x86: unify paravirt parts of system.h

This patch moves the i386 control registers manipulation functions,
wbinvd, and clts functions to system.h. They are essentially the same
as in x86_64.

With this, system.h paravirt comes for free in x86_64.

[ mingo@elte.hu: reintroduced the cr8 bits - needed for resume images ]

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

1 files changed, 110 insertions, 0 deletions

diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h
index 3740bada097..01ba1f8e64d 100644
--- a/include/asm-x86/system.h
+++ b/include/asm-x86/system.h
@@ -3,6 +3,8 @@
 
 #include <asm/asm.h>
 
+#include <linux/kernel.h>
+
 #ifdef CONFIG_X86_32
 # include "system_32.h"
 #else
@@ -38,6 +40,8 @@ __asm__ __volatile__ ("movw %%dx,%1\n\t" \
 #define set_base(ldt, base) _set_base(((char *)&(ldt)) , (base))
 #define set_limit(ldt, limit) _set_limit(((char *)&(ldt)) , ((limit)-1))
 
+extern void load_gs_index(unsigned);
+
 /*
  * Load a segment. Fall back on loading the zero
  * segment if something goes wrong..
@@ -72,6 +76,112 @@ static inline unsigned long get_limit(unsigned long segment)
 		:"=r" (__limit):"r" (segment));
 	return __limit+1;
 }
+
+static inline void native_clts(void)
+{
+	asm volatile ("clts");
+}
+
+/*
+ * Volatile isn't enough to prevent the compiler from reordering the
+ * read/write functions for the control registers and messing everything up.
+ * A memory clobber would solve the problem, but would prevent reordering of
+ * all loads stores around it, which can hurt performance. Solution is to
+ * use a variable and mimic reads and writes to it to enforce serialization
+ */
+static unsigned long __force_order;
+
+static inline unsigned long native_read_cr0(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr0,%0\n\t" :"=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline void native_write_cr0(unsigned long val)
+{
+	asm volatile("mov %0,%%cr0": :"r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr2(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr2,%0\n\t" :"=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline void native_write_cr2(unsigned long val)
+{
+	asm volatile("mov %0,%%cr2": :"r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr3(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr3,%0\n\t" :"=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline void native_write_cr3(unsigned long val)
+{
+	asm volatile("mov %0,%%cr3": :"r" (val), "m" (__force_order));
+}
+
+static inline unsigned long native_read_cr4(void)
+{
+	unsigned long val;
+	asm volatile("mov %%cr4,%0\n\t" :"=r" (val), "=m" (__force_order));
+	return val;
+}
+
+static inline unsigned long native_read_cr4_safe(void)
+{
+	unsigned long val;
+	/* This could fault if %cr4 does not exist. In x86_64, a cr4 always
+	 * exists, so it will never fail. */
+#ifdef CONFIG_X86_32
+	asm volatile("1: mov %%cr4, %0		\n"
+		"2:				\n"
+		".section __ex_table,\"a\"	\n"
+		".long 1b,2b			\n"
+		".previous			\n"
+		: "=r" (val), "=m" (__force_order) : "0" (0));
+#else
+	val = native_read_cr4();
+#endif
+	return val;
+}
+
+static inline void native_write_cr4(unsigned long val)
+{
+	asm volatile("mov %0,%%cr4": :"r" (val), "m" (__force_order));
+}
+
+static inline void native_wbinvd(void)
+{
+	asm volatile("wbinvd": : :"memory");
+}
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define read_cr0()	(native_read_cr0())
+#define write_cr0(x)	(native_write_cr0(x))
+#define read_cr2()	(native_read_cr2())
+#define write_cr2(x)	(native_write_cr2(x))
+#define read_cr3()	(native_read_cr3())
+#define write_cr3(x)	(native_write_cr3(x))
+#define read_cr4()	(native_read_cr4())
+#define read_cr4_safe()	(native_read_cr4_safe())
+#define write_cr4(x)	(native_write_cr4(x))
+#define wbinvd()	(native_wbinvd())
+
+/* Clear the 'TS' bit */
+#define clts()		(native_clts())
+
+#endif/* CONFIG_PARAVIRT */
+
+#define stts() write_cr0(8 | read_cr0())
+
 #endif /* __KERNEL__ */
 
 static inline void clflush(void *__p)