rev;
+ volatile u32 __iomem *base;
+ unsigned long flags;
+
+ /* For use by macio_asic PCI driver */
+ struct macio_bus lbus;
+};
+
+extern struct macio_chip macio_chips[MAX_MACIO_CHIPS];
+
+#define MACIO_FLAG_SCCA_ON 0x00000001
+#define MACIO_FLAG_SCCB_ON 0x00000002
+#define MACIO_FLAG_SCC_LOCKED 0x00000004
+#define MACIO_FLAG_AIRPORT_ON 0x00000010
+#define MACIO_FLAG_FW_SUPPORTED 0x00000020
+
+extern struct macio_chip* macio_find(struct device_node* child, int type);
+
+#define MACIO_FCR32(macio, r) ((macio)->base + ((r) >> 2))
+#define MACIO_FCR8(macio, r) (((volatile u8 __iomem *)((macio)->base)) + (r))
+
+#define MACIO_IN32(r) (in_le32(MACIO_FCR32(macio,r)))
+#define MACIO_OUT32(r,v) (out_le32(MACIO_FCR32(macio,r), (v)))
+#define MACIO_BIS(r,v) (MACIO_OUT32((r), MACIO_IN32(r) | (v)))
+#define MACIO_BIC(r,v) (MACIO_OUT32((r), MACIO_IN32(r) & ~(v)))
+#define MACIO_IN8(r) (in_8(MACIO_FCR8(macio,r)))
+#define MACIO_OUT8(r,v) (out_8(MACIO_FCR8(macio,r), (v)))
+
+#endif /* __PPC_ASM_PMAC_FEATURE_H */
+#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/pmac_low_i2c.h b/include/asm-powerpc/pmac_low_i2c.h
new file mode 100644
index 00000000000..809a5963d5e
--- /dev/null
+++ b/include/asm-powerpc/pmac_low_i2c.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-ppc/pmac_low_i2c.h
+ *
+ * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef __PMAC_LOW_I2C_H__
+#define __PMAC_LOW_I2C_H__
+
+/* i2c mode (based on the platform functions format) */
+enum {
+ pmac_low_i2c_mode_dumb = 1,
+ pmac_low_i2c_mode_std = 2,
+ pmac_low_i2c_mode_stdsub = 3,
+ pmac_low_i2c_mode_combined = 4,
+};
+
+/* RW bit in address */
+enum {
+ pmac_low_i2c_read = 0x01,
+ pmac_low_i2c_write = 0x00
+};
+
+/* Init, called early during boot */
+extern void pmac_init_low_i2c(void);
+
+/* Locking functions exposed to i2c-keywest */
+int pmac_low_i2c_lock(struct device_node *np);
+int pmac_low_i2c_unlock(struct device_node *np);
+
+/* Access functions for platform code */
+int pmac_low_i2c_open(struct device_node *np, int channel);
+int pmac_low_i2c_close(struct device_node *np);
+int pmac_low_i2c_setmode(struct device_node *np, int mode);
+int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len);
+
+
+#endif /* __PMAC_LOW_I2C_H__ */
diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h
new file mode 100644
index 00000000000..dee8eefe47b
--- /dev/null
+++ b/include/asm-powerpc/smu.h
@@ -0,0 +1,379 @@
+#ifndef _SMU_H
+#define _SMU_H
+
+/*
+ * Definitions for talking to the SMU chip in newer G5 PowerMacs
+ */
+
+#include <linux/config.h>
+#include <linux/list.h>
+
+/*
+ * Known SMU commands
+ *
+ * Most of what is below comes from looking at the Open Firmware driver,
+ * though this is still incomplete and could use better documentation here
+ * or there...
+ */
+
+
+/*
+ * Partition info commands
+ *
+ * I do not know what those are for at this point
+ */
+#define SMU_CMD_PARTITION_COMMAND 0x3e
+
+
+/*
+ * Fan control
+ *
+ * This is a "mux" for fan control commands, first byte is the
+ * "sub" command.
+ */
+#define SMU_CMD_FAN_COMMAND 0x4a
+
+
+/*
+ * Battery access
+ *
+ * Same command number as the PMU, could it be same syntax ?
+ */
+#define SMU_CMD_BATTERY_COMMAND 0x6f
+#define SMU_CMD_GET_BATTERY_INFO 0x00
+
+/*
+ * Real time clock control
+ *
+ * This is a "mux", first data byte contains the "sub" command.
+ * The "RTC" part of the SMU controls the date, time, powerup
+ * timer, but also a PRAM
+ *
+ * Dates are in BCD format on 7 bytes:
+ * [sec] [min] [hour] [weekday] [month day] [month] [year]
+ * with month being 1 based and year minus 100
+ */
+#define SMU_CMD_RTC_COMMAND 0x8e
+#define SMU_CMD_RTC_SET_PWRUP_TIMER 0x00 /* i: 7 bytes date */
+#define SMU_CMD_RTC_GET_PWRUP_TIMER 0x01 /* o: 7 bytes date */
+#define SMU_CMD_RTC_STOP_PWRUP_TIMER 0x02
+#define SMU_CMD_RTC_SET_PRAM_BYTE_ACC 0x20 /* i: 1 byte (address?) */
+#define SMU_CMD_RTC_SET_PRAM_AUTOINC 0x21 /* i: 1 byte (data?) */
+#define SMU_CMD_RTC_SET_PRAM_LO_BYTES 0x22 /* i: 10 bytes */
+#define SMU_CMD_RTC_SET_PRAM_HI_BYTES 0x23 /* i: 10 bytes */
+#define SMU_CMD_RTC_GET_PRAM_BYTE 0x28 /* i: 1 bytes (address?) */
+#define SMU_CMD_RTC_GET_PRAM_LO_BYTES 0x29 /* o: 10 bytes */
+#define SMU_CMD_RTC_GET_PRAM_HI_BYTES 0x2a /* o: 10 bytes */
+#define SMU_CMD_RTC_SET_DATETIME 0x80 /* i: 7 bytes date */
+#define SMU_CMD_RTC_GET_DATETIME 0x81 /* o: 7 bytes date */
+
+ /*
+ * i2c commands
+ *
+ * To issue an i2c command, first is to send a parameter block to the
+ * the SMU. This is a command of type 0x9a with 9 bytes of header
+ * eventually followed by data for a write:
+ *
+ * 0: bus number (from device-tree usually, SMU has lots of busses !)
+ * 1: transfer type/format (see below)
+ * 2: device address. For combined and combined4 type transfers, this
+ * is the "write" version of the address (bit 0x01 cleared)
+ * 3: subaddress length (0..3)
+ * 4: subaddress byte 0 (or only byte for subaddress length 1)
+ * 5: subaddress byte 1
+ * 6: subaddress byte 2
+ * 7: combined address (device address for combined mode data phase)
+ * 8: data length
+ *
+ * The transfer types are the same good old Apple ones it seems,
+ * that is:
+ * - 0x00: Simple transfer
+ * - 0x01: Subaddress transfer (addr write + data tx, no restart)
+ * - 0x02: Combined transfer (addr write + restart + data tx)
+ *
+ * This is then followed by actual data for a write.
+ *
+ * At this point, the OF driver seems to have a limitation on transfer
+ * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know
+ * wether this is just an OF limit due to some temporary buffer size
+ * or if this is an SMU imposed limit. This driver has the same limitation
+ * for now as I use a 0x10 bytes temporary buffer as well
+ *
+ * Once that is completed, a response is expected from the SMU. This is
+ * obtained via a command of type 0x9a with a length of 1 byte containing
+ * 0 as the data byte. OF also fills the rest of the data buffer with 0xff's
+ * though I can't tell yet if this is actually necessary. Once this command
+ * is complete, at this point, all I can tell is what OF does. OF tests
+ * byte 0 of the reply:
+ * - on read, 0xfe or 0xfc : bus is busy, wait (see below) or nak ?
+ * - on read, 0x00 or 0x01 : reply is in buffer (after the byte 0)
+ * - on write, < 0 -> failure (immediate exit)
+ * - else, OF just exists (without error, weird)
+ *
+ * So on read, there is this wait-for-busy thing when getting a 0xfc or
+ * 0xfe result. OF does a loop of up to 64 retries, waiting 20ms and
+ * doing the above again until either the retries expire or the result
+ * is no longer 0xfe or 0xfc
+ *
+ * The Darwin I2C driver is less subtle though. On any non-success status
+ * from the response command, it waits 5ms and tries again up to 20 times,
+ * it doesn't differenciate between fatal errors or "busy" status.
+ *
+ * This driver provides an asynchronous paramblock based i2c command
+ * interface to be used either directly by low level code or by a higher
+ * level driver interfacing to the linux i2c layer. The current
+ * implementation of this relies on working timers & timer interrupts
+ * though, so be careful of calling context for now. This may be "fixed"
+ * in the future by adding a polling facility.
+ */
+#define SMU_CMD_I2C_COMMAND 0x9a
+ /* transfer types */
+#define SMU_I2C_TRANSFER_SIMPLE 0x00
+#define SMU_I2C_TRANSFER_STDSUB 0x01
+#define SMU_I2C_TRANSFER_COMBINED 0x02
+
+/*
+ * Power supply control
+ *
+ * The "sub" command is an ASCII string in the data, the
+ * data lenght is that of the string.
+ *
+ * The VSLEW command can be used to get or set the voltage slewing.
+ * - lenght 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
+ * reply at data offset 6, 7 and 8.
+ * - lenght 8 ("VSLEWxyz") has 3 additional bytes appended, and is
+ * used to set the voltage slewing point. The SMU replies with "DONE"
+ * I yet have to figure out their exact meaning of those 3 bytes in
+ * both cases.
+ *
+ */
+#define SMU_CMD_POWER_COMMAND 0xaa
+#define SMU_CMD_POWER_RESTART "RESTART"
+#define SMU_CMD_POWER_SHUTDOWN "SHUTDOWN"
+#define SMU_CMD_POWER_VOLTAGE_SLEW "VSLEW"
+
+/* Misc commands
+ *
+ * This command seem to be a grab bag of various things
+ */
+#define SMU_CMD_MISC_df_COMMAND 0xdf
+#define SMU_CMD_MISC_df_SET_DISPLAY_LIT 0x02 /* i: 1 byte */
+#define SMU_CMD_MISC_df_NMI_OPTION 0x04
+
+/*
+ * Version info commands
+ *
+ * I haven't quite tried to figure out how these work
+ */
+#define SMU_CMD_VERSION_COMMAND 0xea
+
+
+/*
+ * Misc commands
+ *
+ * This command seem to be a grab bag of various things
+ */
+#define SMU_CMD_MISC_ee_COMMAND 0xee
+#define SMU_CMD_MISC_ee_GET_DATABLOCK_REC 0x02
+#define SMU_CMD_MISC_ee_LEDS_CTRL 0x04 /* i: 00 (00,01) [00] */
+#define SMU_CMD_MISC_ee_GET_DATA 0x05 /* i: 00 , o: ?? */
+
+
+
+/*
+ * - Kernel side interface -
+ */
+
+#ifdef __KERNEL__
+
+/*
+ * Asynchronous SMU commands
+ *
+ * Fill up this structure and submit it via smu_queue_command(),
+ * and get notified by the optional done() callback, or because
+ * status becomes != 1
+ */
+
+struct smu_cmd;
+
+struct smu_cmd
+{
+ /* public */
+ u8 cmd; /* command */
+ int data_len; /* data len */
+ int reply_len; /* reply len */
+ void *data_buf; /* data buffer */
+ void *reply_buf; /* reply buffer */
+ int status; /* command status */
+ void (*done)(struct smu_cmd *cmd, void *misc);
+ void *misc;
+
+ /* private */
+ struct list_head link;
+};
+
+/*
+ * Queues an SMU command, all fields have to be initialized
+ */
+extern int smu_queue_cmd(struct smu_cmd *cmd);
+
+/*
+ * Simple command wrapper. This structure embeds a small buffer
+ * to ease sending simple SMU commands from the stack
+ */
+struct smu_simple_cmd
+{
+ struct smu_cmd cmd;
+ u8 buffer[16];
+};
+
+/*
+ * Queues a simple command. All fields will be initialized by that
+ * function
+ */
+extern int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command,
+ unsigned int data_len,
+ void (*done)(struct smu_cmd *cmd, void *misc),
+ void *misc,
+ ...);
+
+/*
+ * Completion helper. Pass it to smu_queue_simple or as 'done'
+ * member to smu_queue_cmd, it will call complete() on the struct
+ * completion passed in the "misc" argument
+ */
+extern void smu_done_complete(struct smu_cmd *cmd, void *misc);
+
+/*
+ * Synchronous helpers. Will spin-wait for completion of a command
+ */
+extern void smu_spinwait_cmd(struct smu_cmd *cmd);
+
+static inline void smu_spinwait_simple(struct smu_simple_cmd *scmd)
+{
+ smu_spinwait_cmd(&scmd->cmd);
+}
+
+/*
+ * Poll routine to call if blocked with irqs off
+ */
+extern void smu_poll(void);
+
+
+/*
+ * Init routine, presence check....
+ */
+extern int smu_init(void);
+extern int smu_present(void);
+struct of_device;
+extern struct of_device *smu_get_ofdev(void);
+
+
+/*
+ * Common command wrappers
+ */
+extern void smu_shutdown(void);
+extern void smu_restart(void);
+struct rtc_time;
+extern int smu_get_rtc_time(struct rtc_time *time, int spinwait);
+extern int smu_set_rtc_time(struct rtc_time *time, int spinwait);
+
+/*
+ * SMU command buffer absolute address, exported by pmac_setup,
+ * this is allocated very early during boot.
+ */
+extern unsigned long smu_cmdbuf_abs;
+
+
+/*
+ * Kenrel asynchronous i2c interface
+ */
+
+/* SMU i2c header, exactly matches i2c header on wire */
+struct smu_i2c_param
+{
+ u8 bus; /* SMU bus ID (from device tree) */
+ u8 type; /* i2c transfer type */
+ u8 devaddr; /* device address (includes direction) */
+ u8 sublen; /* subaddress length */
+ u8 subaddr[3]; /* subaddress */
+ u8 caddr; /* combined address, filled by SMU driver */
+ u8 datalen; /* length of transfer */
+ u8 data[7]; /* data */
+};
+
+#define SMU_I2C_READ_MAX 0x0d
+#define SMU_I2C_WRITE_MAX 0x05
+
+struct smu_i2c_cmd
+{
+ /* public */
+ struct smu_i2c_param info;
+ void (*done)(struct smu_i2c_cmd *cmd, void *misc);
+ void *misc;
+ int status; /* 1 = pending, 0 = ok, <0 = fail */
+
+ /* private */
+ struct smu_cmd scmd;
+ int read;
+ int stage;
+ int retries;
+ u8 pdata[0x10];
+ struct list_head link;
+};
+
+/*
+ * Call this to queue an i2c command to the SMU. You must fill info,
+ * including info.data for a write, done and misc.
+ * For now, no polling interface is provided so you have to use completion
+ * callback.
+ */
+extern int smu_queue_i2c(struct smu_i2c_cmd *cmd);
+
+
+#endif /* __KERNEL__ */
+
+/*
+ * - Userland interface -
+ */
+
+/*
+ * A given instance of the device can be configured for 2 different
+ * things at the moment:
+ *
+ * - sending SMU commands (default at open() time)
+ * - receiving SMU events (not yet implemented)
+ *
+ * Commands are written with write() of a command block. They can be
+ * "driver" commands (for example to switch to event reception mode)
+ * or real SMU commands. They are made of a header followed by command
+ * data if any.
+ *
+ * For SMU commands (not for driver commands), you can then read() back
+ * a reply. The reader will be blocked or not depending on how the device
+ * file is opened. poll() isn't implemented yet. The reply will consist
+ * of a header as well, followed by the reply data if any. You should
+ * always provide a buffer large enough for the maximum reply data, I
+ * recommand one page.
+ *
+ * It is illegal to send SMU commands through a file descriptor configured
+ * for events reception
+ *
+ */
+struct smu_user_cmd_hdr
+{
+ __u32 cmdtype;
+#define SMU_CMDTYPE_SMU 0 /* SMU command */
+#define SMU_CMDTYPE_WANTS_EVENTS 1 /* switch fd to events mode */
+
+ __u8 cmd; /* SMU command byte */
+ __u32 data_len; /* Lenght of data following */
+};
+
+struct smu_user_reply_hdr
+{
+ __u32 status; /* Command status */
+ __u32 reply_len; /* Lenght of data follwing */
+};
+
+#endif /* _SMU_H */
diff --git a/include/asm-powerpc/uninorth.h b/include/asm-powerpc/uninorth.h
new file mode 100644
index 00000000000..f737732c386
--- /dev/null
+++ b/include/asm-powerpc/uninorth.h
@@ -0,0 +1,229 @@
+/*
+ * uninorth.h: definitions for using the "UniNorth" host bridge chip
+ * from Apple. This chip is used on "Core99" machines
+ * This also includes U2 used on more recent MacRISC2/3
+ * machines and U3 (G5)
+ *
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_UNINORTH_H__
+#define __ASM_UNINORTH_H__
+
+/*
+ * Uni-N and U3 config space reg. definitions
+ *
+ * (Little endian)
+ */
+
+/* Address ranges selection. This one should work with Bandit too */
+/* Not U3 */
+#define UNI_N_ADDR_SELECT 0x48
+#define UNI_N_ADDR_COARSE_MASK 0xffff0000 /* 256Mb regions at *0000000 */
+#define UNI_N_ADDR_FINE_MASK 0x0000ffff /* 16Mb regions at f*000000 */
+
+/* AGP registers */
+/* Not U3 */
+#define UNI_N_CFG_GART_BASE 0x8c
+#define UNI_N_CFG_AGP_BASE 0x90
+#define UNI_N_CFG_GART_CTRL 0x94
+#define UNI_N_CFG_INTERNAL_STATUS 0x98
+#define UNI_N_CFG_GART_DUMMY_PAGE 0xa4
+
+/* UNI_N_CFG_GART_CTRL bits definitions */
+#define UNI_N_CFG_GART_INVAL 0x00000001
+#define UNI_N_CFG_GART_ENABLE 0x00000100
+#define UNI_N_CFG_GART_2xRESET 0x00010000
+#define UNI_N_CFG_GART_DISSBADET 0x00020000
+/* The following seems to only be used only on U3 <j.glisse@gmail.com> */
+#define U3_N_CFG_GART_SYNCMODE 0x00040000
+#define U3_N_CFG_GART_PERFRD 0x00080000
+#define U3_N_CFG_GART_B2BGNT 0x00200000
+#define U3_N_CFG_GART_FASTDDR 0x00400000
+
+/* My understanding of UniNorth AGP as of UniNorth rev 1.0x,
+ * revision 1.5 (x4 AGP) may need further changes.
+ *
+ * AGP_BASE register contains the base address of the AGP aperture on
+ * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x,
+ * even if decoding of this address range is enabled in the address select
+ * register. Apparently, the only supported bases are 256Mb multiples
+ * (high 4 bits of that register).
+ *
+ * GART_BASE register appear to contain the physical address of the GART
+ * in system memory in the high address bits (page aligned), and the
+ * GART size in the low order bits (number of GART pages)
+ *
+ * The GART format itself is one 32bits word per physical memory page.
+ * This word contains, in little-endian format (!!!), the physical address
+ * of the page in the high bits, and what appears to be an "enable" bit
+ * in the LSB bit (0) that must be set to 1 when the entry is valid.
+ *
+ * Obviously, the GART is not cache coherent and so any change to it
+ * must be flushed to memory (or maybe just make the GART space non
+ * cachable). AGP memory itself doens't seem to be cache coherent neither.
+ *
+ * In order to invalidate the GART (which is probably necessary to inval
+ * the bridge internal TLBs), the following sequence has to be written,
+ * in order, to the GART_CTRL register:
+ *
+ * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
+ * UNI_N_CFG_GART_ENABLE
+ * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET
+ * UNI_N_CFG_GART_ENABLE
+ *
+ * As far as AGP "features" are concerned, it looks like fast write may
+ * not be supported but this has to be confirmed.
+ *
+ * Turning on AGP seem to require a double invalidate operation, one before
+ * setting the AGP command register, on after.
+ *
+ * Turning off AGP seems to require the following sequence: first wait
+ * for the AGP to be idle by reading the internal status register, then
+ * write in that order to the GART_CTRL register:
+ *
+ * UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
+ * 0
+ * UNI_N_CFG_GART_2xRESET
+ * 0
+ */
+
+/*
+ * Uni-N memory mapped reg. definitions
+ *
+ * Those registers are Big-Endian !!
+ *
+ * Their meaning come from either Darwin and/or from experiments I made with
+ * the bootrom, I'm not sure about their exact meaning yet
+ *
+ */
+
+/* Version of the UniNorth chip */
+#define UNI_N_VERSION 0x0000 /* Known versions: 3,7 and 8 */
+
+#define UNI_N_VERSION_107 0x0003 /* 1.0.7 */
+#define UNI_N_VERSION_10A 0x0007 /* 1.0.10 */
+#define UNI_N_VERSION_150 0x0011 /* 1.5 */
+#define UNI_N_VERSION_200 0x0024 /* 2.0 */
+#define UNI_N_VERSION_PANGEA 0x00C0 /* Integrated U1 + K */
+#define UNI_N_VERSION_INTREPID 0x00D2 /* Integrated U2 + K */
+#define UNI_N_VERSION_300 0x0030 /* 3.0 (U3 on G5) */
+
+/* This register is used to enable/disable various clocks */
+#define UNI_N_CLOCK_CNTL 0x0020
+#define UNI_N_CLOCK_CNTL_PCI 0x00000001 /* PCI2 clock control */
+#define UNI_N_CLOCK_CNTL_GMAC 0x00000002 /* GMAC clock control */
+#define UNI_N_CLOCK_CNTL_FW 0x00000004 /* FireWire clock control */
+#define UNI_N_CLOCK_CNTL_ATA100 0x00000010 /* ATA-100 clock control (U2) */
+
+/* Power Management control */
+#define UNI_N_POWER_MGT 0x0030
+#define UNI_N_POWER_MGT_NORMAL 0x00
+#define UNI_N_POWER_MGT_IDLE2 0x01
+#define UNI_N_POWER_MGT_SLEEP 0x02
+
+/* This register is configured by Darwin depending on the UniN
+ * revision
+ */
+#define UNI_N_ARB_CTRL 0x0040
+#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT 15
+#define UNI_N_ARB_CTRL_QACK_DELAY_MASK 0x0e1f8000
+#define UNI_N_ARB_CTRL_QACK_DELAY 0x30
+#define UNI_N_ARB_CTRL_QACK_DELAY105 0x00
+
+/* This one _might_ return the CPU number of the CPU reading it;
+ * the bootROM decides whether to boot or to sleep/spinloop depending
+ * on this register beeing 0 or not
+ */
+#define UNI_N_CPU_NUMBER 0x0050
+
+/* This register appear to be read by the bootROM to decide what
+ * to do on a non-recoverable reset (powerup or wakeup)
+ */
+#define UNI_N_HWINIT_STATE 0x0070
+#define UNI_N_HWINIT_STATE_SLEEPING 0x01
+#define UNI_N_HWINIT_STATE_RUNNING 0x02
+/* This last bit appear to be used by the bootROM to know the second
+ * CPU has started and will enter it's sleep loop with IP=0
+ */
+#define UNI_N_HWINIT_STATE_CPU1_FLAG 0x10000000
+
+/* This register controls AACK delay, which is set when 2004 iBook/PowerBook
+ * is in low speed mode.
+ */
+#define UNI_N_AACK_DELAY 0x0100
+#define UNI_N_AACK_DELAY_ENABLE 0x00000001
+
+/* Clock status for Intrepid */
+#define UNI_N_CLOCK_STOP_STATUS0 0x0150
+#define UNI_N_CLOCK_STOPPED_EXTAGP 0x00200000
+#define UNI_N_CLOCK_STOPPED_AGPDEL 0x00100000
+#define UNI_N_CLOCK_STOPPED_I2S0_45_49 0x00080000
+#define UNI_N_CLOCK_STOPPED_I2S0_18 0x00040000
+#define UNI_N_CLOCK_STOPPED_I2S1_45_49 0x00020000
+#define UNI_N_CLOCK_STOPPED_I2S1_18 0x00010000
+#define UNI_N_CLOCK_STOPPED_TIMER 0x00008000
+#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18 0x00004000
+#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32 0x00002000
+#define UNI_N_CLOCK_STOPPED_SCC_VIA32 0x00001000
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT0 0x00000800
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT1 0x00000400
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT2 0x00000200
+#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO 0x00000100
+#define UNI_N_CLOCK_STOPPED_VEO0 0x00000080
+#define UNI_N_CLOCK_STOPPED_VEO1 0x00000040
+#define UNI_N_CLOCK_STOPPED_USB0 0x00000020
+#define UNI_N_CLOCK_STOPPED_USB1 0x00000010
+#define UNI_N_CLOCK_STOPPED_USB2 0x00000008
+#define UNI_N_CLOCK_STOPPED_32 0x00000004
+#define UNI_N_CLOCK_STOPPED_45 0x00000002
+#define UNI_N_CLOCK_STOPPED_49 0x00000001
+
+#define UNI_N_CLOCK_STOP_STATUS1 0x0160
+#define UNI_N_CLOCK_STOPPED_PLL4REF 0x00080000
+#define UNI_N_CLOCK_STOPPED_CPUDEL 0x00040000
+#define UNI_N_CLOCK_STOPPED_CPU 0x00020000
+#define UNI_N_CLOCK_STOPPED_BUF_REFCKO 0x00010000
+#define UNI_N_CLOCK_STOPPED_PCI2 0x00008000
+#define UNI_N_CLOCK_STOPPED_FW 0x00004000
+#define UNI_N_CLOCK_STOPPED_GB 0x00002000
+#define UNI_N_CLOCK_STOPPED_ATA66 0x00001000
+#define UNI_N_CLOCK_STOPPED_ATA100 0x00000800
+#define UNI_N_CLOCK_STOPPED_MAX 0x00000400
+#define UNI_N_CLOCK_STOPPED_PCI1 0x00000200
+#define UNI_N_CLOCK_STOPPED_KLPCI 0x00000100
+#define UNI_N_CLOCK_STOPPED_USB0PCI 0x00000080
+#define UNI_N_CLOCK_STOPPED_USB1PCI 0x00000040
+#define UNI_N_CLOCK_STOPPED_USB2PCI 0x00000020
+#define UNI_N_CLOCK_STOPPED_7PCI1 0x00000008
+#define UNI_N_CLOCK_STOPPED_AGP 0x00000004
+#define UNI_N_CLOCK_STOPPED_PCI0 0x00000002
+#define UNI_N_CLOCK_STOPPED_18 0x00000001
+
+/* Intrepid registe to OF do-platform-clockspreading */
+#define UNI_N_CLOCK_SPREADING 0x190
+
+/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */
+
+
+/*
+ * U3 specific registers
+ */
+
+
+/* U3 Toggle */
+#define U3_TOGGLE_REG 0x00e0
+#define U3_PMC_START_STOP 0x0001
+#define U3_MPIC_RESET 0x0002
+#define U3_MPIC_OUTPUT_ENABLE 0x0004
+
+/* U3 API PHY Config 1 */
+#define U3_API_PHY_CONFIG_1 0x23030
+
+/* U3 HyperTransport registers */
+#define U3_HT_CONFIG_BASE 0x70000
+#define U3_HT_LINK_COMMAND 0x100
+#define U3_HT_LINK_CONFIG 0x110
+#define U3_HT_LINK_FREQ 0x120
+
+#endif /* __ASM_UNINORTH_H__ */
+#endif /* __KERNEL__ */