sparc: join the remaining header files

With this commit all sparc64 header files are moved to asm-sparc.
The remaining files (71 files) were too different to be trivially
merged so divide them up in a _32.h and a _64.h file which
are both included from the file with no bit size.

The following script were used:
cd include
FILES=`wc -l asm-sparc64/*h | grep -v '^     1' | cut -b 20-`

for FILE in ${FILES}; do
  echo $FILE:
  BASE=`echo $FILE | cut -d '.' -f 1`
  FN32=${BASE}_32.h
  FN64=${BASE}_64.h
  GUARD=___ASM_SPARC_`echo $BASE | tr '-' '_' | tr [:lower:] [:upper:]`_H
  git mv asm-sparc/$FILE asm-sparc/$FN32
  git mv asm-sparc64/$FILE asm-sparc/$FN64
  echo git mv done
  printf "#ifndef %s\n" $GUARD                             >   asm-sparc/$FILE
  printf "#define %s\n" $GUARD                             >>  asm-sparc/$FILE
  printf "#if defined(__sparc__) && defined(__arch64__)\n" >>  asm-sparc/$FILE
  printf "#include <asm-sparc/%s>\n" $FN64                 >>  asm-sparc/$FILE
  printf "#else\n"                                         >>  asm-sparc/$FILE
  printf "#include <asm-sparc/%s>\n" $FN32                 >>  asm-sparc/$FILE
  printf "#endif\n"                                        >>  asm-sparc/$FILE
  printf "#endif\n"                                        >>  asm-sparc/$FILE
  git add asm-sparc/$FILE
  echo new file done
  printf "#include <asm-sparc/%s>\n" $FILE                 >  asm-sparc64/$FILE
  git add asm-sparc64/$FILE
  echo sparc64 file done
done

The guard contains three '_' to avoid conflict with existing guards.
In additing the two Kbuild files are emptied to avoid breaking
headers_* targets.
We will reintroduce the exported header files when the necessary
kbuild changes are merged.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 8 insertions, 121 deletions

diff --git a/include/asm-sparc/iommu.h b/include/asm-sparc/iommu.h
index 70c589c05a1..91b072b0d7a 100644
--- a/include/asm-sparc/iommu.h
+++ b/include/asm-sparc/iommu.h
@@ -1,121 +1,8 @@
-/* iommu.h: Definitions for the sun4m IOMMU.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-#ifndef _SPARC_IOMMU_H
-#define _SPARC_IOMMU_H
-
-#include <asm/page.h>
-#include <asm/bitext.h>
-
-/* The iommu handles all virtual to physical address translations
- * that occur between the SBUS and physical memory.  Access by
- * the cpu to IO registers and similar go over the mbus so are
- * translated by the on chip SRMMU.  The iommu and the srmmu do
- * not need to have the same translations at all, in fact most
- * of the time the translations they handle are a disjunct set.
- * Basically the iommu handles all dvma sbus activity.
- */
-
-/* The IOMMU registers occupy three pages in IO space. */
-struct iommu_regs {
-	/* First page */
-	volatile unsigned long control;    /* IOMMU control */
-	volatile unsigned long base;       /* Physical base of iopte page table */
-	volatile unsigned long _unused1[3];
-	volatile unsigned long tlbflush;   /* write only */
-	volatile unsigned long pageflush;  /* write only */
-	volatile unsigned long _unused2[1017];
-	/* Second page */
-	volatile unsigned long afsr;       /* Async-fault status register */
-	volatile unsigned long afar;       /* Async-fault physical address */
-	volatile unsigned long _unused3[2];
-	volatile unsigned long sbuscfg0;   /* SBUS configuration registers, per-slot */
-	volatile unsigned long sbuscfg1;
-	volatile unsigned long sbuscfg2;
-	volatile unsigned long sbuscfg3;
-	volatile unsigned long mfsr;       /* Memory-fault status register */
-	volatile unsigned long mfar;       /* Memory-fault physical address */
-	volatile unsigned long _unused4[1014];
-	/* Third page */
-	volatile unsigned long mid;        /* IOMMU module-id */
-};
-
-#define IOMMU_CTRL_IMPL     0xf0000000 /* Implementation */
-#define IOMMU_CTRL_VERS     0x0f000000 /* Version */
-#define IOMMU_CTRL_RNGE     0x0000001c /* Mapping RANGE */
-#define IOMMU_RNGE_16MB     0x00000000 /* 0xff000000 -> 0xffffffff */
-#define IOMMU_RNGE_32MB     0x00000004 /* 0xfe000000 -> 0xffffffff */
-#define IOMMU_RNGE_64MB     0x00000008 /* 0xfc000000 -> 0xffffffff */
-#define IOMMU_RNGE_128MB    0x0000000c /* 0xf8000000 -> 0xffffffff */
-#define IOMMU_RNGE_256MB    0x00000010 /* 0xf0000000 -> 0xffffffff */
-#define IOMMU_RNGE_512MB    0x00000014 /* 0xe0000000 -> 0xffffffff */
-#define IOMMU_RNGE_1GB      0x00000018 /* 0xc0000000 -> 0xffffffff */
-#define IOMMU_RNGE_2GB      0x0000001c /* 0x80000000 -> 0xffffffff */
-#define IOMMU_CTRL_ENAB     0x00000001 /* IOMMU Enable */
-
-#define IOMMU_AFSR_ERR      0x80000000 /* LE, TO, or BE asserted */
-#define IOMMU_AFSR_LE       0x40000000 /* SBUS reports error after transaction */
-#define IOMMU_AFSR_TO       0x20000000 /* Write access took more than 12.8 us. */
-#define IOMMU_AFSR_BE       0x10000000 /* Write access received error acknowledge */
-#define IOMMU_AFSR_SIZE     0x0e000000 /* Size of transaction causing error */
-#define IOMMU_AFSR_S        0x01000000 /* Sparc was in supervisor mode */
-#define IOMMU_AFSR_RESV     0x00f00000 /* Reserver, forced to 0x8 by hardware */
-#define IOMMU_AFSR_ME       0x00080000 /* Multiple errors occurred */
-#define IOMMU_AFSR_RD       0x00040000 /* A read operation was in progress */
-#define IOMMU_AFSR_FAV      0x00020000 /* IOMMU afar has valid contents */
-
-#define IOMMU_SBCFG_SAB30   0x00010000 /* Phys-address bit 30 when bypass enabled */
-#define IOMMU_SBCFG_BA16    0x00000004 /* Slave supports 16 byte bursts */
-#define IOMMU_SBCFG_BA8     0x00000002 /* Slave supports 8 byte bursts */
-#define IOMMU_SBCFG_BYPASS  0x00000001 /* Bypass IOMMU, treat all addresses
-					  produced by this device as pure
-					  physical. */
-
-#define IOMMU_MFSR_ERR      0x80000000 /* One or more of PERR1 or PERR0 */
-#define IOMMU_MFSR_S        0x01000000 /* Sparc was in supervisor mode */
-#define IOMMU_MFSR_CPU      0x00800000 /* CPU transaction caused parity error */
-#define IOMMU_MFSR_ME       0x00080000 /* Multiple parity errors occurred */
-#define IOMMU_MFSR_PERR     0x00006000 /* high bit indicates parity error occurred
-					  on the even word of the access, low bit
-					  indicated odd word caused the parity error */
-#define IOMMU_MFSR_BM       0x00001000 /* Error occurred while in boot mode */
-#define IOMMU_MFSR_C        0x00000800 /* Address causing error was marked cacheable */
-#define IOMMU_MFSR_RTYP     0x000000f0 /* Memory request transaction type */
-
-#define IOMMU_MID_SBAE      0x001f0000 /* SBus arbitration enable */
-#define IOMMU_MID_SE        0x00100000 /* Enables SCSI/ETHERNET arbitration */
-#define IOMMU_MID_SB3       0x00080000 /* Enable SBUS device 3 arbitration */
-#define IOMMU_MID_SB2       0x00040000 /* Enable SBUS device 2 arbitration */
-#define IOMMU_MID_SB1       0x00020000 /* Enable SBUS device 1 arbitration */
-#define IOMMU_MID_SB0       0x00010000 /* Enable SBUS device 0 arbitration */
-#define IOMMU_MID_MID       0x0000000f /* Module-id, hardcoded to 0x8 */
-
-/* The format of an iopte in the page tables */
-#define IOPTE_PAGE          0x07ffff00 /* Physical page number (PA[30:12]) */
-#define IOPTE_CACHE         0x00000080 /* Cached (in vme IOCACHE or Viking/MXCC) */
-#define IOPTE_WRITE         0x00000004 /* Writeable */
-#define IOPTE_VALID         0x00000002 /* IOPTE is valid */
-#define IOPTE_WAZ           0x00000001 /* Write as zeros */
-
-struct iommu_struct {
-	struct iommu_regs *regs;
-	iopte_t *page_table;
-	/* For convenience */
-	unsigned long start; /* First managed virtual address */
-	unsigned long end;   /* Last managed virtual address */
-
-	struct bit_map usemap;
-};
-
-static inline void iommu_invalidate(struct iommu_regs *regs)
-{
-	regs->tlbflush = 0;
-}
-
-static inline void iommu_invalidate_page(struct iommu_regs *regs, unsigned long ba)
-{
-	regs->pageflush = (ba & PAGE_MASK);
-}
-
-#endif /* !(_SPARC_IOMMU_H) */
+#ifndef ___ASM_SPARC_IOMMU_H
+#define ___ASM_SPARC_IOMMU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm-sparc/iommu_64.h>
+#else
+#include <asm-sparc/iommu_32.h>
+#endif
+#endif