sh: Add support for R7780RP and R7780MP boards.

This adds support for the Renesas SH7780 development boards,
R7780RP and R7780MP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

10 files changed, 236 insertions, 15 deletions

diff --git a/include/asm-sh/cpu-sh4/addrspace.h b/include/asm-sh/cpu-sh4/addrspace.h
index 727634d886c..bb2e1b03060 100644
--- a/include/asm-sh/cpu-sh4/addrspace.h
+++ b/include/asm-sh/cpu-sh4/addrspace.h
@@ -22,5 +22,8 @@
 #define P4SEG_TLB_DATA	0xf7000000
 #define P4SEG_REG_BASE	0xff000000
 
+#define PA_AREA5_IO	0xb4000000	/* Area 5 IO Memory */
+#define PA_AREA6_IO	0xb8000000	/* Area 6 IO Memory */
+
 #endif /* __ASM_CPU_SH4_ADDRSPACE_H */
 
diff --git a/include/asm-sh/cpu-sh4/dma-sh7780.h b/include/asm-sh/cpu-sh4/dma-sh7780.h
new file mode 100644
index 00000000000..6c90d28331b
--- /dev/null
+++ b/include/asm-sh/cpu-sh4/dma-sh7780.h
@@ -0,0 +1,39 @@
+#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H
+#define __ASM_SH_CPU_SH4_DMA_SH7780_H
+
+#define REQ_HE	0x000000C0
+#define REQ_H	0x00000080
+#define REQ_LE	0x00000040
+#define TM_BURST 0x0000020
+#define TS_8	0x00000000
+#define TS_16	0x00000008
+#define TS_32	0x00000010
+#define TS_16BLK	0x00000018
+#define TS_32BLK	0x00100000
+
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ *
+ * Defaults to a 64-bit transfer size.
+ */
+enum {
+	XMIT_SZ_8BIT,
+	XMIT_SZ_16BIT,
+	XMIT_SZ_32BIT,
+	XMIT_SZ_128BIT,
+	XMIT_SZ_256BIT,
+};
+
+/*
+ * The DMA count is defined as the number of bytes to transfer.
+ */
+static unsigned int __attribute__ ((used)) ts_shift[] = {
+	[XMIT_SZ_8BIT]		= 0,
+	[XMIT_SZ_16BIT]		= 1,
+	[XMIT_SZ_32BIT]		= 2,
+	[XMIT_SZ_128BIT]	= 4,
+	[XMIT_SZ_256BIT]	= 5,
+};
+
+#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */
diff --git a/include/asm-sh/cpu-sh4/dma.h b/include/asm-sh/cpu-sh4/dma.h
index 0dfe61f1480..3e4b3e6d80c 100644
--- a/include/asm-sh/cpu-sh4/dma.h
+++ b/include/asm-sh/cpu-sh4/dma.h
@@ -1,11 +1,17 @@
 #ifndef __ASM_CPU_SH4_DMA_H
 #define __ASM_CPU_SH4_DMA_H
 
+#define DMAOR_INIT	( 0x8000 | DMAOR_DME )
+
 #ifdef CONFIG_CPU_SH4A
 #define SH_DMAC_BASE	0xfc808020
+
+#define CHCR_TS_MASK	0x18
+#define CHCR_TS_SHIFT	3
+
+#include <asm/cpu/dma-sh7780.h>
 #else
 #define SH_DMAC_BASE	0xffa00000
-#endif
 
 /* Definitions for the SuperH DMAC */
 #define TM_BURST	0x0000080
@@ -19,8 +25,6 @@
 
 #define DMAOR_COD	0x00000008
 
-#define DMAOR_INIT	( 0x8000 | DMAOR_DME )
-
 /*
  * The SuperH DMAC supports a number of transmit sizes, we list them here,
  * with their respective values as they appear in the CHCR registers.
@@ -45,5 +49,6 @@ static unsigned int ts_shift[] __attribute__ ((used)) = {
 	[XMIT_SZ_32BIT]		= 2,
 	[XMIT_SZ_256BIT]	= 5,
 };
+#endif
 
 #endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/include/asm-sh/hs7751rvoip/hs7751rvoip.h b/include/asm-sh/hs7751rvoip/hs7751rvoip.h
index 69faf017147..c4cff9d3392 100644
--- a/include/asm-sh/hs7751rvoip/hs7751rvoip.h
+++ b/include/asm-sh/hs7751rvoip/hs7751rvoip.h
@@ -19,8 +19,6 @@
 #define PA_OUTPORTR	0xa400000e	/* Output Port Reguster */
 #define PA_VERREG	0xa4000014	/* FPGA Version Register */
 
-#define PA_AREA5_IO	0xb4000000	/* Area 5 IO Memory */
-#define PA_AREA6_IO	0xb8000000	/* Area 6 IO Memory */
 #define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
 
 #define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
diff --git a/include/asm-sh/irq-sh7780.h b/include/asm-sh/irq-sh7780.h
index 7f90315cd83..895c5780e45 100644
--- a/include/asm-sh/irq-sh7780.h
+++ b/include/asm-sh/irq-sh7780.h
@@ -145,11 +145,6 @@
 #define	TMU_CH5_IPR_POS		1
 #define TMU_CH5_PRIORITY	2
 
-#define	RTC_IRQ		22
-#define	RTC_IPR_ADDR	INTC_INT2PRI1
-#define	RTC_IPR_POS	0
-#define	RTC_PRIORITY	TIMER_PRIORITY
-
 /* SCIF0 */
 #define SCIF0_ERI_IRQ	40
 #define SCIF0_RXI_IRQ	41
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
index 611e67cd062..7e8455b1cb4 100644
--- a/include/asm-sh/irq.h
+++ b/include/asm-sh/irq.h
@@ -577,7 +577,7 @@ extern int ipr_irq_demux(int irq);
 #define NR_INTC2_IRQS	64
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 #define INTC2_BASE	0xffd40000
-#define INTC2_FIRST_IRQ	22
+#define INTC2_FIRST_IRQ	21
 #define INTC2_INTMSK_OFFSET	(0x38)
 #define INTC2_INTMSKCLR_OFFSET	(0x3c)
 #define NR_INTC2_IRQS	60
diff --git a/include/asm-sh/landisk/iodata_landisk.h b/include/asm-sh/landisk/iodata_landisk.h
index 9db3cdfe677..c74d3c73f37 100644
--- a/include/asm-sh/landisk/iodata_landisk.h
+++ b/include/asm-sh/landisk/iodata_landisk.h
@@ -22,8 +22,6 @@
 /* 2003.10.31 I-O DATA NSD NWG	add.	for shutdown port clear */
 #define PA_PWRINT_CLR	0xb0000006	/* Shutdown Interrupt clear Register */
 
-#define PA_AREA5_IO	0xb4000000	/* Area 5 IO Memory */
-#define PA_AREA6_IO	0xb8000000	/* Area 6 IO Memory */
 #define PA_LCD_CLRDSP	0x00		/* LCD Clear Display Offset */
 #define PA_LCD_RTNHOME	0x00		/* LCD Return Home Offset */
 #define PA_LCD_ENTMODE	0x00		/* LCD Entry Mode Offset */
diff --git a/include/asm-sh/r7780rp/ide.h b/include/asm-sh/r7780rp/ide.h
new file mode 100644
index 00000000000..a1ed78e0f61
--- /dev/null
+++ b/include/asm-sh/r7780rp/ide.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SH_R7780RP_IDE_H
+#define __ASM_SH_R7780RP_IDE_H
+
+/* Nothing to see here.. */
+#include <asm/mach/r7780rp.h>
+
+#endif /* __ASM_SH_R7780RP_IDE_H */
+
diff --git a/include/asm-sh/r7780rp/r7780rp.h b/include/asm-sh/r7780rp/r7780rp.h
new file mode 100644
index 00000000000..f95d9dba31a
--- /dev/null
+++ b/include/asm-sh/r7780rp/r7780rp.h
@@ -0,0 +1,177 @@
+#ifndef __ASM_SH_RENESAS_R7780RP_H
+#define __ASM_SH_RENESAS_R7780RP_H
+
+/*
+ * linux/include/asm-sh/r7780rp.h
+ *
+ * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
+ *
+ * Renesas Solutions Highlander R7780RP support
+ */
+
+/* Box specific addresses.  */
+#if defined(CONFIG_SH_R7780MP)
+#define PA_BCR          0xa4000000      /* FPGA */
+#define PA_IRLMSK       (PA_BCR+0x0000) /* Interrupt Mask control */
+#define PA_IRLMON       (PA_BCR+0x0002) /* Interrupt Status control */
+#define PA_IRLPRI1      (PA_BCR+0x0004) /* Interrupt Priorty 1 */
+#define PA_IRLPRI2      (PA_BCR+0x0006) /* Interrupt Priorty 2 */
+#define PA_IRLPRI3      (PA_BCR+0x0008) /* Interrupt Priorty 3 */
+#define PA_IRLPRI4      (PA_BCR+0x000a) /* Interrupt Priorty 4 */
+#define PA_RSTCTL       (PA_BCR+0x000c) /* Reset Control */
+#define PA_PCIBD        (PA_BCR+0x000e) /* PCI Board detect control */
+#define PA_PCICD        (PA_BCR+0x0010) /* PCI Conector detect control */
+#define PA_EXTGIO       (PA_BCR+0x0016) /* Extension GPIO Control */
+#define PA_IVDRMON      (PA_BCR+0x0018) /* iVDR Moniter control */
+#define PA_IVDRCTL      (PA_BCR+0x001a) /* iVDR control */
+#define PA_OBLED        (PA_BCR+0x001c) /* On Board LED control */
+#define PA_OBSW         (PA_BCR+0x001e) /* On Board Switch control */
+#define PA_AUDIOSEL     (PA_BCR+0x0020) /* Sound Interface Select control */
+#define PA_EXTPLR       (PA_BCR+0x001e) /* Extention Pin Polarity control */
+#define PA_TPCTL        (PA_BCR+0x0100) /* Touch Panel Access control */
+#define PA_TPDCKCTL     (PA_BCR+0x0102) /* Touch Panel Access data control */
+#define PA_TPCTLCLR     (PA_BCR+0x0104) /* Touch Panel Access control */
+#define PA_TPXPOS       (PA_BCR+0x0106) /* Touch Panel X position control */
+#define PA_TPYPOS       (PA_BCR+0x0108) /* Touch Panel Y position control */
+#define PA_DBSW         (PA_BCR+0x0200) /* Debug Board Switch control */
+#define PA_CFCTL        (PA_BCR+0x0300) /* CF Timing control */
+#define PA_CFPOW        (PA_BCR+0x0302) /* CF Power control */
+#define PA_CFCDINTCLR   (PA_BCR+0x0304) /* CF Insert Interrupt clear */
+#define PA_SCSMR0       (PA_BCR+0x0400) /* SCIF0 Serial mode control */
+#define PA_SCBRR0       (PA_BCR+0x0404) /* SCIF0 Bit rate control */
+#define PA_SCSCR0       (PA_BCR+0x0408) /* SCIF0 Serial control */
+#define PA_SCFTDR0      (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
+#define PA_SCFSR0       (PA_BCR+0x0410) /* SCIF0 Serial status control */
+#define PA_SCFRDR0      (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
+#define PA_SCFCR0       (PA_BCR+0x0418) /* SCIF0 FIFO control */
+#define PA_SCTFDR0      (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
+#define PA_SCRFDR0      (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
+#define PA_SCSPTR0      (PA_BCR+0x0424) /* SCIF0 Serial Port control */
+#define PA_SCLSR0       (PA_BCR+0x0428) /* SCIF0 Line Status control */
+#define PA_SCRER0       (PA_BCR+0x042c) /* SCIF0 Serial Error control */
+#define PA_SCSMR1       (PA_BCR+0x0500) /* SCIF1 Serial mode control */
+#define PA_SCBRR1       (PA_BCR+0x0504) /* SCIF1 Bit rate control */
+#define PA_SCSCR1       (PA_BCR+0x0508) /* SCIF1 Serial control */
+#define PA_SCFTDR1      (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
+#define PA_SCFSR1       (PA_BCR+0x0510) /* SCIF1 Serial status control */
+#define PA_SCFRDR1      (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
+#define PA_SCFCR1       (PA_BCR+0x0518) /* SCIF1 FIFO control */
+#define PA_SCTFDR1      (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
+#define PA_SCRFDR1      (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
+#define PA_SCSPTR1      (PA_BCR+0x0524) /* SCIF1 Serial Port control */
+#define PA_SCLSR1       (PA_BCR+0x0528) /* SCIF1 Line Status control */
+#define PA_SCRER1       (PA_BCR+0x052c) /* SCIF1 Serial Error control */
+#define PA_ICCR         (PA_BCR+0x0600) /* Serial control */
+#define PA_SAR          (PA_BCR+0x0602) /* Serial Slave control */
+#define PA_MDR          (PA_BCR+0x0604) /* Serial Mode control */
+#define PA_ADR1         (PA_BCR+0x0606) /* Serial Address1 control */
+#define PA_DAR1         (PA_BCR+0x0646) /* Serial Data1 control */
+#define PA_VERREG       (PA_BCR+0x0700) /* FPGA Version Register */
+#define PA_POFF         (PA_BCR+0x0800) /* System Power Off control */
+#define PA_PMR          (PA_BCR+0x0900) /*  */
+
+#define PA_AX88796L     0xa4100400      /* AX88796L Area */
+#define PA_SC1602BSLB   0xa6000000      /* SC1602BSLB Area */
+#define PA_AREA5_IO     0xb4000000      /* Area 5 IO Memory */
+#define PA_AREA6_IO     0xb8000000      /* Area 6 IO Memory */
+#define PA_IDE_OFFSET   0x1f0           /* CF IDE Offset */
+#define AX88796L_IO_BASE        0x1000  /* AX88796L IO Base Address */
+
+#define IRLCNTR1        (PA_BCR + 0)    /* Interrupt Control Register1 */
+
+#define IRQ_PCISLOT1    65              /* PCI Slot #1 IRQ */
+#define IRQ_PCISLOT2    66              /* PCI Slot #2 IRQ */
+#define IRQ_PCISLOT3    67              /* PCI Slot #3 IRQ */
+#define IRQ_PCISLOT4    68              /* PCI Slot #4 IRQ */
+#define IRQ_CFCARD      1               /* CF Card IRQ */
+// #define IRQ_CFINST   0               /* CF Card Insert IRQ */
+#define IRQ_TP          2               /* Touch Panel IRQ */
+#define IRQ_SCI1        3               /* SCI1 IRQ */
+#define IRQ_SCI0        4               /* SCI0 IRQ */
+#define IRQ_2SERIAL     5               /* Serial IRQ */
+#define IRQ_RTC         6               /* RTC A / B IRQ */
+#define IRQ_EXTENTION6  7               /* EXT6n IRQ */
+#define IRQ_EXTENTION5  8               /* EXT5n IRQ */
+#define IRQ_EXTENTION4  9               /* EXT4n IRQ */
+#define IRQ_EXTENTION2  10              /* EXT2n IRQ */
+#define IRQ_EXTENTION1  11              /* EXT1n IRQ */
+#define IRQ_ONETH       13              /* On board Ethernet IRQ */
+#define IRQ_PSW         14              /* Push Switch IRQ */
+
+#else /* R7780RP */
+
+#define PA_BCR		0xa5000000	/* FPGA */
+#define	PA_IRLMSK	(PA_BCR+0x0000)	/* Interrupt Mask control */
+#define PA_IRLMON	(PA_BCR+0x0002)	/* Interrupt Status control */
+#define	PA_SDPOW	(PA_BCR+0x0004)	/* SD Power control */
+#define	PA_RSTCTL	(PA_BCR+0x0006)	/* Device Reset control */
+#define	PA_PCIBD	(PA_BCR+0x0008)	/* PCI Board detect control */
+#define	PA_PCICD	(PA_BCR+0x000a)	/* PCI Conector detect control */
+#define	PA_ZIGIO1	(PA_BCR+0x000c)	/* Zigbee IO control 1 */
+#define	PA_ZIGIO2	(PA_BCR+0x000e)	/* Zigbee IO control 2 */
+#define	PA_ZIGIO3	(PA_BCR+0x0010)	/* Zigbee IO control 3 */
+#define	PA_ZIGIO4	(PA_BCR+0x0012)	/* Zigbee IO control 4 */
+#define	PA_IVDRMON	(PA_BCR+0x0014)	/* iVDR Moniter control */
+#define	PA_IVDRCTL	(PA_BCR+0x0016)	/* iVDR control */
+#define PA_OBLED	(PA_BCR+0x0018)	/* On Board LED control */
+#define PA_OBSW		(PA_BCR+0x001a)	/* On Board Switch control */
+#define PA_AUDIOSEL	(PA_BCR+0x001c)	/* Sound Interface Select control */
+#define PA_EXTPLR	(PA_BCR+0x001e)	/* Extention Pin Polarity control */
+#define PA_TPCTL	(PA_BCR+0x0100)	/* Touch Panel Access control */
+#define PA_TPDCKCTL	(PA_BCR+0x0102)	/* Touch Panel Access data control */
+#define PA_TPCTLCLR	(PA_BCR+0x0104)	/* Touch Panel Access control */
+#define PA_TPXPOS	(PA_BCR+0x0106)	/* Touch Panel X position control */
+#define PA_TPYPOS	(PA_BCR+0x0108)	/* Touch Panel Y position control */
+#define PA_DBDET	(PA_BCR+0x0200)	/* Debug Board detect control */
+#define PA_DBDISPCTL	(PA_BCR+0x0202)	/* Debug Board Dot timing control */
+#define PA_DBSW		(PA_BCR+0x0204)	/* Debug Board Switch control */
+#define PA_CFCTL	(PA_BCR+0x0300)	/* CF Timing control */
+#define PA_CFPOW	(PA_BCR+0x0302)	/* CF Power control */
+#define PA_CFCDINTCLR	(PA_BCR+0x0304)	/* CF Insert Interrupt clear */
+#define PA_SCSMR	(PA_BCR+0x0400)	/* SCIF Serial mode control */
+#define PA_SCBRR	(PA_BCR+0x0402)	/* SCIF Bit rate control */
+#define PA_SCSCR	(PA_BCR+0x0404)	/* SCIF Serial control */
+#define PA_SCFDTR	(PA_BCR+0x0406)	/* SCIF Send FIFO control */
+#define PA_SCFSR	(PA_BCR+0x0408)	/* SCIF Serial status control */
+#define PA_SCFRDR	(PA_BCR+0x040a)	/* SCIF Receive FIFO control */
+#define PA_SCFCR	(PA_BCR+0x040c)	/* SCIF FIFO control */
+#define PA_SCFDR	(PA_BCR+0x040e)	/* SCIF FIFO data control */
+#define PA_SCLSR	(PA_BCR+0x0412)	/* SCIF Line Status control */
+#define PA_ICCR		(PA_BCR+0x0500)	/* Serial control */
+#define PA_SAR		(PA_BCR+0x0502)	/* Serial Slave control */
+#define PA_MDR		(PA_BCR+0x0504)	/* Serial Mode control */
+#define PA_ADR1		(PA_BCR+0x0506)	/* Serial Address1 control */
+#define PA_DAR1		(PA_BCR+0x0546)	/* Serial Data1 control */
+#define PA_VERREG	(PA_BCR+0x0600)	/* FPGA Version Register */
+
+#define PA_AX88796L	0xa5800400	/* AX88796L Area */
+#define PA_SC1602BSLB	0xa6000000	/* SC1602BSLB Area */
+#define PA_AREA5_IO	0xb4000000	/* Area 5 IO Memory */
+#define PA_AREA6_IO	0xb8000000	/* Area 6 IO Memory */
+#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
+#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
+
+#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
+
+#define IRQ_PCISLOT1	0		/* PCI Slot #1 IRQ */
+#define IRQ_PCISLOT2	1		/* PCI Slot #2 IRQ */
+#define IRQ_PCISLOT3	2		/* PCI Slot #3 IRQ */
+#define IRQ_PCISLOT4	3		/* PCI Slot #4 IRQ */
+#define IRQ_CFCARD	4		/* CF Card IRQ */
+#define IRQ_CFINST	5		/* CF Card Insert IRQ */
+#define IRQ_M66596	6		/* M66596 IRQ */
+#define IRQ_SDCARD	7		/* SD Card IRQ */
+#define IRQ_TUCHPANEL	8		/* Touch Panel IRQ */
+#define IRQ_SCI		9		/* SCI IRQ */
+#define IRQ_2SERIAL	10		/* Serial IRQ */
+#define	IRQ_EXTENTION	11		/* EXTn IRQ */
+#define IRQ_ONETH	12		/* On board Ethernet IRQ */
+#define IRQ_PSW		13		/* Push Switch IRQ */
+#define IRQ_ZIGBEE	14		/* Ziggbee IO IRQ */
+
+#endif  /* CONFIG_SH_R7780MP */
+
+#define __IO_PREFIX	r7780rp
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_RENESAS_R7780RP */
diff --git a/include/asm-sh/rts7751r2d/rts7751r2d.h b/include/asm-sh/rts7751r2d/rts7751r2d.h
index 4e09ba597e9..b112ae221fd 100644
--- a/include/asm-sh/rts7751r2d/rts7751r2d.h
+++ b/include/asm-sh/rts7751r2d/rts7751r2d.h
@@ -41,8 +41,6 @@
 
 #define PA_AX88796L	0xaa000400	/* AX88796L Area */
 #define PA_VOYAGER	0xab000000	/* VOYAGER GX Area */
-#define PA_AREA5_IO	0xb4000000	/* Area 5 IO Memory */
-#define PA_AREA6_IO	0xb8000000	/* Area 6 IO Memory */
 #define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
 #define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */