i386/x86_64: move headers to include/asm-x86

Move the headers to include/asm-x86 and fixup the
header install make rules

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 0 insertions, 427 deletions

diff --git a/include/asm-x86_64/bitops.h b/include/asm-x86_64/bitops.h
deleted file mode 100644
index d4dbbe5f7bd..00000000000
--- a/include/asm-x86_64/bitops.h
+++ /dev/null
@@ -1,427 +0,0 @@
-#ifndef _X86_64_BITOPS_H
-#define _X86_64_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-#include <asm/alternative.h>
-
-#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1)
-/* Technically wrong, but this avoids compilation errors on some gcc
-   versions. */
-#define ADDR "=m" (*(volatile long *) addr)
-#else
-#define ADDR "+m" (*(volatile long *) addr)
-#endif
-
-/**
- * set_bit - Atomically set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * This function is atomic and may not be reordered.  See __set_bit()
- * if you do not require the atomic guarantees.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static __inline__ void set_bit(int nr, volatile void * addr)
-{
-	__asm__ __volatile__( LOCK_PREFIX
-		"btsl %1,%0"
-		:ADDR
-		:"dIr" (nr) : "memory");
-}
-
-/**
- * __set_bit - Set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * Unlike set_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __inline__ void __set_bit(int nr, volatile void * addr)
-{
-	__asm__ volatile(
-		"btsl %1,%0"
-		:ADDR
-		:"dIr" (nr) : "memory");
-}
-
-/**
- * clear_bit - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * clear_bit() is atomic and may not be reordered.  However, it does
- * not contain a memory barrier, so if it is used for locking purposes,
- * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
- * in order to ensure changes are visible on other processors.
- */
-static __inline__ void clear_bit(int nr, volatile void * addr)
-{
-	__asm__ __volatile__( LOCK_PREFIX
-		"btrl %1,%0"
-		:ADDR
-		:"dIr" (nr));
-}
-
-static __inline__ void __clear_bit(int nr, volatile void * addr)
-{
-	__asm__ __volatile__(
-		"btrl %1,%0"
-		:ADDR
-		:"dIr" (nr));
-}
-
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
-
-/**
- * __change_bit - Toggle a bit in memory
- * @nr: the bit to change
- * @addr: the address to start counting from
- *
- * Unlike change_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __inline__ void __change_bit(int nr, volatile void * addr)
-{
-	__asm__ __volatile__(
-		"btcl %1,%0"
-		:ADDR
-		:"dIr" (nr));
-}
-
-/**
- * change_bit - Toggle a bit in memory
- * @nr: Bit to change
- * @addr: Address to start counting from
- *
- * change_bit() is atomic and may not be reordered.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static __inline__ void change_bit(int nr, volatile void * addr)
-{
-	__asm__ __volatile__( LOCK_PREFIX
-		"btcl %1,%0"
-		:ADDR
-		:"dIr" (nr));
-}
-
-/**
- * test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.  
- * It also implies a memory barrier.
- */
-static __inline__ int test_and_set_bit(int nr, volatile void * addr)
-{
-	int oldbit;
-
-	__asm__ __volatile__( LOCK_PREFIX
-		"btsl %2,%1\n\tsbbl %0,%0"
-		:"=r" (oldbit),ADDR
-		:"dIr" (nr) : "memory");
-	return oldbit;
-}
-
-/**
- * __test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.  
- * If two examples of this operation race, one can appear to succeed
- * but actually fail.  You must protect multiple accesses with a lock.
- */
-static __inline__ int __test_and_set_bit(int nr, volatile void * addr)
-{
-	int oldbit;
-
-	__asm__(
-		"btsl %2,%1\n\tsbbl %0,%0"
-		:"=r" (oldbit),ADDR
-		:"dIr" (nr));
-	return oldbit;
-}
-
-/**
- * test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.  
- * It also implies a memory barrier.
- */
-static __inline__ int test_and_clear_bit(int nr, volatile void * addr)
-{
-	int oldbit;
-
-	__asm__ __volatile__( LOCK_PREFIX
-		"btrl %2,%1\n\tsbbl %0,%0"
-		:"=r" (oldbit),ADDR
-		:"dIr" (nr) : "memory");
-	return oldbit;
-}
-
-/**
- * __test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to clear
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.  
- * If two examples of this operation race, one can appear to succeed
- * but actually fail.  You must protect multiple accesses with a lock.
- */
-static __inline__ int __test_and_clear_bit(int nr, volatile void * addr)
-{
-	int oldbit;
-
-	__asm__(
-		"btrl %2,%1\n\tsbbl %0,%0"
-		:"=r" (oldbit),ADDR
-		:"dIr" (nr));
-	return oldbit;
-}
-
-/* WARNING: non atomic and it can be reordered! */
-static __inline__ int __test_and_change_bit(int nr, volatile void * addr)
-{
-	int oldbit;
-
-	__asm__ __volatile__(
-		"btcl %2,%1\n\tsbbl %0,%0"
-		:"=r" (oldbit),ADDR
-		:"dIr" (nr) : "memory");
-	return oldbit;
-}
-
-/**
- * test_and_change_bit - Change a bit and return its old value
- * @nr: Bit to change
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.  
- * It also implies a memory barrier.
- */
-static __inline__ int test_and_change_bit(int nr, volatile void * addr)
-{
-	int oldbit;
-
-	__asm__ __volatile__( LOCK_PREFIX
-		"btcl %2,%1\n\tsbbl %0,%0"
-		:"=r" (oldbit),ADDR
-		:"dIr" (nr) : "memory");
-	return oldbit;
-}
-
-#if 0 /* Fool kernel-doc since it doesn't do macros yet */
-/**
- * test_bit - Determine whether a bit is set
- * @nr: bit number to test
- * @addr: Address to start counting from
- */
-static int test_bit(int nr, const volatile void * addr);
-#endif
-
-static __inline__ int constant_test_bit(int nr, const volatile void * addr)
-{
-	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
-}
-
-static __inline__ int variable_test_bit(int nr, volatile const void * addr)
-{
-	int oldbit;
-
-	__asm__ __volatile__(
-		"btl %2,%1\n\tsbbl %0,%0"
-		:"=r" (oldbit)
-		:"m" (*(volatile long *)addr),"dIr" (nr));
-	return oldbit;
-}
-
-#define test_bit(nr,addr) \
-(__builtin_constant_p(nr) ? \
- constant_test_bit((nr),(addr)) : \
- variable_test_bit((nr),(addr)))
-
-#undef ADDR
-
-extern long find_first_zero_bit(const unsigned long * addr, unsigned long size);
-extern long find_next_zero_bit (const unsigned long * addr, long size, long offset);
-extern long find_first_bit(const unsigned long * addr, unsigned long size);
-extern long find_next_bit(const unsigned long * addr, long size, long offset);
-
-/* return index of first bet set in val or max when no bit is set */
-static inline unsigned long __scanbit(unsigned long val, unsigned long max)
-{
-	asm("bsfq %1,%0 ; cmovz %2,%0" : "=&r" (val) : "r" (val), "r" (max));
-	return val;
-}
-
-#define find_first_bit(addr,size) \
-((__builtin_constant_p(size) && (size) <= BITS_PER_LONG ? \
-  (__scanbit(*(unsigned long *)addr,(size))) : \
-  find_first_bit(addr,size)))
-
-#define find_next_bit(addr,size,off) \
-((__builtin_constant_p(size) && (size) <= BITS_PER_LONG ? 	  \
-  ((off) + (__scanbit((*(unsigned long *)addr) >> (off),(size)-(off)))) : \
-	find_next_bit(addr,size,off)))
-
-#define find_first_zero_bit(addr,size) \
-((__builtin_constant_p(size) && (size) <= BITS_PER_LONG ? \
-  (__scanbit(~*(unsigned long *)addr,(size))) : \
-  	find_first_zero_bit(addr,size)))
-	
-#define find_next_zero_bit(addr,size,off) \
-((__builtin_constant_p(size) && (size) <= BITS_PER_LONG ? 	  \
-  ((off)+(__scanbit(~(((*(unsigned long *)addr)) >> (off)),(size)-(off)))) : \
-	find_next_zero_bit(addr,size,off)))
-
-/* 
- * Find string of zero bits in a bitmap. -1 when not found.
- */ 
-extern unsigned long 
-find_next_zero_string(unsigned long *bitmap, long start, long nbits, int len);
-
-static inline void set_bit_string(unsigned long *bitmap, unsigned long i, 
-				  int len) 
-{ 
-	unsigned long end = i + len; 
-	while (i < end) {
-		__set_bit(i, bitmap); 
-		i++;
-	}
-} 
-
-static inline void __clear_bit_string(unsigned long *bitmap, unsigned long i, 
-				    int len) 
-{ 
-	unsigned long end = i + len; 
-	while (i < end) {
-		__clear_bit(i, bitmap); 
-		i++;
-	}
-} 
-
-/**
- * ffz - find first zero in word.
- * @word: The word to search
- *
- * Undefined if no zero exists, so code should check against ~0UL first.
- */
-static __inline__ unsigned long ffz(unsigned long word)
-{
-	__asm__("bsfq %1,%0"
-		:"=r" (word)
-		:"r" (~word));
-	return word;
-}
-
-/**
- * __ffs - find first bit in word.
- * @word: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static __inline__ unsigned long __ffs(unsigned long word)
-{
-	__asm__("bsfq %1,%0"
-		:"=r" (word)
-		:"rm" (word));
-	return word;
-}
-
-/*
- * __fls: find last bit set.
- * @word: The word to search
- *
- * Undefined if no zero exists, so code should check against ~0UL first.
- */
-static __inline__ unsigned long __fls(unsigned long word)
-{
-	__asm__("bsrq %1,%0"
-		:"=r" (word)
-		:"rm" (word));
-	return word;
-}
-
-#ifdef __KERNEL__
-
-#include <asm-generic/bitops/sched.h>
-
-/**
- * ffs - find first bit set
- * @x: the word to search
- *
- * This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
- */
-static __inline__ int ffs(int x)
-{
-	int r;
-
-	__asm__("bsfl %1,%0\n\t"
-		"cmovzl %2,%0" 
-		: "=r" (r) : "rm" (x), "r" (-1));
-	return r+1;
-}
-
-/**
- * fls64 - find last bit set in 64 bit word
- * @x: the word to search
- *
- * This is defined the same way as fls.
- */
-static __inline__ int fls64(__u64 x)
-{
-	if (x == 0)
-		return 0;
-	return __fls(x) + 1;
-}
-
-/**
- * fls - find last bit set
- * @x: the word to search
- *
- * This is defined the same way as ffs.
- */
-static __inline__ int fls(int x)
-{
-	int r;
-
-	__asm__("bsrl %1,%0\n\t"
-		"cmovzl %2,%0"
-		: "=&r" (r) : "rm" (x), "rm" (-1));
-	return r+1;
-}
-
-#define ARCH_HAS_FAST_MULTIPLIER 1
-
-#include <asm-generic/bitops/hweight.h>
-
-#endif /* __KERNEL__ */
-
-#ifdef __KERNEL__
-
-#include <asm-generic/bitops/ext2-non-atomic.h>
-
-#define ext2_set_bit_atomic(lock,nr,addr) \
-	        test_and_set_bit((nr),(unsigned long*)addr)
-#define ext2_clear_bit_atomic(lock,nr,addr) \
-	        test_and_clear_bit((nr),(unsigned long*)addr)
-
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _X86_64_BITOPS_H */