Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 97 insertions, 0 deletions

diff --git a/include/asm-v850/gbus_int.h b/include/asm-v850/gbus_int.h
new file mode 100644
index 00000000000..0c4bce753c7
--- /dev/null
+++ b/include/asm-v850/gbus_int.h
@@ -0,0 +1,97 @@
+/*
+ * include/asm-v850/gbus_int.h -- Midas labs GBUS interrupt support
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_GBUS_INT_H__
+#define __V850_GBUS_INT_H__
+
+
+/* The GBUS interrupt interface has 32 interrupts shared among 4
+   processor interrupts.  The 32 GBUS interrupts are divided into two
+   sets of 16 each, for allocating among control registers, etc (there
+   are two of each control register, with bits 0-15 controlling an
+   interrupt each).  */
+
+/* The GBUS interrupts themselves.  */
+#define IRQ_GBUS_INT(n)		(GBUS_INT_BASE_IRQ + (n))
+#define IRQ_GBUS_INT_NUM	32
+
+/* Control registers.  */
+#define GBUS_INT_STATUS_ADDR(w)	(GBUS_INT_BASE_ADDR + (w)*0x40)
+#define GBUS_INT_STATUS(w)	(*(volatile u16 *)GBUS_INT_STATUS_ADDR(w))
+#define GBUS_INT_CLEAR_ADDR(w)	(GBUS_INT_BASE_ADDR + 0x10 + (w)*0x40)
+#define GBUS_INT_CLEAR(w)	(*(volatile u16 *)GBUS_INT_CLEAR_ADDR(w))
+#define GBUS_INT_EDGE_ADDR(w)	(GBUS_INT_BASE_ADDR + 0x20 + (w)*0x40)
+#define GBUS_INT_EDGE(w)	(*(volatile u16 *)GBUS_INT_EDGE_ADDR(w))
+#define GBUS_INT_POLARITY_ADDR(w)	(GBUS_INT_BASE_ADDR + 0x30 + (w)*0x40)
+#define GBUS_INT_POLARITY(w)	(*(volatile u16 *)GBUS_INT_POLARITY_ADDR(w))
+/* This allows enabling interrupt bits in word W for interrupt GINTn.  */
+#define GBUS_INT_ENABLE_ADDR(w, n) \
+   (GBUS_INT_BASE_ADDR + 0x100 + (w)*0x10 + (n)*0x20)
+#define GBUS_INT_ENABLE(w, n)	(*(volatile u16 *)GBUS_INT_ENABLE_ADDR(w, n))
+
+/* Mapping between kernel interrupt numbers and hardware control regs/bits.  */
+#define GBUS_INT_BITS_PER_WORD	16
+#define GBUS_INT_NUM_WORDS	(IRQ_GBUS_INT_NUM / GBUS_INT_BITS_PER_WORD)
+#define GBUS_INT_IRQ_WORD(irq)	(((irq) - GBUS_INT_BASE_IRQ) >> 4)
+#define GBUS_INT_IRQ_BIT(irq)	(((irq) - GBUS_INT_BASE_IRQ) & 0xF)
+#define GBUS_INT_IRQ_MASK(irq)	(1 << GBUS_INT_IRQ_BIT(irq))
+
+
+/* Possible priorities for GBUS interrupts.  */
+#define GBUS_INT_PRIORITY_HIGH		2
+#define GBUS_INT_PRIORITY_MEDIUM	4
+#define GBUS_INT_PRIORITY_LOW		6
+
+
+#ifndef __ASSEMBLY__
+
+/* Enable interrupt handling for interrupt IRQ.  */
+extern void gbus_int_enable_irq (unsigned irq);
+/* Disable interrupt handling for interrupt IRQ.  Note that any
+   interrupts received while disabled will be delivered once the
+   interrupt is enabled again, unless they are explicitly cleared using
+   `gbus_int_clear_pending_irq'.  */
+extern void gbus_int_disable_irq (unsigned irq);
+/* Return true if interrupt handling for interrupt IRQ is enabled.  */
+extern int gbus_int_irq_enabled (unsigned irq);
+/* Disable all GBUS irqs.  */
+extern void gbus_int_disable_irqs (void);
+/* Clear any pending interrupts for IRQ.  */
+extern void gbus_int_clear_pending_irq (unsigned irq);
+/* Return true if interrupt IRQ is pending (but disabled).  */
+extern int gbus_int_irq_pending (unsigned irq);
+
+
+struct gbus_int_irq_init {
+	const char *name;	/* name of interrupt type */
+
+	/* Range of kernel irq numbers for this type:
+	   BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM  */
+	unsigned base, num, interval;
+
+	unsigned priority;	/* interrupt priority to assign */
+};
+struct hw_interrupt_type;	/* fwd decl */
+
+/* Initialize HW_IRQ_TYPES for GBUS irqs described in array
+   INITS (which is terminated by an entry with the name field == 0).  */
+extern void gbus_int_init_irq_types (struct gbus_int_irq_init *inits,
+				     struct hw_interrupt_type *hw_irq_types);
+
+/* Initialize GBUS interrupts.  */
+extern void gbus_int_init_irqs (void);
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_GBUS_INT_H__ */