Merge branch 'linus' into cpus4096

Conflicts:

	drivers/acpi/processor_throttling.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 0 insertions, 204 deletions

diff --git a/include/asm-ppc/ibm_ocp.h b/include/asm-ppc/ibm_ocp.h
deleted file mode 100644
index ddce616f765..00000000000
--- a/include/asm-ppc/ibm_ocp.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * ibm_ocp.h
- *
- *      (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
- *          Mipsys - France
- *
- *          Derived from work (c) Armin Kuster akuster@pacbell.net
- *
- *          Additional support and port to 2.6 LDM/sysfs by
- *          Matt Porter <mporter@kernel.crashing.org>
- *          Copyright 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __IBM_OCP_H__
-#define __IBM_OCP_H__
-
-#include <asm/types.h>
-
-/*
- * IBM 4xx OCP system information
- */
-struct ocp_sys_info_data {
-	int	opb_bus_freq;	/* OPB Bus Frequency (Hz) */
-	int	ebc_bus_freq;	/* EBC Bus Frequency (Hz) */
-};
-
-extern struct ocp_sys_info_data ocp_sys_info;
-
-/*
- * EMAC additional data and sysfs support
- *
- * Note about mdio_idx: When you have a zmii, it's usually
- * not necessary, it covers the case of the 405EP which has
- * the MDIO lines on EMAC0 only
- *
- * Note about phy_map: Per EMAC map of PHY ids which should
- * be probed by emac_probe. Different EMACs can have
- * overlapping maps.
- *
- * Note, this map uses inverse logic for bits:
- *  0 - id should be probed
- *  1 - id should be ignored
- *
- * Default value of 0x00000000 - will result in usual
- * auto-detection logic.
- *
- */
-
-struct ocp_func_emac_data {
-	int	rgmii_idx;	/* RGMII device index or -1 */
-	int	rgmii_mux;	/* RGMII input of this EMAC */
-	int	zmii_idx;	/* ZMII device index or -1 */
-	int	zmii_mux;	/* ZMII input of this EMAC */
-	int	mal_idx;	/* MAL device index */
-	int	mal_rx_chan;	/* MAL rx channel number */
-	int	mal_tx_chan;	/* MAL tx channel number */
-	int	wol_irq;	/* WOL interrupt */
-	int	mdio_idx;	/* EMAC idx of MDIO master or -1 */
-	int	tah_idx;	/* TAH device index or -1 */
-	int	phy_mode;	/* PHY type or configurable mode */
-	u8	mac_addr[6];	/* EMAC mac address */
-	u32	phy_map;	/* EMAC phy map */
-	u32	phy_feat_exc;	/* Excluded PHY features */
-};
-
-/* Sysfs support */
-#define OCP_SYSFS_EMAC_DATA()						\
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_idx)	\
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_mux)	\
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_idx)	\
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_mux)	\
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_idx)	\
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_rx_chan)	\
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_tx_chan)	\
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, wol_irq)	\
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mdio_idx)	\
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, tah_idx)	\
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, phy_mode)	\
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_map)	\
-OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_feat_exc)\
-									\
-void ocp_show_emac_data(struct device *dev)				\
-{									\
-	device_create_file(dev, &dev_attr_emac_rgmii_idx);		\
-	device_create_file(dev, &dev_attr_emac_rgmii_mux);		\
-	device_create_file(dev, &dev_attr_emac_zmii_idx);		\
-	device_create_file(dev, &dev_attr_emac_zmii_mux);		\
-	device_create_file(dev, &dev_attr_emac_mal_idx);		\
-	device_create_file(dev, &dev_attr_emac_mal_rx_chan);		\
-	device_create_file(dev, &dev_attr_emac_mal_tx_chan);		\
-	device_create_file(dev, &dev_attr_emac_wol_irq);		\
-	device_create_file(dev, &dev_attr_emac_mdio_idx);		\
-	device_create_file(dev, &dev_attr_emac_tah_idx);		\
-	device_create_file(dev, &dev_attr_emac_phy_mode);		\
-	device_create_file(dev, &dev_attr_emac_phy_map);		\
-	device_create_file(dev, &dev_attr_emac_phy_feat_exc);		\
-}
-
-/*
- * PHY mode settings (EMAC <-> ZMII/RGMII bridge <-> PHY)
- */
-#define PHY_MODE_NA	0
-#define PHY_MODE_MII	1
-#define PHY_MODE_RMII	2
-#define PHY_MODE_SMII	3
-#define PHY_MODE_RGMII	4
-#define PHY_MODE_TBI	5
-#define PHY_MODE_GMII	6
-#define PHY_MODE_RTBI	7
-#define PHY_MODE_SGMII	8
-
-#ifdef CONFIG_40x
-/*
- * Helper function to copy MAC addresses from the bd_t to OCP EMAC
- * additions.
- *
- * The range of EMAC indices (inclusive) to be copied are the arguments.
- */
-static inline void ibm_ocp_set_emac(int start, int end)
-{
-	int i;
-	struct ocp_def *def;
-
-	/* Copy MAC addresses to EMAC additions */
-	for (i=start; i<=end; i++) {
-		def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
-		if (i == 0)
-			memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
-			       __res.bi_enetaddr, 6);
-#if defined(CONFIG_405EP) || defined(CONFIG_44x)
-		else if (i == 1)
-			memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
-			       __res.bi_enet1addr, 6);
-#endif
-#if defined(CONFIG_440GX)
-		else if (i == 2)
-			memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
-			       __res.bi_enet2addr, 6);
-		else if (i == 3)
-			memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
-			       __res.bi_enet3addr, 6);
-#endif
-	}
-}
-#endif
-
-/*
- * MAL additional data and sysfs support
- */
-struct ocp_func_mal_data {
-	int	num_tx_chans;	/* Number of TX channels */
-	int	num_rx_chans;	/* Number of RX channels */
-	int 	txeob_irq;	/* TX End Of Buffer IRQ  */
-	int 	rxeob_irq;	/* RX End Of Buffer IRQ  */
-	int	txde_irq;	/* TX Descriptor Error IRQ */
-	int	rxde_irq;	/* RX Descriptor Error IRQ */
-	int	serr_irq;	/* MAL System Error IRQ    */
-	int	dcr_base;	/* MALx_CFG DCR number   */
-};
-
-#define OCP_SYSFS_MAL_DATA()						\
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_tx_chans)	\
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_rx_chans)	\
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txeob_irq)	\
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxeob_irq)	\
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txde_irq)	\
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxde_irq)	\
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, serr_irq)	\
-OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, dcr_base)	\
-									\
-void ocp_show_mal_data(struct device *dev)				\
-{									\
-	device_create_file(dev, &dev_attr_mal_num_tx_chans);		\
-	device_create_file(dev, &dev_attr_mal_num_rx_chans);		\
-	device_create_file(dev, &dev_attr_mal_txeob_irq);		\
-	device_create_file(dev, &dev_attr_mal_rxeob_irq);		\
-	device_create_file(dev, &dev_attr_mal_txde_irq);		\
-	device_create_file(dev, &dev_attr_mal_rxde_irq);		\
-	device_create_file(dev, &dev_attr_mal_serr_irq);		\
-	device_create_file(dev, &dev_attr_mal_dcr_base);		\
-}
-
-/*
- * IIC additional data and sysfs support
- */
-struct ocp_func_iic_data {
-	int	fast_mode;	/* IIC fast mode enabled */
-};
-
-#define OCP_SYSFS_IIC_DATA()						\
-OCP_SYSFS_ADDTL(struct ocp_func_iic_data, "%d\n", iic, fast_mode)	\
-									\
-void ocp_show_iic_data(struct device *dev)				\
-{									\
-	device_create_file(dev, &dev_attr_iic_fast_mode);		\
-}
-#endif /* __IBM_OCP_H__ */
-#endif /* __KERNEL__ */