[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 6

The attached patches provides part 6 of an architecture implementation for the
Tensilica Xtensa CPU series.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 537 insertions, 0 deletions

diff --git a/include/asm-xtensa/unistd.h b/include/asm-xtensa/unistd.h
new file mode 100644
index 00000000000..64c64dd83ba
--- /dev/null
+++ b/include/asm-xtensa/unistd.h
@@ -0,0 +1,537 @@
+/*
+ * include/asm-xtensa/unistd.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_UNISTD_H
+#define _XTENSA_UNISTD_H
+
+#include <linux/linkage.h>
+
+//#define __NR_setup		  0 /* used only by init, to get system going */
+#define __NR_spill		  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_oldumount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit	 	 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_cacheflush         147
+#define __NR_cachectl           148
+#define __NR_sysxtensa          149
+#define __NR_sysdummy           150
+#define __NR_getsid		151
+#define __NR_fdatasync		152
+#define __NR__sysctl		153
+#define __NR_mlock		154
+#define __NR_munlock		155
+#define __NR_mlockall		156
+#define __NR_munlockall		157
+#define __NR_sched_setparam		158
+#define __NR_sched_getparam		159
+#define __NR_sched_setscheduler		160
+#define __NR_sched_getscheduler		161
+#define __NR_sched_yield		162
+#define __NR_sched_get_priority_max	163
+#define __NR_sched_get_priority_min	164
+#define __NR_sched_rr_get_interval	165
+#define __NR_nanosleep		166
+#define __NR_mremap		167
+#define __NR_accept             168
+#define __NR_bind               169
+#define __NR_connect            170
+#define __NR_getpeername        171
+#define __NR_getsockname        172
+#define __NR_getsockopt         173
+#define __NR_listen             174
+#define __NR_recv               175
+#define __NR_recvfrom           176
+#define __NR_recvmsg            177
+#define __NR_send               178
+#define __NR_sendmsg            179
+#define __NR_sendto             180
+#define __NR_setsockopt         181
+#define __NR_shutdown           182
+#define __NR_socket             183
+#define __NR_socketpair         184
+#define __NR_setresuid		185
+#define __NR_getresuid		186
+#define __NR_query_module	187
+#define __NR_poll		188
+#define __NR_nfsservctl		189
+#define __NR_setresgid		190
+#define __NR_getresgid		191
+#define __NR_prctl              192
+#define __NR_rt_sigreturn	193
+#define __NR_rt_sigaction	194
+#define __NR_rt_sigprocmask	195
+#define __NR_rt_sigpending	196
+#define __NR_rt_sigtimedwait	197
+#define __NR_rt_sigqueueinfo	198
+#define __NR_rt_sigsuspend	199
+#define __NR_pread		200
+#define __NR_pwrite		201
+#define __NR_chown		202
+#define __NR_getcwd		203
+#define __NR_capget		204
+#define __NR_capset		205
+#define __NR_sigaltstack	206
+#define __NR_sendfile		207
+#define __NR_streams1		208	/* some people actually want it */
+#define __NR_streams2		209	/* some people actually want it */
+#define __NR_mmap2		210
+#define __NR_truncate64		211
+#define __NR_ftruncate64	212
+#define __NR_stat64		213
+#define __NR_lstat64		214
+#define __NR_fstat64		215
+#define __NR_pivot_root		216
+#define __NR_mincore		217
+#define __NR_madvise		218
+#define __NR_getdents64		219
+#define __NR_vfork		220
+
+/* Keep this last; should always equal the last valid call number. */
+#define __NR_Linux_syscalls     220
+
+/* user-visible error numbers are in the range -1 - -125: see
+ * <asm-xtensa/errno.h> */
+
+#define SYSXTENSA_RESERVED	   0	/* don't use this */
+#define SYSXTENSA_ATOMIC_SET	   1	/* set variable */
+#define SYSXTENSA_ATOMIC_EXG_ADD   2	/* exchange memory and add */
+#define SYSXTENSA_ATOMIC_ADD	   3	/* add to memory */
+#define SYSXTENSA_ATOMIC_CMP_SWP   4	/* compare and swap */
+
+#define SYSXTENSA_COUNT		   5	/* count of syscall0 functions*/
+
+#ifdef __KERNEL__
+#define __syscall_return(type, res) return ((type)(res))
+#else
+#define __syscall_return(type, res) \
+do { \
+	if ((unsigned long)(res) >= (unsigned long)(-125)) { \
+	/* Avoid using "res" which is declared to be in register r2; \
+	 * errno might expand to a function call and clobber it.  */ \
+		int __err = -(res); \
+		errno = __err; \
+		res = -1; \
+	} \
+	return (type) (res); \
+} while (0)
+#endif
+
+
+/* Tensilica's xt-xcc compiler is much more agressive at code
+ * optimization than gcc.  Multiple __asm__ statements are
+ * insufficient for xt-xcc because subsequent optimization passes
+ * (beyond the front-end that knows of __asm__ statements and other
+ * such GNU Extensions to C) can modify the register selection for
+ * containment of C variables.
+ *
+ * xt-xcc cannot modify the contents of a single __asm__ statement, so
+ * we create single-asm versions of the syscall macros that are
+ * suitable and optimal for both xt-xcc and gcc.
+ *
+ * Linux takes system-call arguments in registers.  The following
+ * design is optimized for user-land apps (e.g., glibc) which
+ * typically have a function wrapper around the "syscall" assembly
+ * instruction.  It satisfies the Xtensa ABI while minizing argument
+ * shifting.
+ *
+ * The Xtensa ABI and software conventions require the system-call
+ * number in a2.  If an argument exists in a2, we move it to the next
+ * available register.  Note that for improved efficiency, we do NOT
+ * shift all parameters down one register to maintain the original
+ * order.
+ *
+ * At best case (zero arguments), we just write the syscall number to
+ * a2.  At worst case (1 to 6 arguments), we move the argument in a2
+ * to the next available register, then write the syscall number to
+ * a2.
+ *
+ * For clarity, the following truth table enumerates all possibilities.
+ *
+ * arguments	syscall number	arg0, arg1, arg2, arg3, arg4, arg5
+ * ---------	--------------	----------------------------------
+ *	0	      a2
+ *	1	      a2	a3
+ *	2	      a2	a4,   a3
+ *	3	      a2	a5,   a3,   a4
+ *	4	      a2	a6,   a3,   a4,   a5
+ *	5	      a2	a7,   a3,   a4,   a5,   a6
+ *	6	      a2	a8,   a3,   a4,   a5,   a6,   a7
+ */
+
+#define _syscall0(type,name) \
+type name(void) \
+{ \
+long __res; \
+__asm__ __volatile__ ( \
+	"  movi  a2, %1 \n" \
+	"  syscall      \n" \
+	"  mov   %0, a2 \n" \
+	: "=a" (__res) \
+	: "i" (__NR_##name) \
+	: "a2" \
+	); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall1(type,name,type0,arg0) \
+type name(type0 arg0) \
+{ \
+long __res; \
+__asm__ __volatile__ ( \
+	"  mov   a3, %2 \n" \
+	"  movi  a2, %1 \n" \
+	"  syscall      \n" \
+	"  mov   %0, a2 \n" \
+	: "=a" (__res) \
+	: "i" (__NR_##name), "a" (arg0) \
+	: "a2", "a3" \
+	); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall2(type,name,type0,arg0,type1,arg1) \
+type name(type0 arg0,type1 arg1) \
+{ \
+long __res; \
+__asm__ __volatile__ ( \
+	"  mov   a4, %2 \n" \
+	"  mov   a3, %3 \n" \
+	"  movi  a2, %1 \n" \
+	"  syscall      \n" \
+	"  mov   %0, a2 \n" \
+	: "=a" (__res) \
+	: "i" (__NR_##name), "a" (arg0), "a" (arg1) \
+	: "a2", "a3", "a4" \
+	); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall3(type,name,type0,arg0,type1,arg1,type2,arg2) \
+type name(type0 arg0,type1 arg1,type2 arg2) \
+{ \
+long __res; \
+__asm__ __volatile__ ( \
+	"  mov   a5, %2 \n" \
+	"  mov   a4, %4 \n" \
+	"  mov   a3, %3 \n" \
+	"  movi  a2, %1 \n" \
+	"  syscall      \n" \
+	"  mov   %0, a2 \n" \
+	: "=a" (__res) \
+	: "i" (__NR_##name), "a" (arg0), "a" (arg1), "a" (arg2) \
+	: "a2", "a3", "a4", "a5" \
+	); \
+__syscall_return(type,__res); \
+}
+
+#define _syscall4(type,name,type0,arg0,type1,arg1,type2,arg2,type3,arg3) \
+type name(type0 arg0,type1 arg1,type2 arg2,type3 arg3) \
+{ \
+long __res; \
+__asm__ __volatile__ ( \
+	"  mov   a6, %2 \n" \
+	"  mov   a5, %5 \n" \
+	"  mov   a4, %4 \n" \
+	"  mov   a3, %3 \n" \
+	"  movi  a2, %1 \n" \
+	"  syscall      \n" \
+	"  mov   %0, a2 \n" \
+	: "=a" (__res) \
+	: "i" (__NR_##name), "a" (arg0), "a" (arg1), "a" (arg2), "a" (arg3) \
+	: "a2", "a3", "a4", "a5", "a6" \
+	); \
+__syscall_return(type,__res); \
+}
+
+/* Note that we save and restore the a7 frame pointer.
+ * Including a7 in the clobber list doesn't do what you'd expect.
+ */
+#define _syscall5(type,name,type0,arg0,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
+type name(type0 arg0,type1 arg1,type2 arg2,type3 arg3,type4 arg4) \
+{ \
+long __res; \
+__asm__ __volatile__ ( \
+	"  mov   a9, a7 \n" \
+	"  mov   a7, %2 \n" \
+	"  mov   a6, %6 \n" \
+	"  mov   a5, %5 \n" \
+	"  mov   a4, %4 \n" \
+	"  mov   a3, %3 \n" \
+	"  movi  a2, %1 \n" \
+	"  syscall      \n" \
+	"  mov   a7, a9 \n" \
+	"  mov   %0, a2 \n" \
+	: "=a" (__res) \
+	: "i" (__NR_##name), "a" (arg0), "a" (arg1), "a" (arg2), \
+                             "a" (arg3), "a" (arg4) \
+	: "a2", "a3", "a4", "a5", "a6", "a9" \
+	); \
+__syscall_return(type,__res); \
+}
+
+/* Note that we save and restore the a7 frame pointer.
+ * Including a7 in the clobber list doesn't do what you'd expect.
+ */
+#define _syscall6(type,name,type0,arg0,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \
+type name(type0 arg0,type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5) \
+{ \
+long __res; \
+__asm__ __volatile__ ( \
+	"  mov   a9, a7 \n" \
+	"  mov   a8, %2 \n" \
+	"  mov   a7, %7 \n" \
+	"  mov   a6, %6 \n" \
+	"  mov   a5, %5 \n" \
+	"  mov   a4, %4 \n" \
+	"  mov   a3, %3 \n" \
+	"  movi  a2, %1 \n" \
+	"  syscall      \n" \
+	"  mov   a7, a9 \n" \
+	"  mov   %0, a2 \n" \
+	: "=a" (__res) \
+	: "i" (__NR_##name), "a" (arg0), "a" (arg1), "a" (arg2), \
+                             "a" (arg3), "a" (arg4), "a" (arg5)  \
+	: "a2", "a3", "a4", "a5", "a6", "a8", "a9" \
+	); \
+__syscall_return(type,__res); \
+}
+
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/syscalls.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+
+#define __NR__exit __NR_exit
+
+static __inline__ _syscall0(int,pause)
+//static __inline__ _syscall1(int,setup,int,magic) FIXME
+static __inline__ _syscall0(int,sync)
+static __inline__ _syscall0(pid_t,setsid)
+static __inline__ _syscall3(int,write,int,fd,const char *,buf,off_t,count)
+static __inline__ _syscall3(int,read,int,fd,char *,buf,off_t,count)
+static __inline__ _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
+static __inline__ _syscall1(int,dup,int,fd)
+static __inline__ _syscall3(int,execve,const char*,file,char**,argv,char**,envp)
+static __inline__ _syscall3(int,open,const char *,file,int,flag,int,mode)
+static __inline__ _syscall1(int,close,int,fd)
+static __inline__ _syscall1(int,_exit,int,exitcode)
+static __inline__ _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
+static __inline__ _syscall1(int,delete_module,const char *,name)
+
+struct stat;
+static __inline__ _syscall2(int,fstat,int,fd,struct stat *,buf)
+static __inline__ _syscall0(pid_t,getpid)
+static __inline__ _syscall2(int,kill,int,pid,int,sig)
+static __inline__ _syscall2(int,stat,const char *, path,struct stat *,buf)
+static __inline__ _syscall1(int,unlink,char *,pathname)
+
+
+
+extern pid_t waitpid(int, int*, int );
+static __inline__ pid_t wait(int * wait_stat)
+{
+	return waitpid(-1,wait_stat,0);
+}
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+
+
+#endif	/* _XTENSA_UNISTD_H */