x86, um: ... and asm-x86 move

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

4 files changed, 0 insertions, 290 deletions

diff --git a/include/asm-x86/visws/cobalt.h b/include/asm-x86/visws/cobalt.h
deleted file mode 100644
index 9627a8fe84e..00000000000
--- a/include/asm-x86/visws/cobalt.h
+++ /dev/null
@@ -1,125 +0,0 @@
-#ifndef ASM_X86__VISWS__COBALT_H
-#define ASM_X86__VISWS__COBALT_H
-
-#include <asm/fixmap.h>
-
-/*
- * Cobalt SGI Visual Workstation system ASIC
- */ 
-
-#define CO_CPU_NUM_PHYS 0x1e00
-#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2)
-
-#define CO_CPU_MAX 4
-
-#define	CO_CPU_PHYS		0xc2000000
-#define	CO_APIC_PHYS		0xc4000000
-
-/* see set_fixmap() and asm/fixmap.h */
-#define	CO_CPU_VADDR		(fix_to_virt(FIX_CO_CPU))
-#define	CO_APIC_VADDR		(fix_to_virt(FIX_CO_APIC))
-
-/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
-#define	CO_CPU_REV		0x08
-#define	CO_CPU_CTRL		0x10
-#define	CO_CPU_STAT		0x20
-#define	CO_CPU_TIMEVAL		0x30
-
-/* CO_CPU_CTRL bits */
-#define	CO_CTRL_TIMERUN		0x04		/* 0 == disabled */
-#define	CO_CTRL_TIMEMASK	0x08		/* 0 == unmasked */
-
-/* CO_CPU_STATUS bits */
-#define	CO_STAT_TIMEINTR	0x02	/* (r) 1 == int pend, (w) 0 == clear */
-
-/* CO_CPU_TIMEVAL value */
-#define	CO_TIME_HZ		100000000	/* Cobalt core rate */
-
-/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
-#define	CO_APIC_HI(n)		(((n) * 0x10) + 4)
-#define	CO_APIC_LO(n)		((n) * 0x10)
-#define	CO_APIC_ID		0x0ffc
-
-/* CO_APIC_ID bits */
-#define	CO_APIC_ENABLE		0x00000100
-
-/* CO_APIC_LO bits */
-#define	CO_APIC_MASK		0x00010000	/* 0 = enabled */
-#define	CO_APIC_LEVEL		0x00008000	/* 0 = edge */
-
-/*
- * Where things are physically wired to Cobalt
- * #defines with no board _<type>_<rev>_ are common to all (thus far)
- */
-#define	CO_APIC_IDE0		4
-#define CO_APIC_IDE1		2		/* Only on 320 */
-
-#define	CO_APIC_8259		12		/* serial, floppy, par-l-l */
-
-/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */
-#define	CO_APIC_PCIA_BASE0	0 /* and 1 */	/* slot 0, line 0 */
-#define	CO_APIC_PCIA_BASE123	5 /* and 6 */	/* slot 0, line 1 */
-
-#define	CO_APIC_PIIX4_USB	7		/* this one is weird */
-
-/* Lithium PCI Bridge B -- "the one with PIIX4" */
-#define	CO_APIC_PCIB_BASE0	8 /* and 9-12 *//* slot 0, line 0 */
-#define	CO_APIC_PCIB_BASE123	13 /* 14.15 */	/* slot 0, line 1 */
-
-#define	CO_APIC_VIDOUT0		16
-#define	CO_APIC_VIDOUT1		17
-#define	CO_APIC_VIDIN0		18
-#define	CO_APIC_VIDIN1		19
-
-#define	CO_APIC_LI_AUDIO	22
-
-#define	CO_APIC_AS		24
-#define	CO_APIC_RE		25
-
-#define CO_APIC_CPU		28		/* Timer and Cache interrupt */
-#define	CO_APIC_NMI		29
-#define	CO_APIC_LAST		CO_APIC_NMI
-
-/*
- * This is how irqs are assigned on the Visual Workstation.
- * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU).
- * All other devices (including PCI) go to Cobalt and are irq's 16 on up.
- */
-#define	CO_IRQ_APIC0	16			/* irq of apic entry 0 */
-#define	IS_CO_APIC(irq)	((irq) >= CO_IRQ_APIC0)
-#define	CO_IRQ(apic)	(CO_IRQ_APIC0 + (apic))	/* apic ent to irq */
-#define	CO_APIC(irq)	((irq) - CO_IRQ_APIC0)	/* irq to apic ent */
-#define CO_IRQ_IDE0	14			/* knowledge of... */
-#define CO_IRQ_IDE1	15			/* ... ide driver defaults! */
-#define	CO_IRQ_8259	CO_IRQ(CO_APIC_8259)
-
-#ifdef CONFIG_X86_VISWS_APIC
-static inline void co_cpu_write(unsigned long reg, unsigned long v)
-{
-	*((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
-}
-
-static inline unsigned long co_cpu_read(unsigned long reg)
-{
-	return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
-}            
-             
-static inline void co_apic_write(unsigned long reg, unsigned long v)
-{
-	*((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
-}            
-             
-static inline unsigned long co_apic_read(unsigned long reg)
-{
-	return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
-}
-#endif
-
-extern char visws_board_type;
-
-#define	VISWS_320	0
-#define	VISWS_540	1
-
-extern char visws_board_rev;
-
-#endif /* ASM_X86__VISWS__COBALT_H */
diff --git a/include/asm-x86/visws/lithium.h b/include/asm-x86/visws/lithium.h
deleted file mode 100644
index b36d3b378c6..00000000000
--- a/include/asm-x86/visws/lithium.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef ASM_X86__VISWS__LITHIUM_H
-#define ASM_X86__VISWS__LITHIUM_H
-
-#include <asm/fixmap.h>
-
-/*
- * Lithium is the SGI Visual Workstation I/O ASIC
- */
-
-#define	LI_PCI_A_PHYS		0xfc000000	/* Enet is dev 3 */
-#define	LI_PCI_B_PHYS		0xfd000000	/* PIIX4 is here */
-
-/* see set_fixmap() and asm/fixmap.h */
-#define LI_PCIA_VADDR   (fix_to_virt(FIX_LI_PCIA))
-#define LI_PCIB_VADDR   (fix_to_virt(FIX_LI_PCIB))
-
-/* Not a standard PCI? (not in linux/pci.h) */
-#define	LI_PCI_BUSNUM	0x44			/* lo8: primary, hi8: sub */
-#define LI_PCI_INTEN    0x46
-
-/* LI_PCI_INTENT bits */
-#define	LI_INTA_0	0x0001
-#define	LI_INTA_1	0x0002
-#define	LI_INTA_2	0x0004
-#define	LI_INTA_3	0x0008
-#define	LI_INTA_4	0x0010
-#define	LI_INTB		0x0020
-#define	LI_INTC		0x0040
-#define	LI_INTD		0x0080
-
-/* More special purpose macros... */
-static inline void li_pcia_write16(unsigned long reg, unsigned short v)
-{
-	*((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v;
-}
-
-static inline unsigned short li_pcia_read16(unsigned long reg)
-{
-	 return *((volatile unsigned short *)(LI_PCIA_VADDR+reg));
-}
-
-static inline void li_pcib_write16(unsigned long reg, unsigned short v)
-{
-	*((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v;
-}
-
-static inline unsigned short li_pcib_read16(unsigned long reg)
-{
-	return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
-}
-
-#endif /* ASM_X86__VISWS__LITHIUM_H */
-
diff --git a/include/asm-x86/visws/piix4.h b/include/asm-x86/visws/piix4.h
deleted file mode 100644
index 61c938045ec..00000000000
--- a/include/asm-x86/visws/piix4.h
+++ /dev/null
@@ -1,107 +0,0 @@
-#ifndef ASM_X86__VISWS__PIIX4_H
-#define ASM_X86__VISWS__PIIX4_H
-
-/*
- * PIIX4 as used on SGI Visual Workstations
- */
-
-#define	PIIX_PM_START		0x0F80
-
-#define	SIO_GPIO_START		0x0FC0
-
-#define	SIO_PM_START		0x0FC8
-
-#define	PMBASE			PIIX_PM_START
-#define	GPIREG0			(PMBASE+0x30)
-#define	GPIREG(x)		(GPIREG0+((x)/8))
-#define	GPIBIT(x)		(1 << ((x)%8))
-
-#define	PIIX_GPI_BD_ID1		18
-#define	PIIX_GPI_BD_ID2		19
-#define	PIIX_GPI_BD_ID3		20
-#define	PIIX_GPI_BD_ID4		21
-#define	PIIX_GPI_BD_REG		GPIREG(PIIX_GPI_BD_ID1)
-#define	PIIX_GPI_BD_MASK	(GPIBIT(PIIX_GPI_BD_ID1) | \
-				GPIBIT(PIIX_GPI_BD_ID2) | \
-				GPIBIT(PIIX_GPI_BD_ID3) | \
-				GPIBIT(PIIX_GPI_BD_ID4) )
-
-#define	PIIX_GPI_BD_SHIFT	(PIIX_GPI_BD_ID1 % 8)
-
-#define	SIO_INDEX		0x2e
-#define	SIO_DATA		0x2f
-
-#define	SIO_DEV_SEL		0x7
-#define	SIO_DEV_ENB		0x30
-#define	SIO_DEV_MSB		0x60
-#define	SIO_DEV_LSB		0x61
-
-#define	SIO_GP_DEV		0x7
-
-#define	SIO_GP_BASE		SIO_GPIO_START
-#define	SIO_GP_MSB		(SIO_GP_BASE>>8)
-#define	SIO_GP_LSB		(SIO_GP_BASE&0xff)
-
-#define	SIO_GP_DATA1		(SIO_GP_BASE+0)
-
-#define	SIO_PM_DEV		0x8
-
-#define	SIO_PM_BASE		SIO_PM_START
-#define	SIO_PM_MSB		(SIO_PM_BASE>>8)
-#define	SIO_PM_LSB		(SIO_PM_BASE&0xff)
-#define	SIO_PM_INDEX		(SIO_PM_BASE+0)
-#define	SIO_PM_DATA		(SIO_PM_BASE+1)
-
-#define	SIO_PM_FER2		0x1
-
-#define	SIO_PM_GP_EN		0x80
-
-
-
-/*
- * This is the dev/reg where generating a config cycle will
- * result in a PCI special cycle.
- */
-#define SPECIAL_DEV		0xff
-#define SPECIAL_REG		0x00
-
-/*
- * PIIX4 needs to see a special cycle with the following data
- * to be convinced the processor has gone into the stop grant
- * state.  PIIX4 insists on seeing this before it will power
- * down a system.
- */
-#define PIIX_SPECIAL_STOP		0x00120002
-
-#define PIIX4_RESET_PORT	0xcf9
-#define PIIX4_RESET_VAL		0x6
-
-#define PMSTS_PORT		0xf80	// 2 bytes	PM Status
-#define PMEN_PORT		0xf82	// 2 bytes	PM Enable
-#define	PMCNTRL_PORT		0xf84	// 2 bytes	PM Control
-
-#define PM_SUSPEND_ENABLE	0x2000	// start sequence to suspend state
-
-/*
- * PMSTS and PMEN I/O bit definitions.
- * (Bits are the same in both registers)
- */
-#define PM_STS_RSM		(1<<15)	// Resume Status
-#define PM_STS_PWRBTNOR		(1<<11)	// Power Button Override
-#define PM_STS_RTC		(1<<10)	// RTC status
-#define PM_STS_PWRBTN		(1<<8)	// Power Button Pressed?
-#define PM_STS_GBL		(1<<5)	// Global Status
-#define PM_STS_BM		(1<<4)	// Bus Master Status
-#define PM_STS_TMROF		(1<<0)	// Timer Overflow Status.
-
-/*
- * Stop clock GPI register
- */
-#define PIIX_GPIREG0			(0xf80 + 0x30)
-
-/*
- * Stop clock GPI bit in GPIREG0
- */
-#define	PIIX_GPI_STPCLK		0x4	// STPCLK signal routed back in
-
-#endif /* ASM_X86__VISWS__PIIX4_H */
diff --git a/include/asm-x86/visws/sgivw.h b/include/asm-x86/visws/sgivw.h
deleted file mode 100644
index 5fbf63e1003..00000000000
--- a/include/asm-x86/visws/sgivw.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * Frame buffer position and size:
- */
-extern unsigned long sgivwfb_mem_phys;
-extern unsigned long sgivwfb_mem_size;