Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

3 files changed, 142 insertions, 0 deletions

diff --git a/include/asm-sh/bigsur/bigsur.h b/include/asm-sh/bigsur/bigsur.h
new file mode 100644
index 00000000000..427245f9358
--- /dev/null
+++ b/include/asm-sh/bigsur/bigsur.h
@@ -0,0 +1,80 @@
+/*
+ *
+ * Hitachi Big Sur Eval Board support
+ *
+ * Dustin McIntire (dustin@sensoria.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Derived from Hitachi SH7751 reference manual
+ * 
+ */
+
+#ifndef _ASM_BIGSUR_H_
+#define _ASM_BIGSUR_H_
+
+#include <asm/irq.h>
+#include <asm/hd64465/hd64465.h>
+
+/* 7751 Internal IRQ's used by external CPLD controller */
+#define BIGSUR_IRQ_LOW	0
+#define BIGSUR_IRQ_NUM  14         /* External CPLD level 1 IRQs */
+#define BIGSUR_IRQ_HIGH (BIGSUR_IRQ_LOW + BIGSUR_IRQ_NUM)
+#define BIGSUR_2NDLVL_IRQ_LOW   (HD64465_IRQ_BASE+HD64465_IRQ_NUM)  
+#define BIGSUR_2NDLVL_IRQ_NUM   32 /* Level 2 IRQs = 4 regs * 8 bits */
+#define BIGSUR_2NDLVL_IRQ_HIGH  (BIGSUR_2NDLVL_IRQ_LOW + \
+                                 BIGSUR_2NDLVL_IRQ_NUM)
+
+/* PCI interrupt base number (A_INTA-A_INTD) */
+#define BIGSUR_SH7751_PCI_IRQ_BASE  (BIGSUR_2NDLVL_IRQ_LOW+10)  
+
+/* CPLD registers and external chip addresses */
+#define BIGSUR_HD64464_ADDR	0xB2000000
+#define BIGSUR_DGDR	0xB1FFFE00
+#define BIGSUR_BIDR	0xB1FFFD00
+#define BIGSUR_CSLR	0xB1FFFC00
+#define BIGSUR_SW1R	0xB1FFFB00
+#define BIGSUR_DBGR	0xB1FFFA00
+#define BIGSUR_BDTR	0xB1FFF900
+#define BIGSUR_BDRR	0xB1FFF800
+#define BIGSUR_PPR1	0xB1FFF700
+#define BIGSUR_PPR2	0xB1FFF600
+#define BIGSUR_IDE2	0xB1FFF500
+#define BIGSUR_IDE3	0xB1FFF400
+#define BIGSUR_SPCR	0xB1FFF300
+#define BIGSUR_ETHR	0xB1FE0000
+#define BIGSUR_PPDR	0xB1FDFF00
+#define BIGSUR_ICTL	0xB1FDFE00
+#define BIGSUR_ICMD	0xB1FDFD00
+#define BIGSUR_DMA0	0xB1FDFC00
+#define BIGSUR_DMA1	0xB1FDFB00
+#define BIGSUR_IRQ0	0xB1FDFA00
+#define BIGSUR_IRQ1	0xB1FDF900
+#define BIGSUR_IRQ2	0xB1FDF800
+#define BIGSUR_IRQ3	0xB1FDF700
+#define BIGSUR_IMR0	0xB1FDF600
+#define BIGSUR_IMR1	0xB1FDF500
+#define BIGSUR_IMR2	0xB1FDF400
+#define BIGSUR_IMR3	0xB1FDF300
+#define BIGSUR_IRLMR0	0xB1FDF200
+#define BIGSUR_IRLMR1	0xB1FDF100
+#define BIGSUR_V320USC_ADDR  0xB1000000
+#define BIGSUR_HD64465_ADDR  0xB0000000
+#define BIGSUR_INTERNAL_BASE 0xB0000000
+
+/* SMC ethernet card parameters */
+#define BIGSUR_ETHER_IOPORT		0x220
+
+/* IDE register paramters */
+#define BIGSUR_IDECMD_IOPORT	0x1f0
+#define BIGSUR_IDECTL_IOPORT	0x1f8
+
+/* LED bit position in BIGSUR_CSLR */
+#define BIGSUR_LED  (1<<4)
+
+/* PCI: default LOCAL memory window sizes (seen from PCI bus) */
+#define BIGSUR_LSR0_SIZE    (64*(1<<20)) //64MB
+#define BIGSUR_LSR1_SIZE    (64*(1<<20)) //64MB
+
+#endif /* _ASM_BIGSUR_H_ */
diff --git a/include/asm-sh/bigsur/io.h b/include/asm-sh/bigsur/io.h
new file mode 100644
index 00000000000..939735ee8dc
--- /dev/null
+++ b/include/asm-sh/bigsur/io.h
@@ -0,0 +1,35 @@
+/*
+ * include/asm-sh/io_bigsur.h
+ *
+ * By Dustin McIntire (dustin@sensoria.com) (c)2001
+ * Derived from io_hd64465.h, which bore the message:
+ * By Greg Banks <gbanks@pocketpenguins.com>
+ * (c) 2000 PocketPenguins Inc. 
+ * and from io_hd64461.h, which bore the message:
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for a Hitachi Big Sur Evaluation Board.
+ */
+
+#ifndef _ASM_SH_IO_BIGSUR_H
+#define _ASM_SH_IO_BIGSUR_H
+
+#include <linux/types.h>
+
+extern unsigned long bigsur_isa_port2addr(unsigned long offset);
+extern int bigsur_irq_demux(int irq);
+/* Provision for generic secondary demux step -- used by PCMCIA code */
+extern void bigsur_register_irq_demux(int irq,
+		int (*demux)(int irq, void *dev), void *dev);
+extern void bigsur_unregister_irq_demux(int irq);
+/* Set this variable to 1 to see port traffic */
+extern int bigsur_io_debug;
+/* Map a range of ports to a range of kernel virtual memory. */
+extern void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift);
+extern void bigsur_port_unmap(u32 baseport, u32 nports);
+
+#endif /* _ASM_SH_IO_BIGSUR_H */
+
diff --git a/include/asm-sh/bigsur/serial.h b/include/asm-sh/bigsur/serial.h
new file mode 100644
index 00000000000..540f1220592
--- /dev/null
+++ b/include/asm-sh/bigsur/serial.h
@@ -0,0 +1,27 @@
+/*
+ * include/asm-sh/serial-bigsur.h
+ *
+ * Configuration details for Big Sur 16550 based serial ports 
+ * i.e. HD64465, PCMCIA, etc.
+ */
+
+#ifndef _ASM_SERIAL_BIGSUR_H
+#define _ASM_SERIAL_BIGSUR_H
+#include <asm/hd64465.h>
+
+#define BASE_BAUD (3379200 / 16)
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+
+#define STD_SERIAL_PORT_DEFNS                   \
+        /* UART CLK   PORT IRQ     FLAGS        */                      \
+        { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ 
+
+
+#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DEFNS
+
+/* XXX: This should be moved ino irq.h */
+#define irq_cannonicalize(x) (x)
+
+#endif /* _ASM_SERIAL_BIGSUR_H */