diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/asm-sparc/memreg.h |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'include/asm-sparc/memreg.h')
-rw-r--r-- | include/asm-sparc/memreg.h | 52 |
1 files changed, 52 insertions, 0 deletions
diff --git a/include/asm-sparc/memreg.h b/include/asm-sparc/memreg.h new file mode 100644 index 00000000000..c0498d3baf9 --- /dev/null +++ b/include/asm-sparc/memreg.h @@ -0,0 +1,52 @@ +/* $Id: memreg.h,v 1.8 1996/08/29 09:48:23 davem Exp $ */ +#ifndef _SPARC_MEMREG_H +#define _SPARC_MEMREG_H +/* memreg.h: Definitions of the values found in the synchronous + * and asynchronous memory error registers when a fault + * occurs on the sun4c. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +/* First the synchronous error codes, these are usually just + * normal page faults. + */ + +#define SUN4C_SYNC_WDRESET 0x0001 /* watchdog reset */ +#define SUN4C_SYNC_SIZE 0x0002 /* bad access size? whuz this? */ +#define SUN4C_SYNC_PARITY 0x0008 /* bad ram chips caused a parity error */ +#define SUN4C_SYNC_SBUS 0x0010 /* the SBUS had some problems... */ +#define SUN4C_SYNC_NOMEM 0x0020 /* translation to non-existent ram */ +#define SUN4C_SYNC_PROT 0x0040 /* access violated pte protections */ +#define SUN4C_SYNC_NPRESENT 0x0080 /* pte said that page was not present */ +#define SUN4C_SYNC_BADWRITE 0x8000 /* while writing something went bogus */ + +#define SUN4C_SYNC_BOLIXED \ + (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \ + SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY) + +/* Now the asynchronous error codes, these are almost always produced + * by the cache writing things back to memory and getting a bad translation. + * Bad DVMA transactions can cause these faults too. + */ + +#define SUN4C_ASYNC_BADDVMA 0x0010 /* error during DVMA access */ +#define SUN4C_ASYNC_NOMEM 0x0020 /* write back pointed to bad phys addr */ +#define SUN4C_ASYNC_BADWB 0x0080 /* write back points to non-present page */ + +/* Memory parity error register with associated bit constants. */ +#ifndef __ASSEMBLY__ +extern __volatile__ unsigned long *sun4c_memerr_reg; +#endif + +#define SUN4C_MPE_ERROR 0x80 /* Parity error detected. (ro) */ +#define SUN4C_MPE_MULTI 0x40 /* Multiple parity errors detected. (ro) */ +#define SUN4C_MPE_TEST 0x20 /* Write inverse parity. (rw) */ +#define SUN4C_MPE_CHECK 0x10 /* Enable parity checking. (rw) */ +#define SUN4C_MPE_ERR00 0x08 /* Parity error in bits 0-7. (ro) */ +#define SUN4C_MPE_ERR08 0x04 /* Parity error in bits 8-15. (ro) */ +#define SUN4C_MPE_ERR16 0x02 /* Parity error in bits 16-23. (ro) */ +#define SUN4C_MPE_ERR24 0x01 /* Parity error in bits 24-31. (ro) */ +#define SUN4C_MPE_ERRS 0x0F /* Bit mask for the error bits. (ro) */ + +#endif /* !(_SPARC_MEMREG_H) */ |