Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 400 insertions, 0 deletions

diff --git a/include/asm-ppc/irq.h b/include/asm-ppc/irq.h
new file mode 100644
index 00000000000..06b86be61ed
--- /dev/null
+++ b/include/asm-ppc/irq.h
@@ -0,0 +1,400 @@
+#ifdef __KERNEL__
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#include <linux/config.h>
+#include <asm/machdep.h>		/* ppc_md */
+#include <asm/atomic.h>
+
+/*
+ * These constants are used for passing information about interrupt
+ * signal polarity and level/edge sensing to the low-level PIC chip
+ * drivers.
+ */
+#define IRQ_SENSE_MASK		0x1
+#define IRQ_SENSE_LEVEL		0x1	/* interrupt on active level */
+#define IRQ_SENSE_EDGE		0x0	/* interrupt triggered by edge */
+
+#define IRQ_POLARITY_MASK	0x2
+#define IRQ_POLARITY_POSITIVE	0x2	/* high level or low->high edge */
+#define IRQ_POLARITY_NEGATIVE	0x0	/* low level or high->low edge */
+
+#if defined(CONFIG_40x)
+#include <asm/ibm4xx.h>
+
+#ifndef NR_BOARD_IRQS
+#define NR_BOARD_IRQS 0
+#endif
+
+#ifndef UIC_WIDTH /* Number of interrupts per device */
+#define UIC_WIDTH 32
+#endif
+
+#ifndef NR_UICS /* number  of UIC devices */
+#define NR_UICS 1
+#endif
+
+#if defined (CONFIG_403)
+/*
+ * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
+ * 32 possible interrupts, a majority of which are not implemented on
+ * all cores. There are six configurable, external interrupt pins and
+ * there are eight internal interrupts for the on-chip serial port
+ * (SPU), DMA controller, and JTAG controller.
+ *
+ */
+
+#define	NR_AIC_IRQS 32
+#define	NR_IRQS	 (NR_AIC_IRQS + NR_BOARD_IRQS)
+
+#elif !defined (CONFIG_403)
+
+/*
+ *  The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
+ * possible interrupts as well. There are seven, configurable external
+ * interrupt pins and there are 17 internal interrupts for the on-chip
+ * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
+ *
+ */
+
+
+#define NR_UIC_IRQS UIC_WIDTH
+#define NR_IRQS		((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
+#endif
+static __inline__ int
+irq_canonicalize(int irq)
+{
+	return (irq);
+}
+
+#elif defined(CONFIG_44x)
+#include <asm/ibm44x.h>
+
+#define	NR_UIC_IRQS	32
+#define	NR_IRQS		((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
+
+static __inline__ int
+irq_canonicalize(int irq)
+{
+	return (irq);
+}
+
+#elif defined(CONFIG_8xx)
+
+/* Now include the board configuration specific associations.
+*/
+#include <asm/mpc8xx.h>
+
+/* The MPC8xx cores have 16 possible interrupts.  There are eight
+ * possible level sensitive interrupts assigned and generated internally
+ * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
+ * There are eight external interrupts (IRQs) that can be configured
+ * as either level or edge sensitive.
+ *
+ * On some implementations, there is also the possibility of an 8259
+ * through the PCI and PCI-ISA bridges.
+ *
+ * We are "flattening" the interrupt vectors of the cascaded CPM
+ * and 8259 interrupt controllers so that we can uniquely identify
+ * any interrupt source with a single integer.
+ */
+#define NR_SIU_INTS	16
+#define NR_CPM_INTS	32
+#ifndef NR_8259_INTS
+#define NR_8259_INTS 0
+#endif
+
+#define SIU_IRQ_OFFSET		0
+#define CPM_IRQ_OFFSET		(SIU_IRQ_OFFSET + NR_SIU_INTS)
+#define I8259_IRQ_OFFSET	(CPM_IRQ_OFFSET + NR_CPM_INTS)
+
+#define NR_IRQS	(NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
+
+/* These values must be zero-based and map 1:1 with the SIU configuration.
+ * They are used throughout the 8xx I/O subsystem to generate
+ * interrupt masks, flags, and other control patterns.  This is why the
+ * current kernel assumption of the 8259 as the base controller is such
+ * a pain in the butt.
+ */
+#define	SIU_IRQ0	(0)	/* Highest priority */
+#define	SIU_LEVEL0	(1)
+#define	SIU_IRQ1	(2)
+#define	SIU_LEVEL1	(3)
+#define	SIU_IRQ2	(4)
+#define	SIU_LEVEL2	(5)
+#define	SIU_IRQ3	(6)
+#define	SIU_LEVEL3	(7)
+#define	SIU_IRQ4	(8)
+#define	SIU_LEVEL4	(9)
+#define	SIU_IRQ5	(10)
+#define	SIU_LEVEL5	(11)
+#define	SIU_IRQ6	(12)
+#define	SIU_LEVEL6	(13)
+#define	SIU_IRQ7	(14)
+#define	SIU_LEVEL7	(15)
+
+/* The internal interrupts we can configure as we see fit.
+ * My personal preference is CPM at level 2, which puts it above the
+ * MBX PCI/ISA/IDE interrupts.
+ */
+#ifndef PIT_INTERRUPT
+#define PIT_INTERRUPT		SIU_LEVEL0
+#endif
+#ifndef	CPM_INTERRUPT
+#define CPM_INTERRUPT		SIU_LEVEL2
+#endif
+#ifndef	PCMCIA_INTERRUPT
+#define PCMCIA_INTERRUPT	SIU_LEVEL6
+#endif
+#ifndef	DEC_INTERRUPT
+#define DEC_INTERRUPT		SIU_LEVEL7
+#endif
+
+/* Some internal interrupt registers use an 8-bit mask for the interrupt
+ * level instead of a number.
+ */
+#define	mk_int_int_mask(IL) (1 << (7 - (IL/2)))
+
+/* always the same on 8xx -- Cort */
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+#elif defined(CONFIG_83xx)
+#include <asm/mpc83xx.h>
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+#define	NR_IRQS	(NR_IPIC_INTS)
+
+#elif defined(CONFIG_85xx)
+/* Now include the board configuration specific associations.
+*/
+#include <asm/mpc85xx.h>
+
+/* The MPC8560 openpic has  32 internal interrupts and 12 external
+ * interrupts.
+ *
+ * We are "flattening" the interrupt vectors of the cascaded CPM
+ * so that we can uniquely identify any interrupt source with a
+ * single integer.
+ */
+#define NR_CPM_INTS	64
+#define NR_EPIC_INTS	44
+#ifndef NR_8259_INTS
+#define NR_8259_INTS	0
+#endif
+#define NUM_8259_INTERRUPTS NR_8259_INTS
+
+#ifndef CPM_IRQ_OFFSET
+#define CPM_IRQ_OFFSET	0
+#endif
+
+#define NR_IRQS	(NR_EPIC_INTS + NR_CPM_INTS + NR_8259_INTS)
+
+/* Internal IRQs on MPC85xx OpenPIC */
+
+#ifndef MPC85xx_OPENPIC_IRQ_OFFSET
+#ifdef CONFIG_CPM2
+#define MPC85xx_OPENPIC_IRQ_OFFSET	(CPM_IRQ_OFFSET + NR_CPM_INTS)
+#else
+#define MPC85xx_OPENPIC_IRQ_OFFSET	0
+#endif
+#endif
+
+/* Not all of these exist on all MPC85xx implementations */
+#define MPC85xx_IRQ_L2CACHE	( 0 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_ECM		( 1 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DDR		( 2 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_LBIU	( 3 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA0	( 4 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA1	( 5 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA2	( 6 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DMA3	( 7 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_PCI1	( 8 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_PCI2	( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_ERROR	( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_BELL	(10 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_TX	(11 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_RIO_RX	(12 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC1_TX	(13 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC1_RX	(14 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC1_ERROR	(18 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC2_TX	(19 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC2_RX	(20 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_TSEC2_ERROR	(24 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_FEC		(25 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_DUART	(26 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_IIC1	(27 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_PERFMON	(28 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_SEC2	(29 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_CPM		(30 + MPC85xx_OPENPIC_IRQ_OFFSET)
+
+/* The 12 external interrupt lines */
+#define MPC85xx_IRQ_EXT0        (32 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT1        (33 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT2        (34 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT3        (35 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT4        (36 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT5        (37 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT6        (38 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT7        (39 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT8        (40 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT9        (41 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT10       (42 + MPC85xx_OPENPIC_IRQ_OFFSET)
+#define MPC85xx_IRQ_EXT11       (43 + MPC85xx_OPENPIC_IRQ_OFFSET)
+
+/* CPM related interrupts */
+#define	SIU_INT_ERROR		((uint)0x00+CPM_IRQ_OFFSET)
+#define	SIU_INT_I2C		((uint)0x01+CPM_IRQ_OFFSET)
+#define	SIU_INT_SPI		((uint)0x02+CPM_IRQ_OFFSET)
+#define	SIU_INT_RISC		((uint)0x03+CPM_IRQ_OFFSET)
+#define	SIU_INT_SMC1		((uint)0x04+CPM_IRQ_OFFSET)
+#define	SIU_INT_SMC2		((uint)0x05+CPM_IRQ_OFFSET)
+#define	SIU_INT_USB		((uint)0x0b+CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER1		((uint)0x0c+CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER2		((uint)0x0d+CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER3		((uint)0x0e+CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER4		((uint)0x0f+CPM_IRQ_OFFSET)
+#define	SIU_INT_FCC1		((uint)0x20+CPM_IRQ_OFFSET)
+#define	SIU_INT_FCC2		((uint)0x21+CPM_IRQ_OFFSET)
+#define	SIU_INT_FCC3		((uint)0x22+CPM_IRQ_OFFSET)
+#define	SIU_INT_MCC1		((uint)0x24+CPM_IRQ_OFFSET)
+#define	SIU_INT_MCC2		((uint)0x25+CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC1		((uint)0x28+CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC2		((uint)0x29+CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC3		((uint)0x2a+CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC4		((uint)0x2b+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC15		((uint)0x30+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC14		((uint)0x31+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC13		((uint)0x32+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC12		((uint)0x33+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC11		((uint)0x34+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC10		((uint)0x35+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC9		((uint)0x36+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC8		((uint)0x37+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC7		((uint)0x38+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC6		((uint)0x39+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC5		((uint)0x3a+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC4		((uint)0x3b+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC3		((uint)0x3c+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC2		((uint)0x3d+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC1		((uint)0x3e+CPM_IRQ_OFFSET)
+#define	SIU_INT_PC0		((uint)0x3f+CPM_IRQ_OFFSET)
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+#else /* CONFIG_40x + CONFIG_8xx */
+/*
+ * this is the # irq's for all ppc arch's (pmac/chrp/prep)
+ * so it is the max of them all
+ */
+#define NR_IRQS			256
+
+#ifndef CONFIG_8260
+
+#define NUM_8259_INTERRUPTS	16
+
+#else /* CONFIG_8260 */
+
+/* The 8260 has an internal interrupt controller with a maximum of
+ * 64 IRQs.  We will use NR_IRQs from above since it is large enough.
+ * Don't be confused by the 8260 documentation where they list an
+ * "interrupt number" and "interrupt vector".  We are only interested
+ * in the interrupt vector.  There are "reserved" holes where the
+ * vector number increases, but the interrupt number in the table does not.
+ * (Document errata updates have fixed this...make sure you have up to
+ * date processor documentation -- Dan).
+ */
+
+#ifndef CPM_IRQ_OFFSET
+#define CPM_IRQ_OFFSET	0
+#endif
+
+#define NR_CPM_INTS	64
+
+#define	SIU_INT_ERROR		((uint)0x00 + CPM_IRQ_OFFSET)
+#define	SIU_INT_I2C		((uint)0x01 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SPI		((uint)0x02 + CPM_IRQ_OFFSET)
+#define	SIU_INT_RISC		((uint)0x03 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SMC1		((uint)0x04 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SMC2		((uint)0x05 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IDMA1		((uint)0x06 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IDMA2		((uint)0x07 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IDMA3		((uint)0x08 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IDMA4		((uint)0x09 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SDMA		((uint)0x0a + CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER1		((uint)0x0c + CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER2		((uint)0x0d + CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER3		((uint)0x0e + CPM_IRQ_OFFSET)
+#define	SIU_INT_TIMER4		((uint)0x0f + CPM_IRQ_OFFSET)
+#define	SIU_INT_TMCNT		((uint)0x10 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PIT		((uint)0x11 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ1		((uint)0x13 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ2		((uint)0x14 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ3		((uint)0x15 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ4		((uint)0x16 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ5		((uint)0x17 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ6		((uint)0x18 + CPM_IRQ_OFFSET)
+#define	SIU_INT_IRQ7		((uint)0x19 + CPM_IRQ_OFFSET)
+#define	SIU_INT_FCC1		((uint)0x20 + CPM_IRQ_OFFSET)
+#define	SIU_INT_FCC2		((uint)0x21 + CPM_IRQ_OFFSET)
+#define	SIU_INT_FCC3		((uint)0x22 + CPM_IRQ_OFFSET)
+#define	SIU_INT_MCC1		((uint)0x24 + CPM_IRQ_OFFSET)
+#define	SIU_INT_MCC2		((uint)0x25 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC1		((uint)0x28 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC2		((uint)0x29 + CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC3		((uint)0x2a + CPM_IRQ_OFFSET)
+#define	SIU_INT_SCC4		((uint)0x2b + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC15		((uint)0x30 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC14		((uint)0x31 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC13		((uint)0x32 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC12		((uint)0x33 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC11		((uint)0x34 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC10		((uint)0x35 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC9		((uint)0x36 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC8		((uint)0x37 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC7		((uint)0x38 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC6		((uint)0x39 + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC5		((uint)0x3a + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC4		((uint)0x3b + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC3		((uint)0x3c + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC2		((uint)0x3d + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC1		((uint)0x3e + CPM_IRQ_OFFSET)
+#define	SIU_INT_PC0		((uint)0x3f + CPM_IRQ_OFFSET)
+
+#endif /* CONFIG_8260 */
+
+/*
+ * This gets called from serial.c, which is now used on
+ * powermacs as well as prep/chrp boxes.
+ * Prep and chrp both have cascaded 8259 PICs.
+ */
+static __inline__ int irq_canonicalize(int irq)
+{
+	if (ppc_md.irq_canonicalize)
+		return ppc_md.irq_canonicalize(irq);
+	return irq;
+}
+
+#endif
+
+#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
+/* pedantic: these are long because they are used with set_bit --RR */
+extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+extern unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
+extern atomic_t ppc_n_lost_interrupts;
+
+struct irqaction;
+struct pt_regs;
+int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* _ASM_IRQ_H */
+#endif /* __KERNEL__ */