powerpc: merge ptrace.h

Move struct ptregs32 into asm-ppc64/ppc32.h

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>

2 files changed, 16 insertions, 213 deletions

diff --git a/include/asm-ppc64/ppc32.h b/include/asm-ppc64/ppc32.h
index 3945a55d112..90e56277179 100644
--- a/include/asm-ppc64/ppc32.h
+++ b/include/asm-ppc64/ppc32.h
@@ -91,6 +91,22 @@ typedef struct sigaltstack_32 {
 	compat_size_t ss_size;
 } stack_32_t;
 
+struct pt_regs32 {
+	unsigned int gpr[32];
+	unsigned int nip;
+	unsigned int msr;
+	unsigned int orig_gpr3;		/* Used for restarting system calls */
+	unsigned int ctr;
+	unsigned int link;
+	unsigned int xer;
+	unsigned int ccr;
+	unsigned int mq;		/* 601 only (not used at present) */
+	unsigned int trap;		/* Reason for being here */
+	unsigned int dar;		/* Fault registers */
+	unsigned int dsisr;
+	unsigned int result;		/* Result of a system call */
+};
+
 struct sigcontext32 {
 	unsigned int	_unused[4];
 	int		signal;
diff --git a/include/asm-ppc64/ptrace.h b/include/asm-ppc64/ptrace.h
deleted file mode 100644
index 3a55377f1fd..00000000000
--- a/include/asm-ppc64/ptrace.h
+++ /dev/null
@@ -1,213 +0,0 @@
-#ifndef _PPC64_PTRACE_H
-#define _PPC64_PTRACE_H
-
-/*
- * Copyright (C) 2001 PPC64 Team, IBM Corp
- *
- * This struct defines the way the registers are stored on the
- * kernel stack during a system call or other kernel entry.
- *
- * this should only contain volatile regs
- * since we can keep non-volatile in the thread_struct
- * should set this up when only volatiles are saved
- * by intr code.
- *
- * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
- * that the overall structure is a multiple of 16 bytes in length.
- *
- * Note that the offsets of the fields in this struct correspond with
- * the PT_* values below.  This simplifies arch/ppc64/kernel/ptrace.c.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __ASSEMBLY__
-
-struct pt_regs {
-	unsigned long gpr[32];
-	unsigned long nip;
-	unsigned long msr;
-	unsigned long orig_gpr3; /* Used for restarting system calls */
-	unsigned long ctr;
-	unsigned long link;
-	unsigned long xer;
-	unsigned long ccr;
-	unsigned long softe;	/* Soft enabled/disabled */
-	unsigned long trap;	/* Reason for being here */
-	unsigned long dar;	/* Fault registers */
-	unsigned long dsisr;
-	unsigned long result;	/* Result of a system call */
-};
-
-struct pt_regs32 {
-	unsigned int gpr[32];
-	unsigned int nip;
-	unsigned int msr;
-	unsigned int orig_gpr3;	/* Used for restarting system calls */
-	unsigned int ctr;
-	unsigned int link;
-	unsigned int xer;
-	unsigned int ccr;
-	unsigned int mq;	/* 601 only (not used at present) */
-	unsigned int trap;	/* Reason for being here */
-	unsigned int dar;	/* Fault registers */
-	unsigned int dsisr;
-	unsigned int result;	/* Result of a system call */
-};
-
-#ifdef __KERNEL__
-
-#define instruction_pointer(regs) ((regs)->nip)
-
-#ifdef CONFIG_SMP
-extern unsigned long profile_pc(struct pt_regs *regs);
-#else
-#define profile_pc(regs) instruction_pointer(regs)
-#endif
-
-#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
-
-#define force_successful_syscall_return()   \
-		(current_thread_info()->syscall_noerror = 1)
-
-/*
- * We use the least-significant bit of the trap field to indicate
- * whether we have saved the full set of registers, or only a
- * partial set.  A 1 there means the partial set.
- */
-#define FULL_REGS(regs)		(((regs)->trap & 1) == 0)
-#define TRAP(regs)		((regs)->trap & ~0xF)
-#define CHECK_FULL_REGS(regs)	BUG_ON(regs->trap & 1)
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASSEMBLY__ */
-
-#define STACK_FRAME_OVERHEAD	112	/* size of minimum stack frame */
-
-/* Size of dummy stack frame allocated when calling signal handler. */
-#define __SIGNAL_FRAMESIZE	128
-#define __SIGNAL_FRAMESIZE32	64
-
-/*
- * Offsets used by 'ptrace' system call interface.
- */
-#define PT_R0	0
-#define PT_R1	1
-#define PT_R2	2
-#define PT_R3	3
-#define PT_R4	4
-#define PT_R5	5
-#define PT_R6	6
-#define PT_R7	7
-#define PT_R8	8
-#define PT_R9	9
-#define PT_R10	10
-#define PT_R11	11
-#define PT_R12	12
-#define PT_R13	13
-#define PT_R14	14
-#define PT_R15	15
-#define PT_R16	16
-#define PT_R17	17
-#define PT_R18	18
-#define PT_R19	19
-#define PT_R20	20
-#define PT_R21	21
-#define PT_R22	22
-#define PT_R23	23
-#define PT_R24	24
-#define PT_R25	25
-#define PT_R26	26
-#define PT_R27	27
-#define PT_R28	28
-#define PT_R29	29
-#define PT_R30	30
-#define PT_R31	31
-
-#define PT_NIP	32
-#define PT_MSR	33
-#ifdef __KERNEL__
-#define PT_ORIG_R3 34
-#endif
-#define PT_CTR	35
-#define PT_LNK	36
-#define PT_XER	37
-#define PT_CCR	38
-#define PT_SOFTE 39
-#define PT_TRAP	40
-#define PT_DAR	41
-#define PT_DSISR 42
-#define PT_RESULT 43
-
-#define PT_FPR0	48
-
-/*
- * Kernel and userspace will both use this PT_FPSCR value.  32-bit apps will
- * have visibility to the asm-ppc/ptrace.h header instead of this one.
- */
-#define PT_FPSCR (PT_FPR0 + 32)	/* each FP reg occupies 1 slot in 64-bit space */
-
-#ifdef __KERNEL__
-#define PT_FPSCR32 (PT_FPR0 + 2*32 + 1)	/* each FP reg occupies 2 32-bit userspace slots */
-#endif
-
-#define PT_VR0 82	/* each Vector reg occupies 2 slots in 64-bit */
-#define PT_VSCR (PT_VR0 + 32*2 + 1)
-#define PT_VRSAVE (PT_VR0 + 33*2)
-
-#ifdef __KERNEL__
-#define PT_VR0_32 164	/* each Vector reg occupies 4 slots in 32-bit */
-#define PT_VSCR_32 (PT_VR0 + 32*4 + 3)
-#define PT_VRSAVE_32 (PT_VR0 + 33*4)
-#endif
-
-/*
- * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go. 
- * The transfer totals 34 quadword.  Quadwords 0-31 contain the 
- * corresponding vector registers.  Quadword 32 contains the vscr as the 
- * last word (offset 12) within that quadword.  Quadword 33 contains the 
- * vrsave as the first word (offset 0) within the quadword.
- *
- * This definition of the VMX state is compatible with the current PPC32 
- * ptrace interface.  This allows signal handling and ptrace to use the same 
- * structures.  This also simplifies the implementation of a bi-arch 
- * (combined (32- and 64-bit) gdb.
- */
-#define PTRACE_GETVRREGS	18
-#define PTRACE_SETVRREGS	19
-
-/*
- * While we dont have 64bit book E processors, we need to reserve the
- * relevant ptrace calls for 32bit compatibility.
- */
-#if 0
-#define PTRACE_GETEVRREGS       20
-#define PTRACE_SETEVRREGS       21
-#endif
-
-/*
- * Get or set a debug register. The first 16 are DABR registers and the
- * second 16 are IABR registers.
- */
-#define PTRACE_GET_DEBUGREG	25
-#define PTRACE_SET_DEBUGREG	26
-
-/* Additional PTRACE requests implemented on PowerPC. */
-#define PPC_PTRACE_GETREGS	0x99	/* Get GPRs 0 - 31 */
-#define PPC_PTRACE_SETREGS	0x98	/* Set GPRs 0 - 31 */
-#define PPC_PTRACE_GETFPREGS	0x97	/* Get FPRs 0 - 31 */
-#define PPC_PTRACE_SETFPREGS	0x96	/* Set FPRs 0 - 31 */
-
-/* Calls to trace a 64bit program from a 32bit program */
-#define PPC_PTRACE_PEEKTEXT_3264 0x95
-#define PPC_PTRACE_PEEKDATA_3264 0x94
-#define PPC_PTRACE_POKETEXT_3264 0x93
-#define PPC_PTRACE_POKEDATA_3264 0x92
-#define PPC_PTRACE_PEEKUSR_3264  0x91
-#define PPC_PTRACE_POKEUSR_3264  0x90
-
-#endif /* _PPC64_PTRACE_H */